summaryrefslogtreecommitdiff
path: root/sound/pci/hda/patch_realtek.c
AgeCommit message (Collapse)Author
2008-06-09[ALSA] hda - Fix "alc262_sony_unsol[]" hda_verb arrayAkio Idehara
I think that hda_verb array must have "terminator (empty array)". But alc262_sony_unsol[] does not have it. And it causes gcc-4.3's buggy behavior with snd_hda_sequence_write(). Signed-off-by: Akio Idehara <zbe64533@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-04[ALSA] hda - COMPAL IFL90/JFL-92 laptop quirkTony Vroon
Use quirk table to assign ALC268_TOSHIBA to COMPAL IFL90/JFL-92 laptops. No analog output on autoprobe. Signed-off-by: Tony Vroon <tony@linx.net> Tested-by: Guri <gurashka@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-03[ALSA] hda - Fix resume of auto-config mode with Realtek codecsTakashi Iwai
The auto-config mode of Realtek ALC codecs has a bug since 2.6.25 that it cannot resume properly. The problem was the wrong assignment of init_hook that overrides the whole initialization. Relevant bug reports: http://bugzilla.kernel.org/show_bug.cgi?id=10662 https://bugzilla.novell.com/show_bug.cgi?id=385473 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-24[ALSA] hda - Added support for Foxconn P35AX-S mainboardTravis Place
Added IDs for the Foxconn P35AX-S mainboard to patch_realtek.c, so that ALC883_6ST_DIG is used by default. Signed-off-by: Travis Place <wishie@wishie.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-24[ALSA] hda - Fix COEF and EAPD in ALC889 auto-configuration modeTakashi Iwai
Fix the missing COEF and EAPD initialization in ALC889 auto-configuration mode. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-20[ALSA] hda - Fix ASUS P5GD1 modelTravis Place
Corrected the model assignment for the ASUS P5GD1 w/SPDIF after reports of surround sound not being possible. Signed-off-by: Travis Place <wishie@wishie.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-20[ALSA] hda - Fix ALC262 fujitsu modelTakashi Iwai
Fixed the speaker auto-mute with two laptop and docking headphones. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Tony Vroon <tony@linx.net>
2008-05-05[ALSA] Revert migration to alc_set_pin_output() in ↵Jacek Luczak
alc861_auto_set_output_and_unmute() Change done by: commit f6c7e5461e9046445d50c5c7a9a4587824239623 [ALSA] hda-codec - Fix auto-configuration of Realtek codecs broke sound on ALC861 Analog. Signed-off-by: Jacek Luczak <luczak.jacek@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-29[ALSA] hda - Add support of Medion RIM 2150Takashi Iwai
Added the support of Medion RIM 2150 laptop with ALC880 codec. ALSA bug#3708: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3708 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda - Fix model for Acer Aspire 5720zTakashi Iwai
Set the proper model=acer for Acer Aspire 5720z with ALC268 codec. ALSA bug#3550: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3550 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda - Avoid unexpected breakage with ALC889A hackTakashi Iwai
The last ALC889A hack may break on some devices with certain model presets since patch_alc*() have different model tables. So, now it's handled in the original patch_alc882() but fly to patch_alc883() in model=auto appropriately. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda - Fix ALC889A codec supportTakashi Iwai
ALC889A is recognized ALC885/ALC882 but it's actually closer to ALC888/ALC883. Cc: Kasper Sandberg <lkml@metanurb.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-intel: Add Quanta IL1 ALC267 modelHerton Ronaldo Krzesinski
This adds support for Quanta IL1 mini-notebook to alsa, defining a new model for it. It comes with an ALC267 codec chip. Some notes about this model: * In headphone automute, I use AC_VERB_SET_PIN_WIDGET_CONTROL instead of common amp mute, to avoid conflict with mixer switch (mixer and automute use the same nid). * The only connected capture sources in the hardware are the internal mic and external mic jack. So instead of using an input source selector like on other ALC268 models, the mic automute automatically switch between captures. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda - Fujitsu Lifebook PC speaker signalTony Vroon
The legacy PC speaker signal was not routed to outputs. The codec is not prevented from powering down in this patch, although I suppose one could argue that perhaps it should be. Let me know if anyone feels strongly one way or the other. Signed-off-by: Tony Vroon <tony@linx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda - Should use HDA_OUTPUT instead of HDA_INPUT to mute pin 15 of ALC880Jiang zhe
To mute the output of Pin widget 15 in ALC880, we should use the HDA_OUTPUT. However, current code looks like : snd_hda_codec_amp_stereo(codec, 0x15, HDA_INPUT, 0, HDA_AMP_MUTE, bits); It may be a misspelling. Signed-off-by: Jiang zhe <zhe.jiang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - PCI quirk for MSI laptopJiang zhe
Please refer to [0003848] on the alsa mantis. This patch adds the pci quirk and Mic-Int controller. Signed-off-by: Jiang zhe <zhe.jiang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Support mic automute for Clevo M720R/SRHerton Ronaldo Krzesinski
Add support for mic automute in clevo-m720r ALC883 model, and rename it to more generic clevo-m720. Also change model entry in ALSA-Configuration.txt accordingly. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Map clevo-m720r ALC883 model for Clevo M720SRHerton Ronaldo Krzesinski
Map clevo-m720r ALC883 model for Clevo M720SR. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Use common 3stack-6ch mixer for 3stack-hp modelHerton Ronaldo Krzesinski
Forgot one more: 3stack-hp model also have now the same mixer as 3stack-6ch (after DAC assignment fix in ALC883), so use it avoiding duplicating the same mixer definition. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Use base ALC883 mixer for 6stack-dell modelHerton Ronaldo Krzesinski
After DAC assignment fix in ALC883, alc888_6st_dell_mixer is now the same as alc883_base_mixer. Avoid duplicated code and use alc883_base_mixer in 6stack-dell model, removing alc888_6st_dell_mixer definition. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Remove now uneeded 6stack-hp model from ALC883Herton Ronaldo Krzesinski
After DAC assignment fix in ALC883, the 6stack-hp model is now the same as 6stack-dig. So just remove 6stack-hp model and replace its use with 6stack-dig. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - model for alc262 to support Lenovo 3000Jiang zhe
This model is to support the Lenovo 3000 y410. ALSA bug#3856: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3856 Signed-off-by: Jiang zhe <zhe.jiang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - keep the format verb at closing PCM streamsTakashi Iwai
Keep the format verb at closing PCM streams. Introduced snd_hda_codec_cleanup_stream() for the parcicular purpose. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Map 3stack-6ch-dig ALC883 model for MSI 945GCM5 V2 (MSI-7267)Herton Ronaldo Krzesinski
Map 3stack-6ch-dig ALC883 model for MSI 945GCM5 V2 (MSI-7267). Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Fix DAC assignment order in ALC883Herton Ronaldo Krzesinski
Actually clfe and surround DACs are inverted in alc883_dac_nids array (see ALC883 datasheet). I discovered this while testing multi-channel setup (using 3stack-6ch-dig model) on MSI 945GCM5 V2 motherboard that has an ALC883 codec. Simply Rear Left/Right and Center/LFE were swapped in 6 channel mode (also in 4 channel mode you didn't get rear left/right output). Other models also were affected by this bug, as can be seen by the mixer layouts that "workaround" this (the real bug was not noticed, and some other models simply played with mixer and initial verbs). Thus along with fixing the order of dac nids, also change the models that relied on previous dac ordering properly. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Fujitsu Lifebook port replicator/dock headphone jack senseTony Vroon
The docking station headphone output had no audio and jack sense was not considered. Jack information from the laptop itself and the dock are combined, as the dock does not obscure the connector. Signed-off-by: Tony Vroon <tony@linx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Map 3stack-6ch-dig ALC662 model for Asus P5GC-MXHerton Ronaldo Krzesinski
Map 3stack-6ch-dig ALC662 model for Asus P5GC-MX. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Fix ALC662 DAC mixer mutesHerton Ronaldo Krzesinski
Currently ALC662 doesn't suport amp mute for AmpOut in nids 0x02, 0x03, 0x04 (see block diagram in ALC662 datasheet page 3, does M correspond to mute?). The result is that currently mute for "Front Playback Switch", "Surround Playback Switch", "Center Playback Switch" and "LFE Playback Switch" mixer items doesn't work (tested on Asus P5GC-MX motherboard with 3stack-6ch model). The solution I found for this is to mute the proper inputs in 0x0c, 0x0d, 0x0e audio mixers. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Improve ALC262 ultra modelTakashi Iwai
Improved ALC262 ultra model for Samsung Q1 Ultra series. - clean up mixers - support of input from HP jack as a mic - add quirk for Q1 EL Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-intel - Fix microphone capture with ALC880 F1734 modelMichael Gruber
The default capture source should be the mic which is 0x01 on this model. In addition to that the change to VREF50 allows for higher capture volume. Signed-off-by: Michael Gruber <lists.mg@googlemail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] HDA Codecs: add support for Toshiba Equium L30Tobin Davis
This patch adds support for the Toshiba Equium L30 laptop and renames the mixer controls to match Laptop usages. Signed-off-by: Tobin Davis <tdavis@dsl-only.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Add internal mic item for ALC268 acer modelTakashi Iwai
Added the internal mic as a capture source item for ALC268 acer model. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Fix dmics on ALC268 in auto configurationTakashi Iwai
Fixed the handling of dmics on ALC268 in the auto-configuration mode. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - model for alc883 to support FUJITSU Pi2515Jiang zhe
There is no suitable model for Pi2515. This model is to support it. ALSA bug#3800. Signed-off-by: Jiang zhe <zhe.jiang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] ALC288 - Add NEC S970 to the quirk tablePascal Terjan
NEC S970 has no sound in the internal speakers when autodetection is used. With targa-dig model, there is sound in the speakers and it gets correctly muted when pluging headphones. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - model for alc883 to support M720RJiang zhe
There is no suitable model for M720R (ALSA bug#3781). This patch is to support HP jack-sensing and mixer. Signed-off-by: Jiang zhe <zhe.jiang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] sound: hda: missing includes of hda_patch.hHarvey Harrison
Move the array declaration to hda_codec.c where it is used and add includes where the individual presets are declared. Fixes the following sparse warnings: sound/pci/hda/patch_realtek.c:13744:25: warning: symbol 'snd_hda_preset_realtek' was not declared. Should it be static? sound/pci/hda/patch_cmedia.c:729:25: warning: symbol 'snd_hda_preset_cmedia' was not declared. Should it be static? sound/pci/hda/patch_analog.c:3656:25: warning: symbol 'snd_hda_preset_analog' was not declared. Should it be static? sound/pci/hda/patch_sigmatel.c:3995:25: warning: symbol 'snd_hda_preset_sigmatel' was not declared. Should it be static? sound/pci/hda/patch_si3054.c:286:25: warning: symbol 'snd_hda_preset_si3054' was not declared. Should it be static? sound/pci/hda/patch_atihdmi.c:156:25: warning: symbol 'snd_hda_preset_atihdmi' was not declared. Should it be static? sound/pci/hda/patch_conexant.c:1721:25: warning: symbol 'snd_hda_preset_conexant' was not declared. Should it be static? sound/pci/hda/patch_via.c:1962:25: warning: symbol 'snd_hda_preset_via' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Don't create multiple capture streams for single inputsTakashi Iwai
When the device has only one input source, it makes no sense to have multiple capture streams. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Fix ALC268 capture sourceTakashi Iwai
Initialize the capture source properly for auto model. It's especially important for cases that only mic is detected. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Add beep volume control to ALC268Takashi Iwai
Added the beep volume control to ALC268 codec support code. Since the codec doesn't return the correct AMP caps, we need to override the value. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Fix ALC662 recordingKailang Yang
Fixed ALC662 recording issue. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] Keep private TLV entry in vmaster itselfTakashi Iwai
Use a private array for TLV entries of virtual master controls instead of (supposed) static array. This cleans up the existing codes. Also, now vmaster assumes the simple dB-range TLV that is the only type it can handle. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Fix missing capsrc_nids for ALC262Takashi Iwai
ALC262 must have capsrc_nids defined as well as in ALC882. Also, add a NULL check in alc882_mux_enum_put to avoid Oops. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Fix breakage of resume in auto-config of realtek codecsTakashi Iwai
The last patch for fixing the auto-config pin setting breaks the resume due to a wrong use of snd_hda_codec_amp_stereo(). The code in the init hook shouldn't touch the amp cache. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Add "IEC958 Default PCM" switchTakashi Iwai
Added a new mixer switch to enable/disable the sharing of the default PCM stream with analog and SPDIF outputs. When "IEC958 Default PCM" switch is on, the PCM stream is routed both to analog and SPDIF outputs. This is the behavior in the earlier version. Turning this switch off has a merit for some codecs, though. Some codec chips don't support 24bit formats for SPDIF but only for analog outputs. In this case, you can use 24bit format by disabling this switch. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Fix auto-configuration of Realtek codecsTakashi Iwai
This patch fixes some bugs in the auto-configurator of Realtek codecs: - add missing pin set-up for speaker pins - fix the speaker auto-mute function not to conflict with the existing "Speaker" mixer switch Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Clean up capture source selection of Realtek codecsTakashi Iwai
Clean up the codes of the capture source selection for Realtek codecs. Now using common helper functions with the new capsrc_nids field. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Fix ALC880 F1734 modelTakashi Iwai
Fixed some issues with ALC880 F1734 model - fix capture via mic - enable volume-wheel control Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - remove duplicate controls in alc268 test mixerJonathan Woithe
I've just noticed that there are a handful of duplicate controls in the ALC268 test model mixer. This patch (against alsa-driver 1.0.16) removes them. Signed-off-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-intel - Fix PCM device number assignmentTakashi Iwai
In the current scheme, PCM device numbers are assigned incrementally in the order of codecs. This causes problems when the codec number is irregular, e.g. codec #0 for HDMI and codec #1 for analog. Then the HDMI becomes the first PCM, which is picked up as the default output device. Unfortuantely this doesn't work well with normal setups. This patch introduced the fixed device numbers for the PCM types, namely, analog, SPDIF, HDMI and modem. The PCM devices are assigned according to the corresponding PCM type. After this patch, HDMI will be always assigned to PCM #3, SPDIF to PCM #1, and the first analog to PCM #0, etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-26 07:15:42 +0000