summaryrefslogtreecommitdiff
path: root/sound/pci/ice1712/ice1724.c
AgeCommit message (Collapse)Author
2010-02-09sound: use DEFINE_PCI_DEVICE_TABLEAlexey Dobriyan
Use DEFINE_PCI_DEVICE_TABLE() to make PCI device ids go to .devinit.rodata section, so they can be discarded in some cases, and make them const. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-01Merge branch 'topic/ice1724-quartet' into topic/hdaTakashi Iwai
2009-10-11ALSA: ice1724 - Make call to set hw params succeed on ESI Juli@David Henningsson
If two streams are started immediately after one another (such as a playback and a recording stream), the call to set hw params fails with EBUSY. This patch makes the call succeed, so playback and recording will work properly. Signed-off-by: David Henningsson <launchpad.web@epost.diwic.se> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-08ALSA: ice1724: increase SPDIF and independent stereo buffer sizesRobert Hancock
Increase the default and maximum PCM buffer prellocation size for ice1724's SPDIF and independent stereo pair outputs to 256K, which is the hardware's maximum supported size. This allows a reduction in interrupt rate and potentially power usage when an application is not latency-critical. Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-08ALSA: ICE1712/24 - Change the Multi Track Peak control (level meters) from ↵Pavel Hofman
MIXER to PCM type * PLEASE NOTE - this change requires the corresponding update of envy24control for ice1712 - kind of an ABI change. * The "Multi Track Peak" control is read-only level meters indicator. * The control is VERY confusing to most users since it is currently displayed in regular mixers. E.g. alsamixer ignores its read-only status and allows changing the levels with keys which makes no sense. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Acked-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-21ALSA: ice1724 - Infrasonic Quartet supportPavel Hofman
* three external clock types * all controls supported Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-21ALSA: ice1724 - Support for multiple external clock typesPavel Hofman
* Support for customization of the external clock names * Adding hooks to playback_pro_open and capture_pro_open, allowing e.g. limiting available stream rates to a single value when the external clock rate is detected Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-21ALSA: ice1724 - pro-rate-locking makes sense only for internal clock modePavel Hofman
* pro-rate-locking applies to internal clock mode only * required rate and current rate are compared for internal clock mode only Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-21ALSA: ice1724 - adding GPIO routines for mask and directionPavel Hofman
* get/set routines for GPIO mask and direction Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-10Merge branch 'topic/ice1724-pm' into for-linusTakashi Iwai
* topic/ice1724-pm: ALSA: ice1724 - Fix section mismatch ALSA: ice1724 - Patch for suspend/resume for Audiotrak Prodigy HD2
2009-07-02ALSA: ice1724 - Fix section mismatchTakashi Iwai
Now snd_vt1724_chip_reset() is used in the resume callback, thus it cannot be __devinit. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-25ALSA: ice1724 - Patch for suspend/resume for Audiotrak Prodigy HD2Igor Chernyshev
I've built a small HTPC and had to add suspend/resume support in ice1724 driver. There seem to be 3 existing bugs related to that: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4413 https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3748 https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2314 Due to hardware (un)availability, I only enabled the fix for Audiotrak Prodigy HD2 card, which is installed in my HTPC. However, most of my code should be reusable in the future on other ice1724-based cards as well (as long as people add card-specific peices of code). The fix is currently based on ALSA 1.0.20 and works on my MythBuntu 9.04 HTPC (using 2.6.28-11 kernel). Signed-off-by: Igor Chernyshev <igor.ch75+alsa at gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-25sound: Use PCI_VDEVICEJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-06ALSA: ice1724 - Add ESI Maya44 supportTakashi Iwai
Added the support for ESI Maya44 board to ice1724 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-06ALSA: ice1724 - Allow spec driver to create own routing controlsTakashi Iwai
Added a new flag, own_routing, to allow spec drivers to create own routing controls. Also, the basic get/put calls are changed to be external for later use by maya44 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-06ALSA: ice1724 - Add PCI postint to reset sequenceTakashi Iwai
Add the PCI posting to ensure the reset sequence in snd_vt1724_chip_reset(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-06ALSA: ice1724 - Clean up definitions of DMA recordsTakashi Iwai
Rename some vt1724_pcm_reg records to more generic and consistent ones. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-06ALSA: ice1724 - Check error in set_rate functionTakashi Iwai
The set_rate might return error but the current code doesn't check it. This patch adds a proper error check. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-24Merge branch 'topic/ice' into for-linusTakashi Iwai
2009-02-05ALSA: Add missing KERN_* prefix to printk in sound/pci/ice1712Takashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-02ALSA: ice1724 - Dynamic MIDI TX irq controlTakashi Iwai
MIDI_TX IRQ seems always pending when any bytes on FIFO is available. Thus, it's better to enable MPU_TX only when any bytres are really stored in the substream, and disables immediately when the queue becomes empty. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-12ALSA: Convert to snd_card_create() in sound/pci/*Takashi Iwai
Convert from snd_card_new() to the new snd_card_create() function in sound/pci/*. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-05ALSA: ice1724 - Fix a typo in IEC958 PCM nameAlan Horstmann
Fix trivial name string typo as reported in bug 2552. Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-05ALSA: ice1724 - Re-fix IRQ mask initializationTakashi Iwai
The previous IRQ mask initialization was wrong. It must set the bits to be masked. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-01ALSA: ice1724 - Fix IRQ register initializationTakashi Iwai
The IRQMASK register has to be set to zero expclitily at the initialization otherwise you'll get no interrupts properly at later operations. Also, removed the old commented out codes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-20ALSA: ice1724 - Fix TX IRQ lockupTakashi Iwai
MPU TX causes IRQ floods on VT172x devices mysteriously. Disable TX IRQ if the IRQ flood is detected. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-09-09ALSA: ice1724.c: fix coding styleAlexander Beregalov
before: total: 96 errors, 66 warnings, 2612 lines checked after: total: 11 errors, 64 warnings, 2624 lines checked Compile tested only. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-04ALSA: ice1724 - limit channels for multi-channel playbackTakashi Iwai
Limit the available channels for multi-channel playback device to the real number of channels. Until now, always up to 8 channels are created, which are simply useless without the real outputs. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: Kill snd_assert() in sound/pci/*Takashi Iwai
Kill snd_assert() in sound/pci/*, either removed or replaced with if () with snd_BUG_ON(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-20[ALSA] ice1724: fix MIDIClemens Ladisch
The VT1724 MIDI port is not MPU-401 compatible; remove the hacks that try to make the MPU-401 library work with it, and just use some simple device-specific code. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Tested-by: Pavel Hofman <pavel.hofman@insite.cz>
2008-04-29[ALSA] ice1724 - Enable watermarksTakashi Iwai
Enable watermarks settings (previously commented out) for MPU RX/TX. Otherwise irqs aren't issued properly. Tested-by: Pavel Hofman <pavel.hofman@insite.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-29[ALSA] Add MPU401_INFO_NO_ACK bitflagTakashi Iwai
Added MPU401_INFO_NO_ACK bitflag to ignore the ACK check for UART commands. VT172x doesn't handle ACK commands, for example. Tested-by: Pavel Hofman <pavel.hofman@insite.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] ice1724 - Fix IRQ lock-up with MPU accessTakashi Iwai
The sound boards with VT1724 and compatible chips may lock up when MPU401 is accessed together with the PCM streaming. This patch fixes the problem. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] Fix synchronize_irq() bugs, redundanciesJeff Garzik
free_irq() calls synchronize_irq() for you, so there is no need for drivers to manually do the same thing (again). Thus, calls where sync-irq immediately precedes free-irq can be simplified. However, during this audit several bugs were noticed, where free-irq is preceded by a "irq >= 0" check... but the sync-irq call is not covered by the same check. So, where sync-irq could not be eliminated completely, the missing check was added. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] ice1724.c: toggle "chip reset" and "eeprom based setup" sequenceKarsten Wiese
Let "chip reset" become first. Increasement of the "chip reset" related timeout leads to correctly read eeprom's contents here. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] ice1724 - Improved the Juli rate settingPavel Hofman
* moving most of clock-specific code to card-specific routines * support for ESI Juli * to-be-researched - monitoring of analog/digital inputs Signed-off-by: Pavel Hofman <dustin@seznam.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] ice1724 - Fix the SPDIF input sample-rate on Juli@Takashi Iwai
AK4114 on Juli@ has the SPDIF input sample rate detection and causes errors when an incompatible sample rate is chosen. The patch adds the open hook to check the current rate and limit the hw constraints. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-01-31[ALSA] ice1712, ice1724 - Code clean upTakashi Iwai
Clean up ice1712/ice1724 codes. The board-specific data is allocated locally in each code instead of having an ungly union in struct ice1712. Also, fix coding issues in prodigy_hifi.c. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] ICE1724: Added support for Audiotrak Prodigy 7.1 HiFi & HD2, Hercules ↵Julian Scheel
Fortissimo IV See ALSA bug#2384 for more details. Signed-off-by: Julian Scheel <julian@jusst.de> Signed-off-by: Konstantin Kletschke <konsti@ku-gbr.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] Remove sound/driver.hTakashi Iwai
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] I2C fix for ice1724Pavel Hofman
adding i2c busy wait before sending device address to prevent reading bogus data. Signed-off-by: Pavel Hofman <dustin@seznam.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] ice1724 - Add support of Onkyo SE-90PCI and SE-200PCIShin-ya Okada
Added the support for Onkyo SE-90PCI and SE-200PCI boards. Signed-off-by: Shin-ya Okada <sh_okada at d4.dion.ne.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] Changed Jaroslav Kysela's e-mail from perex@suse.cz to perex@perex.czJaroslav Kysela
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] check for linked substreams of different cardsClemens Ladisch
It is possible to have linked substreams that belong to different cards and/or different drivers. This patch changes some drivers to make sure that they do not incorrectly try to handle substreams of a different card. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] Clean up with common snd_ctl_boolean_*_info callbacksTakashi Iwai
Clean up codes using the new common snd_ctl_boolean_*_info() callbacks. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] ice1724 - Misc fixes for Prodigy192Pavel Hofman
- always set 256fs in SPDIF master clock mode - disable deemphasis filter in AK4114 for Prodigy192 Signed-off-by: Pavel Hofman <dustin@seznam.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] ice1724 - Add comments for naming of PCM streamsTakashi Iwai
Added some comments regarding naming of PCM streams on vt172x chip. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] Fix conflicts between const and __devinitdataTakashi Iwai
Marvin told with a depressed face, gcc doesn't like both __devinitdata and const in the same line. So, remove const from all over places now... Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] Add snd_pcm_group_for_each_entry() for code cleanupTakashi Iwai
Added a new macro snd_pcm_group_for_each_entry() just for code cleanup. Old macros, snd_pcm_group_for_each() and snd_pcm_group_substream_entry(), are removed. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] Add 'const' to files in pci/ice1712/Takashi Iwai
Mark a lot of data as 'const' Signed-of-by: Philipp Matthias Hahn <pmhahn@pmhahn.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>