summaryrefslogtreecommitdiff
path: root/sound/soc
AgeCommit message (Collapse)Author
2009-02-13ASoC: Only register AC97 bus if it's not done alreadyMark Brown
ASoC supports both explicit codec drivers for AC97 devices and a simple driver which uses the standard ALSA AC97 framework for codec support. When used with the generic AC97 codec support that will provide the ad hoc AC97 device for drivers like touchscreens to attach to so the core shouldn't do so. Reported-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-10ASoC: Update SDP3430 machine driver for snd_soc_cardLopez Cruz, Misael
This patch replaces "snd_soc_machine" structure by "snd_soc_card" in SP3430 driver. This change is needed in SDP3430 driver to reflect changes introduced by "ASoC: Rename snd_soc_card to snd_soc_machine" patch (875065491fba8eb13219f16c36e79a6fb4e15c68). Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-06ASoC: WM8990: Fix kcontrol's private value use in put callbackJarkko Nikula
Function wm899x_outpga_put_volsw_vu misuses the kcontrol's private value by still accessing it as bitfields even SOC_SINGLE_VALUE constructs it as a pointer into struct soc_mixer_control after the commit 4eaa9819dc08d7bfd1065ce530e31b18a119dcaf. This is very similar fix than fix to TLV320AIC3X codec made by Eero Nurkkala <ext-eero.nurkkala@nokia.com>. This fix is compile tested only. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-06ASoC: TLV320AIC3X: Fix kcontrol's private value use in put callbackEero Nurkkala
Function snd_soc_dapm_put_volsw_aic3x misuses the kcontrol's private value by still accessing it as bitfields even SOC_SINGLE_VALUE constructs it as a pointer into struct soc_mixer_control after the commit 4eaa9819dc08d7bfd1065ce530e31b18a119dcaf. This was causing arbitrary register writes when touching the controls defined with SOC_DAPM_SINGLE_AIC3X. Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-03ALSA: ASoC: email - update email addresses.Liam Girdwood
This just updates my email address on some drivers I'd forgotten in a previous patch. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-02OMAP: ASoC: Fix spinlock misuse in omap-pcm.cEero Nurkkala
omap_pcm_trigger is called also in interrupt context so CPU flags must be restored when returning. Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-29ASoC: OMAP: Initialize XCCR and RCCR registers in McBSP DAI driverMisael Lopez Cruz
This patch explicitly initializes McBSP Transmit Configuration Control Register (XCCR) and Receive Configuration Control Register (RCCR) to their reset values. Reset values are 26 ns of DX delay and Transmit DMA disabled for XCCR register; receive full cycle mode enabled and Receive DMA disabled for RCCR register. This patch requires a counterpart in OMAP McBSP driver before to apply it. The required changes in McBSP were sent and approved in linux-omap mailing list and patch is going upstream (commit 3127f8f8595a064b3f1a1837fea2177902589ac3 from linux-omap-2.6 tree). Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> [ jarkko.nikula@nokia.com: Commit id for counterpart patch corrected ] Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-29ASoC: Fix null string usage with WM8753 DAIsMark Brown
The WM8753 driver multiplexes the DAI structures it exposes to the outside world, leaving them uninitialised until the codec probes. Since the DAI name is used during the registration and setup process provide a dummy name. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-20ASoC: fix registration of the SoC card in the Freescale MPC8610 driversTimur Tabi
The Freescale MPC8610 driver was defining two SOC card (snd_soc_card) structures, partially initializing each one, but registering only one of them with ASoC. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-16ASoC: atmel_pcm: Remove non-existant headerBen Nizette
<mach/hardware.h> doesn't exist on AVR32 and therefore this driver won't build on that arch. AFAICT this driver doesn't actually use the content of that header so easiest just to remove it. Signed-off-by: Ben Nizette <bn@niasdigital.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-15ASoC: Fix the power update function for snd_soc_dapm_value_muxPeter Ujfalusi
Modify the check for the mux type to also handle the snd_soc_dapm_value_mux type in a same way as the snd_soc_dapm_mux. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-12Merge branch 'topic/asoc' into for-linusTakashi Iwai
2009-01-09ASoC: TWL4030: Module unloading fixPeter Ujfalusi
Call the snd_soc_free_pcm and snd_soc_dapm_free when the codec driver is unloaded. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-08remove lots of double-semicolonsFernando Carrijo
Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: Theodore Ts'o <tytso@mit.edu> Acked-by: Mark Fasheh <mfasheh@suse.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08ASoC: TWL4030: Change the soc_value_enum back to soc_enumPeter Ujfalusi
The soc_value_enum has been merged to soc_enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-08ASoC: Merge the soc_value_enum to soc_enum structPeter Ujfalusi
Merge the recently introduced soc_value_enum structure to the soc_enum. The value based enums are still handled separately from the normal enum types, but with the merge some of the newly introduced functions can be removed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-06ASoC: Fix SND_SOC_ALL_CODECS handling of dual SPI and I2C control busesMark Brown
For codecs that have both SPI and I2C support we need to ensure that we don't try to make the codec driver built in when I2C is modular since that won't link. Do this by creating a helper variable which uses conditional defaults to pick up the correct value for all combinations. We don't need to do anything special for I2C-only codecs since a conditional select passes on the full value for a tristate. Reported-by: Ingo Molnar <mingo@elte.hu> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-06ASoC: Use snd_soc_dapm_nc_pin() in at91sam9g20ekMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-05ASoC: TWL4030: Convert the bitfield enums to VALUE_ENUM typePeter Ujfalusi
Convert the bitfield coded enums to the new VALUE_ENUM type. Remove the enum check, since the VALUE_ENUM type can handle the bitfield coding and also handles the 'holes' in the bitfield. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-05ASoC: New enum type: value_enumPeter Ujfalusi
This patch introduces a new enum type. In this enum type each enumerated items referred with a value. This new enum type can handle enums encoded in bitfield, or any other weird ways. twl4030 codec has several mux selection register, where the input/output mux is coded in a bitfield. With the normal enum type this type of mux can not be handled in a clean way. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-05ASoC: Clocking fixes for davinci-evm.cDavid Brownell
Let's have audio playback not sound like chipmunks, 'k? :) ASP1 on the DM355 EVM uses a 27 MHz external audio clock, not the slower clock used with ASP0 on the DM6446 EVM. Also, that slower ASP0 clock on the DM6446 is 12.288 MHz, not 22.5792 MHz ... 48 KHz sample rate (x256), not a double speed 44.1 KHz sample rate (which could be done, but isn't what the board init code now sets up). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-05ASoC: Mark non-connected TWL4030 pins for pandoraGrazvydas Ignotas
Pandora has all TWL4030 output pins floating, it uses external DAC for playback. Mark those outputs as not connected using DAPM calls. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-05ASoC: OMAP: Select OMAP pin multiplexing when using Nokia N810 ASoC driversJarkko Nikula
N810 bootloader muxes I2S pins for OMAP2420 EAC block while N810 ASoC drivers are using McBSP block so the kernel have to change configuration runtime. Author has not seen problems using kernel pin multiplexing on N810 but very many times unworking audio after forgotten to enable it and spending 15 minutes each time to figure it out again... This change makes it easier for other users as well. If problems arise, then they are better to find and fix in OMAP pin multiplexing framework. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-05Merge branch 'fixes' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into topic/asoc
2009-01-05ASoC: fix davinci-sffsdr bugletDavid Brownell
Minor bugfix: now that DaVinci kernels can support multiple boards, board-specific ASoC components need to verify they're running on the right board before initializing. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-01ASoC: Clean up kerneldoc warningsMark Brown
Almost all parameters that have been misnamed in the comments. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-01ASoC: Fix pxa2xx-pcm checks for invalid DMA channelsStephen Ware
Set the invalid dma channel to -1 (and check properly for it) in pxa2xx_pcm_hw_free(). Was assuming 0 is an invalid channel number but 0 is a valid pxa dma channel num. Signed-off-by: stephen <stephen.ware@eqware.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-31ASoC: TWL4030: DAPM based capture implementationPeter Ujfalusi
This patch adds DAPM implementaion for the capture path on twlx030. TWL has two physical ADC and two digital microphone (stereo) connections. The CPU interface has four microphone channels. For simplicity the microphone channel paths are named as: TX1 (Left/Right) - when using i2s mode, only the TX1 data is valid TX2 (Left/Right) Input routing (simplified version): There is two levels of mux settings for TWL in input path: Analog input mux: ADCL <- {Off, Main mic, Headset mic, AUXL, Carkit mic} ADCR <- {Off, Sub mic, AUXR} Analog/Digital mux: TX1 Analog mode: TX1L <- ADCL TX1R <- ADCR TX1 Digital mode: TX1L <- Digimic0 (Left) TX1R <- Digimic0 (Right) TX2 Analog mode: TX2L <- ADCL TX2R <- ADCR TX2 Digital mode: TX2L <- Digimic1 (Left) TX2R <- Digimic1 (Right) The patch provides the following user controls for the capture path: Mux settings: "TX1 Capture Route": {Analog, Digimic0} "TX2 Capture Route": {Analog, Digimic1} "Analog Left Capture Route": {Off, Main Mic, Headset Mic, AUXL, Carkit Mic} "Analog Right Capture Route": {Off, Sub Mic, AUXR} Volume/Gain controls: "TX1 Digital Capture Volume": Stereo gain control for TX1 path "TX2 Digital Capture Volume": Stereo gain control for TX2 path "Analog Capture Volume": Stereo gain control for the analog path only Important things for the board files: Microphone bias: "Mic Bias 1": Bias for Main mic or for digimic0 (analog or digital path) "Mic Bias 2": Bias for Sub mic or for digimic1 (analog or digital path) "Headset Mic Bias": Bias for Headset mic When the routing configured correctly only the needed components will be powered/enabled. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-31ASoC: TWL4030: Make the enum filter generic for twl4030Peter Ujfalusi
Modify the enum filter to more generic that it will filter out the enums with text "Invalid". The enum filter also required for the capture path. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-30Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits) [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices [ARM] pxafb: cleanup of the timing checking code [ARM] pxafb: cleanup of the color format manipulation code [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3 [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset [ARM] pxafb: allow video memory size to be configurable [ARM] pxa: add document on the MFP design and how to use it [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad) [ARM] pxa: Update eseries defconfig [ARM] 5352/1: add w90p910-plat config file [ARM] s3c: S3C options should depend on PLAT_S3C [ARM] mv78xx0: implement GPIO and GPIO interrupt support [ARM] Kirkwood: implement GPIO and GPIO interrupt support [ARM] Orion: share GPIO IRQ handling code [ARM] Orion: share GPIO handling code [ARM] s3c: define __io using the typesafe version [ARM] S3C64XX: Ensure CPU_V6 is selected ...
2008-12-22ALSA: ASoC: fix a typo in omp-pcm.cRoel Kluin
Fix a typo (& and &&) Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-22ASoC: Fix DSP formats in SSM2602 audio codecJarkko Nikula
Thanks to Troy Kisky <troy.kisky@boundarydevices.com> for noticing. - DSP_A format has 1-bit data delay which corresponds to SSM6202 submode 2 - DSP_B has 0-bit data delay which corresponds to submode 1 - Currently driver sets them opposite so swap the submode setting Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Cc: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-22ASoC: Fix incorrect DSP format in OMAP McBSP DAI and affected driversJarkko Nikula
- OMAP McBSP DAI driver claims to support DSP_A format which has 1-bit data delay but configures link for 0-bit data delay which is in fact DSP_B - Fix this by changing format from DSP_A to DSP_B - Fix also TLV320AIC23 codec and OSK5912 machine drivers since the same error is populated also there Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Acked-by: Arun KS <arunks@mistralsolutions.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-20ALSA: ASoC - Add missing __devexit annotation to wm8350.cTakashi Iwai
Added the missing __devexit annotation to wm8350_codec_remove(): sound/soc/codecs/wm8350.c:1546: warning: 'wm8350_codec_remove' defined but not used Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-20ALSA: ASoc: DaVinci: davinci-evm use dsp_b modeTroy Kisky
Sense DaVinci does not support true I2S mode and we don't have to use the hack, use dsp_b mode instead Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-20ALSA: ASoC: DaVinci: i2s, evm, pass same value to codec and cpu_daiTroy Kisky
Fix the meaning of SND_SOC_DAIFMT_NB_NF to match that used in the codec. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-20ALSA: ASoC: tlv320aic3x add dsp_aTroy Kisky
Add SND_SOC_DAIFMT_DSP_A mode option. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-20ALSA: ASoC: DaVinci: document I2S limitationsTroy Kisky
DaVinci does not support true I2S or right justified mode so not all I2S codecs will work with it when the codec is master. Document this limitation. Add dsp_a, dsp_b mode options Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-20ALSA: ASoC: DaVinci: davinci-i2s clean upTroy Kisky
Minor, just move a block of code to make next patch clearer. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-20ALSA: ASoC: DaVinci: davinci-i2s clean upTroy Kisky
Just at little cleanup of davinci_i2s_set_dai_fmt Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-20ALSA: ASoC: DaVinci: davinci-i2s add comments to explain polarityTroy Kisky
Document the current polarity choices. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-20ALSA: ASoC: DaVinci: davinvi-evm, make requests explicitTroy Kisky
Add constants with a value of 0 to show more explicitly what is being requested. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-19Merge branch 'fix/asoc' into topic/asocTakashi Iwai
2008-12-19ALSA: Fix a Oops bug in omap soc driver.Stanley Miao
There will be a Oops or frequent underrun messages when playing music with omap soc driver, this is because a data region is incorretly sized, other data region will be overwriten when writing to this data region. Signed-off-by: Stanley Miao <stanley.miao@windriver.com> Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-18ASoC: Add WM8350 AudioPlus codec driverMark Brown
The WM8350 is an integrated audio and power management subsystem which provides a single-chip solution for portable audio and multimedia systems. The integrated audio CODEC provides all the necessary functions for high-quality stereo recording and playback. Programmable on-chip amplifiers allow for the direct connection of headphones and microphones with a minimum of external components. A programmable low-noise bias voltage is available to feed one or more electret microphones. Additional audio features include programmable high-pass filter in the ADC input path. This driver was originally written by Liam Girdwood with further updates from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-18ASoC: Complain if we fail to create DAPM controlsMark Brown
This should never happen and it's helpful to identify the specific control that failed when it does happen. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-18ASoC: Ease merge difficulties from new architecturesMark Brown
Rather than listing lots of architectures per line in Kconfig and Makefile, causing merge conflicts all the time, have one per line in alphabetical order. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-14ASoC: switch davinci DPRINTK to pr_debug()Alexander Beregalov
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-13Merge git://git.marvell.com/orion into develRussell King
2008-12-11ASoC: TWL4030: hands-free start-up sequence.Stanley.Miao
A special start-up sequence is required to reduce the pop-noise of Class D amplifier when enable hands-free on TWL4030. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-12 15:35:39 +0000