summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2019-08-14selftests/bpf: fix "bind{4, 6} deny specific IP & port" on s390Ilya Leoshkevich
"bind4 allow specific IP & port" and "bind6 deny specific IP & port" fail on s390 because of endianness issue: the 4 IP address bytes are loaded as a word and compared with a constant, but the value of this constant should be different on big- and little- endian machines, which is not the case right now. Use __bpf_constant_ntohl to generate proper value based on machine endianness. Fixes: 1d436885b23b ("selftests/bpf: Selftest for sys_bind post-hooks.") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2019-08-11 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) x64 JIT code generation fix for backward-jumps to 1st insn, from Alexei. 2) Fix buggy multi-closing of BTF file descriptor in libbpf, from Andrii. 3) Fix libbpf_num_possible_cpus() to make it thread safe, from Takshak. 4) Fix bpftool to dump an error if pinning fails, from Jakub. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-10Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling fixes from Thomas Gleixner: "Perf tooling fixes all over the place: - Fix the selection of the main thread COMM in db-export - Fix the disassemmbly display for BPF in annotate - Fix cpumap mask setup in perf ftrace when only one CPU is present - Add the missing 'cpu_clk_unhalted.core' event - Fix CPU 0 bindings in NUMA benchmarks - Fix the module size calculations for s390 - Handle the gap between kernel end and module start on s390 correctly - Build and typo fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf pmu-events: Fix missing "cpu_clk_unhalted.core" event perf annotate: Fix s390 gap between kernel end and module start perf record: Fix module size on s390 perf tools: Fix include paths in ui directory perf tools: Fix a typo in a variable name in the Documentation Makefile perf cpumap: Fix writing to illegal memory in handling cpumap mask perf ftrace: Fix failure to set cpumask when only one cpu is present perf db-export: Fix thread__exec_comm() perf annotate: Fix printing of unaugmented disassembled instructions from BPF perf bench numa: Fix cpu0 binding
2019-08-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "Bugfixes (arm and x86) and cleanups" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: selftests: kvm: Adding config fragments KVM: selftests: Update gitignore file for latest changes kvm: remove unnecessary PageReserved check KVM: arm/arm64: vgic: Reevaluate level sensitive interrupts on enable KVM: arm: Don't write junk to CP15 registers on reset KVM: arm64: Don't write junk to sysregs on reset KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to block x86: kvm: remove useless calls to kvm_para_available KVM: no need to check return value of debugfs_create functions KVM: remove kvm_arch_has_vcpu_debugfs() KVM: Fix leak vCPU's VMCS value into other pCPU KVM: Check preempted_in_kernel for involuntary preemption KVM: LAPIC: Don't need to wakeup vCPU twice afer timer fire arm64: KVM: hyp: debug-sr: Mark expected switch fall-through KVM: arm64: Update kvm_arm_exception_class and esr_class_str for new EC KVM: arm: vgic-v3: Mark expected switch fall-through arm64: KVM: regmap: Fix unexpected switch fall-through KVM: arm/arm64: Introduce kvm_pmu_vcpu_init() to setup PMU counter index
2019-08-09bpf: sync bpf.h to tools infrastructureDaniel Borkmann
Pull in updates in BPF helper function description. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09tools: bpftool: add error message on pin failureJakub Kicinski
No error message is currently printed if the pin syscall itself fails. It got lost in the loadall refactoring. Fixes: 77380998d91d ("bpftool: add loadall command") Reported-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-09tools: bpftool: fix error message (prog -> object)Jakub Kicinski
Change an error message to work for any object being pinned not just programs. Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-09Merge tag 'kvmarm-fixes-for-5.3' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.3 - A bunch of switch/case fall-through annotation, fixing one actual bug - Fix PMU reset bug - Add missing exception class debug strings
2019-08-09selftests: kvm: Adding config fragmentsNaresh Kamboju
selftests kvm test cases need pre-required kernel configs for the test to get pass. Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-09KVM: selftests: Update gitignore file for latest changesThomas Huth
The kvm_create_max_vcpus test has been moved to the main directory, and sync_regs_test is now available on s390x, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-08tc-testing: updated skbedit action tests with batch create/deleteRoman Mashak
Update TDC tests with cases varifying ability of TC to install or delete batches of skbedit actions. Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08perf pmu-events: Fix missing "cpu_clk_unhalted.core" eventJin Yao
The events defined in pmu-events JSON are parsed and added into perf tool. For fixed counters, we handle the encodings between JSON and perf by using a static array fixed[]. But the fixed[] has missed an important event "cpu_clk_unhalted.core". For example, on the Tremont platform, [root@localhost ~]# perf stat -e cpu_clk_unhalted.core -a event syntax error: 'cpu_clk_unhalted.core' \___ parser error With this patch, the event cpu_clk_unhalted.core can be parsed. [root@localhost perf]# ./perf stat -e cpu_clk_unhalted.core -a -vvv ------------------------------------------------------------ perf_event_attr: type 4 size 112 config 0x3c sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 exclude_guest 1 ------------------------------------------------------------ ... Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190729072755.2166-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-08perf annotate: Fix s390 gap between kernel end and module startThomas Richter
During execution of command 'perf top' the error message: Not enough memory for annotating '__irf_end' symbol!) is emitted from this call sequence: __cmd_top perf_top__mmap_read perf_top__mmap_read_idx perf_event__process_sample hist_entry_iter__add hist_iter__top_callback perf_top__record_precise_ip hist_entry__inc_addr_samples symbol__inc_addr_samples symbol__get_annotation symbol__alloc_hist In this function the size of symbol __irf_end is calculated. The size of a symbol is the difference between its start and end address. When the symbol was read the first time, its start and end was set to: symbol__new: __irf_end 0xe954d0-0xe954d0 which is correct and maps with /proc/kallsyms: root@s8360046:~/linux-4.15.0/tools/perf# fgrep _irf_end /proc/kallsyms 0000000000e954d0 t __irf_end root@s8360046:~/linux-4.15.0/tools/perf# In function symbol__alloc_hist() the end of symbol __irf_end is symbol__alloc_hist sym:__irf_end start:0xe954d0 end:0x3ff80045a8 which is identical with the first module entry in /proc/kallsyms This results in a symbol size of __irf_req for histogram analyses of 70334140059072 bytes and a malloc() for this requested size fails. The root cause of this is function __dso__load_kallsyms() +-> symbols__fixup_end() Function symbols__fixup_end() enlarges the last symbol in the kallsyms map: # fgrep __irf_end /proc/kallsyms 0000000000e954d0 t __irf_end # to the start address of the first module: # cat /proc/kallsyms | sort | egrep ' [tT] ' .... 0000000000e952d0 T __security_initcall_end 0000000000e954d0 T __initramfs_size 0000000000e954d0 t __irf_end 000003ff800045a8 T fc_get_event_number [scsi_transport_fc] 000003ff800045d0 t store_fc_vport_disable [scsi_transport_fc] 000003ff800046a8 T scsi_is_fc_rport [scsi_transport_fc] 000003ff800046d0 t fc_target_setup [scsi_transport_fc] On s390 the kernel is located around memory address 0x200, 0x10000 or 0x100000, depending on linux version. Modules however start some- where around 0x3ff xxxx xxxx. This is different than x86 and produces a large gap for which histogram allocation fails. Fix this by detecting the kernel's last symbol and do no adjustment for it. Introduce a weak function and handle s390 specifics. Reported-by: Klaus Theurich <klaus.theurich@de.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20190724122703.3996-2-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-08perf record: Fix module size on s390Thomas Richter
On s390 the modules loaded in memory have the text segment located after the GOT and Relocation table. This can be seen with this output: [root@m35lp76 perf]# fgrep qeth /proc/modules qeth 151552 1 qeth_l2, Live 0x000003ff800b2000 ... [root@m35lp76 perf]# cat /sys/module/qeth/sections/.text 0x000003ff800b3990 [root@m35lp76 perf]# There is an offset of 0x1990 bytes. The size of the qeth module is 151552 bytes (0x25000 in hex). The location of the GOT/relocation table at the beginning of a module is unique to s390. commit 203d8a4aa6ed ("perf s390: Fix 'start' address of module's map") adjusts the start address of a module in the map structures, but does not adjust the size of the modules. This leads to overlapping of module maps as this example shows: [root@m35lp76 perf] # ./perf report -D 0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x25000) @ 0]: x /lib/modules/.../qeth.ko.xz 0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x8000) @ 0]: x /lib/modules/.../ip6_tables.ko.xz The module qeth.ko has an adjusted start address modified to b3990, but its size is unchanged and the module ends at 0x3ff800d8990. This end address overlaps with the next modules start address of 0x3ff800d85a0. When the size of the leading GOT/Relocation table stored in the beginning of the text segment (0x1990 bytes) is subtracted from module qeth end address, there are no overlaps anymore: 0x3ff800d8990 - 0x1990 = 0x0x3ff800d7000 which is the same as 0x3ff800b2000 + 0x25000 = 0x0x3ff800d7000. To fix this issue, also adjust the modules size in function arch__fix_module_text_start(). Add another function parameter named size and reduce the size of the module when the text segment start address is changed. Output after: 0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x23670) @ 0]: x /lib/modules/.../qeth.ko.xz 0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x7a60) @ 0]: x /lib/modules/.../ip6_tables.ko.xz Reported-by: Stefan Liebler <stli@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: stable@vger.kernel.org Fixes: 203d8a4aa6ed ("perf s390: Fix 'start' address of module's map") Link: http://lkml.kernel.org/r/20190724122703.3996-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-08perf tools: Fix include paths in ui directoryIan Rogers
These paths point to the wrong location but still work because they get picked up by a -I flag that happens to direct to the correct file. Fix paths to point to the correct location without -I flags. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20190731225441.233800-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-08perf tools: Fix a typo in a variable name in the Documentation MakefileMasanari Iida
This patch fix a spelling typo in a variable name in the Documentation Makefile. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190801032812.25018-1-standby24x7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-08perf cpumap: Fix writing to illegal memory in handling cpumap maskHe Zhe
cpu_map__snprint_mask() would write to illegal memory pointed by zalloc(0) when there is only one cpu. This patch fixes the calculation and adds sanity check against the input parameters. Signed-off-by: He Zhe <zhe.he@windriver.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Fixes: 4400ac8a9a90 ("perf cpumap: Introduce cpu_map__snprint_mask()") Link: http://lkml.kernel.org/r/1564734592-15624-2-git-send-email-zhe.he@windriver.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-08perf ftrace: Fix failure to set cpumask when only one cpu is presentHe Zhe
The buffer containing the string used to set cpumask is overwritten at the end of the string later in cpu_map__snprint_mask due to not enough memory space, when there is only one cpu. And thus causes the following failure: $ perf ftrace ls failed to reset ftrace $ This patch fixes the calculation of the cpumask string size. Signed-off-by: He Zhe <zhe.he@windriver.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Fixes: dc23103278c5 ("perf ftrace: Add support for -a and -C option") Link: http://lkml.kernel.org/r/1564734592-15624-1-git-send-email-zhe.he@windriver.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-08perf db-export: Fix thread__exec_comm()Adrian Hunter
Threads synthesized from /proc have comms with a start time of zero, and not marked as "exec". Currently, there can be 2 such comms. The first is created by processing a synthesized fork event and is set to the parent's comm string, and the second by processing a synthesized comm event set to the thread's current comm string. In the absence of an "exec" comm, thread__exec_comm() picks the last (oldest) comm, which, in the case above, is the parent's comm string. For a main thread, that is very probably wrong. Use the second-to-last in that case. This affects only db-export because it is the only user of thread__exec_comm(). Example: $ sudo perf record -a -o pt-a-sleep-1 -e intel_pt//u -- sleep 1 $ sudo chown ahunter pt-a-sleep-1 Before: $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1.db branches calls $ sqlite3 -header -column pt-a-sleep-1.db 'select * from comm_threads_view' comm_id command thread_id pid tid ---------- ---------- ---------- ---------- ---------- 1 swapper 1 0 0 2 rcu_sched 2 10 10 3 kthreadd 3 78 78 5 sudo 4 15180 15180 5 sudo 5 15180 15182 7 kworker/4: 6 10335 10335 8 kthreadd 7 55 55 10 systemd 8 865 865 10 systemd 9 865 875 13 perf 10 15181 15181 15 sleep 10 15181 15181 16 kworker/3: 11 14179 14179 17 kthreadd 12 29376 29376 19 systemd 13 746 746 21 systemd 14 401 401 23 systemd 15 879 879 23 systemd 16 879 945 25 kthreadd 17 556 556 27 kworker/u1 18 14136 14136 28 kworker/u1 19 15021 15021 29 kthreadd 20 509 509 31 systemd 21 836 836 31 systemd 22 836 967 33 systemd 23 1148 1148 33 systemd 24 1148 1163 35 kworker/2: 25 17988 17988 36 kworker/0: 26 13478 13478 After: $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1b.db branches calls $ sqlite3 -header -column pt-a-sleep-1b.db 'select * from comm_threads_view' comm_id command thread_id pid tid ---------- ---------- ---------- ---------- ---------- 1 swapper 1 0 0 2 rcu_sched 2 10 10 3 kswapd0 3 78 78 4 perf 4 15180 15180 4 perf 5 15180 15182 6 kworker/4: 6 10335 10335 7 kcompactd0 7 55 55 8 accounts-d 8 865 865 8 accounts-d 9 865 875 10 perf 10 15181 15181 12 sleep 10 15181 15181 13 kworker/3: 11 14179 14179 14 kworker/1: 12 29376 29376 15 haveged 13 746 746 16 systemd-jo 14 401 401 17 NetworkMan 15 879 879 17 NetworkMan 16 879 945 19 irq/131-iw 17 556 556 20 kworker/u1 18 14136 14136 21 kworker/u1 19 15021 15021 22 kworker/u1 20 509 509 23 thermald 21 836 836 23 thermald 22 836 967 25 unity-sett 23 1148 1148 25 unity-sett 24 1148 1163 27 kworker/2: 25 17988 17988 28 kworker/0: 26 13478 13478 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Fixes: 65de51f93ebf ("perf tools: Identify which comms are from exec") Link: http://lkml.kernel.org/r/20190808064823.14846-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-08perf annotate: Fix printing of unaugmented disassembled instructions from BPFArnaldo Carvalho de Melo
The code to disassemble BPF programs uses binutil's disassembling routines, and those use in turn fprintf to print to a memstream FILE, adding a newline at the end of each line, which ends up confusing the TUI routines called from: annotate_browser__write() annotate_line__write() annotate_browser__printf() ui_browser__vprintf() SLsmg_vprintf() The SLsmg_vprintf() function in the slang library gets confused with the terminating newline, so make the disasm_line__parse() function that parses the lines produced by the BPF specific disassembler (that uses binutil's libopcodes) and the lines produced by the objdump based disassembler used for everything else (and that doesn't adds this terminating newline) trim the end of the line in addition of the beginning. This way when disasm_line->ops.raw, i.e. for instructions without a special scnprintf() method, we'll not have that \n getting in the way of filling the screen right after the instruction with spaces to avoid leaving what was on the screen before and thus garbling the annotation screen, breaking scrolling, etc. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Fixes: 6987561c9e86 ("perf annotate: Enable annotation of BPF programs") Link: https://lkml.kernel.org/n/tip-unbr5a5efakobfr6rhxq99ta@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: "Yeah I should have sent a pull request last week, so there is a lot more here than usual: 1) Fix memory leak in ebtables compat code, from Wenwen Wang. 2) Several kTLS bug fixes from Jakub Kicinski (circular close on disconnect etc.) 3) Force slave speed check on link state recovery in bonding 802.3ad mode, from Thomas Falcon. 4) Clear RX descriptor bits before assigning buffers to them in stmmac, from Jose Abreu. 5) Several missing of_node_put() calls, mostly wrt. for_each_*() OF loops, from Nishka Dasgupta. 6) Double kfree_skb() in peak_usb can driver, from Stephane Grosjean. 7) Need to hold sock across skb->destructor invocation, from Cong Wang. 8) IP header length needs to be validated in ipip tunnel xmit, from Haishuang Yan. 9) Use after free in ip6 tunnel driver, also from Haishuang Yan. 10) Do not use MSI interrupts on r8169 chips before RTL8168d, from Heiner Kallweit. 11) Upon bridge device init failure, we need to delete the local fdb. From Nikolay Aleksandrov. 12) Handle erros from of_get_mac_address() properly in stmmac, from Martin Blumenstingl. 13) Handle concurrent rename vs. dump in netfilter ipset, from Jozsef Kadlecsik. 14) Setting NETIF_F_LLTX on mac80211 causes complete breakage with some devices, so revert. From Johannes Berg. 15) Fix deadlock in rxrpc, from David Howells. 16) Fix Kconfig deps of enetc driver, we must have PHYLIB. From Yue Haibing. 17) Fix mvpp2 crash on module removal, from Matteo Croce. 18) Fix race in genphy_update_link, from Heiner Kallweit. 19) bpf_xdp_adjust_head() stopped working with generic XDP when we fixes generic XDP to support stacked devices properly, fix from Jesper Dangaard Brouer. 20) Unbalanced RCU locking in rt6_update_exception_stamp_rt(), from David Ahern. 21) Several memory leaks in new sja1105 driver, from Vladimir Oltean" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (214 commits) net: dsa: sja1105: Fix memory leak on meta state machine error path net: dsa: sja1105: Fix memory leak on meta state machine normal path net: dsa: sja1105: Really fix panic on unregistering PTP clock net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well net: dsa: sja1105: Fix broken learning with vlan_filtering disabled net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus() net: sched: sample: allow accessing psample_group with rtnl net: sched: police: allow accessing police->params with rtnl net: hisilicon: Fix dma_map_single failed on arm64 net: hisilicon: fix hip04-xmit never return TX_BUSY net: hisilicon: make hip04_tx_reclaim non-reentrant tc-testing: updated vlan action tests with batch create/delete net sched: update vlan action for batched events operations net: stmmac: tc: Do not return a fragment entry net: stmmac: Fix issues when number of Queues >= 4 net: stmmac: xgmac: Fix XGMAC selftests be2net: disable bh with spin_lock in be_process_mcc net: cxgb3_main: Fix a resource leak in a error path in 'init_one()' net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER ...
2019-08-06tc-testing: updated vlan action tests with batch create/deleteRoman Mashak
Update TDC tests with cases varifying ability of TC to install or delete batches of vlan actions. Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-05selftests/tls: add a litmus test for the socket reuse through shutdownJakub Kicinski
Make sure that shutdown never works, and at the same time document how I tested to came to the conclusion that currently reuse is not possible. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-05Merge tag 'linux-kselftest-5.3-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "A fix to the Kselftest framework to save and restore errno and a fix to livepatch to push and pop dynamic debug config" * tag 'linux-kselftest-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/livepatch: push and pop dynamic debug config kselftest: save-and-restore errno to allow for %m formatting
2019-08-05selftests/bpf: reduce time to execute test_xdp_vlan.shJesper Dangaard Brouer
Given the increasing number of BPF selftests, it makes sense to reduce the time to execute these tests. The ping parameters are adjusted to reduce the time from measures 9 sec to approx 2.8 sec. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-05selftests/bpf: add wrapper scripts for test_xdp_vlan.shJesper Dangaard Brouer
In-order to test both native-XDP (xdpdrv) and generic-XDP (xdpgeneric) create two wrapper test scripts, that start the test_xdp_vlan.sh script with these modes. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-05bpf: fix XDP vlan selftests test_xdp_vlan.shJesper Dangaard Brouer
Change BPF selftest test_xdp_vlan.sh to (default) use generic XDP. This selftest was created together with a fix for generic XDP, in commit 297249569932 ("net: fix generic XDP to handle if eth header was mangled"). And was suppose to catch if generic XDP was broken again. The tests are using veth and assumed that veth driver didn't support native driver XDP, thus it used the (ip link set) 'xdp' attach that fell back to generic-XDP. But veth gained native-XDP support in 948d4f214fde ("veth: Add driver XDP"), which caused this test script to use native-XDP. Fixes: 948d4f214fde ("veth: Add driver XDP") Fixes: 97396ff0bc2d ("selftests/bpf: add XDP selftests for modifying and popping VLAN headers") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-05selftests: netfilter: extend flowtable test script for ipsecFlorian Westphal
'flow offload' expression should not offload flows that will be subject to ipsec, but it does. This results in a connectivity blackhole for the affected flows -- first packets will go through (offload happens after established state is reached), but all remaining ones bypass ipsec encryption and are thus discarded by the peer. This can be worked around by adding "rt ipsec exists accept" before the 'flow offload' rule matches. This test case will fail, support for such flows is added in next patch. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-08-03Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling fixes from Thomas Gleixner: "A set of updates for perf tools and documentation: perf header: - Prevent a division by zero - Deal with an uninitialized warning proper libbpf: - Fix the missiong __WORDSIZE definition for musl & al UAPI headers: - Synchronize kernel headers Documentation: - Fix the memory units for perf.data size" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: libbpf: fix missing __WORDSIZE definition perf tools: Fix perf.data documentation units for memory size perf header: Fix use of unitialized value warning perf header: Fix divide by zero error if f_header.attr_size==0 tools headers UAPI: Sync if_link.h with the kernel tools headers UAPI: Sync sched.h with the kernel tools headers UAPI: Sync usbdevice_fs.h with the kernels to get new ioctl tools perf beauty: Fix usbdevfs_ioctl table generator to handle _IOC() tools headers UAPI: Update tools's copy of drm.h headers tools headers UAPI: Update tools's copy of mman.h headers tools headers UAPI: Update tools's copy of kvm.h headers tools include UAPI: Sync x86's syscalls_64.tbl and generic unistd.h to pick up clone3 and pidfd_open
2019-08-03cgroup: kselftest: relax fs_spec checksChris Down
On my laptop most memcg kselftests were being skipped because it claimed cgroup v2 hierarchy wasn't mounted, but this isn't correct. Instead, it seems current systemd HEAD mounts it with the name "cgroup2" instead of "cgroup": % grep cgroup /proc/mounts cgroup2 /sys/fs/cgroup cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate 0 0 I can't think of a reason to need to check fs_spec explicitly since it's arbitrary, so we can just rely on fs_vfstype. After these changes, `make TARGETS=cgroup kselftest` actually runs the cgroup v2 tests in more cases. Link: http://lkml.kernel.org/r/20190723210737.GA487@chrisdown.name Signed-off-by: Chris Down <chris@chrisdown.name> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-01selftests/bpf: tests for jmp to 1st insnAlexei Starovoitov
Add 2 tests that check JIT code generation to jumps to 1st insn. 1st test is similar to syzbot reproducer. The backwards branch is never taken at runtime. 2nd test has branch to 1st insn that executes. The test is written as two bpf functions, since it's not possible to construct valid single bpf program that jumps to 1st insn. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com>
2019-08-01libbpf: set BTF FD for prog only when there is supported .BTF.ext dataAndrii Nakryiko
5d01ab7bac46 ("libbpf: fix erroneous multi-closing of BTF FD") introduced backwards-compatibility issue, manifesting itself as -E2BIG error returned on program load due to unknown non-zero btf_fd attribute value for BPF_PROG_LOAD sys_bpf() sub-command. This patch fixes bug by ensuring that we only ever associate BTF FD with program if there is a BTF.ext data that was successfully loaded into kernel, which automatically means kernel supports func_info/line_info and associated BTF FD for progs (checked and ensured also by BTF sanitization code). Fixes: 5d01ab7bac46 ("libbpf: fix erroneous multi-closing of BTF FD") Reported-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-01perf bench numa: Fix cpu0 bindingJiri Olsa
Michael reported an issue with perf bench numa failing with binding to cpu0 with '-0' option. # perf bench numa mem -p 3 -t 1 -P 512 -s 100 -zZcm0 --thp 1 -M 1 -ddd # Running 'numa/mem' benchmark: # Running main, "perf bench numa numa-mem -p 3 -t 1 -P 512 -s 100 -zZcm0 --thp 1 -M 1 -ddd" binding to node 0, mask: 0000000000000001 => -1 perf: bench/numa.c:356: bind_to_memnode: Assertion `!(ret)' failed. Aborted (core dumped) This happens when the cpu0 is not part of node0, which is the benchmark assumption and we can see that's not the case for some powerpc servers. Using correct node for cpu0 binding. Reported-by: Michael Petlan <mpetlan@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20190801142642.28004-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-31libbpf : make libbpf_num_possible_cpus function thread safeTakshak Chahande
Having static variable `cpus` in libbpf_num_possible_cpus function without guarding it with mutex makes this function thread-unsafe. If multiple threads accessing this function, in the current form; it leads to incrementing the static variable value `cpus` in the multiple of total available CPUs. Used local stack variable to calculate the number of possible CPUs and then updated the static variable using WRITE_ONCE(). Changes since v1: * added stack variable to calculate cpus * serialized static variable update using WRITE_ONCE() * fixed Fixes tag Fixes: 6446b3155521 ("bpf: add a new API libbpf_num_possible_cpus()") Signed-off-by: Takshak Chahande <ctakshak@fb.com> Acked-by: Andrey Ignatov <rdna@fb.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-31selftests/tls: fix TLS tests with CONFIG_TLS=nJakub Kicinski
Build bot reports some recent TLS tests are failing with CONFIG_TLS=n. Correct the expected return code and skip TLS installation if not supported. Tested with CONFIG_TLS=n and CONFIG_TLS=m. Reported-by: kernel test robot <rong.a.chen@intel.com> Fixes: cf32526c8842 ("selftests/tls: add a test for ULP but no keys") Fixes: 65d41fb317c6 ("selftests/tls: add a bidirectional test") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30selftests/livepatch: push and pop dynamic debug configJoe Lawrence
The livepatching self-tests tweak the dynamic debug config to verify the kernel log during the tests. Enhance set_dynamic_debug() so that the config changes are restored when the script exits. Note this functionality needs to keep in sync with: - dynamic_debug input/output formatting - functions affected by set_dynamic_debug() For example, push_dynamic_debug() transforms: kernel/livepatch/transition.c:530 [livepatch]klp_init_transition =_ "'%s': initializing %s transition\012" to the following: file kernel/livepatch/transition.c line 530 =_ Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Tested-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-07-30kselftest: save-and-restore errno to allow for %m formattingAleksa Sarai
Previously, using "%m" in a ksft_* format string can result in strange output because the errno value wasn't saved before calling other libc functions. The solution is to simply save and restore the errno before we format the user-supplied format string. Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-07-30Merge tag 'for-linus-20190730' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd fixes from Christian Brauner: "This makes setting the exit_state in exit_notify() consistent after fixing the pidfd polling race pre-rc1. Related to the race fix, this adds a WARN_ON() to do_notify_pidfd() to catch any future exit_state races. Last, this removes an obsolete comment from the pidfd tests" * tag 'for-linus-20190730' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: exit: make setting exit_state consistent pidfd: Add warning if exit_state is 0 during notification pidfd: remove obsolete comments from test
2019-07-30Merge tag 'linux-kselftest-5.3-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "Minor fixes to tests and one major fix to livepatch test to add skip handling to avoid false fail reports when livepatch is disabled" * tag 'linux-kselftest-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/livepatch: add test skip handling selftests: mlxsw: Fix typo in qos_mc_aware.sh selftests/x86: fix spelling mistake "FAILT" -> "FAIL" selftests: kmod: Fix typo in kmod.sh
2019-07-29Merge tag 'perf-urgent-for-mingo-5.3-20190729' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: perf header: Vince Weaver: - Fix divide by zero error if f_header.attr_size==0, found using a perf tool fuzzer. Numfor Mbiziwo-Tiapo: - Silence use of uninitialized value warning pointed out by clang's MSAN tool. libbpf: Andrii Nakryiko: - Fix missing __WORDSIZE definition in some systems, such as musl libc (Alpine Linux). tools header UAPI: Arnaldo Carvalho de Melo: - Sync headers to address perf build warnings: - syscalls_64.tbl and generic unistd.h to pick up clone3 and pidfd_open. - With new ioctls: kvm.h, drm.h and usbdevice_fs.h. - No tooling change: mman.h, sched.h and if_link.h. Documentation: Vince Weaver: - Fix perf.data documentation units for memory size, its kB, not bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-29pidfd: remove obsolete comments from testChristian Brauner
Since the introduction of CLONE_PIDFD pidfd_send_signal() is independent of CONFIG_PROC_FS. Signed-off-by: Christian Brauner <christian@brauner.io>
2019-07-29libbpf: fix missing __WORDSIZE definitionAndrii Nakryiko
hashmap.h depends on __WORDSIZE being defined. It is defined by glibc/musl in different headers. It's an explicit goal for musl to be "non-detectable" at compilation time, so instead include glibc header if glibc is explicitly detected and fall back to musl header otherwise. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Fixes: e3b924224028 ("libbpf: add resizable non-thread safe internal hashmap") Link: https://lkml.kernel.org/r/20190718173021.2418606-1-andriin@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29perf tools: Fix perf.data documentation units for memory sizeVince Weaver
The perf.data-file-format documentation incorrectly says the HEADER_TOTAL_MEM results are in bytes. The results are in kilobytes (perf reads the value from /proc/meminfo) Signed-off-by: Vince Weaver <vincent.weaver@maine.edu> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1907251155500.22624@macbook-air Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29perf header: Fix use of unitialized value warningNumfor Mbiziwo-Tiapo
When building our local version of perf with MSAN (Memory Sanitizer) and running the perf record command, MSAN throws a use of uninitialized value warning in "tools/perf/util/util.c:333:6". This warning stems from the "buf" variable being passed into "write". It originated as the variable "ev" with the type union perf_event* defined in the "perf_event__synthesize_attr" function in "tools/perf/util/header.c". In the "perf_event__synthesize_attr" function they allocate space with a malloc call using ev, then go on to only assign some of the member variables before passing "ev" on as a parameter to the "process" function therefore "ev" contains uninitialized memory. Changing the malloc call to zalloc to initialize all the members of "ev" which gets rid of the warning. To reproduce this warning, build perf by running: make -C tools/perf CLANG=1 CC=clang EXTRA_CFLAGS="-fsanitize=memory\ -fsanitize-memory-track-origins" (Additionally, llvm might have to be installed and clang might have to be specified as the compiler - export CC=/usr/bin/clang) then running: tools/perf/perf record -o - ls / | tools/perf/perf --no-pager annotate\ -i - --stdio Please see the cover letter for why false positive warnings may be generated. Signed-off-by: Numfor Mbiziwo-Tiapo <nums@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Drayton <mbd@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20190724234500.253358-2-nums@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29perf header: Fix divide by zero error if f_header.attr_size==0Vince Weaver
So I have been having lots of trouble with hand-crafted perf.data files causing segfaults and the like, so I have started fuzzing the perf tool. First issue found: If f_header.attr_size is 0 in the perf.data file, then perf will crash with a divide-by-zero error. Committer note: Added a pr_err() to tell the user why the command failed. Signed-off-by: Vince Weaver <vincent.weaver@maine.edu> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1907231100440.14532@macbook-air Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29tools headers UAPI: Sync if_link.h with the kernelArnaldo Carvalho de Melo
To pick the changes in: 07a4ddec3ce9 ("bonding: add an option to specify a delay between peer notifications") And silence this build warning: Kernel ABI header at 'tools/include/uapi/linux/if_link.h' differs from latest version at 'include/uapi/linux/if_link.h' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Vincent Bernat <vincent@bernat.ch> Link: https://lkml.kernel.org/n/tip-3liw4exxh8goc0rq9xryl2kv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29tools headers UAPI: Sync sched.h with the kernelArnaldo Carvalho de Melo
To get the changes in: a509a7cd7974 ("sched/uclamp: Extend sched_setattr() to support utilization clamping") 1d6362fa0cfc ("sched/core: Allow sched_setattr() to use the current policy") 7f192e3cd316 ("fork: add clone3") And silence this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/sched.h' differs from latest version at 'include/uapi/linux/sched.h' diff -u tools/include/uapi/linux/sched.h include/uapi/linux/sched.h No changes in tools/ due to the above. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christian Brauner <christian@brauner.io> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Patrick Bellasi <patrick.bellasi@arm.com> Link: https://lkml.kernel.org/n/tip-mtrpsjrux5hgyr5uf8l1aa46@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29tools headers UAPI: Sync usbdevice_fs.h with the kernels to get new ioctlArnaldo Carvalho de Melo
To get the changes in: 6d101f24f1dd ("USB: add usbfs ioctl to retrieve the connection parameters") And address this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/usbdevice_fs.h' differs from latest version at 'include/uapi/linux/usbdevice_fs.h' diff -u tools/include/uapi/linux/usbdevice_fs.h include/uapi/linux/usbdevice_fs.h Which ends up autogenerating a ioctl_cmd->string table used by 'perf trace': $ tools/perf/trace/beauty/usbdevfs_ioctl.sh > before $ cp include/uapi/linux/usbdevice_fs.h tools/include/uapi/linux/usbdevice_fs.h $ tools/perf/trace/beauty/usbdevfs_ioctl.sh > after $ diff -u before after --- before 2019-07-26 15:26:55.513636844 -0300 +++ after 2019-07-26 15:29:11.650518677 -0300 @@ -23,6 +23,7 @@ [2] = "BULK", [30] = "DROP_PRIVILEGES", [31] = "GET_SPEED", + [32] = "CONNINFO_EX", [3] = "RESETEP", [4] = "SETINTERFACE", [5] = "SETCONFIGURATION", $ Now 'perf trace' ioctl beautifier will translate this new ioctl to a string and at some point will allow filtering the 'ioctl' syscall with something like this in a system wide strace-like sessin: # perf trace -e ioctl/cmd=USBDEVFS_CONNINFO_EX/ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-tkdfbgzqypwco96b309c0ovd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29tools perf beauty: Fix usbdevfs_ioctl table generator to handle _IOC()Arnaldo Carvalho de Melo
In addition to _IOW() and _IOR(), to handle this case: #define USBDEVFS_CONNINFO_EX(len) _IOC(_IOC_READ, 'U', 32, len) That will happen in the next sync of this header file. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-3br5e4t64e4lp0goo84che3s@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29tools headers UAPI: Update tools's copy of drm.h headersArnaldo Carvalho de Melo
Picking the changes from: c5d3e39caa45 ("drm/i915: Engine discovery query") a88b6e4cbafd ("drm/i915: Allow specification of parallel execbuf") ee1136908e9b ("drm/i915/execlists: Virtual engine bonding") 6d06779e8672 ("drm/i915: Load balancing across a virtual engine") b81dde719439 ("drm/i915: Allow userspace to clone contexts on creation") 8319f44c0525 ("drm/i915: Re-expose SINGLE_TIMELINE flags for context creation") e620f7b3a263 ("drm/i915: Extend I915_CONTEXT_PARAM_SSEU to support local ctx->engine[]") 976b55f0e1db ("drm/i915: Allow a context to define its set of engines") 7f3f317a66ca ("drm/i915: Restore control over ppgtt for context creation ABI") 75b3f1cb50bd ("drm: Fix drm.h uapi header for GNU/kFreeBSD") Silencing these perf build warnings: Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h' diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h Now 'perf trace' and other code that might use the tools/perf/trace/beauty autogenerated tables will be able to translate this new ioctl code into a string: $ tools/perf/trace/beauty/drm_ioctl.sh > before $ cp include/uapi/drm/i915_drm.h tools/include/uapi/drm/i915_drm.h $ tools/perf/trace/beauty/drm_ioctl.sh > after $ diff -u before after --- before 2019-07-26 13:02:22.052723640 -0300 +++ after 2019-07-26 13:02:35.354906036 -0300 @@ -163,4 +163,6 @@ [DRM_COMMAND_BASE + 0x37] = "I915_PERF_ADD_CONFIG", [DRM_COMMAND_BASE + 0x38] = "I915_PERF_REMOVE_CONFIG", [DRM_COMMAND_BASE + 0x39] = "I915_QUERY", + [DRM_COMMAND_BASE + 0x3a] = "I915_GEM_VM_CREATE", + [DRM_COMMAND_BASE + 0x3b] = "I915_GEM_VM_DESTROY", }; $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Eric Anholt <eric@anholt.net> Cc: James Clarke <jrtc27@jrtc27.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://lkml.kernel.org/n/tip-a9173whgu3h1vo24jgdg5do8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-13 12:31:17 +0000