From 3a4fa0a25da81600ea0bcd75692ae8ca6050d165 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Fri, 19 Oct 2007 23:10:43 +0200 Subject: Fix misspellings of "system", "controller", "interrupt" and "necessary". Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day Signed-off-by: Adrian Bunk --- Documentation/filesystems/Locking | 2 +- Documentation/mips/AU1xxx_IDE.README | 2 +- arch/arm/mach-at91/gpio.c | 2 +- arch/arm/mach-s3c2410/clock.c | 2 +- arch/arm/mach-s3c2412/clock.c | 2 +- arch/arm/mach-s3c2443/clock.c | 2 +- arch/cris/arch-v10/drivers/pcf8563.c | 2 +- arch/cris/arch-v32/drivers/pcf8563.c | 2 +- arch/h8300/kernel/irq.c | 2 +- arch/m68knommu/platform/5307/pit.c | 2 +- arch/mips/kernel/module.c | 2 +- arch/mips/pci/pci-excite.c | 2 +- arch/mips/sni/pcimt.c | 2 +- arch/powerpc/platforms/celleb/scc_uhc.c | 2 +- arch/sh64/kernel/pci_sh5.c | 2 +- arch/x86/kernel/suspend_64.c | 2 +- drivers/ata/ahci.c | 2 +- drivers/ata/libata-sff.c | 2 +- drivers/ata/pata_cs5530.c | 2 +- drivers/ata/pata_cs5535.c | 2 +- drivers/ata/pata_it821x.c | 4 ++-- drivers/ata/pata_mpiix.c | 2 +- drivers/ata/pata_ns87410.c | 2 +- drivers/ata/pata_oldpiix.c | 2 +- drivers/ata/pata_radisys.c | 2 +- drivers/ata/pata_sc1200.c | 2 +- drivers/ata/pata_sil680.c | 2 +- drivers/ata/pata_via.c | 2 +- drivers/atm/firestream.c | 2 +- drivers/block/rd.c | 2 +- drivers/char/n_tty.c | 4 ++-- drivers/char/rocket.c | 2 +- drivers/char/tty_io.c | 8 ++++---- drivers/char/tty_ioctl.c | 2 +- drivers/ide/ide-tape.c | 2 +- drivers/ide/pci/it821x.c | 4 ++-- drivers/ide/pci/siimage.c | 2 +- drivers/md/dm-crypt.c | 2 +- drivers/media/dvb/bt8xx/bt878.c | 2 +- drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c | 2 +- drivers/media/video/bt8xx/bttv-cards.c | 22 +++++++++++----------- drivers/media/video/em28xx/em28xx-video.c | 2 +- drivers/misc/sony-laptop.c | 2 +- drivers/net/amd8111e.c | 2 +- drivers/net/au1000_eth.c | 2 +- drivers/net/bonding/bond_sysfs.c | 2 +- drivers/net/e100.c | 2 +- drivers/net/irda/donauboe.c | 2 +- drivers/net/smc911x.c | 2 +- drivers/net/spider_net.c | 2 +- drivers/net/tc35815.c | 4 ++-- drivers/net/via-velocity.c | 2 +- drivers/s390/block/dasd_3990_erp.c | 2 +- drivers/s390/char/sclp_cpi.c | 2 +- drivers/scsi/aacraid/aacraid.h | 2 +- drivers/scsi/aic7xxx/cam.h | 2 +- drivers/scsi/dc395x.c | 6 +++--- drivers/scsi/megaraid/megaraid_mbox.c | 2 +- drivers/scsi/qla4xxx/ql4_init.c | 2 +- drivers/scsi/sd.c | 2 +- drivers/spi/mpc52xx_psc_spi.c | 2 +- drivers/usb/host/ehci-hub.c | 2 +- drivers/usb/host/sl811-hcd.c | 2 +- fs/jfs/jfs_dtree.c | 2 +- fs/ocfs2/dcache.c | 2 +- fs/reiserfs/super.c | 2 +- fs/super.c | 4 ++-- include/asm-arm/dma-mapping.h | 2 +- include/asm-mips/pci/bridge.h | 2 +- include/asm-sh/se7751.h | 2 +- include/asm-sh/systemh7751.h | 2 +- include/linux/ipmi_smi.h | 2 +- kernel/hrtimer.c | 2 +- kernel/sched.c | 4 ++-- kernel/taskstats.c | 2 +- lib/kobject_uevent.c | 2 +- net/irda/discovery.c | 2 +- net/iucv/iucv.c | 2 +- net/netfilter/xt_CONNMARK.c | 2 +- net/netfilter/xt_connmark.c | 2 +- net/sched/em_meta.c | 2 +- sound/core/seq/seq_midi_emul.c | 8 ++++---- sound/drivers/opl3/opl3_midi.c | 2 +- sound/isa/es18xx.c | 4 ++-- sound/mips/au1x00.c | 8 ++++---- sound/pci/au88x0/au88x0.c | 2 +- sound/soc/soc-core.c | 2 +- sound/soc/soc-dapm.c | 2 +- sound/synth/emux/emux_synth.c | 2 +- 89 files changed, 117 insertions(+), 117 deletions(-) diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index fe26cc978523..37c10cba7177 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -224,7 +224,7 @@ against the page the filesystem should redirty the page with redirty_page_for_writepage(), then unlock the page and return zero. This may also be done to avoid internal deadlocks, but rarely. -If the filesytem is called for sync then it must wait on any +If the filesystem is called for sync then it must wait on any in-progress I/O and then start new I/O. The filesystem should unlock the page synchronously, before returning to the diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README index afb31c141d9d..5c8334123f4f 100644 --- a/Documentation/mips/AU1xxx_IDE.README +++ b/Documentation/mips/AU1xxx_IDE.README @@ -59,7 +59,7 @@ Four configs variables are introduced: CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - enable the PIO+DBDMA mode CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - enable the MWDMA mode CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - set Burstable FIFO in DBDMA - controler + controller CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size per descriptor diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index ba4a1bb3ee40..aa2d365c93fb 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -439,7 +439,7 @@ void __init at91_gpio_irq_setup(void) for (i = 0; i < 32; i++, pin++) { /* * Can use the "simple" and not "edge" handler since it's - * shorter, and the AIC handles interupts sanely. + * shorter, and the AIC handles interrupts sanely. */ set_irq_chip(pin, &gpio_irqchip); set_irq_handler(pin, handle_simple_irq); diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index cab9d6265e9e..2bfaa6102025 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -238,7 +238,7 @@ int __init s3c2410_baseclk_add(void) } /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsytems such as the LCD which do + * be using at boot time, as subsystems such as the LCD which do * their own DMA requests to the bus can cause the system to lockup * if they where in the middle of requesting bus access. * diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c index 8543dd6df391..458993601897 100644 --- a/arch/arm/mach-s3c2412/clock.c +++ b/arch/arm/mach-s3c2412/clock.c @@ -689,7 +689,7 @@ int __init s3c2412_baseclk_add(void) } /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsytems such as the LCD which do + * be using at boot time, as subsystems such as the LCD which do * their own DMA requests to the bus can cause the system to lockup * if they where in the middle of requesting bus access. * diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index 58402948c47c..b42f956738d0 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -1005,7 +1005,7 @@ void __init s3c2443_init_clocks(int xtal) } /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsytems such as the LCD which do + * be using at boot time, as subsystems such as the LCD which do * their own DMA requests to the bus can cause the system to lockup * if they where in the middle of requesting bus access. * diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c index 1de0026bb94e..c263b8232dbc 100644 --- a/arch/cris/arch-v10/drivers/pcf8563.c +++ b/arch/cris/arch-v10/drivers/pcf8563.c @@ -4,7 +4,7 @@ * From Phillips' datasheet: * * The PCF8563 is a CMOS real-time clock/calendar optimized for low power - * consumption. A programmable clock output, interupt output and voltage + * consumption. A programmable clock output, interrupt output and voltage * low detector are also provided. All address and data are transferred * serially via two-line bidirectional I2C-bus. Maximum bus speed is * 400 kbits/s. The built-in word address register is incremented diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c index da479a14f836..6dbd700d3d66 100644 --- a/arch/cris/arch-v32/drivers/pcf8563.c +++ b/arch/cris/arch-v32/drivers/pcf8563.c @@ -4,7 +4,7 @@ * From Phillips' datasheet: * * The PCF8563 is a CMOS real-time clock/calendar optimized for low power - * consumption. A programmable clock output, interupt output and voltage + * consumption. A programmable clock output, interrupt output and voltage * low detector are also provided. All address and data are transferred * serially via two-line bidirectional I2C-bus. Maximum bus speed is * 400 kbits/s. The built-in word address register is incremented diff --git a/arch/h8300/kernel/irq.c b/arch/h8300/kernel/irq.c index 43d21e93f41f..8dec4dd57b4e 100644 --- a/arch/h8300/kernel/irq.c +++ b/arch/h8300/kernel/irq.c @@ -68,7 +68,7 @@ static void h8300_shutdown_irq(unsigned int irq) } /* - * h8300 interrupt controler implementation + * h8300 interrupt controller implementation */ struct irq_chip h8300irq_chip = { .name = "H8300-INTC", diff --git a/arch/m68knommu/platform/5307/pit.c b/arch/m68knommu/platform/5307/pit.c index e53c446d10e4..f18352fa35a6 100644 --- a/arch/m68knommu/platform/5307/pit.c +++ b/arch/m68knommu/platform/5307/pit.c @@ -83,7 +83,7 @@ unsigned long coldfire_pit_offset(void) /* * If we are still in the first half of the upcount and a - * timer interupt is pending, then add on a ticks worth of time. + * timer interrupt is pending, then add on a ticks worth of time. */ offset = ((pmr - pcntr) * (1000000 / HZ)) / pmr; if ((offset < (1000000 / HZ / 2)) && (*ipr & MCFPIT_IMR_IBIT)) diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c index cb0801437b66..e7ed0ac48537 100644 --- a/arch/mips/kernel/module.c +++ b/arch/mips/kernel/module.c @@ -381,7 +381,7 @@ const struct exception_table_entry *search_module_dbetables(unsigned long addr) return e; } -/* Put in dbe list if neccessary. */ +/* Put in dbe list if necessary. */ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *me) diff --git a/arch/mips/pci/pci-excite.c b/arch/mips/pci/pci-excite.c index 3c86c77cb74f..8a56876afcc6 100644 --- a/arch/mips/pci/pci-excite.c +++ b/arch/mips/pci/pci-excite.c @@ -131,7 +131,7 @@ static int __init basler_excite_pci_setup(void) ocd_writel(0x00000000, bar + 0x100); } - /* Finally, enable the PCI interupt */ + /* Finally, enable the PCI interrupt */ #if USB_IRQ > 7 set_c0_intcontrol(1 << USB_IRQ); #else diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c index 39bb15f1f2a6..4df070f2ff5d 100644 --- a/arch/mips/sni/pcimt.c +++ b/arch/mips/sni/pcimt.c @@ -246,7 +246,7 @@ static void pcimt_hwint1(void) /* * Note: ASIC PCI's builtin interrupt achknowledge feature is * broken. Using it may result in loss of some or all i8259 - * interupts, so don't use PCIMT_INT_ACKNOWLEDGE ... + * interrupts, so don't use PCIMT_INT_ACKNOWLEDGE ... */ irq = i8259_irq(); if (unlikely(irq < 0)) diff --git a/arch/powerpc/platforms/celleb/scc_uhc.c b/arch/powerpc/platforms/celleb/scc_uhc.c index a7c548bde2e3..b59c38a06e3e 100644 --- a/arch/powerpc/platforms/celleb/scc_uhc.c +++ b/arch/powerpc/platforms/celleb/scc_uhc.c @@ -36,7 +36,7 @@ static inline int uhc_clkctrl_ready(u32 val) } /* - * UHC(usb host controler) enable function. + * UHC(usb host controller) enable function. * affect to both of OHCI and EHCI core module. */ static void enable_scc_uhc(struct pci_dev *dev) diff --git a/arch/sh64/kernel/pci_sh5.c b/arch/sh64/kernel/pci_sh5.c index 388bb711f1b0..b4d9534d2b0e 100644 --- a/arch/sh64/kernel/pci_sh5.c +++ b/arch/sh64/kernel/pci_sh5.c @@ -480,7 +480,7 @@ static int __init pcibios_init(void) return -EINVAL; } - /* The pci subsytem needs to know where memory is and how much + /* The pci subsystem needs to know where memory is and how much * of it there is. I've simply made these globals. A better mechanism * is probably needed. */ diff --git a/arch/x86/kernel/suspend_64.c b/arch/x86/kernel/suspend_64.c index f8fafe527ff1..76274eeae9a9 100644 --- a/arch/x86/kernel/suspend_64.c +++ b/arch/x86/kernel/suspend_64.c @@ -123,7 +123,7 @@ void fix_processor_context(void) int cpu = smp_processor_id(); struct tss_struct *t = &per_cpu(init_tss, cpu); - set_tss_desc(cpu,t); /* This just modifies memory; should not be neccessary. But... This is neccessary, because 386 hardware has concept of busy TSS or some similar stupidity. */ + set_tss_desc(cpu,t); /* This just modifies memory; should not be necessary. But... This is necessary, because 386 hardware has concept of busy TSS or some similar stupidity. */ cpu_gdt(cpu)[GDT_ENTRY_TSS].type = 9; diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 10bc3f64c453..47c806040524 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1479,7 +1479,7 @@ static void ahci_port_intr(struct ata_port *ap) return; } - /* hmmm... a spurious interupt */ + /* hmmm... a spurious interrupt */ /* if !NCQ, ignore. No modern ATA device has broken HSM * implementation for non-NCQ commands. diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index f9e4cd527942..8227c45109ec 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -856,7 +856,7 @@ err_out: * @pdev: PCI device * * Some PCI ATA devices report simplex mode but in fact can be told to - * enter non simplex mode. This implements the neccessary logic to + * enter non simplex mode. This implements the necessary logic to * perform the task on such devices. Calling it on other devices will * have -undefined- behaviour. */ diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index 57e827e4109e..e1818fdd9159 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -138,7 +138,7 @@ static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev) * * Called when the libata layer is about to issue a command. We wrap * this interface so that we can load the correct ATA timings if - * neccessary. Specifically we have a problem that there is only + * necessary. Specifically we have a problem that there is only * one MWDMA/UDMA bit. */ diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index 3578593a882b..01324530d052 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -25,7 +25,7 @@ * Documentation: * Available from AMD web site. * TODO - * Review errata to see if serializing is neccessary + * Review errata to see if serializing is necessary */ #include diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index 988ef736b936..ca9aae09daed 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -105,7 +105,7 @@ struct it821x_dev /* * We allow users to force the card into non raid mode without - * flashing the alternative BIOS. This is also neccessary right now + * flashing the alternative BIOS. This is also necessary right now * for embedded platforms that cannot run a PC BIOS but are using this * device. */ @@ -383,7 +383,7 @@ static void it821x_passthru_bmdma_stop(struct ata_queued_cmd *qc) * @ap: ATA port * @device: Device number (not pointer) * - * Device selection hook. If neccessary perform clock switching + * Device selection hook. If necessary perform clock switching */ static void it821x_passthru_dev_select(struct ata_port *ap, diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c index d5483087a3fa..c0d9e0cf208c 100644 --- a/drivers/ata/pata_mpiix.c +++ b/drivers/ata/pata_mpiix.c @@ -129,7 +129,7 @@ static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev) * * Called when the libata layer is about to issue a command. We wrap * this interface so that we can load the correct ATA timings if - * neccessary. Our logic also clears TIME0/TIME1 for the other device so + * necessary. Our logic also clears TIME0/TIME1 for the other device so * that, even if we get this wrong, cycles to the other device will * be made PIO0. */ diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c index 6e8e55745b7b..9fe66fd75017 100644 --- a/drivers/ata/pata_ns87410.c +++ b/drivers/ata/pata_ns87410.c @@ -124,7 +124,7 @@ static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev) * * Called when the libata layer is about to issue a command. We wrap * this interface so that we can load the correct ATA timings if - * neccessary. + * necessary. */ static unsigned int ns87410_qc_issue_prot(struct ata_queued_cmd *qc) diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c index 3cd5eb2b6c91..44da09ace52c 100644 --- a/drivers/ata/pata_oldpiix.c +++ b/drivers/ata/pata_oldpiix.c @@ -200,7 +200,7 @@ static void oldpiix_set_dmamode (struct ata_port *ap, struct ata_device *adev) * * Called when the libata layer is about to issue a command. We wrap * this interface so that we can load the correct ATA timings if - * neccessary. Our logic also clears TIME0/TIME1 for the other device so + * necessary. Our logic also clears TIME0/TIME1 for the other device so * that, even if we get this wrong, cycles to the other device will * be made PIO0. */ diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c index d5b76497f4a2..8109b08fc024 100644 --- a/drivers/ata/pata_radisys.c +++ b/drivers/ata/pata_radisys.c @@ -161,7 +161,7 @@ static void radisys_set_dmamode (struct ata_port *ap, struct ata_device *adev) * * Called when the libata layer is about to issue a command. We wrap * this interface so that we can load the correct ATA timings if - * neccessary. Our logic also clears TIME0/TIME1 for the other device so + * necessary. Our logic also clears TIME0/TIME1 for the other device so * that, even if we get this wrong, cycles to the other device will * be made PIO0. */ diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index 21ebc485ca4b..725a8586cd6e 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -156,7 +156,7 @@ static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev) * * Called when the libata layer is about to issue a command. We wrap * this interface so that we can load the correct ATA timings if - * neccessary. Specifically we have a problem that there is only + * necessary. Specifically we have a problem that there is only * one MWDMA/UDMA bit. */ diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index 4dc2e73298fd..5c1e9cb59ecb 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -16,7 +16,7 @@ * * If you have strange problems with nVidia chipset systems please * see the SI support documentation and update your system BIOS - * if neccessary + * if necessary * * TODO * If we know all our devices are LBA28 (or LBA28 sized) we could use diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 5d41b6612d7f..ea7a9a652e61 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -420,7 +420,7 @@ static struct ata_port_operations via_port_ops_noirq = { * @pdev: PCI device * @flags: configuration flags * - * Set the FIFO properties for this device if neccessary. Used both on + * Set the FIFO properties for this device if necessary. Used both on * set up and on and the resume path */ diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c index 94ebc9dc40fd..f8f7139c07c1 100644 --- a/drivers/atm/firestream.c +++ b/drivers/atm/firestream.c @@ -1596,7 +1596,7 @@ static irqreturn_t fs_irq (int irq, void *dev_id) /* print the bits in the ISR register. */ if (fs_debug & FS_DEBUG_IRQ) { - /* The FS_DEBUG things are unneccesary here. But this way it is + /* The FS_DEBUG things are unnecessary here. But this way it is clear for grep that these are debug prints. */ fs_dprintk (FS_DEBUG_IRQ, "IRQ status:"); for (i=0;i<27;i++) diff --git a/drivers/block/rd.c b/drivers/block/rd.c index 08176d23a46c..47f8ac6cce57 100644 --- a/drivers/block/rd.c +++ b/drivers/block/rd.c @@ -365,7 +365,7 @@ static int rd_open(struct inode *inode, struct file *filp) /* * Deep badness. rd_blkdev_pagecache_IO() needs to allocate * pagecache pages within a request_fn. We cannot recur back - * into the filesytem which is mounted atop the ramdisk, because + * into the filesystem which is mounted atop the ramdisk, because * that would deadlock on fs locks. And we really don't want * to reenter rd_blkdev_pagecache_IO when we're already within * that function. diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c index 038056911934..596c7173997b 100644 --- a/drivers/char/n_tty.c +++ b/drivers/char/n_tty.c @@ -437,7 +437,7 @@ static inline void finish_erasing(struct tty_struct *tty) * @c: character input * @tty: terminal device * - * Perform erase and neccessary output when an erase character is + * Perform erase and necessary output when an erase character is * present in the stream from the driver layer. Handles the complexities * of UTF-8 multibyte symbols. */ @@ -657,7 +657,7 @@ static inline void n_tty_receive_overrun(struct tty_struct *tty) * @c: character * * Process a parity error and queue the right data to indicate - * the error case if neccessary. Locking as per n_tty_receive_buf. + * the error case if necessary. Locking as per n_tty_receive_buf. */ static inline void n_tty_receive_parity_error(struct tty_struct *tty, unsigned char c) diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c index 7e6a3a413bb2..d83419c3857e 100644 --- a/drivers/char/rocket.c +++ b/drivers/char/rocket.c @@ -563,7 +563,7 @@ static void rp_do_poll(unsigned long dummy) /* Get a ptr to the board's control struct */ ctlp = sCtlNumToCtlPtr(ctrl); - /* Get the interupt status from the board */ + /* Get the interrupt status from the board */ #ifdef CONFIG_PCI if (ctlp->BusType == isPCI) CtlMask = sPCIGetControllerIntStatus(ctlp); diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 13a53575a016..f36fecd3fd26 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -943,7 +943,7 @@ EXPORT_SYMBOL_GPL(tty_ldisc_deref); * @tty: terminal to activate ldisc on * * Set the TTY_LDISC flag when the line discipline can be called - * again. Do neccessary wakeups for existing sleepers. + * again. Do necessary wakeups for existing sleepers. * * Note: nobody should set this bit except via this function. Clearing * directly is allowed. @@ -1504,7 +1504,7 @@ EXPORT_SYMBOL(tty_hangup); * * The user has asked via system call for the terminal to be hung up. * We do this synchronously so that when the syscall returns the process - * is complete. That guarantee is neccessary for security reasons. + * is complete. That guarantee is necessary for security reasons. */ void tty_vhangup(struct tty_struct * tty) @@ -1691,7 +1691,7 @@ EXPORT_SYMBOL(stop_tty); * @tty: tty to start * * Start a tty that has been stopped if at all possible. Perform - * any neccessary wakeups and propagate the TIOCPKT status. If this + * any necessary wakeups and propagate the TIOCPKT status. If this * is the tty was previous stopped and is being started then the * driver start method is invoked and the line discipline woken. * @@ -2877,7 +2877,7 @@ static int tty_fasync(int fd, struct file * filp, int on) * @tty: tty to fake input into * @p: pointer to character * - * Fake input to a tty device. Does the neccessary locking and + * Fake input to a tty device. Does the necessary locking and * input management. * * FIXME: does not honour flow control ?? diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c index 0def089cc1f2..7a003504c265 100644 --- a/drivers/char/tty_ioctl.c +++ b/drivers/char/tty_ioctl.c @@ -444,7 +444,7 @@ static void change_termios(struct tty_struct * tty, struct ktermios * new_termio * @arg: user data * @opt: option information * - * Helper function to prepare termios data and run neccessary other + * Helper function to prepare termios data and run necessary other * functions before using change_termios to do the actual changes. * * Locking: diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 1fa57947bca0..b463cef2de63 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -565,7 +565,7 @@ typedef struct os_dat_s { * The following parameter is used to select the point in the internal * tape fifo in which we will start to refill the buffer. Decreasing * the following parameter will improve the system's latency and - * interactive response, while using a high value might improve sytem + * interactive response, while using a high value might improve system * throughput. */ #define IDETAPE_FIFO_THRESHOLD 2 diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index ec45b7247209..08e820e89ae2 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c @@ -95,7 +95,7 @@ struct it821x_dev /* * We allow users to force the card into non raid mode without - * flashing the alternative BIOS. This is also neccessary right now + * flashing the alternative BIOS. This is also necessary right now * for embedded platforms that cannot run a PC BIOS but are using this * device. */ @@ -564,7 +564,7 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif) /* * Not in the docs but according to the reference driver - * this is neccessary. + * this is necessary. */ pci_read_config_byte(hwif->pci_dev, 0x08, &conf); diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 689786df1ede..1353afb10a4d 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -26,7 +26,7 @@ * * If you have strange problems with nVidia chipset systems please * see the SI support documentation and update your system BIOS - * if neccessary + * if necessary * * The Dell DRAC4 has some interesting features including effectively hot * unplugging/replugging the virtual CD interface when the DRAC is reset. diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 64fee90bb68b..4a5849b55197 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -112,7 +112,7 @@ static void clone_init(struct dm_crypt_io *, struct bio *); * Different IV generation algorithms: * * plain: the initial vector is the 32-bit little-endian version of the sector - * number, padded with zeros if neccessary. + * number, padded with zeros if necessary. * * essiv: "encrypted sector|salt initial vector", the sector number is * encrypted with the bulk cipher using a salt as key. The salt diff --git a/drivers/media/dvb/bt8xx/bt878.c b/drivers/media/dvb/bt8xx/bt878.c index eca602d9b3de..85e36a1d6d78 100644 --- a/drivers/media/dvb/bt8xx/bt878.c +++ b/drivers/media/dvb/bt8xx/bt878.c @@ -280,7 +280,7 @@ static irqreturn_t bt878_irq(int irq, void *dev_id) if (!(astat = (stat & mask))) return IRQ_NONE; /* this interrupt is not for me */ /* dprintk("bt878(%d) debug: irq count %d, stat 0x%8.8x, mask 0x%8.8x\n",bt->nr,count,stat,mask); */ - btwrite(astat, BT878_AINT_STAT); /* try to clear interupt condition */ + btwrite(astat, BT878_AINT_STAT); /* try to clear interrupt condition */ if (astat & (BT878_ASCERR | BT878_AOCERR)) { diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c index 288e79f2cb0f..7902ae1d9a18 100644 --- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c @@ -128,7 +128,7 @@ struct ttusb { struct dvb_frontend* fe; }; -/* ugly workaround ... don't know why it's neccessary to read */ +/* ugly workaround ... don't know why it's necessary to read */ /* all result codes. */ #define DEBUG 0 diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index dd6a7d68b07f..3162223a2ff5 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -4709,18 +4709,18 @@ adtvk503_audio(struct bttv *btv, struct video_audio *v, int set) * * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin. * GPIO pins are wired as: - * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler) - * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler) - * GPIO[7] - DATA (xpoint) - P1[7] (microcontroler) - * GPIO[8] - - P3[5] (microcontroler) - * GPIO[9] - RESET (xpoint) - P3[6] (microcontroler) - * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler) - * GPINTR - - P3[4] (microcontroler) + * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller) + * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller) + * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller) + * GPIO[8] - - P3[5] (microcontroller) + * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller) + * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller) + * GPINTR - - P3[4] (microcontroller) * - * The microcontroler is a 80C32 like. It should be possible to change xpoint - * configuration either directly (as we are doing) or using the microcontroler + * The microcontroller is a 80C32 like. It should be possible to change xpoint + * configuration either directly (as we are doing) or using the microcontroller * which is also wired to I2C interface. I have no further info on the - * microcontroler features, one would need to disassembly the firmware. + * microcontroller features, one would need to disassembly the firmware. * note: the vendor refused to give any information on this product, all * that stuff was found using a multimeter! :) */ @@ -4788,7 +4788,7 @@ static void tibetCS16_init(struct bttv *btv) * The analog switch is controlled by the "master", but the detection order * of the four BT878A chips is in an order which I just don't understand. * The "master" is actually the second controller to be detected. The - * logic on the board uses logical numbers for the 4 controlers, but + * logic on the board uses logical numbers for the 4 controllers, but * those numbers are different from the detection sequence. When working * with the analog switch, we need to "map" from the detection sequence * over to the board's logical controller number. This mapping sequence diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index b8d5327c438d..e467682aabd7 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -907,7 +907,7 @@ static int em28xx_set_fmt(struct em28xx *dev, unsigned int cmd, struct v4l2_form /* stop io in case it is already in progress */ if (dev->stream == STREAM_ON) { - em28xx_videodbg("VIDIOC_SET_FMT: interupting stream\n"); + em28xx_videodbg("VIDIOC_SET_FMT: interrupting stream\n"); if ((ret = em28xx_stream_interrupt(dev))) return ret; } diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index 1bfbb87e5793..fc70fbab7beb 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -277,7 +277,7 @@ static void do_sony_laptop_release_key(struct work_struct *work) static DECLARE_WORK(sony_laptop_release_key_work, do_sony_laptop_release_key); -/* forward event to the input subsytem */ +/* forward event to the input subsystem */ static void sony_laptop_report_input_event(u8 event) { struct input_dev *jog_dev = sony_laptop_input.jog_dev; diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c index 1cc74ec88a58..eebf5bb2b03a 100644 --- a/drivers/net/amd8111e.c +++ b/drivers/net/amd8111e.c @@ -1111,7 +1111,7 @@ static struct net_device_stats *amd8111e_get_stats(struct net_device * dev) return new_stats; } -/* This function recalculate the interupt coalescing mode on every interrupt +/* This function recalculate the interrupt coalescing mode on every interrupt according to the datarate and the packet rate. */ static int amd8111e_calc_coalesce(struct net_device *dev) diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index 185f98e3964c..504b7ce2747d 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -542,7 +542,7 @@ static struct { static int num_ifs; /* - * Setup the base address and interupt of the Au1xxx ethernet macs + * Setup the base address and interrupt of the Au1xxx ethernet macs * based on cpu type and whether the interface is enabled in sys_pinfunc * register. The last interface is enabled if SYS_PF_NI2 (bit 4) is 0. */ diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 80c0c8c415ed..855dc10ffa1b 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -55,7 +55,7 @@ static int expected_refcount = -1; static struct class *netdev_class; /*--------------------------- Data Structures -----------------------------*/ -/* Bonding sysfs lock. Why can't we just use the subsytem lock? +/* Bonding sysfs lock. Why can't we just use the subsystem lock? * Because kobject_register tries to acquire the subsystem lock. If * we already hold the lock (which we would if the user was creating * a new bond through the sysfs interface), we deadlock. diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 64f35e20fd48..3dbaec680b46 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1324,7 +1324,7 @@ static inline int e100_exec_cb_wait(struct nic *nic, struct sk_buff *skb, if (!--counter) break; } - /* ack any interupts, something could have been set */ + /* ack any interrupts, something could have been set */ iowrite8(~0, &nic->csr->scb.stat_ack); /* if the command failed, or is not OK, notify and return */ diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c index a82d8f98383d..1257e1a7e819 100644 --- a/drivers/net/irda/donauboe.c +++ b/drivers/net/irda/donauboe.c @@ -595,7 +595,7 @@ toshoboe_startchip (struct toshoboe_cb *self) OUTB ((physaddr >> 18) & 0xff, OBOE_RING_BASE1); OUTB ((physaddr >> 26) & 0x3f, OBOE_RING_BASE2); - /*Enable DMA controler in byte mode and RX */ + /*Enable DMA controller in byte mode and RX */ OUTB (CONFIG0H_DMA_ON, OBOE_CONFIG0H); /* Start up the clocks */ diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 7c60df46fc65..dd18af0ce676 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -1223,7 +1223,7 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id) } #endif - /* Handle PHY interupt condition */ + /* Handle PHY interrupt condition */ if (status & INT_STS_PHY_INT_) { DBG(SMC_DEBUG_MISC, "%s: PHY irq\n", dev->name); smc911x_phy_interrupt(dev); diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index 571060a3c91e..bccae7e5c6ad 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -1639,7 +1639,7 @@ spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg) /** * spider_net_interrupt - interrupt handler for spider_net - * @irq: interupt number + * @irq: interrupt number * @ptr: pointer to net_device * @regs: PU registers * diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c index 8038f2882c9b..d887c05588d5 100644 --- a/drivers/net/tc35815.c +++ b/drivers/net/tc35815.c @@ -1654,7 +1654,7 @@ tc35815_rx(struct net_device *dev) panic_queues(dev); } #endif - /* pass BD to controler */ + /* pass BD to controller */ #ifndef TC35815_USE_PACKEDBUFFER if (!lp->rx_skbs[curid].skb) { lp->rx_skbs[curid].skb = @@ -1694,7 +1694,7 @@ tc35815_rx(struct net_device *dev) } #endif for (i = 0; i < (bd_count + 1) / 2 + 1; i++) { - /* pass FD to controler */ + /* pass FD to controller */ #ifdef DEBUG lp->rfd_cur->fd.FDNext = cpu_to_le32(0xdeaddead); #else diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index 4ae05799ac44..5c4a92de9a07 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -1648,7 +1648,7 @@ static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx) * * Scan the queues looking for transmitted packets that * we can complete and clean up. Update any statistics as - * neccessary/ + * necessary/ */ static int velocity_tx_srv(struct velocity_info *vptr, u32 status) diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c index 8b9d68f6e016..69402f3a1453 100644 --- a/drivers/s390/block/dasd_3990_erp.c +++ b/drivers/s390/block/dasd_3990_erp.c @@ -2001,7 +2001,7 @@ dasd_3990_erp_compound_code(struct dasd_ccw_req * erp, char *sense) switch (sense[28]) { case 0x17: /* issue a Diagnostic Control command with an - * Inhibit Write subcommand and controler modifier */ + * Inhibit Write subcommand and controller modifier */ erp = dasd_3990_erp_DCTL(erp, 0x20); break; diff --git a/drivers/s390/char/sclp_cpi.c b/drivers/s390/char/sclp_cpi.c index 29fe2a5ec2fe..82a13d9fdfe4 100644 --- a/drivers/s390/char/sclp_cpi.c +++ b/drivers/s390/char/sclp_cpi.c @@ -157,7 +157,7 @@ cpi_prepare_req(void) sclp_ascebc_str(evb->system_name, CPI_LENGTH_SYSTEM_NAME); EBC_TOUPPER(evb->system_name, CPI_LENGTH_SYSTEM_NAME); - /* set sytem level */ + /* set system level */ evb->system_level = LINUX_VERSION_CODE; /* set sysplex name */ diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 03b51025a8f4..9abba8b90f70 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -1526,7 +1526,7 @@ struct aac_mntent { __le32 capacityhigh; }; -#define FSCS_NOTCLEAN 0x0001 /* fsck is neccessary before mounting */ +#define FSCS_NOTCLEAN 0x0001 /* fsck is necessary before mounting */ #define FSCS_READONLY 0x0002 /* possible result of broken mirror */ #define FSCS_HIDDEN 0x0004 /* should be ignored - set during a clear */ diff --git a/drivers/scsi/aic7xxx/cam.h b/drivers/scsi/aic7xxx/cam.h index 26f17e3fc45c..687aef6ef185 100644 --- a/drivers/scsi/aic7xxx/cam.h +++ b/drivers/scsi/aic7xxx/cam.h @@ -48,7 +48,7 @@ typedef enum { CAM_REQ_ABORTED, /* CCB request aborted by the host */ CAM_UA_ABORT, /* Unable to abort CCB request */ CAM_REQ_CMP_ERR, /* CCB request completed with an error */ - CAM_BUSY, /* CAM subsytem is busy */ + CAM_BUSY, /* CAM subsystem is busy */ CAM_REQ_INVALID, /* CCB request was invalid */ CAM_PATH_INVALID, /* Supplied Path ID is invalid */ CAM_SEL_TIMEOUT, /* Target Selection Timeout */ diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c index fd42d4789202..a9def6e1d30e 100644 --- a/drivers/scsi/dc395x.c +++ b/drivers/scsi/dc395x.c @@ -1808,12 +1808,12 @@ static irqreturn_t dc395x_interrupt(int irq, void *dev_id) irqreturn_t handled = IRQ_NONE; /* - * Check for pending interupt + * Check for pending interrupt */ scsi_status = DC395x_read16(acb, TRM_S1040_SCSI_STATUS); dma_status = DC395x_read8(acb, TRM_S1040_DMA_STATUS); if (scsi_status & SCSIINTERRUPT) { - /* interupt pending - let's process it! */ + /* interrupt pending - let's process it! */ dc395x_handle_interrupt(acb, scsi_status); handled = IRQ_HANDLED; } @@ -4579,7 +4579,7 @@ static void adapter_uninit_chip(struct AdapterCtlBlk *acb) if (acb->config & HCC_SCSI_RESET) reset_scsi_bus(acb); - /* clear any pending interupt state */ + /* clear any pending interrupt state */ DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS); } diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index e4e4c6a39ed6..78779209ac89 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -427,7 +427,7 @@ megaraid_exit(void) * @id : pci device id of the class of controllers * * This routine should be called whenever a new adapter is detected by the - * PCI hotplug susbsytem. + * PCI hotplug susbsystem. */ static int __devinit megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 1e29f51d596b..d692c713416a 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -1006,7 +1006,7 @@ int ql4xxx_lock_drvr_wait(struct scsi_qla_host *a) * qla4xxx_start_firmware - starts qla4xxx firmware * @ha: Pointer to host adapter structure. * - * This routine performs the neccessary steps to start the firmware for + * This routine performs the necessary steps to start the firmware for * the QLA4010 adapter. **/ static int qla4xxx_start_firmware(struct scsi_qla_host *ha) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 69f542c4923c..a69b155f39a2 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -676,7 +676,7 @@ static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo) * success as well). Returns a negated errno value in case of error. * * Note: most ioctls are forward onto the block subsystem or further - * down in the scsi subsytem. + * down in the scsi subsystem. **/ static int sd_ioctl(struct inode * inode, struct file * filp, unsigned int cmd, unsigned long arg) diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c index e9aba932f217..7051e6c5edc3 100644 --- a/drivers/spi/mpc52xx_psc_spi.c +++ b/drivers/spi/mpc52xx_psc_spi.c @@ -181,7 +181,7 @@ static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi, } - /* enable interupts and wait for wake up + /* enable interrupts and wait for wake up * if just one byte is expected the Rx FIFO genererates no * FFULL interrupt, so activate the RxRDY interrupt */ diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 0dcb4164dc83..735db4aec831 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -451,7 +451,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) /* Some boards (mostly VIA?) report bogus overcurrent indications, * causing massive log spam unless we completely ignore them. It - * may be relevant that VIA VT8235 controlers, where PORT_POWER is + * may be relevant that VIA VT8235 controllers, where PORT_POWER is * always set, seem to clear PORT_OCC and PORT_CSC when writing to * PORT_POWER; that's surprising, but maybe within-spec. */ diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 94d859aa73f8..ba370c56172c 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1556,7 +1556,7 @@ sl811h_start(struct usb_hcd *hcd) hcd->power_budget = sl811->board->power * 2; } - /* enable power and interupts */ + /* enable power and interrupts */ port_power(sl811, 1); return 0; diff --git a/fs/jfs/jfs_dtree.c b/fs/jfs/jfs_dtree.c index df0b8535de84..df25ecc418af 100644 --- a/fs/jfs/jfs_dtree.c +++ b/fs/jfs/jfs_dtree.c @@ -773,7 +773,7 @@ int dtSearch(struct inode *ip, struct component_name * key, ino_t * data, getChild: /* update max. number of pages to split */ if (BT_STACK_FULL(btstack)) { - /* Something's corrupted, mark filesytem dirty so + /* Something's corrupted, mark filesystem dirty so * chkdsk will fix it. */ jfs_error(sb, "stack overrun in dtSearch!"); diff --git a/fs/ocfs2/dcache.c b/fs/ocfs2/dcache.c index 014e73978dac..3094ddb7a254 100644 --- a/fs/ocfs2/dcache.c +++ b/fs/ocfs2/dcache.c @@ -376,7 +376,7 @@ out: * directory locks. The dentries have already been deleted on other * nodes via ocfs2_remote_dentry_delete(). * - * Normally, the VFS handles the d_move() for the file sytem, after + * Normally, the VFS handles the d_move() for the file system, after * the ->rename() callback. OCFS2 wants to handle this internally, so * the new lock can be created atomically with respect to the cluster. */ diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c index 57adfe90d5ae..98c3781bc069 100644 --- a/fs/reiserfs/super.c +++ b/fs/reiserfs/super.c @@ -319,7 +319,7 @@ static int finish_unfinished(struct super_block *s) /* to protect file being unlinked from getting lost we "safe" link files being unlinked. This link will be deleted in the same transaction with last - item of file. mounting the filesytem we scan all these links and remove + item of file. mounting the filesystem we scan all these links and remove files which almost got lost */ void add_save_link(struct reiserfs_transaction_handle *th, struct inode *inode, int truncate) diff --git a/fs/super.c b/fs/super.c index d28fde7e1cfb..ed1b93ca213c 100644 --- a/fs/super.c +++ b/fs/super.c @@ -417,7 +417,7 @@ restart: } /* - * Call the ->sync_fs super_op against all filesytems which are r/w and + * Call the ->sync_fs super_op against all filesystems which are r/w and * which implement it. * * This operation is careful to avoid the livelock which could easily happen @@ -425,7 +425,7 @@ restart: * is used only here. We set it against all filesystems and then clear it as * we sync them. So redirtied filesystems are skipped. * - * But if process A is currently running sync_filesytems and then process B + * But if process A is currently running sync_filesystems and then process B * calls sync_filesystems as well, process B will set all the s_need_sync_fs * flags again, which will cause process A to resync everything. Fix that with * a local mutex. diff --git a/include/asm-arm/dma-mapping.h b/include/asm-arm/dma-mapping.h index 678134bf2475..1eb8aac43228 100644 --- a/include/asm-arm/dma-mapping.h +++ b/include/asm-arm/dma-mapping.h @@ -401,7 +401,7 @@ extern void dma_sync_sg_for_device(struct device*, struct scatterlist*, int, enu * * On the SA-1111, a bug limits DMA to only certain regions of RAM. * On the IXP425, the PCI inbound window is 64MB (256MB total RAM) - * On some ADI engineering sytems, PCI inbound window is 32MB (12MB total RAM) + * On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM) * * The following are helper functions used by the dmabounce subystem * diff --git a/include/asm-mips/pci/bridge.h b/include/asm-mips/pci/bridge.h index b84feebf2cef..5f4b9d4e4114 100644 --- a/include/asm-mips/pci/bridge.h +++ b/include/asm-mips/pci/bridge.h @@ -538,7 +538,7 @@ typedef struct bridge_err_cmdword_s { BRIDGE_ISR_PMU_ESIZE_FAULT) /* - * List of Errors which are fatal and kill the sytem + * List of Errors which are fatal and kill the system */ #define BRIDGE_ISR_ERROR_FATAL \ ((BRIDGE_ISR_XTALK_ERROR & ~BRIDGE_ISR_XREAD_REQ_TIMEOUT)|\ diff --git a/include/asm-sh/se7751.h b/include/asm-sh/se7751.h index 02ca9347f043..b36792ac5d66 100644 --- a/include/asm-sh/se7751.h +++ b/include/asm-sh/se7751.h @@ -36,7 +36,7 @@ #define PA_LED 0xba000000 /* LED */ #define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */ -#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controler */ +#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ #define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ #define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ #define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ diff --git a/include/asm-sh/systemh7751.h b/include/asm-sh/systemh7751.h index b143bb2a2ca7..4161122c84ef 100644 --- a/include/asm-sh/systemh7751.h +++ b/include/asm-sh/systemh7751.h @@ -36,7 +36,7 @@ #define PA_LED 0xba000000 /* LED */ #define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */ -#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controler */ +#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ #define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ #define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ #define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ diff --git a/include/linux/ipmi_smi.h b/include/linux/ipmi_smi.h index efa292a52e7e..56ae438ae510 100644 --- a/include/linux/ipmi_smi.h +++ b/include/linux/ipmi_smi.h @@ -118,7 +118,7 @@ struct ipmi_smi_handlers /* Enable/disable firmware maintenance mode. Note that this is *not* the modes defined, this is simply an on/off setting. The message handler does the mode handling. Note - that this is called from interupt context, so it cannot + that this is called from interrupt context, so it cannot block. */ void (*set_maintenance_mode)(void *send_info, int enable); diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index b2b2c2b0a49b..dabfefb4ffdf 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -412,7 +412,7 @@ static int hrtimer_reprogram(struct hrtimer *timer, /* * When the callback is running, we do not reprogram the clock event * device. The timer callback is either running on a different CPU or - * the callback is executed in the hrtimer_interupt context. The + * the callback is executed in the hrtimer_interrupt context. The * reprogramming is handled either by the softirq, which called the * callback or at the end of the hrtimer_interrupt. */ diff --git a/kernel/sched.c b/kernel/sched.c index afe76ec2e7fe..a54bd9dfbedb 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -5146,7 +5146,7 @@ static int __migrate_task_irq(struct task_struct *p, int src_cpu, int dest_cpu) } /* - * Figure out where task on dead CPU should go, use force if neccessary. + * Figure out where task on dead CPU should go, use force if necessary. * NOTE: interrupts should be disabled by the caller */ static void move_task_off_dead_cpu(int dead_cpu, struct task_struct *p) @@ -5525,7 +5525,7 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu) case CPU_ONLINE: case CPU_ONLINE_FROZEN: - /* Strictly unneccessary, as first user will wake it. */ + /* Strictly unnecessary, as first user will wake it. */ wake_up_process(cpu_rq(cpu)->migration_thread); break; diff --git a/kernel/taskstats.c b/kernel/taskstats.c index 9f360f68aad6..354e74bc17c1 100644 --- a/kernel/taskstats.c +++ b/kernel/taskstats.c @@ -263,7 +263,7 @@ out: stats->version = TASKSTATS_VERSION; /* - * Accounting subsytems can also add calls here to modify + * Accounting subsystems can also add calls here to modify * fields of taskstats. */ return rc; diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c index 2e4eae5b0824..5886147252d0 100644 --- a/lib/kobject_uevent.c +++ b/lib/kobject_uevent.c @@ -126,7 +126,7 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action, else subsystem = kobject_name(&kset->kobj); if (!subsystem) { - pr_debug("unset subsytem caused the event to drop!\n"); + pr_debug("unset subsystem caused the event to drop!\n"); return 0; } diff --git a/net/irda/discovery.c b/net/irda/discovery.c index af0cea721d2a..80c33f408e3f 100644 --- a/net/irda/discovery.c +++ b/net/irda/discovery.c @@ -202,7 +202,7 @@ void irlmp_expire_discoveries(hashbin_t *log, __u32 saddr, int force) /* Drop the spinlock before calling the higher layers, as * we can't guarantee they won't call us back and create a * deadlock. We will work on our own private data, so we - * don't care to be interupted. - Jean II */ + * don't care to be interrupted. - Jean II */ spin_unlock_irqrestore(&log->hb_spinlock, flags); if(buffer == NULL) diff --git a/net/iucv/iucv.c b/net/iucv/iucv.c index 983058d432dc..a2f5a6ea3895 100644 --- a/net/iucv/iucv.c +++ b/net/iucv/iucv.c @@ -389,7 +389,7 @@ static void iucv_block_cpu(void *data) * iucv_declare_cpu * @data: unused * - * Declare a interupt buffer on this cpu. + * Declare a interrupt buffer on this cpu. */ static void iucv_declare_cpu(void *data) { diff --git a/net/netfilter/xt_CONNMARK.c b/net/netfilter/xt_CONNMARK.c index 8cc324b159e9..856793e8db7a 100644 --- a/net/netfilter/xt_CONNMARK.c +++ b/net/netfilter/xt_CONNMARK.c @@ -23,7 +23,7 @@ #include #include -MODULE_AUTHOR("Henrik Nordstrom "); +MODULE_AUTHOR("Henrik Nordstrom "); MODULE_DESCRIPTION("IP tables CONNMARK matching module"); MODULE_LICENSE("GPL"); MODULE_ALIAS("ipt_CONNMARK"); diff --git a/net/netfilter/xt_connmark.c b/net/netfilter/xt_connmark.c index 1071fc54d6d3..9f67920af41f 100644 --- a/net/netfilter/xt_connmark.c +++ b/net/netfilter/xt_connmark.c @@ -25,7 +25,7 @@ #include #include -MODULE_AUTHOR("Henrik Nordstrom "); +MODULE_AUTHOR("Henrik Nordstrom "); MODULE_DESCRIPTION("IP tables connmark match module"); MODULE_LICENSE("GPL"); MODULE_ALIAS("ipt_connmark"); diff --git a/net/sched/em_meta.c b/net/sched/em_meta.c index e9989610712c..ceda8890ab0e 100644 --- a/net/sched/em_meta.c +++ b/net/sched/em_meta.c @@ -55,7 +55,7 @@ * ppp0..9. * * NOTE: Certain meta values depend on other subsystems and are - * only available if that subsytem is enabled in the kernel. + * only available if that subsystem is enabled in the kernel. */ #include diff --git a/sound/core/seq/seq_midi_emul.c b/sound/core/seq/seq_midi_emul.c index d7c4fb86b9eb..17b3e6f13ca3 100644 --- a/sound/core/seq/seq_midi_emul.c +++ b/sound/core/seq/seq_midi_emul.c @@ -71,7 +71,7 @@ static void reset_all_channels(struct snd_midi_channel_set *chset); * such as GM, GS and XG. * There modes that this module will run in are: * Generic MIDI - no interpretation at all, it will just save current values - * of controlers etc. + * of controllers etc. * GM - You can use all gm_ prefixed elements of chan. Controls, RPN, NRPN, * SysEx will be interpreded as defined in General Midi. * GS - You can use all gs_ prefixed elements of chan. Codes for GS will be @@ -176,7 +176,7 @@ snd_midi_process_event(struct snd_midi_op *ops, ev->data.control.value); break; case SNDRV_SEQ_EVENT_NONREGPARAM: - /* Break it back into its controler values */ + /* Break it back into its controller values */ chan->param_type = SNDRV_MIDI_PARAM_TYPE_NONREGISTERED; chan->control[MIDI_CTL_MSB_DATA_ENTRY] = (ev->data.control.value >> 7) & 0x7f; @@ -189,7 +189,7 @@ snd_midi_process_event(struct snd_midi_op *ops, nrpn(ops, drv, chan, chanset); break; case SNDRV_SEQ_EVENT_REGPARAM: - /* Break it back into its controler values */ + /* Break it back into its controller values */ chan->param_type = SNDRV_MIDI_PARAM_TYPE_REGISTERED; chan->control[MIDI_CTL_MSB_DATA_ENTRY] = (ev->data.control.value >> 7) & 0x7f; @@ -267,7 +267,7 @@ note_off(struct snd_midi_op *ops, void *drv, struct snd_midi_channel *chan, } /* - * Do all driver independent operations for this controler and pass + * Do all driver independent operations for this controller and pass * events that need to take place immediately to the driver. */ static void diff --git a/sound/drivers/opl3/opl3_midi.c b/sound/drivers/opl3/opl3_midi.c index 1b6f227af370..3557b6e20eb5 100644 --- a/sound/drivers/opl3/opl3_midi.c +++ b/sound/drivers/opl3/opl3_midi.c @@ -808,7 +808,7 @@ static void snd_opl3_pitch_ctrl(struct snd_opl3 *opl3, struct snd_midi_channel * } /* - * Deal with a controler type event. This includes all types of + * Deal with a controller type event. This includes all types of * control events, not just the midi controllers */ void snd_opl3_control(void *p, int type, struct snd_midi_channel *chan) diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c index 4a7367a8ff9d..c1af28fd4a1f 100644 --- a/sound/isa/es18xx.c +++ b/sound/isa/es18xx.c @@ -623,7 +623,7 @@ static int snd_es18xx_capture_prepare(struct snd_pcm_substream *substream) (snd_pcm_format_width(runtime->format) == 16 ? 0x04 : 0x00) | (snd_pcm_format_unsigned(runtime->format) ? 0x00 : 0x20)); - /* Set DMA controler */ + /* Set DMA controller */ snd_dma_program(chip->dma1, runtime->dma_addr, size, DMA_MODE_READ | DMA_AUTOINIT); return 0; @@ -689,7 +689,7 @@ static int snd_es18xx_playback2_prepare(struct snd_es18xx *chip, (snd_pcm_format_width(runtime->format) == 16 ? 0x04 : 0x00) | (snd_pcm_format_unsigned(runtime->format) ? 0x00 : 0x20)); - /* Set DMA controler */ + /* Set DMA controller */ snd_dma_program(chip->dma1, runtime->dma_addr, size, DMA_MODE_WRITE | DMA_AUTOINIT); return 0; diff --git a/sound/mips/au1x00.c b/sound/mips/au1x00.c index 8a61a1191861..24460a558bf7 100644 --- a/sound/mips/au1x00.c +++ b/sound/mips/au1x00.c @@ -498,8 +498,8 @@ snd_au1000_ac97_read(struct snd_ac97 *ac97, unsigned short reg) int i; spin_lock(&au1000->ac97_lock); -/* would rather use the interupt than this polling but it works and I can't -get the interupt driven case to work efficiently */ +/* would rather use the interrupt than this polling but it works and I can't +get the interrupt driven case to work efficiently */ for (i = 0; i < 0x5000; i++) if (!(au1000->ac97_ioport->status & AC97C_CP)) break; @@ -535,8 +535,8 @@ snd_au1000_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short int i; spin_lock(&au1000->ac97_lock); -/* would rather use the interupt than this polling but it works and I can't -get the interupt driven case to work efficiently */ +/* would rather use the interrupt than this polling but it works and I can't +get the interrupt driven case to work efficiently */ for (i = 0; i < 0x5000; i++) if (!(au1000->ac97_ioport->status & AC97C_CP)) break; diff --git a/sound/pci/au88x0/au88x0.c b/sound/pci/au88x0/au88x0.c index f70286a7364a..26819e2f5761 100644 --- a/sound/pci/au88x0/au88x0.c +++ b/sound/pci/au88x0/au88x0.c @@ -191,7 +191,7 @@ snd_vortex_create(struct snd_card *card, struct pci_dev *pci, vortex_t ** rchip) /* Init audio core. * This must be done before we do request_irq otherwise we can get spurious - * interupts that we do not handle properly and make a mess of things */ + * interrupts that we do not handle properly and make a mess of things */ if ((err = vortex_core_init(chip)) != 0) { printk(KERN_ERR "hw core init failed\n"); goto core_out; diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 91651bdfa761..e6a67b58f296 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -264,7 +264,7 @@ out: } /* - * Power down the audio subsytem pmdown_time msecs after close is called. + * Power down the audio subsystem pmdown_time msecs after close is called. * This is to ensure there are no pops or clicks in between any music tracks * due to DAPM power cycling. */ diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index b3193e687db7..29a546fecacf 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -24,7 +24,7 @@ * o Automatic Mic Bias support * o Jack insertion power event initiation - e.g. hp insertion will enable * sinks, dacs, etc - * o Delayed powerdown of audio susbsytem to reduce pops between a quick + * o Delayed powerdown of audio susbsystem to reduce pops between a quick * device reopen. * * Todo: diff --git a/sound/synth/emux/emux_synth.c b/sound/synth/emux/emux_synth.c index 3733118d39bb..478369bb38c3 100644 --- a/sound/synth/emux/emux_synth.c +++ b/sound/synth/emux/emux_synth.c @@ -317,7 +317,7 @@ snd_emux_update_port(struct snd_emux_port *port, int update) /* - * Deal with a controler type event. This includes all types of + * Deal with a controller type event. This includes all types of * control events, not just the midi controllers */ void -- cgit v1.2.3