From bc2c90c974a0ed390327bbd94f49269e9f24e280 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 12 Aug 2012 16:21:00 +0100 Subject: IIO: Add basic MXS LRADC driver This driver is very basic. It supports userland trigger, buffer and raw access to channels. The support for delay channels is missing altogether. Signed-off-by: Marek Vasut Signed-off-by: Jonathan Cameron Cc: Jonathan Cameron Cc: Juergen Beisert Cc: Lars-Peter Clausen Cc: Shawn Guo Cc: Wolfgang Denk --- .../bindings/staging/iio/adc/mxs-lradc.txt | 15 + drivers/staging/iio/adc/Kconfig | 12 + drivers/staging/iio/adc/Makefile | 1 + drivers/staging/iio/adc/mxs-lradc.c | 590 +++++++++++++++++++++ 4 files changed, 618 insertions(+) create mode 100644 Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt create mode 100644 drivers/staging/iio/adc/mxs-lradc.c diff --git a/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt b/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt new file mode 100644 index 000000000000..801d58cb6d4d --- /dev/null +++ b/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt @@ -0,0 +1,15 @@ +* Freescale i.MX28 LRADC device driver + +Required properties: +- compatible: Should be "fsl,imx28-lradc" +- reg: Address and length of the register set for the device +- interrupts: Should contain the LRADC interrupts + +Examples: + + lradc@80050000 { + compatible = "fsl,imx28-lradc"; + reg = <0x80050000 0x2000>; + interrupts = <10 14 15 16 17 18 19 + 20 21 22 23 24 25>; + }; diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig index 67711b7d718a..845fb6c70ca3 100644 --- a/drivers/staging/iio/adc/Kconfig +++ b/drivers/staging/iio/adc/Kconfig @@ -200,6 +200,18 @@ config LPC32XX_ADC activate only one via device tree selection. Provides direct access via sysfs. +config MXS_LRADC + tristate "Freescale i.MX28 LRADC" + depends on ARCH_MXS + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for i.MX28 LRADC convertor + built into these chips. + + To compile this driver as a module, choose M here: the + module will be called mxs-lradc. + config SPEAR_ADC tristate "ST SPEAr ADC" depends on PLAT_SPEAR diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile index 14e98b62b70a..ecac9a0bb358 100644 --- a/drivers/staging/iio/adc/Makefile +++ b/drivers/staging/iio/adc/Makefile @@ -38,4 +38,5 @@ obj-$(CONFIG_ADT7310) += adt7310.o obj-$(CONFIG_ADT7410) += adt7410.o obj-$(CONFIG_AD7280) += ad7280a.o obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o +obj-$(CONFIG_MXS_LRADC) += mxs-lradc.o obj-$(CONFIG_SPEAR_ADC) += spear_adc.o diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c new file mode 100644 index 000000000000..ae549e572e5d --- /dev/null +++ b/drivers/staging/iio/adc/mxs-lradc.c @@ -0,0 +1,590 @@ +/* + * Freescale i.MX28 LRADC driver + * + * Copyright (c) 2012 DENX Software Engineering, GmbH. + * Marek Vasut + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include + +#define DRIVER_NAME "mxs-lradc" + +#define LRADC_MAX_DELAY_CHANS 4 +#define LRADC_MAX_MAPPED_CHANS 8 +#define LRADC_MAX_TOTAL_CHANS 16 + +#define LRADC_DELAY_TIMER_HZ 2000 + +/* + * Make this runtime configurable if necessary. Currently, if the buffered mode + * is enabled, the LRADC takes LRADC_DELAY_TIMER_LOOP samples of data before + * triggering IRQ. The sampling happens every (LRADC_DELAY_TIMER_PER / 2000) + * seconds. The result is that the samples arrive every 500mS. + */ +#define LRADC_DELAY_TIMER_PER 200 +#define LRADC_DELAY_TIMER_LOOP 5 + +static const char * const mxs_lradc_irq_name[] = { + "mxs-lradc-touchscreen", + "mxs-lradc-thresh0", + "mxs-lradc-thresh1", + "mxs-lradc-channel0", + "mxs-lradc-channel1", + "mxs-lradc-channel2", + "mxs-lradc-channel3", + "mxs-lradc-channel4", + "mxs-lradc-channel5", + "mxs-lradc-channel6", + "mxs-lradc-channel7", + "mxs-lradc-button0", + "mxs-lradc-button1", +}; + +struct mxs_lradc_chan { + uint8_t slot; + uint8_t flags; +}; + +struct mxs_lradc { + struct device *dev; + void __iomem *base; + int irq[13]; + + uint32_t *buffer; + struct iio_trigger *trig; + + struct mutex lock; + + uint8_t enable; + + struct completion completion; +}; + +#define LRADC_CTRL0 0x00 +#define LRADC_CTRL0_TOUCH_DETECT_ENABLE (1 << 23) +#define LRADC_CTRL0_TOUCH_SCREEN_TYPE (1 << 22) + +#define LRADC_CTRL1 0x10 +#define LRADC_CTRL1_LRADC_IRQ(n) (1 << (n)) +#define LRADC_CTRL1_LRADC_IRQ_MASK 0x1fff +#define LRADC_CTRL1_LRADC_IRQ_EN(n) (1 << ((n) + 16)) +#define LRADC_CTRL1_LRADC_IRQ_EN_MASK (0x1fff << 16) + +#define LRADC_CTRL2 0x20 +#define LRADC_CTRL2_TEMPSENSE_PWD (1 << 15) + +#define LRADC_CH(n) (0x50 + (0x10 * (n))) +#define LRADC_CH_ACCUMULATE (1 << 29) +#define LRADC_CH_NUM_SAMPLES_MASK (0x1f << 24) +#define LRADC_CH_NUM_SAMPLES_OFFSET 24 +#define LRADC_CH_VALUE_MASK 0x3ffff +#define LRADC_CH_VALUE_OFFSET 0 + +#define LRADC_DELAY(n) (0xd0 + (0x10 * (n))) +#define LRADC_DELAY_TRIGGER_LRADCS_MASK (0xff << 24) +#define LRADC_DELAY_TRIGGER_LRADCS_OFFSET 24 +#define LRADC_DELAY_KICK (1 << 20) +#define LRADC_DELAY_TRIGGER_DELAYS_MASK (0xf << 16) +#define LRADC_DELAY_TRIGGER_DELAYS_OFFSET 16 +#define LRADC_DELAY_LOOP_COUNT_MASK (0x1f << 11) +#define LRADC_DELAY_LOOP_COUNT_OFFSET 11 +#define LRADC_DELAY_DELAY_MASK 0x7ff +#define LRADC_DELAY_DELAY_OFFSET 0 + +#define LRADC_CTRL4 0x140 +#define LRADC_CTRL4_LRADCSELECT_MASK(n) (0xf << ((n) * 4)) +#define LRADC_CTRL4_LRADCSELECT_OFFSET(n) ((n) * 4) + +/* + * Raw I/O operations + */ +static int mxs_lradc_read_raw(struct iio_dev *iio_dev, + const struct iio_chan_spec *chan, + int *val, int *val2, long m) +{ + struct mxs_lradc *lradc = iio_priv(iio_dev); + int ret; + + if (m != IIO_CHAN_INFO_RAW) + return -EINVAL; + + /* Check for invalid channel */ + if (chan->channel > LRADC_MAX_TOTAL_CHANS) + return -EINVAL; + + /* + * See if there is no buffered operation in progess. If there is, simply + * bail out. This can be improved to support both buffered and raw IO at + * the same time, yet the code becomes horribly complicated. Therefore I + * applied KISS principle here. + */ + ret = mutex_trylock(&lradc->lock); + if (!ret) + return -EBUSY; + + INIT_COMPLETION(lradc->completion); + + /* + * No buffered operation in progress, map the channel and trigger it. + * Virtual channel 0 is always used here as the others are always not + * used if doing raw sampling. + */ + writel(LRADC_CTRL1_LRADC_IRQ_EN_MASK, + lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR); + writel(0xff, lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR); + + writel(chan->channel, lradc->base + LRADC_CTRL4); + writel(0, lradc->base + LRADC_CH(0)); + + /* Enable the IRQ and start sampling the channel. */ + writel(LRADC_CTRL1_LRADC_IRQ_EN(0), + lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_SET); + writel(1 << 0, lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_SET); + + /* Wait for completion on the channel, 1 second max. */ + ret = wait_for_completion_killable_timeout(&lradc->completion, HZ); + if (!ret) + ret = -ETIMEDOUT; + if (ret < 0) + goto err; + + /* Read the data. */ + *val = readl(lradc->base + LRADC_CH(0)) & LRADC_CH_VALUE_MASK; + ret = IIO_VAL_INT; + +err: + writel(LRADC_CTRL1_LRADC_IRQ_EN(0), + lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR); + + mutex_unlock(&lradc->lock); + + return ret; +} + +static const struct iio_info mxs_lradc_iio_info = { + .driver_module = THIS_MODULE, + .read_raw = mxs_lradc_read_raw, +}; + +/* + * IRQ Handling + */ +static irqreturn_t mxs_lradc_handle_irq(int irq, void *data) +{ + struct iio_dev *iio = data; + struct mxs_lradc *lradc = iio_priv(iio); + unsigned long reg = readl(lradc->base + LRADC_CTRL1); + + if (!(reg & LRADC_CTRL1_LRADC_IRQ_MASK)) + return IRQ_NONE; + + /* + * Touchscreen IRQ handling code shall probably have priority + * and therefore shall be placed here. + */ + + if (iio_buffer_enabled(iio)) + iio_trigger_poll(iio->trig, iio_get_time_ns()); + else if (reg & LRADC_CTRL1_LRADC_IRQ(0)) + complete(&lradc->completion); + + writel(reg & LRADC_CTRL1_LRADC_IRQ_MASK, + lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR); + + return IRQ_HANDLED; +} + +/* + * Trigger handling + */ +static irqreturn_t mxs_lradc_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *iio = pf->indio_dev; + struct mxs_lradc *lradc = iio_priv(iio); + struct iio_buffer *buffer = iio->buffer; + const uint32_t chan_value = LRADC_CH_ACCUMULATE | + ((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET); + int i, j = 0; + + for_each_set_bit(i, iio->active_scan_mask, iio->masklength) { + lradc->buffer[j] = readl(lradc->base + LRADC_CH(j)); + writel(chan_value, lradc->base + LRADC_CH(j)); + lradc->buffer[j] &= LRADC_CH_VALUE_MASK; + lradc->buffer[j] /= LRADC_DELAY_TIMER_LOOP; + j++; + } + + if (iio->scan_timestamp) { + s64 *timestamp = (s64 *)((u8 *)lradc->buffer + + ALIGN(j, sizeof(s64))); + *timestamp = pf->timestamp; + } + + iio_push_to_buffer(buffer, (u8 *)lradc->buffer, pf->timestamp); + + iio_trigger_notify_done(iio->trig); + + return IRQ_HANDLED; +} + +static int mxs_lradc_configure_trigger(struct iio_trigger *trig, bool state) +{ + struct iio_dev *iio = trig->private_data; + struct mxs_lradc *lradc = iio_priv(iio); + const uint32_t st = state ? STMP_OFFSET_REG_SET : STMP_OFFSET_REG_CLR; + + writel(LRADC_DELAY_KICK, lradc->base + LRADC_DELAY(0) + st); + + return 0; +} + +static const struct iio_trigger_ops mxs_lradc_trigger_ops = { + .owner = THIS_MODULE, + .set_trigger_state = &mxs_lradc_configure_trigger, +}; + +static int mxs_lradc_trigger_init(struct iio_dev *iio) +{ + int ret; + struct iio_trigger *trig; + + trig = iio_trigger_alloc("%s-dev%i", iio->name, iio->id); + if (trig == NULL) + return -ENOMEM; + + trig->dev.parent = iio->dev.parent; + trig->private_data = iio; + trig->ops = &mxs_lradc_trigger_ops; + + ret = iio_trigger_register(trig); + if (ret) { + iio_trigger_free(trig); + return ret; + } + + iio->trig = trig; + + return 0; +} + +static void mxs_lradc_trigger_remove(struct iio_dev *iio) +{ + iio_trigger_unregister(iio->trig); + iio_trigger_free(iio->trig); +} + +static int mxs_lradc_buffer_preenable(struct iio_dev *iio) +{ + struct mxs_lradc *lradc = iio_priv(iio); + struct iio_buffer *buffer = iio->buffer; + int ret = 0, chan, ofs = 0, enable = 0; + uint32_t ctrl4 = 0; + uint32_t ctrl1_irq = 0; + const uint32_t chan_value = LRADC_CH_ACCUMULATE | + ((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET); + const int len = bitmap_weight(buffer->scan_mask, LRADC_MAX_TOTAL_CHANS); + + if (!len) + return -EINVAL; + + /* + * Lock the driver so raw access can not be done during buffered + * operation. This simplifies the code a lot. + */ + ret = mutex_trylock(&lradc->lock); + if (!ret) + return -EBUSY; + + lradc->buffer = kmalloc(len * sizeof(*lradc->buffer), GFP_KERNEL); + if (!lradc->buffer) { + ret = -ENOMEM; + goto err_mem; + } + + ret = iio_sw_buffer_preenable(iio); + if (ret < 0) + goto err_buf; + + writel(LRADC_CTRL1_LRADC_IRQ_EN_MASK, + lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR); + writel(0xff, lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR); + + for_each_set_bit(chan, buffer->scan_mask, LRADC_MAX_TOTAL_CHANS) { + ctrl4 |= chan << LRADC_CTRL4_LRADCSELECT_OFFSET(ofs); + ctrl1_irq |= LRADC_CTRL1_LRADC_IRQ_EN(ofs); + writel(chan_value, lradc->base + LRADC_CH(ofs)); + enable |= 1 << ofs; + ofs++; + }; + + writel(LRADC_DELAY_TRIGGER_LRADCS_MASK | LRADC_DELAY_KICK, + lradc->base + LRADC_DELAY(0) + STMP_OFFSET_REG_CLR); + + writel(ctrl4, lradc->base + LRADC_CTRL4); + writel(ctrl1_irq, lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_SET); + + writel(enable << LRADC_DELAY_TRIGGER_LRADCS_OFFSET, + lradc->base + LRADC_DELAY(0) + STMP_OFFSET_REG_SET); + + return 0; + +err_buf: + kfree(lradc->buffer); +err_mem: + mutex_unlock(&lradc->lock); + return ret; +} + +static int mxs_lradc_buffer_postdisable(struct iio_dev *iio) +{ + struct mxs_lradc *lradc = iio_priv(iio); + + writel(LRADC_DELAY_TRIGGER_LRADCS_MASK | LRADC_DELAY_KICK, + lradc->base + LRADC_DELAY(0) + STMP_OFFSET_REG_CLR); + + writel(0xff, lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR); + writel(LRADC_CTRL1_LRADC_IRQ_EN_MASK, + lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR); + + kfree(lradc->buffer); + mutex_unlock(&lradc->lock); + + return 0; +} + +static bool mxs_lradc_validate_scan_mask(struct iio_dev *iio, + const unsigned long *mask) +{ + const int mw = bitmap_weight(mask, iio->masklength); + + return mw <= LRADC_MAX_MAPPED_CHANS; +} + +static const struct iio_buffer_setup_ops mxs_lradc_buffer_ops = { + .preenable = &mxs_lradc_buffer_preenable, + .postenable = &iio_triggered_buffer_postenable, + .predisable = &iio_triggered_buffer_predisable, + .postdisable = &mxs_lradc_buffer_postdisable, + .validate_scan_mask = &mxs_lradc_validate_scan_mask, +}; + +/* + * Driver initialization + */ + +#define MXS_ADC_CHAN(idx, chan_type) { \ + .type = (chan_type), \ + .indexed = 1, \ + .scan_index = (idx), \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \ + .channel = (idx), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 18, \ + .storagebits = 32, \ + }, \ +} + +static const struct iio_chan_spec mxs_lradc_chan_spec[] = { + MXS_ADC_CHAN(0, IIO_VOLTAGE), + MXS_ADC_CHAN(1, IIO_VOLTAGE), + MXS_ADC_CHAN(2, IIO_VOLTAGE), + MXS_ADC_CHAN(3, IIO_VOLTAGE), + MXS_ADC_CHAN(4, IIO_VOLTAGE), + MXS_ADC_CHAN(5, IIO_VOLTAGE), + MXS_ADC_CHAN(6, IIO_VOLTAGE), + MXS_ADC_CHAN(7, IIO_VOLTAGE), /* VBATT */ + MXS_ADC_CHAN(8, IIO_TEMP), /* Temp sense 0 */ + MXS_ADC_CHAN(9, IIO_TEMP), /* Temp sense 1 */ + MXS_ADC_CHAN(10, IIO_VOLTAGE), /* VDDIO */ + MXS_ADC_CHAN(11, IIO_VOLTAGE), /* VTH */ + MXS_ADC_CHAN(12, IIO_VOLTAGE), /* VDDA */ + MXS_ADC_CHAN(13, IIO_VOLTAGE), /* VDDD */ + MXS_ADC_CHAN(14, IIO_VOLTAGE), /* VBG */ + MXS_ADC_CHAN(15, IIO_VOLTAGE), /* VDD5V */ +}; + +static void mxs_lradc_hw_init(struct mxs_lradc *lradc) +{ + int i; + const uint32_t cfg = + (LRADC_DELAY_TIMER_PER << LRADC_DELAY_DELAY_OFFSET); + + stmp_reset_block(lradc->base); + + for (i = 0; i < LRADC_MAX_DELAY_CHANS; i++) + writel(cfg | (1 << (LRADC_DELAY_TRIGGER_DELAYS_OFFSET + i)), + lradc->base + LRADC_DELAY(i)); + + /* Start internal temperature sensing. */ + writel(0, lradc->base + LRADC_CTRL2); +} + +static void mxs_lradc_hw_stop(struct mxs_lradc *lradc) +{ + int i; + + writel(LRADC_CTRL1_LRADC_IRQ_EN_MASK, + lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR); + + for (i = 0; i < LRADC_MAX_DELAY_CHANS; i++) + writel(0, lradc->base + LRADC_DELAY(i)); +} + +static int __devinit mxs_lradc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mxs_lradc *lradc; + struct iio_dev *iio; + struct resource *iores; + int ret = 0; + int i; + + /* Allocate the IIO device. */ + iio = iio_device_alloc(sizeof(*lradc)); + if (!iio) { + dev_err(dev, "Failed to allocate IIO device\n"); + return -ENOMEM; + } + + lradc = iio_priv(iio); + + /* Grab the memory area */ + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); + lradc->dev = &pdev->dev; + lradc->base = devm_request_and_ioremap(dev, iores); + if (!lradc->base) { + ret = -EADDRNOTAVAIL; + goto err_addr; + } + + /* Grab all IRQ sources */ + for (i = 0; i < 13; i++) { + lradc->irq[i] = platform_get_irq(pdev, i); + if (lradc->irq[i] < 0) { + ret = -EINVAL; + goto err_addr; + } + + ret = devm_request_irq(dev, lradc->irq[i], + mxs_lradc_handle_irq, 0, + mxs_lradc_irq_name[i], iio); + if (ret) + goto err_addr; + } + + platform_set_drvdata(pdev, iio); + + init_completion(&lradc->completion); + mutex_init(&lradc->lock); + + iio->name = pdev->name; + iio->dev.parent = &pdev->dev; + iio->info = &mxs_lradc_iio_info; + iio->modes = INDIO_DIRECT_MODE; + iio->channels = mxs_lradc_chan_spec; + iio->num_channels = ARRAY_SIZE(mxs_lradc_chan_spec); + + ret = iio_triggered_buffer_setup(iio, &iio_pollfunc_store_time, + &mxs_lradc_trigger_handler, + &mxs_lradc_buffer_ops); + if (ret) + goto err_addr; + + ret = mxs_lradc_trigger_init(iio); + if (ret) + goto err_trig; + + /* Register IIO device. */ + ret = iio_device_register(iio); + if (ret) { + dev_err(dev, "Failed to register IIO device\n"); + goto err_dev; + } + + /* Configure the hardware. */ + mxs_lradc_hw_init(lradc); + + return 0; + +err_dev: + mxs_lradc_trigger_remove(iio); +err_trig: + iio_triggered_buffer_cleanup(iio); +err_addr: + iio_device_free(iio); + return ret; +} + +static int __devexit mxs_lradc_remove(struct platform_device *pdev) +{ + struct iio_dev *iio = platform_get_drvdata(pdev); + struct mxs_lradc *lradc = iio_priv(iio); + + mxs_lradc_hw_stop(lradc); + + iio_device_unregister(iio); + iio_triggered_buffer_cleanup(iio); + mxs_lradc_trigger_remove(iio); + iio_device_free(iio); + + return 0; +} + +static const struct of_device_id mxs_lradc_dt_ids[] = { + { .compatible = "fsl,imx28-lradc", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_lradc_dt_ids); + +static struct platform_driver mxs_lradc_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = mxs_lradc_dt_ids, + }, + .probe = mxs_lradc_probe, + .remove = __devexit_p(mxs_lradc_remove), +}; + +module_platform_driver(mxs_lradc_driver); + +MODULE_AUTHOR("Marek Vasut "); +MODULE_DESCRIPTION("Freescale i.MX28 LRADC driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3