From 714c8a061092417d3ffb1d0f0522e3d092c730dd Mon Sep 17 00:00:00 2001 From: Stas Sergeev Date: Fri, 6 Jun 2008 00:22:50 -0400 Subject: Input: pcspkr - remove negative dependency on snd-pcsp It should be possible to build pcspkr driver together with snd-pcsp, even though tehy can not be used together. Signed-off-by: Stas Sergeev Signed-off-by: Dmitry Torokhov --- drivers/input/misc/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 3ad8bd9f7543..432699d61c58 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -15,7 +15,6 @@ if INPUT_MISC config INPUT_PCSPKR tristate "PC Speaker support" depends on PCSPKR_PLATFORM - depends on SND_PCSP=n help Say Y here if you want the standard PC Speaker to be used for bells and whistles. -- cgit v1.2.3 From efd5184646d5d400fc538d093e9a0bec22a75551 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 6 Jun 2008 00:56:43 -0400 Subject: Input: i8042 - add Fujitsu-Siemens Amilo Pro V2030 to nomux table Fujitsu Siemens Amilo Pro V2030 needs nomux table entry, in addition to already existing entry for V2010 model (note that Fujitsu-Siemens changed the capitalization in the DMI data for product). Tested-by: Jiri Mleziva Signed-off-by: Jiri Kosina Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 9aafa96cb746..78eb7841174c 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -192,6 +192,13 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pro V2010"), }, }, + { + .ident = "Fujitsu-Siemens Amilo Pro 2030", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"), + }, + }, { /* * No data is coming from the touchscreen unless KBC -- cgit v1.2.3 From c4ea896476d30514109f61f1a6e0d8e2b201e401 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 3 Jun 2008 13:36:19 -0500 Subject: [POWERPC] 85xx: MPC85xx MDS - Unconditionally select PHYLIB for board fixups The MPC85xx MDS board requires some board level tweaks of the PHYs that either the eTSEC (gianfar) or UCC ethernet controllers are connected to. Its possible to build the phylib as a module, however this breaks the board level fix ups because phy_read and phy_write are not available if we build as a module. So we unconditionally select PHYLIB to ensure its built into the kernel if we are building in MPC85xx MDS support. This was determined to be the easiest soultion even though it prevents the user from removing PHYLIB support if they decide they don't want it. Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 7ff29d53dc2d..ecbe580c3f32 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -34,6 +34,7 @@ config MPC85xx_MDS bool "Freescale MPC85xx MDS" select DEFAULT_UIMAGE select QUICC_ENGINE + select PHYLIB help This option enables support for the MPC85xx MDS board -- cgit v1.2.3 From ad16880daae42b4e8e078580812faa216600b05e Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 6 Jun 2008 10:35:13 -0500 Subject: [POWERPC] 85xx: MPC8548CDS - Fix size of PCIe IO space Andrew Klossner pointed out the IO space size was in violation of the alignment requirements for windows on the 85xx. The size should have been 1M (to match u-boot). Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8548cds.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index fa298a8c81cc..4811b8107415 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -409,7 +409,7 @@ interrupts = <26 2>; bus-range = <0 255>; ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xe3000000 0x0 0x8000000>; + 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>; clock-frequency = <33333333>; #interrupt-cells = <1>; #size-cells = <2>; @@ -428,7 +428,7 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 - 0x0 0x8000000>; + 0x0 0x100000>; }; }; }; -- cgit v1.2.3 From a1072b2597752eafca77a664a1816faf7a43bac8 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 20 May 2008 15:14:18 -0500 Subject: [POWERPC] 8610: Update defconfig for MPC8610 HPCD Update the defconfig for the Freescale MPC8610 HPCD board. Enable module support. Disable support for all NICs except for the on-board ULI526x. Enable support for the Freescale DIU driver. Increase the maximum zone order to 12, so that the DIU driver can allocate physically-contiguous 5MB buffers. Enable SYSV IPC and OSS plugin support, which are needed for some OSS apps. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc8610_hpcd_defconfig | 316 ++++++++++++++++------------ 1 file changed, 180 insertions(+), 136 deletions(-) diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/mpc8610_hpcd_defconfig index 7e5b9ce58d89..5612d40d0463 100644 --- a/arch/powerpc/configs/mpc8610_hpcd_defconfig +++ b/arch/powerpc/configs/mpc8610_hpcd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:33 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:50:24 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -60,9 +62,10 @@ CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set -# CONFIG_SYSVIPC is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set @@ -86,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_EXTRA_PASS=y @@ -110,14 +114,22 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_MODULES is not set +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set @@ -151,6 +163,7 @@ CONFIG_PPC_86xx=y # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_MPC8641_HPCN is not set +# CONFIG_SBC8641D is not set CONFIG_MPC8610_HPCD=y CONFIG_MPC8610=y # CONFIG_IPIC is not set @@ -199,11 +212,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=12 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -223,12 +238,14 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y CONFIG_PCI_DEBUG=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -238,11 +255,11 @@ CONFIG_PCI_DEBUG=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -303,8 +320,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -446,6 +465,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -504,6 +524,7 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -553,7 +574,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -563,13 +588,11 @@ CONFIG_SATA_AHCI=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_FSL is not set CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -609,6 +632,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -628,25 +652,9 @@ CONFIG_DUMMY=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=y +# CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -663,64 +671,10 @@ CONFIG_ULI526X=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_NET_PCI is not set # CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -CONFIG_8139TOO=y -CONFIG_8139TOO_PIO=y -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set -# CONFIG_R6040 is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_SC92031 is not set -CONFIG_NETDEV_1000=y -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set -# CONFIG_IP1000 is not set -# CONFIG_IGB is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_GIANFAR is not set -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set -# CONFIG_IXGBE is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_NIU is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_TEHUTI is not set -# CONFIG_BNX2X is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # @@ -728,6 +682,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -783,6 +738,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -823,13 +779,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -852,9 +801,11 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -864,19 +815,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -893,12 +838,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -908,7 +863,56 @@ CONFIG_DAB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_FB is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_OF is not set +# CONFIG_FB_CT65550 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +CONFIG_FB_FSL_DIU=y +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -922,6 +926,8 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set # # Sound @@ -938,7 +944,7 @@ CONFIG_SND_PCM=y CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y -# CONFIG_SND_PCM_OSS_PLUGINS is not set +CONFIG_SND_PCM_OSS_PLUGINS=y # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_VERBOSE_PROCFS=y @@ -965,6 +971,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set @@ -1030,15 +1037,15 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_SOC=y -# -# SoC Audio support for SuperH -# - # # ALSA SoC audio for Freescale SOCs # CONFIG_SND_SOC_MPC8610=y CONFIG_SND_SOC_MPC8610_HPCD=y + +# +# SoC Audio for the Texas Instruments OMAP +# CONFIG_SND_SOC_CS4270=y CONFIG_SND_SOC_CS4270_VD33_ERRATA=y @@ -1055,6 +1062,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1063,14 +1072,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1090,7 +1096,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set @@ -1134,6 +1139,7 @@ CONFIG_TMPFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set @@ -1147,10 +1153,9 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set -CONFIG_NFSD_TCP=y +# CONFIG_NFSD_V4 is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1234,6 +1239,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1244,6 +1250,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1251,6 +1258,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1261,6 +1269,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1274,9 +1283,11 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set @@ -1284,6 +1295,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1294,48 +1306,80 @@ CONFIG_DEBUG_INFO=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set -- cgit v1.2.3 From 70b3ec3e523fc2370117c0eaf5be80859848f66a Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 9 Jun 2008 08:53:39 -0500 Subject: [POWERPC] Updated Freescale PPC defconfigs Signed-off-by: Kumar Gala --- arch/powerpc/configs/83xx/mpc8313_rdb_defconfig | 155 ++++++++++----- arch/powerpc/configs/83xx/mpc8315_rdb_defconfig | 162 +++++++++------ arch/powerpc/configs/83xx/mpc832x_mds_defconfig | 146 +++++++++----- arch/powerpc/configs/83xx/mpc832x_rdb_defconfig | 150 +++++++++----- arch/powerpc/configs/83xx/mpc834x_itx_defconfig | 157 +++++++++------ arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig | 150 +++++++++----- arch/powerpc/configs/83xx/mpc834x_mds_defconfig | 146 +++++++++----- arch/powerpc/configs/83xx/mpc836x_mds_defconfig | 146 +++++++++----- arch/powerpc/configs/83xx/mpc837x_mds_defconfig | 146 +++++++++----- arch/powerpc/configs/83xx/mpc837x_rdb_defconfig | 222 ++++++++++++++++----- arch/powerpc/configs/83xx/sbc834x_defconfig | 140 ++++++++----- arch/powerpc/configs/85xx/ksi8560_defconfig | 168 ++++++++++------ arch/powerpc/configs/85xx/mpc8540_ads_defconfig | 133 +++++++++---- arch/powerpc/configs/85xx/mpc8544_ds_defconfig | 210 +++++++++++++------- arch/powerpc/configs/85xx/mpc8560_ads_defconfig | 135 ++++++++----- arch/powerpc/configs/85xx/mpc8568mds_defconfig | 150 +++++++++----- arch/powerpc/configs/85xx/mpc8572_ds_defconfig | 210 +++++++++++++------- arch/powerpc/configs/85xx/mpc85xx_cds_defconfig | 137 ++++++++----- arch/powerpc/configs/85xx/sbc8548_defconfig | 131 +++++++----- arch/powerpc/configs/85xx/sbc8560_defconfig | 135 ++++++++----- arch/powerpc/configs/85xx/stx_gp3_defconfig | 152 ++++++++------ arch/powerpc/configs/85xx/tqm8540_defconfig | 147 +++++++++----- arch/powerpc/configs/85xx/tqm8541_defconfig | 146 +++++++++----- arch/powerpc/configs/85xx/tqm8555_defconfig | 146 +++++++++----- arch/powerpc/configs/85xx/tqm8560_defconfig | 146 +++++++++----- arch/powerpc/configs/adder875_defconfig | 52 +++-- arch/powerpc/configs/ep8248e_defconfig | 124 ++++++++---- arch/powerpc/configs/ep88xc_defconfig | 47 +++-- arch/powerpc/configs/linkstation_defconfig | 172 ++++++++++------ arch/powerpc/configs/mpc7448_hpc2_defconfig | 136 ++++++++----- arch/powerpc/configs/mpc8272_ads_defconfig | 126 ++++++++---- arch/powerpc/configs/mpc83xx_defconfig | 151 +++++++++----- arch/powerpc/configs/mpc85xx_defconfig | 230 +++++++++++++++------- arch/powerpc/configs/mpc8641_hpcn_defconfig | 210 +++++++++++++------- arch/powerpc/configs/mpc866_ads_defconfig | 128 ++++++++---- arch/powerpc/configs/mpc885_ads_defconfig | 47 +++-- arch/powerpc/configs/pq2fads_defconfig | 133 +++++++++---- arch/powerpc/configs/prpmc2800_defconfig | 153 ++++++++------ arch/powerpc/configs/sbc8641d_defconfig | 150 +++++++++----- arch/powerpc/configs/storcenter_defconfig | 71 ++++--- 40 files changed, 3796 insertions(+), 2000 deletions(-) diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index 7d18440e398f..5428f9f5ed85 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Fri Apr 11 11:10:09 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:21 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -196,7 +201,6 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -211,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -239,6 +245,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -248,11 +255,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -300,8 +307,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -362,6 +367,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -445,6 +451,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -641,7 +648,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -661,6 +667,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -668,6 +675,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -724,6 +732,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -751,7 +760,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -761,13 +769,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -795,6 +796,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -804,17 +806,12 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -919,12 +916,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -977,16 +984,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -1004,6 +1015,7 @@ CONFIG_USB_UHCI_HCD=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1023,7 +1035,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1061,6 +1075,7 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set @@ -1072,6 +1087,7 @@ CONFIG_USB_GADGET_NET2280=y CONFIG_USB_NET2280=y # CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set @@ -1090,6 +1106,7 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1144,11 +1161,8 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1168,7 +1182,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1237,7 +1250,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1282,6 +1294,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1302,6 +1315,7 @@ CONFIG_HAVE_LMB=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1312,6 +1326,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1324,6 +1339,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1335,6 +1351,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1345,51 +1362,81 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index 1f57456dd81e..9bc3a03ae264 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:15 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:21 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -210,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -238,6 +245,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -247,11 +255,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -299,8 +307,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -361,6 +367,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -444,6 +451,7 @@ CONFIG_MTD_NAND_IDS=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -549,7 +557,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_SATA_FSL=y +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -559,13 +571,11 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -CONFIG_SATA_FSL=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -605,6 +615,7 @@ CONFIG_SATA_FSL=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y @@ -698,7 +709,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -718,6 +728,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -725,6 +736,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -781,6 +793,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -808,7 +821,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -818,13 +830,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -852,6 +857,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -861,17 +867,12 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -976,12 +977,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1034,16 +1045,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -1061,6 +1076,7 @@ CONFIG_USB_UHCI_HCD=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1080,7 +1096,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1118,6 +1136,7 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set @@ -1129,6 +1148,7 @@ CONFIG_USB_GADGET_NET2280=y CONFIG_USB_NET2280=y # CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set @@ -1147,6 +1167,7 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1201,11 +1222,8 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1225,7 +1243,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1294,7 +1311,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1339,6 +1355,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1351,6 +1368,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1358,6 +1376,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1368,6 +1387,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1380,6 +1400,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1391,6 +1412,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1401,51 +1423,81 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig index 50cceda8994f..1eca26f3659a 100644 --- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:36:51 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:22 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -212,11 +217,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -239,6 +246,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -248,11 +256,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -300,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -355,6 +361,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -522,7 +529,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -546,6 +552,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -553,6 +560,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -600,6 +608,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -628,7 +637,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -638,13 +646,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -671,6 +672,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -680,19 +682,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -775,12 +771,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -811,6 +817,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -819,6 +827,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -870,11 +879,8 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -894,7 +900,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -952,7 +957,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -995,6 +999,7 @@ CONFIG_UCC=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1005,6 +1010,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1012,6 +1018,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1021,6 +1028,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1030,52 +1038,82 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index ac913025713e..de95d327463c 100644 --- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:16 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:24 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -212,11 +217,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -239,6 +246,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -248,11 +256,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -300,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -355,6 +361,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -526,7 +533,6 @@ CONFIG_E1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -550,6 +556,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -557,6 +564,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -613,6 +621,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -652,13 +661,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -686,6 +688,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -695,17 +698,12 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -809,12 +807,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -867,16 +875,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -894,6 +906,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -913,7 +926,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -951,6 +966,7 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set @@ -962,6 +978,7 @@ CONFIG_MMC=y CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # # MMC/SD Host Controller Drivers @@ -972,14 +989,11 @@ CONFIG_MMC_BLOCK_BOUNCE=y CONFIG_MMC_SPI=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -999,7 +1013,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1060,7 +1073,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1147,6 +1159,7 @@ CONFIG_UCC=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_ITU_T=y @@ -1157,6 +1170,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1164,6 +1178,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1173,6 +1188,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1182,52 +1198,82 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index e1de399a7bdd..b47fc9185708 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:17 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:25 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -210,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -237,6 +244,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -246,11 +254,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -432,6 +438,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -541,7 +548,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -551,13 +562,11 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set CONFIG_SATA_SIL=y -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_FSL is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -598,6 +607,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y CONFIG_PATA_OF_PLATFORM=y +# CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y @@ -659,7 +669,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -679,6 +688,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -686,6 +696,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -722,6 +733,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -749,7 +761,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -759,13 +770,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -793,6 +797,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -802,17 +807,12 @@ CONFIG_I2C_MPC=y CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -862,12 +862,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -905,16 +915,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -925,6 +939,7 @@ CONFIG_USB_UHCI_HCD=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -945,6 +960,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -982,10 +998,12 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1040,11 +1058,8 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1064,7 +1079,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1126,7 +1140,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1210,6 +1223,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1220,6 +1234,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1227,6 +1242,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1236,6 +1252,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1245,51 +1262,81 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig index b4e39cf82a8c..fdac4845bad9 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:18 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:26 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -210,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -237,6 +244,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -246,11 +254,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -432,6 +438,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -587,7 +594,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -607,6 +613,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -614,6 +621,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -650,6 +658,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -677,7 +686,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -687,13 +695,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -721,6 +722,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -730,17 +732,12 @@ CONFIG_I2C_MPC=y CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -790,12 +787,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -833,16 +840,20 @@ CONFIG_USB=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -853,6 +864,7 @@ CONFIG_USB_UHCI_HCD=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -873,6 +885,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -909,10 +922,12 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -967,11 +982,8 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -991,7 +1003,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1053,7 +1064,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1137,6 +1147,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1147,6 +1158,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1154,6 +1166,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1163,6 +1176,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1172,51 +1186,81 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig index b4e82c0e2be7..c82e96e984fc 100644 --- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:36:56 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:26 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -210,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -237,6 +244,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -246,11 +254,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -353,6 +359,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -471,7 +478,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -491,6 +497,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -498,6 +505,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -544,6 +552,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -571,7 +580,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -581,13 +589,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -614,6 +615,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -623,19 +625,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -718,12 +714,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -754,6 +760,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -762,6 +770,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -813,11 +822,8 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -837,7 +843,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -895,7 +900,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -936,6 +940,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -946,6 +951,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -953,6 +959,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -962,6 +969,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -971,51 +979,81 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig index d50a96eddcdc..20fd9f58cf42 100644 --- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:36:57 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:27 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -210,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -237,6 +244,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -246,11 +254,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -353,6 +359,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -520,7 +527,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -544,6 +550,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -551,6 +558,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -598,6 +606,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -626,7 +635,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -636,13 +644,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -669,6 +670,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -678,19 +680,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -773,12 +769,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -809,6 +815,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -817,6 +825,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -868,11 +877,8 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -892,7 +898,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -950,7 +955,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -993,6 +997,7 @@ CONFIG_UCC=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1003,6 +1008,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1010,6 +1016,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1019,6 +1026,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1028,52 +1036,82 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig index f377cde785b0..0f94d9f56beb 100644 --- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:23 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:28 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -111,12 +114,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -211,11 +216,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -234,6 +241,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -243,11 +251,11 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -295,8 +303,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -350,6 +356,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -411,8 +418,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set -# CONFIG_SATA_MV is not set +CONFIG_SATA_PMP=y CONFIG_SATA_FSL=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set # CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set @@ -459,6 +468,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -503,6 +513,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -536,13 +547,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -552,6 +556,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -561,19 +566,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -646,12 +645,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -680,6 +689,8 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -688,13 +699,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -714,7 +722,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -772,7 +779,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -817,6 +823,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -827,6 +834,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -834,6 +842,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -841,6 +850,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -850,50 +860,80 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index a6331769d88f..7c1c7fa4b3f5 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:24 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:29 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -111,12 +114,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -211,11 +216,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -234,6 +241,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -243,11 +251,11 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -290,8 +298,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -345,6 +351,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -352,6 +359,7 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 @@ -406,8 +414,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set -# CONFIG_SATA_MV is not set +CONFIG_SATA_PMP=y CONFIG_SATA_FSL=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set # CONFIG_PATA_PLATFORM is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y @@ -464,6 +474,16 @@ CONFIG_GFAR_NAPI=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -508,6 +528,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -541,13 +562,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -557,6 +571,8 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -566,19 +582,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -641,6 +651,11 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set CONFIG_83xx_WDT=y +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + # # Sonics Silicon Backplane # @@ -651,13 +666,24 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -680,6 +706,14 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -695,33 +729,83 @@ CONFIG_USB=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -741,7 +825,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -799,7 +882,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -844,6 +926,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -854,6 +937,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -861,6 +945,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -868,6 +953,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -881,50 +967,80 @@ CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index 1f1518229f6d..1752918be2c1 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:38 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:30 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -109,12 +112,14 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -209,11 +214,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -232,6 +239,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -241,11 +249,11 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -293,8 +301,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -348,6 +354,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -420,6 +427,7 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -464,6 +472,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -497,13 +506,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -513,6 +515,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -522,19 +525,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -607,12 +604,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -640,13 +647,10 @@ CONFIG_HID=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -659,7 +663,6 @@ CONFIG_HID=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -717,7 +720,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -746,6 +748,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -756,6 +759,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -763,6 +767,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -770,6 +775,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -779,50 +785,80 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig index 2d0debcefdbf..b82bb042308a 100644 --- a/arch/powerpc/configs/85xx/ksi8560_defconfig +++ b/arch/powerpc/configs/85xx/ksi8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24 -# Mon Feb 11 16:25:19 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:30 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -68,23 +70,22 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -92,6 +93,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -109,6 +111,8 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -134,7 +138,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # Platform support @@ -191,12 +194,13 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -207,16 +211,17 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set # CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y CONFIG_ISA_DMA_API=y # @@ -229,6 +234,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -238,11 +244,12 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -290,8 +297,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -351,6 +356,8 @@ CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -430,17 +437,19 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_IDEDISK is not set @@ -457,7 +466,7 @@ CONFIG_IDE_PROC_FS=y CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set # CONFIG_BLK_DEV_IDEDMA is not set -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -517,6 +526,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -561,6 +571,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -594,12 +605,7 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -615,6 +621,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -627,12 +634,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -660,19 +677,20 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -693,14 +711,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -743,15 +758,16 @@ CONFIG_TMPFS=y # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -790,6 +806,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -800,6 +817,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -807,6 +825,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -817,7 +836,9 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -829,9 +850,9 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set @@ -841,6 +862,7 @@ CONFIG_FORCED_INLINING=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -852,48 +874,78 @@ CONFIG_FORCED_INLINING=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig index b998539da86e..f33fd516fd54 100644 --- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:25 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:31 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -113,6 +116,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -153,6 +157,7 @@ CONFIG_MPC8540_ADS=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -208,11 +213,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -229,6 +236,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -238,11 +246,12 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -290,8 +299,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -419,6 +426,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -463,6 +471,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -494,12 +503,7 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -528,12 +532,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -561,6 +575,8 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -569,13 +585,10 @@ CONFIG_USB_SUPPORT=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -595,7 +608,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -652,7 +664,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -691,6 +702,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -701,6 +713,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -708,6 +721,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -718,6 +732,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -730,6 +745,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -740,6 +756,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -750,47 +767,77 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig index a9f113b243ae..042a85ea7b72 100644 --- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:37:03 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:32 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -117,12 +120,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -203,7 +208,6 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m -CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -219,11 +223,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -248,6 +254,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -257,11 +264,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -332,8 +340,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -395,6 +405,7 @@ CONFIG_FW_LOADER=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -501,7 +512,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -511,13 +526,11 @@ CONFIG_SATA_AHCI=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_FSL is not set CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -557,6 +570,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -622,7 +636,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -642,6 +655,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -649,6 +663,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -713,6 +728,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -744,7 +760,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -754,13 +769,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -788,6 +796,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -797,19 +806,13 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -826,13 +829,33 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set CONFIG_DVB_CORE=m -# CONFIG_DVB_CORE_ATTACH is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m CONFIG_DVB_CAPTURE_DRIVERS=y # @@ -875,14 +898,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # DVB-S (satellite) frontends # -# CONFIG_DVB_STV0299 is not set # CONFIG_DVB_CX24110 is not set # CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_MT312 is not set -# CONFIG_DVB_VES1X93 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0299 is not set +# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_VES1X93 is not set +# CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_TDA826X is not set +# CONFIG_DVB_TUA6100 is not set # # DVB-T (terrestrial) frontends @@ -900,6 +926,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_DIB3000MC is not set # CONFIG_DVB_DIB7000M is not set # CONFIG_DVB_DIB7000P is not set +# CONFIG_DVB_TDA10048 is not set # # DVB-C (cable) frontends @@ -918,27 +945,21 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set # CONFIG_DVB_S5H1409 is not set +# CONFIG_DVB_AU8522 is not set +# CONFIG_DVB_S5H1411 is not set # -# Tuners/PLL support +# Digital terrestrial only tuners/PLL # # CONFIG_DVB_PLL is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TDA827X is not set -# CONFIG_DVB_TDA18271 is not set -# CONFIG_DVB_TUNER_QT1010 is not set -# CONFIG_DVB_TUNER_MT2060 is not set -# CONFIG_DVB_TUNER_MT2266 is not set -# CONFIG_DVB_TUNER_MT2131 is not set # CONFIG_DVB_TUNER_DIB0070 is not set -# CONFIG_DVB_TUNER_XC5000 is not set # -# Miscellaneous devices +# SEC control devices for DVB-S # # CONFIG_DVB_LNBP21 is not set +# CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_TUA6100 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1005,6 +1026,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set @@ -1079,11 +1101,11 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_SOC is not set # -# SoC Audio support for SuperH +# ALSA SoC audio for Freescale SOCs # # -# ALSA SoC audio for Freescale SOCs +# SoC Audio for the Texas Instruments OMAP # # @@ -1118,16 +1140,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -1145,6 +1171,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1164,7 +1191,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1202,10 +1231,12 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1257,23 +1288,19 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set CONFIG_DMADEVICES=y # # DMA Devices # CONFIG_FSL_DMA=y -# CONFIG_FSL_DMA_SELFTEST is not set CONFIG_DMA_ENGINE=y # # DMA Clients # # CONFIG_NET_DMA is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1293,7 +1320,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1363,10 +1389,9 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set -CONFIG_NFSD_TCP=y +# CONFIG_NFSD_V4 is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1450,9 +1475,10 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m @@ -1469,6 +1495,7 @@ CONFIG_HAVE_LMB=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1479,6 +1506,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1492,6 +1520,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1503,6 +1532,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1513,52 +1543,82 @@ CONFIG_DEBUG_INFO=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig index 851ac9115617..e19592b42043 100644 --- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:27 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:33 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -113,6 +116,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -153,6 +157,7 @@ CONFIG_MPC8560_ADS=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -210,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -238,6 +245,7 @@ CONFIG_PCI_LEGACY=y CONFIG_PCI_DEBUG=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -247,11 +255,12 @@ CONFIG_PCI_DEBUG=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -299,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -462,7 +469,6 @@ CONFIG_E1000_NAPI=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -482,6 +488,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -489,6 +496,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -535,6 +543,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -572,12 +581,7 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -610,12 +614,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -646,6 +660,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -654,14 +670,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -681,7 +694,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -738,7 +750,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -777,6 +788,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -787,6 +799,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -794,6 +807,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -804,6 +818,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -816,6 +831,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -827,6 +843,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -837,49 +854,79 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig index 2b866b385607..28004e93aeee 100644 --- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:37:05 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:34 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -111,12 +114,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -156,6 +161,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set CONFIG_MPC85xx_MDS=y # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -212,11 +218,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -240,6 +248,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -249,11 +258,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -301,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -358,6 +366,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -525,7 +534,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -546,6 +554,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -553,6 +562,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -600,6 +610,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -629,7 +640,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -639,13 +649,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -672,6 +675,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -681,19 +685,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -776,12 +774,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -812,6 +820,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -820,6 +830,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -871,11 +882,8 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -895,7 +903,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -953,7 +960,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -994,6 +1000,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1004,6 +1011,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1011,6 +1019,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1021,6 +1030,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1033,6 +1043,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1045,6 +1056,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_DEBUGGER=y # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set CONFIG_PPC_EARLY_DEBUG=y # CONFIG_PPC_EARLY_DEBUG_LPAR is not set @@ -1066,52 +1078,82 @@ CONFIG_PPC_EARLY_DEBUG=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig index 53aa6f3173a5..03627cfebcb4 100644 --- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:37:06 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:35 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -117,12 +120,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -162,6 +167,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set CONFIG_MPC85xx_DS=y +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -217,11 +223,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -246,6 +254,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -255,11 +264,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -330,8 +340,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -393,6 +405,7 @@ CONFIG_FW_LOADER=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -499,7 +512,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -509,13 +526,11 @@ CONFIG_SATA_AHCI=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_FSL is not set CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -555,6 +570,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -620,7 +636,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -640,6 +655,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -647,6 +663,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -711,6 +728,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -742,7 +760,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -752,13 +769,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -786,6 +796,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -795,19 +806,13 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -824,13 +829,33 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set CONFIG_DVB_CORE=m -# CONFIG_DVB_CORE_ATTACH is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m CONFIG_DVB_CAPTURE_DRIVERS=y # @@ -873,14 +898,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # DVB-S (satellite) frontends # -# CONFIG_DVB_STV0299 is not set # CONFIG_DVB_CX24110 is not set # CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_MT312 is not set -# CONFIG_DVB_VES1X93 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0299 is not set +# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_VES1X93 is not set +# CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_TDA826X is not set +# CONFIG_DVB_TUA6100 is not set # # DVB-T (terrestrial) frontends @@ -898,6 +926,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_DIB3000MC is not set # CONFIG_DVB_DIB7000M is not set # CONFIG_DVB_DIB7000P is not set +# CONFIG_DVB_TDA10048 is not set # # DVB-C (cable) frontends @@ -916,27 +945,21 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set # CONFIG_DVB_S5H1409 is not set +# CONFIG_DVB_AU8522 is not set +# CONFIG_DVB_S5H1411 is not set # -# Tuners/PLL support +# Digital terrestrial only tuners/PLL # # CONFIG_DVB_PLL is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TDA827X is not set -# CONFIG_DVB_TDA18271 is not set -# CONFIG_DVB_TUNER_QT1010 is not set -# CONFIG_DVB_TUNER_MT2060 is not set -# CONFIG_DVB_TUNER_MT2266 is not set -# CONFIG_DVB_TUNER_MT2131 is not set # CONFIG_DVB_TUNER_DIB0070 is not set -# CONFIG_DVB_TUNER_XC5000 is not set # -# Miscellaneous devices +# SEC control devices for DVB-S # # CONFIG_DVB_LNBP21 is not set +# CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_TUA6100 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1003,6 +1026,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set @@ -1077,11 +1101,11 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_SOC is not set # -# SoC Audio support for SuperH +# ALSA SoC audio for Freescale SOCs # # -# ALSA SoC audio for Freescale SOCs +# SoC Audio for the Texas Instruments OMAP # # @@ -1116,16 +1140,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -1143,6 +1171,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1162,7 +1191,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1200,10 +1231,12 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1255,11 +1288,8 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1279,7 +1309,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1349,10 +1378,9 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set -CONFIG_NFSD_TCP=y +# CONFIG_NFSD_V4 is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1436,9 +1464,10 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m @@ -1447,6 +1476,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1454,6 +1484,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1464,6 +1495,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1477,6 +1509,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1488,6 +1521,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1498,52 +1532,82 @@ CONFIG_DEBUG_INFO=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig index a469fe918816..b09f0032a10b 100644 --- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig +++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:30 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:36 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -113,6 +116,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -153,6 +157,7 @@ CONFIG_MPC85xx=y CONFIG_MPC85xx_CDS=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -208,11 +213,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -236,6 +243,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -245,11 +253,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -297,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -437,7 +444,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -515,7 +522,6 @@ CONFIG_E1000_NAPI=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -535,6 +541,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -542,6 +549,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -588,6 +596,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -624,12 +633,7 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -662,12 +666,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -698,6 +712,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -706,14 +722,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -733,7 +746,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -790,7 +802,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -829,6 +840,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -839,6 +851,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -846,6 +859,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -856,6 +870,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -868,6 +883,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -878,6 +894,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -888,48 +905,78 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig index 67f67978c742..24f7f44b4821 100644 --- a/arch/powerpc/configs/85xx/sbc8548_defconfig +++ b/arch/powerpc/configs/85xx/sbc8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:39 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:37 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -111,6 +114,7 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -151,6 +155,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -206,11 +211,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -233,6 +240,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -242,11 +250,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -294,8 +303,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -449,7 +456,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -469,6 +475,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -476,6 +483,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -522,6 +530,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -558,12 +567,7 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -596,12 +600,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -628,14 +642,11 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -648,7 +659,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -705,7 +715,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -732,6 +741,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -742,6 +752,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -749,6 +760,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -756,6 +768,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -765,48 +778,78 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig index fef605579e29..655518dcd73f 100644 --- a/arch/powerpc/configs/85xx/sbc8560_defconfig +++ b/arch/powerpc/configs/85xx/sbc8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:39 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:38 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -112,6 +115,7 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -152,6 +156,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -207,11 +212,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -228,6 +235,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -237,11 +245,12 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -289,8 +298,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -418,6 +425,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -462,6 +470,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -487,17 +496,11 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -526,12 +529,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -559,6 +572,8 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -567,6 +582,7 @@ CONFIG_USB_SUPPORT=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -602,11 +618,8 @@ CONFIG_RTC_DRV_M48T59=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -619,7 +632,6 @@ CONFIG_RTC_DRV_M48T59=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -676,7 +688,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -715,6 +726,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -725,6 +737,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -732,6 +745,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -742,6 +756,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -753,6 +768,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -763,6 +779,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set CONFIG_PPC_EARLY_DEBUG=y # CONFIG_PPC_EARLY_DEBUG_LPAR is not set @@ -784,47 +801,77 @@ CONFIG_PPC_EARLY_DEBUG=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig index 1d303c49bb0c..7804ca1ecc94 100644 --- a/arch/powerpc/configs/85xx/stx_gp3_defconfig +++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:42 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:38 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -114,12 +117,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set @@ -158,6 +163,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set CONFIG_STX_GP3=y # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -215,11 +221,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -243,6 +251,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -252,11 +261,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -304,8 +314,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -418,6 +426,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=m CONFIG_PARPORT=m CONFIG_PARPORT_PC=m # CONFIG_PARPORT_PC_FIFO is not set @@ -505,7 +514,7 @@ CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_BLK_DEV_IDEDMA is not set -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -653,7 +662,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -673,6 +681,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -680,6 +689,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -753,6 +763,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -795,13 +806,6 @@ CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=m -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -829,6 +833,7 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -838,19 +843,13 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -920,12 +919,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -973,6 +982,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -981,15 +992,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1009,7 +1017,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1073,7 +1080,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1141,9 +1147,10 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set @@ -1152,6 +1159,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1159,6 +1167,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1169,6 +1178,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1182,6 +1192,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1194,6 +1205,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -1204,50 +1216,80 @@ CONFIG_BDI_SWITCH=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig index d39ee3b35bfc..e0b5559e84aa 100644 --- a/arch/powerpc/configs/85xx/tqm8540_defconfig +++ b/arch/powerpc/configs/85xx/tqm8540_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:43 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:39 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y @@ -111,6 +114,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -151,6 +155,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set CONFIG_TQM8540=y # CONFIG_TQM8541 is not set @@ -171,7 +176,6 @@ CONFIG_MPIC=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_CPM2 is not set -CONFIG_PPC_CPM_NEW_BINDING=y # CONFIG_FSL_ULI1575 is not set # @@ -208,11 +212,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -233,6 +239,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -242,11 +249,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -294,8 +302,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -352,6 +358,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -423,6 +430,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -506,7 +514,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -600,7 +608,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -620,6 +627,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -627,6 +635,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -673,6 +682,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -712,13 +722,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -744,6 +747,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -753,19 +757,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -835,12 +833,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -871,6 +879,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -879,14 +889,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -906,7 +913,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -974,7 +980,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1013,6 +1018,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1025,6 +1031,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1032,6 +1039,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1041,6 +1049,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1050,48 +1059,78 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig index cbf6ad2d71da..6f9067b49e07 100644 --- a/arch/powerpc/configs/85xx/tqm8541_defconfig +++ b/arch/powerpc/configs/85xx/tqm8541_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:44 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:40 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y @@ -111,6 +114,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -151,6 +155,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set CONFIG_TQM8541=y @@ -209,11 +214,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -234,6 +241,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -243,11 +251,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -295,8 +304,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -353,6 +360,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -424,6 +432,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -507,7 +516,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -602,7 +611,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -622,6 +630,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -629,6 +638,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -675,6 +685,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -722,13 +733,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -754,6 +758,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -763,19 +768,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -845,12 +844,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -881,6 +890,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -889,14 +900,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -916,7 +924,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -984,7 +991,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1023,6 +1029,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1035,6 +1042,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1042,6 +1050,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1052,6 +1061,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1061,49 +1071,79 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig index bbff962c8472..03120b5b52fa 100644 --- a/arch/powerpc/configs/85xx/tqm8555_defconfig +++ b/arch/powerpc/configs/85xx/tqm8555_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:44 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:41 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y @@ -111,6 +114,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -151,6 +155,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -209,11 +214,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -234,6 +241,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -243,11 +251,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -295,8 +304,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -353,6 +360,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -424,6 +432,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -507,7 +516,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -602,7 +611,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -622,6 +630,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -629,6 +638,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -675,6 +685,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -722,13 +733,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -754,6 +758,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -763,19 +768,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -845,12 +844,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -881,6 +890,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -889,14 +900,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -916,7 +924,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -984,7 +991,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1023,6 +1029,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1035,6 +1042,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1042,6 +1050,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1052,6 +1061,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1061,49 +1071,79 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig index 63c5ec8b6515..3113257edf5a 100644 --- a/arch/powerpc/configs/85xx/tqm8560_defconfig +++ b/arch/powerpc/configs/85xx/tqm8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:45 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:42 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y @@ -111,6 +114,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -151,6 +155,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -209,11 +214,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -234,6 +241,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -243,11 +251,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -295,8 +304,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -353,6 +360,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -424,6 +432,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -507,7 +516,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -602,7 +611,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -622,6 +630,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -629,6 +638,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -675,6 +685,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -722,13 +733,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -754,6 +758,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -763,19 +768,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -845,12 +844,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -881,6 +890,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -889,14 +900,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -916,7 +924,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -984,7 +991,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1023,6 +1029,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1035,6 +1042,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1042,6 +1050,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1052,6 +1061,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1061,49 +1071,79 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig index a3cc94a2ff06..6740f2a3aa3d 100644 --- a/arch/powerpc/configs/adder875_defconfig +++ b/arch/powerpc/configs/adder875_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Wed Feb 20 12:26:07 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:08 2008 # # CONFIG_PPC64 is not set @@ -28,6 +28,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -75,6 +77,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set @@ -107,6 +110,8 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set @@ -131,7 +136,6 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # Platform support @@ -194,7 +198,6 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -213,11 +216,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -235,6 +240,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_QSPAN is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -244,13 +250,13 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 CONFIG_CONSISTENT_START=0xfd000000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 # # Networking @@ -293,8 +299,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -482,6 +486,7 @@ CONFIG_FS_ENET_MDIO_FEC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -548,6 +553,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -580,12 +586,7 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -602,12 +603,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -632,12 +643,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -650,7 +659,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set @@ -708,7 +716,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -751,6 +758,7 @@ CONFIG_MSDOS_PARTITION=y # # Library routines # +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -761,6 +769,7 @@ CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -768,6 +777,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -778,6 +788,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -788,6 +799,7 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -798,6 +810,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -811,3 +824,4 @@ CONFIG_DEBUG_INFO=y # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig index 2b1504e0a111..ba2a463b9305 100644 --- a/arch/powerpc/configs/ep8248e_defconfig +++ b/arch/powerpc/configs/ep8248e_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:09 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:09 2008 # # CONFIG_PPC64 is not set @@ -30,6 +30,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -70,18 +72,16 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -107,6 +107,7 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -194,11 +195,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -215,6 +218,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -224,11 +228,11 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00400000 # # Networking @@ -283,6 +287,7 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -498,6 +503,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -521,6 +527,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -552,12 +559,7 @@ CONFIG_HW_RANDOM=y # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -574,12 +576,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -603,12 +615,9 @@ CONFIG_DAB=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -675,7 +684,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -752,6 +760,7 @@ CONFIG_NLS_UTF8=y # # Library routines # +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -763,6 +772,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -770,6 +780,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -780,6 +791,7 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -791,6 +803,7 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -802,6 +815,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -811,45 +825,75 @@ CONFIG_BDI_SWITCH=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y -# CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_PCBC=y + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig index 125b4764aadd..ac72b48542dc 100644 --- a/arch/powerpc/configs/ep88xc_defconfig +++ b/arch/powerpc/configs/ep88xc_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:10 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:09 2008 # # CONFIG_PPC64 is not set @@ -28,6 +28,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -108,6 +110,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set @@ -212,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -234,6 +239,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_QSPAN is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -243,13 +249,13 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 CONFIG_CONSISTENT_START=0xfd000000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 # # Networking @@ -292,8 +298,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -481,6 +485,7 @@ CONFIG_FS_ENET_MDIO_FEC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -505,6 +510,7 @@ CONFIG_FS_ENET_MDIO_FEC=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -537,12 +543,7 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -559,12 +560,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -588,13 +599,10 @@ CONFIG_DAB=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -607,7 +615,6 @@ CONFIG_DAB=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set @@ -665,7 +672,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -708,6 +714,7 @@ CONFIG_MSDOS_PARTITION=y # # Library routines # +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -718,6 +725,7 @@ CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -725,6 +733,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -735,6 +744,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -745,6 +755,7 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -755,6 +766,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -767,3 +779,4 @@ CONFIG_DEBUG_INFO=y # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 22a943afc3c0..48434c2c7628 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:10 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:10 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -91,6 +93,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -118,12 +121,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -223,11 +228,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -251,6 +258,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -260,11 +268,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -313,8 +321,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -329,6 +335,7 @@ CONFIG_NF_CONNTRACK=m # CONFIG_NF_CT_ACCT is not set # CONFIG_NF_CONNTRACK_MARK is not set # CONFIG_NF_CONNTRACK_EVENTS is not set +# CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_GRE=m CONFIG_NF_CT_PROTO_SCTP=m # CONFIG_NF_CT_PROTO_UDPLITE is not set @@ -407,6 +414,7 @@ CONFIG_IP_NF_TARGET_REDIRECT=m # CONFIG_IP_NF_TARGET_NETMAP is not set # CONFIG_NF_NAT_SNMP_BASIC is not set CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_SCTP=m CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m CONFIG_NF_NAT_TFTP=m @@ -459,8 +467,6 @@ CONFIG_IEEE80211_DEBUG=y CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m CONFIG_IEEE80211_CRYPT_TKIP=m -CONFIG_IEEE80211_SOFTMAC=m -CONFIG_IEEE80211_SOFTMAC_DEBUG=y # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -486,6 +492,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -565,6 +572,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -670,7 +678,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -680,13 +692,11 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_FSL is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -726,6 +736,7 @@ CONFIG_PATA_SIL680=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -785,7 +796,6 @@ CONFIG_R8169=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -805,6 +815,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -812,6 +823,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -886,6 +898,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -913,7 +926,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -923,13 +935,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -957,6 +962,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -966,19 +972,13 @@ CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -1048,12 +1048,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -1115,12 +1125,14 @@ CONFIG_USB_DEVICE_CLASS=y # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -1138,6 +1150,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1159,6 +1172,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1202,9 +1216,11 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set # CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set @@ -1238,10 +1254,12 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1293,11 +1311,8 @@ CONFIG_RTC_DRV_RS5C372=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1318,10 +1333,9 @@ CONFIG_FS_MBCACHE=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1388,12 +1402,10 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1467,9 +1479,10 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m @@ -1481,6 +1494,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1488,6 +1502,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1498,6 +1513,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1510,6 +1526,7 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1521,6 +1538,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1532,52 +1550,82 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig index a3d52e3f2ded..066c583c1f8a 100644 --- a/arch/powerpc/configs/mpc7448_hpc2_defconfig +++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:11 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:11 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -111,6 +114,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -209,11 +213,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -235,6 +241,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -244,11 +251,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -296,8 +303,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -454,7 +459,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set CONFIG_SATA_MV=y @@ -464,7 +472,6 @@ CONFIG_SATA_MV=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -509,6 +516,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -596,7 +604,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -616,6 +623,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -623,6 +631,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -670,6 +679,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -705,12 +715,7 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -743,12 +748,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -779,6 +794,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -787,14 +804,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -814,7 +828,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -871,7 +884,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -914,6 +926,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -924,6 +937,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -931,6 +945,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -940,6 +955,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -950,48 +966,78 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig index 0264c5757f78..30d7834b7db1 100644 --- a/arch/powerpc/configs/mpc8272_ads_defconfig +++ b/arch/powerpc/configs/mpc8272_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:13 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:12 2008 # # CONFIG_PPC64 is not set @@ -30,6 +30,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -70,18 +72,16 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -108,6 +108,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -196,11 +197,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -224,6 +227,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -233,11 +237,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00400000 # # Networking @@ -292,6 +296,7 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -536,7 +541,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -554,6 +558,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -561,6 +566,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set CONFIG_PPP=y @@ -634,6 +640,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -668,12 +675,7 @@ CONFIG_HW_RANDOM=y # CONFIG_RAW_DRIVER is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -690,12 +692,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -722,13 +734,10 @@ CONFIG_DAB=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -798,7 +807,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -877,6 +885,7 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -889,6 +898,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -896,6 +906,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -906,6 +917,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -918,6 +930,7 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -929,6 +942,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -938,45 +952,75 @@ CONFIG_BDI_SWITCH=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y -# CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_PCBC=y + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 9e0dd8201691..4293c8be06e1 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc9 -# Tue Apr 15 18:07:36 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:14 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -111,12 +114,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -201,7 +206,6 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -217,11 +221,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -240,6 +246,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -249,11 +256,11 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -301,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -361,6 +366,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -439,6 +445,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -501,8 +508,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set -# CONFIG_SATA_MV is not set +CONFIG_SATA_PMP=y CONFIG_SATA_FSL=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set # CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set @@ -554,6 +563,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -607,6 +617,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -641,13 +652,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -658,6 +662,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -667,19 +672,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -757,12 +756,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -810,16 +819,20 @@ CONFIG_USB=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set @@ -828,6 +841,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -873,17 +887,15 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -903,7 +915,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -962,7 +973,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1009,6 +1019,7 @@ CONFIG_UCC=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1027,6 +1038,7 @@ CONFIG_HAVE_LMB=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1034,6 +1046,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1043,51 +1056,81 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 2075722911bb..3efab71a603b 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:37:08 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 09:03:46 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -117,12 +120,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -162,6 +167,7 @@ CONFIG_MPC8560_ADS=y CONFIG_MPC85xx_CDS=y CONFIG_MPC85xx_MDS=y CONFIG_MPC85xx_DS=y +CONFIG_KSI8560=y # CONFIG_STX_GP3 is not set CONFIG_TQM8540=y CONFIG_TQM8541=y @@ -221,11 +227,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -250,6 +258,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -259,11 +268,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -334,8 +344,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -397,6 +409,7 @@ CONFIG_FW_LOADER=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -503,7 +516,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y +# CONFIG_SATA_SIL24 is not set +CONFIG_SATA_FSL=y +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -513,13 +530,11 @@ CONFIG_SATA_AHCI=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_FSL is not set CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -559,6 +574,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -625,7 +641,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -646,6 +661,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -653,6 +669,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -717,6 +734,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -750,7 +768,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -760,13 +777,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -794,6 +804,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -803,19 +814,13 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -832,13 +837,33 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set CONFIG_DVB_CORE=m -# CONFIG_DVB_CORE_ATTACH is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m CONFIG_DVB_CAPTURE_DRIVERS=y # @@ -881,14 +906,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # DVB-S (satellite) frontends # -# CONFIG_DVB_STV0299 is not set # CONFIG_DVB_CX24110 is not set # CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_MT312 is not set -# CONFIG_DVB_VES1X93 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0299 is not set +# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_VES1X93 is not set +# CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_TDA826X is not set +# CONFIG_DVB_TUA6100 is not set # # DVB-T (terrestrial) frontends @@ -906,6 +934,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_DIB3000MC is not set # CONFIG_DVB_DIB7000M is not set # CONFIG_DVB_DIB7000P is not set +# CONFIG_DVB_TDA10048 is not set # # DVB-C (cable) frontends @@ -924,27 +953,21 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set # CONFIG_DVB_S5H1409 is not set +# CONFIG_DVB_AU8522 is not set +# CONFIG_DVB_S5H1411 is not set # -# Tuners/PLL support +# Digital terrestrial only tuners/PLL # # CONFIG_DVB_PLL is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TDA827X is not set -# CONFIG_DVB_TDA18271 is not set -# CONFIG_DVB_TUNER_QT1010 is not set -# CONFIG_DVB_TUNER_MT2060 is not set -# CONFIG_DVB_TUNER_MT2266 is not set -# CONFIG_DVB_TUNER_MT2131 is not set # CONFIG_DVB_TUNER_DIB0070 is not set -# CONFIG_DVB_TUNER_XC5000 is not set # -# Miscellaneous devices +# SEC control devices for DVB-S # # CONFIG_DVB_LNBP21 is not set +# CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_TUA6100 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1011,6 +1034,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set @@ -1085,11 +1109,11 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_SOC is not set # -# SoC Audio support for SuperH +# ALSA SoC audio for Freescale SOCs # # -# ALSA SoC audio for Freescale SOCs +# SoC Audio for the Texas Instruments OMAP # # @@ -1124,16 +1148,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_FSL is not set +CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -1151,6 +1179,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1170,7 +1199,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1208,12 +1239,21 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set +CONFIG_EDAC=y + +# +# Reporting subsystems +# +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_MM_EDAC=y +CONFIG_EDAC_MPC85XX=y CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1263,11 +1303,19 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # -# CONFIG_DMADEVICES is not set +# CONFIG_RTC_DRV_PPC is not set +CONFIG_DMADEVICES=y # -# Userspace I/O +# DMA Devices # +CONFIG_FSL_DMA=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set # CONFIG_UIO is not set # @@ -1287,7 +1335,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1357,10 +1404,9 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set -CONFIG_NFSD_TCP=y +# CONFIG_NFSD_V4 is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1444,9 +1490,10 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m @@ -1455,6 +1502,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1462,6 +1510,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1472,6 +1521,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1485,6 +1535,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1497,6 +1548,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1507,53 +1559,83 @@ CONFIG_DEBUG_INFO=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig index d01dcdb70bd7..4a8171507391 100644 --- a/arch/powerpc/configs/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:37:11 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:15 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -117,12 +120,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -162,6 +167,7 @@ CONFIG_PPC_86xx=y # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set CONFIG_MPC8641_HPCN=y +# CONFIG_SBC8641D is not set # CONFIG_MPC8610_HPCD is not set CONFIG_MPC8641=y # CONFIG_IPIC is not set @@ -211,11 +217,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -240,6 +248,8 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +CONFIG_HAS_RAPIDIO=y +# CONFIG_RAPIDIO is not set # # Advanced setup @@ -249,11 +259,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -324,8 +334,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -387,6 +399,7 @@ CONFIG_FW_LOADER=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -493,7 +506,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -503,13 +520,11 @@ CONFIG_SATA_AHCI=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_FSL is not set CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -549,6 +564,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -614,7 +630,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -634,6 +649,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -641,6 +657,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -705,6 +722,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -736,7 +754,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -746,13 +763,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -780,6 +790,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -789,19 +800,13 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -818,13 +823,33 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set CONFIG_DVB_CORE=m -# CONFIG_DVB_CORE_ATTACH is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m CONFIG_DVB_CAPTURE_DRIVERS=y # @@ -867,14 +892,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # DVB-S (satellite) frontends # -# CONFIG_DVB_STV0299 is not set # CONFIG_DVB_CX24110 is not set # CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_MT312 is not set -# CONFIG_DVB_VES1X93 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0299 is not set +# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_VES1X93 is not set +# CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_TDA826X is not set +# CONFIG_DVB_TUA6100 is not set # # DVB-T (terrestrial) frontends @@ -892,6 +920,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_DIB3000MC is not set # CONFIG_DVB_DIB7000M is not set # CONFIG_DVB_DIB7000P is not set +# CONFIG_DVB_TDA10048 is not set # # DVB-C (cable) frontends @@ -910,27 +939,21 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set # CONFIG_DVB_S5H1409 is not set +# CONFIG_DVB_AU8522 is not set +# CONFIG_DVB_S5H1411 is not set # -# Tuners/PLL support +# Digital terrestrial only tuners/PLL # # CONFIG_DVB_PLL is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TDA827X is not set -# CONFIG_DVB_TDA18271 is not set -# CONFIG_DVB_TUNER_QT1010 is not set -# CONFIG_DVB_TUNER_MT2060 is not set -# CONFIG_DVB_TUNER_MT2266 is not set -# CONFIG_DVB_TUNER_MT2131 is not set # CONFIG_DVB_TUNER_DIB0070 is not set -# CONFIG_DVB_TUNER_XC5000 is not set # -# Miscellaneous devices +# SEC control devices for DVB-S # # CONFIG_DVB_LNBP21 is not set +# CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_TUA6100 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -997,6 +1020,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set @@ -1071,11 +1095,11 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_SOC is not set # -# SoC Audio support for SuperH +# ALSA SoC audio for Freescale SOCs # # -# ALSA SoC audio for Freescale SOCs +# SoC Audio for the Texas Instruments OMAP # # @@ -1110,16 +1134,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -1137,6 +1165,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1156,7 +1185,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1194,10 +1225,12 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1249,11 +1282,8 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1273,7 +1303,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1343,10 +1372,9 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set -CONFIG_NFSD_TCP=y +# CONFIG_NFSD_V4 is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1430,9 +1458,10 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m @@ -1441,6 +1470,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1448,6 +1478,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1458,6 +1489,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1471,6 +1503,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1482,6 +1515,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1492,52 +1526,82 @@ CONFIG_DEBUG_INFO=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig index 2d831db9ae5b..46fffbcd3f99 100644 --- a/arch/powerpc/configs/mpc866_ads_defconfig +++ b/arch/powerpc/configs/mpc866_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:35 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:16 2008 # # CONFIG_PPC64 is not set @@ -28,6 +28,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -106,6 +108,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -210,11 +213,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -231,6 +236,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_PCI_QSPAN is not set # CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -240,13 +246,13 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 CONFIG_CONSISTENT_START=0xfd000000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 # # Networking @@ -294,8 +300,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -419,6 +423,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -485,6 +490,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -517,12 +523,7 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -551,12 +552,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -584,6 +595,8 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -592,13 +605,10 @@ CONFIG_USB_SUPPORT=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -620,7 +630,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -678,7 +687,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -722,6 +730,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -733,6 +742,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -740,6 +750,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -748,6 +759,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -757,48 +769,78 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig index 82151b9bba26..9df78973005e 100644 --- a/arch/powerpc/configs/mpc885_ads_defconfig +++ b/arch/powerpc/configs/mpc885_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:35 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:17 2008 # # CONFIG_PPC64 is not set @@ -28,6 +28,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -108,6 +110,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set @@ -219,11 +222,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -241,6 +246,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_QSPAN is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -250,13 +256,13 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 CONFIG_CONSISTENT_START=0xfd000000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 # # Networking @@ -299,8 +305,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -492,6 +496,7 @@ CONFIG_FS_ENET_MDIO_FEC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -516,6 +521,7 @@ CONFIG_FS_ENET_MDIO_FEC=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -548,12 +554,7 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -570,12 +571,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -599,13 +610,10 @@ CONFIG_DAB=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -618,7 +626,6 @@ CONFIG_DAB=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set @@ -676,7 +683,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -719,6 +725,7 @@ CONFIG_MSDOS_PARTITION=y # # Library routines # +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -729,6 +736,7 @@ CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -736,6 +744,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -746,6 +755,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -756,6 +766,7 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -766,6 +777,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -778,3 +790,4 @@ CONFIG_DEBUG_INFO=y # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig index 1383eb696a20..bc3bf62ddc2f 100644 --- a/arch/powerpc/configs/pq2fads_defconfig +++ b/arch/powerpc/configs/pq2fads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:36 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:18 2008 # # CONFIG_PPC64 is not set @@ -30,6 +30,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -70,19 +72,17 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -109,6 +109,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -196,11 +197,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -225,6 +228,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -234,11 +238,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00400000 # # Networking @@ -293,6 +297,7 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -513,7 +518,7 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_BLK_DEV_IDEDMA is not set -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -593,7 +598,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -611,6 +615,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -618,6 +623,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set CONFIG_PPP=y @@ -692,6 +698,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -726,12 +733,7 @@ CONFIG_HW_RANDOM=y # CONFIG_RAW_DRIVER is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -748,12 +750,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -781,11 +793,14 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_AMD5536UDC is not set @@ -795,6 +810,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_PXA2XX is not set CONFIG_USB_GADGET_M66592=y CONFIG_USB_M66592=y +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set @@ -804,6 +820,7 @@ CONFIG_USB_M66592=y CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set @@ -812,13 +829,10 @@ CONFIG_USB_ETH=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -888,7 +902,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -967,6 +980,7 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -979,6 +993,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -986,6 +1001,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -996,6 +1012,7 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1008,6 +1025,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1019,6 +1037,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -1028,46 +1047,76 @@ CONFIG_BDI_SWITCH=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y -# CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_PCBC=y + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig index f9121685f11a..c6b83577c055 100644 --- a/arch/powerpc/configs/prpmc2800_defconfig +++ b/arch/powerpc/configs/prpmc2800_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:37:15 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:18 2008 # # CONFIG_PPC64 is not set @@ -33,6 +33,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -92,6 +94,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -117,6 +120,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -215,11 +219,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -241,6 +247,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -250,13 +257,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -304,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -364,6 +369,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -435,6 +441,7 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -519,7 +526,7 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -598,7 +605,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set CONFIG_SATA_MV=y @@ -608,7 +618,6 @@ CONFIG_SATA_MV=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -653,6 +662,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -744,7 +754,6 @@ CONFIG_E1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -763,6 +772,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -770,6 +780,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -832,6 +843,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -855,7 +867,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -865,13 +876,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -898,6 +902,7 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set CONFIG_I2C_MV64XXX=y # @@ -908,19 +913,13 @@ CONFIG_I2C_MV64XXX=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -990,12 +989,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -1055,11 +1064,13 @@ CONFIG_USB_DEVICEFS=y # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set @@ -1074,6 +1085,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1120,10 +1132,12 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1175,11 +1189,8 @@ CONFIG_RTC_DRV_MAX6900=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1199,7 +1210,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1257,7 +1267,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1300,6 +1309,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1310,6 +1320,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1317,6 +1328,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1326,6 +1338,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1336,48 +1349,78 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/sbc8641d_defconfig b/arch/powerpc/configs/sbc8641d_defconfig index 3180125aa6c4..8227510b41a9 100644 --- a/arch/powerpc/configs/sbc8641d_defconfig +++ b/arch/powerpc/configs/sbc8641d_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Thu Apr 10 18:03:25 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:19 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_LOCKBREAK=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -116,12 +119,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -197,7 +202,6 @@ CONFIG_PREEMPT=y # CONFIG_PREEMPT_RCU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m -CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -213,11 +217,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -237,12 +243,14 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -252,11 +260,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -328,8 +336,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -534,6 +544,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -610,6 +621,7 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -727,7 +739,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -743,6 +754,7 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set CONFIG_ATM_DRIVERS=y # CONFIG_ATM_DUMMY is not set @@ -825,6 +837,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -862,13 +875,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -895,6 +901,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -904,19 +911,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -998,12 +999,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -1041,6 +1052,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1049,14 +1062,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1084,8 +1094,8 @@ CONFIG_REISERFS_FS_POSIX_ACL=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set CONFIG_OCFS2_FS=m +CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -1145,7 +1155,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -CONFIG_NFS_DIRECTIO=y # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1221,6 +1230,7 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1241,6 +1251,7 @@ CONFIG_HAVE_LMB=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -1251,6 +1262,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1262,6 +1274,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1274,6 +1287,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_DEBUGGER=y # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1289,54 +1303,84 @@ CONFIG_SECURITY_CAPABILITIES=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_CAMELLIA is not set -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index fdbfd39a3aca..88f6aa8273be 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:37:19 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:20 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -85,6 +87,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -109,12 +112,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -214,11 +219,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,115200" @@ -242,6 +249,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -251,11 +259,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -358,6 +364,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -433,6 +440,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -513,7 +521,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -638,7 +646,6 @@ CONFIG_R8169=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -654,6 +661,7 @@ CONFIG_R8169=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -690,6 +698,7 @@ CONFIG_R8169=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -717,7 +726,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m CONFIG_NVRAM=y -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -727,13 +735,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -761,6 +762,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -770,19 +772,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -799,12 +795,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -841,16 +847,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set @@ -865,6 +875,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -885,6 +896,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -922,10 +934,12 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -977,11 +991,8 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1002,10 +1013,9 @@ CONFIG_FS_MBCACHE=y # CONFIG_FS_POSIX_ACL is not set CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1138,6 +1148,7 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1150,6 +1161,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1157,6 +1169,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1166,6 +1179,7 @@ CONFIG_HAS_DMA=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1181,3 +1195,4 @@ CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set -- cgit v1.2.3 From f17c63231c9c2bfc5717af1890ad17312a1c2c1c Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 17 Mar 2008 20:52:08 +0300 Subject: [POWERPC] 83xx: MPC837xRDB's VSC7385 ethernet switch isn't on the MDIO bus MDIO-less PHYs should use CONFIG_FIXED_PHY driver and appropriate fixed-link property in the device tree. If not, ethernet will not work: e0024520:03 not found eth1: Could not attach to PHY IP-Config: Failed to open eth1 Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8377_rdb.dts | 8 +------- arch/powerpc/boot/dts/mpc8378_rdb.dts | 8 +------- arch/powerpc/boot/dts/mpc8379_rdb.dts | 8 +------- arch/powerpc/configs/83xx/mpc837x_rdb_defconfig | 4 ++-- 4 files changed, 5 insertions(+), 23 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index 5bc09ad016f5..f3083c779b66 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -164,12 +164,6 @@ reg = <0x2>; device_type = "ethernet-phy"; }; - phy3: ethernet-phy@3 { - interrupt-parent = <&ipic>; - interrupts = <18 0x8>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; }; enet0: ethernet@24000 { @@ -195,7 +189,7 @@ interrupts = <35 0x8 36 0x8 37 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; - phy-handle = <&phy3>; + fixed-link = <1 1 1000 0 0>; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index 711f9a30f9ab..0e872a60e091 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -164,12 +164,6 @@ reg = <0x2>; device_type = "ethernet-phy"; }; - phy3: ethernet-phy@3 { - interrupt-parent = <&ipic>; - interrupts = <18 0x8>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; }; enet0: ethernet@24000 { @@ -195,7 +189,7 @@ interrupts = <35 0x8 36 0x8 37 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; - phy-handle = <&phy3>; + fixed-link = <1 1 1000 0 0>; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index c11ceb7d3299..1eb8defaff6f 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -164,12 +164,6 @@ reg = <0x2>; device_type = "ethernet-phy"; }; - phy3: ethernet-phy@3 { - interrupt-parent = <&ipic>; - interrupts = <18 0x8>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; }; enet0: ethernet@24000 { @@ -195,7 +189,7 @@ interrupts = <35 0x8 36 0x8 37 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; - phy-handle = <&phy3>; + fixed-link = <1 1 1000 0 0>; }; serial0: serial@4500 { diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index 7c1c7fa4b3f5..0d448556f53a 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:29 2008 +# Tue Jun 10 09:17:12 2008 # # CONFIG_PPC64 is not set @@ -454,7 +454,7 @@ CONFIG_MARVELL_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set -# CONFIG_FIXED_PHY is not set +CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -- cgit v1.2.3 From d1daeabf0da5bfa1943272ce508e2ba785730bf0 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Tue, 10 Jun 2008 10:20:53 -0500 Subject: [SCSI] sr: fix corrupt CD data after media change and delay Reported-by: Geert Uytterhoeven If you delay 30s or more before mounting a CD after inserting it then the kernel has the wrong value for the CD size. http://marc.info/?t=121276133000001 The problem is in sr_test_unit_ready(): the function eats unit attentions without adjusting the sdev->changed status. This means that when the CD signals changed media via unit attention, we can ignore it. Fix by making sr_test_unit_ready() adjust the changed status. Tested-by: Geert Uytterhoeven Cc: Stable Tree Signed-off-by: James Bottomley --- drivers/scsi/sr.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 7ee86d4a7618..c82df8bd4d89 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -178,6 +178,9 @@ int sr_test_unit_ready(struct scsi_device *sdev, struct scsi_sense_hdr *sshdr) the_result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0, sshdr, SR_TIMEOUT, retries--); + if (scsi_sense_valid(sshdr) && + sshdr->sense_key == UNIT_ATTENTION) + sdev->changed = 1; } while (retries > 0 && (!scsi_status_is_good(the_result) || -- cgit v1.2.3 From 24797a344293601f14f49e2d259c3ca447c4f802 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 10 Jun 2008 12:29:49 -0700 Subject: RDMA/nes: Fix off-by-one in nes_reg_user_mr() error path nes_reg_user_mr() should fail if page_count becomes >= 1024 * 512 rather than just testing for strict >, because page_count is essentially used as an index into an array with 1024 * 512 entries, so allowing the loop to continue with page_count == 1024 * 512 means that memory after the end of the array is corrupted. This leads to a crash triggerable by a userspace application that requests registration of a too-big region. Also get rid of the call to pci_free_consistent() here to avoid corrupting state with a double free, since the same memory will be freed in the code jumped to at reg_user_mr_err. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes_verbs.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index 99b3c4ae86eb..d617da9bd351 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -2456,10 +2456,8 @@ static struct ib_mr *nes_reg_user_mr(struct ib_pd *pd, u64 start, u64 length, if ((page_count!=0)&&(page_count<<12)-(region->offset&(4096-1))>=region->length) goto enough_pages; if ((page_count&0x01FF) == 0) { - if (page_count>(1024*512)) { + if (page_count >= 1024 * 512) { ib_umem_release(region); - pci_free_consistent(nesdev->pcidev, 4096, vpbl.pbl_vbase, - vpbl.pbl_pbase); nes_free_resource(nesadapter, nesadapter->allocated_mrs, stag_index); kfree(nesmr); -- cgit v1.2.3 From 8d6bcd6e219f183aba4fb62bb7065a4db772ac49 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sat, 24 May 2008 16:11:51 +1000 Subject: [POWERPC] bootwrapper: add simpleImage* to list of boot targets Without simpleImage% in the BOOT_TARGETS list, it is impossible to build any of the simpleImages. Signed-off-by: Grant Likely Signed-off-by: Josh Boyer --- arch/powerpc/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 9dcdc036cdf7..86096ccc5914 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -154,7 +154,7 @@ all: zImage CPPFLAGS_vmlinux.lds := -Upowerpc -BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.% +BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.% simpleImage.% PHONY += $(BOOT_TARGETS) -- cgit v1.2.3 From 83014699b06fb9a300d896c7c49fb8be1c6c5ddc Mon Sep 17 00:00:00 2001 From: stephane eranian Date: Wed, 11 Jun 2008 15:24:13 -0700 Subject: [IA64] perfmon: fix async exit bug Move the cleanup of the async queue to the close callback from the flush callback. This avoids losing asynchronous overflow notifications when the file descriptor is shared by multiple processes and one terminates. Signed-off-by: Stephane Eranian Signed-off-by: Tony Luck --- arch/ia64/kernel/perfmon.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 71d05133f556..7714a97b0104 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -1864,11 +1864,6 @@ pfm_flush(struct file *filp, fl_owner_t id) * invoked after, it will find an empty queue and no * signal will be sent. In both case, we are safe */ - if (filp->f_flags & FASYNC) { - DPRINT(("cleaning up async_queue=%p\n", ctx->ctx_async_queue)); - pfm_do_fasync (-1, filp, ctx, 0); - } - PROTECT_CTX(ctx, flags); state = ctx->ctx_state; @@ -1999,6 +1994,11 @@ pfm_close(struct inode *inode, struct file *filp) return -EBADF; } + if (filp->f_flags & FASYNC) { + DPRINT(("cleaning up async_queue=%p\n", ctx->ctx_async_queue)); + pfm_do_fasync(-1, filp, ctx, 0); + } + PROTECT_CTX(ctx, flags); state = ctx->ctx_state; -- cgit v1.2.3 From 3463a93def55c309f3c0d0a8aaf216be3be42d64 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Wed, 11 Jun 2008 17:29:27 -0600 Subject: [IA64] Update check_sal_cache_flush to use platform_send_ipi() check_sal_cache_flush is used to detect broken firmware that drops pending interrupts. The old implementation schedules a timer interrupt for itself in the future by getting the current value of the Interval Timer Counter + 1000 cycles, waits for the interrupt to be pended, calls SAL_CACHE_FLUSH, and finally checks to see if the interrupt is still pending. This implementation can cause problems for virtual machine code if the process of scheduling the timer interrupt takes more than 1000 cycles; the virtual machine can end up sleeping for several hundred years while waiting for the ITC to wrap around. The fix is to use platform_send_ipi. The processor will still send an interrupt to itself, using the IA64_IPI_DM_INT delivery mode, which causes the IPI to look like an external interrupt. The rest of the SAL_CACHE_FLUSH + checking to see if the interrupt is still pending remains unchanged. This fix has been boot tested successfully on: - intel tiger2 - hp rx6600 - hp rx5670 The rx5670 has known buggy firmware, where SAL_CACHE_FLUSH drops pending interrupts. A boot test on this machine showed this message on the console: SAL: SAL_CACHE_FLUSH drops interrupts; PAL_CACHE_FLUSH will be used instead Which proves that the self-inflicted IPI approach is viable. And as expected, the other tested platforms correctly did not display the warning. Signed-off-by: Alex Chiang Signed-off-by: Tony Luck --- arch/ia64/kernel/sal.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/ia64/kernel/sal.c b/arch/ia64/kernel/sal.c index 7e0259709c04..0464173ea568 100644 --- a/arch/ia64/kernel/sal.c +++ b/arch/ia64/kernel/sal.c @@ -252,11 +252,10 @@ check_sal_cache_flush (void) local_irq_save(flags); /* - * Schedule a timer interrupt, wait until it's reported, and see if - * SAL_CACHE_FLUSH drops it. + * Send ourselves a timer interrupt, wait until it's reported, and see + * if SAL_CACHE_FLUSH drops it. */ - ia64_set_itv(IA64_TIMER_VECTOR); - ia64_set_itm(ia64_get_itc() + 1000); + platform_send_ipi(cpu, IA64_TIMER_VECTOR, IA64_IPI_DM_INT, 0); while (!ia64_get_irr(IA64_TIMER_VECTOR)) cpu_relax(); -- cgit v1.2.3 From 41ee2ff404ec76194315aeed57ac973b010abe1d Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Fri, 13 Jun 2008 15:04:40 +1000 Subject: drm: use drms ioctl cmd not what we get passed from userspace. This enforces us to use the drm ioctl types so read/write works correctly and not believe what userspace tells us. It does this hopefully without breaking the drm api. Fixes bug from thread: BUG: unable to handle kernel NULL pointer dereference (drm_getunique) Signed-off-by: Dave Airlie --- drivers/char/drm/drm_drv.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/char/drm/drm_drv.c b/drivers/char/drm/drm_drv.c index fc54140551a7..22957ac15df4 100644 --- a/drivers/char/drm/drm_drv.c +++ b/drivers/char/drm/drm_drv.c @@ -475,6 +475,8 @@ int drm_ioctl(struct inode *inode, struct file *filp, else goto err_i1; + /* Do not trust userspace, use our own definition */ + cmd = ioctl->cmd; func = ioctl->func; /* is there a local override? */ if ((nr == DRM_IOCTL_NR(DRM_IOCTL_DMA)) && dev->driver->dma_ioctl) -- cgit v1.2.3 From b554305905d9bc2184b424aa67712119d5c9fb99 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 13 Jun 2008 15:06:31 +1000 Subject: drm: the sg alloc ioctl should write back the handle to userspace Signed-off-by: Dave Airlie --- drivers/char/drm/drm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/drm/drm.h b/drivers/char/drm/drm.h index 3a05c6d5ebe1..38d3c6b8276a 100644 --- a/drivers/char/drm/drm.h +++ b/drivers/char/drm/drm.h @@ -628,7 +628,7 @@ struct drm_set_version { #define DRM_IOCTL_AGP_BIND DRM_IOW( 0x36, struct drm_agp_binding) #define DRM_IOCTL_AGP_UNBIND DRM_IOW( 0x37, struct drm_agp_binding) -#define DRM_IOCTL_SG_ALLOC DRM_IOW( 0x38, struct drm_scatter_gather) +#define DRM_IOCTL_SG_ALLOC DRM_IOWR(0x38, struct drm_scatter_gather) #define DRM_IOCTL_SG_FREE DRM_IOW( 0x39, struct drm_scatter_gather) #define DRM_IOCTL_WAIT_VBLANK DRM_IOWR(0x3a, union drm_wait_vblank) -- cgit v1.2.3 From edfa78b2ba651782d70be6d1fef214e21a26d8cb Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Tue, 3 Jun 2008 20:29:50 +0200 Subject: rt2x00: Don't kill guardian_urb when it wasn't created This fixes a "BUG: unable to handle kernel paging request" bug in rt73usb which was caused by killing the guardian_urb while it had never been allocated for rt73usb. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00usb.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 5a331674dcb2..e5ceae805b57 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -362,6 +362,12 @@ void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev) } } + /* + * Kill guardian urb (if required by driver). + */ + if (!test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags)) + return; + for (i = 0; i < rt2x00dev->bcn->limit; i++) { priv_bcn = rt2x00dev->bcn->entries[i].priv_data; usb_kill_urb(priv_bcn->urb); -- cgit v1.2.3 From 051c256f672efa356a4cda1841132dbc86541090 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Tue, 3 Jun 2008 20:29:47 +0200 Subject: rt2x00: Restrict DMA to 32-bit addresses. None of the rt2x00 PCI devices support 64-bit DMA addresses (they all only accept 32-bit buffer addresses). Hence it makes no sense to try to enable 64-bit DMA addresses. Only try to enable 32-bit DMA addresses. Signed-off-by: Gertjan van Wingerde Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00pci.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index 971af2546b59..60893de3bf8f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -412,8 +412,7 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) if (pci_set_mwi(pci_dev)) ERROR_PROBE("MWI not available.\n"); - if (pci_set_dma_mask(pci_dev, DMA_64BIT_MASK) && - pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) { + if (pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) { ERROR_PROBE("PCI DMA not supported.\n"); retval = -EIO; goto exit_disable_device; -- cgit v1.2.3 From 028118a5f09a9c807e6b43e2231efdff9f224c74 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Thu, 12 Jun 2008 11:58:56 +0200 Subject: b43: Fix possible NULL pointer dereference in DMA code This fixes a possible NULL pointer dereference in an error path of the DMA allocation error checking code. This is also necessary for a future DMA API change that is on its way into the mainline kernel that adds an additional dev parameter to dma_mapping_error(). This patch moves the whole struct b43_dmaring struct initialization right before any DMA allocation operation. Reported-by: Miles Lane Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/b43/dma.c | 65 +++++++++++++++++++++--------------------- 1 file changed, 32 insertions(+), 33 deletions(-) diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 6dcbb3c87e72..e23f2f172bd7 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -795,24 +795,49 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, { struct b43_dmaring *ring; int err; - int nr_slots; dma_addr_t dma_test; ring = kzalloc(sizeof(*ring), GFP_KERNEL); if (!ring) goto out; - ring->type = type; - nr_slots = B43_RXRING_SLOTS; + ring->nr_slots = B43_RXRING_SLOTS; if (for_tx) - nr_slots = B43_TXRING_SLOTS; + ring->nr_slots = B43_TXRING_SLOTS; - ring->meta = kcalloc(nr_slots, sizeof(struct b43_dmadesc_meta), + ring->meta = kcalloc(ring->nr_slots, sizeof(struct b43_dmadesc_meta), GFP_KERNEL); if (!ring->meta) goto err_kfree_ring; + + ring->type = type; + ring->dev = dev; + ring->mmio_base = b43_dmacontroller_base(type, controller_index); + ring->index = controller_index; + if (type == B43_DMA_64BIT) + ring->ops = &dma64_ops; + else + ring->ops = &dma32_ops; if (for_tx) { - ring->txhdr_cache = kcalloc(nr_slots, + ring->tx = 1; + ring->current_slot = -1; + } else { + if (ring->index == 0) { + ring->rx_buffersize = B43_DMA0_RX_BUFFERSIZE; + ring->frameoffset = B43_DMA0_RX_FRAMEOFFSET; + } else if (ring->index == 3) { + ring->rx_buffersize = B43_DMA3_RX_BUFFERSIZE; + ring->frameoffset = B43_DMA3_RX_FRAMEOFFSET; + } else + B43_WARN_ON(1); + } + spin_lock_init(&ring->lock); +#ifdef CONFIG_B43_DEBUG + ring->last_injected_overflow = jiffies; +#endif + + if (for_tx) { + ring->txhdr_cache = kcalloc(ring->nr_slots, b43_txhdr_size(dev), GFP_KERNEL); if (!ring->txhdr_cache) @@ -828,7 +853,7 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, b43_txhdr_size(dev), 1)) { /* ugh realloc */ kfree(ring->txhdr_cache); - ring->txhdr_cache = kcalloc(nr_slots, + ring->txhdr_cache = kcalloc(ring->nr_slots, b43_txhdr_size(dev), GFP_KERNEL | GFP_DMA); if (!ring->txhdr_cache) @@ -853,32 +878,6 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, DMA_TO_DEVICE); } - ring->dev = dev; - ring->nr_slots = nr_slots; - ring->mmio_base = b43_dmacontroller_base(type, controller_index); - ring->index = controller_index; - if (type == B43_DMA_64BIT) - ring->ops = &dma64_ops; - else - ring->ops = &dma32_ops; - if (for_tx) { - ring->tx = 1; - ring->current_slot = -1; - } else { - if (ring->index == 0) { - ring->rx_buffersize = B43_DMA0_RX_BUFFERSIZE; - ring->frameoffset = B43_DMA0_RX_FRAMEOFFSET; - } else if (ring->index == 3) { - ring->rx_buffersize = B43_DMA3_RX_BUFFERSIZE; - ring->frameoffset = B43_DMA3_RX_FRAMEOFFSET; - } else - B43_WARN_ON(1); - } - spin_lock_init(&ring->lock); -#ifdef CONFIG_B43_DEBUG - ring->last_injected_overflow = jiffies; -#endif - err = alloc_ringmemory(ring); if (err) goto err_kfree_txhdr_cache; -- cgit v1.2.3 From 98a3b2fe435ae76170936c14f5c9e6a87548e3ef Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Thu, 12 Jun 2008 12:36:29 +0200 Subject: b43: Fix noise calculation WARN_ON This removes a WARN_ON that is responsible for the following koops: http://www.kerneloops.org/searchweek.php?search=b43_generate_noise_sample The comment in the patch describes why it's safe to simply remove the check. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/b43/b43.h | 1 - drivers/net/wireless/b43/main.c | 16 ++++++++++------ 2 files changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index dfa4bdd5597c..d3db298c05fc 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -630,7 +630,6 @@ struct b43_pio { /* Context information for a noise calculation (Link Quality). */ struct b43_noise_calculation { - u8 channel_at_start; bool calculation_running; u8 nr_samples; s8 samples[8][4]; diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 6c3d9ea0a9f8..fa4b0d8b74a2 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -1145,7 +1145,6 @@ static void b43_generate_noise_sample(struct b43_wldev *dev) b43_jssi_write(dev, 0x7F7F7F7F); b43_write32(dev, B43_MMIO_MACCMD, b43_read32(dev, B43_MMIO_MACCMD) | B43_MACCMD_BGNOISE); - B43_WARN_ON(dev->noisecalc.channel_at_start != dev->phy.channel); } static void b43_calculate_link_quality(struct b43_wldev *dev) @@ -1154,7 +1153,6 @@ static void b43_calculate_link_quality(struct b43_wldev *dev) if (dev->noisecalc.calculation_running) return; - dev->noisecalc.channel_at_start = dev->phy.channel; dev->noisecalc.calculation_running = 1; dev->noisecalc.nr_samples = 0; @@ -1171,9 +1169,16 @@ static void handle_irq_noise(struct b43_wldev *dev) /* Bottom half of Link Quality calculation. */ + /* Possible race condition: It might be possible that the user + * changed to a different channel in the meantime since we + * started the calculation. We ignore that fact, since it's + * not really that much of a problem. The background noise is + * an estimation only anyway. Slightly wrong results will get damped + * by the averaging of the 8 sample rounds. Additionally the + * value is shortlived. So it will be replaced by the next noise + * calculation round soon. */ + B43_WARN_ON(!dev->noisecalc.calculation_running); - if (dev->noisecalc.channel_at_start != phy->channel) - goto drop_calculation; *((__le32 *)noise) = cpu_to_le32(b43_jssi_read(dev)); if (noise[0] == 0x7F || noise[1] == 0x7F || noise[2] == 0x7F || noise[3] == 0x7F) @@ -1214,11 +1219,10 @@ static void handle_irq_noise(struct b43_wldev *dev) average -= 48; dev->stats.link_noise = average; - drop_calculation: dev->noisecalc.calculation_running = 0; return; } - generate_new: +generate_new: b43_generate_noise_sample(dev); } -- cgit v1.2.3 From e76328e4a8260707fbc29c99773fb5ba4627096c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 11 Jun 2008 12:57:58 -0700 Subject: rt2x00: INPUT build failure Config symbols that select RFKILL need to depend on INPUT so that undefined symbols are not used in the build. This patch fixes the input_* symbols build errors. (.text+0x174cdc): undefined reference to `input_unregister_device' (.text+0x174d9f): undefined reference to `input_allocate_device' (.text+0x174e2d): undefined reference to `input_register_device' (.text+0x174e53): undefined reference to `input_free_device' rt2x00rfkill.c:(.text+0x176dc4): undefined reference to `input_allocate_polled_device' rt2x00rfkill.c:(.text+0x176e8b): undefined reference to `input_event' rt2x00rfkill.c:(.text+0x176e9f): undefined reference to `input_event' (.text+0x176eca): undefined reference to `input_unregister_polled_device' (.text+0x176efc): undefined reference to `input_free_polled_device' (.text+0x176f37): undefined reference to `input_free_polled_device' (.text+0x176fd8): undefined reference to `input_register_polled_device' (.text+0x1772c0): undefined reference to `led_classdev_resume' (.text+0x1772d4): undefined reference to `led_classdev_resume' (.text+0x1772e8): undefined reference to `led_classdev_resume' (.text+0x17730a): undefined reference to `led_classdev_suspend' (.text+0x17731e): undefined reference to `led_classdev_suspend' (.text+0x17732f): undefined reference to `led_classdev_suspend' rt2x00leds.c:(.text+0x177348): undefined reference to `led_classdev_unregister' rt2x00leds.c:(.text+0x1773c0): undefined reference to `led_classdev_register' rfkill-input.c:(.text+0x209e4c): undefined reference to `input_close_device' rfkill-input.c:(.text+0x209e53): undefined reference to `input_unregister_handle' rfkill-input.c:(.text+0x209ea1): undefined reference to `input_register_handle' rfkill-input.c:(.text+0x209eae): undefined reference to `input_open_device' rfkill-input.c:(.text+0x209ebb): undefined reference to `input_unregister_handle' rfkill-input.c:(.init.text+0x17405): undefined reference to `input_register_handler' rfkill-input.c:(.exit.text+0x194f): undefined reference to `input_unregister_handler' make[1]: *** [vmlinux] Error 1 Signed-off-by: Randy Dunlap Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/Kconfig | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index ab1029e79884..23abef92699f 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -32,6 +32,7 @@ config RT2X00_LIB_FIRMWARE config RT2X00_LIB_RFKILL boolean depends on RT2X00_LIB + depends on INPUT select RFKILL select INPUT_POLLDEV @@ -51,7 +52,7 @@ config RT2400PCI config RT2400PCI_RFKILL bool "RT2400 rfkill support" - depends on RT2400PCI + depends on RT2400PCI && INPUT select RT2X00_LIB_RFKILL ---help--- This adds support for integrated rt2400 devices that feature a @@ -78,7 +79,7 @@ config RT2500PCI config RT2500PCI_RFKILL bool "RT2500 rfkill support" - depends on RT2500PCI + depends on RT2500PCI && INPUT select RT2X00_LIB_RFKILL ---help--- This adds support for integrated rt2500 devices that feature a @@ -107,7 +108,7 @@ config RT61PCI config RT61PCI_RFKILL bool "RT61 rfkill support" - depends on RT61PCI + depends on RT61PCI && INPUT select RT2X00_LIB_RFKILL ---help--- This adds support for integrated rt61 devices that feature a -- cgit v1.2.3 From 6847aa5cce6e22c3625a243b02909ac46aafa110 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 11 Jun 2008 13:32:22 -0700 Subject: rt2x00: LEDS build failure Config symbols that select LEDS_CLASS need to depend on NEW_LEDS so that undefined symbols are not used in the build. The alternative is to select NEW_LEDS, which some drivers do. This patch fixes the led_* symbols build errors. (.text+0x174cdc): undefined reference to `input_unregister_device' (.text+0x174d9f): undefined reference to `input_allocate_device' (.text+0x174e2d): undefined reference to `input_register_device' (.text+0x174e53): undefined reference to `input_free_device' rt2x00rfkill.c:(.text+0x176dc4): undefined reference to `input_allocate_polled_device' rt2x00rfkill.c:(.text+0x176e8b): undefined reference to `input_event' rt2x00rfkill.c:(.text+0x176e9f): undefined reference to `input_event' (.text+0x176eca): undefined reference to `input_unregister_polled_device' (.text+0x176efc): undefined reference to `input_free_polled_device' (.text+0x176f37): undefined reference to `input_free_polled_device' (.text+0x176fd8): undefined reference to `input_register_polled_device' (.text+0x1772c0): undefined reference to `led_classdev_resume' (.text+0x1772d4): undefined reference to `led_classdev_resume' (.text+0x1772e8): undefined reference to `led_classdev_resume' (.text+0x17730a): undefined reference to `led_classdev_suspend' (.text+0x17731e): undefined reference to `led_classdev_suspend' (.text+0x17732f): undefined reference to `led_classdev_suspend' rt2x00leds.c:(.text+0x177348): undefined reference to `led_classdev_unregister' rt2x00leds.c:(.text+0x1773c0): undefined reference to `led_classdev_register' rfkill-input.c:(.text+0x209e4c): undefined reference to `input_close_device' rfkill-input.c:(.text+0x209e53): undefined reference to `input_unregister_handle' rfkill-input.c:(.text+0x209ea1): undefined reference to `input_register_handle' rfkill-input.c:(.text+0x209eae): undefined reference to `input_open_device' rfkill-input.c:(.text+0x209ebb): undefined reference to `input_unregister_handle' rfkill-input.c:(.init.text+0x17405): undefined reference to `input_register_handler' rfkill-input.c:(.exit.text+0x194f): undefined reference to `input_unregister_handler' make[1]: *** [vmlinux] Error 1 Signed-off-by: Randy Dunlap Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/Kconfig | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index 23abef92699f..2d611876bbe0 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -38,7 +38,7 @@ config RT2X00_LIB_RFKILL config RT2X00_LIB_LEDS boolean - depends on RT2X00_LIB + depends on RT2X00_LIB && NEW_LEDS config RT2400PCI tristate "Ralink rt2400 pci/pcmcia support" @@ -61,7 +61,7 @@ config RT2400PCI_RFKILL config RT2400PCI_LEDS bool "RT2400 leds support" - depends on RT2400PCI + depends on RT2400PCI && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS ---help--- @@ -88,7 +88,7 @@ config RT2500PCI_RFKILL config RT2500PCI_LEDS bool "RT2500 leds support" - depends on RT2500PCI + depends on RT2500PCI && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS ---help--- @@ -117,7 +117,7 @@ config RT61PCI_RFKILL config RT61PCI_LEDS bool "RT61 leds support" - depends on RT61PCI + depends on RT61PCI && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS ---help--- @@ -134,7 +134,7 @@ config RT2500USB config RT2500USB_LEDS bool "RT2500 leds support" - depends on RT2500USB + depends on RT2500USB && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS ---help--- @@ -153,7 +153,7 @@ config RT73USB config RT73USB_LEDS bool "RT73 leds support" - depends on RT73USB + depends on RT73USB && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS ---help--- -- cgit v1.2.3 From e6340361f9c70e84312caed98c6e058ac6234e9b Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Thu, 12 Jun 2008 15:33:13 +0200 Subject: ssb: Fix coherent DMA mask for PCI devices This fixes setting the coherent DMA mask for PCI devices. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/ssb/main.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index 7cf8851286b5..d184f2aea78d 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -1168,15 +1168,21 @@ EXPORT_SYMBOL(ssb_dma_translation); int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask) { struct device *dma_dev = ssb_dev->dma_dev; + int err = 0; #ifdef CONFIG_SSB_PCIHOST - if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI) - return dma_set_mask(dma_dev, mask); + if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI) { + err = pci_set_dma_mask(ssb_dev->bus->host_pci, mask); + if (err) + return err; + err = pci_set_consistent_dma_mask(ssb_dev->bus->host_pci, mask); + return err; + } #endif dma_dev->coherent_dma_mask = mask; dma_dev->dma_mask = &dma_dev->coherent_dma_mask; - return 0; + return err; } EXPORT_SYMBOL(ssb_dma_set_mask); -- cgit v1.2.3 From 5c5f9664d5284d8542062fed39e1f19b80db7aa5 Mon Sep 17 00:00:00 2001 From: Abhijeet Kolekar Date: Thu, 12 Jun 2008 09:47:16 +0800 Subject: mac80211 : fix for iwconfig in ad-hoc mode The patch checks interface status, if it is in IBSS_JOINED mode show cell id it is associated with. Signed-off-by: Abhijeet Kolekar Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- net/mac80211/wext.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index a8bb8e31b1ec..6106cb79060c 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -496,7 +496,8 @@ static int ieee80211_ioctl_giwap(struct net_device *dev, sdata = IEEE80211_DEV_TO_SUB_IF(dev); if (sdata->vif.type == IEEE80211_IF_TYPE_STA || sdata->vif.type == IEEE80211_IF_TYPE_IBSS) { - if (sdata->u.sta.state == IEEE80211_ASSOCIATED) { + if (sdata->u.sta.state == IEEE80211_ASSOCIATED || + sdata->u.sta.state == IEEE80211_IBSS_JOINED) { ap_addr->sa_family = ARPHRD_ETHER; memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN); return 0; -- cgit v1.2.3 From 995ad6c5a415c9389d094d246ca1b305c1e31813 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 12 Jun 2008 20:08:19 +0300 Subject: mac80211: add missing new line in debug print HT_DEBUG This patch adds '\n' in debug printk (wme.c HT DEBUG) Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- net/mac80211/wme.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c index dc1598b86004..635b996c8c35 100644 --- a/net/mac80211/wme.c +++ b/net/mac80211/wme.c @@ -673,7 +673,7 @@ int ieee80211_ht_agg_queue_add(struct ieee80211_local *local, #ifdef CONFIG_MAC80211_HT_DEBUG if (net_ratelimit()) printk(KERN_DEBUG "allocated aggregation queue" - " %d tid %d addr %s pool=0x%lX", + " %d tid %d addr %s pool=0x%lX\n", i, tid, print_mac(mac, sta->addr), q->qdisc_pool[0]); #endif /* CONFIG_MAC80211_HT_DEBUG */ -- cgit v1.2.3 From cb62eccd7d946f7fb92b8beb79988726ec92c227 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Thu, 12 Jun 2008 20:47:17 +0200 Subject: rt2x00: Add D-link DWA111 support Add new rt73usb USB ID for D-Link DWA111 Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt73usb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index da19a3a91f4d..fff8386e816b 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2131,6 +2131,7 @@ static struct usb_device_id rt73usb_device_table[] = { /* D-Link */ { USB_DEVICE(0x07d1, 0x3c03), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x07d1, 0x3c06), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x07d1, 0x3c07), USB_DEVICE_DATA(&rt73usb_ops) }, /* Gemtek */ { USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) }, -- cgit v1.2.3 From d385c2a85877f0cb785070094edf9a624c090d68 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sat, 14 Jun 2008 01:01:18 -0400 Subject: ACPI Exception (video-1721): UNKNOWN_STATUS_CODE, Cant attach device The child of a video bus device is not alway a video device. It should be a warn message rather than an exception here. http://bugzilla.kernel.org/show_bug.cgi?id=9761 Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 5e5dda3a3027..d089c4519d45 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1713,7 +1713,8 @@ acpi_video_bus_get_devices(struct acpi_video_bus *video, status = acpi_video_bus_get_one_device(dev, video); if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, "Cant attach device")); + ACPI_DEBUG_PRINT((ACPI_DB_WARN, + "Cant attach device")); continue; } } -- cgit v1.2.3 From f163ff5176a8e9c827d8ebe044710d67d40799c3 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Sat, 14 Jun 2008 01:26:37 -0400 Subject: ACPI: no AC status notification http://bugzilla.kernel.org/show_bug.cgi?id=10695 Signed-off-by: Len Brown --- drivers/acpi/ac.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index 5b73f6a2cd86..831883b7d6c9 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -233,6 +233,9 @@ static void acpi_ac_notify(acpi_handle handle, u32 event, void *data) device = ac->device; switch (event) { + default: + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Unsupported event [0x%x]\n", event)); case ACPI_AC_NOTIFY_STATUS: case ACPI_NOTIFY_BUS_CHECK: case ACPI_NOTIFY_DEVICE_CHECK: @@ -244,11 +247,6 @@ static void acpi_ac_notify(acpi_handle handle, u32 event, void *data) #ifdef CONFIG_ACPI_SYSFS_POWER kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE); #endif - break; - default: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Unsupported event [0x%x]\n", event)); - break; } return; -- cgit v1.2.3 From 3ed7897242b7efe977f3a8d06d4e5a4ebe28b10e Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Wed, 11 Jun 2008 19:21:00 -0500 Subject: [SCSI] scsi_host regression: fix scsi host leak commit 9c7701088a61cc0cf8a6e1c68d1e74e3cc2ee0b7 Author: Dave Young Date: Tue Jan 22 14:01:34 2008 +0800 scsi: use class iteration api Isn't a correct replacement for the original hand rolled host lookup. The problem is that class_find_child would get a reference to the host's class device which is never released. Since the host class device holds a reference to the host gendev, the host can never be freed. In 2.6.26 we started using class_find_device, and this function also gets a reference to the device, so we end up with an extra ref and the host will not get released. This patch adds a put_device to balance the class_find_device() get. I kept the scsi_host_get in scsi_host_lookup, because the target layer is using scsi_host_lookup and it looks like it needs the SHOST_DEL check. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/hosts.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 3690360d7a79..c6457bfc8a49 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -456,6 +456,10 @@ static int __scsi_host_match(struct device *dev, void *data) * * Return value: * A pointer to located Scsi_Host or NULL. + * + * The caller must do a scsi_host_put() to drop the reference + * that scsi_host_get() took. The put_device() below dropped + * the reference from class_find_device(). **/ struct Scsi_Host *scsi_host_lookup(unsigned short hostnum) { @@ -463,9 +467,10 @@ struct Scsi_Host *scsi_host_lookup(unsigned short hostnum) struct Scsi_Host *shost = ERR_PTR(-ENXIO); cdev = class_find_device(&shost_class, &hostnum, __scsi_host_match); - if (cdev) + if (cdev) { shost = scsi_host_get(class_to_shost(cdev)); - + put_device(cdev); + } return shost; } EXPORT_SYMBOL(scsi_host_lookup); -- cgit v1.2.3 From f93daa3f7ff4f0cc13acc7452a00feb1c586102a Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 13 Jun 2008 10:38:00 -0400 Subject: [SCSI] dpt_i2o: Add PROC_IA64 define This fixes the following compile failure: drivers/scsi/dpt_i2o.c:83: error: 'PROC_IA64' undeclared here (not in a function) Mark Salyzyn indicated that IA64 must report itself as PROC_INTEL, so I've changed the comment for PROC_INTEL. Signed-off-by: Jeff Mahoney Acked-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/dpt/dptsig.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/dpt/dptsig.h b/drivers/scsi/dpt/dptsig.h index 72c8992fdf21..a6644b332b53 100644 --- a/drivers/scsi/dpt/dptsig.h +++ b/drivers/scsi/dpt/dptsig.h @@ -85,7 +85,7 @@ typedef unsigned int sigINT; /* ------------------------------------------------------------------ */ /* What type of processor the file is meant to run on. */ /* This will let us know whether to read sigWORDs as high/low or low/high. */ -#define PROC_INTEL 0x00 /* Intel 80x86 */ +#define PROC_INTEL 0x00 /* Intel 80x86/ia64 */ #define PROC_MOTOROLA 0x01 /* Motorola 68K */ #define PROC_MIPS4000 0x02 /* MIPS RISC 4000 */ #define PROC_ALPHA 0x03 /* DEC Alpha */ @@ -104,6 +104,7 @@ typedef unsigned int sigINT; #define PROC_486 0x08 /* Intel 80486 */ #define PROC_PENTIUM 0x10 /* Intel 586 aka P5 aka Pentium */ #define PROC_SEXIUM 0x20 /* Intel 686 aka P6 aka Pentium Pro or MMX */ +#define PROC_IA64 0x40 /* Intel IA64 processor */ /* PROC_i960: */ #define PROC_960RX 0x01 /* Intel 80960RC/RD */ -- cgit v1.2.3 From d84050f48ebba73994b93ccf61cea2364dac8d75 Mon Sep 17 00:00:00 2001 From: Luke Browning Date: Thu, 29 May 2008 17:46:10 -0300 Subject: powerpc/spufs: wait for stable spu status in spu_stopped() If the spu is stopping (ie, the SPU_STATUS_RUNNING bit is still set), re-read the register to get the final stopped value. Signed-off-by: Luke Browning Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/run.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index b7493b865812..0046bcfe495a 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -51,14 +51,22 @@ int spu_stopped(struct spu_context *ctx, u32 *stat) u64 dsisr; u32 stopped; - *stat = ctx->ops->status_read(ctx); + stopped = SPU_STATUS_INVALID_INSTR | SPU_STATUS_SINGLE_STEP | + SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP; - if (test_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags)) +top: + *stat = ctx->ops->status_read(ctx); + if (*stat & stopped) { + /* + * If the spu hasn't finished stopping, we need to + * re-read the register to get the stopped value. + */ + if (*stat & SPU_STATUS_RUNNING) + goto top; return 1; + } - stopped = SPU_STATUS_INVALID_INSTR | SPU_STATUS_SINGLE_STEP | - SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP; - if (!(*stat & SPU_STATUS_RUNNING) && (*stat & stopped)) + if (test_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags)) return 1; dsisr = ctx->csa.class_0_dsisr; -- cgit v1.2.3 From 1f64643aa5f5a17f1723f7ea0f17b7a3a8f632b3 Mon Sep 17 00:00:00 2001 From: Luke Browning Date: Thu, 5 Jun 2008 17:30:25 +0800 Subject: powerpc/spufs: remove class_0_dsisr from spu exception handling According to the CBEA, the SPU dsisr is not updated for class 0 exceptions. spu_stopped() is testing the dsisr that was passed to it from the class 0 exception handler, so we return a false positive here. This patch cleans up the interrupt handler and erroneous tests in spu_stopped. It also removes the fields from the csa since it is not needed to process class 0 events. Signed-off-by: Luke Browning Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spu_base.c | 2 -- arch/powerpc/platforms/cell/spufs/run.c | 5 ----- arch/powerpc/xmon/xmon.c | 1 - include/asm-powerpc/spu.h | 1 - include/asm-powerpc/spu_csa.h | 2 +- 5 files changed, 1 insertion(+), 10 deletions(-) diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 70c660121ec4..96b5f0f1c11e 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -324,14 +324,12 @@ spu_irq_class_0(int irq, void *data) stat = spu_int_stat_get(spu, 0) & mask; spu->class_0_pending |= stat; - spu->class_0_dsisr = spu_mfc_dsisr_get(spu); spu->class_0_dar = spu_mfc_dar_get(spu); spin_unlock(&spu->register_lock); spu->stop_callback(spu, 0); spu->class_0_pending = 0; - spu->class_0_dsisr = 0; spu->class_0_dar = 0; spu_int_stat_clear(spu, 0, stat); diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index 0046bcfe495a..f7edba6cb795 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -27,7 +27,6 @@ void spufs_stop_callback(struct spu *spu, int irq) switch(irq) { case 0 : ctx->csa.class_0_pending = spu->class_0_pending; - ctx->csa.class_0_dsisr = spu->class_0_dsisr; ctx->csa.class_0_dar = spu->class_0_dar; break; case 1 : @@ -69,10 +68,6 @@ top: if (test_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags)) return 1; - dsisr = ctx->csa.class_0_dsisr; - if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)) - return 1; - dsisr = ctx->csa.class_1_dsisr; if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)) return 1; diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 1702de9395ee..bfcf70ee8959 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -2844,7 +2844,6 @@ static void dump_spu_fields(struct spu *spu) DUMP_FIELD(spu, "0x%lx", flags); DUMP_FIELD(spu, "%d", class_0_pending); DUMP_FIELD(spu, "0x%lx", class_0_dar); - DUMP_FIELD(spu, "0x%lx", class_0_dsisr); DUMP_FIELD(spu, "0x%lx", class_1_dar); DUMP_FIELD(spu, "0x%lx", class_1_dsisr); DUMP_FIELD(spu, "0x%lx", irqs[0]); diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index 6abead6e681a..99348c1f4cab 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -131,7 +131,6 @@ struct spu { u64 flags; u64 class_0_pending; u64 class_0_dar; - u64 class_0_dsisr; u64 class_1_dar; u64 class_1_dsisr; size_t ls_size; diff --git a/include/asm-powerpc/spu_csa.h b/include/asm-powerpc/spu_csa.h index 129ec148d451..a40fd491250c 100644 --- a/include/asm-powerpc/spu_csa.h +++ b/include/asm-powerpc/spu_csa.h @@ -254,7 +254,7 @@ struct spu_state { u64 spu_chnldata_RW[32]; u32 spu_mailbox_data[4]; u32 pu_mailbox_data[1]; - u64 class_0_dar, class_0_dsisr, class_0_pending; + u64 class_0_dar, class_0_pending; u64 class_1_dar, class_1_dsisr; unsigned long suspend_time; spinlock_t register_lock; -- cgit v1.2.3 From 2c911a14b74fa9cf815a936f310e4fa85bee77ce Mon Sep 17 00:00:00 2001 From: Luke Browning Date: Fri, 13 Jun 2008 14:17:35 +1000 Subject: powerpc/spufs: synchronize interaction between spu exception handling and time slicing Time slicing can occur at the same time as spu exception handling resulting in the wakeup of the wrong thread. This change uses the the spu's register_lock to enforce synchronization between bind/unbind and spu exception handling so that they are mutually exclusive. Signed-off-by: Luke Browning Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spu_base.c | 42 +++++++++++++++++++------------ arch/powerpc/platforms/cell/spufs/sched.c | 14 ++++++++--- 2 files changed, 37 insertions(+), 19 deletions(-) diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 96b5f0f1c11e..78f905bc6a42 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -219,15 +219,25 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea) extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); //XXX static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr) { + int ret; + pr_debug("%s, %lx, %lx\n", __func__, dsisr, ea); - /* Handle kernel space hash faults immediately. - User hash faults need to be deferred to process context. */ - if ((dsisr & MFC_DSISR_PTE_NOT_FOUND) - && REGION_ID(ea) != USER_REGION_ID - && hash_page(ea, _PAGE_PRESENT, 0x300) == 0) { - spu_restart_dma(spu); - return 0; + /* + * Handle kernel space hash faults immediately. User hash + * faults need to be deferred to process context. + */ + if ((dsisr & MFC_DSISR_PTE_NOT_FOUND) && + (REGION_ID(ea) != USER_REGION_ID)) { + + spin_unlock(&spu->register_lock); + ret = hash_page(ea, _PAGE_PRESENT, 0x300); + spin_lock(&spu->register_lock); + + if (!ret) { + spu_restart_dma(spu); + return 0; + } } spu->class_1_dar = ea; @@ -325,14 +335,12 @@ spu_irq_class_0(int irq, void *data) spu->class_0_pending |= stat; spu->class_0_dar = spu_mfc_dar_get(spu); - spin_unlock(&spu->register_lock); - spu->stop_callback(spu, 0); - spu->class_0_pending = 0; spu->class_0_dar = 0; spu_int_stat_clear(spu, 0, stat); + spin_unlock(&spu->register_lock); return IRQ_HANDLED; } @@ -355,13 +363,12 @@ spu_irq_class_1(int irq, void *data) spu_mfc_dsisr_set(spu, 0ul); spu_int_stat_clear(spu, 1, stat); - if (stat & CLASS1_SEGMENT_FAULT_INTR) - __spu_trap_data_seg(spu, dar); - - spin_unlock(&spu->register_lock); pr_debug("%s: %lx %lx %lx %lx\n", __func__, mask, stat, dar, dsisr); + if (stat & CLASS1_SEGMENT_FAULT_INTR) + __spu_trap_data_seg(spu, dar); + if (stat & CLASS1_STORAGE_FAULT_INTR) __spu_trap_data_map(spu, dar, dsisr); @@ -374,6 +381,8 @@ spu_irq_class_1(int irq, void *data) spu->class_1_dsisr = 0; spu->class_1_dar = 0; + spin_unlock(&spu->register_lock); + return stat ? IRQ_HANDLED : IRQ_NONE; } @@ -392,14 +401,12 @@ spu_irq_class_2(int irq, void *data) mask = spu_int_mask_get(spu, 2); /* ignore interrupts we're not waiting for */ stat &= mask; - /* mailbox interrupts are level triggered. mask them now before * acknowledging */ if (stat & mailbox_intrs) spu_int_mask_and(spu, 2, ~(stat & mailbox_intrs)); /* acknowledge all interrupts before the callbacks */ spu_int_stat_clear(spu, 2, stat); - spin_unlock(&spu->register_lock); pr_debug("class 2 interrupt %d, %lx, %lx\n", irq, stat, mask); @@ -419,6 +426,9 @@ spu_irq_class_2(int irq, void *data) spu->wbox_callback(spu); spu->stats.class2_intr++; + + spin_unlock(&spu->register_lock); + return stat ? IRQ_HANDLED : IRQ_NONE; } diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 745dd51ec37f..cd725670b1b5 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -230,19 +230,23 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx) ctx->stats.slb_flt_base = spu->stats.slb_flt; ctx->stats.class2_intr_base = spu->stats.class2_intr; + spu_associate_mm(spu, ctx->owner); + + spin_lock_irq(&spu->register_lock); spu->ctx = ctx; spu->flags = 0; ctx->spu = spu; ctx->ops = &spu_hw_ops; spu->pid = current->pid; spu->tgid = current->tgid; - spu_associate_mm(spu, ctx->owner); spu->ibox_callback = spufs_ibox_callback; spu->wbox_callback = spufs_wbox_callback; spu->stop_callback = spufs_stop_callback; spu->mfc_callback = spufs_mfc_callback; - mb(); + spin_unlock_irq(&spu->register_lock); + spu_unmap_mappings(ctx); + spu_switch_log_notify(spu, ctx, SWITCH_LOG_START, 0); spu_restore(&ctx->csa, spu); spu->timestamp = jiffies; @@ -423,18 +427,22 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx) spu_unmap_mappings(ctx); spu_save(&ctx->csa, spu); spu_switch_log_notify(spu, ctx, SWITCH_LOG_STOP, 0); + + spin_lock_irq(&spu->register_lock); spu->timestamp = jiffies; ctx->state = SPU_STATE_SAVED; spu->ibox_callback = NULL; spu->wbox_callback = NULL; spu->stop_callback = NULL; spu->mfc_callback = NULL; - spu_associate_mm(spu, NULL); spu->pid = 0; spu->tgid = 0; ctx->ops = &spu_backing_ops; spu->flags = 0; spu->ctx = NULL; + spin_unlock_irq(&spu->register_lock); + + spu_associate_mm(spu, NULL); ctx->stats.slb_flt += (spu->stats.slb_flt - ctx->stats.slb_flt_base); -- cgit v1.2.3 From 028fda0a6c80c26f1d9f403b4490b9ddc74ffa3b Mon Sep 17 00:00:00 2001 From: Luke Browning Date: Mon, 16 Jun 2008 10:42:38 +1000 Subject: powerpc/spufs: fix missed stop-and-signal event There is a delay in the transition to the stopped state for class 2 interrupts. In some cases, the controlling thread detects the state of the spu as running, and goes back to sleep resulting in a hung application as the event is missed. This change detects the stop condition and re-generates the wakeup event after a context save. Signed-off-by: Luke Browning Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/sched.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index cd725670b1b5..e929e70a84e3 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -407,6 +407,8 @@ static int has_affinity(struct spu_context *ctx) */ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx) { + u32 status; + spu_context_trace(spu_unbind_context__enter, ctx, spu); spuctx_switch_state(ctx, SPU_UTIL_SYSTEM); @@ -452,6 +454,9 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx) /* This maps the underlying spu state to idle */ spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED); ctx->spu = NULL; + + if (spu_stopped(ctx, &status)) + wake_up_all(&ctx->stop_wq); } /** -- cgit v1.2.3 From 598056d5af8fef1dbe8f96f5c2b641a528184e5a Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 22 May 2008 00:10:56 +1000 Subject: [POWERPC] Fix rmb to order cacheable vs. noncacheable lwsync is explicitly defined not to have any effect on the ordering of accesses to device memory, so it cannot be used for rmb(). sync appears to be the only barrier which fits the bill. Signed-off-by: Nick Piggin Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/system.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h index 2b6559a6d113..5235f875b932 100644 --- a/include/asm-powerpc/system.h +++ b/include/asm-powerpc/system.h @@ -34,7 +34,7 @@ * SMP since it is only used to order updates to system memory. */ #define mb() __asm__ __volatile__ ("sync" : : : "memory") -#define rmb() __asm__ __volatile__ (__stringify(LWSYNC) : : : "memory") +#define rmb() __asm__ __volatile__ ("sync" : : : "memory") #define wmb() __asm__ __volatile__ ("sync" : : : "memory") #define read_barrier_depends() do { } while(0) -- cgit v1.2.3 From 476ff8a0e3b17fc23994255aa9fd917d599d2ec7 Mon Sep 17 00:00:00 2001 From: Emil Medve Date: Fri, 23 May 2008 05:49:22 +1000 Subject: [POWERPC] Fix return value check logic in debugfs virq_mapping setup debugfs_create_file() returns a non-NULL (non-zero) value in case of success, not a NULL value. This fixes this non-critical boot-time debugging error message: [ 1.316386] calling irq_debugfs_init+0x0/0x50 [ 1.316399] initcall irq_debugfs_init+0x0/0x50 returned -12 after 0 msecs [ 1.316411] initcall irq_debugfs_init+0x0/0x50 returned with error code -12 Signed-off-by: Emil Medve Acked-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 2f73f705d564..bcc249d90c4d 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -1073,7 +1073,7 @@ static const struct file_operations virq_debug_fops = { static int __init irq_debugfs_init(void) { if (debugfs_create_file("virq_mapping", S_IRUGO, powerpc_debugfs_root, - NULL, &virq_debug_fops)) + NULL, &virq_debug_fops) == NULL) return -ENOMEM; return 0; -- cgit v1.2.3 From bad5232ba266ae2c666c17be236152fb2d8ada3b Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 9 Jun 2008 22:20:04 +1000 Subject: [POWERPC] Add missing of_node_put in pseries/nvram.c of_node_put is needed before discarding a value received from of_find_node_by_type, eg in error handling code. The semantic patch that makes the change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ struct device_node *n; struct device_node *n1; struct device_node *n2; statement S; identifier f1,f2; expression E1,E2; constant C; @@ n = of_find_node_by_type(...) ... if (!n) S ... when != of_node_put(n) when != n1 = f1(n,...) when != E1 = n when any when strict ( + of_node_put(n); return -C; | of_node_put(n); | n2 = f2(n,...) | E2 = n | return ...; ) // Signed-off-by: Julia Lawall Acked-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/nvram.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c index f68903e15bd5..42f7e384e6c4 100644 --- a/arch/powerpc/platforms/pseries/nvram.c +++ b/arch/powerpc/platforms/pseries/nvram.c @@ -131,8 +131,10 @@ int __init pSeries_nvram_init(void) return -ENODEV; nbytes_p = of_get_property(nvram, "#bytes", &proplen); - if (nbytes_p == NULL || proplen != sizeof(unsigned int)) + if (nbytes_p == NULL || proplen != sizeof(unsigned int)) { + of_node_put(nvram); return -EIO; + } nvram_size = *nbytes_p; -- cgit v1.2.3 From 8b9dba2ce28f64246198704b23f133bed5429e62 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 9 Jun 2008 22:20:42 +1000 Subject: [POWERPC] Add missing of_node_put in drivers/macintosh/smu.c of_node_put is needed before discarding a value received from of_find_node_by_type, eg in error handling code. The semantic patch that makes the change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ struct device_node *n; struct device_node *n1; struct device_node *n2; statement S; identifier f1,f2; expression E1,E2; constant C; @@ n = of_find_node_by_type(...) ... if (!n) S ... when != of_node_put(n) when != n1 = f1(n,...) when != E1 = n when any when strict ( + of_node_put(n); return -C; | of_node_put(n); | n2 = f2(n,...) | E2 = n | return ...; ) // Signed-off-by: Julia Lawall Acked-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- drivers/macintosh/smu.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c index 77ad192962c5..d86d57af282a 100644 --- a/drivers/macintosh/smu.c +++ b/drivers/macintosh/smu.c @@ -483,12 +483,15 @@ int __init smu_init (void) if (smu_cmdbuf_abs == 0) { printk(KERN_ERR "SMU: Command buffer not allocated !\n"); + of_node_put(np); return -EINVAL; } smu = alloc_bootmem(sizeof(struct smu_device)); - if (smu == NULL) + if (smu == NULL) { + of_node_put(np); return -ENOMEM; + } memset(smu, 0, sizeof(*smu)); spin_lock_init(&smu->lock); -- cgit v1.2.3 From 958a65f205fdc5ce5461d79376073b89acc51b31 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 9 Jun 2008 22:21:51 +1000 Subject: [POWERPC] Add missing of_node_put in drivers/macintosh/therm_adt746x.c of_node_put is needed before discarding a value received from of_find_node_by_name, eg in error handling code. The semantic patch that makes the change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ struct device_node *n; struct device_node *n1; statement S; identifier f; expression E; constant C; @@ n = of_find_node_by_name(...) ... if (!n) S ... when != of_node_put(n) when != n1 = f(n,...) when != E = n when any when strict ( + of_node_put(n); return -C; | of_node_put(n); | n1 = f(n,...) | E = n | return ...; ) // Signed-off-by: Julia Lawall Acked-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- drivers/macintosh/therm_adt746x.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c index 54f4942a2968..5366dc93fb38 100644 --- a/drivers/macintosh/therm_adt746x.c +++ b/drivers/macintosh/therm_adt746x.c @@ -562,18 +562,24 @@ thermostat_init(void) therm_type = ADT7460; else if (of_device_is_compatible(np, "adt7467")) therm_type = ADT7467; - else + else { + of_node_put(np); return -ENODEV; + } prop = of_get_property(np, "hwsensor-params-version", NULL); printk(KERN_INFO "adt746x: version %d (%ssupported)\n", *prop, (*prop == 1)?"":"un"); - if (*prop != 1) + if (*prop != 1) { + of_node_put(np); return -ENODEV; + } prop = of_get_property(np, "reg", NULL); - if (!prop) + if (!prop) { + of_node_put(np); return -ENODEV; + } /* look for bus either by path or using "reg" */ if (strstr(np->full_name, "/i2c-bus@") != NULL) { @@ -610,6 +616,7 @@ thermostat_init(void) if (of_dev == NULL) { printk(KERN_ERR "Can't register temperatures device !\n"); + of_node_put(np); return -ENODEV; } -- cgit v1.2.3 From 8e01520c06c65a1a376059199fc24d4f3d606991 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 10 Jun 2008 09:26:10 +1000 Subject: [POWERPC] Fix warning in pseries/eeh_driver.c Fix this: /usr/src/devel/arch/powerpc/platforms/pseries/eeh_driver.c: In function 'print_device_node_tree': /usr/src/devel/arch/powerpc/platforms/pseries/eeh_driver.c:55: warning: ISO C90 forbids mixed declarations and code also make that function look like it's part of Linux. Signed-off-by: Andrew Morton Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/eeh_driver.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c index 68ea5eee39a8..8c1ca477c52c 100644 --- a/arch/powerpc/platforms/pseries/eeh_driver.c +++ b/arch/powerpc/platforms/pseries/eeh_driver.c @@ -42,17 +42,20 @@ static inline const char * pcid_name (struct pci_dev *pdev) } #ifdef DEBUG -static void print_device_node_tree (struct pci_dn *pdn, int dent) +static void print_device_node_tree(struct pci_dn *pdn, int dent) { int i; - if (!pdn) return; - for (i=0;inode->name, pdn->eeh_mode, pdn->eeh_config_addr, pdn->eeh_pe_config_addr, pdn->node->full_name); dent += 3; - struct device_node *pc = pdn->node->child; + pc = pdn->node->child; while (pc) { print_device_node_tree(PCI_DN(pc), dent); pc = pc->sibling; -- cgit v1.2.3 From 305c73687157d677bee6f2a5dbee438d844a028c Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 11 Jun 2008 03:47:45 +1000 Subject: [POWERPC] Build fix for drivers/macintosh/mediabay.c This fixes the following build error with CONFIG_BLK_DEV_IDE_PMAC=n: <-- snip --> ... CC drivers/macintosh/mediabay.o /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/macintosh/mediabay.c: In function 'check_media_bay': /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/macintosh/mediabay.c:428: error: 'struct media_bay_info' has no member named 'cd_index' make[3]: *** [drivers/macintosh/mediabay.o] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Paul Mackerras --- drivers/macintosh/mediabay.c | 4 ++-- include/asm-powerpc/mediabay.h | 12 ++++++++++-- 2 files changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c index c34bdf852e32..818aba368541 100644 --- a/drivers/macintosh/mediabay.c +++ b/drivers/macintosh/mediabay.c @@ -84,7 +84,7 @@ struct media_bay_info { int cd_irq; int cd_retry; #endif -#if defined(CONFIG_BLK_DEV_IDE_PMAC) || defined(CONFIG_MAC_FLOPPY) +#if defined(CONFIG_BLK_DEV_IDE_PMAC) int cd_index; #endif }; @@ -417,6 +417,7 @@ static void poll_media_bay(struct media_bay_info* bay) } } +#ifdef CONFIG_BLK_DEV_IDE_PMAC int check_media_bay(struct device_node *which_bay, int what) { int i; @@ -432,7 +433,6 @@ int check_media_bay(struct device_node *which_bay, int what) } EXPORT_SYMBOL(check_media_bay); -#ifdef CONFIG_BLK_DEV_IDE_PMAC int check_media_bay_by_base(unsigned long base, int what) { int i; diff --git a/include/asm-powerpc/mediabay.h b/include/asm-powerpc/mediabay.h index df111c362a7f..b2efb3325808 100644 --- a/include/asm-powerpc/mediabay.h +++ b/include/asm-powerpc/mediabay.h @@ -17,8 +17,6 @@ #define MB_POWER 6 /* media bay contains a Power device (???) */ #define MB_NO 7 /* media bay contains nothing */ -int check_media_bay(struct device_node *which_bay, int what); - /* Number of bays in the machine or 0 */ extern int media_bay_count; @@ -29,6 +27,16 @@ int check_media_bay_by_base(unsigned long base, int what); /* called by IDE PMAC host driver to register IDE controller for media bay */ int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base, int irq, ide_hwif_t *hwif); + +int check_media_bay(struct device_node *which_bay, int what); + +#else + +static inline int check_media_bay(struct device_node *which_bay, int what) +{ + return -ENODEV; +} + #endif #endif /* __KERNEL__ */ -- cgit v1.2.3 From 143580ecfb7999147e546cc3814023e233e95fa5 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 13 Jun 2008 07:19:06 +1000 Subject: [POWERPC] Fix bootwrapper builds with newer gcc versions GCC 4.4.x looks to be adding support for generating out-of-line register saves/restores based on: http://gcc.gnu.org/ml/gcc-patches/2008-04/msg01678.html This breaks the bootwrapper as we'd need to link with libgcc to get the implementation of the register save/restores. To workaround this issue, we just stole the save/restore code from gcc and simplified it down for our needs (integer only). Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/boot/Makefile | 2 +- arch/powerpc/boot/crtsavres.S | 233 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 234 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/boot/crtsavres.S diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index d53b84e761a9..1cee2f9fdf06 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -51,7 +51,7 @@ $(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \ $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader)) src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c -src-wlib := string.S crt0.S stdio.c main.c \ +src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \ $(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \ ns16550.c serial.c simple_alloc.c div64.S util.S \ gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \ diff --git a/arch/powerpc/boot/crtsavres.S b/arch/powerpc/boot/crtsavres.S new file mode 100644 index 000000000000..f3d9b35c07d4 --- /dev/null +++ b/arch/powerpc/boot/crtsavres.S @@ -0,0 +1,233 @@ +/* + * Special support for eabi and SVR4 + * + * Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc. + * Copyright 2008 Freescale Semiconductor, Inc. + * Written By Michael Meissner + * + * Based on gcc/config/rs6000/crtsavres.asm from gcc + * + * This file is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * In addition to the permissions in the GNU General Public License, the + * Free Software Foundation gives you unlimited permission to link the + * compiled version of this file with other programs, and to distribute + * those programs without any restriction coming from the use of this + * file. (The General Public License restrictions do apply in other + * respects; for example, they cover modification of the file, and + * distribution when not linked into another program.) + * + * This file is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + * As a special exception, if you link this library with files + * compiled with GCC to produce an executable, this does not cause + * the resulting executable to be covered by the GNU General Public License. + * This exception does not however invalidate any other reasons why + * the executable file might be covered by the GNU General Public License. + */ + + .file "crtsavres.S" + .section ".text" + +/* On PowerPC64 Linux, these functions are provided by the linker. */ +#ifndef __powerpc64__ + +#define _GLOBAL(name) \ + .type name,@function; \ + .globl name; \ +name: + +/* Routines for saving integer registers, called by the compiler. */ +/* Called with r11 pointing to the stack header word of the caller of the */ +/* function, just beyond the end of the integer save area. */ + +_GLOBAL(_savegpr_14) +_GLOBAL(_save32gpr_14) + stw 14,-72(11) /* save gp registers */ +_GLOBAL(_savegpr_15) +_GLOBAL(_save32gpr_15) + stw 15,-68(11) +_GLOBAL(_savegpr_16) +_GLOBAL(_save32gpr_16) + stw 16,-64(11) +_GLOBAL(_savegpr_17) +_GLOBAL(_save32gpr_17) + stw 17,-60(11) +_GLOBAL(_savegpr_18) +_GLOBAL(_save32gpr_18) + stw 18,-56(11) +_GLOBAL(_savegpr_19) +_GLOBAL(_save32gpr_19) + stw 19,-52(11) +_GLOBAL(_savegpr_20) +_GLOBAL(_save32gpr_20) + stw 20,-48(11) +_GLOBAL(_savegpr_21) +_GLOBAL(_save32gpr_21) + stw 21,-44(11) +_GLOBAL(_savegpr_22) +_GLOBAL(_save32gpr_22) + stw 22,-40(11) +_GLOBAL(_savegpr_23) +_GLOBAL(_save32gpr_23) + stw 23,-36(11) +_GLOBAL(_savegpr_24) +_GLOBAL(_save32gpr_24) + stw 24,-32(11) +_GLOBAL(_savegpr_25) +_GLOBAL(_save32gpr_25) + stw 25,-28(11) +_GLOBAL(_savegpr_26) +_GLOBAL(_save32gpr_26) + stw 26,-24(11) +_GLOBAL(_savegpr_27) +_GLOBAL(_save32gpr_27) + stw 27,-20(11) +_GLOBAL(_savegpr_28) +_GLOBAL(_save32gpr_28) + stw 28,-16(11) +_GLOBAL(_savegpr_29) +_GLOBAL(_save32gpr_29) + stw 29,-12(11) +_GLOBAL(_savegpr_30) +_GLOBAL(_save32gpr_30) + stw 30,-8(11) +_GLOBAL(_savegpr_31) +_GLOBAL(_save32gpr_31) + stw 31,-4(11) + blr + +/* Routines for restoring integer registers, called by the compiler. */ +/* Called with r11 pointing to the stack header word of the caller of the */ +/* function, just beyond the end of the integer restore area. */ + +_GLOBAL(_restgpr_14) +_GLOBAL(_rest32gpr_14) + lwz 14,-72(11) /* restore gp registers */ +_GLOBAL(_restgpr_15) +_GLOBAL(_rest32gpr_15) + lwz 15,-68(11) +_GLOBAL(_restgpr_16) +_GLOBAL(_rest32gpr_16) + lwz 16,-64(11) +_GLOBAL(_restgpr_17) +_GLOBAL(_rest32gpr_17) + lwz 17,-60(11) +_GLOBAL(_restgpr_18) +_GLOBAL(_rest32gpr_18) + lwz 18,-56(11) +_GLOBAL(_restgpr_19) +_GLOBAL(_rest32gpr_19) + lwz 19,-52(11) +_GLOBAL(_restgpr_20) +_GLOBAL(_rest32gpr_20) + lwz 20,-48(11) +_GLOBAL(_restgpr_21) +_GLOBAL(_rest32gpr_21) + lwz 21,-44(11) +_GLOBAL(_restgpr_22) +_GLOBAL(_rest32gpr_22) + lwz 22,-40(11) +_GLOBAL(_restgpr_23) +_GLOBAL(_rest32gpr_23) + lwz 23,-36(11) +_GLOBAL(_restgpr_24) +_GLOBAL(_rest32gpr_24) + lwz 24,-32(11) +_GLOBAL(_restgpr_25) +_GLOBAL(_rest32gpr_25) + lwz 25,-28(11) +_GLOBAL(_restgpr_26) +_GLOBAL(_rest32gpr_26) + lwz 26,-24(11) +_GLOBAL(_restgpr_27) +_GLOBAL(_rest32gpr_27) + lwz 27,-20(11) +_GLOBAL(_restgpr_28) +_GLOBAL(_rest32gpr_28) + lwz 28,-16(11) +_GLOBAL(_restgpr_29) +_GLOBAL(_rest32gpr_29) + lwz 29,-12(11) +_GLOBAL(_restgpr_30) +_GLOBAL(_rest32gpr_30) + lwz 30,-8(11) +_GLOBAL(_restgpr_31) +_GLOBAL(_rest32gpr_31) + lwz 31,-4(11) + blr + +/* Routines for restoring integer registers, called by the compiler. */ +/* Called with r11 pointing to the stack header word of the caller of the */ +/* function, just beyond the end of the integer restore area. */ + +_GLOBAL(_restgpr_14_x) +_GLOBAL(_rest32gpr_14_x) + lwz 14,-72(11) /* restore gp registers */ +_GLOBAL(_restgpr_15_x) +_GLOBAL(_rest32gpr_15_x) + lwz 15,-68(11) +_GLOBAL(_restgpr_16_x) +_GLOBAL(_rest32gpr_16_x) + lwz 16,-64(11) +_GLOBAL(_restgpr_17_x) +_GLOBAL(_rest32gpr_17_x) + lwz 17,-60(11) +_GLOBAL(_restgpr_18_x) +_GLOBAL(_rest32gpr_18_x) + lwz 18,-56(11) +_GLOBAL(_restgpr_19_x) +_GLOBAL(_rest32gpr_19_x) + lwz 19,-52(11) +_GLOBAL(_restgpr_20_x) +_GLOBAL(_rest32gpr_20_x) + lwz 20,-48(11) +_GLOBAL(_restgpr_21_x) +_GLOBAL(_rest32gpr_21_x) + lwz 21,-44(11) +_GLOBAL(_restgpr_22_x) +_GLOBAL(_rest32gpr_22_x) + lwz 22,-40(11) +_GLOBAL(_restgpr_23_x) +_GLOBAL(_rest32gpr_23_x) + lwz 23,-36(11) +_GLOBAL(_restgpr_24_x) +_GLOBAL(_rest32gpr_24_x) + lwz 24,-32(11) +_GLOBAL(_restgpr_25_x) +_GLOBAL(_rest32gpr_25_x) + lwz 25,-28(11) +_GLOBAL(_restgpr_26_x) +_GLOBAL(_rest32gpr_26_x) + lwz 26,-24(11) +_GLOBAL(_restgpr_27_x) +_GLOBAL(_rest32gpr_27_x) + lwz 27,-20(11) +_GLOBAL(_restgpr_28_x) +_GLOBAL(_rest32gpr_28_x) + lwz 28,-16(11) +_GLOBAL(_restgpr_29_x) +_GLOBAL(_rest32gpr_29_x) + lwz 29,-12(11) +_GLOBAL(_restgpr_30_x) +_GLOBAL(_rest32gpr_30_x) + lwz 30,-8(11) +_GLOBAL(_restgpr_31_x) +_GLOBAL(_rest32gpr_31_x) + lwz 0,4(11) + lwz 31,-4(11) + mtlr 0 + mr 1,11 + blr +#endif -- cgit v1.2.3 From da3de6df33f5f42ff9dc40093fbc884f524c9a49 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 13 Jun 2008 07:20:58 +1000 Subject: [POWERPC] Fix -Os kernel builds with newer gcc versions GCC 4.4.x looks to be adding support for generating out-of-line register saves/restores based on: http://gcc.gnu.org/ml/gcc-patches/2008-04/msg01678.html This breaks the kernel if we enable CONFIG_CC_OPTIMIZE_FOR_SIZE. To fix this we add the use the save/restore code from gcc and simplified it down for our needs (integer only). Additionally, we have to link this code into each module. The other solution was to add EXPORT_SYMBOL() which meant going through the trampoline which seemed nonsensical for these out-of-line routines. Finally, we add some checks to prom_init_check.sh to ignore the out-of-line save/restore functions. Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/Makefile | 2 + arch/powerpc/kernel/prom_init_check.sh | 14 ++ arch/powerpc/lib/Makefile | 2 +- arch/powerpc/lib/crtsavres.S | 229 +++++++++++++++++++++++++++++++++ 4 files changed, 246 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/lib/crtsavres.S diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 86096ccc5914..b7d4c4ce2fe6 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -96,6 +96,8 @@ endif else KBUILD_CFLAGS += $(call cc-option,-mtune=power4) endif +else +LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o endif ifeq ($(CONFIG_TUNE_CELL),y) diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh index 31729a9387df..2c7e8e87f770 100644 --- a/arch/powerpc/kernel/prom_init_check.sh +++ b/arch/powerpc/kernel/prom_init_check.sh @@ -48,6 +48,20 @@ do fi done + # ignore register save/restore funcitons + if [ "${UNDEF:0:9}" = "_restgpr_" ]; then + OK=1 + fi + if [ "${UNDEF:0:11}" = "_rest32gpr_" ]; then + OK=1 + fi + if [ "${UNDEF:0:9}" = "_savegpr_" ]; then + OK=1 + fi + if [ "${UNDEF:0:11}" = "_save32gpr_" ]; then + OK=1 + fi + if [ $OK -eq 0 ]; then ERROR=1 echo "Error: External symbol '$UNDEF' referenced" \ diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index c71d37dc6a88..e522b06cc42f 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -9,7 +9,7 @@ endif ifeq ($(CONFIG_PPC_MERGE),y) obj-y := string.o alloc.o \ checksum_$(CONFIG_WORD_SIZE).o -obj-$(CONFIG_PPC32) += div64.o copy_32.o +obj-$(CONFIG_PPC32) += div64.o copy_32.o crtsavres.o obj-$(CONFIG_HAS_IOMEM) += devres.o endif diff --git a/arch/powerpc/lib/crtsavres.S b/arch/powerpc/lib/crtsavres.S new file mode 100644 index 000000000000..70a9cd8a3008 --- /dev/null +++ b/arch/powerpc/lib/crtsavres.S @@ -0,0 +1,229 @@ +/* + * Special support for eabi and SVR4 + * + * Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc. + * Copyright 2008 Freescale Semiconductor, Inc. + * Written By Michael Meissner + * + * Based on gcc/config/rs6000/crtsavres.asm from gcc + * + * This file is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * In addition to the permissions in the GNU General Public License, the + * Free Software Foundation gives you unlimited permission to link the + * compiled version of this file with other programs, and to distribute + * those programs without any restriction coming from the use of this + * file. (The General Public License restrictions do apply in other + * respects; for example, they cover modification of the file, and + * distribution when not linked into another program.) + * + * This file is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + * As a special exception, if you link this library with files + * compiled with GCC to produce an executable, this does not cause + * the resulting executable to be covered by the GNU General Public License. + * This exception does not however invalidate any other reasons why + * the executable file might be covered by the GNU General Public License. + */ + +#include + + .file "crtsavres.S" + .section ".text" + +#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE + +/* Routines for saving integer registers, called by the compiler. */ +/* Called with r11 pointing to the stack header word of the caller of the */ +/* function, just beyond the end of the integer save area. */ + +_GLOBAL(_savegpr_14) +_GLOBAL(_save32gpr_14) + stw 14,-72(11) /* save gp registers */ +_GLOBAL(_savegpr_15) +_GLOBAL(_save32gpr_15) + stw 15,-68(11) +_GLOBAL(_savegpr_16) +_GLOBAL(_save32gpr_16) + stw 16,-64(11) +_GLOBAL(_savegpr_17) +_GLOBAL(_save32gpr_17) + stw 17,-60(11) +_GLOBAL(_savegpr_18) +_GLOBAL(_save32gpr_18) + stw 18,-56(11) +_GLOBAL(_savegpr_19) +_GLOBAL(_save32gpr_19) + stw 19,-52(11) +_GLOBAL(_savegpr_20) +_GLOBAL(_save32gpr_20) + stw 20,-48(11) +_GLOBAL(_savegpr_21) +_GLOBAL(_save32gpr_21) + stw 21,-44(11) +_GLOBAL(_savegpr_22) +_GLOBAL(_save32gpr_22) + stw 22,-40(11) +_GLOBAL(_savegpr_23) +_GLOBAL(_save32gpr_23) + stw 23,-36(11) +_GLOBAL(_savegpr_24) +_GLOBAL(_save32gpr_24) + stw 24,-32(11) +_GLOBAL(_savegpr_25) +_GLOBAL(_save32gpr_25) + stw 25,-28(11) +_GLOBAL(_savegpr_26) +_GLOBAL(_save32gpr_26) + stw 26,-24(11) +_GLOBAL(_savegpr_27) +_GLOBAL(_save32gpr_27) + stw 27,-20(11) +_GLOBAL(_savegpr_28) +_GLOBAL(_save32gpr_28) + stw 28,-16(11) +_GLOBAL(_savegpr_29) +_GLOBAL(_save32gpr_29) + stw 29,-12(11) +_GLOBAL(_savegpr_30) +_GLOBAL(_save32gpr_30) + stw 30,-8(11) +_GLOBAL(_savegpr_31) +_GLOBAL(_save32gpr_31) + stw 31,-4(11) + blr + +/* Routines for restoring integer registers, called by the compiler. */ +/* Called with r11 pointing to the stack header word of the caller of the */ +/* function, just beyond the end of the integer restore area. */ + +_GLOBAL(_restgpr_14) +_GLOBAL(_rest32gpr_14) + lwz 14,-72(11) /* restore gp registers */ +_GLOBAL(_restgpr_15) +_GLOBAL(_rest32gpr_15) + lwz 15,-68(11) +_GLOBAL(_restgpr_16) +_GLOBAL(_rest32gpr_16) + lwz 16,-64(11) +_GLOBAL(_restgpr_17) +_GLOBAL(_rest32gpr_17) + lwz 17,-60(11) +_GLOBAL(_restgpr_18) +_GLOBAL(_rest32gpr_18) + lwz 18,-56(11) +_GLOBAL(_restgpr_19) +_GLOBAL(_rest32gpr_19) + lwz 19,-52(11) +_GLOBAL(_restgpr_20) +_GLOBAL(_rest32gpr_20) + lwz 20,-48(11) +_GLOBAL(_restgpr_21) +_GLOBAL(_rest32gpr_21) + lwz 21,-44(11) +_GLOBAL(_restgpr_22) +_GLOBAL(_rest32gpr_22) + lwz 22,-40(11) +_GLOBAL(_restgpr_23) +_GLOBAL(_rest32gpr_23) + lwz 23,-36(11) +_GLOBAL(_restgpr_24) +_GLOBAL(_rest32gpr_24) + lwz 24,-32(11) +_GLOBAL(_restgpr_25) +_GLOBAL(_rest32gpr_25) + lwz 25,-28(11) +_GLOBAL(_restgpr_26) +_GLOBAL(_rest32gpr_26) + lwz 26,-24(11) +_GLOBAL(_restgpr_27) +_GLOBAL(_rest32gpr_27) + lwz 27,-20(11) +_GLOBAL(_restgpr_28) +_GLOBAL(_rest32gpr_28) + lwz 28,-16(11) +_GLOBAL(_restgpr_29) +_GLOBAL(_rest32gpr_29) + lwz 29,-12(11) +_GLOBAL(_restgpr_30) +_GLOBAL(_rest32gpr_30) + lwz 30,-8(11) +_GLOBAL(_restgpr_31) +_GLOBAL(_rest32gpr_31) + lwz 31,-4(11) + blr + +/* Routines for restoring integer registers, called by the compiler. */ +/* Called with r11 pointing to the stack header word of the caller of the */ +/* function, just beyond the end of the integer restore area. */ + +_GLOBAL(_restgpr_14_x) +_GLOBAL(_rest32gpr_14_x) + lwz 14,-72(11) /* restore gp registers */ +_GLOBAL(_restgpr_15_x) +_GLOBAL(_rest32gpr_15_x) + lwz 15,-68(11) +_GLOBAL(_restgpr_16_x) +_GLOBAL(_rest32gpr_16_x) + lwz 16,-64(11) +_GLOBAL(_restgpr_17_x) +_GLOBAL(_rest32gpr_17_x) + lwz 17,-60(11) +_GLOBAL(_restgpr_18_x) +_GLOBAL(_rest32gpr_18_x) + lwz 18,-56(11) +_GLOBAL(_restgpr_19_x) +_GLOBAL(_rest32gpr_19_x) + lwz 19,-52(11) +_GLOBAL(_restgpr_20_x) +_GLOBAL(_rest32gpr_20_x) + lwz 20,-48(11) +_GLOBAL(_restgpr_21_x) +_GLOBAL(_rest32gpr_21_x) + lwz 21,-44(11) +_GLOBAL(_restgpr_22_x) +_GLOBAL(_rest32gpr_22_x) + lwz 22,-40(11) +_GLOBAL(_restgpr_23_x) +_GLOBAL(_rest32gpr_23_x) + lwz 23,-36(11) +_GLOBAL(_restgpr_24_x) +_GLOBAL(_rest32gpr_24_x) + lwz 24,-32(11) +_GLOBAL(_restgpr_25_x) +_GLOBAL(_rest32gpr_25_x) + lwz 25,-28(11) +_GLOBAL(_restgpr_26_x) +_GLOBAL(_rest32gpr_26_x) + lwz 26,-24(11) +_GLOBAL(_restgpr_27_x) +_GLOBAL(_rest32gpr_27_x) + lwz 27,-20(11) +_GLOBAL(_restgpr_28_x) +_GLOBAL(_rest32gpr_28_x) + lwz 28,-16(11) +_GLOBAL(_restgpr_29_x) +_GLOBAL(_rest32gpr_29_x) + lwz 29,-12(11) +_GLOBAL(_restgpr_30_x) +_GLOBAL(_rest32gpr_30_x) + lwz 30,-8(11) +_GLOBAL(_restgpr_31_x) +_GLOBAL(_rest32gpr_31_x) + lwz 0,4(11) + lwz 31,-4(11) + mtlr 0 + mr 1,11 + blr +#endif -- cgit v1.2.3 From 4a96db3c780f30432653f99cbff193ba3e474e0b Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 16 Jun 2008 10:50:13 +1000 Subject: [POWERPC] Remove ppc32's export of console_drivers There are no in-tree uses of the export any more and in linux-next there is a change that exports it globally which causes warnings: WARNING: vmlinux: 'console_drivers' exported twice. Previous export was in vmlinux and in one case (mpc85xx_defconfig) a build error: kernel/built-in.o: In function `__crc_console_drivers': (*ABS*+0x1eb0e6f5): multiple definition of `__crc_console_drivers' So remove the export now. Also, there is no longer any need to include linux/console.h. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/ppc_ksyms.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index cf6b5a7d8b3f..d3ac631cbd26 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include @@ -160,7 +159,6 @@ EXPORT_SYMBOL(screen_info); EXPORT_SYMBOL(timer_interrupt); EXPORT_SYMBOL(irq_desc); EXPORT_SYMBOL(tb_ticks_per_jiffy); -EXPORT_SYMBOL(console_drivers); EXPORT_SYMBOL(cacheable_memcpy); #endif -- cgit v1.2.3 From 313348db0bff8911b1219e6338342d0527072741 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 16 Jun 2008 21:14:12 +1000 Subject: [POWERPC] Turn on ATA_SFF so we get SATA_SVW back in defconfigs This enables CONFIG_ATA_SFF in the defconfigs that are intended to work on a G5 powermac, i.e. g5_defconfig and ppc64_defconfig. Since the support for the SATA cell in the K2 chipset is provided by the sata_svw.c driver, and that depends on CONFIG_ATA_SFF, we need to turn that and CONFIG_SATA_SVW back on so we can get to the hard disk on G5s. Signed-off-by: Paul Mackerras --- arch/powerpc/configs/g5_defconfig | 62 +++++++++++++++++++++++++++++++-- arch/powerpc/configs/ppc64_defconfig | 66 ++++++++++++++++++++++++++++++++++-- 2 files changed, 122 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index db34909831a2..0ccc6e493dcb 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc3 -# Tue May 20 20:01:18 2008 +# Linux kernel version: 2.6.26-rc6 +# Mon Jun 16 21:08:31 2008 # CONFIG_PPC64=y @@ -597,7 +597,61 @@ CONFIG_ATA=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set -# CONFIG_ATA_SFF is not set +CONFIG_ATA_SFF=y +CONFIG_SATA_SVW=y +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y @@ -1230,6 +1284,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM=m CONFIG_USB_PRINTER=y +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1345,6 +1400,7 @@ CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 40f84fa2bd29..ce250bc98584 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc3 -# Tue May 20 20:03:02 2008 +# Linux kernel version: 2.6.26-rc6 +# Mon Jun 16 21:11:19 2008 # CONFIG_PPC64=y @@ -763,7 +763,63 @@ CONFIG_ATA_NONSTANDARD=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set CONFIG_SATA_SIL24=y -# CONFIG_ATA_SFF is not set +CONFIG_ATA_SFF=y +CONFIG_SATA_SVW=y +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PCMCIA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCC is not set +# CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y @@ -1478,6 +1534,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1537,6 +1594,7 @@ CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1597,6 +1655,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -1617,6 +1676,7 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +CONFIG_RTC_DRV_PPC=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set -- cgit v1.2.3 From e4f3ec063421bdbcb93330e72aa3eeedb6a0d85a Mon Sep 17 00:00:00 2001 From: Paul Collins Date: Sat, 14 Jun 2008 14:14:59 +1200 Subject: udf: restore UDFFS_DEBUG to being undefined by default Commit 706047a79725b585cf272fdefc234b31b6545c72, "udf: Fix compilation warnings when UDF debug is on" inadvertently (I assume) enabled debugging messages by default for UDF. This patch disables them again. Signed-off-by: Paul Collins Signed-off-by: Jan Kara --- fs/udf/udfdecl.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/udf/udfdecl.h b/fs/udf/udfdecl.h index 8fa9c2d70911..8ec865de5f13 100644 --- a/fs/udf/udfdecl.h +++ b/fs/udf/udfdecl.h @@ -16,7 +16,7 @@ #define UDF_PREALLOCATE #define UDF_DEFAULT_PREALLOC_BLOCKS 8 -#define UDFFS_DEBUG +#undef UDFFS_DEBUG #ifdef UDFFS_DEBUG #define udf_debug(f, a...) \ -- cgit v1.2.3 From 9f9115d880ca550922434aee05ca18796c58eb99 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 16 Jun 2008 14:13:52 +0200 Subject: sound: oxygen: fix NULL pointer dereference when loading snd-oxygen Check that model->control_filter is set before trying to call it. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/pci/oxygen/oxygen_mixer.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/sound/pci/oxygen/oxygen_mixer.c b/sound/pci/oxygen/oxygen_mixer.c index cc0cddadd589..6facac5aed90 100644 --- a/sound/pci/oxygen/oxygen_mixer.c +++ b/sound/pci/oxygen/oxygen_mixer.c @@ -936,11 +936,13 @@ static int add_controls(struct oxygen *chip, for (i = 0; i < count; ++i) { template = controls[i]; - err = chip->model->control_filter(&template); - if (err < 0) - return err; - if (err == 1) - continue; + if (chip->model->control_filter) { + err = chip->model->control_filter(&template); + if (err < 0) + return err; + if (err == 1) + continue; + } if (!strcmp(template.name, "Master Playback Volume") && chip->model->dac_tlv) { template.tlv.p = chip->model->dac_tlv; -- cgit v1.2.3 From 497d2adcbf50bccec6c56620d61d77429d23993a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 6 Jun 2008 14:23:06 +0100 Subject: [MIPS] Export empty_zero_page for sake of the ext4 module. Signed-off-by: Ralf Baechle --- arch/mips/mm/init.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index ecd562d2c348..137c14bafd6b 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -71,6 +71,7 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); * don't have to care about aliases on other CPUs. */ unsigned long empty_zero_page, zero_page_mask; +EXPORT_SYMBOL_GPL(empty_zero_page); /* * Not static inline because used by IP27 special magic initialization code -- cgit v1.2.3 From 6b7d0b2fb6da3f6182f2bd162bf02ed4aed1813f Mon Sep 17 00:00:00 2001 From: bruno randolf Date: Fri, 6 Jun 2008 16:42:03 +0200 Subject: [MIPS] Alchemy: Add au1500 reserved interrupt In the conversion done in the commits 95c4eb3ef4484ca85da5c98780d358cffd546b90 9d360ab4a7568a8d177280f651a8a772ae52b9b9 [MIPS] Alchemy: Renumber interrupts so irq_cpu can work. one reserved interrupt on au1500 was missed. this broke the au1000 ethernet driver. Signed-off-by: Bruno Randolf Signed-off-by: Ralf Baechle --- include/asm-mips/mach-au1x00/au1000.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h index 1b5064dac007..0d302bad4492 100644 --- a/include/asm-mips/mach-au1x00/au1000.h +++ b/include/asm-mips/mach-au1x00/au1000.h @@ -615,6 +615,7 @@ enum soc_au1500_ints { AU1000_RTC_MATCH1_INT, AU1000_RTC_MATCH2_INT, AU1500_PCI_ERR_INT, + AU1500_RESERVED_INT, AU1000_USB_DEV_REQ_INT, AU1000_USB_DEV_SUS_INT, AU1000_USB_HOST_INT, -- cgit v1.2.3 From d0f9cbd4b29c3d208d6b31519cbb940d98d61e7d Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 9 Jun 2008 17:20:03 +0100 Subject: [MIPS] SB1250: Initialize io_map_base Correctly initialize io_map_base for the SB1250 PCI controller as required for proper iomap support. Based on a proposal from Daniel Jacobowitz. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ralf Baechle --- arch/mips/pci/pci-sb1250.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c index 42e4d2c800fa..2a09ad91ec8c 100644 --- a/arch/mips/pci/pci-sb1250.c +++ b/arch/mips/pci/pci-sb1250.c @@ -207,6 +207,7 @@ struct pci_controller sb1250_controller = { static int __init sb1250_pcibios_init(void) { + void __iomem *io_map_base; uint32_t cmdreg; uint64_t reg; extern int pci_probe_only; @@ -253,12 +254,13 @@ static int __init sb1250_pcibios_init(void) * works correctly with most of Linux's drivers. * XXX ehs: Should this happen in PCI Device mode? */ - - set_io_port_base((unsigned long) - ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 65536)); isa_slot_offset = (unsigned long) ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES_32, 1024 * 1024); + io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024); + sb1250_controller.io_map_base = io_map_base; + set_io_port_base((unsigned long)io_map_base); + #ifdef CONFIG_SIBYTE_HAS_LDT /* * Also check the LDT bridge's enable, just in case we didn't -- cgit v1.2.3 From 0e27d7931157fa89cc9afb7735095a0d81ce8fec Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 27 May 2008 01:15:16 +0200 Subject: [MIPS] Better load address for big endian SNI RM Use better load address for big endian kernels to avoid clashes with PROM / SASH. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 69648d01acc0..1ec8e35f2e48 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -565,7 +565,11 @@ load-$(CONFIG_BCM47XX) := 0xffffffff80001000 # core-$(CONFIG_SNI_RM) += arch/mips/sni/ cflags-$(CONFIG_SNI_RM) += -Iinclude/asm-mips/mach-rm +ifdef CONFIG_CPU_LITTLE_ENDIAN load-$(CONFIG_SNI_RM) += 0xffffffff80600000 +else +load-$(CONFIG_SNI_RM) += 0xffffffff80030000 +endif all-$(CONFIG_SNI_RM) := vmlinux.ecoff # -- cgit v1.2.3 From 330117ff2723566e8eb7ad43223081b557f1540e Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 27 May 2008 01:15:20 +0200 Subject: [MIPS] Add RM200 with R5000 CPU to known ARC machines RM200 with R5ks have a little bit different arcname. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/fw/arc/identify.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/mips/fw/arc/identify.c b/arch/mips/fw/arc/identify.c index 28dfd2e2989a..23066985a734 100644 --- a/arch/mips/fw/arc/identify.c +++ b/arch/mips/fw/arc/identify.c @@ -67,6 +67,11 @@ static struct smatch mach_table[] = { .liname = "SNI RM200_PCI", .type = MACH_SNI_RM200_PCI, .flags = PROM_FLAG_DONT_FREE_TEMP, + }, { + .arcname = "RM200PCI-R5K", + .liname = "SNI RM200_PCI-R5K", + .type = MACH_SNI_RM200_PCI, + .flags = PROM_FLAG_DONT_FREE_TEMP, } }; -- cgit v1.2.3 From 89052bd7b393434f7c573ce6a3b88c5f143586d2 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 12 Jun 2008 17:26:02 +0100 Subject: [MIPS] Fix build for PNX platforms. Build error was caused by commit 351336929ccf222ae38ff0cb7a8dd5fd5c6236a0. Signed-off-by: Ralf Baechle --- arch/mips/mm/c-r4k.c | 26 ++++++++++++++++++++++++++ arch/mips/nxp/pnx8550/jbs/board_setup.c | 11 +---------- arch/mips/nxp/pnx8550/stb810/board_setup.c | 10 +--------- include/asm-mips/pgtable-bits.h | 2 -- 4 files changed, 28 insertions(+), 21 deletions(-) diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 643c8bcffff3..c41ea2284954 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -1226,6 +1226,28 @@ void au1x00_fixup_config_od(void) } } +/* CP0 hazard avoidance. */ +#define NXP_BARRIER() \ + __asm__ __volatile__( \ + ".set noreorder\n\t" \ + "nop; nop; nop; nop; nop; nop;\n\t" \ + ".set reorder\n\t") + +static void nxp_pr4450_fixup_config(void) +{ + unsigned long config0; + + config0 = read_c0_config(); + + /* clear all three cache coherency fields */ + config0 &= ~(0x7 | (7 << 25) | (7 << 28)); + config0 |= (((_page_cachable_default >> _CACHE_SHIFT) << 0) | + ((_page_cachable_default >> _CACHE_SHIFT) << 25) | + ((_page_cachable_default >> _CACHE_SHIFT) << 28)); + write_c0_config(config0); + NXP_BARRIER(); +} + static int __cpuinitdata cca = -1; static int __init cca_setup(char *str) @@ -1271,6 +1293,10 @@ static void __cpuinit coherency_setup(void) case CPU_AU1500: /* rev. AB */ au1x00_fixup_config_od(); break; + + case PRID_IMP_PR4450: + nxp_pr4450_fixup_config(); + break; } } diff --git a/arch/mips/nxp/pnx8550/jbs/board_setup.c b/arch/mips/nxp/pnx8550/jbs/board_setup.c index f92826e0096d..57dd903ca408 100644 --- a/arch/mips/nxp/pnx8550/jbs/board_setup.c +++ b/arch/mips/nxp/pnx8550/jbs/board_setup.c @@ -47,16 +47,7 @@ void __init board_setup(void) { - unsigned long config0, configpr; - - config0 = read_c0_config(); - - /* clear all three cache coherency fields */ - config0 &= ~(0x7 | (7<<25) | (7<<28)); - config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) | - (CONF_CM_DEFAULT<<28)); - write_c0_config(config0); - BARRIER; + unsigned long configpr; configpr = read_c0_config7(); configpr |= (1<<19); /* enable tlb */ diff --git a/arch/mips/nxp/pnx8550/stb810/board_setup.c b/arch/mips/nxp/pnx8550/stb810/board_setup.c index 1282c27cfcb7..af2a55e0b4e9 100644 --- a/arch/mips/nxp/pnx8550/stb810/board_setup.c +++ b/arch/mips/nxp/pnx8550/stb810/board_setup.c @@ -33,15 +33,7 @@ void __init board_setup(void) { - unsigned long config0, configpr; - - config0 = read_c0_config(); - - /* clear all three cache coherency fields */ - config0 &= ~(0x7 | (7<<25) | (7<<28)); - config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) | - (CONF_CM_DEFAULT<<28)); - write_c0_config(config0); + unsigned long configpr; configpr = read_c0_config7(); configpr |= (1<<19); /* enable tlb */ diff --git a/include/asm-mips/pgtable-bits.h b/include/asm-mips/pgtable-bits.h index 60e2f9338fcd..51b34a48c84a 100644 --- a/include/asm-mips/pgtable-bits.h +++ b/include/asm-mips/pgtable-bits.h @@ -134,6 +134,4 @@ #define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK) -#define CONF_CM_DEFAULT (PAGE_CACHABLE_DEFAULT>>_CACHE_SHIFT) - #endif /* _ASM_PGTABLE_BITS_H */ -- cgit v1.2.3 From 7bd0fea2c590d94995c2ee0b32e786c1c62621fa Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 30 May 2008 13:07:21 +0900 Subject: [MIPS] Fix the fix for divide by zero error in build_{clear,copy}_page Signed-off-by: Ralf Baechle --- arch/mips/mm/page.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c index cab81f42eee5..1edf0cbbeede 100644 --- a/arch/mips/mm/page.c +++ b/arch/mips/mm/page.c @@ -460,7 +460,7 @@ void __cpuinit build_copy_page(void) build_copy_load_pref(&buf, -off); off -= cache_line_size; } - off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) * + off = cache_line_size ? min(8, pref_bias_copy_store / cache_line_size) * cache_line_size : 0; while (off) { build_copy_store_pref(&buf, -off); -- cgit v1.2.3 From 63a4881a7dd45038f46caa7c3c08b88b01cf9473 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 13 Jun 2008 00:14:10 +0100 Subject: [MIPS] Sibyte: Build RTC support as an object Build the SWARM platform library is as an object rather than an archive so that files which only contain symbols used by initcalls and do not provide any symbols that would pull them from an archive still work. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 14 +++++++------- arch/mips/sibyte/swarm/Makefile | 4 ++-- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 1ec8e35f2e48..ad36c946ff96 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -538,19 +538,19 @@ cflags-$(CONFIG_SIBYTE_BCM1x80) += -Iinclude/asm-mips/mach-sibyte \ # Sibyte SWARM board # Sibyte BCM91x80 (BigSur) board # -libs-$(CONFIG_SIBYTE_CARMEL) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_CARMEL) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_CARMEL) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_CRHINE) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_CRHINE) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_CRHINE) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_CRHONE) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_CRHONE) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_CRHONE) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_RHONE) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_RHONE) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_RHONE) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_SENTOSA) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_SENTOSA) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_SENTOSA) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_SWARM) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_SWARM) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000 # diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile index 2d626039195c..1775755a2619 100644 --- a/arch/mips/sibyte/swarm/Makefile +++ b/arch/mips/sibyte/swarm/Makefile @@ -1,3 +1,3 @@ -lib-y = setup.o rtc_xicor1241.o rtc_m41t81.o +obj-y := setup.o rtc_xicor1241.o rtc_m41t81.o -lib-$(CONFIG_KGDB) += dbg_io.o +obj-$(CONFIG_KGDB) += dbg_io.o -- cgit v1.2.3 From 461a082f870c7fc6a0a245e2f93c9f0e3afbeddd Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 13 Jun 2008 00:10:00 +0100 Subject: [MIPS] Bring the SWARM defconfig up to date The SWARM defconfig file has not been regenerated for over a year now. Here is a patch to bring the file up to date. Additionally some important and sometimes confusing changes happened meanwhile. Here is the list of notable corresponding updates to the configuration: 1. CPU_SB1_PASS_2_2 is now selected rather than CPU_SB1_PASS_1. The latter requires a non-standard -msb1-pass1-workarounds option to be supported by GCC and I am told is quite rare anyway. [Ralf: Afaik -msb1-pass1-workarounds is available only in Monta Vista's special Sibyte gcc 3.0 variant and gcc 3.0 is too old to build a modern kernel anyway.] 2. PHYLIB and BROADCOM_PHY are both built in and NETDEV_1000 enabled as required by SB1250_MAC. 3. USB and USB_OHCI_HCD are enabled as there is an OHCI chip onboard. 4. TMPFS is enabled, because I use it. ;-) Signed-off-by: Maciej W. Rozycki Signed-off-by: Ralf Baechle --- arch/mips/configs/sb1250-swarm_defconfig | 676 ++++++++++++++++--------------- 1 file changed, 357 insertions(+), 319 deletions(-) diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index 117470b60e34..4b8799802788 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -1,67 +1,58 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:40 2007 +# Linux kernel version: 2.6.25 +# Sat May 3 00:38:11 2008 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -CONFIG_SIBYTE_SWARM=y -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +CONFIG_SIBYTE_SWARM=y +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_WR_PPMC is not set CONFIG_SIBYTE_SB1250=y CONFIG_SIBYTE_SB1xxx_SOC=y -CONFIG_CPU_SB1_PASS_1=y +# CONFIG_CPU_SB1_PASS_1 is not set # CONFIG_CPU_SB1_PASS_2_1250 is not set -# CONFIG_CPU_SB1_PASS_2_2 is not set +CONFIG_CPU_SB1_PASS_2_2=y # CONFIG_CPU_SB1_PASS_4 is not set # CONFIG_CPU_SB1_PASS_2_112x is not set # CONFIG_CPU_SB1_PASS_3 is not set CONFIG_SIBYTE_HAS_LDT=y +CONFIG_SIBYTE_ENABLE_LDT_IF_PCI=y # CONFIG_SIMULATION is not set # CONFIG_SB1_CEX_ALWAYS_FATAL is not set # CONFIG_SB1_CERR_STALL is not set @@ -69,20 +60,32 @@ CONFIG_SIBYTE_CFE=y # CONFIG_SIBYTE_CFE_CONSOLE is not set # CONFIG_SIBYTE_BUS_WATCHER is not set # CONFIG_SIBYTE_TBPROF is not set +CONFIG_SIBYTE_HAS_ZBUS_PROFILING=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_CEVT_SB1250=y +CONFIG_CSRC_SB1250=y +CONFIG_CFE=y CONFIG_DMA_COHERENT=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y CONFIG_SWAP_IO_SPACE=y CONFIG_BOOT_ELF32=y CONFIG_MIPS_L1_CACHE_SHIFT=5 @@ -90,6 +93,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +# CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -130,8 +134,7 @@ CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set -CONFIG_SB1_PASS_1_WORKAROUNDS=y +CONFIG_SB1_PASS_2_WORKAROUNDS=y CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -140,6 +143,7 @@ CONFIG_IRQ_PER_CPU=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_SYS_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -147,13 +151,19 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y CONFIG_SMP=y CONFIG_SYS_SUPPORTS_SMP=y CONFIG_NR_CPUS_DEFAULT_2=y CONFIG_NR_CPUS=2 +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -166,38 +176,49 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y # CONFIG_KEXEC is not set +CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=15 CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +# CONFIG_CGROUP_NS is not set CONFIG_CPUSETS=y -CONFIG_SYSFS_DEPRECATED=y +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_CGROUP_CPUACCT=y +# CONFIG_RESOURCE_COUNTERS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_PROC_PID_CPUSET is not set CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -209,20 +230,29 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set @@ -230,12 +260,10 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_BLK_DEV_BSG=y +CONFIG_BLOCK_COMPAT=y # # IO Schedulers @@ -249,22 +277,19 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_LEGACY is not set CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_ZONE_DMA32=y # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # @@ -272,7 +297,6 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -# CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y @@ -286,7 +310,6 @@ CONFIG_BINFMT_ELF32=y CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set # # Networking @@ -296,7 +319,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -304,6 +326,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -326,6 +349,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -333,24 +357,15 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -363,26 +378,52 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set +CONFIG_NET_SCH_FIFO=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +CONFIG_CFG80211=m +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=m + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_NONE is not set + +# +# Selecting 'y' for an algorithm will +# + +# +# build the algorithm into mac80211. +# +CONFIG_MAC80211_RC_DEFAULT="pid" +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set +# CONFIG_MAC80211_DEBUG is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_RFKILL=m +# CONFIG_NET_9P is not set # # Device Drivers @@ -391,34 +432,15 @@ CONFIG_WIRELESS_EXT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -427,49 +449,77 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=9220 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y +# CONFIG_BLK_DEV_XIP is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_SGI_IOC4=m # CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y CONFIG_BLK_DEV_IDETAPE=y CONFIG_BLK_DEV_IDEFLOPPY=y # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_IDEPCI is not set +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set + +# +# PCI IDE chipsets support +# +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDE_SWARM=y -# CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -477,89 +527,68 @@ CONFIG_BLK_DEV_IDE_SWARM=y # CONFIG_RAID_ATTRS=m # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +CONFIG_NETDEVICES_MULTIQUEUE=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +CONFIG_MACVLAN=m # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# +# CONFIG_VETH is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=m +CONFIG_PHYLIB=y # # MII PHY device drivers # -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -# CONFIG_BROADCOM_PHY is not set +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +CONFIG_BROADCOM_PHY=y +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_DM9000 is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -568,53 +597,70 @@ CONFIG_SB1250_MAC=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -CONFIG_QLA3XXX=m +# CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_LIBERTAS is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +# CONFIG_ADM8211 is not set +# CONFIG_P54_COMMON is not set +# CONFIG_ATH5K is not set +# CONFIG_IWLCORE is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -637,24 +683,8 @@ CONFIG_SERIO_RAW=m # Character devices # # CONFIG_VT is not set -CONFIG_SERIAL_NONSTANDARD=y -# CONFIG_COMPUTONE is not set -# CONFIG_ROCKETPORT is not set -# CONFIG_CYCLADES is not set -# CONFIG_DIGIEPCA is not set -# CONFIG_MOXA_INTELLIO is not set -# CONFIG_MOXA_SMARTIO is not set -CONFIG_MOXA_SMARTIO_NEW=m -# CONFIG_ISI is not set -# CONFIG_SYNCLINKMP is not set -# CONFIG_SYNCLINK_GT is not set -# CONFIG_N_HDLC is not set -# CONFIG_SPECIALIX is not set -# CONFIG_SX is not set -# CONFIG_RIO is not set -# CONFIG_STALDRV is not set -CONFIG_SERIAL_SB1250_DUART=y -CONFIG_SERIAL_SB1250_DUART_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -664,37 +694,22 @@ CONFIG_SERIAL_SB1250_DUART_CONSOLE=y # # Non-8250 serial port support # +CONFIG_SERIAL_SB1250_DUART=y +CONFIG_SERIAL_SB1250_DUART_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -702,109 +717,139 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set # -# Dallas's 1-wire bus +# Sonics Silicon Backplane # -# CONFIG_W1 is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # -# CONFIG_SOUND is not set +# CONFIG_DISPLAY_SUPPORT is not set # -# USB support +# Sound # +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # -# USB Gadget Support +# Miscellaneous USB options # -# CONFIG_USB_GADGET is not set +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set # -# MMC/SD Card support +# USB Host Controller Drivers # -# CONFIG_MMC is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # -# LED devices +# USB Device Class drivers # -# CONFIG_NEW_LEDS is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set # -# LED drivers +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # -# LED Triggers +# may also be needed; see USB_STORAGE Help for more information # +# CONFIG_USB_LIBUSUAL is not set # -# InfiniBand support +# USB Imaging devices # -# CONFIG_INFINIBAND is not set +# CONFIG_USB_MDC800 is not set +CONFIG_USB_MON=y # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# USB port drivers # +# CONFIG_USB_SERIAL is not set # -# Real Time Clock +# USB Miscellaneous drivers # +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -823,15 +868,14 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -853,9 +897,9 @@ CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y CONFIG_CONFIGFS_FS=m # @@ -871,14 +915,13 @@ CONFIG_CONFIGFS_FS=m # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -890,6 +933,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -897,45 +941,29 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set # CONFIG_DLM_DEBUG is not set -# -# Profiling support -# -# CONFIG_PROFILING is not set - # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_CROSSCOMPILE=y +# CONFIG_SAMPLES is not set CONFIG_CMDLINE="" CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_SB1XXX_CORELIS is not set @@ -946,13 +974,12 @@ CONFIG_SYS_SUPPORTS_KGDB=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_SEQIV=m CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y @@ -970,6 +997,11 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m @@ -983,15 +1015,16 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_LZO=m +# CONFIG_CRYPTO_HW is not set # # Library routines @@ -999,10 +1032,15 @@ CONFIG_CRYPTO_CAMELLIA=m CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v1.2.3 From a9ad02bdbb0193203a477bbd0e833adf9fb29ac4 Mon Sep 17 00:00:00 2001 From: Zenon Fortuna Date: Fri, 16 May 2008 17:29:48 -0700 Subject: [MIPS] Export smp_call_function and smp_call_function_single. Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle --- arch/mips/kernel/smp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 63370cdd3c90..cdf87a9dd4ba 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -216,6 +216,7 @@ int smp_call_function(void (*func) (void *info), void *info, int retry, { return smp_call_function_mask(cpu_online_map, func, info, retry, wait); } +EXPORT_SYMBOL(smp_call_function); void smp_call_function_interrupt(void) { @@ -271,6 +272,7 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info, put_cpu(); return 0; } +EXPORT_SYMBOL(smp_call_function_single); static void stop_this_cpu(void *dummy) { -- cgit v1.2.3 From d6c3048cad3c9eb312c070e11fdbea56498255ed Mon Sep 17 00:00:00 2001 From: Chris Dearman Date: Fri, 16 May 2008 17:29:54 -0700 Subject: [MIPS] vpe_id is required for VSMP and SMTC builds Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle --- include/asm-mips/cpu-info.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-mips/cpu-info.h b/include/asm-mips/cpu-info.h index 0c5a358863f3..2de73dbb2e9e 100644 --- a/include/asm-mips/cpu-info.h +++ b/include/asm-mips/cpu-info.h @@ -56,7 +56,7 @@ struct cpuinfo_mips { struct cache_desc tcache; /* Tertiary/split secondary cache */ int srsets; /* Shadow register sets */ int core; /* physical core number */ -#if defined(CONFIG_MIPS_MT_SMTC) +#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC) /* * In the MIPS MT "SMTC" model, each TC is considered * to be a "CPU" for the purposes of scheduling, but @@ -64,7 +64,7 @@ struct cpuinfo_mips { * to all TCs within the same VPE. */ int vpe_id; /* Virtual Processor number */ -#endif /* CONFIG_MIPS_MT */ +#endif #ifdef CONFIG_MIPS_MT_SMTC int tc_id; /* Thread Context number */ #endif -- cgit v1.2.3 From 0c3bd83b0974238a5808d342663c6407512564d0 Mon Sep 17 00:00:00 2001 From: Thomas Horsten Date: Sat, 14 Jun 2008 02:32:42 +0100 Subject: [MIPS] Lasat: bring back from the dead After the common MIPS CPU interrupt controller (for irq0-7) was introduced the Lasat boards didn't get their interrupts right, so nothing worked. The old routines need to be offset by the new 8 hardware interrupts common to all MIPS CPU's. Signed-off-by: Thomas Horsten Signed-off-by: Ralf Baechle --- arch/mips/lasat/interrupt.c | 2 ++ include/asm-mips/lasat/serial.h | 4 ++-- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c index cfeab669782f..a56c15026965 100644 --- a/arch/mips/lasat/interrupt.c +++ b/arch/mips/lasat/interrupt.c @@ -34,11 +34,13 @@ static volatile int lasat_int_mask_shift; void disable_lasat_irq(unsigned int irq_nr) { + irq_nr -= LASAT_IRQ_BASE; *lasat_int_mask &= ~(1 << irq_nr) << lasat_int_mask_shift; } void enable_lasat_irq(unsigned int irq_nr) { + irq_nr -= LASAT_IRQ_BASE; *lasat_int_mask |= (1 << irq_nr) << lasat_int_mask_shift; } diff --git a/include/asm-mips/lasat/serial.h b/include/asm-mips/lasat/serial.h index bafe68b10614..1c37d70579b8 100644 --- a/include/asm-mips/lasat/serial.h +++ b/include/asm-mips/lasat/serial.h @@ -4,10 +4,10 @@ #define LASAT_BASE_BAUD_100 (7372800 / 16) #define LASAT_UART_REGS_BASE_100 0x1c8b0000 #define LASAT_UART_REGS_SHIFT_100 2 -#define LASATINT_UART_100 8 +#define LASATINT_UART_100 16 /* * LASAT 200 boards serial configuration */ #define LASAT_BASE_BAUD_200 (100000000 / 16 / 12) #define LASAT_UART_REGS_BASE_200 (Vrc5074_PHYS_BASE + 0x0300) #define LASAT_UART_REGS_SHIFT_200 3 -#define LASATINT_UART_200 13 +#define LASATINT_UART_200 21 -- cgit v1.2.3 From c9c5023d83df5dc7d58830a63fd0e082120f00e3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 14 Jun 2008 22:22:08 +0100 Subject: [MIPS] Fix buggy use of kmap_coherent. Assuming the call of kmap_coherent in local_r4k_flush_cache_page doesn't need fixing this was skipped in fcae549295bcae801ac48fc1c2030ab8cc487020. Turns out it needed the same change after all. Signed-off-by: Ralf Baechle --- arch/mips/mm/c-r4k.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index c41ea2284954..27096751ddce 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -446,6 +446,7 @@ static inline void local_r4k_flush_cache_page(void *args) struct page *page = pfn_to_page(fcp_args->pfn); int exec = vma->vm_flags & VM_EXEC; struct mm_struct *mm = vma->vm_mm; + int map_coherent = 0; pgd_t *pgdp; pud_t *pudp; pmd_t *pmdp; @@ -479,7 +480,9 @@ static inline void local_r4k_flush_cache_page(void *args) * Use kmap_coherent or kmap_atomic to do flushes for * another ASID than the current one. */ - if (cpu_has_dc_aliases) + map_coherent = (cpu_has_dc_aliases && + page_mapped(page) && !Page_dcache_dirty(page)); + if (map_coherent) vaddr = kmap_coherent(page, addr); else vaddr = kmap_atomic(page, KM_USER0); @@ -502,7 +505,7 @@ static inline void local_r4k_flush_cache_page(void *args) } if (vaddr) { - if (cpu_has_dc_aliases) + if (map_coherent) kunmap_coherent(); else kunmap_atomic(vaddr, KM_USER0); -- cgit v1.2.3 From 1f34f2e4262bae8a1aa6d8fd6306b07074d33718 Mon Sep 17 00:00:00 2001 From: Thomas Horsten Date: Sun, 15 Jun 2008 02:17:11 +0100 Subject: [MIPS] Lasat: sysctl fixup LASAT's sysctl interface was broken, it failed a check during boot because a single entry had a sysctl number and the rest were unnumbered. When I fixed it I noticed that the whole sysctl file needed a spring clean, it was using mutexes where it wasn't needed (it's only needed to protect during writes to the EEPROM), so I moved that stuff out and generally cleaned the whole thing up. So now, LASAT's sysctl/proc interface is working again. Signed-off-by: Thomas Horsten Signed-off-by: Ralf Baechle --- arch/mips/lasat/lasat_board.c | 13 ++-- arch/mips/lasat/sysctl.c | 172 ++++++++++++------------------------------ arch/mips/lasat/sysctl.h | 24 ------ 3 files changed, 56 insertions(+), 153 deletions(-) delete mode 100644 arch/mips/lasat/sysctl.h diff --git a/arch/mips/lasat/lasat_board.c b/arch/mips/lasat/lasat_board.c index ec2f658c3709..31e328b3814d 100644 --- a/arch/mips/lasat/lasat_board.c +++ b/arch/mips/lasat/lasat_board.c @@ -23,18 +23,19 @@ #include #include #include +#include #include #include #include "at93c.h" /* New model description table */ #include "lasat_models.h" +static DEFINE_MUTEX(lasat_eeprom_mutex); + #define EEPROM_CRC(data, len) (~crc32(~0, data, len)) struct lasat_info lasat_board_info; -void update_bcastaddr(void); - int EEPROMRead(unsigned int pos, unsigned char *data, int len) { int i; @@ -258,10 +259,6 @@ int lasat_init_board_info(void) sprintf(lasat_board_info.li_typestr, "%d", 10 * c); } -#if defined(CONFIG_INET) && defined(CONFIG_SYSCTL) - update_bcastaddr(); -#endif - return 0; } @@ -269,6 +266,8 @@ void lasat_write_eeprom_info(void) { unsigned long crc; + mutex_lock(&lasat_eeprom_mutex); + /* Generate the CRC */ crc = EEPROM_CRC((unsigned char *)(&lasat_board_info.li_eeprom_info), sizeof(struct lasat_eeprom_struct) - 4); @@ -277,4 +276,6 @@ void lasat_write_eeprom_info(void) /* Write the EEPROM info */ EEPROMWrite(0, (unsigned char *)&lasat_board_info.li_eeprom_info, sizeof(struct lasat_eeprom_struct)); + + mutex_unlock(&lasat_eeprom_mutex); } diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c index 389336c4ecc5..866881ec0cf8 100644 --- a/arch/mips/lasat/sysctl.c +++ b/arch/mips/lasat/sysctl.c @@ -29,15 +29,13 @@ #include #include #include -#include #include #include -#include "sysctl.h" +#ifdef CONFIG_DS1603 #include "ds1603.h" - -static DEFINE_MUTEX(lasat_info_mutex); +#endif /* Strategy function to write EEPROM after changing string entry */ int sysctl_lasatstring(ctl_table *table, int *name, int nlen, @@ -46,18 +44,15 @@ int sysctl_lasatstring(ctl_table *table, int *name, int nlen, { int r; - mutex_lock(&lasat_info_mutex); r = sysctl_string(table, name, nlen, oldval, oldlenp, newval, newlen); - if (r < 0) { - mutex_unlock(&lasat_info_mutex); + if (r < 0) return r; - } + if (newval && newlen) lasat_write_eeprom_info(); - mutex_unlock(&lasat_info_mutex); - return 1; + return 0; } @@ -67,14 +62,11 @@ int proc_dolasatstring(ctl_table *table, int write, struct file *filp, { int r; - mutex_lock(&lasat_info_mutex); r = proc_dostring(table, write, filp, buffer, lenp, ppos); - if ((!write) || r) { - mutex_unlock(&lasat_info_mutex); + if ((!write) || r) return r; - } + lasat_write_eeprom_info(); - mutex_unlock(&lasat_info_mutex); return 0; } @@ -85,28 +77,24 @@ int proc_dolasatint(ctl_table *table, int write, struct file *filp, { int r; - mutex_lock(&lasat_info_mutex); r = proc_dointvec(table, write, filp, buffer, lenp, ppos); - if ((!write) || r) { - mutex_unlock(&lasat_info_mutex); + if ((!write) || r) return r; - } + lasat_write_eeprom_info(); - mutex_unlock(&lasat_info_mutex); return 0; } +#ifdef CONFIG_DS1603 static int rtctmp; -#ifdef CONFIG_DS1603 /* proc function to read/write RealTime Clock */ int proc_dolasatrtc(ctl_table *table, int write, struct file *filp, void *buffer, size_t *lenp, loff_t *ppos) { int r; - mutex_lock(&lasat_info_mutex); if (!write) { rtctmp = read_persistent_clock(); /* check for time < 0 and set to 0 */ @@ -114,12 +102,11 @@ int proc_dolasatrtc(ctl_table *table, int write, struct file *filp, rtctmp = 0; } r = proc_dointvec(table, write, filp, buffer, lenp, ppos); - if ((!write) || r) { - mutex_unlock(&lasat_info_mutex); + if (r) return r; - } - rtc_mips_set_mmss(rtctmp); - mutex_unlock(&lasat_info_mutex); + + if (write) + rtc_mips_set_mmss(rtctmp); return 0; } @@ -132,17 +119,14 @@ int sysctl_lasat_intvec(ctl_table *table, int *name, int nlen, { int r; - mutex_lock(&lasat_info_mutex); r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen); - if (r < 0) { - mutex_unlock(&lasat_info_mutex); + if (r < 0) return r; - } + if (newval && newlen) lasat_write_eeprom_info(); - mutex_unlock(&lasat_info_mutex); - return 1; + return 0; } #ifdef CONFIG_DS1603 @@ -153,50 +137,27 @@ int sysctl_lasat_rtc(ctl_table *table, int *name, int nlen, { int r; - mutex_lock(&lasat_info_mutex); rtctmp = read_persistent_clock(); if (rtctmp < 0) rtctmp = 0; r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen); - if (r < 0) { - mutex_unlock(&lasat_info_mutex); + if (r < 0) return r; - } if (newval && newlen) rtc_mips_set_mmss(rtctmp); - mutex_unlock(&lasat_info_mutex); - return 1; + return r; } #endif #ifdef CONFIG_INET -static char lasat_bcastaddr[16]; - -void update_bcastaddr(void) -{ - unsigned int ip; - - ip = (lasat_board_info.li_eeprom_info.ipaddr & - lasat_board_info.li_eeprom_info.netmask) | - ~lasat_board_info.li_eeprom_info.netmask; - - sprintf(lasat_bcastaddr, "%d.%d.%d.%d", - (ip) & 0xff, - (ip >> 8) & 0xff, - (ip >> 16) & 0xff, - (ip >> 24) & 0xff); -} - -static char proc_lasat_ipbuf[32]; - -/* Parsing of IP address */ int proc_lasat_ip(ctl_table *table, int write, struct file *filp, void *buffer, size_t *lenp, loff_t *ppos) { unsigned int ip; char *p, c; int len; + char ipbuf[32]; if (!table->data || !table->maxlen || !*lenp || (*ppos && !write)) { @@ -204,117 +165,88 @@ int proc_lasat_ip(ctl_table *table, int write, struct file *filp, return 0; } - mutex_lock(&lasat_info_mutex); if (write) { len = 0; p = buffer; while (len < *lenp) { - if (get_user(c, p++)) { - mutex_unlock(&lasat_info_mutex); + if (get_user(c, p++)) return -EFAULT; - } if (c == 0 || c == '\n') break; len++; } - if (len >= sizeof(proc_lasat_ipbuf)-1) - len = sizeof(proc_lasat_ipbuf) - 1; - if (copy_from_user(proc_lasat_ipbuf, buffer, len)) { - mutex_unlock(&lasat_info_mutex); + if (len >= sizeof(ipbuf)-1) + len = sizeof(ipbuf) - 1; + if (copy_from_user(ipbuf, buffer, len)) return -EFAULT; - } - proc_lasat_ipbuf[len] = 0; + ipbuf[len] = 0; *ppos += *lenp; /* Now see if we can convert it to a valid IP */ - ip = in_aton(proc_lasat_ipbuf); + ip = in_aton(ipbuf); *(unsigned int *)(table->data) = ip; lasat_write_eeprom_info(); } else { ip = *(unsigned int *)(table->data); - sprintf(proc_lasat_ipbuf, "%d.%d.%d.%d", + sprintf(ipbuf, "%d.%d.%d.%d", (ip) & 0xff, (ip >> 8) & 0xff, (ip >> 16) & 0xff, (ip >> 24) & 0xff); - len = strlen(proc_lasat_ipbuf); + len = strlen(ipbuf); if (len > *lenp) len = *lenp; if (len) - if (copy_to_user(buffer, proc_lasat_ipbuf, len)) { - mutex_unlock(&lasat_info_mutex); + if (copy_to_user(buffer, ipbuf, len)) return -EFAULT; - } if (len < *lenp) { - if (put_user('\n', ((char *) buffer) + len)) { - mutex_unlock(&lasat_info_mutex); + if (put_user('\n', ((char *) buffer) + len)) return -EFAULT; - } len++; } *lenp = len; *ppos += len; } - update_bcastaddr(); - mutex_unlock(&lasat_info_mutex); return 0; } -#endif /* defined(CONFIG_INET) */ +#endif -static int sysctl_lasat_eeprom_value(ctl_table *table, int *name, int nlen, +static int sysctl_lasat_prid(ctl_table *table, int *name, int nlen, void *oldval, size_t *oldlenp, void *newval, size_t newlen) { int r; - mutex_lock(&lasat_info_mutex); r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen); - if (r < 0) { - mutex_unlock(&lasat_info_mutex); + if (r < 0) return r; - } - if (newval && newlen) { - if (name && *name == LASAT_PRID) - lasat_board_info.li_eeprom_info.prid = *(int *)newval; - + lasat_board_info.li_eeprom_info.prid = *(int *)newval; lasat_write_eeprom_info(); lasat_init_board_info(); } - mutex_unlock(&lasat_info_mutex); - return 0; } -int proc_lasat_eeprom_value(ctl_table *table, int write, struct file *filp, +int proc_lasat_prid(ctl_table *table, int write, struct file *filp, void *buffer, size_t *lenp, loff_t *ppos) { int r; - mutex_lock(&lasat_info_mutex); r = proc_dointvec(table, write, filp, buffer, lenp, ppos); - if ((!write) || r) { - mutex_unlock(&lasat_info_mutex); + if (r < 0) return r; + if (write) { + lasat_board_info.li_eeprom_info.prid = + lasat_board_info.li_prid; + lasat_write_eeprom_info(); + lasat_init_board_info(); } - if (filp && filp->f_path.dentry) { - if (!strcmp(filp->f_path.dentry->d_name.name, "prid")) - lasat_board_info.li_eeprom_info.prid = - lasat_board_info.li_prid; - if (!strcmp(filp->f_path.dentry->d_name.name, "debugaccess")) - lasat_board_info.li_eeprom_info.debugaccess = - lasat_board_info.li_debugaccess; - } - lasat_write_eeprom_info(); - mutex_unlock(&lasat_info_mutex); - return 0; } extern int lasat_boot_to_service; -#ifdef CONFIG_SYSCTL - static ctl_table lasat_table[] = { { .ctl_name = CTL_UNNUMBERED, @@ -349,8 +281,8 @@ static ctl_table lasat_table[] = { .data = &lasat_board_info.li_prid, .maxlen = sizeof(int), .mode = 0644, - .proc_handler = &proc_lasat_eeprom_value, - .strategy = &sysctl_lasat_eeprom_value + .proc_handler = &proc_lasat_prid, + .strategy = &sysctl_lasat_prid }, #ifdef CONFIG_INET { @@ -363,7 +295,7 @@ static ctl_table lasat_table[] = { .strategy = &sysctl_lasat_intvec }, { - .ctl_name = LASAT_NETMASK, + .ctl_name = CTL_UNNUMBERED, .procname = "netmask", .data = &lasat_board_info.li_eeprom_info.netmask, .maxlen = sizeof(int), @@ -371,15 +303,6 @@ static ctl_table lasat_table[] = { .proc_handler = &proc_lasat_ip, .strategy = &sysctl_lasat_intvec }, - { - .ctl_name = CTL_UNNUMBERED, - .procname = "bcastaddr", - .data = &lasat_bcastaddr, - .maxlen = sizeof(lasat_bcastaddr), - .mode = 0600, - .proc_handler = &proc_dostring, - .strategy = &sysctl_string - }, #endif { .ctl_name = CTL_UNNUMBERED, @@ -417,7 +340,7 @@ static ctl_table lasat_table[] = { .data = &lasat_board_info.li_namestr, .maxlen = sizeof(lasat_board_info.li_namestr), .mode = 0444, - .proc_handler = &proc_dostring, + .proc_handler = &proc_dostring, .strategy = &sysctl_string }, { @@ -448,9 +371,12 @@ static int __init lasat_register_sysctl(void) lasat_table_header = register_sysctl_table(lasat_root_table); + if (!lasat_table_header) { + printk(KERN_ERR "Unable to register LASAT sysctl\n"); + return -ENOMEM; + } return 0; } __initcall(lasat_register_sysctl); -#endif /* CONFIG_SYSCTL */ diff --git a/arch/mips/lasat/sysctl.h b/arch/mips/lasat/sysctl.h deleted file mode 100644 index 341b97933423..000000000000 --- a/arch/mips/lasat/sysctl.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * LASAT sysctl values - */ - -#ifndef _LASAT_SYSCTL_H -#define _LASAT_SYSCTL_H - -/* /proc/sys/lasat */ -enum { - LASAT_CPU_HZ = 1, - LASAT_BUS_HZ, - LASAT_MODEL, - LASAT_PRID, - LASAT_IPADDR, - LASAT_NETMASK, - LASAT_BCAST, - LASAT_PASSWORD, - LASAT_SBOOT, - LASAT_RTC, - LASAT_NAMESTR, - LASAT_TYPESTR, -}; - -#endif /* _LASAT_SYSCTL_H */ -- cgit v1.2.3 From 938b2b14172bd098972df2a5157bfabf161c90e5 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Thu, 29 May 2008 22:05:07 +0200 Subject: [MIPS] Malta: Fix build errors for 64-bit kernels Fix 64-bit Malta by using CKSEG0ADDR and correct casts. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/generic/amon.c | 4 ++-- include/asm-mips/gic.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/mips/mips-boards/generic/amon.c b/arch/mips/mips-boards/generic/amon.c index b7633fda4180..96236bf33838 100644 --- a/arch/mips/mips-boards/generic/amon.c +++ b/arch/mips/mips-boards/generic/amon.c @@ -28,7 +28,7 @@ int amon_cpu_avail(int cpu) { - struct cpulaunch *launch = (struct cpulaunch *)KSEG0ADDR(CPULAUNCH); + struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); if (cpu < 0 || cpu >= NCPULAUNCH) { pr_debug("avail: cpu%d is out of range\n", cpu); @@ -53,7 +53,7 @@ void amon_cpu_start(int cpu, unsigned long gp, unsigned long a0) { volatile struct cpulaunch *launch = - (struct cpulaunch *)KSEG0ADDR(CPULAUNCH); + (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); if (!amon_cpu_avail(cpu)) return; diff --git a/include/asm-mips/gic.h b/include/asm-mips/gic.h index 3a492f225f00..954807d9d66a 100644 --- a/include/asm-mips/gic.h +++ b/include/asm-mips/gic.h @@ -24,8 +24,8 @@ #define MSK(n) ((1 << (n)) - 1) #define REG32(addr) (*(volatile unsigned int *) (addr)) -#define REG(base, offs) REG32((unsigned int)(base) + offs##_##OFS) -#define REGP(base, phys) REG32((unsigned int)(base) + (phys)) +#define REG(base, offs) REG32((unsigned long)(base) + offs##_##OFS) +#define REGP(base, phys) REG32((unsigned long)(base) + (phys)) /* Accessors */ #define GIC_REG(segment, offset) \ -- cgit v1.2.3 From b8157180ccd8bb3752f510c6c434b86394636093 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 16 Jun 2008 00:23:39 +0100 Subject: [MIPS] Malta: Always compile MTD platform device registration code. Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/malta/Makefile | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile index 8dc6e2ac4c03..db4ad654a6d3 100644 --- a/arch/mips/mips-boards/malta/Makefile +++ b/arch/mips/mips-boards/malta/Makefile @@ -19,9 +19,8 @@ # under Linux. # -obj-y := malta_int.o malta_platform.o malta_setup.o +obj-y := malta_int.o malta_mtd.o malta_platform.o malta_setup.o -obj-$(CONFIG_MTD) += malta_mtd.o # FIXME FIXME FIXME obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o -- cgit v1.2.3 From f1304b358a6c952e4cd1f92c8a6f183b1026c103 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Mon, 16 Jun 2008 22:51:08 +0900 Subject: [MIPS] Vr41xx: Initialize PCI io_map_base Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/pci/pci-vr41xx.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/arch/mips/pci/pci-vr41xx.c b/arch/mips/pci/pci-vr41xx.c index 33c4f683d067..d1e049b55f34 100644 --- a/arch/mips/pci/pci-vr41xx.c +++ b/arch/mips/pci/pci-vr41xx.c @@ -3,7 +3,7 @@ * * Copyright (C) 2001-2003 MontaVista Software Inc. * Author: Yoichi Yuasa - * Copyright (C) 2004-2005 Yoichi Yuasa + * Copyright (C) 2004-2008 Yoichi Yuasa * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) * * This program is free software; you can redistribute it and/or modify @@ -300,6 +300,18 @@ static int __init vr41xx_pciu_init(void) ioport_resource.end = IO_PORT_RESOURCE_END; } + if (setup->master_io) { + void __iomem *io_map_base; + struct resource *res = vr41xx_pci_controller.io_resource; + master = setup->master_io; + io_map_base = ioremap(master->bus_base_address, + res->end - res->start + 1); + if (!io_map_base) + return -EBUSY; + + vr41xx_pci_controller.io_map_base = (unsigned long)io_map_base; + } + register_pci_controller(&vr41xx_pci_controller); return 0; -- cgit v1.2.3 From b185194ef0691c8068c7d764aa8f78899d05512a Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Mon, 16 Jun 2008 22:54:16 +0900 Subject: [MIPS] TANBAC: Update defconfig These boards need cca setup on CMDLINE. Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/configs/tb0219_defconfig | 192 +++++++++++++++++----------------- arch/mips/configs/tb0226_defconfig | 192 +++++++++++++++++----------------- arch/mips/configs/tb0287_defconfig | 207 ++++++++++++++++++++----------------- 3 files changed, 303 insertions(+), 288 deletions(-) diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig index af82e1a1823c..8dd3ae39bcad 100644 --- a/arch/mips/configs/tb0219_defconfig +++ b/arch/mips/configs/tb0219_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc2 -# Wed Aug 8 16:11:47 2007 +# Linux kernel version: 2.6.26-rc1 +# Mon May 12 11:54:51 2008 # CONFIG_MIPS=y @@ -10,9 +10,11 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set @@ -26,6 +28,7 @@ CONFIG_MACH_VR41XX=y # CONFIG_PMC_YOSEMITE is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -53,12 +56,17 @@ CONFIG_PCI_VR41XX=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_HOTPLUG_CPU is not set @@ -113,6 +121,7 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -120,10 +129,16 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -156,23 +171,29 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -185,10 +206,19 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -212,18 +242,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -237,6 +266,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set # @@ -278,6 +308,7 @@ CONFIG_INET_TUNNEL=m # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -285,15 +316,10 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -# CONFIG_SCTP_HMAC_MD5 is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -306,10 +332,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -317,6 +339,7 @@ CONFIG_NETWORK_SECMARK=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -339,6 +362,7 @@ CONFIG_FIB_RULES=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m @@ -360,10 +384,11 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_XIP=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -375,10 +400,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set # @@ -394,6 +415,7 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=m @@ -409,7 +431,8 @@ CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set -# CONFIG_FIXED_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set @@ -420,6 +443,10 @@ CONFIG_MII=y # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -427,7 +454,6 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_TC35815 is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -439,6 +465,7 @@ CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -451,6 +478,10 @@ CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -472,6 +503,7 @@ CONFIG_VIA_VELOCITY=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -480,14 +512,12 @@ CONFIG_VIA_VELOCITY=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -506,7 +536,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -533,7 +562,9 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -552,52 +583,62 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set CONFIG_GPIO_TB0219=y -# CONFIG_DRM is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Console display driver support @@ -616,6 +657,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -624,15 +666,18 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -665,10 +710,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -694,17 +735,11 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -729,9 +764,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -740,23 +776,6 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_VR41XX=y - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -771,20 +790,16 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=m +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -813,7 +828,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -828,24 +842,21 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=m # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -866,47 +877,38 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Profiling support -# -# CONFIG_PROFILING is not set - # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" +# CONFIG_SAMPLES is not set +CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index a95385b24546..2ba240e897c6 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc2 -# Thu Aug 9 11:16:55 2007 +# Linux kernel version: 2.6.26-rc1 +# Mon May 12 11:53:54 2008 # CONFIG_MIPS=y @@ -10,9 +10,11 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set @@ -26,6 +28,7 @@ CONFIG_MACH_VR41XX=y # CONFIG_PMC_YOSEMITE is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -53,12 +56,17 @@ CONFIG_PCI_VR41XX=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_HOTPLUG_CPU is not set @@ -113,6 +121,7 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -120,10 +129,16 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -156,23 +171,29 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -185,10 +206,19 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -212,18 +242,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -237,6 +266,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set # @@ -277,6 +307,7 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -284,15 +315,10 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -# CONFIG_SCTP_HMAC_MD5 is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -305,10 +331,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -316,6 +338,7 @@ CONFIG_NETWORK_SECMARK=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -338,6 +361,7 @@ CONFIG_FIB_RULES=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -359,10 +383,11 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_XIP=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -402,18 +427,13 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_ISCSI_ATTRS is not set CONFIG_SCSI_SAS_ATTRS=m CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_HOST_SMP=y # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set +# CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -428,6 +448,7 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -440,6 +461,10 @@ CONFIG_MII=y # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -447,7 +472,6 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_TC35815 is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set @@ -455,6 +479,7 @@ CONFIG_E100=y # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -470,6 +495,7 @@ CONFIG_E100=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -478,7 +504,6 @@ CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -486,7 +511,6 @@ CONFIG_USB_RTL8150=m # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -505,7 +529,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -532,7 +555,9 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -551,52 +576,62 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_GPIO_TB0219 is not set -# CONFIG_DRM is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Console display driver support @@ -615,6 +650,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -623,15 +659,18 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -657,13 +696,16 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -676,10 +718,6 @@ CONFIG_USB_STORAGE=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -705,17 +743,11 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -740,9 +772,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -751,23 +784,6 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_VR41XX=y - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -782,14 +798,11 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=m +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -818,7 +831,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -833,24 +845,21 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=m # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -871,47 +880,38 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Profiling support -# -# CONFIG_PROFILING is not set - # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="mem=32M console=ttyVR0,115200" +# CONFIG_SAMPLES is not set +CONFIG_CMDLINE="cca=3 mem=32M console=ttyVR0,115200" # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=m +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig index 40d4a40a970e..a5d0f3c55ed1 100644 --- a/arch/mips/configs/tb0287_defconfig +++ b/arch/mips/configs/tb0287_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc2 -# Thu Aug 9 14:03:54 2007 +# Linux kernel version: 2.6.26-rc1 +# Mon May 12 11:55:55 2008 # CONFIG_MIPS=y @@ -10,9 +10,11 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set @@ -26,6 +28,7 @@ CONFIG_MACH_VR41XX=y # CONFIG_PMC_YOSEMITE is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -53,12 +56,17 @@ CONFIG_PCI_VR41XX=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_HOTPLUG_CPU is not set @@ -113,6 +121,7 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -120,10 +129,16 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -156,12 +171,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -173,6 +191,8 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -185,10 +205,19 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -212,18 +241,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -237,6 +265,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set # @@ -278,6 +307,7 @@ CONFIG_INET_TUNNEL=m # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_ADVANCED=y @@ -302,8 +332,6 @@ CONFIG_DEFAULT_BIC=y CONFIG_DEFAULT_TCP_CONG="bic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -320,10 +348,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -331,6 +355,7 @@ CONFIG_NETWORK_SECMARK=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -353,6 +378,7 @@ CONFIG_FIB_RULES=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m @@ -374,10 +400,11 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_XIP=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -416,10 +443,14 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -429,7 +460,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -458,7 +488,9 @@ CONFIG_ATA=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set @@ -472,15 +504,9 @@ CONFIG_PATA_SIL680=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -520,6 +546,7 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -532,6 +559,10 @@ CONFIG_MII=y # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -539,7 +570,6 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_TC35815 is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -551,6 +581,7 @@ CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -563,6 +594,10 @@ CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -584,6 +619,7 @@ CONFIG_VIA_VELOCITY=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -592,7 +628,6 @@ CONFIG_VIA_VELOCITY=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -600,7 +635,6 @@ CONFIG_VIA_VELOCITY=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -622,7 +656,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -649,7 +682,9 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -668,49 +703,53 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_GPIO_TB0219 is not set -# CONFIG_DRM is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # CONFIG_MFD_SM501=y +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y @@ -719,9 +758,11 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set @@ -757,7 +798,14 @@ CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set CONFIG_FB_SM501=y +# CONFIG_FB_COBALT is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -787,6 +835,7 @@ CONFIG_FONT_8x16=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # # USB Input Devices @@ -807,6 +856,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -815,15 +865,18 @@ CONFIG_USB=m CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -849,13 +902,16 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -868,10 +924,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -896,36 +948,14 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -940,25 +970,21 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=y CONFIG_XFS_QUOTA=y -# CONFIG_XFS_SECURITY is not set CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=m +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -987,7 +1013,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1002,24 +1027,21 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=m # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1040,47 +1062,38 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Profiling support -# -# CONFIG_PROFILING is not set - # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" +# CONFIG_SAMPLES is not set +CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set -- cgit v1.2.3 From dab8c6deaf1d654d09c3de8bd4c286d424df255a Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 8 May 2008 23:06:17 +0400 Subject: [MIPS] Au1200: MMC resource size off by one Au12x0 MMC platform device strangely claims 0x41 bytes for its memory-mapped registers. Make it claim the whole 0x80000 instead according to the memory map given in the datasheets. Signed-off-by: Sergei Shtylyov Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/platform.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c index 8cae7753ef79..74d6d4a593be 100644 --- a/arch/mips/au1000/common/platform.c +++ b/arch/mips/au1000/common/platform.c @@ -165,12 +165,12 @@ static struct resource au1xxx_usb_gdt_resources[] = { static struct resource au1xxx_mmc_resources[] = { [0] = { .start = SD0_PHYS_ADDR, - .end = SD0_PHYS_ADDR + 0x40, + .end = SD0_PHYS_ADDR + 0x7ffff, .flags = IORESOURCE_MEM, }, [1] = { .start = SD1_PHYS_ADDR, - .end = SD1_PHYS_ADDR + 0x40, + .end = SD1_PHYS_ADDR + 0x7ffff, .flags = IORESOURCE_MEM, }, [2] = { -- cgit v1.2.3 From 732a675a6303156d1a197dc780b0712bd4b49d46 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Sat, 14 Jun 2008 07:57:25 -0500 Subject: [IA64] Fix CONFIG_IA64_SGI_UV build error Fix build error in CONFIG_IA64_SGI_UV config. (GENERIC builds are ok). Signed-off-by: Jack Steiner Signed-off-by: Tony Luck --- arch/ia64/Makefile | 1 + arch/ia64/uv/kernel/setup.c | 12 ++++++++++++ include/asm-ia64/sn/simulator.h | 7 ++++++- 3 files changed, 19 insertions(+), 1 deletion(-) diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile index 88f1a55c6c94..e67ee3f27698 100644 --- a/arch/ia64/Makefile +++ b/arch/ia64/Makefile @@ -57,6 +57,7 @@ core-$(CONFIG_IA64_GENERIC) += arch/ia64/dig/ core-$(CONFIG_IA64_HP_ZX1) += arch/ia64/dig/ core-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/dig/ core-$(CONFIG_IA64_SGI_SN2) += arch/ia64/sn/ +core-$(CONFIG_IA64_SGI_UV) += arch/ia64/uv/ core-$(CONFIG_KVM) += arch/ia64/kvm/ drivers-$(CONFIG_PCI) += arch/ia64/pci/ diff --git a/arch/ia64/uv/kernel/setup.c b/arch/ia64/uv/kernel/setup.c index 9aa743203c3c..cf5f28ae96c4 100644 --- a/arch/ia64/uv/kernel/setup.c +++ b/arch/ia64/uv/kernel/setup.c @@ -17,6 +17,9 @@ DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info); EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info); +#ifdef CONFIG_IA64_SGI_UV +int sn_prom_type; +#endif struct redir_addr { unsigned long redirect; @@ -64,6 +67,15 @@ void __init uv_setup(char **cmdline_p) m_n_config.s.m_skt = 37; m_n_config.s.n_skt = 0; mmr_base = 0; +#if 0 + /* Need BIOS calls - TDB */ + if (!ia64_sn_is_fake_prom()) + sn_prom_type = 1; + else +#endif + sn_prom_type = 2; + printk(KERN_INFO "Running on medusa with %s PROM\n", + (sn_prom_type == 1) ? "real" : "fake"); } else { get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size); node_id.v = uv_read_local_mmr(UVH_NODE_ID); diff --git a/include/asm-ia64/sn/simulator.h b/include/asm-ia64/sn/simulator.h index c3fd3eb25768..c2611f6cfe33 100644 --- a/include/asm-ia64/sn/simulator.h +++ b/include/asm-ia64/sn/simulator.h @@ -8,7 +8,7 @@ #ifndef _ASM_IA64_SN_SIMULATOR_H #define _ASM_IA64_SN_SIMULATOR_H - +#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_SGI_UV) #define SNMAGIC 0xaeeeeeee8badbeefL #define IS_MEDUSA() ({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn == SNMAGIC;}) @@ -16,5 +16,10 @@ #define IS_RUNNING_ON_SIMULATOR() (sn_prom_type) #define IS_RUNNING_ON_FAKE_PROM() (sn_prom_type == 2) extern int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */ +#else +#define IS_MEDUSA() 0 +#define SIMULATOR_SLEEP() +#define IS_RUNNING_ON_SIMULATOR() 0 +#endif #endif /* _ASM_IA64_SN_SIMULATOR_H */ -- cgit v1.2.3 From b052beb0432616aa4dac2b167e7809feae993991 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 16 Jun 2008 13:36:29 +0100 Subject: MN10300: Kill linux/a.out.h inclusions Kill linux/a.out.h inclusions in the MN10300 arch code. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/process.c | 1 - arch/mn10300/kernel/setup.c | 1 - 2 files changed, 2 deletions(-) diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c index 3b0d579fc15d..9c623c88387b 100644 --- a/arch/mn10300/kernel/process.c +++ b/arch/mn10300/kernel/process.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c index 6b7ce2636851..017121ce896f 100644 --- a/arch/mn10300/kernel/setup.c +++ b/arch/mn10300/kernel/setup.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3 From 702773b16e83fcddc41e0019b8214d3c3cecedbe Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 16 Jun 2008 12:11:54 +0100 Subject: Include in fs/exec.c only for Alpha. We only need it for the /sbin/loader hack for OSF/1 executables, and we don't want to include it otherwise. While we're at it, remove the redundant '&& CONFIG_ARCH_SUPPORTS_AOUT' in the ifdef around that code. It's already dependent on __alpha__, and CONFIG_ARCH_SUPPORTS_AOUT is hard-coded to 'y' there. Signed-off-by: David Woodhouse Acked-by: Peter Korsgaard Signed-off-by: Linus Torvalds --- fs/exec.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/exec.c b/fs/exec.c index 9448f1b50b4a..da94a6f05df3 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include @@ -61,6 +60,11 @@ #include #endif +#ifdef __alpha__ +/* for /sbin/loader handling in search_binary_handler() */ +#include +#endif + int core_uses_pid; char core_pattern[CORENAME_MAX_SIZE] = "core"; int suid_dumpable = 0; @@ -1155,7 +1159,7 @@ int search_binary_handler(struct linux_binprm *bprm,struct pt_regs *regs) { int try,retval; struct linux_binfmt *fmt; -#if defined(__alpha__) && defined(CONFIG_ARCH_SUPPORTS_AOUT) +#ifdef __alpha__ /* handle /sbin/loader.. */ { struct exec * eh = (struct exec *) bprm->buf; -- cgit v1.2.3 From a9e0f5293d4999f93b469af4e70382db800a8204 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 16 Jun 2008 12:18:13 +0100 Subject: Remove last traces of a.out support from ELF loader. In commit d20894a23708c2af75966534f8e4dedb46d48db2 ("Remove a.out interpreter support in ELF loader"), Andi removed support for a.out interpreters from the ELF loader, which was only ever needed for the transition from a.out to ELF. This removes the last traces of that support, in particular the inclusion of . Signed-off-by: David Woodhouse Acked-by: Peter Korsgaard Signed-off-by: Linus Torvalds --- fs/binfmt_elf.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index 0fa95b198e6e..d48ff5f370f4 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include @@ -548,7 +547,6 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs) struct { struct elfhdr elf_ex; struct elfhdr interp_elf_ex; - struct exec interp_ex; } *loc; loc = kmalloc(sizeof(*loc), GFP_KERNEL); @@ -680,7 +678,6 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs) } /* Get the exec headers */ - loc->interp_ex = *((struct exec *)bprm->buf); loc->interp_elf_ex = *((struct elfhdr *)bprm->buf); break; } -- cgit v1.2.3 From 9a8ea36967afad617d9b0930b6fe7592b9ed9772 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 16 Jun 2008 12:18:24 +0100 Subject: Remove #ifdef CONFIG_ARCH_SUPPORTS_AOUT from This file is only included where it makes sense now, so there's no need for the CONFIG_ARCH_SUPPORTS_AOUT conditional -- and that conditional is bad, because we want to export to userspace. Signed-off-by: David Woodhouse Acked-by: Peter Korsgaard Signed-off-by: Linus Torvalds --- include/linux/a.out.h | 8 -------- 1 file changed, 8 deletions(-) diff --git a/include/linux/a.out.h b/include/linux/a.out.h index 208f4e8ed304..e86dfca44589 100644 --- a/include/linux/a.out.h +++ b/include/linux/a.out.h @@ -1,8 +1,6 @@ #ifndef __A_OUT_GNU_H__ #define __A_OUT_GNU_H__ -#ifdef CONFIG_ARCH_SUPPORTS_AOUT - #define __GNU_EXEC_MACROS__ #ifndef __STRUCT_EXEC_OVERRIDE__ @@ -277,10 +275,4 @@ struct relocation_info #endif /* no N_RELOCATION_INFO_DECLARED. */ #endif /*__ASSEMBLY__ */ -#else /* CONFIG_ARCH_SUPPORTS_AOUT */ -#ifndef __ASSEMBLY__ -struct exec { -}; -#endif -#endif /* CONFIG_ARCH_SUPPORTS_AOUT */ #endif /* __A_OUT_GNU_H__ */ -- cgit v1.2.3 From e53d6a152793a38aa334d6f7a4850642ae45cedc Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 16 Jun 2008 12:24:17 +0100 Subject: Export to userspace again. This seems to have been removed accidentally in commit ed7b1889da256977574663689b598d88950bbd23 ("Unexport asm/page.h"), but wasn't supposed to have been -- the original patch at http://lkml.org/lkml/2007/10/30/144 just moved it from $(header-y) to $(unifdef-y) Signed-off-by: David Woodhouse Acked-by: Peter Korsgaard Signed-off-by: Linus Torvalds --- include/linux/Kbuild | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 93b98856007a..b6fbb2573e88 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -166,6 +166,9 @@ unifdef-y += acct.h unifdef-y += adb.h unifdef-y += adfs_fs.h unifdef-y += agpgart.h +ifeq ($(wildcard include/asm-$(SRCARCH)/a.out.h),include/asm-$(SRCARCH)/a.out.h) +unifdef-y += a.out.h +endif unifdef-y += apm_bios.h unifdef-y += atalk.h unifdef-y += atmdev.h -- cgit v1.2.3 From 3878f110f71a0971ff7acc15dd6db711b6ef37c6 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Fri, 30 May 2008 15:30:49 -0700 Subject: ocfs2: Move the hb_ctl_path sysctl into the stack glue. ocfs2 needs to call out to the hb_ctl program at unmount for all cluster stacks. The first step is to move the hb_ctl_path sysctl out of the o2cb code and into the generic stack glue. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/cluster/nodemanager.c | 74 +----------------------------------- fs/ocfs2/cluster/nodemanager.h | 4 -- fs/ocfs2/stack_o2cb.c | 2 +- fs/ocfs2/stackglue.c | 85 ++++++++++++++++++++++++++++++++++++++++++ fs/ocfs2/stackglue.h | 2 + 5 files changed, 89 insertions(+), 78 deletions(-) diff --git a/fs/ocfs2/cluster/nodemanager.c b/fs/ocfs2/cluster/nodemanager.c index cf9401e8cd0b..cfdb08b484ed 100644 --- a/fs/ocfs2/cluster/nodemanager.c +++ b/fs/ocfs2/cluster/nodemanager.c @@ -21,7 +21,6 @@ #include #include -#include #include #include "tcp.h" @@ -36,65 +35,6 @@ * cluster references throughout where nodes are looked up */ struct o2nm_cluster *o2nm_single_cluster = NULL; -#define OCFS2_MAX_HB_CTL_PATH 256 -static char ocfs2_hb_ctl_path[OCFS2_MAX_HB_CTL_PATH] = "/sbin/ocfs2_hb_ctl"; - -static ctl_table ocfs2_nm_table[] = { - { - .ctl_name = 1, - .procname = "hb_ctl_path", - .data = ocfs2_hb_ctl_path, - .maxlen = OCFS2_MAX_HB_CTL_PATH, - .mode = 0644, - .proc_handler = &proc_dostring, - .strategy = &sysctl_string, - }, - { .ctl_name = 0 } -}; - -static ctl_table ocfs2_mod_table[] = { - { - .ctl_name = FS_OCFS2_NM, - .procname = "nm", - .data = NULL, - .maxlen = 0, - .mode = 0555, - .child = ocfs2_nm_table - }, - { .ctl_name = 0} -}; - -static ctl_table ocfs2_kern_table[] = { - { - .ctl_name = FS_OCFS2, - .procname = "ocfs2", - .data = NULL, - .maxlen = 0, - .mode = 0555, - .child = ocfs2_mod_table - }, - { .ctl_name = 0} -}; - -static ctl_table ocfs2_root_table[] = { - { - .ctl_name = CTL_FS, - .procname = "fs", - .data = NULL, - .maxlen = 0, - .mode = 0555, - .child = ocfs2_kern_table - }, - { .ctl_name = 0 } -}; - -static struct ctl_table_header *ocfs2_table_header = NULL; - -const char *o2nm_get_hb_ctl_path(void) -{ - return ocfs2_hb_ctl_path; -} -EXPORT_SYMBOL_GPL(o2nm_get_hb_ctl_path); struct o2nm_node *o2nm_get_node_by_num(u8 node_num) { @@ -941,9 +881,6 @@ void o2nm_undepend_this_node(void) static void __exit exit_o2nm(void) { - if (ocfs2_table_header) - unregister_sysctl_table(ocfs2_table_header); - /* XXX sync with hb callbacks and shut down hb? */ o2net_unregister_hb_callbacks(); configfs_unregister_subsystem(&o2nm_cluster_group.cs_subsys); @@ -964,16 +901,9 @@ static int __init init_o2nm(void) if (ret) goto out; - ocfs2_table_header = register_sysctl_table(ocfs2_root_table); - if (!ocfs2_table_header) { - printk(KERN_ERR "nodemanager: unable to register sysctl\n"); - ret = -ENOMEM; /* or something. */ - goto out_o2net; - } - ret = o2net_register_hb_callbacks(); if (ret) - goto out_sysctl; + goto out_o2net; config_group_init(&o2nm_cluster_group.cs_subsys.su_group); mutex_init(&o2nm_cluster_group.cs_subsys.su_mutex); @@ -990,8 +920,6 @@ static int __init init_o2nm(void) configfs_unregister_subsystem(&o2nm_cluster_group.cs_subsys); out_callbacks: o2net_unregister_hb_callbacks(); -out_sysctl: - unregister_sysctl_table(ocfs2_table_header); out_o2net: o2net_exit(); out: diff --git a/fs/ocfs2/cluster/nodemanager.h b/fs/ocfs2/cluster/nodemanager.h index 7c860361b8dd..c992ea0da4ad 100644 --- a/fs/ocfs2/cluster/nodemanager.h +++ b/fs/ocfs2/cluster/nodemanager.h @@ -33,10 +33,6 @@ #include #include -#define FS_OCFS2_NM 1 - -const char *o2nm_get_hb_ctl_path(void); - struct o2nm_node { spinlock_t nd_lock; struct config_item nd_item; diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c index bbd1667aa7d3..fb26a7c69c47 100644 --- a/fs/ocfs2/stack_o2cb.c +++ b/fs/ocfs2/stack_o2cb.c @@ -338,7 +338,7 @@ static void o2hb_stop(const char *group) int ret; char *argv[5], *envp[3]; - argv[0] = (char *)o2nm_get_hb_ctl_path(); + argv[0] = (char *)ocfs2_get_hb_ctl_path(); argv[1] = "-K"; argv[2] = "-u"; argv[3] = (char *)group; diff --git a/fs/ocfs2/stackglue.c b/fs/ocfs2/stackglue.c index 119f60cea9cc..fb9b8e0db260 100644 --- a/fs/ocfs2/stackglue.c +++ b/fs/ocfs2/stackglue.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "ocfs2_fs.h" @@ -548,10 +549,92 @@ error: return ret; } +/* + * Sysctl bits + * + * The sysctl lives at /proc/sys/fs/ocfs2/nm/hb_ctl_path. The 'nm' doesn't + * make as much sense in a multiple cluster stack world, but it's safer + * and easier to preserve the name. + */ + +#define FS_OCFS2_NM 1 + +#define OCFS2_MAX_HB_CTL_PATH 256 +static char ocfs2_hb_ctl_path[OCFS2_MAX_HB_CTL_PATH] = "/sbin/ocfs2_hb_ctl"; + +static ctl_table ocfs2_nm_table[] = { + { + .ctl_name = 1, + .procname = "hb_ctl_path", + .data = ocfs2_hb_ctl_path, + .maxlen = OCFS2_MAX_HB_CTL_PATH, + .mode = 0644, + .proc_handler = &proc_dostring, + .strategy = &sysctl_string, + }, + { .ctl_name = 0 } +}; + +static ctl_table ocfs2_mod_table[] = { + { + .ctl_name = FS_OCFS2_NM, + .procname = "nm", + .data = NULL, + .maxlen = 0, + .mode = 0555, + .child = ocfs2_nm_table + }, + { .ctl_name = 0} +}; + +static ctl_table ocfs2_kern_table[] = { + { + .ctl_name = FS_OCFS2, + .procname = "ocfs2", + .data = NULL, + .maxlen = 0, + .mode = 0555, + .child = ocfs2_mod_table + }, + { .ctl_name = 0} +}; + +static ctl_table ocfs2_root_table[] = { + { + .ctl_name = CTL_FS, + .procname = "fs", + .data = NULL, + .maxlen = 0, + .mode = 0555, + .child = ocfs2_kern_table + }, + { .ctl_name = 0 } +}; + +static struct ctl_table_header *ocfs2_table_header = NULL; + +const char *ocfs2_get_hb_ctl_path(void) +{ + return ocfs2_hb_ctl_path; +} +EXPORT_SYMBOL_GPL(ocfs2_get_hb_ctl_path); + + +/* + * Initialization + */ + static int __init ocfs2_stack_glue_init(void) { strcpy(cluster_stack_name, OCFS2_STACK_PLUGIN_O2CB); + ocfs2_table_header = register_sysctl_table(ocfs2_root_table); + if (!ocfs2_table_header) { + printk(KERN_ERR + "ocfs2 stack glue: unable to register sysctl\n"); + return -ENOMEM; /* or something. */ + } + return ocfs2_sysfs_init(); } @@ -559,6 +642,8 @@ static void __exit ocfs2_stack_glue_exit(void) { lproto = NULL; ocfs2_sysfs_exit(); + if (ocfs2_table_header) + unregister_sysctl_table(ocfs2_table_header); } MODULE_AUTHOR("Oracle"); diff --git a/fs/ocfs2/stackglue.h b/fs/ocfs2/stackglue.h index 005e4f170e0f..c9fb01ab6347 100644 --- a/fs/ocfs2/stackglue.h +++ b/fs/ocfs2/stackglue.h @@ -258,4 +258,6 @@ void ocfs2_stack_glue_set_locking_protocol(struct ocfs2_locking_protocol *proto) /* Used by stack plugins */ int ocfs2_stack_glue_register(struct ocfs2_stack_plugin *plugin); void ocfs2_stack_glue_unregister(struct ocfs2_stack_plugin *plugin); +const char *ocfs2_get_hb_ctl_path(void); + #endif /* STACKGLUE_H */ -- cgit v1.2.3 From 9f9a99f4eccc64650e932090cff0ebd07b81e334 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Fri, 30 May 2008 15:43:58 -0700 Subject: ocfs2: Move the call of ocfs2_hb_ctl into the stack glue. Take o2hb_stop() out of the o2cb code and make it part of the generic stack glue as ocfs2_leave_group(). This also allows us to remove the ocfs2_get_hb_ctl_path() function - everything to do with hb_ctl is now part of stackglue.c. o2cb no longer needs a ->hangup() function. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/stack_o2cb.c | 38 -------------------------------------- fs/ocfs2/stackglue.c | 49 ++++++++++++++++++++++++++++++++++++++++--------- fs/ocfs2/stackglue.h | 1 - 3 files changed, 40 insertions(+), 48 deletions(-) diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c index fb26a7c69c47..765ade5ee84a 100644 --- a/fs/ocfs2/stack_o2cb.c +++ b/fs/ocfs2/stack_o2cb.c @@ -333,43 +333,6 @@ static int o2cb_cluster_disconnect(struct ocfs2_cluster_connection *conn, return 0; } -static void o2hb_stop(const char *group) -{ - int ret; - char *argv[5], *envp[3]; - - argv[0] = (char *)ocfs2_get_hb_ctl_path(); - argv[1] = "-K"; - argv[2] = "-u"; - argv[3] = (char *)group; - argv[4] = NULL; - - mlog(0, "Run: %s %s %s %s\n", argv[0], argv[1], argv[2], argv[3]); - - /* minimal command environment taken from cpu_run_sbin_hotplug */ - envp[0] = "HOME=/"; - envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin"; - envp[2] = NULL; - - ret = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC); - if (ret < 0) - mlog_errno(ret); -} - -/* - * Hangup is a hack for tools compatibility. Older ocfs2-tools software - * expects the filesystem to call "ocfs2_hb_ctl" during unmount. This - * happens regardless of whether the DLM got started, so we can't do it - * in ocfs2_cluster_disconnect(). We bring the o2hb_stop() function into - * the glue and provide a "hangup" API for super.c to call. - * - * Other stacks will eventually provide a NULL ->hangup() pointer. - */ -static void o2cb_cluster_hangup(const char *group, int grouplen) -{ - o2hb_stop(group); -} - static int o2cb_cluster_this_node(unsigned int *node) { int node_num; @@ -388,7 +351,6 @@ static int o2cb_cluster_this_node(unsigned int *node) static struct ocfs2_stack_operations o2cb_stack_ops = { .connect = o2cb_cluster_connect, .disconnect = o2cb_cluster_disconnect, - .hangup = o2cb_cluster_hangup, .this_node = o2cb_cluster_this_node, .dlm_lock = o2cb_dlm_lock, .dlm_unlock = o2cb_dlm_unlock, diff --git a/fs/ocfs2/stackglue.c b/fs/ocfs2/stackglue.c index fb9b8e0db260..5f78ff4c76c7 100644 --- a/fs/ocfs2/stackglue.c +++ b/fs/ocfs2/stackglue.c @@ -34,11 +34,13 @@ #define OCFS2_STACK_PLUGIN_O2CB "o2cb" #define OCFS2_STACK_PLUGIN_USER "user" +#define OCFS2_MAX_HB_CTL_PATH 256 static struct ocfs2_locking_protocol *lproto; static DEFINE_SPINLOCK(ocfs2_stack_lock); static LIST_HEAD(ocfs2_stack_list); static char cluster_stack_name[OCFS2_STACK_LABEL_LEN + 1]; +static char ocfs2_hb_ctl_path[OCFS2_MAX_HB_CTL_PATH] = "/sbin/ocfs2_hb_ctl"; /* * The stack currently in use. If not null, active_stack->sp_count > 0, @@ -363,6 +365,42 @@ int ocfs2_cluster_disconnect(struct ocfs2_cluster_connection *conn, } EXPORT_SYMBOL_GPL(ocfs2_cluster_disconnect); +/* + * Leave the group for this filesystem. This is executed by a userspace + * program (stored in ocfs2_hb_ctl_path). + */ +static void ocfs2_leave_group(const char *group) +{ + int ret; + char *argv[5], *envp[3]; + + argv[0] = ocfs2_hb_ctl_path; + argv[1] = "-K"; + argv[2] = "-u"; + argv[3] = (char *)group; + argv[4] = NULL; + + /* minimal command environment taken from cpu_run_sbin_hotplug */ + envp[0] = "HOME=/"; + envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin"; + envp[2] = NULL; + + ret = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC); + if (ret < 0) { + printk(KERN_ERR + "ocfs2: Error %d running user helper " + "\"%s %s %s %s\"\n", + ret, argv[0], argv[1], argv[2], argv[3]); + } +} + +/* + * Hangup is a required post-umount. ocfs2-tools software expects the + * filesystem to call "ocfs2_hb_ctl" during unmount. This happens + * regardless of whether the DLM got started, so we can't do it + * in ocfs2_cluster_disconnect(). The ocfs2_leave_group() function does + * the actual work. + */ void ocfs2_cluster_hangup(const char *group, int grouplen) { BUG_ON(group == NULL); @@ -371,6 +409,8 @@ void ocfs2_cluster_hangup(const char *group, int grouplen) if (active_stack->sp_ops->hangup) active_stack->sp_ops->hangup(group, grouplen); + ocfs2_leave_group(group); + /* cluster_disconnect() was called with hangup_pending==1 */ ocfs2_stack_driver_put(); } @@ -559,9 +599,6 @@ error: #define FS_OCFS2_NM 1 -#define OCFS2_MAX_HB_CTL_PATH 256 -static char ocfs2_hb_ctl_path[OCFS2_MAX_HB_CTL_PATH] = "/sbin/ocfs2_hb_ctl"; - static ctl_table ocfs2_nm_table[] = { { .ctl_name = 1, @@ -613,12 +650,6 @@ static ctl_table ocfs2_root_table[] = { static struct ctl_table_header *ocfs2_table_header = NULL; -const char *ocfs2_get_hb_ctl_path(void) -{ - return ocfs2_hb_ctl_path; -} -EXPORT_SYMBOL_GPL(ocfs2_get_hb_ctl_path); - /* * Initialization diff --git a/fs/ocfs2/stackglue.h b/fs/ocfs2/stackglue.h index c9fb01ab6347..fe3fd2a12821 100644 --- a/fs/ocfs2/stackglue.h +++ b/fs/ocfs2/stackglue.h @@ -258,6 +258,5 @@ void ocfs2_stack_glue_set_locking_protocol(struct ocfs2_locking_protocol *proto) /* Used by stack plugins */ int ocfs2_stack_glue_register(struct ocfs2_stack_plugin *plugin); void ocfs2_stack_glue_unregister(struct ocfs2_stack_plugin *plugin); -const char *ocfs2_get_hb_ctl_path(void); #endif /* STACKGLUE_H */ -- cgit v1.2.3 From 2c39450b39880e162b3eb339672314101f58ee1a Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Fri, 30 May 2008 15:58:26 -0700 Subject: ocfs2: Remove ->hangup() from stack glue operations. The ->hangup() call was only used to execute ocfs2_hb_ctl. Now that the generic stack glue code handles this, the underlying stack drivers don't need to know about it. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/stack_o2cb.c | 3 +-- fs/ocfs2/stack_user.c | 3 +-- fs/ocfs2/stackglue.c | 5 +---- fs/ocfs2/stackglue.h | 18 +++--------------- 4 files changed, 6 insertions(+), 23 deletions(-) diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c index 765ade5ee84a..fcd120f1493a 100644 --- a/fs/ocfs2/stack_o2cb.c +++ b/fs/ocfs2/stack_o2cb.c @@ -317,8 +317,7 @@ out: return rc; } -static int o2cb_cluster_disconnect(struct ocfs2_cluster_connection *conn, - int hangup_pending) +static int o2cb_cluster_disconnect(struct ocfs2_cluster_connection *conn) { struct dlm_ctxt *dlm = conn->cc_lockspace; struct o2dlm_private *priv = conn->cc_private; diff --git a/fs/ocfs2/stack_user.c b/fs/ocfs2/stack_user.c index 6b97d11f6bf8..c021280dd462 100644 --- a/fs/ocfs2/stack_user.c +++ b/fs/ocfs2/stack_user.c @@ -816,8 +816,7 @@ out: return rc; } -static int user_cluster_disconnect(struct ocfs2_cluster_connection *conn, - int hangup_pending) +static int user_cluster_disconnect(struct ocfs2_cluster_connection *conn) { dlm_release_lockspace(conn->cc_lockspace, 2); conn->cc_lockspace = NULL; diff --git a/fs/ocfs2/stackglue.c b/fs/ocfs2/stackglue.c index 5f78ff4c76c7..10e149ae5e3a 100644 --- a/fs/ocfs2/stackglue.c +++ b/fs/ocfs2/stackglue.c @@ -352,7 +352,7 @@ int ocfs2_cluster_disconnect(struct ocfs2_cluster_connection *conn, BUG_ON(conn == NULL); - ret = active_stack->sp_ops->disconnect(conn, hangup_pending); + ret = active_stack->sp_ops->disconnect(conn); /* XXX Should we free it anyway? */ if (!ret) { @@ -406,9 +406,6 @@ void ocfs2_cluster_hangup(const char *group, int grouplen) BUG_ON(group == NULL); BUG_ON(group[grouplen] != '\0'); - if (active_stack->sp_ops->hangup) - active_stack->sp_ops->hangup(group, grouplen); - ocfs2_leave_group(group); /* cluster_disconnect() was called with hangup_pending==1 */ diff --git a/fs/ocfs2/stackglue.h b/fs/ocfs2/stackglue.h index fe3fd2a12821..db56281dd1be 100644 --- a/fs/ocfs2/stackglue.h +++ b/fs/ocfs2/stackglue.h @@ -134,22 +134,10 @@ struct ocfs2_stack_operations { * be freed. Thus, a stack must not return from ->disconnect() * until it will no longer reference the conn pointer. * - * If hangup_pending is zero, ocfs2_cluster_disconnect() will also - * be dropping the reference on the module. + * Once this call returns, the stack glue will be dropping this + * connection's reference on the module. */ - int (*disconnect)(struct ocfs2_cluster_connection *conn, - int hangup_pending); - - /* - * ocfs2_cluster_hangup() exists for compatibility with older - * ocfs2 tools. Only the classic stack really needs it. As such - * ->hangup() is not required of all stacks. See the comment by - * ocfs2_cluster_hangup() for more details. - * - * Note that ocfs2_cluster_hangup() can only be called if - * hangup_pending was passed to ocfs2_cluster_disconnect(). - */ - void (*hangup)(const char *group, int grouplen); + int (*disconnect)(struct ocfs2_cluster_connection *conn); /* * ->this_node() returns the cluster's unique identifier for the -- cgit v1.2.3 From f9ffcedddba5b2fc5ab16ef08bca55af8be2717e Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Mon, 16 Jun 2008 16:38:33 -0700 Subject: pkt_sched: HTB scheduler, change default hysteresis mode to off. The HTB hysteresis mode reduce the CPU load, but at the cost of scheduling accuracy. On ADSL links (512 kbit/s upstream), this inaccuracy introduce significant jitter, enought to disturbe VoIP. For details see my masters thesis (http://www.adsl-optimizer.dk/thesis/), chapter 7, section 7.3.1, pp 69-70. Signed-off-by: Jesper Dangaard Brouer Acked-by: Martin Devera Signed-off-by: David S. Miller --- net/sched/sch_htb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 5bc1ed490180..9134f029ee0f 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -53,7 +53,7 @@ */ #define HTB_HSIZE 16 /* classid hash size */ -#define HTB_HYSTERESIS 1 /* whether to use mode hysteresis for speedup */ +#define HTB_HYSTERESIS 0 /* whether to use mode hysteresis for speedup */ #define HTB_VER 0x30011 /* major must be matched with number suplied by TC as version */ #if HTB_VER >> 16 != TC_HTB_PROTOVER -- cgit v1.2.3 From 47083fc0735f5145b72fc31236d07339dc52b908 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Mon, 16 Jun 2008 16:39:32 -0700 Subject: pkt_sched: Change HTB_HYSTERESIS to a runtime parameter htb_hysteresis. Add a htb_hysteresis parameter to htb_sch.ko and by sysfs magic make it runtime adjustable via /sys/module/sch_htb/parameters/htb_hysteresis mode 640. Signed-off-by: Jesper Dangaard Brouer Acked-by: Martin Devera Signed-off-by: David S. Miller --- net/sched/sch_htb.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 9134f029ee0f..6807c97985a5 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -28,6 +28,7 @@ * $Id: sch_htb.c,v 1.25 2003/12/07 11:08:25 devik Exp devik $ */ #include +#include #include #include #include @@ -53,13 +54,17 @@ */ #define HTB_HSIZE 16 /* classid hash size */ -#define HTB_HYSTERESIS 0 /* whether to use mode hysteresis for speedup */ +static int htb_hysteresis __read_mostly = 0; /* whether to use mode hysteresis for speedup */ #define HTB_VER 0x30011 /* major must be matched with number suplied by TC as version */ #if HTB_VER >> 16 != TC_HTB_PROTOVER #error "Mismatched sch_htb.c and pkt_sch.h" #endif +/* Module parameter and sysfs export */ +module_param (htb_hysteresis, int, 0640); +MODULE_PARM_DESC(htb_hysteresis, "Hysteresis mode, less CPU load, less accurate"); + /* used internaly to keep status of single class */ enum htb_cmode { HTB_CANT_SEND, /* class can't send and can't borrow */ @@ -462,19 +467,21 @@ static void htb_deactivate_prios(struct htb_sched *q, struct htb_class *cl) htb_remove_class_from_row(q, cl, mask); } -#if HTB_HYSTERESIS static inline long htb_lowater(const struct htb_class *cl) { - return cl->cmode != HTB_CANT_SEND ? -cl->cbuffer : 0; + if (htb_hysteresis) + return cl->cmode != HTB_CANT_SEND ? -cl->cbuffer : 0; + else + return 0; } static inline long htb_hiwater(const struct htb_class *cl) { - return cl->cmode == HTB_CAN_SEND ? -cl->buffer : 0; + if (htb_hysteresis) + return cl->cmode == HTB_CAN_SEND ? -cl->buffer : 0; + else + return 0; } -#else -#define htb_lowater(cl) (0) -#define htb_hiwater(cl) (0) -#endif + /** * htb_class_mode - computes and returns current class mode -- cgit v1.2.3 From 2b4743bd6be9fedaa560f8c6dc3997e9ec21b99b Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Mon, 16 Jun 2008 16:48:20 -0700 Subject: ipv6 sit: Avoid extra need for compat layer in PRL management. We've introduced extra need of compat layer for ip_tunnel_prl{} for PRL (Potential Router List) management. Though compat_ioctl is still missing in ipv4/ipv6, let's make the interface more straight-forward and eliminate extra need for nasty compat layer anyway since the interface is new for 2.6.26. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller --- include/linux/if_tunnel.h | 2 +- net/ipv6/sit.c | 44 ++++++++++++++++++++++++-------------------- 2 files changed, 25 insertions(+), 21 deletions(-) diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h index f1fbe9c930d7..d4efe4014705 100644 --- a/include/linux/if_tunnel.h +++ b/include/linux/if_tunnel.h @@ -41,7 +41,7 @@ struct ip_tunnel_prl { __u16 __reserved; __u32 datalen; __u32 __reserved2; - void __user *data; + /* data follows */ }; /* PRL flags */ diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index 3de6ffdaedf2..32e871a6c25a 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -222,15 +222,18 @@ __ipip6_tunnel_locate_prl(struct ip_tunnel *t, __be32 addr) } -static int ipip6_tunnel_get_prl(struct ip_tunnel *t, struct ip_tunnel_prl *a) +static int ipip6_tunnel_get_prl(struct ip_tunnel *t, + struct ip_tunnel_prl __user *a) { - struct ip_tunnel_prl *kp; + struct ip_tunnel_prl kprl, *kp; struct ip_tunnel_prl_entry *prl; unsigned int cmax, c = 0, ca, len; int ret = 0; - cmax = a->datalen / sizeof(*a); - if (cmax > 1 && a->addr != htonl(INADDR_ANY)) + if (copy_from_user(&kprl, a, sizeof(kprl))) + return -EFAULT; + cmax = kprl.datalen / sizeof(kprl); + if (cmax > 1 && kprl.addr != htonl(INADDR_ANY)) cmax = 1; /* For simple GET or for root users, @@ -261,26 +264,25 @@ static int ipip6_tunnel_get_prl(struct ip_tunnel *t, struct ip_tunnel_prl *a) for (prl = t->prl; prl; prl = prl->next) { if (c > cmax) break; - if (a->addr != htonl(INADDR_ANY) && prl->addr != a->addr) + if (kprl.addr != htonl(INADDR_ANY) && prl->addr != kprl.addr) continue; kp[c].addr = prl->addr; kp[c].flags = prl->flags; c++; - if (a->addr != htonl(INADDR_ANY)) + if (kprl.addr != htonl(INADDR_ANY)) break; } out: read_unlock(&ipip6_lock); len = sizeof(*kp) * c; - ret = len ? copy_to_user(a->data, kp, len) : 0; + ret = 0; + if ((len && copy_to_user(a + 1, kp, len)) || put_user(len, &a->datalen)) + ret = -EFAULT; kfree(kp); - if (ret) - return -EFAULT; - a->datalen = len; - return 0; + return ret; } static int @@ -873,11 +875,20 @@ ipip6_tunnel_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) break; case SIOCGETPRL: + err = -EINVAL; + if (dev == sitn->fb_tunnel_dev) + goto done; + err = -ENOENT; + if (!(t = netdev_priv(dev))) + goto done; + err = ipip6_tunnel_get_prl(t, ifr->ifr_ifru.ifru_data); + break; + case SIOCADDPRL: case SIOCDELPRL: case SIOCCHGPRL: err = -EPERM; - if (cmd != SIOCGETPRL && !capable(CAP_NET_ADMIN)) + if (!capable(CAP_NET_ADMIN)) goto done; err = -EINVAL; if (dev == sitn->fb_tunnel_dev) @@ -890,12 +901,6 @@ ipip6_tunnel_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) goto done; switch (cmd) { - case SIOCGETPRL: - err = ipip6_tunnel_get_prl(t, &prl); - if (!err && copy_to_user(ifr->ifr_ifru.ifru_data, - &prl, sizeof(prl))) - err = -EFAULT; - break; case SIOCDELPRL: err = ipip6_tunnel_del_prl(t, &prl); break; @@ -904,8 +909,7 @@ ipip6_tunnel_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) err = ipip6_tunnel_add_prl(t, &prl, cmd == SIOCCHGPRL); break; } - if (cmd != SIOCGETPRL) - netdev_state_change(dev); + netdev_state_change(dev); break; default: -- cgit v1.2.3 From 93653e0448196344d7699ccad395eaebd30359d1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 16 Jun 2008 16:57:40 -0700 Subject: tcp: Revert reset of deferred accept changes in 2.6.26 Ingo's system is still seeing strange behavior, and he reports that is goes away if the rest of the deferred accept changes are reverted too. Therefore this reverts e4c78840284f3f51b1896cf3936d60a6033c4d2c ("[TCP]: TCP_DEFER_ACCEPT updates - dont retxmt synack") and 539fae89bebd16ebeafd57a87169bc56eb530d76 ("[TCP]: TCP_DEFER_ACCEPT updates - defer timeout conflicts with max_thresh"). Just like the other revert, these ideas can be revisited for 2.6.27 Signed-off-by: David S. Miller --- net/ipv4/inet_connection_sock.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c index 045e799d3e1d..ec834480abe7 100644 --- a/net/ipv4/inet_connection_sock.c +++ b/net/ipv4/inet_connection_sock.c @@ -466,9 +466,9 @@ void inet_csk_reqsk_queue_prune(struct sock *parent, reqp=&lopt->syn_table[i]; while ((req = *reqp) != NULL) { if (time_after_eq(now, req->expires)) { - if ((req->retrans < (inet_rsk(req)->acked ? max_retries : thresh)) && - (inet_rsk(req)->acked || - !req->rsk_ops->rtx_syn_ack(parent, req))) { + if ((req->retrans < thresh || + (inet_rsk(req)->acked && req->retrans < max_retries)) + && !req->rsk_ops->rtx_syn_ack(parent, req)) { unsigned long timeo; if (req->retrans++ == 0) -- cgit v1.2.3 From 80896a3584bbff9ff9ad4dde735517c4de68d736 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 16 Jun 2008 16:59:55 -0700 Subject: sctp: Correctly cleanup procfs entries upon failure. This patch remove the proc fs entry which has been created if fail to set up proc fs entry for the SCTP protocol. Signed-off-by: Wei Yongjun Acked-by: Neil Horman Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/protocol.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index b435a193c5df..9258dfe784ae 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -108,14 +108,23 @@ static __init int sctp_proc_init(void) } if (sctp_snmp_proc_init()) - goto out_nomem; + goto out_snmp_proc_init; if (sctp_eps_proc_init()) - goto out_nomem; + goto out_eps_proc_init; if (sctp_assocs_proc_init()) - goto out_nomem; + goto out_assocs_proc_init; return 0; +out_assocs_proc_init: + sctp_eps_proc_exit(); +out_eps_proc_init: + sctp_snmp_proc_exit(); +out_snmp_proc_init: + if (proc_net_sctp) { + proc_net_sctp = NULL; + remove_proc_entry("sctp", init_net.proc_net); + } out_nomem: return -ENOMEM; } -- cgit v1.2.3 From 319fa2a24f652dc35e613360c4532b8d2a771add Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Mon, 16 Jun 2008 17:00:29 -0700 Subject: sctp: Correclty set changeover_active for SFR-CACC Right now, any time we set a primary transport we set the changeover_active flag. As a result, we invoke SFR-CACC even when there has been no changeover events. Only set changeover_active, when there is a true changeover event, i.e. we had a primary path and we are changing to another transport. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/associola.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/net/sctp/associola.c b/net/sctp/associola.c index 532634861db1..024c3ebd9661 100644 --- a/net/sctp/associola.c +++ b/net/sctp/associola.c @@ -474,6 +474,15 @@ static void sctp_association_destroy(struct sctp_association *asoc) void sctp_assoc_set_primary(struct sctp_association *asoc, struct sctp_transport *transport) { + int changeover = 0; + + /* it's a changeover only if we already have a primary path + * that we are changing + */ + if (asoc->peer.primary_path != NULL && + asoc->peer.primary_path != transport) + changeover = 1 ; + asoc->peer.primary_path = transport; /* Set a default msg_name for events. */ @@ -499,12 +508,12 @@ void sctp_assoc_set_primary(struct sctp_association *asoc, * double switch to the same destination address. */ if (transport->cacc.changeover_active) - transport->cacc.cycling_changeover = 1; + transport->cacc.cycling_changeover = changeover; /* 2) The sender MUST set CHANGEOVER_ACTIVE to indicate that * a changeover has occurred. */ - transport->cacc.changeover_active = 1; + transport->cacc.changeover_active = changeover; /* 3) The sender MUST store the next TSN to be sent in * next_tsn_at_change. -- cgit v1.2.3 From 6de329e26caed7bbbf51229c80f3948549d3c010 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 16 Jun 2008 17:02:28 -0700 Subject: net: Fix test for VLAN TX checksum offload capability Selected device feature bits can be propagated to VLAN devices, so we can make use of TX checksum offload and TSO on VLAN-tagged packets. However, if the physical device does not do VLAN tag insertion or generic checksum offload then the test for TX checksum offload in dev_queue_xmit() will see a protocol of htons(ETH_P_8021Q) and yield false. This splits the checksum offload test into two functions: - can_checksum_protocol() tests a given protocol against a feature bitmask - dev_can_checksum() first tests the skb protocol against the device features; if that fails and the protocol is htons(ETH_P_8021Q) then it tests the encapsulated protocol against the effective device features for VLANs Signed-off-by: Ben Hutchings Acked-by: Patrick McHardy Signed-off-by: David S. Miller --- net/core/dev.c | 34 ++++++++++++++++++++++++++-------- 1 file changed, 26 insertions(+), 8 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 582963077877..68d8df0992ab 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -119,6 +119,7 @@ #include #include #include +#include #include "net-sysfs.h" @@ -1362,6 +1363,29 @@ void netif_device_attach(struct net_device *dev) } EXPORT_SYMBOL(netif_device_attach); +static bool can_checksum_protocol(unsigned long features, __be16 protocol) +{ + return ((features & NETIF_F_GEN_CSUM) || + ((features & NETIF_F_IP_CSUM) && + protocol == htons(ETH_P_IP)) || + ((features & NETIF_F_IPV6_CSUM) && + protocol == htons(ETH_P_IPV6))); +} + +static bool dev_can_checksum(struct net_device *dev, struct sk_buff *skb) +{ + if (can_checksum_protocol(dev->features, skb->protocol)) + return true; + + if (skb->protocol == htons(ETH_P_8021Q)) { + struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data; + if (can_checksum_protocol(dev->features & dev->vlan_features, + veh->h_vlan_encapsulated_proto)) + return true; + } + + return false; +} /* * Invalidate hardware checksum when packet is to be mangled, and @@ -1640,14 +1664,8 @@ int dev_queue_xmit(struct sk_buff *skb) if (skb->ip_summed == CHECKSUM_PARTIAL) { skb_set_transport_header(skb, skb->csum_start - skb_headroom(skb)); - - if (!(dev->features & NETIF_F_GEN_CSUM) && - !((dev->features & NETIF_F_IP_CSUM) && - skb->protocol == htons(ETH_P_IP)) && - !((dev->features & NETIF_F_IPV6_CSUM) && - skb->protocol == htons(ETH_P_IPV6))) - if (skb_checksum_help(skb)) - goto out_kfree_skb; + if (!dev_can_checksum(dev, skb) && skb_checksum_help(skb)) + goto out_kfree_skb; } gso: -- cgit v1.2.3 From 68be802cd5ad040fe8cfa33ce3031405df2d9117 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 16 Jun 2008 17:03:32 -0700 Subject: raw: Restore /proc/net/raw correct behavior I just noticed "cat /proc/net/raw" was buggy, missing '\n' separators. I believe this was introduced by commit 8cd850efa4948d57a2ed836911cfd1ab299e89c6 ([RAW]: Cleanup IPv4 raw_seq_show.) This trivial patch restores correct behavior, and applies to current Linus tree (should also be applied to stable tree as well.) Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/raw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c index e7e091d365ff..37a1ecd9d600 100644 --- a/net/ipv4/raw.c +++ b/net/ipv4/raw.c @@ -934,7 +934,7 @@ static void raw_sock_seq_show(struct seq_file *seq, struct sock *sp, int i) srcp = inet->num; seq_printf(seq, "%4d: %08X:%04X %08X:%04X" - " %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %d", + " %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %d\n", i, src, srcp, dest, destp, sp->sk_state, atomic_read(&sp->sk_wmem_alloc), atomic_read(&sp->sk_rmem_alloc), -- cgit v1.2.3 From a9d246dbb07cf0bd32bbfc5d184ed738bf2af4f8 Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Mon, 16 Jun 2008 17:07:16 -0700 Subject: ipv4: Remove unused definitions in net/ipv4/tcp_ipv4.c. 1) Remove ICMP_MIN_LENGTH, as it is unused. 2) Remove unneeded tcp_v4_send_check() declaration. Signed-off-by: Rami Rosen Signed-off-by: David S. Miller --- net/ipv4/tcp_ipv4.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 97a230026e13..12695be2c255 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -85,10 +85,6 @@ int sysctl_tcp_tw_reuse __read_mostly; int sysctl_tcp_low_latency __read_mostly; -/* Check TCP sequence numbers in ICMP packets. */ -#define ICMP_MIN_LENGTH 8 - -void tcp_v4_send_check(struct sock *sk, int len, struct sk_buff *skb); #ifdef CONFIG_TCP_MD5SIG static struct tcp_md5sig_key *tcp_v4_md5_do_lookup(struct sock *sk, -- cgit v1.2.3 From 27141666b69f535a4d63d7bc6d9e84ee5032f82a Mon Sep 17 00:00:00 2001 From: "Jorge Boncompte [DTI2]" Date: Mon, 16 Jun 2008 17:15:33 -0700 Subject: atm: [br2684] Fix oops due to skb->dev being NULL It happens that if a packet arrives in a VC between the call to open it on the hardware and the call to change the backend to br2684, br2684_regvcc processes the packet and oopses dereferencing skb->dev because it is NULL before the call to br2684_push(). Signed-off-by: Jorge Boncompte [DTI2] Signed-off-by: Chas Williams --- net/atm/br2684.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/atm/br2684.c b/net/atm/br2684.c index 9d52ebfc1962..ac6035046adc 100644 --- a/net/atm/br2684.c +++ b/net/atm/br2684.c @@ -518,9 +518,9 @@ static int br2684_regvcc(struct atm_vcc *atmvcc, void __user * arg) struct sk_buff *next = skb->next; skb->next = skb->prev = NULL; + br2684_push(atmvcc, skb); BRPRIV(skb->dev)->stats.rx_bytes -= skb->len; BRPRIV(skb->dev)->stats.rx_packets--; - br2684_push(atmvcc, skb); skb = next; } -- cgit v1.2.3 From c0ed0b60f2c36acfebb53384a3b24d13b3a09309 Mon Sep 17 00:00:00 2001 From: "Jorge Boncompte [DTI2]" Date: Mon, 16 Jun 2008 17:16:04 -0700 Subject: atm: [iphase] set drvdata before enabling interrupts Signed-off-by: Jorge Boncompte [DTI2] Signed-off-by: Chas Williams Signed-off-by: David S. Miller --- drivers/atm/iphase.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index 5c28ca7380ff..800c09e128ee 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -3198,6 +3198,8 @@ static int __devinit ia_init_one(struct pci_dev *pdev, IF_INIT(printk("dev_id = 0x%x iadev->LineRate = %d \n", (u32)dev, iadev->LineRate);) + pci_set_drvdata(pdev, dev); + ia_dev[iadev_count] = iadev; _ia_dev[iadev_count] = dev; iadev_count++; @@ -3219,8 +3221,6 @@ static int __devinit ia_init_one(struct pci_dev *pdev, iadev->next_board = ia_boards; ia_boards = dev; - pci_set_drvdata(pdev, dev); - return 0; err_out_deregister_dev: -- cgit v1.2.3 From d6c1d704ab5d2e13bebb096e415156a9c54a3d32 Mon Sep 17 00:00:00 2001 From: "Jorge Boncompte [DTI2]" Date: Mon, 16 Jun 2008 17:16:35 -0700 Subject: atm: [iphase] doesn't call phy->start due to a bogus #ifndef This causes the suni driver to oops if you try to use sonetdiag to get the statistics. Also add the corresponding phy->stop call to fix another oops if you try to remove the module. Signed-off-by: Jorge Boncompte [DTI2] Signed-off-by: Chas Williams Signed-off-by: David S. Miller --- drivers/atm/iphase.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index 800c09e128ee..139fce6968a6 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -2562,17 +2562,11 @@ static int __devinit ia_start(struct atm_dev *dev) error = suni_init(dev); if (error) goto err_free_rx; - /* - * Enable interrupt on loss of signal - * SUNI_RSOP_CIE - 0x10 - * SUNI_RSOP_CIE_LOSE - 0x04 - */ - ia_phy_put(dev, ia_phy_get(dev, 0x10) | 0x04, 0x10); -#ifndef MODULE - error = dev->phy->start(dev); - if (error) - goto err_free_rx; -#endif + if (dev->phy->start) { + error = dev->phy->start(dev); + if (error) + goto err_free_rx; + } /* Get iadev->carrier_detect status */ IaFrontEndIntr(iadev); } @@ -3238,9 +3232,14 @@ static void __devexit ia_remove_one(struct pci_dev *pdev) struct atm_dev *dev = pci_get_drvdata(pdev); IADEV *iadev = INPH_IA_DEV(dev); - ia_phy_put(dev, ia_phy_get(dev,0x10) & ~(0x4), 0x10); + /* Disable phy interrupts */ + ia_phy_put(dev, ia_phy_get(dev, SUNI_RSOP_CIE) & ~(SUNI_RSOP_CIE_LOSE), + SUNI_RSOP_CIE); udelay(1); + if (dev->phy && dev->phy->stop) + dev->phy->stop(dev); + /* De-register device */ free_irq(iadev->irq, dev); iadev_count--; -- cgit v1.2.3 From 059e3779b59527150e1d1942026ec149192cbf77 Mon Sep 17 00:00:00 2001 From: Chas Williams Date: Mon, 16 Jun 2008 17:17:31 -0700 Subject: atm: [he] only support suni driver on multimode interfaces Signed-off-by: Chas Williams Signed-off-by: David S. Miller --- drivers/atm/he.c | 3 ++- drivers/atm/he.h | 13 ++++--------- 2 files changed, 6 insertions(+), 10 deletions(-) diff --git a/drivers/atm/he.c b/drivers/atm/he.c index ffc4a5a41946..320320e3dfb3 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -1542,7 +1542,8 @@ he_start(struct atm_dev *dev) /* initialize framer */ #ifdef CONFIG_ATM_HE_USE_SUNI - suni_init(he_dev->atm_dev); + if (he_isMM(he_dev)) + suni_init(he_dev->atm_dev); if (he_dev->atm_dev->phy && he_dev->atm_dev->phy->start) he_dev->atm_dev->phy->start(he_dev->atm_dev); #endif /* CONFIG_ATM_HE_USE_SUNI */ diff --git a/drivers/atm/he.h b/drivers/atm/he.h index fe6cd15a78a4..b87d6ccabac1 100644 --- a/drivers/atm/he.h +++ b/drivers/atm/he.h @@ -267,13 +267,7 @@ struct he_dev { char prod_id[30]; char mac_addr[6]; - int media; /* - * 0x26 = HE155 MM - * 0x27 = HE622 MM - * 0x46 = HE155 SM - * 0x47 = HE622 SM - */ - + int media; unsigned int vcibits, vpibits; unsigned int cells_per_row; @@ -392,6 +386,7 @@ struct he_vcc #define HE_DEV(dev) ((struct he_dev *) (dev)->dev_data) #define he_is622(dev) ((dev)->media & 0x1) +#define he_isMM(dev) ((dev)->media & 0x20) #define HE_REGMAP_SIZE 0x100000 @@ -876,8 +871,8 @@ struct he_vcc #define M_SN 0x3a /* integer */ #define MEDIA 0x3e /* integer */ #define HE155MM 0x26 -#define HE155SM 0x27 -#define HE622MM 0x46 +#define HE622MM 0x27 +#define HE155SM 0x46 #define HE622SM 0x47 #define MAC_ADDR 0x42 /* char[] */ -- cgit v1.2.3 From 7e903c2ae36efb526eacab3b25d00e90424bd8a8 Mon Sep 17 00:00:00 2001 From: Eric Kinzie Date: Mon, 16 Jun 2008 17:18:18 -0700 Subject: atm: [br2864] fix routed vcmux support From: Eric Kinzie Signed-off-by: Chas Williams Signed-off-by: David S. Miller --- net/atm/br2684.c | 76 ++++++++++++++++++++++++++++++++------------------------ 1 file changed, 44 insertions(+), 32 deletions(-) diff --git a/net/atm/br2684.c b/net/atm/br2684.c index ac6035046adc..05fafdc2eea3 100644 --- a/net/atm/br2684.c +++ b/net/atm/br2684.c @@ -188,10 +188,13 @@ static int br2684_xmit_vcc(struct sk_buff *skb, struct br2684_dev *brdev, return 0; } } - } else { - skb_push(skb, 2); - if (brdev->payload == p_bridged) + } else { /* e_vc */ + if (brdev->payload == p_bridged) { + skb_push(skb, 2); memset(skb->data, 0, 2); + } else { /* p_routed */ + skb_pull(skb, ETH_HLEN); + } } skb_debug(skb); @@ -377,11 +380,8 @@ static void br2684_push(struct atm_vcc *atmvcc, struct sk_buff *skb) (skb->data + 6, ethertype_ipv4, sizeof(ethertype_ipv4)) == 0) skb->protocol = __constant_htons(ETH_P_IP); - else { - brdev->stats.rx_errors++; - dev_kfree_skb(skb); - return; - } + else + goto error; skb_pull(skb, sizeof(llc_oui_ipv4)); skb_reset_network_header(skb); skb->pkt_type = PACKET_HOST; @@ -394,44 +394,56 @@ static void br2684_push(struct atm_vcc *atmvcc, struct sk_buff *skb) (memcmp(skb->data, llc_oui_pid_pad, 7) == 0)) { skb_pull(skb, sizeof(llc_oui_pid_pad)); skb->protocol = eth_type_trans(skb, net_dev); - } else { - brdev->stats.rx_errors++; - dev_kfree_skb(skb); - return; - } + } else + goto error; - } else { - /* first 2 chars should be 0 */ - if (*((u16 *) (skb->data)) != 0) { - brdev->stats.rx_errors++; - dev_kfree_skb(skb); - return; + } else { /* e_vc */ + if (brdev->payload == p_routed) { + struct iphdr *iph; + + skb_reset_network_header(skb); + iph = ip_hdr(skb); + if (iph->version == 4) + skb->protocol = __constant_htons(ETH_P_IP); + else if (iph->version == 6) + skb->protocol = __constant_htons(ETH_P_IPV6); + else + goto error; + skb->pkt_type = PACKET_HOST; + } else { /* p_bridged */ + /* first 2 chars should be 0 */ + if (*((u16 *) (skb->data)) != 0) + goto error; + skb_pull(skb, BR2684_PAD_LEN); + skb->protocol = eth_type_trans(skb, net_dev); } - skb_pull(skb, BR2684_PAD_LEN + ETH_HLEN); /* pad, dstmac, srcmac, ethtype */ - skb->protocol = eth_type_trans(skb, net_dev); } #ifdef CONFIG_ATM_BR2684_IPFILTER - if (unlikely(packet_fails_filter(skb->protocol, brvcc, skb))) { - brdev->stats.rx_dropped++; - dev_kfree_skb(skb); - return; - } + if (unlikely(packet_fails_filter(skb->protocol, brvcc, skb))) + goto dropped; #endif /* CONFIG_ATM_BR2684_IPFILTER */ skb->dev = net_dev; ATM_SKB(skb)->vcc = atmvcc; /* needed ? */ pr_debug("received packet's protocol: %x\n", ntohs(skb->protocol)); skb_debug(skb); - if (unlikely(!(net_dev->flags & IFF_UP))) { - /* sigh, interface is down */ - brdev->stats.rx_dropped++; - dev_kfree_skb(skb); - return; - } + /* sigh, interface is down? */ + if (unlikely(!(net_dev->flags & IFF_UP))) + goto dropped; brdev->stats.rx_packets++; brdev->stats.rx_bytes += skb->len; memset(ATM_SKB(skb), 0, sizeof(struct atm_skb_data)); netif_rx(skb); + return; + +dropped: + brdev->stats.rx_dropped++; + goto free_skb; +error: + brdev->stats.rx_errors++; +free_skb: + dev_kfree_skb(skb); + return; } /* -- cgit v1.2.3 From 28e84ab3abafb0f9c9573993626abe6ca3fa8eb1 Mon Sep 17 00:00:00 2001 From: "Robert T. Johnson" Date: Mon, 16 Jun 2008 17:20:52 -0700 Subject: atm: [he] limit queries to the device's register space From: "Robert T. Johnson" Signed-off-by: Chas Williams --- drivers/atm/he.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/atm/he.c b/drivers/atm/he.c index 320320e3dfb3..fc636a3429cf 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -2845,10 +2845,15 @@ he_ioctl(struct atm_dev *atm_dev, unsigned int cmd, void __user *arg) if (copy_from_user(®, arg, sizeof(struct he_ioctl_reg))) return -EFAULT; - + spin_lock_irqsave(&he_dev->global_lock, flags); switch (reg.type) { case HE_REGTYPE_PCI: + if (reg.addr < 0 || reg.addr >= HE_REGMAP_SIZE) { + err = -EINVAL; + break; + } + reg.val = he_readl(he_dev, reg.addr); break; case HE_REGTYPE_RCM: -- cgit v1.2.3 From 65c3e4715b1b934f8dcc002d9f46b4371ca7a9b1 Mon Sep 17 00:00:00 2001 From: Chas Williams Date: Mon, 16 Jun 2008 17:21:27 -0700 Subject: atm: [he] send idle cells instead of unassigned when in SDH mode Signed-off-by: Chas Williams Signed-off-by: David S. Miller --- drivers/atm/he.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/atm/he.c b/drivers/atm/he.c index fc636a3429cf..ea495b21f916 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -1555,6 +1555,7 @@ he_start(struct atm_dev *dev) val = he_phy_get(he_dev->atm_dev, SUNI_TPOP_APM); val = (val & ~SUNI_TPOP_APM_S) | (SUNI_TPOP_S_SDH << SUNI_TPOP_APM_S_SHIFT); he_phy_put(he_dev->atm_dev, val, SUNI_TPOP_APM); + he_phy_put(he_dev->atm_dev, SUNI_TACP_IUCHP_CLP, SUNI_TACP_IUCHP); } /* 5.1.12 enable transmit and receive */ -- cgit v1.2.3 From 95e904c7da715aa2dbfb595da66b63de37a0bb04 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Sun, 11 May 2008 05:55:33 +0530 Subject: sched: fix defined-but-unused warning Fix this warning, which appears with !CONFIG_SMP: kernel/sched.c:1216: warning: `init_hrtick' defined but not used Signed-off-by: Rabin Vincent Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/sched.c b/kernel/sched.c index eaf6751e7612..04228524d160 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1127,6 +1127,7 @@ static enum hrtimer_restart hrtick(struct hrtimer *timer) return HRTIMER_NORESTART; } +#ifdef CONFIG_SMP static void hotplug_hrtick_disable(int cpu) { struct rq *rq = cpu_rq(cpu); @@ -1182,6 +1183,7 @@ static void init_hrtick(void) { hotcpu_notifier(hotplug_hrtick, 0); } +#endif /* CONFIG_SMP */ static void init_rq_hrtick(struct rq *rq) { -- cgit v1.2.3 From 2f6a77d56523c14651236bc401a99b0e2aca2fdd Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Tue, 17 Jun 2008 11:47:27 -0400 Subject: Input: i8042 - retry failed CTR writes when resuming There are systems that fail in i8042_resume() with i8042: Can't write CTR to resume as i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR) fails even though the controller claimed itself to be ready before. One retry after failing write fixes the problems on the failing systems. Reported-by: Helmut Schaa Signed-off-by: Jiri Kosina Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 592ff55b62d0..170f71ee5772 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -952,8 +952,12 @@ static int i8042_resume(struct platform_device *dev) i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS; i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT); if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { - printk(KERN_ERR "i8042: Can't write CTR to resume\n"); - return -EIO; + printk(KERN_WARNING "i8042: Can't write CTR to resume, retrying...\n"); + msleep(50); + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + printk(KERN_ERR "i8042: CTR write retry failed\n"); + return -EIO; + } } -- cgit v1.2.3 From 90d95ef617a535a8832bdcb8dee07bf591e5dd82 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 17 Jun 2008 11:56:55 -0400 Subject: Input: appletouch - implement reset-resume logic On some boxes the touchpad needs to be reinitialized after resume to make it function again. This fixes bugzilla #10825. Signed-off-by: Oliver Neukum Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/appletouch.c | 49 +++++++++++++++++++++++++++++++++------- drivers/usb/core/quirks.c | 3 +++ 2 files changed, 44 insertions(+), 8 deletions(-) diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index 8dd3942f3022..ce6fdec19e14 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -589,6 +589,21 @@ static void atp_close(struct input_dev *input) dev->open = 0; } +static int atp_handle_geyser(struct atp *dev) +{ + struct usb_device *udev = dev->udev; + + if (!atp_is_fountain(dev)) { + /* switch to raw sensor mode */ + if (atp_geyser_init(udev)) + return -EIO; + + printk(KERN_INFO "appletouch: Geyser mode initialized.\n"); + } + + return 0; +} + static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id) { struct atp *dev; @@ -633,14 +648,6 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id else dev->datalen = 81; - if (!atp_is_fountain(dev)) { - /* switch to raw sensor mode */ - if (atp_geyser_init(udev)) - goto err_free_devs; - - printk(KERN_INFO "appletouch: Geyser mode initialized.\n"); - } - dev->urb = usb_alloc_urb(0, GFP_KERNEL); if (!dev->urb) goto err_free_devs; @@ -654,6 +661,10 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id usb_rcvintpipe(udev, int_in_endpointAddr), dev->data, dev->datalen, atp_complete, dev, 1); + error = atp_handle_geyser(dev); + if (error) + goto err_free_buffer; + usb_make_path(udev, dev->phys, sizeof(dev->phys)); strlcat(dev->phys, "/input0", sizeof(dev->phys)); @@ -744,6 +755,20 @@ static void atp_disconnect(struct usb_interface *iface) printk(KERN_INFO "input: appletouch disconnected\n"); } +static int atp_recover(struct atp *dev) +{ + int error; + + error = atp_handle_geyser(dev); + if (error) + return error; + + if (dev->open && usb_submit_urb(dev->urb, GFP_ATOMIC)) + return -EIO; + + return 0; +} + static int atp_suspend(struct usb_interface *iface, pm_message_t message) { struct atp *dev = usb_get_intfdata(iface); @@ -764,12 +789,20 @@ static int atp_resume(struct usb_interface *iface) return 0; } +static int atp_reset_resume(struct usb_interface *iface) +{ + struct atp *dev = usb_get_intfdata(iface); + + return atp_recover(dev); +} + static struct usb_driver atp_driver = { .name = "appletouch", .probe = atp_probe, .disconnect = atp_disconnect, .suspend = atp_suspend, .resume = atp_resume, + .reset_resume = atp_reset_resume, .id_table = atp_table, }; diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 2e2019390290..ec15f1dd1d0b 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -47,6 +47,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Edirol SD-20 */ { USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME }, + /* appletouch */ + { USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME }, + /* M-Systems Flash Disk Pioneers */ { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME }, -- cgit v1.2.3 From 58c2709c2b551704f289cb3442a41d2a0cf40b6e Mon Sep 17 00:00:00 2001 From: Thomas Mingarelli Date: Thu, 12 Jun 2008 20:20:32 +0000 Subject: Revert "[WATCHDOG] make watchdog/hpwdt.c:asminline_call() static" The driver needs the asmlinkage tag and the CFLAGS line in the Makefile. Without it the driver doesn't work. Signed-off-by: Thomas Mingarelli Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/hpwdt.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 6a63535fc04d..2bc1f74433ce 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -145,8 +145,8 @@ MODULE_DEVICE_TABLE(pci, hpwdt_devices); #define HPWDT_ARCH 32 -static void asminline_call(struct cmn_registers *pi86Regs, - unsigned long *pRomEntry) +asmlinkage void asminline_call(struct cmn_registers *pi86Regs, + unsigned long *pRomEntry) { asm("pushl %ebp \n\t" "movl %esp, %ebp \n\t" @@ -333,8 +333,8 @@ static int __devinit detect_cru_service(void) #define HPWDT_ARCH 64 -static void asminline_call(struct cmn_registers *pi86Regs, - unsigned long *pRomEntry) +asmlinkage void asminline_call(struct cmn_registers *pi86Regs, + unsigned long *pRomEntry) { asm("pushq %rbp \n\t" "movq %rsp, %rbp \n\t" -- cgit v1.2.3 From 4dc7347a3b4a76705b7fd00b271847dd10cf5a32 Mon Sep 17 00:00:00 2001 From: Thomas Mingarelli Date: Thu, 12 Jun 2008 20:20:32 +0000 Subject: [WATCHDOG] hpwdt: Add CFLAGS to get driver working To get this driver working we need the CFLAGS_hpwdt.o += -O in the Makefile. Signed-off-by: Thomas Mingarelli Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 25b352b664d9..8662a6b7a30b 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -68,6 +68,7 @@ obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o +CFLAGS_hpwdt.o += -O obj-$(CONFIG_HP_WATCHDOG) += hpwdt.o obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o -- cgit v1.2.3 From 68b80f11380889996aa7eadba29dbbb5c29a5864 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 17 Jun 2008 15:51:47 -0700 Subject: netfilter: nf_nat: fix RCU races Fix three ct_extend/NAT extension related races: - When cleaning up the extension area and removing it from the bysource hash, the nat->ct pointer must not be set to NULL since it may still be used in a RCU read side - When replacing a NAT extension area in the bysource hash, the nat->ct pointer must be assigned before performing the replacement - When reallocating extension storage in ct_extend, the old memory must not be freed immediately since it may still be used by a RCU read side Possibly fixes https://bugzilla.redhat.com/show_bug.cgi?id=449315 and/or http://bugzilla.kernel.org/show_bug.cgi?id=10875 Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/net/netfilter/nf_conntrack_extend.h | 1 + net/ipv4/netfilter/nf_nat_core.c | 3 +-- net/netfilter/nf_conntrack_extend.c | 9 ++++++++- 3 files changed, 10 insertions(+), 3 deletions(-) diff --git a/include/net/netfilter/nf_conntrack_extend.h b/include/net/netfilter/nf_conntrack_extend.h index f736e842977f..f80c0ed6d870 100644 --- a/include/net/netfilter/nf_conntrack_extend.h +++ b/include/net/netfilter/nf_conntrack_extend.h @@ -15,6 +15,7 @@ enum nf_ct_ext_id /* Extensions: optional stuff which isn't permanently in struct. */ struct nf_ct_ext { + struct rcu_head rcu; u8 offset[NF_CT_EXT_NUM]; u8 len; char data[0]; diff --git a/net/ipv4/netfilter/nf_nat_core.c b/net/ipv4/netfilter/nf_nat_core.c index 04578593e100..d2a887fc8d9b 100644 --- a/net/ipv4/netfilter/nf_nat_core.c +++ b/net/ipv4/netfilter/nf_nat_core.c @@ -556,7 +556,6 @@ static void nf_nat_cleanup_conntrack(struct nf_conn *ct) spin_lock_bh(&nf_nat_lock); hlist_del_rcu(&nat->bysource); - nat->ct = NULL; spin_unlock_bh(&nf_nat_lock); } @@ -570,8 +569,8 @@ static void nf_nat_move_storage(void *new, void *old) return; spin_lock_bh(&nf_nat_lock); - hlist_replace_rcu(&old_nat->bysource, &new_nat->bysource); new_nat->ct = ct; + hlist_replace_rcu(&old_nat->bysource, &new_nat->bysource); spin_unlock_bh(&nf_nat_lock); } diff --git a/net/netfilter/nf_conntrack_extend.c b/net/netfilter/nf_conntrack_extend.c index bcc19fa4ed1e..8a3f8b34e466 100644 --- a/net/netfilter/nf_conntrack_extend.c +++ b/net/netfilter/nf_conntrack_extend.c @@ -59,12 +59,19 @@ nf_ct_ext_create(struct nf_ct_ext **ext, enum nf_ct_ext_id id, gfp_t gfp) if (!*ext) return NULL; + INIT_RCU_HEAD(&(*ext)->rcu); (*ext)->offset[id] = off; (*ext)->len = len; return (void *)(*ext) + off; } +static void __nf_ct_ext_free_rcu(struct rcu_head *head) +{ + struct nf_ct_ext *ext = container_of(head, struct nf_ct_ext, rcu); + kfree(ext); +} + void *__nf_ct_ext_add(struct nf_conn *ct, enum nf_ct_ext_id id, gfp_t gfp) { struct nf_ct_ext *new; @@ -106,7 +113,7 @@ void *__nf_ct_ext_add(struct nf_conn *ct, enum nf_ct_ext_id id, gfp_t gfp) (void *)ct->ext + ct->ext->offset[i]); rcu_read_unlock(); } - kfree(ct->ext); + call_rcu(&ct->ext->rcu, __nf_ct_ext_free_rcu); ct->ext = new; } -- cgit v1.2.3 From 8a548868db62422113104ebc658065e3fe976951 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 17 Jun 2008 15:52:07 -0700 Subject: netfilter: nf_conntrack_h323: fix memory leak in module initialization error path Properly free h323_buffer when helper registration fails. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_h323_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/netfilter/nf_conntrack_h323_main.c b/net/netfilter/nf_conntrack_h323_main.c index 95da1a24aab7..99e385d5b707 100644 --- a/net/netfilter/nf_conntrack_h323_main.c +++ b/net/netfilter/nf_conntrack_h323_main.c @@ -1799,6 +1799,7 @@ err3: err2: nf_conntrack_helper_unregister(&nf_conntrack_helper_q931[0]); err1: + kfree(h323_buffer); return ret; } -- cgit v1.2.3 From a56b8f81580761c65e4d8d0c04ac1cb7a788bdf1 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 17 Jun 2008 15:52:32 -0700 Subject: netfilter: nf_conntrack_h323: fix module unload crash The H.245 helper is not registered/unregistered, but assigned to connections manually from the Q.931 helper. This means on unload existing expectations and connections using the helper are not cleaned up, leading to the following oops on module unload: CPU 0 Unable to handle kernel paging request at virtual address c00a6828, epc == 802224dc, ra == 801d4e7c Oops[#1]: Cpu 0 $ 0 : 00000000 00000000 00000004 c00a67f0 $ 4 : 802a5ad0 81657e00 00000000 00000000 $ 8 : 00000008 801461c8 00000000 80570050 $12 : 819b0280 819b04b0 00000006 00000000 $16 : 802a5a60 80000000 80b46000 80321010 $20 : 00000000 00000004 802a5ad0 00000001 $24 : 00000000 802257a8 $28 : 802a4000 802a59e8 00000004 801d4e7c Hi : 0000000b Lo : 00506320 epc : 802224dc ip_conntrack_help+0x38/0x74 Tainted: P ra : 801d4e7c nf_iterate+0xbc/0x130 Status: 1000f403 KERNEL EXL IE Cause : 00800008 BadVA : c00a6828 PrId : 00019374 Modules linked in: ip_nat_pptp ip_conntrack_pptp ath_pktlog wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_xauth ath_pci ath_dev ath_dfs ath_rate_atheros wlan ath_hal ip_nat_tftp ip_conntrack_tftp ip_nat_ftp ip_conntrack_ftp pppoe ppp_async ppp_deflate ppp_mppe pppox ppp_generic slhc Process swapper (pid: 0, threadinfo=802a4000, task=802a6000) Stack : 801e7d98 00000004 802a5a60 80000000 801d4e7c 801d4e7c 802a5ad0 00000004 00000000 00000000 801e7d98 00000000 00000004 802a5ad0 00000000 00000010 801e7d98 80b46000 802a5a60 80320000 80000000 801d4f8c 802a5b00 00000002 80063834 00000000 80b46000 802a5a60 801e7d98 80000000 802ba854 00000000 81a02180 80b7e260 81a021b0 819b0000 819b0000 80570056 00000000 00000001 ... Call Trace: [<801e7d98>] ip_finish_output+0x0/0x23c [<801d4e7c>] nf_iterate+0xbc/0x130 [<801d4e7c>] nf_iterate+0xbc/0x130 [<801e7d98>] ip_finish_output+0x0/0x23c [<801e7d98>] ip_finish_output+0x0/0x23c [<801d4f8c>] nf_hook_slow+0x9c/0x1a4 One way to fix this would be to split helper cleanup from the unregistration function and invoke it for the H.245 helper, but since ctnetlink needs to be able to find the helper for synchonization purposes, a better fix is to register it normally and make sure its not assigned to connections during helper lookup. The missing l3num initialization is enough for this, this patch changes it to use AF_UNSPEC to make it more explicit though. Reported-by: liannan Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_h323_main.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/net/netfilter/nf_conntrack_h323_main.c b/net/netfilter/nf_conntrack_h323_main.c index 99e385d5b707..2f83c158934d 100644 --- a/net/netfilter/nf_conntrack_h323_main.c +++ b/net/netfilter/nf_conntrack_h323_main.c @@ -619,6 +619,7 @@ static const struct nf_conntrack_expect_policy h245_exp_policy = { static struct nf_conntrack_helper nf_conntrack_helper_h245 __read_mostly = { .name = "H.245", .me = THIS_MODULE, + .tuple.src.l3num = AF_UNSPEC, .tuple.dst.protonum = IPPROTO_UDP, .help = h245_help, .expect_policy = &h245_exp_policy, @@ -1765,6 +1766,7 @@ static void __exit nf_conntrack_h323_fini(void) nf_conntrack_helper_unregister(&nf_conntrack_helper_ras[0]); nf_conntrack_helper_unregister(&nf_conntrack_helper_q931[1]); nf_conntrack_helper_unregister(&nf_conntrack_helper_q931[0]); + nf_conntrack_helper_unregister(&nf_conntrack_helper_h245); kfree(h323_buffer); pr_debug("nf_ct_h323: fini\n"); } @@ -1777,27 +1779,32 @@ static int __init nf_conntrack_h323_init(void) h323_buffer = kmalloc(65536, GFP_KERNEL); if (!h323_buffer) return -ENOMEM; - ret = nf_conntrack_helper_register(&nf_conntrack_helper_q931[0]); + ret = nf_conntrack_helper_register(&nf_conntrack_helper_h245); if (ret < 0) goto err1; - ret = nf_conntrack_helper_register(&nf_conntrack_helper_q931[1]); + ret = nf_conntrack_helper_register(&nf_conntrack_helper_q931[0]); if (ret < 0) goto err2; - ret = nf_conntrack_helper_register(&nf_conntrack_helper_ras[0]); + ret = nf_conntrack_helper_register(&nf_conntrack_helper_q931[1]); if (ret < 0) goto err3; - ret = nf_conntrack_helper_register(&nf_conntrack_helper_ras[1]); + ret = nf_conntrack_helper_register(&nf_conntrack_helper_ras[0]); if (ret < 0) goto err4; + ret = nf_conntrack_helper_register(&nf_conntrack_helper_ras[1]); + if (ret < 0) + goto err5; pr_debug("nf_ct_h323: init success\n"); return 0; -err4: +err5: nf_conntrack_helper_unregister(&nf_conntrack_helper_ras[0]); -err3: +err4: nf_conntrack_helper_unregister(&nf_conntrack_helper_q931[1]); -err2: +err3: nf_conntrack_helper_unregister(&nf_conntrack_helper_q931[0]); +err2: + nf_conntrack_helper_unregister(&nf_conntrack_helper_h245); err1: kfree(h323_buffer); return ret; -- cgit v1.2.3 From fe833fca2eac6b3d3ad5e35f44ad4638362f1da8 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Tue, 17 Jun 2008 16:37:13 -0700 Subject: xfrm: fix fragmentation for ipv4 xfrm tunnel When generating the ip header for the transformed packet we just copy the frag_off field of the ip header from the original packet to the ip header of the new generated packet. If we receive a packet as a chain of fragments, all but the last of the new generated packets have the IP_MF flag set. We have to mask the frag_off field to only keep the IP_DF flag from the original packet. This got lost with git commit 36cf9acf93e8561d9faec24849e57688a81eb9c5 ("[IPSEC]: Separate inner/outer mode processing on output") Signed-off-by: Steffen Klassert Acked-by: Herbert Xu Signed-off-by: David S. Miller --- net/ipv4/xfrm4_mode_tunnel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/xfrm4_mode_tunnel.c b/net/ipv4/xfrm4_mode_tunnel.c index 584e6d74e3a9..7135279f3f84 100644 --- a/net/ipv4/xfrm4_mode_tunnel.c +++ b/net/ipv4/xfrm4_mode_tunnel.c @@ -52,7 +52,7 @@ static int xfrm4_mode_tunnel_output(struct xfrm_state *x, struct sk_buff *skb) IP_ECN_clear(top_iph); top_iph->frag_off = (flags & XFRM_STATE_NOPMTUDISC) ? - 0 : XFRM_MODE_SKB_CB(skb)->frag_off; + 0 : (XFRM_MODE_SKB_CB(skb)->frag_off & htons(IP_DF)); ip_select_ident(top_iph, dst->child, NULL); top_iph->ttl = dst_metric(dst->child, RTAX_HOPLIMIT); -- cgit v1.2.3 From 42a886af728c089df8da1b0017b0e7e6c81b5335 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 17 Jun 2008 17:47:50 -0700 Subject: x86-64: Fix "bytes left to copy" return value for copy_from_user() Most users by far do not care about the exact return value (they only really care about whether the copy succeeded in its entirety or not), but a few special core routines actually care deeply about exactly how many bytes were copied from user space. And the unrolled versions of the x86-64 user copy routines would sometimes report that it had copied more bytes than it actually had. Very few uses actually have partial copies to begin with, but to make this bug even harder to trigger, most x86 CPU's use the "rep string" instructions for normal user copies, and that version didn't have this issue. To make it even harder to hit, the one user of this that really cared about the return value (and used the uncached version of the copy that doesn't use the "rep string" instructions) was the generic write routine, which pre-populated its source, once more hiding the problem by avoiding the exception case that triggers the bug. In other words, very special thanks to Bron Gondwana who not only triggered this, but created a test-program to show it, and bisected the behavior down to commit 08291429cfa6258c4cd95d8833beb40f828b194e ("mm: fix pagecache write deadlocks") which changed the access pattern just enough that you can now trigger it with 'writev()' with multiple iovec's. That commit itself was not the cause of the bug, it just allowed all the stars to align just right that you could trigger the problem. [ Side note: this is just the minimal fix to make the copy routines (with __copy_from_user_inatomic_nocache as the particular version that was involved in showing this) have the right return values. We really should improve on the exceptional case further - to make the copy do a byte-accurate copy up to the exact page limit that causes it to fail. As it is, the callers have to do extra work to handle the limit case gracefully. ] Reported-by: Bron Gondwana Cc: Nick Piggin Cc: Andrew Morton Cc: Andi Kleen Cc: Al Viro Signed-off-by: Linus Torvalds (which didn't have this problem), and since most users that do the carethis was very hard to trigger, but --- arch/x86/lib/copy_user_64.S | 25 +++++++++++-------------- arch/x86/lib/copy_user_nocache_64.S | 25 +++++++++++-------------- 2 files changed, 22 insertions(+), 28 deletions(-) diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S index 70bebd310408..ee1c3f635157 100644 --- a/arch/x86/lib/copy_user_64.S +++ b/arch/x86/lib/copy_user_64.S @@ -217,19 +217,19 @@ ENTRY(copy_user_generic_unrolled) /* table sorted by exception address */ .section __ex_table,"a" .align 8 - .quad .Ls1,.Ls1e - .quad .Ls2,.Ls2e - .quad .Ls3,.Ls3e - .quad .Ls4,.Ls4e - .quad .Ld1,.Ls1e + .quad .Ls1,.Ls1e /* Ls1-Ls4 have copied zero bytes */ + .quad .Ls2,.Ls1e + .quad .Ls3,.Ls1e + .quad .Ls4,.Ls1e + .quad .Ld1,.Ls1e /* Ld1-Ld4 have copied 0-24 bytes */ .quad .Ld2,.Ls2e .quad .Ld3,.Ls3e .quad .Ld4,.Ls4e - .quad .Ls5,.Ls5e - .quad .Ls6,.Ls6e - .quad .Ls7,.Ls7e - .quad .Ls8,.Ls8e - .quad .Ld5,.Ls5e + .quad .Ls5,.Ls5e /* Ls5-Ls8 have copied 32 bytes */ + .quad .Ls6,.Ls5e + .quad .Ls7,.Ls5e + .quad .Ls8,.Ls5e + .quad .Ld5,.Ls5e /* Ld5-Ld8 have copied 32-56 bytes */ .quad .Ld6,.Ls6e .quad .Ld7,.Ls7e .quad .Ld8,.Ls8e @@ -244,11 +244,8 @@ ENTRY(copy_user_generic_unrolled) .quad .Le5,.Le_zero .previous - /* compute 64-offset for main loop. 8 bytes accuracy with error on the - pessimistic side. this is gross. it would be better to fix the - interface. */ /* eax: zero, ebx: 64 */ -.Ls1e: addl $8,%eax +.Ls1e: addl $8,%eax /* eax is bytes left uncopied within the loop (Ls1e: 64 .. Ls8e: 8) */ .Ls2e: addl $8,%eax .Ls3e: addl $8,%eax .Ls4e: addl $8,%eax diff --git a/arch/x86/lib/copy_user_nocache_64.S b/arch/x86/lib/copy_user_nocache_64.S index 5196762b3b0e..9d3d1ab83763 100644 --- a/arch/x86/lib/copy_user_nocache_64.S +++ b/arch/x86/lib/copy_user_nocache_64.S @@ -145,19 +145,19 @@ ENTRY(__copy_user_nocache) /* table sorted by exception address */ .section __ex_table,"a" .align 8 - .quad .Ls1,.Ls1e - .quad .Ls2,.Ls2e - .quad .Ls3,.Ls3e - .quad .Ls4,.Ls4e - .quad .Ld1,.Ls1e + .quad .Ls1,.Ls1e /* .Ls[1-4] - 0 bytes copied */ + .quad .Ls2,.Ls1e + .quad .Ls3,.Ls1e + .quad .Ls4,.Ls1e + .quad .Ld1,.Ls1e /* .Ld[1-4] - 0..24 bytes coped */ .quad .Ld2,.Ls2e .quad .Ld3,.Ls3e .quad .Ld4,.Ls4e - .quad .Ls5,.Ls5e - .quad .Ls6,.Ls6e - .quad .Ls7,.Ls7e - .quad .Ls8,.Ls8e - .quad .Ld5,.Ls5e + .quad .Ls5,.Ls5e /* .Ls[5-8] - 32 bytes copied */ + .quad .Ls6,.Ls5e + .quad .Ls7,.Ls5e + .quad .Ls8,.Ls5e + .quad .Ld5,.Ls5e /* .Ld[5-8] - 32..56 bytes copied */ .quad .Ld6,.Ls6e .quad .Ld7,.Ls7e .quad .Ld8,.Ls8e @@ -172,11 +172,8 @@ ENTRY(__copy_user_nocache) .quad .Le5,.Le_zero .previous - /* compute 64-offset for main loop. 8 bytes accuracy with error on the - pessimistic side. this is gross. it would be better to fix the - interface. */ /* eax: zero, ebx: 64 */ -.Ls1e: addl $8,%eax +.Ls1e: addl $8,%eax /* eax: bytes left uncopied: Ls1e: 64 .. Ls8e: 8 */ .Ls2e: addl $8,%eax .Ls3e: addl $8,%eax .Ls4e: addl $8,%eax -- cgit v1.2.3 From cd50e89244087432a70598e432ff199a009b0e73 Mon Sep 17 00:00:00 2001 From: Eduard - Gabriel Munteanu Date: Sun, 15 Jun 2008 18:05:01 +0300 Subject: Unignore vmlinux.lds.h from Git. Added !vmlinux.lds.h to .gitignore because it would otherwise be ignored. Signed-off-by: Eduard - Gabriel Munteanu Acked-by: Mathieu Desnoyers Signed-off-by: Linus Torvalds --- .gitignore | 1 + 1 file changed, 1 insertion(+) diff --git a/.gitignore b/.gitignore index d24ad506e799..9bb1cb6d825d 100644 --- a/.gitignore +++ b/.gitignore @@ -26,6 +26,7 @@ tags TAGS vmlinux* !vmlinux.lds.S +!vmlinux.lds.h System.map Module.markers Module.symvers -- cgit v1.2.3 From f948d56435fc1f7506f08866302ecd6e60b533dd Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 17 Jun 2008 18:05:40 +0200 Subject: fuse: fix thinko in max I/O size calucation Use max not min to enforce a lower limit on the max I/O size. This bug was introduced by "fuse: fix max i/o size calculation" (commit e5d9a0df07484d6d191756878c974e4307fb24ce). Thanks to Brian Wang for noticing. Reported-by: Brian Wang Signed-off-by: Miklos Szeredi Acked-by: Szabolcs Szakacsits Signed-off-by: Linus Torvalds --- fs/fuse/inode.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 43e99513334a..3141690558c8 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -591,7 +591,7 @@ static void process_init_reply(struct fuse_conn *fc, struct fuse_req *req) fc->bdi.ra_pages = min(fc->bdi.ra_pages, ra_pages); fc->minor = arg->minor; fc->max_write = arg->minor < 5 ? 4096 : arg->max_write; - fc->max_write = min_t(unsigned, 4096, fc->max_write); + fc->max_write = max_t(unsigned, 4096, fc->max_write); fc->conn_init = 1; } fuse_put_request(fc, req); @@ -667,7 +667,7 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) fc->flags = d.flags; fc->user_id = d.user_id; fc->group_id = d.group_id; - fc->max_read = min_t(unsigned, 4096, d.max_read); + fc->max_read = max_t(unsigned, 4096, d.max_read); /* Used by get_root_inode() */ sb->s_fs_info = fc; -- cgit v1.2.3 From 8b8091fbf4d8791ad70b146ba2c892c62c2cdc6b Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Tue, 17 Jun 2008 19:27:55 -0400 Subject: ibm_newemac: select CRC32 in Kconfig The ibm_newemac driver requires ether_crc to be defined. Apparently it is possible to generate a .config without CONFIG_CRC32 set which causes the following link errors if IBM_NEW_EMAC is selected: LD .tmp_vmlinux1 drivers/built-in.o: In function `emac_hash_mc': core.c:(.text+0x2f524): undefined reference to `crc32_le' core.c:(.text+0x2f528): undefined reference to `bitrev32' make: *** [.tmp_vmlinux1] Error 1 This patch has IBM_NEW_EMAC select CRC32 so we don't hit this error. Signed-off-by: Josh Boyer Signed-off-by: Jeff Garzik --- drivers/net/ibm_newemac/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ibm_newemac/Kconfig b/drivers/net/ibm_newemac/Kconfig index 0d3e7380bad0..70a3272ee998 100644 --- a/drivers/net/ibm_newemac/Kconfig +++ b/drivers/net/ibm_newemac/Kconfig @@ -1,6 +1,7 @@ config IBM_NEW_EMAC tristate "IBM EMAC Ethernet support" depends on PPC_DCR && PPC_MERGE + select CRC32 help This driver supports the IBM EMAC family of Ethernet controllers typically found on 4xx embedded PowerPC chips, but also on the -- cgit v1.2.3 From dc515f2e0b356981ea0c4581ff0e587aea8b624a Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Sun, 15 Jun 2008 22:59:43 -0700 Subject: netxen: fix portnum for hp mezz cards This fixes a the issue where logical port number is set incorrectly for HP blade mezz cards. Signed-off-by: Dhananjay Phadke Signed-off-by: Jeff Garzik --- drivers/net/netxen/netxen_nic_main.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 7144c255ce54..5a2fd214fefe 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -530,9 +530,15 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) netxen_initialize_adapter_sw(adapter); /* initialize the buffers in adapter */ /* Mezz cards have PCI function 0,2,3 enabled */ - if ((adapter->ahw.boardcfg.board_type == NETXEN_BRDTYPE_P2_SB31_10G_IMEZ) - && (pci_func_id >= 2)) + switch (adapter->ahw.boardcfg.board_type) { + case NETXEN_BRDTYPE_P2_SB31_10G_IMEZ: + case NETXEN_BRDTYPE_P2_SB31_10G_HMEZ: + if (pci_func_id >= 2) adapter->portnum = pci_func_id - 2; + break; + default: + break; + } #ifdef CONFIG_IA64 if(adapter->portnum == 0) { -- cgit v1.2.3 From 3276fbad8385d8e86d85fad4d86dae669a045c65 Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Sun, 15 Jun 2008 22:59:44 -0700 Subject: netxen: remove global physical_port array Store physical port number in netxen_adapter structure. Signed-off-by: Dhananjay Phadke Signed-off-by: Jeff Garzik --- drivers/net/netxen/netxen_nic.h | 2 +- drivers/net/netxen/netxen_nic_ethtool.c | 6 +++--- drivers/net/netxen/netxen_nic_hw.c | 8 ++++---- drivers/net/netxen/netxen_nic_isr.c | 4 ++-- drivers/net/netxen/netxen_nic_main.c | 4 +--- drivers/net/netxen/netxen_nic_niu.c | 22 +++++++++++----------- 6 files changed, 22 insertions(+), 24 deletions(-) diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index 8cb29f5b1038..ec2ed89a0828 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -863,6 +863,7 @@ struct netxen_adapter { unsigned char mac_addr[ETH_ALEN]; int mtu; int portnum; + u8 physical_port; struct work_struct watchdog_task; struct timer_list watchdog_timer; @@ -1169,5 +1170,4 @@ extern int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr, extern struct ethtool_ops netxen_nic_ethtool_ops; -extern int physical_port[]; /* physical port # from virtual port.*/ #endif /* __NETXEN_NIC_H_ */ diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c index 6e98d830eefb..723487bf200c 100644 --- a/drivers/net/netxen/netxen_nic_ethtool.c +++ b/drivers/net/netxen/netxen_nic_ethtool.c @@ -369,7 +369,7 @@ netxen_nic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p) for (i = 3; niu_registers[mode].reg[i - 3] != -1; i++) { /* GB: port specific registers */ if (mode == 0 && i >= 19) - window = physical_port[adapter->portnum] * + window = adapter->physical_port * NETXEN_NIC_PORT_WINDOW; NETXEN_NIC_LOCKED_READ_REG(niu_registers[mode]. @@ -527,7 +527,7 @@ netxen_nic_get_pauseparam(struct net_device *dev, { struct netxen_adapter *adapter = netdev_priv(dev); __u32 val; - int port = physical_port[adapter->portnum]; + int port = adapter->physical_port; if (adapter->ahw.board_type == NETXEN_NIC_GBE) { if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS)) @@ -573,7 +573,7 @@ netxen_nic_set_pauseparam(struct net_device *dev, { struct netxen_adapter *adapter = netdev_priv(dev); __u32 val; - int port = physical_port[adapter->portnum]; + int port = adapter->physical_port; /* read mode */ if (adapter->ahw.board_type == NETXEN_NIC_GBE) { if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS)) diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index af7356468251..30316a847dd8 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -1032,15 +1032,15 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter) int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu) { netxen_nic_write_w0(adapter, - NETXEN_NIU_GB_MAX_FRAME_SIZE( - physical_port[adapter->portnum]), new_mtu); + NETXEN_NIU_GB_MAX_FRAME_SIZE(adapter->physical_port), + new_mtu); return 0; } int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu) { new_mtu += NETXEN_NIU_HDRSIZE + NETXEN_NIU_TLRSIZE; - if (physical_port[adapter->portnum] == 0) + if (adapter->physical_port == 0) netxen_nic_write_w0(adapter, NETXEN_NIU_XGE_MAX_FRAME_SIZE, new_mtu); else @@ -1051,7 +1051,7 @@ int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu) void netxen_nic_init_niu_gb(struct netxen_adapter *adapter) { - netxen_niu_gbe_init_port(adapter, physical_port[adapter->portnum]); + netxen_niu_gbe_init_port(adapter, adapter->physical_port); } void diff --git a/drivers/net/netxen/netxen_nic_isr.c b/drivers/net/netxen/netxen_nic_isr.c index f487615f4063..96cec41f9019 100644 --- a/drivers/net/netxen/netxen_nic_isr.c +++ b/drivers/net/netxen/netxen_nic_isr.c @@ -145,7 +145,7 @@ static void netxen_nic_isr_other(struct netxen_adapter *adapter) /* verify the offset */ val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_XG_STATE)); - val = val >> physical_port[adapter->portnum]; + val = val >> adapter->physical_port; if (val == adapter->ahw.qg_linksup) return; @@ -199,7 +199,7 @@ void netxen_nic_xgbe_handle_phy_intr(struct netxen_adapter *adapter) /* WINDOW = 1 */ val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_XG_STATE)); - val >>= (physical_port[adapter->portnum] * 8); + val >>= (adapter->physical_port * 8); val &= 0xff; if (adapter->ahw.xg_linkup == 1 && val != XG_LINK_UP) { diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 5a2fd214fefe..f903de0fe9ea 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -70,8 +70,6 @@ static void netxen_nic_poll_controller(struct net_device *netdev); static irqreturn_t netxen_intr(int irq, void *data); static irqreturn_t netxen_msi_intr(int irq, void *data); -int physical_port[] = {0, 1, 2, 3}; - /* PCI Device ID Table */ static struct pci_device_id netxen_pci_tbl[] __devinitdata = { {PCI_DEVICE(0x4040, 0x0001)}, @@ -647,7 +645,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) */ i = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_V2P(adapter->portnum))); if (i != 0x55555555) - physical_port[adapter->portnum] = i; + adapter->physical_port = i; netif_carrier_off(netdev); netif_stop_queue(netdev); diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c index 1c852a76c80d..a3bc7cc67a6f 100644 --- a/drivers/net/netxen/netxen_nic_niu.c +++ b/drivers/net/netxen/netxen_nic_niu.c @@ -94,7 +94,7 @@ int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg, long timeout = 0; long result = 0; long restore = 0; - long phy = physical_port[adapter->portnum]; + long phy = adapter->physical_port; __u32 address; __u32 command; __u32 status; @@ -190,7 +190,7 @@ int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long reg, long timeout = 0; long result = 0; long restore = 0; - long phy = physical_port[adapter->portnum]; + long phy = adapter->physical_port; __u32 address; __u32 command; __u32 status; @@ -456,7 +456,7 @@ int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port) int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port) { - u32 portnum = physical_port[adapter->portnum]; + u32 portnum = adapter->physical_port; netxen_crb_writelit_adapter(adapter, NETXEN_NIU_XGE_CONFIG_1+(0x10000*portnum), 0x1447); @@ -573,7 +573,7 @@ static int netxen_niu_macaddr_get(struct netxen_adapter *adapter, { u32 stationhigh; u32 stationlow; - int phy = physical_port[adapter->portnum]; + int phy = adapter->physical_port; u8 val[8]; if (addr == NULL) @@ -604,7 +604,7 @@ int netxen_niu_macaddr_set(struct netxen_adapter *adapter, { u8 temp[4]; u32 val; - int phy = physical_port[adapter->portnum]; + int phy = adapter->physical_port; unsigned char mac_addr[6]; int i; DECLARE_MAC_BUF(mac); @@ -724,7 +724,7 @@ int netxen_niu_enable_gbe_port(struct netxen_adapter *adapter, int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter) { __u32 mac_cfg0; - u32 port = physical_port[adapter->portnum]; + u32 port = adapter->physical_port; if (port > NETXEN_NIU_MAX_GBE_PORTS) return -EINVAL; @@ -740,7 +740,7 @@ int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter) int netxen_niu_disable_xg_port(struct netxen_adapter *adapter) { __u32 mac_cfg; - u32 port = physical_port[adapter->portnum]; + u32 port = adapter->physical_port; if (port > NETXEN_NIU_MAX_XG_PORTS) return -EINVAL; @@ -757,7 +757,7 @@ int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter, netxen_niu_prom_mode_t mode) { __u32 reg; - u32 port = physical_port[adapter->portnum]; + u32 port = adapter->physical_port; if (port > NETXEN_NIU_MAX_GBE_PORTS) return -EINVAL; @@ -814,7 +814,7 @@ int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter, int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter, netxen_ethernet_macaddr_t addr) { - int phy = physical_port[adapter->portnum]; + int phy = adapter->physical_port; u8 temp[4]; u32 val; @@ -867,7 +867,7 @@ int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter, int netxen_niu_xg_macaddr_get(struct netxen_adapter *adapter, netxen_ethernet_macaddr_t * addr) { - int phy = physical_port[adapter->portnum]; + int phy = adapter->physical_port; u32 stationhigh; u32 stationlow; u8 val[8]; @@ -896,7 +896,7 @@ int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter, netxen_niu_prom_mode_t mode) { __u32 reg; - u32 port = physical_port[adapter->portnum]; + u32 port = adapter->physical_port; if (port > NETXEN_NIU_MAX_XG_PORTS) return -EINVAL; -- cgit v1.2.3 From dcd56fdbaeae1008044687b973c4a3e852e8a726 Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Sun, 15 Jun 2008 22:59:45 -0700 Subject: netxen: cleanup debug messages o Remove unnecessary debug prints and functions. o Explicitly specify pci class (0x020000) to avoid enabling management function. Signed-off-by: Dhananjay Phadke Signed-off-by: Jeff Garzik --- drivers/net/netxen/netxen_nic.h | 16 ------ drivers/net/netxen/netxen_nic_hw.c | 104 +++++++++++++++-------------------- drivers/net/netxen/netxen_nic_init.c | 22 +------- drivers/net/netxen/netxen_nic_main.c | 60 +++++++++----------- 4 files changed, 70 insertions(+), 132 deletions(-) diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index ec2ed89a0828..da4c4fb97064 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -776,7 +776,6 @@ struct netxen_hardware_context { u8 revision_id; u16 board_type; - u16 max_ports; struct netxen_board_info boardcfg; u32 xg_linkup; u32 qg_linksup; @@ -1035,7 +1034,6 @@ int netxen_rom_se(struct netxen_adapter *adapter, int addr); /* Functions from netxen_nic_isr.c */ void netxen_initialize_adapter_sw(struct netxen_adapter *adapter); -void netxen_initialize_adapter_hw(struct netxen_adapter *adapter); void *netxen_alloc(struct pci_dev *pdev, size_t sz, dma_addr_t * ptr, struct pci_dev **used_dev); void netxen_initialize_adapter_ops(struct netxen_adapter *adapter); @@ -1078,20 +1076,6 @@ static const struct netxen_brdinfo netxen_boards[] = { #define NUM_SUPPORTED_BOARDS ARRAY_SIZE(netxen_boards) -static inline void get_brd_port_by_type(u32 type, int *ports) -{ - int i, found = 0; - for (i = 0; i < NUM_SUPPORTED_BOARDS; ++i) { - if (netxen_boards[i].brdtype == type) { - *ports = netxen_boards[i].ports; - found = 1; - break; - } - } - if (!found) - *ports = 0; -} - static inline void get_brd_name_by_type(u32 type, char *name) { int i, found = 0; diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index 30316a847dd8..c43d06b8de9b 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -396,11 +396,8 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter) } adapter->intr_scheme = readl( NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_CAPABILITIES_FW)); - printk(KERN_NOTICE "%s: FW capabilities:0x%x\n", netxen_nic_driver_name, - adapter->intr_scheme); adapter->msi_mode = readl( NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_MSI_MODE_FW)); - DPRINTK(INFO, "Receive Peg ready too. starting stuff\n"); addr = netxen_alloc(adapter->ahw.pdev, sizeof(struct netxen_ring_ctx) + @@ -408,8 +405,6 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter) (dma_addr_t *) & adapter->ctx_desc_phys_addr, &adapter->ctx_desc_pdev); - printk(KERN_INFO "ctx_desc_phys_addr: 0x%llx\n", - (unsigned long long) adapter->ctx_desc_phys_addr); if (addr == NULL) { DPRINTK(ERR, "bad return from pci_alloc_consistent\n"); err = -ENOMEM; @@ -429,8 +424,6 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter) adapter->max_tx_desc_count, (dma_addr_t *) & hw->cmd_desc_phys_addr, &adapter->ahw.cmd_desc_pdev); - printk(KERN_INFO "cmd_desc_phys_addr: 0x%llx\n", - (unsigned long long) hw->cmd_desc_phys_addr); if (addr == NULL) { DPRINTK(ERR, "bad return from pci_alloc_consistent\n"); @@ -1127,7 +1120,6 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter) void netxen_nic_flash_print(struct netxen_adapter *adapter) { - int valid = 1; u32 fw_major = 0; u32 fw_minor = 0; u32 fw_build = 0; @@ -1137,70 +1129,62 @@ void netxen_nic_flash_print(struct netxen_adapter *adapter) __le32 *ptr32; struct netxen_board_info *board_info = &(adapter->ahw.boardcfg); - if (board_info->magic != NETXEN_BDINFO_MAGIC) { - printk - ("NetXen Unknown board config, Read 0x%x expected as 0x%x\n", - board_info->magic, NETXEN_BDINFO_MAGIC); - valid = 0; - } - if (board_info->header_version != NETXEN_BDINFO_VERSION) { - printk("NetXen Unknown board config version." - " Read %x, expected %x\n", - board_info->header_version, NETXEN_BDINFO_VERSION); - valid = 0; - } - if (valid) { - ptr32 = (u32 *)&serial_num; - addr = NETXEN_USER_START + - offsetof(struct netxen_new_user_info, serial_num); - for (i = 0; i < 8; i++) { - if (netxen_rom_fast_read(adapter, addr, ptr32) == -1) { - printk("%s: ERROR reading %s board userarea.\n", - netxen_nic_driver_name, - netxen_nic_driver_name); - return; - } - ptr32++; - addr += sizeof(u32); + + adapter->driver_mismatch = 0; + + ptr32 = (u32 *)&serial_num; + addr = NETXEN_USER_START + + offsetof(struct netxen_new_user_info, serial_num); + for (i = 0; i < 8; i++) { + if (netxen_rom_fast_read(adapter, addr, ptr32) == -1) { + printk("%s: ERROR reading %s board userarea.\n", + netxen_nic_driver_name, + netxen_nic_driver_name); + adapter->driver_mismatch = 1; + return; } + ptr32++; + addr += sizeof(u32); + } + + fw_major = readl(NETXEN_CRB_NORMALIZE(adapter, + NETXEN_FW_VERSION_MAJOR)); + fw_minor = readl(NETXEN_CRB_NORMALIZE(adapter, + NETXEN_FW_VERSION_MINOR)); + fw_build = + readl(NETXEN_CRB_NORMALIZE(adapter, NETXEN_FW_VERSION_SUB)); + if (adapter->portnum == 0) { get_brd_name_by_type(board_info->board_type, brd_name); printk("NetXen %s Board S/N %s Chip id 0x%x\n", - brd_name, serial_num, board_info->chip_id); - - printk("NetXen %s Board #%d, Chip id 0x%x\n", - board_info->board_type == 0x0b ? "XGB" : "GBE", - board_info->board_num, board_info->chip_id); - fw_major = readl(NETXEN_CRB_NORMALIZE(adapter, - NETXEN_FW_VERSION_MAJOR)); - fw_minor = readl(NETXEN_CRB_NORMALIZE(adapter, - NETXEN_FW_VERSION_MINOR)); - fw_build = - readl(NETXEN_CRB_NORMALIZE(adapter, NETXEN_FW_VERSION_SUB)); - - printk("NetXen Firmware version %d.%d.%d\n", fw_major, fw_minor, - fw_build); + brd_name, serial_num, board_info->chip_id); + printk("NetXen Firmware version %d.%d.%d\n", fw_major, + fw_minor, fw_build); } + if (fw_major != _NETXEN_NIC_LINUX_MAJOR) { - printk(KERN_ERR "The mismatch in driver version and firmware " - "version major number\n" - "Driver version major number = %d \t" - "Firmware version major number = %d \n", - _NETXEN_NIC_LINUX_MAJOR, fw_major); adapter->driver_mismatch = 1; } if (fw_minor != _NETXEN_NIC_LINUX_MINOR && fw_minor != (_NETXEN_NIC_LINUX_MINOR + 1)) { - printk(KERN_ERR "The mismatch in driver version and firmware " - "version minor number\n" - "Driver version minor number = %d \t" - "Firmware version minor number = %d \n", - _NETXEN_NIC_LINUX_MINOR, fw_minor); adapter->driver_mismatch = 1; } - if (adapter->driver_mismatch) - printk(KERN_INFO "Use the driver with version no %d.%d.xxx\n", - fw_major, fw_minor); + if (adapter->driver_mismatch) { + printk(KERN_ERR "%s: driver and firmware version mismatch\n", + adapter->netdev->name); + return; + } + + switch (adapter->ahw.board_type) { + case NETXEN_NIC_GBE: + dev_info(&adapter->pdev->dev, "%s: GbE port initialized\n", + adapter->netdev->name); + break; + case NETXEN_NIC_XGBE: + dev_info(&adapter->pdev->dev, "%s: XGbE port initialized\n", + adapter->netdev->name); + break; + } } diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index 45fa33e0cb90..f6aeccfa2831 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -203,21 +203,6 @@ void netxen_initialize_adapter_sw(struct netxen_adapter *adapter) } } -void netxen_initialize_adapter_hw(struct netxen_adapter *adapter) -{ - int ports = 0; - struct netxen_board_info *board_info = &(adapter->ahw.boardcfg); - - if (netxen_nic_get_board_info(adapter) != 0) - printk("%s: Error getting board config info.\n", - netxen_nic_driver_name); - get_brd_port_by_type(board_info->board_type, &ports); - if (ports == 0) - printk(KERN_ERR "%s: Unknown board type\n", - netxen_nic_driver_name); - adapter->ahw.max_ports = ports; -} - void netxen_initialize_adapter_ops(struct netxen_adapter *adapter) { switch (adapter->ahw.board_type) { @@ -765,18 +750,13 @@ int netxen_flash_unlock(struct netxen_adapter *adapter) int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) { - int addr, val, status; + int addr, val; int n, i; int init_delay = 0; struct crb_addr_pair *buf; u32 off; /* resetall */ - status = netxen_nic_get_board_info(adapter); - if (status) - printk("%s: netxen_pinit_from_rom: Error getting board info\n", - netxen_nic_driver_name); - netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET, NETXEN_ROMBUS_RESET); diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index f903de0fe9ea..755f4abe2f55 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -72,13 +72,13 @@ static irqreturn_t netxen_msi_intr(int irq, void *data); /* PCI Device ID Table */ static struct pci_device_id netxen_pci_tbl[] __devinitdata = { - {PCI_DEVICE(0x4040, 0x0001)}, - {PCI_DEVICE(0x4040, 0x0002)}, - {PCI_DEVICE(0x4040, 0x0003)}, - {PCI_DEVICE(0x4040, 0x0004)}, - {PCI_DEVICE(0x4040, 0x0005)}, - {PCI_DEVICE(0x4040, 0x0024)}, - {PCI_DEVICE(0x4040, 0x0025)}, + {PCI_DEVICE(0x4040, 0x0001), PCI_DEVICE_CLASS(0x020000, ~0)}, + {PCI_DEVICE(0x4040, 0x0002), PCI_DEVICE_CLASS(0x020000, ~0)}, + {PCI_DEVICE(0x4040, 0x0003), PCI_DEVICE_CLASS(0x020000, ~0)}, + {PCI_DEVICE(0x4040, 0x0004), PCI_DEVICE_CLASS(0x020000, ~0)}, + {PCI_DEVICE(0x4040, 0x0005), PCI_DEVICE_CLASS(0x020000, ~0)}, + {PCI_DEVICE(0x4040, 0x0024), PCI_DEVICE_CLASS(0x020000, ~0)}, + {PCI_DEVICE(0x4040, 0x0025), PCI_DEVICE_CLASS(0x020000, ~0)}, {0,} }; @@ -286,10 +286,11 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) int pci_func_id = PCI_FUNC(pdev->devfn); DECLARE_MAC_BUF(mac); - printk(KERN_INFO "%s \n", netxen_nic_driver_string); + if (pci_func_id == 0) + printk(KERN_INFO "%s \n", netxen_nic_driver_string); if (pdev->class != 0x020000) { - printk(KERN_ERR"NetXen function %d, class %x will not " + printk(KERN_DEBUG "NetXen function %d, class %x will not " "be enabled.\n",pci_func_id, pdev->class); return -ENODEV; } @@ -448,8 +449,12 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) */ adapter->curr_window = 255; - /* initialize the adapter */ - netxen_initialize_adapter_hw(adapter); + if (netxen_nic_get_board_info(adapter) != 0) { + printk("%s: Error getting board config info.\n", + netxen_nic_driver_name); + err = -EIO; + goto err_out_iounmap; + } /* * Adapter in our case is quad port so initialize it before @@ -621,7 +626,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* clear the register for future unloads/loads */ writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc))); - printk(KERN_INFO "State: 0x%0x\n", + printk(KERN_DEBUG "State: 0x%0x\n", readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE))); /* @@ -643,6 +648,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* * See if the firmware gave us a virtual-physical port mapping. */ + adapter->physical_port = adapter->portnum; i = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_V2P(adapter->portnum))); if (i != 0x55555555) adapter->physical_port = i; @@ -658,22 +664,9 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_free_dev; } + netxen_nic_flash_print(adapter); pci_set_drvdata(pdev, adapter); - switch (adapter->ahw.board_type) { - case NETXEN_NIC_GBE: - printk(KERN_INFO "%s: QUAD GbE board initialized\n", - netxen_nic_driver_name); - break; - - case NETXEN_NIC_XGBE: - printk(KERN_INFO "%s: XGbE board initialized\n", - netxen_nic_driver_name); - break; - } - - adapter->driver_mismatch = 0; - return 0; err_out_free_dev: @@ -781,9 +774,6 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev) /* clear the register for future unloads/loads */ writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc))); - printk(KERN_INFO "State: 0x%0x\n", - readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE))); - /* leave the hw in the same state as reboot */ writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)); netxen_pinit_from_rom(adapter, 0); @@ -794,7 +784,7 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev) /* clear the register for future unloads/loads */ writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc))); - printk(KERN_INFO "State: 0x%0x\n", + printk(KERN_DEBUG "State: 0x%0x\n", readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE))); i = 100; @@ -844,13 +834,15 @@ static int netxen_nic_open(struct net_device *netdev) irq_handler_t handler; unsigned long flags = IRQF_SAMPLE_RANDOM; + if (adapter->driver_mismatch) + return -EIO; + if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC) { err = netxen_init_firmware(adapter); if (err != 0) { printk(KERN_ERR "Failed to init firmware\n"); return -EIO; } - netxen_nic_flash_print(adapter); /* setup all the resources for the Phantom... */ /* this include the descriptors for rcv, tx, and status */ @@ -899,14 +891,12 @@ static int netxen_nic_open(struct net_device *netdev) if (adapter->set_mtu) adapter->set_mtu(adapter, netdev->mtu); - if (!adapter->driver_mismatch) - mod_timer(&adapter->watchdog_timer, jiffies); + mod_timer(&adapter->watchdog_timer, jiffies); napi_enable(&adapter->napi); netxen_nic_enable_int(adapter); - if (!adapter->driver_mismatch) - netif_start_queue(netdev); + netif_start_queue(netdev); return 0; } -- cgit v1.2.3 From 439b454edf551f5a6eb49de6b868015724d275ab Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Sun, 15 Jun 2008 22:59:46 -0700 Subject: netxen: download firmware in pci probe Downloading firmware in pci probe allows recovery in case of firmware failure by reloading the driver. Also reduced delays in firmware load. Signed-off-by: Dhananjay Phadke Signed-off-by: Jeff Garzik --- drivers/net/netxen/netxen_nic_init.c | 24 ++++++++++--- drivers/net/netxen/netxen_nic_main.c | 65 ++++++------------------------------ 2 files changed, 30 insertions(+), 59 deletions(-) diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index f6aeccfa2831..70d1b22ced22 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -840,10 +840,10 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) netxen_nic_pci_change_crbwindow(adapter, 1); } if (init_delay == 1) { - msleep(2000); + msleep(1000); init_delay = 0; } - msleep(20); + msleep(1); } kfree(buf); @@ -918,12 +918,28 @@ int netxen_initialize_adapter_offload(struct netxen_adapter *adapter) void netxen_free_adapter_offload(struct netxen_adapter *adapter) { + int i; + if (adapter->dummy_dma.addr) { - pci_free_consistent(adapter->ahw.pdev, + i = 100; + do { + if (dma_watchdog_shutdown_request(adapter) == 1) + break; + msleep(50); + if (dma_watchdog_shutdown_poll_result(adapter) == 1) + break; + } while (--i); + + if (i) { + pci_free_consistent(adapter->ahw.pdev, NETXEN_HOST_DUMMY_DMA_SIZE, adapter->dummy_dma.addr, adapter->dummy_dma.phys_addr); - adapter->dummy_dma.addr = NULL; + adapter->dummy_dma.addr = NULL; + } else { + printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n", + adapter->netdev->name); + } } } diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 755f4abe2f55..6797ed069f1f 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -543,14 +543,6 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) break; } -#ifdef CONFIG_IA64 - if(adapter->portnum == 0) { - netxen_pinit_from_rom(adapter, 0); - udelay(500); - netxen_load_firmware(adapter); - } -#endif - init_timer(&adapter->watchdog_timer); adapter->ahw.xg_linkup = 0; adapter->watchdog_timer.function = &netxen_watchdog; @@ -622,11 +614,18 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err = -ENODEV; goto err_out_free_dev; } + } else { + writel(0, NETXEN_CRB_NORMALIZE(adapter, + CRB_CMDPEG_STATE)); + netxen_pinit_from_rom(adapter, 0); + msleep(1); + netxen_load_firmware(adapter); + netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE); } /* clear the register for future unloads/loads */ writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc))); - printk(KERN_DEBUG "State: 0x%0x\n", + dev_info(&pdev->dev, "cmdpeg state: 0x%0x\n", readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE))); /* @@ -757,52 +756,8 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev) vfree(adapter->cmd_buf_arr); - if (adapter->portnum == 0) { - if (init_firmware_done) { - i = 100; - do { - if (dma_watchdog_shutdown_request(adapter) == 1) - break; - msleep(100); - if (dma_watchdog_shutdown_poll_result(adapter) == 1) - break; - } while (--i); - - if (i == 0) - printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n", - netdev->name); - - /* clear the register for future unloads/loads */ - writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc))); - /* leave the hw in the same state as reboot */ - writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)); - netxen_pinit_from_rom(adapter, 0); - msleep(1); - netxen_load_firmware(adapter); - netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE); - } - - /* clear the register for future unloads/loads */ - writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc))); - printk(KERN_DEBUG "State: 0x%0x\n", - readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE))); - - i = 100; - do { - if (dma_watchdog_shutdown_request(adapter) == 1) - break; - msleep(100); - if (dma_watchdog_shutdown_poll_result(adapter) == 1) - break; - } while (--i); - - if (i) { - netxen_free_adapter_offload(adapter); - } else { - printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n", - netdev->name); - } - } + if (adapter->portnum == 0) + netxen_free_adapter_offload(adapter); if (adapter->irq) free_irq(adapter->irq, adapter); -- cgit v1.2.3 From a3b4fcedee5cf1d1342b85f1318c0fe1ff1727a9 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Sat, 14 Jun 2008 10:32:15 -0700 Subject: sky2: 88E8040T pci device id Missed one pci id for 88E8040T. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 62436b3a18c6..c8a5ef2d75f4 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -118,6 +118,7 @@ static const struct pci_device_id sky2_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4355) }, /* 88E8040T */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4357) }, /* 88E8042 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */ -- cgit v1.2.3 From 6fd65882f5e99972ba96f7cc92086ebac041cdf8 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 12 Jun 2008 21:36:24 -0700 Subject: net/enc28j60: section fix Minor bugfixes to the enc28j60 driver ... wrong section marking, indentation, and bogus use of spi_bus_type. Signed-off-by: David Brownell Acked-by: Claudio Lanconelli Signed-off-by: Jeff Garzik --- drivers/net/enc28j60.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index 46a90e9ec563..0f1581cbd101 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -1556,7 +1556,7 @@ error_alloc: return ret; } -static int enc28j60_remove(struct spi_device *spi) +static int __devexit enc28j60_remove(struct spi_device *spi) { struct enc28j60_net *priv = dev_get_drvdata(&spi->dev); @@ -1573,9 +1573,8 @@ static int enc28j60_remove(struct spi_device *spi) static struct spi_driver enc28j60_driver = { .driver = { .name = DRV_NAME, - .bus = &spi_bus_type, .owner = THIS_MODULE, - }, + }, .probe = enc28j60_probe, .remove = __devexit_p(enc28j60_remove), }; -- cgit v1.2.3 From 7dac6f8df607929e51f4fd598d80bd009c45a9f8 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 12 Jun 2008 21:38:06 -0700 Subject: net/enc28j60: low power mode Keep enc28j60 chips in low-power mode when they're not in use. At typically 120 mA, these chips run hot even when idle; this low power mode cuts that power usage by a factor of around 100. This version provides a generic routine to poll a register until its masked value equals some value ... e.g. bit set or cleared. It's basically what the previous wait_phy_ready() did, but this version is generalized to support the handshaking needed to enter and exit low power mode. Signed-off-by: David Brownell Signed-off-by: Claudio Lanconelli Signed-off-by: Jeff Garzik --- drivers/net/enc28j60.c | 82 +++++++++++++++++++++++++++++++++++--------------- 1 file changed, 58 insertions(+), 24 deletions(-) diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index 0f1581cbd101..c05cb159c772 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -400,26 +400,31 @@ enc28j60_packet_write(struct enc28j60_net *priv, int len, const u8 *data) mutex_unlock(&priv->lock); } -/* - * Wait until the PHY operation is complete. - */ -static int wait_phy_ready(struct enc28j60_net *priv) +static unsigned long msec20_to_jiffies; + +static int poll_ready(struct enc28j60_net *priv, u8 reg, u8 mask, u8 val) { - unsigned long timeout = jiffies + 20 * HZ / 1000; - int ret = 1; + unsigned long timeout = jiffies + msec20_to_jiffies; /* 20 msec timeout read */ - while (nolock_regb_read(priv, MISTAT) & MISTAT_BUSY) { + while ((nolock_regb_read(priv, reg) & mask) != val) { if (time_after(jiffies, timeout)) { if (netif_msg_drv(priv)) - printk(KERN_DEBUG DRV_NAME - ": PHY ready timeout!\n"); - ret = 0; - break; + dev_dbg(&priv->spi->dev, + "reg %02x ready timeout!\n", reg); + return -ETIMEDOUT; } cpu_relax(); } - return ret; + return 0; +} + +/* + * Wait until the PHY operation is complete. + */ +static int wait_phy_ready(struct enc28j60_net *priv) +{ + return poll_ready(priv, MISTAT, MISTAT_BUSY, 0) ? 0 : 1; } /* @@ -594,6 +599,32 @@ static void nolock_txfifo_init(struct enc28j60_net *priv, u16 start, u16 end) nolock_regw_write(priv, ETXNDL, end); } +/* + * Low power mode shrinks power consumption about 100x, so we'd like + * the chip to be in that mode whenever it's inactive. (However, we + * can't stay in lowpower mode during suspend with WOL active.) + */ +static void enc28j60_lowpower(struct enc28j60_net *priv, bool is_low) +{ + if (netif_msg_drv(priv)) + dev_dbg(&priv->spi->dev, "%s power...\n", + is_low ? "low" : "high"); + + mutex_lock(&priv->lock); + if (is_low) { + nolock_reg_bfclr(priv, ECON1, ECON1_RXEN); + poll_ready(priv, ESTAT, ESTAT_RXBUSY, 0); + poll_ready(priv, ECON1, ECON1_TXRTS, 0); + /* ECON2_VRPS was set during initialization */ + nolock_reg_bfset(priv, ECON2, ECON2_PWRSV); + } else { + nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV); + poll_ready(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY); + /* caller sets ECON1_RXEN */ + } + mutex_unlock(&priv->lock); +} + static int enc28j60_hw_init(struct enc28j60_net *priv) { u8 reg; @@ -612,8 +643,8 @@ static int enc28j60_hw_init(struct enc28j60_net *priv) priv->tx_retry_count = 0; priv->max_pk_counter = 0; priv->rxfilter = RXFILTER_NORMAL; - /* enable address auto increment */ - nolock_regb_write(priv, ECON2, ECON2_AUTOINC); + /* enable address auto increment and voltage regulator powersave */ + nolock_regb_write(priv, ECON2, ECON2_AUTOINC | ECON2_VRPS); nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT); nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT); @@ -690,7 +721,7 @@ static int enc28j60_hw_init(struct enc28j60_net *priv) static void enc28j60_hw_enable(struct enc28j60_net *priv) { - /* enable interrutps */ + /* enable interrupts */ if (netif_msg_hw(priv)) printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n", __FUNCTION__); @@ -726,15 +757,12 @@ enc28j60_setlink(struct net_device *ndev, u8 autoneg, u16 speed, u8 duplex) int ret = 0; if (!priv->hw_enable) { - if (autoneg == AUTONEG_DISABLE && speed == SPEED_10) { + /* link is in low power mode now; duplex setting + * will take effect on next enc28j60_hw_init(). + */ + if (autoneg == AUTONEG_DISABLE && speed == SPEED_10) priv->full_duplex = (duplex == DUPLEX_FULL); - if (!enc28j60_hw_init(priv)) { - if (netif_msg_drv(priv)) - dev_err(&ndev->dev, - "hw_reset() failed\n"); - ret = -EINVAL; - } - } else { + else { if (netif_msg_link(priv)) dev_warn(&ndev->dev, "unsupported link setting\n"); @@ -1307,7 +1335,8 @@ static int enc28j60_net_open(struct net_device *dev) } return -EADDRNOTAVAIL; } - /* Reset the hardware here */ + /* Reset the hardware here (and take it out of low power mode) */ + enc28j60_lowpower(priv, false); enc28j60_hw_disable(priv); if (!enc28j60_hw_init(priv)) { if (netif_msg_ifup(priv)) @@ -1337,6 +1366,7 @@ static int enc28j60_net_close(struct net_device *dev) printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__); enc28j60_hw_disable(priv); + enc28j60_lowpower(priv, true); netif_stop_queue(dev); return 0; @@ -1537,6 +1567,8 @@ static int __devinit enc28j60_probe(struct spi_device *spi) dev->watchdog_timeo = TX_TIMEOUT; SET_ETHTOOL_OPS(dev, &enc28j60_ethtool_ops); + enc28j60_lowpower(priv, true); + ret = register_netdev(dev); if (ret) { if (netif_msg_probe(priv)) @@ -1581,6 +1613,8 @@ static struct spi_driver enc28j60_driver = { static int __init enc28j60_init(void) { + msec20_to_jiffies = msecs_to_jiffies(20); + return spi_register_driver(&enc28j60_driver); } -- cgit v1.2.3 From 58c7821c4264a7ddd6f0c31c5caaf393b3897f10 Mon Sep 17 00:00:00 2001 From: Radu Cristescu Date: Thu, 12 Jun 2008 17:04:54 -0500 Subject: atl1: relax eeprom mac address error check The atl1 driver tries to determine the MAC address thusly: - If an EEPROM exists, read the MAC address from EEPROM and validate it. - If an EEPROM doesn't exist, try to read a MAC address from SPI flash. - If that fails, try to read a MAC address directly from the MAC Station Address register. - If that fails, assign a random MAC address provided by the kernel. We now have a report of a system fitted with an EEPROM containing all zeros where we expect the MAC address to be, and we currently handle this as an error condition. Turns out, on this system the BIOS writes a valid MAC address to the NIC's MAC Station Address register, but we never try to read it because we return an error when we find the all- zeros address in EEPROM. This patch relaxes the error check and continues looking for a MAC address even if it finds an illegal one in EEPROM. Signed-off-by: Radu Cristescu Signed-off-by: Jay Cliburn Signed-off-by: Jeff Garzik --- drivers/net/atlx/atl1.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 99e0b4cdc56f..3c798ae5c343 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -471,7 +471,6 @@ static int atl1_get_permanent_address(struct atl1_hw *hw) memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); return 0; } - return 1; } /* see if SPI FLAGS exist ? */ -- cgit v1.2.3 From f09f7ee20c867818bacf79426cf491b2749e7eff Mon Sep 17 00:00:00 2001 From: Ang Way Chuang Date: Tue, 17 Jun 2008 21:10:33 -0700 Subject: tun: Proper handling of IPv6 header in tun driver when TUN_NO_PI is set By default, tun.c running in TUN_TUN_DEV mode will set the protocol of packet to IPv4 if TUN_NO_PI is set. My program failed to work when I assumed that the driver will check the first nibble of packet, determine IP version and set the appropriate protocol. Signed-off-by: Ang Way Chuang Acked-by: Max Krasnyansky Signed-off-by: David S. Miller --- drivers/net/tun.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 0ce07a339c7e..7ab94c825b57 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -313,6 +313,21 @@ static __inline__ ssize_t tun_get_user(struct tun_struct *tun, struct iovec *iv, switch (tun->flags & TUN_TYPE_MASK) { case TUN_TUN_DEV: + if (tun->flags & TUN_NO_PI) { + switch (skb->data[0] & 0xf0) { + case 0x40: + pi.proto = htons(ETH_P_IP); + break; + case 0x60: + pi.proto = htons(ETH_P_IPV6); + break; + default: + tun->dev->stats.rx_dropped++; + kfree_skb(skb); + return -EINVAL; + } + } + skb_reset_mac_header(skb); skb->protocol = pi.proto; skb->dev = tun->dev; -- cgit v1.2.3 From 3c73419c09a5ef73d56472dbfdade9e311496e9b Mon Sep 17 00:00:00 2001 From: Rainer Weikusat Date: Tue, 17 Jun 2008 22:28:05 -0700 Subject: af_unix: fix 'poll for write'/ connected DGRAM sockets The unix_dgram_sendmsg routine implements a (somewhat crude) form of receiver-imposed flow control by comparing the length of the receive queue of the 'peer socket' with the max_ack_backlog value stored in the corresponding sock structure, either blocking the thread which caused the send-routine to be called or returning EAGAIN. This routine is used by both SOCK_DGRAM and SOCK_SEQPACKET sockets. The poll-implementation for these socket types is datagram_poll from core/datagram.c. A socket is deemed to be writeable by this routine when the memory presently consumed by datagrams owned by it is less than the configured socket send buffer size. This is always wrong for connected PF_UNIX non-stream sockets when the abovementioned receive queue is currently considered to be full. 'poll' will then return, indicating that the socket is writeable, but a subsequent write result in EAGAIN, effectively causing an (usual) application to 'poll for writeability by repeated send request with O_NONBLOCK set' until it has consumed its time quantum. The change below uses a suitably modified variant of the datagram_poll routines for both type of PF_UNIX sockets, which tests if the recv-queue of the peer a socket is connected to is presently considered to be 'full' as part of the 'is this socket writeable'-checking code. The socket being polled is additionally put onto the peer_wait wait queue associated with its peer, because the unix_dgram_sendmsg routine does a wake up on this queue after a datagram was received and the 'other wakeup call' is done implicitly as part of skb destruction, meaning, a process blocked in poll because of a full peer receive queue could otherwise sleep forever if no datagram owned by its socket was already sitting on this queue. Among this change is a small (inline) helper routine named 'unix_recvq_full', which consolidates the actual testing code (in three different places) into a single location. Signed-off-by: Rainer Weikusat Signed-off-by: David S. Miller --- net/unix/af_unix.c | 79 +++++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 70 insertions(+), 9 deletions(-) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index e18cd3628db4..657835f227d3 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -169,6 +169,11 @@ static inline int unix_may_send(struct sock *sk, struct sock *osk) return (unix_peer(osk) == NULL || unix_our_peer(sk, osk)); } +static inline int unix_recvq_full(struct sock const *sk) +{ + return skb_queue_len(&sk->sk_receive_queue) > sk->sk_max_ack_backlog; +} + static struct sock *unix_peer_get(struct sock *s) { struct sock *peer; @@ -482,6 +487,8 @@ static int unix_socketpair(struct socket *, struct socket *); static int unix_accept(struct socket *, struct socket *, int); static int unix_getname(struct socket *, struct sockaddr *, int *, int); static unsigned int unix_poll(struct file *, struct socket *, poll_table *); +static unsigned int unix_datagram_poll(struct file *, struct socket *, + poll_table *); static int unix_ioctl(struct socket *, unsigned int, unsigned long); static int unix_shutdown(struct socket *, int); static int unix_stream_sendmsg(struct kiocb *, struct socket *, @@ -527,7 +534,7 @@ static const struct proto_ops unix_dgram_ops = { .socketpair = unix_socketpair, .accept = sock_no_accept, .getname = unix_getname, - .poll = datagram_poll, + .poll = unix_datagram_poll, .ioctl = unix_ioctl, .listen = sock_no_listen, .shutdown = unix_shutdown, @@ -548,7 +555,7 @@ static const struct proto_ops unix_seqpacket_ops = { .socketpair = unix_socketpair, .accept = unix_accept, .getname = unix_getname, - .poll = datagram_poll, + .poll = unix_datagram_poll, .ioctl = unix_ioctl, .listen = unix_listen, .shutdown = unix_shutdown, @@ -983,8 +990,7 @@ static long unix_wait_for_peer(struct sock *other, long timeo) sched = !sock_flag(other, SOCK_DEAD) && !(other->sk_shutdown & RCV_SHUTDOWN) && - (skb_queue_len(&other->sk_receive_queue) > - other->sk_max_ack_backlog); + unix_recvq_full(other); unix_state_unlock(other); @@ -1058,8 +1064,7 @@ restart: if (other->sk_state != TCP_LISTEN) goto out_unlock; - if (skb_queue_len(&other->sk_receive_queue) > - other->sk_max_ack_backlog) { + if (unix_recvq_full(other)) { err = -EAGAIN; if (!timeo) goto out_unlock; @@ -1428,9 +1433,7 @@ restart: goto out_unlock; } - if (unix_peer(other) != sk && - (skb_queue_len(&other->sk_receive_queue) > - other->sk_max_ack_backlog)) { + if (unix_peer(other) != sk && unix_recvq_full(other)) { if (!timeo) { err = -EAGAIN; goto out_unlock; @@ -1991,6 +1994,64 @@ static unsigned int unix_poll(struct file * file, struct socket *sock, poll_tabl return mask; } +static unsigned int unix_datagram_poll(struct file *file, struct socket *sock, + poll_table *wait) +{ + struct sock *sk = sock->sk, *peer; + unsigned int mask; + + poll_wait(file, sk->sk_sleep, wait); + + peer = unix_peer_get(sk); + if (peer) { + if (peer != sk) { + /* + * Writability of a connected socket additionally + * depends on the state of the receive queue of the + * peer. + */ + poll_wait(file, &unix_sk(peer)->peer_wait, wait); + } else { + sock_put(peer); + peer = NULL; + } + } + + mask = 0; + + /* exceptional events? */ + if (sk->sk_err || !skb_queue_empty(&sk->sk_error_queue)) + mask |= POLLERR; + if (sk->sk_shutdown & RCV_SHUTDOWN) + mask |= POLLRDHUP; + if (sk->sk_shutdown == SHUTDOWN_MASK) + mask |= POLLHUP; + + /* readable? */ + if (!skb_queue_empty(&sk->sk_receive_queue) || + (sk->sk_shutdown & RCV_SHUTDOWN)) + mask |= POLLIN | POLLRDNORM; + + /* Connection-based need to check for termination and startup */ + if (sk->sk_type == SOCK_SEQPACKET) { + if (sk->sk_state == TCP_CLOSE) + mask |= POLLHUP; + /* connection hasn't started yet? */ + if (sk->sk_state == TCP_SYN_SENT) + return mask; + } + + /* writable? */ + if (unix_writable(sk) && !(peer && unix_recvq_full(peer))) + mask |= POLLOUT | POLLWRNORM | POLLWRBAND; + else + set_bit(SOCK_ASYNC_NOSPACE, &sk->sk_socket->flags); + + if (peer) + sock_put(peer); + + return mask; +} #ifdef CONFIG_PROC_FS static struct sock *first_unix_socket(int *i) -- cgit v1.2.3 From 3a5be7d4b079f3a9ce1e8ce4a93ba15ae6d00111 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 18 Jun 2008 01:19:51 -0700 Subject: Revert "mac80211: Use skb_header_cloned() on TX path." This reverts commit 608961a5eca8d3c6bd07172febc27b5559408c5d. The problem is that the mac80211 stack not only needs to be able to muck with the link-level headers, it also might need to mangle all of the packet data if doing sw wireless encryption. This fixes kernel bugzilla #10903. Thanks to Didier Raboud (for the bugzilla report), Andrew Prince (for bisecting), Johannes Berg (for bringing this bisection analysis to my attention), and Ilpo (for trying to analyze this purely from the TCP side). In 2.6.27 we can take another stab at this, by using something like skb_cow_data() when the TX path of mac80211 ends up with a non-NULL tx->key. The ESP protocol code in the IPSEC stack can be used as a model for implementation. Signed-off-by: David S. Miller --- net/mac80211/tx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 1d7dd54aacef..28d8bd53bd3a 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1562,13 +1562,13 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, * be cloned. This could happen, e.g., with Linux bridge code passing * us broadcast frames. */ - if (head_need > 0 || skb_header_cloned(skb)) { + if (head_need > 0 || skb_cloned(skb)) { #if 0 printk(KERN_DEBUG "%s: need to reallocate buffer for %d bytes " "of headroom\n", dev->name, head_need); #endif - if (skb_header_cloned(skb)) + if (skb_cloned(skb)) I802_DEBUG_INC(local->tx_expand_skb_head_cloned); else I802_DEBUG_INC(local->tx_expand_skb_head); -- cgit v1.2.3 From 6d1a3fb567a728d31474636e167c324702a0c38b Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 18 Jun 2008 02:07:07 -0700 Subject: netlink: genl: fix circular locking genetlink has a circular locking dependency when dumping the registered families: - dump start: genl_rcv() : take genl_mutex genl_rcv_msg() : call netlink_dump_start() while holding genl_mutex netlink_dump_start(), netlink_dump() : take nlk->cb_mutex ctrl_dumpfamily() : try to detect this case and not take genl_mutex a second time - dump continuance: netlink_rcv() : call netlink_dump netlink_dump : take nlk->cb_mutex ctrl_dumpfamily() : take genl_mutex Register genl_lock as callback mutex with netlink to fix this. This slightly widens an already existing module unload race, the genl ops used during the dump might go away when the module is unloaded. Thomas Graf is working on a seperate fix for this. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netlink/genetlink.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c index f5aa23c3e886..3e1191cecaf0 100644 --- a/net/netlink/genetlink.c +++ b/net/netlink/genetlink.c @@ -444,8 +444,11 @@ static int genl_rcv_msg(struct sk_buff *skb, struct nlmsghdr *nlh) if (ops->dumpit == NULL) return -EOPNOTSUPP; - return netlink_dump_start(genl_sock, skb, nlh, - ops->dumpit, ops->done); + genl_unlock(); + err = netlink_dump_start(genl_sock, skb, nlh, + ops->dumpit, ops->done); + genl_lock(); + return err; } if (ops->doit == NULL) @@ -603,9 +606,6 @@ static int ctrl_dumpfamily(struct sk_buff *skb, struct netlink_callback *cb) int chains_to_skip = cb->args[0]; int fams_to_skip = cb->args[1]; - if (chains_to_skip != 0) - genl_lock(); - for (i = 0; i < GENL_FAM_TAB_SIZE; i++) { if (i < chains_to_skip) continue; @@ -623,9 +623,6 @@ static int ctrl_dumpfamily(struct sk_buff *skb, struct netlink_callback *cb) } errout: - if (chains_to_skip != 0) - genl_unlock(); - cb->args[0] = i; cb->args[1] = n; @@ -770,7 +767,7 @@ static int __init genl_init(void) /* we'll bump the group number right afterwards */ genl_sock = netlink_kernel_create(&init_net, NETLINK_GENERIC, 0, - genl_rcv, NULL, THIS_MODULE); + genl_rcv, &genl_mutex, THIS_MODULE); if (genl_sock == NULL) panic("GENL: Cannot initialize generic netlink\n"); -- cgit v1.2.3 From b17879f71c2eb4a10f5a63918819d9d572b23a9a Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Wed, 18 Jun 2008 08:34:39 +1000 Subject: [POWERPC] 4xx: Clear new TLB cache attribute bits in Data Storage vector A recent commit added support for the new 440x6 and 464 cores that have the added WL1, IL1I, IL1D, IL2I, and ILD2 bits for the caching attributes in the TLBs. The new bits were cleared in the finish_tlb_load function, however a similar bit of code was missed in the DataStorage interrupt vector. Signed-off-by: Josh Boyer Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/head_44x.S | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index c2b9dc4fce5d..22b5d2c459a3 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -368,7 +368,12 @@ interrupt_base: rlwimi r11,r13,0,26,31 /* Insert static perms */ - rlwinm r11,r11,0,20,15 /* Clear U0-U3 */ + /* + * Clear U0-U3 and WL1 IL1I IL1D IL2I IL2D bits which are added + * on newer 440 cores like the 440x6 used on AMCC 460EX/460GT (see + * include/asm-powerpc/pgtable-ppc32.h for details). + */ + rlwinm r11,r11,0,20,10 /* find the TLB index that caused the fault. It has to be here. */ tlbsx r10, 0, r10 -- cgit v1.2.3 From 65ba6cdc837af9b77354d03987354196ac4eb308 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 18 Jun 2008 16:40:35 +1000 Subject: [POWERPC] Clear sub-page HPTE present bits when demoting page size When we demote a slice from 64k to 4k, and we are about to insert an HPTE for a 4k subpage and we notice that there is an existing 64k HPTE, we first invalidate that HPTE before inserting the new 4k subpage HPTE. Since the bits that encode which hash bucket the old HPTE was in overlap with the bits that encode which of the 16 subpages have HPTEs, we need to clear out the subpage HPTE-present bits before starting to insert HPTEs for the 4k subpages. If we don't do that, we can erroneously think that a subpage already has an HPTE when it doesn't. That in itself wouldn't be such a problem except that when we go to update the HPTE that we think is present on machines with a hypervisor, the hypervisor can tell us that the HPTE we think is there is actually there even though it isn't, which can lead to a process getting stuck in a loop, continually faulting. The reason for the confusion is that the AVPN (abbreviated virtual page number) we are looking for in the HPTE for a 4k subpage can actually match the AVPN in a stale HPTE for another 64k page. For example, the HPTE for the 4k subpage at 0x84000f000 will be in the same hash bucket and have the same AVPN as the HPTE for the 64k page at 0x8400f0000. This fixes the code to clear out the subpage HPTE-present bits. Signed-off-by: Paul Mackerras --- arch/powerpc/mm/hash_low_64.S | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S index 21d248486479..70f4c833fa32 100644 --- a/arch/powerpc/mm/hash_low_64.S +++ b/arch/powerpc/mm/hash_low_64.S @@ -568,6 +568,10 @@ htab_inval_old_hpte: ld r7,STK_PARM(r9)(r1) /* ssize */ ld r8,STK_PARM(r8)(r1) /* local */ bl .flush_hash_page + /* Clear out _PAGE_HPTE_SUB bits in the new linux PTE */ + lis r0,_PAGE_HPTE_SUB@h + ori r0,r0,_PAGE_HPTE_SUB@l + andc r30,r30,r0 b htab_insert_pte htab_bail_ok: -- cgit v1.2.3 From fdf7be6f13b920f0d80c249c70f794a2f6d53992 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Wed, 18 Jun 2008 16:22:48 +0000 Subject: Revert "[WATCHDOG] hpwdt: Fix NMI handling." The old setup works better. Signed-off-by: Thomas Mingarelli Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/hpwdt.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 2bc1f74433ce..2686f3eaeedf 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -418,20 +418,23 @@ static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason, static unsigned long rom_pl; static int die_nmi_called; - if (ulReason == DIE_NMI || ulReason == DIE_NMI_IPI) { - spin_lock_irqsave(&rom_lock, rom_pl); - if (!die_nmi_called) - asminline_call(&cmn_regs, cru_rom_addr); - die_nmi_called = 1; - spin_unlock_irqrestore(&rom_lock, rom_pl); - if (cmn_regs.u1.ral != 0) { - panic("An NMI occurred, please see the Integrated " - "Management Log for details.\n"); - } + if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI) + return NOTIFY_OK; + + spin_lock_irqsave(&rom_lock, rom_pl); + if (!die_nmi_called) + asminline_call(&cmn_regs, cru_rom_addr); + die_nmi_called = 1; + spin_unlock_irqrestore(&rom_lock, rom_pl); + if (cmn_regs.u1.ral == 0) { + printk(KERN_WARNING "hpwdt: An NMI occurred, " + "but unable to determine source.\n"); + } else { + panic("An NMI occurred, please see the Integrated " + "Management Log for details.\n"); } - die_nmi_called = 0; - return NOTIFY_DONE; + return NOTIFY_STOP; } /* -- cgit v1.2.3 From 0bf607c5b4edd13362e4add6ca1e81f8a9fbd47c Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 31 May 2008 19:01:26 +0200 Subject: firewire: don't panic on invalid AR request buffer BUG() at this place is wrong. (Unless if the low level driver would already do higher-level input validation of incoming request headers.) Invalid incoming requests or bugs in the controller which corrupt the AR-req buffer needlessly crashed the box because this is run in tasklet context. Signed-off-by: Stefan Richter --- drivers/firewire/fw-transaction.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c index ccf0e4cf108f..7f92c45349e2 100644 --- a/drivers/firewire/fw-transaction.c +++ b/drivers/firewire/fw-transaction.c @@ -572,7 +572,8 @@ allocate_request(struct fw_packet *p) break; default: - BUG(); + fw_error("ERROR - corrupt request received - %08x %08x %08x\n", + p->header[0], p->header[1], p->header[2]); return NULL; } -- cgit v1.2.3 From ccff962943df539c5860aa120eecc189d70a308b Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 31 May 2008 19:36:06 +0200 Subject: firewire: fw-ohci: use of uninitialized data in AR handler header_length and payload_length are filled with random data if an unknown tcode was read from the AR buffer (i.e. if the AR buffer contained invalid data). We still need a better strategy to recover from this, but at least handle_ar_packet now doesn't return out of bound buffer addresses anymore. Signed-off-by: Stefan Richter --- drivers/firewire/fw-ohci.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 4f02c55f13e1..b062e736b786 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -548,6 +548,11 @@ static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer) p.header_length = 12; p.payload_length = 0; break; + + default: + /* FIXME: Stop context, discard everything, and restart? */ + p.header_length = 0; + p.payload_length = 0; } p.payload = (void *) buffer + p.header_length; -- cgit v1.2.3 From e896ec4302f45fdaf2fc78aec0093eca5478fe28 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Thu, 5 Jun 2008 20:49:38 +0200 Subject: firewire: fw-ohci: disable PHY packet reception into AR context We want the rcvPhyPkt bit in LinkControl off before we start using the chip. However, the spec says that the reset value of it is undefined. Hence switch it explicitly off. https://bugzilla.redhat.com/show_bug.cgi?id=244576#c48 shows that for example the nForce2 integrated FireWire controller seems to have it on by default. Signed-off-by: Stefan Richter Signed-off-by: Jarod Wilson --- drivers/firewire/fw-ohci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index b062e736b786..481d3f3e2ef7 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -1473,6 +1473,8 @@ static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length) reg_write(ohci, OHCI1394_HCControlClear, OHCI1394_HCControl_noByteSwapData); + reg_write(ohci, OHCI1394_LinkControlClear, + OHCI1394_LinkControl_rcvPhyPkt); reg_write(ohci, OHCI1394_LinkControlSet, OHCI1394_LinkControl_rcvSelfID | OHCI1394_LinkControl_cycleTimerEnable | -- cgit v1.2.3 From affc9c24ade666f9903163c12686da567dbfe06f Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Thu, 5 Jun 2008 20:50:53 +0200 Subject: firewire: fw-ohci: write selfIDBufferPtr before LinkControl.rcvSelfID MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit OHCI 1.1 clause 5.10 requires that selfIDBufferPtr is valid when a 1 is written into LinkControl.rcvSelfID. This driver bug has so far not been known to cause harm because most chips obviously accept a later selfIDBufferPtr write, at least before HCControl.linkEnable is written. Signed-off-by: Stefan Richter Signed-off-by: Jarod Wilson Signed-off-by: Kristian Høgsberg --- drivers/firewire/fw-ohci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 481d3f3e2ef7..96e3cce36931 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -1473,6 +1473,7 @@ static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length) reg_write(ohci, OHCI1394_HCControlClear, OHCI1394_HCControl_noByteSwapData); + reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus); reg_write(ohci, OHCI1394_LinkControlClear, OHCI1394_LinkControl_rcvPhyPkt); reg_write(ohci, OHCI1394_LinkControlSet, @@ -1488,7 +1489,6 @@ static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length) ar_context_run(&ohci->ar_request_ctx); ar_context_run(&ohci->ar_response_ctx); - reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus); reg_write(ohci, OHCI1394_PhyUpperBound, 0x00010000); reg_write(ohci, OHCI1394_IntEventClear, ~0); reg_write(ohci, OHCI1394_IntMaskClear, ~0); -- cgit v1.2.3 From 5cb84067d646fa3889463129dad8b218806b4698 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Fri, 6 Jun 2008 22:11:30 +0200 Subject: firewire: fill_bus_reset_event needs lock protection MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Callers of fill_bus_reset_event() have to take card->lock. Otherwise access to node data may oops if node removal is in progress. A lockless alternative would be - event->local_node_id = card->local_node->node_id; + tmp = fw_node_get(card->local_node); + event->local_node_id = tmp->node_id; + fw_node_put(tmp); and ditto with the other node pointers which fill_bus_reset_event() accesses. But I went the locked route because one of the two callers already holds the lock. As a bonus, we don't need the memory barrier anymore because device->generation and device->node_id are written in a card->lock protected section. Signed-off-by: Stefan Richter Signed-off-by: Kristian Høgsberg --- drivers/firewire/fw-cdev.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/firewire/fw-cdev.c b/drivers/firewire/fw-cdev.c index dda14015e873..c639915fc3cb 100644 --- a/drivers/firewire/fw-cdev.c +++ b/drivers/firewire/fw-cdev.c @@ -205,6 +205,7 @@ fw_device_op_read(struct file *file, return dequeue_event(client, buffer, count); } +/* caller must hold card->lock so that node pointers can be dereferenced here */ static void fill_bus_reset_event(struct fw_cdev_event_bus_reset *event, struct client *client) @@ -214,7 +215,6 @@ fill_bus_reset_event(struct fw_cdev_event_bus_reset *event, event->closure = client->bus_reset_closure; event->type = FW_CDEV_EVENT_BUS_RESET; event->generation = client->device->generation; - smp_rmb(); /* node_id must not be older than generation */ event->node_id = client->device->node_id; event->local_node_id = card->local_node->node_id; event->bm_node_id = 0; /* FIXME: We don't track the BM. */ @@ -274,6 +274,7 @@ static int ioctl_get_info(struct client *client, void *buffer) { struct fw_cdev_get_info *get_info = buffer; struct fw_cdev_event_bus_reset bus_reset; + struct fw_card *card = client->device->card; unsigned long ret = 0; client->version = get_info->version; @@ -299,13 +300,17 @@ static int ioctl_get_info(struct client *client, void *buffer) client->bus_reset_closure = get_info->bus_reset_closure; if (get_info->bus_reset != 0) { void __user *uptr = u64_to_uptr(get_info->bus_reset); + unsigned long flags; + spin_lock_irqsave(&card->lock, flags); fill_bus_reset_event(&bus_reset, client); + spin_unlock_irqrestore(&card->lock, flags); + if (copy_to_user(uptr, &bus_reset, sizeof(bus_reset))) return -EFAULT; } - get_info->card = client->device->card->index; + get_info->card = card->index; return 0; } -- cgit v1.2.3 From 161b96e782ec995c55843101976d9c35b57aa109 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 14 Jun 2008 14:23:43 +0200 Subject: firewire: fw-ohci: unify printk prefixes The messages which can be enabled by fw-ohci's debug module parameter are changed from KERN_DEBUG to KERN_NOTICE level and uniformly prefixed with "firewire_ohci: ". This further simplifies communication with users when we ask them to capture debug messages. Signed-off-by: Stefan Richter --- drivers/firewire/fw-ohci.c | 101 +++++++++++++++++++++------------------------ 1 file changed, 48 insertions(+), 53 deletions(-) diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 96e3cce36931..0b66306af479 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -265,27 +265,25 @@ static void log_irqs(u32 evt) !(evt & OHCI1394_busReset)) return; - printk(KERN_DEBUG KBUILD_MODNAME ": IRQ " - "%08x%s%s%s%s%s%s%s%s%s%s%s%s%s\n", - evt, - evt & OHCI1394_selfIDComplete ? " selfID" : "", - evt & OHCI1394_RQPkt ? " AR_req" : "", - evt & OHCI1394_RSPkt ? " AR_resp" : "", - evt & OHCI1394_reqTxComplete ? " AT_req" : "", - evt & OHCI1394_respTxComplete ? " AT_resp" : "", - evt & OHCI1394_isochRx ? " IR" : "", - evt & OHCI1394_isochTx ? " IT" : "", - evt & OHCI1394_postedWriteErr ? " postedWriteErr" : "", - evt & OHCI1394_cycleTooLong ? " cycleTooLong" : "", - evt & OHCI1394_cycle64Seconds ? " cycle64Seconds" : "", - evt & OHCI1394_regAccessFail ? " regAccessFail" : "", - evt & OHCI1394_busReset ? " busReset" : "", - evt & ~(OHCI1394_selfIDComplete | OHCI1394_RQPkt | - OHCI1394_RSPkt | OHCI1394_reqTxComplete | - OHCI1394_respTxComplete | OHCI1394_isochRx | - OHCI1394_isochTx | OHCI1394_postedWriteErr | - OHCI1394_cycleTooLong | OHCI1394_cycle64Seconds | - OHCI1394_regAccessFail | OHCI1394_busReset) + fw_notify("IRQ %08x%s%s%s%s%s%s%s%s%s%s%s%s%s\n", evt, + evt & OHCI1394_selfIDComplete ? " selfID" : "", + evt & OHCI1394_RQPkt ? " AR_req" : "", + evt & OHCI1394_RSPkt ? " AR_resp" : "", + evt & OHCI1394_reqTxComplete ? " AT_req" : "", + evt & OHCI1394_respTxComplete ? " AT_resp" : "", + evt & OHCI1394_isochRx ? " IR" : "", + evt & OHCI1394_isochTx ? " IT" : "", + evt & OHCI1394_postedWriteErr ? " postedWriteErr" : "", + evt & OHCI1394_cycleTooLong ? " cycleTooLong" : "", + evt & OHCI1394_cycle64Seconds ? " cycle64Seconds" : "", + evt & OHCI1394_regAccessFail ? " regAccessFail" : "", + evt & OHCI1394_busReset ? " busReset" : "", + evt & ~(OHCI1394_selfIDComplete | OHCI1394_RQPkt | + OHCI1394_RSPkt | OHCI1394_reqTxComplete | + OHCI1394_respTxComplete | OHCI1394_isochRx | + OHCI1394_isochTx | OHCI1394_postedWriteErr | + OHCI1394_cycleTooLong | OHCI1394_cycle64Seconds | + OHCI1394_regAccessFail | OHCI1394_busReset) ? " ?" : ""); } @@ -308,23 +306,22 @@ static void log_selfids(int node_id, int generation, int self_id_count, u32 *s) if (likely(!(param_debug & OHCI_PARAM_DEBUG_SELFIDS))) return; - printk(KERN_DEBUG KBUILD_MODNAME ": %d selfIDs, generation %d, " - "local node ID %04x\n", self_id_count, generation, node_id); + fw_notify("%d selfIDs, generation %d, local node ID %04x\n", + self_id_count, generation, node_id); for (; self_id_count--; ++s) if ((*s & 1 << 23) == 0) - printk(KERN_DEBUG "selfID 0: %08x, phy %d [%c%c%c] " - "%s gc=%d %s %s%s%s\n", - *s, *s >> 24 & 63, _p(s, 6), _p(s, 4), _p(s, 2), - speed[*s >> 14 & 3], *s >> 16 & 63, - power[*s >> 8 & 7], *s >> 22 & 1 ? "L" : "", - *s >> 11 & 1 ? "c" : "", *s & 2 ? "i" : ""); + fw_notify("selfID 0: %08x, phy %d [%c%c%c] " + "%s gc=%d %s %s%s%s\n", + *s, *s >> 24 & 63, _p(s, 6), _p(s, 4), _p(s, 2), + speed[*s >> 14 & 3], *s >> 16 & 63, + power[*s >> 8 & 7], *s >> 22 & 1 ? "L" : "", + *s >> 11 & 1 ? "c" : "", *s & 2 ? "i" : ""); else - printk(KERN_DEBUG "selfID n: %08x, phy %d " - "[%c%c%c%c%c%c%c%c]\n", - *s, *s >> 24 & 63, - _p(s, 16), _p(s, 14), _p(s, 12), _p(s, 10), - _p(s, 8), _p(s, 6), _p(s, 4), _p(s, 2)); + fw_notify("selfID n: %08x, phy %d [%c%c%c%c%c%c%c%c]\n", + *s, *s >> 24 & 63, + _p(s, 16), _p(s, 14), _p(s, 12), _p(s, 10), + _p(s, 8), _p(s, 6), _p(s, 4), _p(s, 2)); } static const char *evts[] = { @@ -373,15 +370,14 @@ static void log_ar_at_event(char dir, int speed, u32 *header, int evt) evt = 0x1f; if (evt == OHCI1394_evt_bus_reset) { - printk(KERN_DEBUG "A%c evt_bus_reset, generation %d\n", - dir, (header[2] >> 16) & 0xff); + fw_notify("A%c evt_bus_reset, generation %d\n", + dir, (header[2] >> 16) & 0xff); return; } if (header[0] == ~header[1]) { - printk(KERN_DEBUG "A%c %s, %s, %08x\n", - dir, evts[evt], phys[header[0] >> 30 & 0x3], - header[0]); + fw_notify("A%c %s, %s, %08x\n", + dir, evts[evt], phys[header[0] >> 30 & 0x3], header[0]); return; } @@ -400,24 +396,23 @@ static void log_ar_at_event(char dir, int speed, u32 *header, int evt) switch (tcode) { case 0xe: case 0xa: - printk(KERN_DEBUG "A%c %s, %s\n", - dir, evts[evt], tcodes[tcode]); + fw_notify("A%c %s, %s\n", dir, evts[evt], tcodes[tcode]); break; case 0x0: case 0x1: case 0x4: case 0x5: case 0x9: - printk(KERN_DEBUG "A%c spd %x tl %02x, " - "%04x -> %04x, %s, " - "%s, %04x%08x%s\n", - dir, speed, header[0] >> 10 & 0x3f, - header[1] >> 16, header[0] >> 16, evts[evt], - tcodes[tcode], header[1] & 0xffff, header[2], specific); + fw_notify("A%c spd %x tl %02x, " + "%04x -> %04x, %s, " + "%s, %04x%08x%s\n", + dir, speed, header[0] >> 10 & 0x3f, + header[1] >> 16, header[0] >> 16, evts[evt], + tcodes[tcode], header[1] & 0xffff, header[2], specific); break; default: - printk(KERN_DEBUG "A%c spd %x tl %02x, " - "%04x -> %04x, %s, " - "%s%s\n", - dir, speed, header[0] >> 10 & 0x3f, - header[1] >> 16, header[0] >> 16, evts[evt], - tcodes[tcode], specific); + fw_notify("A%c spd %x tl %02x, " + "%04x -> %04x, %s, " + "%s%s\n", + dir, speed, header[0] >> 10 & 0x3f, + header[1] >> 16, header[0] >> 16, evts[evt], + tcodes[tcode], specific); } } -- cgit v1.2.3 From ae1e53557911d7e60a637b2400173add958aae94 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Wed, 18 Jun 2008 18:20:45 +0200 Subject: firewire: deadline for PHY config transmission If the low-level driver failed to initialize a card properly without noticing it, fw-core was blocked indefinitely when trying to send a PHY config packet. This hung up the events kernel thread, e.g. locked up keyboard input. https://bugzilla.redhat.com/show_bug.cgi?id=444694 https://bugzilla.redhat.com/show_bug.cgi?id=446763 This problem was introduced between 2.6.25 and 2.6.26-rc1 by commit 2a0a2590498be7b92e3e76409c9b8ee722e23c8f "firewire: wait until PHY configuration packet was transmitted (fix bus reset loop)". The solution is to wait with timeout. I tested it with 7 different working controllers and 1 non-working controller. On the working ones, the packet callback complete()s usually --- but not always --- before a timeout of 10ms. Hence I chose a safer timeout of 100ms. On the few tests with the non-working controller ALi M5271, PHY config packet transmission always timed out so far. (Fw-ohci needs to be fixed for this controller independently of this deadline fix. Often the core doesn't even attempt to send a phy config because not even self ID reception works.) Signed-off-by: Stefan Richter --- drivers/firewire/fw-transaction.c | 49 +++++++++++++++++++++++++++------------ 1 file changed, 34 insertions(+), 15 deletions(-) diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c index 7f92c45349e2..03ae8a77c479 100644 --- a/drivers/firewire/fw-transaction.c +++ b/drivers/firewire/fw-transaction.c @@ -20,6 +20,7 @@ #include #include +#include #include #include #include @@ -297,37 +298,55 @@ EXPORT_SYMBOL(fw_send_request); struct fw_phy_packet { struct fw_packet packet; struct completion done; + struct kref kref; }; -static void -transmit_phy_packet_callback(struct fw_packet *packet, - struct fw_card *card, int status) +static void phy_packet_release(struct kref *kref) +{ + struct fw_phy_packet *p = + container_of(kref, struct fw_phy_packet, kref); + kfree(p); +} + +static void transmit_phy_packet_callback(struct fw_packet *packet, + struct fw_card *card, int status) { struct fw_phy_packet *p = container_of(packet, struct fw_phy_packet, packet); complete(&p->done); + kref_put(&p->kref, phy_packet_release); } void fw_send_phy_config(struct fw_card *card, int node_id, int generation, int gap_count) { - struct fw_phy_packet p; + struct fw_phy_packet *p; + long timeout = DIV_ROUND_UP(HZ, 10); u32 data = PHY_IDENTIFIER(PHY_PACKET_CONFIG) | PHY_CONFIG_ROOT_ID(node_id) | PHY_CONFIG_GAP_COUNT(gap_count); - p.packet.header[0] = data; - p.packet.header[1] = ~data; - p.packet.header_length = 8; - p.packet.payload_length = 0; - p.packet.speed = SCODE_100; - p.packet.generation = generation; - p.packet.callback = transmit_phy_packet_callback; - init_completion(&p.done); - - card->driver->send_request(card, &p.packet); - wait_for_completion(&p.done); + p = kmalloc(sizeof(*p), GFP_KERNEL); + if (p == NULL) + return; + + p->packet.header[0] = data; + p->packet.header[1] = ~data; + p->packet.header_length = 8; + p->packet.payload_length = 0; + p->packet.speed = SCODE_100; + p->packet.generation = generation; + p->packet.callback = transmit_phy_packet_callback; + init_completion(&p->done); + kref_set(&p->kref, 2); + + card->driver->send_request(card, &p->packet); + timeout = wait_for_completion_timeout(&p->done, timeout); + kref_put(&p->kref, phy_packet_release); + + /* will leak p if the callback is never executed */ + WARN_ON(timeout == 0); } void fw_flush_transactions(struct fw_card *card) -- cgit v1.2.3 From a7b64b8704b03c9972b114932fdf517e06153f11 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 14 Jun 2008 14:24:53 +0200 Subject: firewire: Kconfig menu touch-up Emphasize the recommendation to build only one stack. Trim the prompts to better fit into short attention spans. Signed-off-by: Stefan Richter --- drivers/firewire/Kconfig | 32 +++++++++++++++----------------- 1 file changed, 15 insertions(+), 17 deletions(-) diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig index fb4d391810b6..76f26710fc16 100644 --- a/drivers/firewire/Kconfig +++ b/drivers/firewire/Kconfig @@ -1,28 +1,26 @@ -comment "An alternative FireWire stack is available with EXPERIMENTAL=y" +comment "A new alternative FireWire stack is available with EXPERIMENTAL=y" depends on EXPERIMENTAL=n +comment "Enable only one of the two stacks, unless you know what you are doing" + depends on EXPERIMENTAL + config FIREWIRE - tristate "IEEE 1394 (FireWire) support - alternative stack, EXPERIMENTAL" + tristate "New FireWire stack, EXPERIMENTAL" depends on EXPERIMENTAL select CRC_ITU_T help This is the "Juju" FireWire stack, a new alternative implementation designed for robustness and simplicity. You can build either this - stack, or the classic stack (the ieee1394 driver, ohci1394 etc.) - or both. Please read http://wiki.linux1394.org/JujuMigration before - you enable the new stack. + stack, or the old stack (the ieee1394 driver, ohci1394 etc.) or both. + Please read http://wiki.linux1394.org/JujuMigration before you + enable the new stack. To compile this driver as a module, say M here: the module will be called firewire-core. It functionally replaces ieee1394, raw1394, and video1394. - NOTE: - - You should only build ONE of the stacks, unless you REALLY know what - you are doing. - config FIREWIRE_OHCI - tristate "Support for OHCI FireWire host controllers" + tristate "OHCI-1394 controllers" depends on PCI && FIREWIRE help Enable this driver if you have a FireWire controller based @@ -33,12 +31,12 @@ config FIREWIRE_OHCI called firewire-ohci. It replaces ohci1394 of the classic IEEE 1394 stack. - NOTE: + NOTE: - You should only build ohci1394 or firewire-ohci, but not both. - If you nevertheless want to install both, you should configure them - only as modules and blacklist the driver(s) which you don't want to - have auto-loaded. Add either + You should only build either firewire-ohci or the old ohci1394 driver, + but not both. If you nevertheless want to install both, you should + configure them only as modules and blacklist the driver(s) which you + don't want to have auto-loaded. Add either blacklist firewire-ohci or @@ -60,7 +58,7 @@ config FIREWIRE_OHCI_DEBUG default y config FIREWIRE_SBP2 - tristate "Support for storage devices (SBP-2 protocol driver)" + tristate "Storage devices (SBP-2 protocol)" depends on FIREWIRE && SCSI help This option enables you to use SBP-2 devices connected to a -- cgit v1.2.3 From 9499fe2b340d19ef55c349de794db9d917e7403f Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Mon, 16 Jun 2008 01:39:28 +0200 Subject: ieee1394: Kconfig menu touch-up Rename and reorder some prompts and modify some help texts. The result: -------------------- IEEE 1394 (FireWire) support -------------------- *** Enable only one of the two stacks, unless you know what you are doing *** New FireWire stack, EXPERIMENTAL OHCI-1394 controllers Storage devices (SBP-2 protocol) Stable FireWire stack OHCI-1394 controllers PCILynx controller Storage devices (SBP-2 protocol) Enable replacement for physical DMA in SBP2 IP over 1394 raw1394 userspace interface video1394 userspace interface dv1394 userspace interface (deprecated) Excessive debugging output The old prompts for reference: -------------------- IEEE 1394 (FireWire) support -------------------- IEEE 1394 (FireWire) support - alternative stack, EXPERIMENTAL Support for OHCI FireWire host controllers Support for storage devices (SBP-2 protocol driver) IEEE 1394 (FireWire) support *** Subsystem Options *** Excessive debugging output *** Controllers *** Texas Instruments PCILynx support OHCI-1394 support *** Protocols *** OHCI-1394 Video support SBP-2 support (Harddisks etc.) Enable replacement for physical DMA in SBP2 IP over 1394 OHCI-DV I/O support (deprecated) Raw IEEE1394 I/O support Signed-off-by: Stefan Richter --- drivers/ieee1394/Kconfig | 118 ++++++++++++++++++++++++++--------------------- 1 file changed, 66 insertions(+), 52 deletions(-) diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig index 545663ef820b..95f45f9b8e5e 100644 --- a/drivers/ieee1394/Kconfig +++ b/drivers/ieee1394/Kconfig @@ -4,7 +4,7 @@ menu "IEEE 1394 (FireWire) support" source "drivers/firewire/Kconfig" config IEEE1394 - tristate "IEEE 1394 (FireWire) support" + tristate "Stable FireWire stack" depends on PCI || BROKEN help IEEE 1394 describes a high performance serial bus, which is also @@ -19,30 +19,45 @@ config IEEE1394 To compile this driver as a module, say M here: the module will be called ieee1394. -comment "Subsystem Options" - depends on IEEE1394 - -config IEEE1394_VERBOSEDEBUG - bool "Excessive debugging output" - depends on IEEE1394 +config IEEE1394_OHCI1394 + tristate "OHCI-1394 controllers" + depends on PCI && IEEE1394 help - If you say Y here, you will get very verbose debugging logs from - the subsystem which includes a dump of the header of every sent - and received packet. This can amount to a high amount of data - collected in a very short time which is usually also saved to - disk by the system logging daemons. + Enable this driver if you have an IEEE 1394 controller based on the + OHCI-1394 specification. The current driver is only tested with OHCI + chipsets made by Texas Instruments and NEC. Most third-party vendors + use one of these chipsets. It should work with any OHCI-1394 + compliant card, however. - Say Y if you really want or need the debugging output, everyone - else says N. + To compile this driver as a module, say M here: the + module will be called ohci1394. -comment "Controllers" - depends on IEEE1394 + NOTE: -comment "Texas Instruments PCILynx requires I2C" + You should only build either ohci1394 or the new firewire-ohci driver, + but not both. If you nevertheless want to install both, you should + configure them only as modules and blacklist the driver(s) which you + don't want to have auto-loaded. Add either + + blacklist firewire-ohci + or + blacklist ohci1394 + blacklist video1394 + blacklist dv1394 + + to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf + depending on your distribution. The latter two modules should be + blacklisted together with ohci1394 because they depend on ohci1394. + + If you have an old modprobe which doesn't implement the blacklist + directive, use "install modulename /bin/true" for the modules to be + blacklisted. + +comment "PCILynx controller requires I2C" depends on IEEE1394 && I2C=n config IEEE1394_PCILYNX - tristate "Texas Instruments PCILynx support" + tristate "PCILynx controller" depends on PCI && IEEE1394 && I2C select I2C_ALGOBIT help @@ -57,35 +72,11 @@ config IEEE1394_PCILYNX PowerMacs G3 B&W contain the PCILynx controller. Therefore almost everybody can say N here. -config IEEE1394_OHCI1394 - tristate "OHCI-1394 support" - depends on PCI && IEEE1394 - help - Enable this driver if you have an IEEE 1394 controller based on the - OHCI-1394 specification. The current driver is only tested with OHCI - chipsets made by Texas Instruments and NEC. Most third-party vendors - use one of these chipsets. It should work with any OHCI-1394 - compliant card, however. - - To compile this driver as a module, say M here: the - module will be called ohci1394. - -comment "Protocols" - depends on IEEE1394 - -config IEEE1394_VIDEO1394 - tristate "OHCI-1394 Video support" - depends on IEEE1394 && IEEE1394_OHCI1394 - help - This option enables video device usage for OHCI-1394 cards. Enable - this option only if you have an IEEE 1394 video device connected to - an OHCI-1394 card. - comment "SBP-2 support (for storage devices) requires SCSI" depends on IEEE1394 && SCSI=n config IEEE1394_SBP2 - tristate "SBP-2 support (Harddisks etc.)" + tristate "Storage devices (SBP-2 protocol)" depends on IEEE1394 && SCSI help This option enables you to use SBP-2 devices connected to an IEEE @@ -127,24 +118,47 @@ config IEEE1394_ETH1394 The module is called eth1394 although it does not emulate Ethernet. +config IEEE1394_RAWIO + tristate "raw1394 userspace interface" + depends on IEEE1394 + help + This option adds support for the raw1394 device file which enables + direct communication of user programs with IEEE 1394 devices + (isochronous and asynchronous). Almost all application programs + which access FireWire require this option. + + To compile this driver as a module, say M here: the module will be + called raw1394. + +config IEEE1394_VIDEO1394 + tristate "video1394 userspace interface" + depends on IEEE1394 && IEEE1394_OHCI1394 + help + This option adds support for the video1394 device files which enable + isochronous communication of user programs with IEEE 1394 devices, + especially video capture or export. This interface is used by all + libdc1394 based programs and by several other programs, in addition to + the raw1394 interface. It is generally not required for DV capture. + + To compile this driver as a module, say M here: the module will be + called video1394. + config IEEE1394_DV1394 - tristate "OHCI-DV I/O support (deprecated)" + tristate "dv1394 userspace interface (deprecated)" depends on IEEE1394 && IEEE1394_OHCI1394 help The dv1394 driver is unsupported and may be removed from Linux in a future release. Its functionality is now provided by raw1394 together with libraries such as libiec61883. -config IEEE1394_RAWIO - tristate "Raw IEEE1394 I/O support" +config IEEE1394_VERBOSEDEBUG + bool "Excessive debugging output" depends on IEEE1394 help - This option adds support for the raw1394 device file which enables - direct communication of user programs with the IEEE 1394 bus and thus - with the attached peripherals. Almost all application programs which - access FireWire require this option. + If you say Y here, you will get very verbose debugging logs from the + ieee1394 drivers, including sent and received packet headers. This + will quickly result in large amounts of data sent to the system log. - To compile this driver as a module, say M here: the module will be - called raw1394. + Say Y if you really need the debugging output. Everyone else says N. endmenu -- cgit v1.2.3 From fb77bcef9f7be78e3e11543cb5abbcb1b1fac53e Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Wed, 18 Jun 2008 15:36:38 -0700 Subject: IB/uverbs: Fix check of is_closed flag check in ib_uverbs_async_handler() Commit 1ae5c187 ("IB/uverbs: Don't store struct file * for event files") changed the way that closed files are handled in the uverbs code. However, after the conversion, is_closed flag is checked incorrectly in ib_uverbs_async_handler(). As a result, no async events are ever passed to applications. Found by: Ronni Zimmerman Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/core/uverbs_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index f806da184b51..caed42bf7ef5 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -423,7 +423,7 @@ static void ib_uverbs_async_handler(struct ib_uverbs_file *file, unsigned long flags; spin_lock_irqsave(&file->async_file->lock, flags); - if (!file->async_file->is_closed) { + if (file->async_file->is_closed) { spin_unlock_irqrestore(&file->async_file->lock, flags); return; } -- cgit v1.2.3 From ef3a62d272f033989e83eb1f26505f93f93e3e69 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 18 Jun 2008 15:39:48 -0700 Subject: mac80211: detect driver tx bugs When a driver rejects a frame in it's ->tx() callback, it must also stop queues, otherwise mac80211 can go into a loop here. Detect this situation and abort the loop after five retries, warning about the driver bug. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- net/mac80211/tx.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 28d8bd53bd3a..c80d5899f279 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1132,7 +1132,7 @@ static int ieee80211_tx(struct net_device *dev, struct sk_buff *skb, ieee80211_tx_handler *handler; struct ieee80211_tx_data tx; ieee80211_tx_result res = TX_DROP, res_prepare; - int ret, i; + int ret, i, retries = 0; WARN_ON(__ieee80211_queue_pending(local, control->queue)); @@ -1216,6 +1216,13 @@ retry: if (!__ieee80211_queue_stopped(local, control->queue)) { clear_bit(IEEE80211_LINK_STATE_PENDING, &local->state[control->queue]); + retries++; + /* + * Driver bug, it's rejecting packets but + * not stopping queues. + */ + if (WARN_ON_ONCE(retries > 5)) + goto drop; goto retry; } memcpy(&store->control, control, -- cgit v1.2.3 From dcd981a77b2b35d169656d4b9cee208096ed7ccf Mon Sep 17 00:00:00 2001 From: Greg KH Date: Thu, 19 Jun 2008 09:52:26 +1000 Subject: agp/via: fixup pci ids add a new PCI ID and remove an old dodgy one, include the explaination in the commented code so nobody readds later. (davej also sent the pci id addition). Signed-off-by: Dave Airlie --- drivers/char/agp/via-agp.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/char/agp/via-agp.c b/drivers/char/agp/via-agp.c index 0ecc54d327bc..7b36476dff41 100644 --- a/drivers/char/agp/via-agp.c +++ b/drivers/char/agp/via-agp.c @@ -389,11 +389,20 @@ static struct agp_device_ids via_agp_device_ids[] __devinitdata = .device_id = PCI_DEVICE_ID_VIA_VT3324, .chipset_name = "CX700", }, - /* VT3336 */ + /* VT3336 - this is a chipset for AMD Athlon/K8 CPU. Due to K8's unique + * architecture, the AGP resource and behavior are different from + * the traditional AGP which resides only in chipset. AGP is used + * by 3D driver which wasn't available for the VT3336 and VT3364 + * generation until now. Unfortunately, by testing, VT3364 works + * but VT3336 doesn't. - explaination from via, just leave this as + * as a placeholder to avoid future patches adding it back in. + */ +#if 0 { .device_id = PCI_DEVICE_ID_VIA_VT3336, .chipset_name = "VT3336", }, +#endif /* P4M890 */ { .device_id = PCI_DEVICE_ID_VIA_P4M890, @@ -546,8 +555,8 @@ static const struct pci_device_id agp_via_pci_table[] = { ID(PCI_DEVICE_ID_VIA_3296_0), ID(PCI_DEVICE_ID_VIA_P4M800CE), ID(PCI_DEVICE_ID_VIA_VT3324), - ID(PCI_DEVICE_ID_VIA_VT3336), ID(PCI_DEVICE_ID_VIA_P4M890), + ID(PCI_DEVICE_ID_VIA_VT3364), { } }; -- cgit v1.2.3 From da503fa60b84d5945deb3ab74efdd0bec61df4a1 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 18 Jun 2008 09:28:00 +0100 Subject: agp: two-stage page destruction issue besides it apparently being useful only in 2.6.24 (the changes in 2.6.25 really mean that it could be converted back to a single-stage mechanism), I'm seeing an issue in Xen Dom0 kernels, which is caused by the calling of gart_to_virt() in the second stage invocations of the destroy function. I think that besides this being a real issue with Xen (where unmap_page_from_agp() is not just a page table attribute change), this also is invalid from a theoretical perspective: One should not assume that gart_to_virt() is still valid after unmapping a page. So minimally (keeping the 2-stage mechanism) a patch like the one below would be needed. Jan Signed-off-by: Dave Airlie --- drivers/char/agp/backend.c | 16 ++++++++-------- drivers/char/agp/generic.c | 7 +++++-- drivers/char/agp/intel-agp.c | 6 ++++-- 3 files changed, 17 insertions(+), 12 deletions(-) diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c index b1bdd015165c..1ec87104e68c 100644 --- a/drivers/char/agp/backend.c +++ b/drivers/char/agp/backend.c @@ -188,10 +188,10 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge) err_out: if (bridge->driver->needs_scratch_page) { - bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real), - AGP_PAGE_DESTROY_UNMAP); - bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real), - AGP_PAGE_DESTROY_FREE); + void *va = gart_to_virt(bridge->scratch_page_real); + + bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP); + bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE); } if (got_gatt) bridge->driver->free_gatt_table(bridge); @@ -215,10 +215,10 @@ static void agp_backend_cleanup(struct agp_bridge_data *bridge) if (bridge->driver->agp_destroy_page && bridge->driver->needs_scratch_page) { - bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real), - AGP_PAGE_DESTROY_UNMAP); - bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real), - AGP_PAGE_DESTROY_FREE); + void *va = gart_to_virt(bridge->scratch_page_real); + + bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP); + bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE); } } diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index 7fc0c99a3a58..b6650a63197d 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -202,10 +202,13 @@ void agp_free_memory(struct agp_memory *curr) } if (curr->page_count != 0) { for (i = 0; i < curr->page_count; i++) { - curr->bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[i]), AGP_PAGE_DESTROY_UNMAP); + curr->memory[i] = (unsigned long)gart_to_virt(curr->memory[i]); + curr->bridge->driver->agp_destroy_page((void *)curr->memory[i], + AGP_PAGE_DESTROY_UNMAP); } for (i = 0; i < curr->page_count; i++) { - curr->bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[i]), AGP_PAGE_DESTROY_FREE); + curr->bridge->driver->agp_destroy_page((void *)curr->memory[i], + AGP_PAGE_DESTROY_FREE); } } agp_free_key(curr->key); diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index eeea50a1d22a..01b03402ea92 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -418,9 +418,11 @@ static void intel_i810_free_by_type(struct agp_memory *curr) if (curr->page_count == 4) i8xx_destroy_pages(gart_to_virt(curr->memory[0])); else { - agp_bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[0]), + void *va = gart_to_virt(curr->memory[0]); + + agp_bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP); - agp_bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[0]), + agp_bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE); } agp_free_page_array(curr); -- cgit v1.2.3 From c72580129209aaa509ace81c1f2ee1caa9c9774b Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 26 Mar 2008 14:10:02 -0700 Subject: drivers/char/agp - use bool Use boolean in AGP instead of having own TRUE/FALSE -- Signed-off-by: Joe Perches Signed-off-by: Dave Airlie --- drivers/char/agp/agp.h | 6 +++--- drivers/char/agp/alpha-agp.c | 4 ++-- drivers/char/agp/amd-k7-agp.c | 4 ++-- drivers/char/agp/amd64-agp.c | 4 ++-- drivers/char/agp/ati-agp.c | 4 ++-- drivers/char/agp/efficeon-agp.c | 6 +++--- drivers/char/agp/generic.c | 24 ++++++++++++------------ drivers/char/agp/hp-agp.c | 6 +++--- drivers/char/agp/i460-agp.c | 2 +- drivers/char/agp/intel-agp.c | 10 +++++----- drivers/char/agp/nvidia-agp.c | 4 ++-- drivers/char/agp/parisc-agp.c | 6 +++--- drivers/char/agp/sgi-agp.c | 8 ++++---- drivers/char/agp/sworks-agp.c | 6 +++--- drivers/char/agp/uninorth-agp.c | 10 +++++----- include/linux/agp_backend.h | 14 +++----------- 16 files changed, 55 insertions(+), 63 deletions(-) diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h index 99e6a406efb4..81e14bea54bd 100644 --- a/drivers/char/agp/agp.h +++ b/drivers/char/agp/agp.h @@ -99,8 +99,8 @@ struct agp_bridge_driver { const void *aperture_sizes; int num_aperture_sizes; enum aper_size_type size_type; - int cant_use_aperture; - int needs_scratch_page; + bool cant_use_aperture; + bool needs_scratch_page; const struct gatt_mask *masks; int (*fetch_size)(void); int (*configure)(void); @@ -278,7 +278,7 @@ void agp_generic_destroy_page(void *addr, int flags); void agp_free_key(int key); int agp_num_entries(void); u32 agp_collect_device_status(struct agp_bridge_data *bridge, u32 mode, u32 command); -void agp_device_command(u32 command, int agp_v3); +void agp_device_command(u32 command, bool agp_v3); int agp_3_5_enable(struct agp_bridge_data *bridge); void global_cache_flush(void); void get_agp_version(struct agp_bridge_data *bridge); diff --git a/drivers/char/agp/alpha-agp.c b/drivers/char/agp/alpha-agp.c index e77c17838c8a..5da89f6c6c25 100644 --- a/drivers/char/agp/alpha-agp.c +++ b/drivers/char/agp/alpha-agp.c @@ -80,7 +80,7 @@ static void alpha_core_agp_enable(struct agp_bridge_data *bridge, u32 mode) agp->mode.bits.enable = 1; agp->ops->configure(agp); - agp_device_command(agp->mode.lw, 0); + agp_device_command(agp->mode.lw, false); } static int alpha_core_agp_insert_memory(struct agp_memory *mem, off_t pg_start, @@ -126,7 +126,7 @@ struct agp_bridge_driver alpha_core_agp_driver = { .aperture_sizes = alpha_core_agp_sizes, .num_aperture_sizes = 1, .size_type = FIXED_APER_SIZE, - .cant_use_aperture = 1, + .cant_use_aperture = true, .masks = NULL, .fetch_size = alpha_core_agp_fetch_size, diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c index 96bdb9296b07..39a0718bc616 100644 --- a/drivers/char/agp/amd-k7-agp.c +++ b/drivers/char/agp/amd-k7-agp.c @@ -314,9 +314,9 @@ static int amd_insert_memory(struct agp_memory *mem, off_t pg_start, int type) j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index d8200ac8f8cb..13665db363d6 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -90,9 +90,9 @@ static int amd64_insert_memory(struct agp_memory *mem, off_t pg_start, int type) j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c index 07b4d8ff56e5..3a4566c0d84f 100644 --- a/drivers/char/agp/ati-agp.c +++ b/drivers/char/agp/ati-agp.c @@ -287,10 +287,10 @@ static int ati_insert_memory(struct agp_memory * mem, j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { /*CACHE_FLUSH(); */ global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { diff --git a/drivers/char/agp/efficeon-agp.c b/drivers/char/agp/efficeon-agp.c index cac0009cebc1..8ca6f262ef85 100644 --- a/drivers/char/agp/efficeon-agp.c +++ b/drivers/char/agp/efficeon-agp.c @@ -249,9 +249,9 @@ static int efficeon_insert_memory(struct agp_memory * mem, off_t pg_start, int t if (type != 0 || mem->type != 0) return -EINVAL; - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } last_page = NULL; @@ -329,7 +329,7 @@ static const struct agp_bridge_driver efficeon_driver = { .free_gatt_table = efficeon_free_gatt_table, .insert_memory = efficeon_insert_memory, .remove_memory = efficeon_remove_memory, - .cant_use_aperture = 0, // 1 might be faster? + .cant_use_aperture = false, // true might be faster? // Generic .alloc_by_type = agp_generic_alloc_by_type, diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index b6650a63197d..3e3625affdd1 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -188,7 +188,7 @@ void agp_free_memory(struct agp_memory *curr) if (curr == NULL) return; - if (curr->is_bound == TRUE) + if (curr->is_bound) agp_unbind_memory(curr); if (curr->type >= AGP_USER_TYPES) { @@ -414,20 +414,20 @@ int agp_bind_memory(struct agp_memory *curr, off_t pg_start) if (curr == NULL) return -EINVAL; - if (curr->is_bound == TRUE) { + if (curr->is_bound) { printk(KERN_INFO PFX "memory %p is already bound!\n", curr); return -EINVAL; } - if (curr->is_flushed == FALSE) { + if (!curr->is_flushed) { curr->bridge->driver->cache_flush(); - curr->is_flushed = TRUE; + curr->is_flushed = true; } ret_val = curr->bridge->driver->insert_memory(curr, pg_start, curr->type); if (ret_val != 0) return ret_val; - curr->is_bound = TRUE; + curr->is_bound = true; curr->pg_start = pg_start; return 0; } @@ -449,7 +449,7 @@ int agp_unbind_memory(struct agp_memory *curr) if (curr == NULL) return -EINVAL; - if (curr->is_bound != TRUE) { + if (!curr->is_bound) { printk(KERN_INFO PFX "memory %p was not bound!\n", curr); return -EINVAL; } @@ -459,7 +459,7 @@ int agp_unbind_memory(struct agp_memory *curr) if (ret_val != 0) return ret_val; - curr->is_bound = FALSE; + curr->is_bound = false; curr->pg_start = 0; return 0; } @@ -757,7 +757,7 @@ u32 agp_collect_device_status(struct agp_bridge_data *bridge, u32 requested_mode EXPORT_SYMBOL(agp_collect_device_status); -void agp_device_command(u32 bridge_agpstat, int agp_v3) +void agp_device_command(u32 bridge_agpstat, bool agp_v3) { struct pci_dev *device = NULL; int mode; @@ -821,7 +821,7 @@ void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode) /* If we have 3.5, we can do the isoch stuff. */ if (bridge->minor_version >= 5) agp_3_5_enable(bridge); - agp_device_command(bridge_agpstat, TRUE); + agp_device_command(bridge_agpstat, true); return; } else { /* Disable calibration cycle in RX91<1> when not in AGP3.0 mode of operation.*/ @@ -838,7 +838,7 @@ void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode) } /* AGP v<3 */ - agp_device_command(bridge_agpstat, FALSE); + agp_device_command(bridge_agpstat, false); } EXPORT_SYMBOL(agp_generic_enable); @@ -1086,9 +1086,9 @@ int agp_generic_insert_memory(struct agp_memory * mem, off_t pg_start, int type) j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { bridge->driver->cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { diff --git a/drivers/char/agp/hp-agp.c b/drivers/char/agp/hp-agp.c index cbb0444467ba..80d7317f85c9 100644 --- a/drivers/char/agp/hp-agp.c +++ b/drivers/char/agp/hp-agp.c @@ -353,9 +353,9 @@ hp_zx1_insert_memory (struct agp_memory *mem, off_t pg_start, int type) j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = io_pg_start; i < mem->page_count; i++) { @@ -437,7 +437,7 @@ const struct agp_bridge_driver hp_zx1_driver = { .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, + .cant_use_aperture = true, }; static int __init diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c index 76f581c85a7d..e587eebebc67 100644 --- a/drivers/char/agp/i460-agp.c +++ b/drivers/char/agp/i460-agp.c @@ -580,7 +580,7 @@ const struct agp_bridge_driver intel_i460_driver = { .alloc_by_type = agp_generic_alloc_by_type, .free_by_type = agp_generic_free_by_type, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, + .cant_use_aperture = true, }; static int __devinit agp_intel_i460_probe(struct pci_dev *pdev, diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 01b03402ea92..6800b7e5b6f5 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -1658,7 +1658,7 @@ static const struct agp_bridge_driver intel_810_driver = { .aperture_sizes = intel_i810_sizes, .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 2, - .needs_scratch_page = TRUE, + .needs_scratch_page = true, .configure = intel_i810_configure, .fetch_size = intel_i810_fetch_size, .cleanup = intel_i810_cleanup, @@ -1707,7 +1707,7 @@ static const struct agp_bridge_driver intel_830_driver = { .aperture_sizes = intel_i830_sizes, .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 4, - .needs_scratch_page = TRUE, + .needs_scratch_page = true, .configure = intel_i830_configure, .fetch_size = intel_i830_fetch_size, .cleanup = intel_i830_cleanup, @@ -1878,7 +1878,7 @@ static const struct agp_bridge_driver intel_915_driver = { .aperture_sizes = intel_i830_sizes, .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 4, - .needs_scratch_page = TRUE, + .needs_scratch_page = true, .configure = intel_i915_configure, .fetch_size = intel_i9xx_fetch_size, .cleanup = intel_i915_cleanup, @@ -1904,7 +1904,7 @@ static const struct agp_bridge_driver intel_i965_driver = { .aperture_sizes = intel_i830_sizes, .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 4, - .needs_scratch_page = TRUE, + .needs_scratch_page = true, .configure = intel_i915_configure, .fetch_size = intel_i9xx_fetch_size, .cleanup = intel_i915_cleanup, @@ -1954,7 +1954,7 @@ static const struct agp_bridge_driver intel_g33_driver = { .aperture_sizes = intel_i830_sizes, .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 4, - .needs_scratch_page = TRUE, + .needs_scratch_page = true, .configure = intel_i915_configure, .fetch_size = intel_i9xx_fetch_size, .cleanup = intel_i915_cleanup, diff --git a/drivers/char/agp/nvidia-agp.c b/drivers/char/agp/nvidia-agp.c index 225ed2a53d45..eaceb61ba2dc 100644 --- a/drivers/char/agp/nvidia-agp.c +++ b/drivers/char/agp/nvidia-agp.c @@ -214,9 +214,9 @@ static int nvidia_insert_memory(struct agp_memory *mem, off_t pg_start, int type return -EBUSY; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { writel(agp_bridge->driver->mask_memory(agp_bridge, diff --git a/drivers/char/agp/parisc-agp.c b/drivers/char/agp/parisc-agp.c index 2939e3570f9d..8c42dcc5958c 100644 --- a/drivers/char/agp/parisc-agp.c +++ b/drivers/char/agp/parisc-agp.c @@ -141,9 +141,9 @@ parisc_agp_insert_memory(struct agp_memory *mem, off_t pg_start, int type) j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = io_pg_start; i < mem->page_count; i++) { @@ -226,7 +226,7 @@ static const struct agp_bridge_driver parisc_agp_driver = { .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, + .cant_use_aperture = true, }; static int __init diff --git a/drivers/char/agp/sgi-agp.c b/drivers/char/agp/sgi-agp.c index 98cf8abb3e57..b972d83bb1b2 100644 --- a/drivers/char/agp/sgi-agp.c +++ b/drivers/char/agp/sgi-agp.c @@ -182,9 +182,9 @@ static int sgi_tioca_insert_memory(struct agp_memory *mem, off_t pg_start, j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { bridge->driver->cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { @@ -264,8 +264,8 @@ const struct agp_bridge_driver sgi_tioca_driver = { .agp_alloc_page = sgi_tioca_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, - .needs_scratch_page = 0, + .cant_use_aperture = true, + .needs_scratch_page = false, .num_aperture_sizes = 1, }; diff --git a/drivers/char/agp/sworks-agp.c b/drivers/char/agp/sworks-agp.c index e08934e58f32..0e054c134490 100644 --- a/drivers/char/agp/sworks-agp.c +++ b/drivers/char/agp/sworks-agp.c @@ -339,9 +339,9 @@ static int serverworks_insert_memory(struct agp_memory *mem, j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { @@ -412,7 +412,7 @@ static void serverworks_agp_enable(struct agp_bridge_data *bridge, u32 mode) bridge->capndx + PCI_AGP_COMMAND, command); - agp_device_command(command, 0); + agp_device_command(command, false); } static const struct agp_bridge_driver sworks_driver = { diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c index 42c0a600b1ac..d2fa3cfca02a 100644 --- a/drivers/char/agp/uninorth-agp.c +++ b/drivers/char/agp/uninorth-agp.c @@ -281,10 +281,10 @@ static void uninorth_agp_enable(struct agp_bridge_data *bridge, u32 mode) if (uninorth_rev >= 0x30) { /* This is an AGP V3 */ - agp_device_command(command, (status & AGPSTAT_MODE_3_0)); + agp_device_command(command, (status & AGPSTAT_MODE_3_0) != 0); } else { /* AGP V2 */ - agp_device_command(command, 0); + agp_device_command(command, false); } uninorth_tlbflush(NULL); @@ -511,7 +511,7 @@ const struct agp_bridge_driver uninorth_agp_driver = { .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, + .cant_use_aperture = true, }; const struct agp_bridge_driver u3_agp_driver = { @@ -536,8 +536,8 @@ const struct agp_bridge_driver u3_agp_driver = { .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, - .needs_scratch_page = 1, + .cant_use_aperture = true, + .needs_scratch_page = true, }; static struct agp_device_ids uninorth_agp_device_ids[] __devinitdata = { diff --git a/include/linux/agp_backend.h b/include/linux/agp_backend.h index 661d90d6cf7c..09b4478ffacd 100644 --- a/include/linux/agp_backend.h +++ b/include/linux/agp_backend.h @@ -30,14 +30,6 @@ #ifndef _AGP_BACKEND_H #define _AGP_BACKEND_H 1 -#ifndef TRUE -#define TRUE 1 -#endif - -#ifndef FALSE -#define FALSE 0 -#endif - enum chipset_type { NOT_SUPPORTED, SUPPORTED, @@ -57,7 +49,7 @@ struct agp_kern_info { size_t aper_size; int max_memory; /* In pages */ int current_memory; - int cant_use_aperture; + bool cant_use_aperture; unsigned long page_mask; struct vm_operations_struct *vm_ops; }; @@ -83,8 +75,8 @@ struct agp_memory { off_t pg_start; u32 type; u32 physical; - u8 is_bound; - u8 is_flushed; + bool is_bound; + bool is_flushed; u8 vmalloc_flag; }; -- cgit v1.2.3 From d799e083a80b220f3681d7790f11e77d1704022b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 17 Jun 2008 12:46:30 +0900 Subject: ahci: jmb361 has only one port JMB361 has only one port but reports it has two causing longish probe failure on the second one. Quirk it. Reported by Gajo Petrovic in bz 10911. Signed-off-by: Tejun Heo Cc: Gajo Petrovic Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 966ab401e523..29f34d03bd75 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -653,6 +653,14 @@ static void ahci_save_initial_config(struct pci_dev *pdev, cap &= ~HOST_CAP_PMP; } + if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 && + port_map != 1) { + dev_printk(KERN_INFO, &pdev->dev, + "JMB361 has only one port, port_map 0x%x -> 0x%x\n", + port_map, 1); + port_map = 1; + } + /* * Temporary Marvell 6145 hack: PATA port presence * is asserted through the standard AHCI port -- cgit v1.2.3 From 5895ef9a5b746e7cc9ebda50c87fbd11562da0a4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 17 Jun 2008 12:36:26 +0900 Subject: libata: don't check whether to use DMA or not for no data commands There's no reason to check whether to use DMA or not for no data commands. Don't do it. While at it, make local variable using_pio in atapi_xlat() set iff ATAPI_PROT_PIO is going to be used and rename ata_check_atapi_dma() to atapi_check_dma() for consistency. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 4 ++-- drivers/ata/libata-scsi.c | 16 +++++++--------- drivers/ata/libata.h | 2 +- 3 files changed, 10 insertions(+), 12 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index cc816ca623d3..303fc0d2b978 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4297,7 +4297,7 @@ void ata_sg_clean(struct ata_queued_cmd *qc) } /** - * ata_check_atapi_dma - Check whether ATAPI DMA can be supported + * atapi_check_dma - Check whether ATAPI DMA can be supported * @qc: Metadata associated with taskfile to check * * Allow low-level driver to filter ATA PACKET commands, returning @@ -4310,7 +4310,7 @@ void ata_sg_clean(struct ata_queued_cmd *qc) * RETURNS: 0 when ATAPI DMA can be used * nonzero otherwise */ -int ata_check_atapi_dma(struct ata_queued_cmd *qc) +int atapi_check_dma(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 2e6e1622dc6d..57a43649a461 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2343,8 +2343,8 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) { struct scsi_cmnd *scmd = qc->scsicmd; struct ata_device *dev = qc->dev; - int using_pio = (dev->flags & ATA_DFLAG_PIO); int nodata = (scmd->sc_data_direction == DMA_NONE); + int using_pio = !nodata && (dev->flags & ATA_DFLAG_PIO); unsigned int nbytes; memset(qc->cdb, 0, dev->cdb_len); @@ -2362,7 +2362,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) ata_qc_set_pc_nbytes(qc); /* check whether ATAPI DMA is safe */ - if (!using_pio && ata_check_atapi_dma(qc)) + if (!nodata && !using_pio && atapi_check_dma(qc)) using_pio = 1; /* Some controller variants snoop this value for Packet @@ -2402,13 +2402,11 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) qc->tf.lbam = (nbytes & 0xFF); qc->tf.lbah = (nbytes >> 8); - if (using_pio || nodata) { - /* no data, or PIO data xfer */ - if (nodata) - qc->tf.protocol = ATAPI_PROT_NODATA; - else - qc->tf.protocol = ATAPI_PROT_PIO; - } else { + if (nodata) + qc->tf.protocol = ATAPI_PROT_NODATA; + else if (using_pio) + qc->tf.protocol = ATAPI_PROT_PIO; + else { /* DMA data xfer */ qc->tf.protocol = ATAPI_PROT_DMA; qc->tf.feature |= ATAPI_PKT_DMA; diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 4514283937ea..1cf803adbc95 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -106,7 +106,7 @@ extern void ata_sg_clean(struct ata_queued_cmd *qc); extern void ata_qc_free(struct ata_queued_cmd *qc); extern void ata_qc_issue(struct ata_queued_cmd *qc); extern void __ata_qc_complete(struct ata_queued_cmd *qc); -extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); +extern int atapi_check_dma(struct ata_queued_cmd *qc); extern void swap_buf_le16(u16 *buf, unsigned int buf_words); extern void ata_dev_init(struct ata_device *dev); extern void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp); -- cgit v1.2.3 From 3bd0a70ee9cc30ae81b39cb5ecad0fa7bcb4675b Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 18 Jun 2008 12:11:16 -0400 Subject: sata_mv: enable async_notify for 60x1 Rev.C0 and higher The early chipsets cannot safely handle Async Notification (AN), but 6041/6081 chip revision "C0" (and newer) can handle it. So allow AN for "C0" and higher. This enables use of hotplug on PMP ports for the 6041/6081 PCI Rev.9 chips. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 60391e9a84db..75fde48e1a73 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1322,6 +1322,9 @@ static int mv_port_start(struct ata_port *ap) goto out_port_free_dma_mem; memset(pp->crpb, 0, MV_CRPB_Q_SZ); + /* 6041/6081 Rev. "C0" (and newer) are okay with async notify */ + if (hpriv->hp_flags & MV_HP_ERRATA_60X1C0) + ap->flags |= ATA_FLAG_AN; /* * For GEN_I, there's no NCQ, so we only allocate a single sg_tbl. * For later hardware, we need one unique sg_tbl per NCQ tag. -- cgit v1.2.3 From c6112bd86bc8f727bb732a47f2133e0ff12beda9 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 18 Jun 2008 12:13:02 -0400 Subject: sata_mv: warn on PIO with multiple DRQs Chip errata sometimes prevents reliable use of PIO commands which involve more than a single DRQ (data request). In normal operation, libata should not generate such PIO commands (uses DMA instead), but they could be sent in via SG_IO from userspace. A full workaround might be to break up such commands into sequences of single DRQ ones, but that's just way too complex for something that doesn't normally happen in real life. So, allow the attempt (it often works, despite the errata), but log the event for reference when somebody screams. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 75fde48e1a73..28092bc50146 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1595,6 +1595,24 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) if ((qc->tf.protocol != ATA_PROT_DMA) && (qc->tf.protocol != ATA_PROT_NCQ)) { + static int limit_warnings = 10; + /* + * Errata SATA#16, SATA#24: warn if multiple DRQs expected. + * + * Someday, we might implement special polling workarounds + * for these, but it all seems rather unnecessary since we + * normally use only DMA for commands which transfer more + * than a single block of data. + * + * Much of the time, this could just work regardless. + * So for now, just log the incident, and allow the attempt. + */ + if (limit_warnings && (qc->nbytes / qc->sect_size) > 1) { + --limit_warnings; + ata_link_printk(qc->dev->link, KERN_WARNING, DRV_NAME + ": attempting PIO w/multiple DRQ: " + "this may fail due to h/w errata\n"); + } /* * We're about to send a non-EDMA capable command to the * port. Turn off EDMA so there won't be problems accessing -- cgit v1.2.3 From cc18e0fea7907e7a96b7df71b81838d518bc074e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 16 Jun 2008 12:16:26 +0100 Subject: LIBATA: Add HAVE_PATA_PLATFORM to select PATA_PLATFORM driver Add HAVE_PATA_PLATFORM to select the pata platform driver to ensure that we do not end up with a long 'depends on' list when other users of this driver turn up. Signed-off-by: Ben Dooks Signed-off-by: Jeff Garzik --- drivers/ata/Kconfig | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 9bf2986a2788..ae8494944c45 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -651,9 +651,17 @@ config PATA_WINBOND_VLB Support for the Winbond W83759A controller on Vesa Local Bus systems. +config HAVE_PATA_PLATFORM + bool + help + This is an internal configuration node for any machine that + uses pata-platform driver to enable the relevant driver in the + configuration structure without having to submit endless patches + to update the PATA_PLATFORM entry. + config PATA_PLATFORM tristate "Generic platform device PATA support" - depends on EMBEDDED || ARCH_RPC || PPC + depends on EMBEDDED || ARCH_RPC || PPC || HAVE_PATA_PLATFORM help This option enables support for generic directly connected ATA devices commonly found on embedded systems. -- cgit v1.2.3 From 040dee53a724f54d47876674d50184873364f207 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 13 Jun 2008 18:05:02 +0900 Subject: ata_piix: add TECRA M4 to broken suspend list TOSHIBA also used "TECRA M4" in additon to "Tecra M4", add it. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 81b7ae376951..a90ae03f56b2 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1042,6 +1042,13 @@ static int piix_broken_suspend(void) DMI_MATCH(DMI_PRODUCT_NAME, "Tecra M4"), }, }, + { + .ident = "TECRA M4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M4"), + }, + }, { .ident = "TECRA M5", .matches = { -- cgit v1.2.3 From 9516b030b484fc99cf24213caf88df01f99248dd Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Jun 2008 10:42:17 +1000 Subject: agp: more boolean conversions. Signed-off-by: Dave Airlie --- drivers/char/agp/compat_ioctl.c | 2 +- drivers/char/agp/frontend.c | 12 ++++++------ drivers/char/agp/generic.c | 4 ++-- drivers/char/agp/intel-agp.c | 6 +++--- include/linux/agp_backend.h | 2 +- include/linux/agpgart.h | 4 ++-- 6 files changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/char/agp/compat_ioctl.c b/drivers/char/agp/compat_ioctl.c index 39275794fe63..58c57cb2518c 100644 --- a/drivers/char/agp/compat_ioctl.c +++ b/drivers/char/agp/compat_ioctl.c @@ -214,7 +214,7 @@ long compat_agp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ret_val = -EINVAL; goto ioctl_out; } - if ((agp_fe.backend_acquired != TRUE) && + if ((agp_fe.backend_acquired != true) && (cmd != AGPIOC_ACQUIRE32)) { ret_val = -EBUSY; goto ioctl_out; diff --git a/drivers/char/agp/frontend.c b/drivers/char/agp/frontend.c index 857b26227d87..e6cb1ab03e06 100644 --- a/drivers/char/agp/frontend.c +++ b/drivers/char/agp/frontend.c @@ -395,7 +395,7 @@ static int agp_remove_controller(struct agp_controller *controller) if (agp_fe.current_controller == controller) { agp_fe.current_controller = NULL; - agp_fe.backend_acquired = FALSE; + agp_fe.backend_acquired = false; agp_backend_release(agp_bridge); } kfree(controller); @@ -443,7 +443,7 @@ static void agp_controller_release_current(struct agp_controller *controller, } agp_fe.current_controller = NULL; - agp_fe.used_by_controller = FALSE; + agp_fe.used_by_controller = false; agp_backend_release(agp_bridge); } @@ -573,7 +573,7 @@ static int agp_mmap(struct file *file, struct vm_area_struct *vma) mutex_lock(&(agp_fe.agp_mutex)); - if (agp_fe.backend_acquired != TRUE) + if (agp_fe.backend_acquired != true) goto out_eperm; if (!(test_bit(AGP_FF_IS_VALID, &priv->access_flags))) @@ -768,7 +768,7 @@ int agpioc_acquire_wrap(struct agp_file_private *priv) atomic_inc(&agp_bridge->agp_in_use); - agp_fe.backend_acquired = TRUE; + agp_fe.backend_acquired = true; controller = agp_find_controller_by_pid(priv->my_pid); @@ -778,7 +778,7 @@ int agpioc_acquire_wrap(struct agp_file_private *priv) controller = agp_create_controller(priv->my_pid); if (controller == NULL) { - agp_fe.backend_acquired = FALSE; + agp_fe.backend_acquired = false; agp_backend_release(agp_bridge); return -ENOMEM; } @@ -981,7 +981,7 @@ static long agp_ioctl(struct file *file, ret_val = -EINVAL; goto ioctl_out; } - if ((agp_fe.backend_acquired != TRUE) && + if ((agp_fe.backend_acquired != true) && (cmd != AGPIOC_ACQUIRE)) { ret_val = -EBUSY; goto ioctl_out; diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index 3e3625affdd1..564daaa6c7d0 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -96,13 +96,13 @@ EXPORT_SYMBOL(agp_flush_chipset); void agp_alloc_page_array(size_t size, struct agp_memory *mem) { mem->memory = NULL; - mem->vmalloc_flag = 0; + mem->vmalloc_flag = false; if (size <= 2*PAGE_SIZE) mem->memory = kmalloc(size, GFP_KERNEL | __GFP_NORETRY); if (mem->memory == NULL) { mem->memory = vmalloc(size); - mem->vmalloc_flag = 1; + mem->vmalloc_flag = true; } } EXPORT_SYMBOL(agp_alloc_page_array); diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 6800b7e5b6f5..02356595ac1c 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -325,7 +325,7 @@ static int intel_i810_insert_entries(struct agp_memory *mem, off_t pg_start, out: ret = 0; out_err: - mem->is_flushed = 1; + mem->is_flushed = true; return ret; } @@ -795,7 +795,7 @@ static int intel_i830_insert_entries(struct agp_memory *mem, off_t pg_start, out: ret = 0; out_err: - mem->is_flushed = 1; + mem->is_flushed = true; return ret; } @@ -1022,7 +1022,7 @@ static int intel_i915_insert_entries(struct agp_memory *mem, off_t pg_start, out: ret = 0; out_err: - mem->is_flushed = 1; + mem->is_flushed = true; return ret; } diff --git a/include/linux/agp_backend.h b/include/linux/agp_backend.h index 09b4478ffacd..972b12bcfb36 100644 --- a/include/linux/agp_backend.h +++ b/include/linux/agp_backend.h @@ -77,7 +77,7 @@ struct agp_memory { u32 physical; bool is_bound; bool is_flushed; - u8 vmalloc_flag; + bool vmalloc_flag; }; #define AGP_NORMAL_MEMORY 0 diff --git a/include/linux/agpgart.h b/include/linux/agpgart.h index 62aef589eb94..c8fdb6e658e1 100644 --- a/include/linux/agpgart.h +++ b/include/linux/agpgart.h @@ -206,8 +206,8 @@ struct agp_front_data { struct agp_controller *current_controller; struct agp_controller *controllers; struct agp_file_private *file_priv_list; - u8 used_by_controller; - u8 backend_acquired; + bool used_by_controller; + bool backend_acquired; }; #endif /* __KERNEL__ */ -- cgit v1.2.3 From 9a3b103c27a7e3199b917bc3ca219530132afdfc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 18 Jun 2008 20:56:58 -0400 Subject: ahci: sis can't do PMP From: Piter PUNK SiS AHCIs say they can do PMP but can't and fail detection if SRST w/ pmp==15 is used. Turn off PMP support. tj: added patch description, adapted patch to #upstream-fixes and renamed board_ahci_sis to board_ahci_nopmp. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 29f34d03bd75..6a4a2a25d97a 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -90,6 +90,7 @@ enum { board_ahci_mv = 4, board_ahci_sb700 = 5, board_ahci_mcp65 = 6, + board_ahci_nopmp = 7, /* global controller registers */ HOST_CAP = 0x00, /* host capabilities */ @@ -401,6 +402,14 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, + /* board_ahci_nopmp */ + { + AHCI_HFLAGS (AHCI_HFLAG_NO_PMP), + .flags = AHCI_FLAG_COMMON, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, }; static const struct pci_device_id ahci_pci_tbl[] = { @@ -525,9 +534,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */ /* SiS */ - { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */ - { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 966 */ - { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */ + { PCI_VDEVICE(SI, 0x1184), board_ahci_nopmp }, /* SiS 966 */ + { PCI_VDEVICE(SI, 0x1185), board_ahci_nopmp }, /* SiS 968 */ + { PCI_VDEVICE(SI, 0x0186), board_ahci_nopmp }, /* SiS 968 */ /* Marvell */ { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */ -- cgit v1.2.3 From 7ec700fcaf4f01ae72956df74a9e0d08938fd26e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Jun 2008 11:27:23 +1000 Subject: drm: pcigart use proper pci map interfaces. Switch to using more correct pci dma mapping interfaces. Signed-off-by: Dave Airlie --- drivers/char/drm/ati_pcigart.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/char/drm/ati_pcigart.c b/drivers/char/drm/ati_pcigart.c index b710426bab3e..c533d0c9ec61 100644 --- a/drivers/char/drm/ati_pcigart.c +++ b/drivers/char/drm/ati_pcigart.c @@ -76,7 +76,7 @@ int drm_ati_pcigart_cleanup(struct drm_device *dev, struct drm_ati_pcigart_info for (i = 0; i < pages; i++) { if (!entry->busaddr[i]) break; - pci_unmap_single(dev->pdev, entry->busaddr[i], + pci_unmap_page(dev->pdev, entry->busaddr[i], PAGE_SIZE, PCI_DMA_TODEVICE); } @@ -137,10 +137,8 @@ int drm_ati_pcigart_init(struct drm_device *dev, struct drm_ati_pcigart_info *ga for (i = 0; i < pages; i++) { /* we need to support large memory configurations */ - entry->busaddr[i] = pci_map_single(dev->pdev, - page_address(entry-> - pagelist[i]), - PAGE_SIZE, PCI_DMA_TODEVICE); + entry->busaddr[i] = pci_map_page(dev->pdev, entry->pagelist[i], + 0, PAGE_SIZE, PCI_DMA_TODEVICE); if (entry->busaddr[i] == 0) { DRM_ERROR("unable to map PCIGART pages!\n"); drm_ati_pcigart_cleanup(dev, gart_info); -- cgit v1.2.3 From 9f18409ea3d778a171a9505c0a849d846f352bd0 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 May 2008 11:21:25 +1000 Subject: radeon: add production microcode from AMD This adds production microcode for r100->r500 from AMD. Signed-off-by: Dave Airlie --- drivers/char/drm/radeon_cp.c | 833 +--------------- drivers/char/drm/radeon_microcode.h | 1844 +++++++++++++++++++++++++++++++++++ 2 files changed, 1893 insertions(+), 784 deletions(-) create mode 100644 drivers/char/drm/radeon_microcode.h diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index f6f6c92bf771..d8ede40de0b0 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -34,788 +34,12 @@ #include "radeon_drv.h" #include "r300_reg.h" +#include "radeon_microcode.h" + #define RADEON_FIFO_DEBUG 0 static int radeon_do_cleanup_cp(struct drm_device * dev); -/* CP microcode (from ATI) */ -static const u32 R200_cp_microcode[][2] = { - {0x21007000, 0000000000}, - {0x20007000, 0000000000}, - {0x000000ab, 0x00000004}, - {0x000000af, 0x00000004}, - {0x66544a49, 0000000000}, - {0x49494174, 0000000000}, - {0x54517d83, 0000000000}, - {0x498d8b64, 0000000000}, - {0x49494949, 0000000000}, - {0x49da493c, 0000000000}, - {0x49989898, 0000000000}, - {0xd34949d5, 0000000000}, - {0x9dc90e11, 0000000000}, - {0xce9b9b9b, 0000000000}, - {0x000f0000, 0x00000016}, - {0x352e232c, 0000000000}, - {0x00000013, 0x00000004}, - {0x000f0000, 0x00000016}, - {0x352e272c, 0000000000}, - {0x000f0001, 0x00000016}, - {0x3239362f, 0000000000}, - {0x000077ef, 0x00000002}, - {0x00061000, 0x00000002}, - {0x00000020, 0x0000001a}, - {0x00004000, 0x0000001e}, - {0x00061000, 0x00000002}, - {0x00000020, 0x0000001a}, - {0x00004000, 0x0000001e}, - {0x00061000, 0x00000002}, - {0x00000020, 0x0000001a}, - {0x00004000, 0x0000001e}, - {0x00000016, 0x00000004}, - {0x0003802a, 0x00000002}, - {0x040067e0, 0x00000002}, - {0x00000016, 0x00000004}, - {0x000077e0, 0x00000002}, - {0x00065000, 0x00000002}, - {0x000037e1, 0x00000002}, - {0x040067e1, 0x00000006}, - {0x000077e0, 0x00000002}, - {0x000077e1, 0x00000002}, - {0x000077e1, 0x00000006}, - {0xffffffff, 0000000000}, - {0x10000000, 0000000000}, - {0x0003802a, 0x00000002}, - {0x040067e0, 0x00000006}, - {0x00007675, 0x00000002}, - {0x00007676, 0x00000002}, - {0x00007677, 0x00000002}, - {0x00007678, 0x00000006}, - {0x0003802b, 0x00000002}, - {0x04002676, 0x00000002}, - {0x00007677, 0x00000002}, - {0x00007678, 0x00000006}, - {0x0000002e, 0x00000018}, - {0x0000002e, 0x00000018}, - {0000000000, 0x00000006}, - {0x0000002f, 0x00000018}, - {0x0000002f, 0x00000018}, - {0000000000, 0x00000006}, - {0x01605000, 0x00000002}, - {0x00065000, 0x00000002}, - {0x00098000, 0x00000002}, - {0x00061000, 0x00000002}, - {0x64c0603d, 0x00000004}, - {0x00080000, 0x00000016}, - {0000000000, 0000000000}, - {0x0400251d, 0x00000002}, - {0x00007580, 0x00000002}, - {0x00067581, 0x00000002}, - {0x04002580, 0x00000002}, - {0x00067581, 0x00000002}, - {0x00000046, 0x00000004}, - {0x00005000, 0000000000}, - {0x00061000, 0x00000002}, - {0x0000750e, 0x00000002}, - {0x00019000, 0x00000002}, - {0x00011055, 0x00000014}, - {0x00000055, 0x00000012}, - {0x0400250f, 0x00000002}, - {0x0000504a, 0x00000004}, - {0x00007565, 0x00000002}, - {0x00007566, 0x00000002}, - {0x00000051, 0x00000004}, - {0x01e655b4, 0x00000002}, - {0x4401b0dc, 0x00000002}, - {0x01c110dc, 0x00000002}, - {0x2666705d, 0x00000018}, - {0x040c2565, 0x00000002}, - {0x0000005d, 0x00000018}, - {0x04002564, 0x00000002}, - {0x00007566, 0x00000002}, - {0x00000054, 0x00000004}, - {0x00401060, 0x00000008}, - {0x00101000, 0x00000002}, - {0x000d80ff, 0x00000002}, - {0x00800063, 0x00000008}, - {0x000f9000, 0x00000002}, - {0x000e00ff, 0x00000002}, - {0000000000, 0x00000006}, - {0x00000080, 0x00000018}, - {0x00000054, 0x00000004}, - {0x00007576, 0x00000002}, - {0x00065000, 0x00000002}, - {0x00009000, 0x00000002}, - {0x00041000, 0x00000002}, - {0x0c00350e, 0x00000002}, - {0x00049000, 0x00000002}, - {0x00051000, 0x00000002}, - {0x01e785f8, 0x00000002}, - {0x00200000, 0x00000002}, - {0x00600073, 0x0000000c}, - {0x00007563, 0x00000002}, - {0x006075f0, 0x00000021}, - {0x20007068, 0x00000004}, - {0x00005068, 0x00000004}, - {0x00007576, 0x00000002}, - {0x00007577, 0x00000002}, - {0x0000750e, 0x00000002}, - {0x0000750f, 0x00000002}, - {0x00a05000, 0x00000002}, - {0x00600076, 0x0000000c}, - {0x006075f0, 0x00000021}, - {0x000075f8, 0x00000002}, - {0x00000076, 0x00000004}, - {0x000a750e, 0x00000002}, - {0x0020750f, 0x00000002}, - {0x00600079, 0x00000004}, - {0x00007570, 0x00000002}, - {0x00007571, 0x00000002}, - {0x00007572, 0x00000006}, - {0x00005000, 0x00000002}, - {0x00a05000, 0x00000002}, - {0x00007568, 0x00000002}, - {0x00061000, 0x00000002}, - {0x00000084, 0x0000000c}, - {0x00058000, 0x00000002}, - {0x0c607562, 0x00000002}, - {0x00000086, 0x00000004}, - {0x00600085, 0x00000004}, - {0x400070dd, 0000000000}, - {0x000380dd, 0x00000002}, - {0x00000093, 0x0000001c}, - {0x00065095, 0x00000018}, - {0x040025bb, 0x00000002}, - {0x00061096, 0x00000018}, - {0x040075bc, 0000000000}, - {0x000075bb, 0x00000002}, - {0x000075bc, 0000000000}, - {0x00090000, 0x00000006}, - {0x00090000, 0x00000002}, - {0x000d8002, 0x00000006}, - {0x00005000, 0x00000002}, - {0x00007821, 0x00000002}, - {0x00007800, 0000000000}, - {0x00007821, 0x00000002}, - {0x00007800, 0000000000}, - {0x01665000, 0x00000002}, - {0x000a0000, 0x00000002}, - {0x000671cc, 0x00000002}, - {0x0286f1cd, 0x00000002}, - {0x000000a3, 0x00000010}, - {0x21007000, 0000000000}, - {0x000000aa, 0x0000001c}, - {0x00065000, 0x00000002}, - {0x000a0000, 0x00000002}, - {0x00061000, 0x00000002}, - {0x000b0000, 0x00000002}, - {0x38067000, 0x00000002}, - {0x000a00a6, 0x00000004}, - {0x20007000, 0000000000}, - {0x01200000, 0x00000002}, - {0x20077000, 0x00000002}, - {0x01200000, 0x00000002}, - {0x20007000, 0000000000}, - {0x00061000, 0x00000002}, - {0x0120751b, 0x00000002}, - {0x8040750a, 0x00000002}, - {0x8040750b, 0x00000002}, - {0x00110000, 0x00000002}, - {0x000380dd, 0x00000002}, - {0x000000bd, 0x0000001c}, - {0x00061096, 0x00000018}, - {0x844075bd, 0x00000002}, - {0x00061095, 0x00000018}, - {0x840075bb, 0x00000002}, - {0x00061096, 0x00000018}, - {0x844075bc, 0x00000002}, - {0x000000c0, 0x00000004}, - {0x804075bd, 0x00000002}, - {0x800075bb, 0x00000002}, - {0x804075bc, 0x00000002}, - {0x00108000, 0x00000002}, - {0x01400000, 0x00000002}, - {0x006000c4, 0x0000000c}, - {0x20c07000, 0x00000020}, - {0x000000c6, 0x00000012}, - {0x00800000, 0x00000006}, - {0x0080751d, 0x00000006}, - {0x000025bb, 0x00000002}, - {0x000040c0, 0x00000004}, - {0x0000775c, 0x00000002}, - {0x00a05000, 0x00000002}, - {0x00661000, 0x00000002}, - {0x0460275d, 0x00000020}, - {0x00004000, 0000000000}, - {0x00007999, 0x00000002}, - {0x00a05000, 0x00000002}, - {0x00661000, 0x00000002}, - {0x0460299b, 0x00000020}, - {0x00004000, 0000000000}, - {0x01e00830, 0x00000002}, - {0x21007000, 0000000000}, - {0x00005000, 0x00000002}, - {0x00038042, 0x00000002}, - {0x040025e0, 0x00000002}, - {0x000075e1, 0000000000}, - {0x00000001, 0000000000}, - {0x000380d9, 0x00000002}, - {0x04007394, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, -}; - -static const u32 radeon_cp_microcode[][2] = { - {0x21007000, 0000000000}, - {0x20007000, 0000000000}, - {0x000000b4, 0x00000004}, - {0x000000b8, 0x00000004}, - {0x6f5b4d4c, 0000000000}, - {0x4c4c427f, 0000000000}, - {0x5b568a92, 0000000000}, - {0x4ca09c6d, 0000000000}, - {0xad4c4c4c, 0000000000}, - {0x4ce1af3d, 0000000000}, - {0xd8afafaf, 0000000000}, - {0xd64c4cdc, 0000000000}, - {0x4cd10d10, 0000000000}, - {0x000f0000, 0x00000016}, - {0x362f242d, 0000000000}, - {0x00000012, 0x00000004}, - {0x000f0000, 0x00000016}, - {0x362f282d, 0000000000}, - {0x000380e7, 0x00000002}, - {0x04002c97, 0x00000002}, - {0x000f0001, 0x00000016}, - {0x333a3730, 0000000000}, - {0x000077ef, 0x00000002}, - {0x00061000, 0x00000002}, - {0x00000021, 0x0000001a}, - {0x00004000, 0x0000001e}, - {0x00061000, 0x00000002}, - {0x00000021, 0x0000001a}, - {0x00004000, 0x0000001e}, - {0x00061000, 0x00000002}, - {0x00000021, 0x0000001a}, - {0x00004000, 0x0000001e}, - {0x00000017, 0x00000004}, - {0x0003802b, 0x00000002}, - {0x040067e0, 0x00000002}, - {0x00000017, 0x00000004}, - {0x000077e0, 0x00000002}, - {0x00065000, 0x00000002}, - {0x000037e1, 0x00000002}, - {0x040067e1, 0x00000006}, - {0x000077e0, 0x00000002}, - {0x000077e1, 0x00000002}, - {0x000077e1, 0x00000006}, - {0xffffffff, 0000000000}, - {0x10000000, 0000000000}, - {0x0003802b, 0x00000002}, - {0x040067e0, 0x00000006}, - {0x00007675, 0x00000002}, - {0x00007676, 0x00000002}, - {0x00007677, 0x00000002}, - {0x00007678, 0x00000006}, - {0x0003802c, 0x00000002}, - {0x04002676, 0x00000002}, - {0x00007677, 0x00000002}, - {0x00007678, 0x00000006}, - {0x0000002f, 0x00000018}, - {0x0000002f, 0x00000018}, - {0000000000, 0x00000006}, - {0x00000030, 0x00000018}, - {0x00000030, 0x00000018}, - {0000000000, 0x00000006}, - {0x01605000, 0x00000002}, - {0x00065000, 0x00000002}, - {0x00098000, 0x00000002}, - {0x00061000, 0x00000002}, - {0x64c0603e, 0x00000004}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x00080000, 0x00000016}, - {0000000000, 0000000000}, - {0x0400251d, 0x00000002}, - {0x00007580, 0x00000002}, - {0x00067581, 0x00000002}, - {0x04002580, 0x00000002}, - {0x00067581, 0x00000002}, - {0x00000049, 0x00000004}, - {0x00005000, 0000000000}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x00061000, 0x00000002}, - {0x0000750e, 0x00000002}, - {0x00019000, 0x00000002}, - {0x00011055, 0x00000014}, - {0x00000055, 0x00000012}, - {0x0400250f, 0x00000002}, - {0x0000504f, 0x00000004}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x00007565, 0x00000002}, - {0x00007566, 0x00000002}, - {0x00000058, 0x00000004}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x01e655b4, 0x00000002}, - {0x4401b0e4, 0x00000002}, - {0x01c110e4, 0x00000002}, - {0x26667066, 0x00000018}, - {0x040c2565, 0x00000002}, - {0x00000066, 0x00000018}, - {0x04002564, 0x00000002}, - {0x00007566, 0x00000002}, - {0x0000005d, 0x00000004}, - {0x00401069, 0x00000008}, - {0x00101000, 0x00000002}, - {0x000d80ff, 0x00000002}, - {0x0080006c, 0x00000008}, - {0x000f9000, 0x00000002}, - {0x000e00ff, 0x00000002}, - {0000000000, 0x00000006}, - {0x0000008f, 0x00000018}, - {0x0000005b, 0x00000004}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x00007576, 0x00000002}, - {0x00065000, 0x00000002}, - {0x00009000, 0x00000002}, - {0x00041000, 0x00000002}, - {0x0c00350e, 0x00000002}, - {0x00049000, 0x00000002}, - {0x00051000, 0x00000002}, - {0x01e785f8, 0x00000002}, - {0x00200000, 0x00000002}, - {0x0060007e, 0x0000000c}, - {0x00007563, 0x00000002}, - {0x006075f0, 0x00000021}, - {0x20007073, 0x00000004}, - {0x00005073, 0x00000004}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x00007576, 0x00000002}, - {0x00007577, 0x00000002}, - {0x0000750e, 0x00000002}, - {0x0000750f, 0x00000002}, - {0x00a05000, 0x00000002}, - {0x00600083, 0x0000000c}, - {0x006075f0, 0x00000021}, - {0x000075f8, 0x00000002}, - {0x00000083, 0x00000004}, - {0x000a750e, 0x00000002}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x0020750f, 0x00000002}, - {0x00600086, 0x00000004}, - {0x00007570, 0x00000002}, - {0x00007571, 0x00000002}, - {0x00007572, 0x00000006}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x00005000, 0x00000002}, - {0x00a05000, 0x00000002}, - {0x00007568, 0x00000002}, - {0x00061000, 0x00000002}, - {0x00000095, 0x0000000c}, - {0x00058000, 0x00000002}, - {0x0c607562, 0x00000002}, - {0x00000097, 0x00000004}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x00600096, 0x00000004}, - {0x400070e5, 0000000000}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x000380e5, 0x00000002}, - {0x000000a8, 0x0000001c}, - {0x000650aa, 0x00000018}, - {0x040025bb, 0x00000002}, - {0x000610ab, 0x00000018}, - {0x040075bc, 0000000000}, - {0x000075bb, 0x00000002}, - {0x000075bc, 0000000000}, - {0x00090000, 0x00000006}, - {0x00090000, 0x00000002}, - {0x000d8002, 0x00000006}, - {0x00007832, 0x00000002}, - {0x00005000, 0x00000002}, - {0x000380e7, 0x00000002}, - {0x04002c97, 0x00000002}, - {0x00007820, 0x00000002}, - {0x00007821, 0x00000002}, - {0x00007800, 0000000000}, - {0x01200000, 0x00000002}, - {0x20077000, 0x00000002}, - {0x01200000, 0x00000002}, - {0x20007000, 0x00000002}, - {0x00061000, 0x00000002}, - {0x0120751b, 0x00000002}, - {0x8040750a, 0x00000002}, - {0x8040750b, 0x00000002}, - {0x00110000, 0x00000002}, - {0x000380e5, 0x00000002}, - {0x000000c6, 0x0000001c}, - {0x000610ab, 0x00000018}, - {0x844075bd, 0x00000002}, - {0x000610aa, 0x00000018}, - {0x840075bb, 0x00000002}, - {0x000610ab, 0x00000018}, - {0x844075bc, 0x00000002}, - {0x000000c9, 0x00000004}, - {0x804075bd, 0x00000002}, - {0x800075bb, 0x00000002}, - {0x804075bc, 0x00000002}, - {0x00108000, 0x00000002}, - {0x01400000, 0x00000002}, - {0x006000cd, 0x0000000c}, - {0x20c07000, 0x00000020}, - {0x000000cf, 0x00000012}, - {0x00800000, 0x00000006}, - {0x0080751d, 0x00000006}, - {0000000000, 0000000000}, - {0x0000775c, 0x00000002}, - {0x00a05000, 0x00000002}, - {0x00661000, 0x00000002}, - {0x0460275d, 0x00000020}, - {0x00004000, 0000000000}, - {0x01e00830, 0x00000002}, - {0x21007000, 0000000000}, - {0x6464614d, 0000000000}, - {0x69687420, 0000000000}, - {0x00000073, 0000000000}, - {0000000000, 0000000000}, - {0x00005000, 0x00000002}, - {0x000380d0, 0x00000002}, - {0x040025e0, 0x00000002}, - {0x000075e1, 0000000000}, - {0x00000001, 0000000000}, - {0x000380e0, 0x00000002}, - {0x04002394, 0x00000002}, - {0x00005000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0x00000008, 0000000000}, - {0x00000004, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, -}; - -static const u32 R300_cp_microcode[][2] = { - {0x4200e000, 0000000000}, - {0x4000e000, 0000000000}, - {0x000000af, 0x00000008}, - {0x000000b3, 0x00000008}, - {0x6c5a504f, 0000000000}, - {0x4f4f497a, 0000000000}, - {0x5a578288, 0000000000}, - {0x4f91906a, 0000000000}, - {0x4f4f4f4f, 0000000000}, - {0x4fe24f44, 0000000000}, - {0x4f9c9c9c, 0000000000}, - {0xdc4f4fde, 0000000000}, - {0xa1cd4f4f, 0000000000}, - {0xd29d9d9d, 0000000000}, - {0x4f0f9fd7, 0000000000}, - {0x000ca000, 0x00000004}, - {0x000d0012, 0x00000038}, - {0x0000e8b4, 0x00000004}, - {0x000d0014, 0x00000038}, - {0x0000e8b6, 0x00000004}, - {0x000d0016, 0x00000038}, - {0x0000e854, 0x00000004}, - {0x000d0018, 0x00000038}, - {0x0000e855, 0x00000004}, - {0x000d001a, 0x00000038}, - {0x0000e856, 0x00000004}, - {0x000d001c, 0x00000038}, - {0x0000e857, 0x00000004}, - {0x000d001e, 0x00000038}, - {0x0000e824, 0x00000004}, - {0x000d0020, 0x00000038}, - {0x0000e825, 0x00000004}, - {0x000d0022, 0x00000038}, - {0x0000e830, 0x00000004}, - {0x000d0024, 0x00000038}, - {0x0000f0c0, 0x00000004}, - {0x000d0026, 0x00000038}, - {0x0000f0c1, 0x00000004}, - {0x000d0028, 0x00000038}, - {0x0000f041, 0x00000004}, - {0x000d002a, 0x00000038}, - {0x0000f184, 0x00000004}, - {0x000d002c, 0x00000038}, - {0x0000f185, 0x00000004}, - {0x000d002e, 0x00000038}, - {0x0000f186, 0x00000004}, - {0x000d0030, 0x00000038}, - {0x0000f187, 0x00000004}, - {0x000d0032, 0x00000038}, - {0x0000f180, 0x00000004}, - {0x000d0034, 0x00000038}, - {0x0000f393, 0x00000004}, - {0x000d0036, 0x00000038}, - {0x0000f38a, 0x00000004}, - {0x000d0038, 0x00000038}, - {0x0000f38e, 0x00000004}, - {0x0000e821, 0x00000004}, - {0x0140a000, 0x00000004}, - {0x00000043, 0x00000018}, - {0x00cce800, 0x00000004}, - {0x001b0001, 0x00000004}, - {0x08004800, 0x00000004}, - {0x001b0001, 0x00000004}, - {0x08004800, 0x00000004}, - {0x001b0001, 0x00000004}, - {0x08004800, 0x00000004}, - {0x0000003a, 0x00000008}, - {0x0000a000, 0000000000}, - {0x02c0a000, 0x00000004}, - {0x000ca000, 0x00000004}, - {0x00130000, 0x00000004}, - {0x000c2000, 0x00000004}, - {0xc980c045, 0x00000008}, - {0x2000451d, 0x00000004}, - {0x0000e580, 0x00000004}, - {0x000ce581, 0x00000004}, - {0x08004580, 0x00000004}, - {0x000ce581, 0x00000004}, - {0x0000004c, 0x00000008}, - {0x0000a000, 0000000000}, - {0x000c2000, 0x00000004}, - {0x0000e50e, 0x00000004}, - {0x00032000, 0x00000004}, - {0x00022056, 0x00000028}, - {0x00000056, 0x00000024}, - {0x0800450f, 0x00000004}, - {0x0000a050, 0x00000008}, - {0x0000e565, 0x00000004}, - {0x0000e566, 0x00000004}, - {0x00000057, 0x00000008}, - {0x03cca5b4, 0x00000004}, - {0x05432000, 0x00000004}, - {0x00022000, 0x00000004}, - {0x4ccce063, 0x00000030}, - {0x08274565, 0x00000004}, - {0x00000063, 0x00000030}, - {0x08004564, 0x00000004}, - {0x0000e566, 0x00000004}, - {0x0000005a, 0x00000008}, - {0x00802066, 0x00000010}, - {0x00202000, 0x00000004}, - {0x001b00ff, 0x00000004}, - {0x01000069, 0x00000010}, - {0x001f2000, 0x00000004}, - {0x001c00ff, 0x00000004}, - {0000000000, 0x0000000c}, - {0x00000085, 0x00000030}, - {0x0000005a, 0x00000008}, - {0x0000e576, 0x00000004}, - {0x000ca000, 0x00000004}, - {0x00012000, 0x00000004}, - {0x00082000, 0x00000004}, - {0x1800650e, 0x00000004}, - {0x00092000, 0x00000004}, - {0x000a2000, 0x00000004}, - {0x000f0000, 0x00000004}, - {0x00400000, 0x00000004}, - {0x00000079, 0x00000018}, - {0x0000e563, 0x00000004}, - {0x00c0e5f9, 0x000000c2}, - {0x0000006e, 0x00000008}, - {0x0000a06e, 0x00000008}, - {0x0000e576, 0x00000004}, - {0x0000e577, 0x00000004}, - {0x0000e50e, 0x00000004}, - {0x0000e50f, 0x00000004}, - {0x0140a000, 0x00000004}, - {0x0000007c, 0x00000018}, - {0x00c0e5f9, 0x000000c2}, - {0x0000007c, 0x00000008}, - {0x0014e50e, 0x00000004}, - {0x0040e50f, 0x00000004}, - {0x00c0007f, 0x00000008}, - {0x0000e570, 0x00000004}, - {0x0000e571, 0x00000004}, - {0x0000e572, 0x0000000c}, - {0x0000a000, 0x00000004}, - {0x0140a000, 0x00000004}, - {0x0000e568, 0x00000004}, - {0x000c2000, 0x00000004}, - {0x00000089, 0x00000018}, - {0x000b0000, 0x00000004}, - {0x18c0e562, 0x00000004}, - {0x0000008b, 0x00000008}, - {0x00c0008a, 0x00000008}, - {0x000700e4, 0x00000004}, - {0x00000097, 0x00000038}, - {0x000ca099, 0x00000030}, - {0x080045bb, 0x00000004}, - {0x000c209a, 0x00000030}, - {0x0800e5bc, 0000000000}, - {0x0000e5bb, 0x00000004}, - {0x0000e5bc, 0000000000}, - {0x00120000, 0x0000000c}, - {0x00120000, 0x00000004}, - {0x001b0002, 0x0000000c}, - {0x0000a000, 0x00000004}, - {0x0000e821, 0x00000004}, - {0x0000e800, 0000000000}, - {0x0000e821, 0x00000004}, - {0x0000e82e, 0000000000}, - {0x02cca000, 0x00000004}, - {0x00140000, 0x00000004}, - {0x000ce1cc, 0x00000004}, - {0x050de1cd, 0x00000004}, - {0x000000a7, 0x00000020}, - {0x4200e000, 0000000000}, - {0x000000ae, 0x00000038}, - {0x000ca000, 0x00000004}, - {0x00140000, 0x00000004}, - {0x000c2000, 0x00000004}, - {0x00160000, 0x00000004}, - {0x700ce000, 0x00000004}, - {0x001400aa, 0x00000008}, - {0x4000e000, 0000000000}, - {0x02400000, 0x00000004}, - {0x400ee000, 0x00000004}, - {0x02400000, 0x00000004}, - {0x4000e000, 0000000000}, - {0x000c2000, 0x00000004}, - {0x0240e51b, 0x00000004}, - {0x0080e50a, 0x00000005}, - {0x0080e50b, 0x00000005}, - {0x00220000, 0x00000004}, - {0x000700e4, 0x00000004}, - {0x000000c1, 0x00000038}, - {0x000c209a, 0x00000030}, - {0x0880e5bd, 0x00000005}, - {0x000c2099, 0x00000030}, - {0x0800e5bb, 0x00000005}, - {0x000c209a, 0x00000030}, - {0x0880e5bc, 0x00000005}, - {0x000000c4, 0x00000008}, - {0x0080e5bd, 0x00000005}, - {0x0000e5bb, 0x00000005}, - {0x0080e5bc, 0x00000005}, - {0x00210000, 0x00000004}, - {0x02800000, 0x00000004}, - {0x00c000c8, 0x00000018}, - {0x4180e000, 0x00000040}, - {0x000000ca, 0x00000024}, - {0x01000000, 0x0000000c}, - {0x0100e51d, 0x0000000c}, - {0x000045bb, 0x00000004}, - {0x000080c4, 0x00000008}, - {0x0000f3ce, 0x00000004}, - {0x0140a000, 0x00000004}, - {0x00cc2000, 0x00000004}, - {0x08c053cf, 0x00000040}, - {0x00008000, 0000000000}, - {0x0000f3d2, 0x00000004}, - {0x0140a000, 0x00000004}, - {0x00cc2000, 0x00000004}, - {0x08c053d3, 0x00000040}, - {0x00008000, 0000000000}, - {0x0000f39d, 0x00000004}, - {0x0140a000, 0x00000004}, - {0x00cc2000, 0x00000004}, - {0x08c0539e, 0x00000040}, - {0x00008000, 0000000000}, - {0x03c00830, 0x00000004}, - {0x4200e000, 0000000000}, - {0x0000a000, 0x00000004}, - {0x200045e0, 0x00000004}, - {0x0000e5e1, 0000000000}, - {0x00000001, 0000000000}, - {0x000700e1, 0x00000004}, - {0x0800e394, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, -}; - static u32 RADEON_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) { u32 ret; @@ -1004,8 +228,22 @@ static void radeon_cp_load_microcode(drm_radeon_private_t * dev_priv) radeon_do_wait_for_idle(dev_priv); RADEON_WRITE(RADEON_CP_ME_RAM_ADDR, 0); - - if (dev_priv->microcode_version == UCODE_R200) { + if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R100) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV100) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV200) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS100) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS200)) { + DRM_INFO("Loading R100 Microcode\n"); + for (i = 0; i < 256; i++) { + RADEON_WRITE(RADEON_CP_ME_RAM_DATAH, + R100_cp_microcode[i][1]); + RADEON_WRITE(RADEON_CP_ME_RAM_DATAL, + R100_cp_microcode[i][0]); + } + } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R200) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV250) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV280) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS300)) { DRM_INFO("Loading R200 Microcode\n"); for (i = 0; i < 256; i++) { RADEON_WRITE(RADEON_CP_ME_RAM_DATAH, @@ -1013,7 +251,11 @@ static void radeon_cp_load_microcode(drm_radeon_private_t * dev_priv) RADEON_WRITE(RADEON_CP_ME_RAM_DATAL, R200_cp_microcode[i][0]); } - } else if (dev_priv->microcode_version == UCODE_R300) { + } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R300) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R350) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV350) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV380) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS400)) { DRM_INFO("Loading R300 Microcode\n"); for (i = 0; i < 256; i++) { RADEON_WRITE(RADEON_CP_ME_RAM_DATAH, @@ -1021,12 +263,35 @@ static void radeon_cp_load_microcode(drm_radeon_private_t * dev_priv) RADEON_WRITE(RADEON_CP_ME_RAM_DATAL, R300_cp_microcode[i][0]); } - } else { + } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R420) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV410)) { + DRM_INFO("Loading R400 Microcode\n"); + for (i = 0; i < 256; i++) { + RADEON_WRITE(RADEON_CP_ME_RAM_DATAH, + R420_cp_microcode[i][1]); + RADEON_WRITE(RADEON_CP_ME_RAM_DATAL, + R420_cp_microcode[i][0]); + } + } else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) { + DRM_INFO("Loading RS690 Microcode\n"); + for (i = 0; i < 256; i++) { + RADEON_WRITE(RADEON_CP_ME_RAM_DATAH, + RS690_cp_microcode[i][1]); + RADEON_WRITE(RADEON_CP_ME_RAM_DATAL, + RS690_cp_microcode[i][0]); + } + } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R520) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV530) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R580) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV560) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV570)) { + DRM_INFO("Loading R500 Microcode\n"); for (i = 0; i < 256; i++) { RADEON_WRITE(RADEON_CP_ME_RAM_DATAH, - radeon_cp_microcode[i][1]); + R520_cp_microcode[i][1]); RADEON_WRITE(RADEON_CP_ME_RAM_DATAL, - radeon_cp_microcode[i][0]); + R520_cp_microcode[i][0]); } } } diff --git a/drivers/char/drm/radeon_microcode.h b/drivers/char/drm/radeon_microcode.h new file mode 100644 index 000000000000..a348c9e7db1c --- /dev/null +++ b/drivers/char/drm/radeon_microcode.h @@ -0,0 +1,1844 @@ +/* + * Copyright 2007 Advanced Micro Devices, Inc. + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE + * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION + * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION + * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + */ + +#ifndef RADEON_MICROCODE_H +#define RADEON_MICROCODE_H + +/* production radeon ucode r1xx-r6xx */ +static const u32 R100_cp_microcode[][2] = { + { 0x21007000, 0000000000 }, + { 0x20007000, 0000000000 }, + { 0x000000b4, 0x00000004 }, + { 0x000000b8, 0x00000004 }, + { 0x6f5b4d4c, 0000000000 }, + { 0x4c4c427f, 0000000000 }, + { 0x5b568a92, 0000000000 }, + { 0x4ca09c6d, 0000000000 }, + { 0xad4c4c4c, 0000000000 }, + { 0x4ce1af3d, 0000000000 }, + { 0xd8afafaf, 0000000000 }, + { 0xd64c4cdc, 0000000000 }, + { 0x4cd10d10, 0000000000 }, + { 0x000f0000, 0x00000016 }, + { 0x362f242d, 0000000000 }, + { 0x00000012, 0x00000004 }, + { 0x000f0000, 0x00000016 }, + { 0x362f282d, 0000000000 }, + { 0x000380e7, 0x00000002 }, + { 0x04002c97, 0x00000002 }, + { 0x000f0001, 0x00000016 }, + { 0x333a3730, 0000000000 }, + { 0x000077ef, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x00000021, 0x0000001a }, + { 0x00004000, 0x0000001e }, + { 0x00061000, 0x00000002 }, + { 0x00000021, 0x0000001a }, + { 0x00004000, 0x0000001e }, + { 0x00061000, 0x00000002 }, + { 0x00000021, 0x0000001a }, + { 0x00004000, 0x0000001e }, + { 0x00000017, 0x00000004 }, + { 0x0003802b, 0x00000002 }, + { 0x040067e0, 0x00000002 }, + { 0x00000017, 0x00000004 }, + { 0x000077e0, 0x00000002 }, + { 0x00065000, 0x00000002 }, + { 0x000037e1, 0x00000002 }, + { 0x040067e1, 0x00000006 }, + { 0x000077e0, 0x00000002 }, + { 0x000077e1, 0x00000002 }, + { 0x000077e1, 0x00000006 }, + { 0xffffffff, 0000000000 }, + { 0x10000000, 0000000000 }, + { 0x0003802b, 0x00000002 }, + { 0x040067e0, 0x00000006 }, + { 0x00007675, 0x00000002 }, + { 0x00007676, 0x00000002 }, + { 0x00007677, 0x00000002 }, + { 0x00007678, 0x00000006 }, + { 0x0003802c, 0x00000002 }, + { 0x04002676, 0x00000002 }, + { 0x00007677, 0x00000002 }, + { 0x00007678, 0x00000006 }, + { 0x0000002f, 0x00000018 }, + { 0x0000002f, 0x00000018 }, + { 0000000000, 0x00000006 }, + { 0x00000030, 0x00000018 }, + { 0x00000030, 0x00000018 }, + { 0000000000, 0x00000006 }, + { 0x01605000, 0x00000002 }, + { 0x00065000, 0x00000002 }, + { 0x00098000, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x64c0603e, 0x00000004 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x00080000, 0x00000016 }, + { 0000000000, 0000000000 }, + { 0x0400251d, 0x00000002 }, + { 0x00007580, 0x00000002 }, + { 0x00067581, 0x00000002 }, + { 0x04002580, 0x00000002 }, + { 0x00067581, 0x00000002 }, + { 0x00000049, 0x00000004 }, + { 0x00005000, 0000000000 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x0000750e, 0x00000002 }, + { 0x00019000, 0x00000002 }, + { 0x00011055, 0x00000014 }, + { 0x00000055, 0x00000012 }, + { 0x0400250f, 0x00000002 }, + { 0x0000504f, 0x00000004 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x00007565, 0x00000002 }, + { 0x00007566, 0x00000002 }, + { 0x00000058, 0x00000004 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x01e655b4, 0x00000002 }, + { 0x4401b0e4, 0x00000002 }, + { 0x01c110e4, 0x00000002 }, + { 0x26667066, 0x00000018 }, + { 0x040c2565, 0x00000002 }, + { 0x00000066, 0x00000018 }, + { 0x04002564, 0x00000002 }, + { 0x00007566, 0x00000002 }, + { 0x0000005d, 0x00000004 }, + { 0x00401069, 0x00000008 }, + { 0x00101000, 0x00000002 }, + { 0x000d80ff, 0x00000002 }, + { 0x0080006c, 0x00000008 }, + { 0x000f9000, 0x00000002 }, + { 0x000e00ff, 0x00000002 }, + { 0000000000, 0x00000006 }, + { 0x0000008f, 0x00000018 }, + { 0x0000005b, 0x00000004 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x00007576, 0x00000002 }, + { 0x00065000, 0x00000002 }, + { 0x00009000, 0x00000002 }, + { 0x00041000, 0x00000002 }, + { 0x0c00350e, 0x00000002 }, + { 0x00049000, 0x00000002 }, + { 0x00051000, 0x00000002 }, + { 0x01e785f8, 0x00000002 }, + { 0x00200000, 0x00000002 }, + { 0x0060007e, 0x0000000c }, + { 0x00007563, 0x00000002 }, + { 0x006075f0, 0x00000021 }, + { 0x20007073, 0x00000004 }, + { 0x00005073, 0x00000004 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x00007576, 0x00000002 }, + { 0x00007577, 0x00000002 }, + { 0x0000750e, 0x00000002 }, + { 0x0000750f, 0x00000002 }, + { 0x00a05000, 0x00000002 }, + { 0x00600083, 0x0000000c }, + { 0x006075f0, 0x00000021 }, + { 0x000075f8, 0x00000002 }, + { 0x00000083, 0x00000004 }, + { 0x000a750e, 0x00000002 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x0020750f, 0x00000002 }, + { 0x00600086, 0x00000004 }, + { 0x00007570, 0x00000002 }, + { 0x00007571, 0x00000002 }, + { 0x00007572, 0x00000006 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x00005000, 0x00000002 }, + { 0x00a05000, 0x00000002 }, + { 0x00007568, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x00000095, 0x0000000c }, + { 0x00058000, 0x00000002 }, + { 0x0c607562, 0x00000002 }, + { 0x00000097, 0x00000004 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x00600096, 0x00000004 }, + { 0x400070e5, 0000000000 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x000380e5, 0x00000002 }, + { 0x000000a8, 0x0000001c }, + { 0x000650aa, 0x00000018 }, + { 0x040025bb, 0x00000002 }, + { 0x000610ab, 0x00000018 }, + { 0x040075bc, 0000000000 }, + { 0x000075bb, 0x00000002 }, + { 0x000075bc, 0000000000 }, + { 0x00090000, 0x00000006 }, + { 0x00090000, 0x00000002 }, + { 0x000d8002, 0x00000006 }, + { 0x00007832, 0x00000002 }, + { 0x00005000, 0x00000002 }, + { 0x000380e7, 0x00000002 }, + { 0x04002c97, 0x00000002 }, + { 0x00007820, 0x00000002 }, + { 0x00007821, 0x00000002 }, + { 0x00007800, 0000000000 }, + { 0x01200000, 0x00000002 }, + { 0x20077000, 0x00000002 }, + { 0x01200000, 0x00000002 }, + { 0x20007000, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x0120751b, 0x00000002 }, + { 0x8040750a, 0x00000002 }, + { 0x8040750b, 0x00000002 }, + { 0x00110000, 0x00000002 }, + { 0x000380e5, 0x00000002 }, + { 0x000000c6, 0x0000001c }, + { 0x000610ab, 0x00000018 }, + { 0x844075bd, 0x00000002 }, + { 0x000610aa, 0x00000018 }, + { 0x840075bb, 0x00000002 }, + { 0x000610ab, 0x00000018 }, + { 0x844075bc, 0x00000002 }, + { 0x000000c9, 0x00000004 }, + { 0x804075bd, 0x00000002 }, + { 0x800075bb, 0x00000002 }, + { 0x804075bc, 0x00000002 }, + { 0x00108000, 0x00000002 }, + { 0x01400000, 0x00000002 }, + { 0x006000cd, 0x0000000c }, + { 0x20c07000, 0x00000020 }, + { 0x000000cf, 0x00000012 }, + { 0x00800000, 0x00000006 }, + { 0x0080751d, 0x00000006 }, + { 0000000000, 0000000000 }, + { 0x0000775c, 0x00000002 }, + { 0x00a05000, 0x00000002 }, + { 0x00661000, 0x00000002 }, + { 0x0460275d, 0x00000020 }, + { 0x00004000, 0000000000 }, + { 0x01e00830, 0x00000002 }, + { 0x21007000, 0000000000 }, + { 0x6464614d, 0000000000 }, + { 0x69687420, 0000000000 }, + { 0x00000073, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x00005000, 0x00000002 }, + { 0x000380d0, 0x00000002 }, + { 0x040025e0, 0x00000002 }, + { 0x000075e1, 0000000000 }, + { 0x00000001, 0000000000 }, + { 0x000380e0, 0x00000002 }, + { 0x04002394, 0x00000002 }, + { 0x00005000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x00000008, 0000000000 }, + { 0x00000004, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, +}; + +static const u32 R200_cp_microcode[][2] = { + { 0x21007000, 0000000000 }, + { 0x20007000, 0000000000 }, + { 0x000000bf, 0x00000004 }, + { 0x000000c3, 0x00000004 }, + { 0x7a685e5d, 0000000000 }, + { 0x5d5d5588, 0000000000 }, + { 0x68659197, 0000000000 }, + { 0x5da19f78, 0000000000 }, + { 0x5d5d5d5d, 0000000000 }, + { 0x5dee5d50, 0000000000 }, + { 0xf2acacac, 0000000000 }, + { 0xe75df9e9, 0000000000 }, + { 0xb1dd0e11, 0000000000 }, + { 0xe2afafaf, 0000000000 }, + { 0x000f0000, 0x00000016 }, + { 0x452f232d, 0000000000 }, + { 0x00000013, 0x00000004 }, + { 0x000f0000, 0x00000016 }, + { 0x452f272d, 0000000000 }, + { 0x000f0001, 0x00000016 }, + { 0x3e4d4a37, 0000000000 }, + { 0x000077ef, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x00000020, 0x0000001a }, + { 0x00004000, 0x0000001e }, + { 0x00061000, 0x00000002 }, + { 0x00000020, 0x0000001a }, + { 0x00004000, 0x0000001e }, + { 0x00061000, 0x00000002 }, + { 0x00000020, 0x0000001a }, + { 0x00004000, 0x0000001e }, + { 0x00000016, 0x00000004 }, + { 0x0003802a, 0x00000002 }, + { 0x040067e0, 0x00000002 }, + { 0x00000016, 0x00000004 }, + { 0x000077e0, 0x00000002 }, + { 0x00065000, 0x00000002 }, + { 0x000037e1, 0x00000002 }, + { 0x040067e1, 0x00000006 }, + { 0x000077e0, 0x00000002 }, + { 0x000077e1, 0x00000002 }, + { 0x000077e1, 0x00000006 }, + { 0xffffffff, 0000000000 }, + { 0x10000000, 0000000000 }, + { 0x07f007f0, 0000000000 }, + { 0x0003802a, 0x00000002 }, + { 0x040067e0, 0x00000006 }, + { 0x0003802c, 0x00000002 }, + { 0x04002741, 0x00000002 }, + { 0x04002741, 0x00000002 }, + { 0x04002743, 0x00000002 }, + { 0x00007675, 0x00000002 }, + { 0x00007676, 0x00000002 }, + { 0x00007677, 0x00000002 }, + { 0x00007678, 0x00000006 }, + { 0x0003802c, 0x00000002 }, + { 0x04002741, 0x00000002 }, + { 0x04002741, 0x00000002 }, + { 0x04002743, 0x00000002 }, + { 0x00007676, 0x00000002 }, + { 0x00007677, 0x00000002 }, + { 0x00007678, 0x00000006 }, + { 0x0003802b, 0x00000002 }, + { 0x04002676, 0x00000002 }, + { 0x00007677, 0x00000002 }, + { 0x0003802c, 0x00000002 }, + { 0x04002741, 0x00000002 }, + { 0x04002743, 0x00000002 }, + { 0x00007678, 0x00000006 }, + { 0x0003802c, 0x00000002 }, + { 0x04002741, 0x00000002 }, + { 0x04002741, 0x00000002 }, + { 0x04002743, 0x00000002 }, + { 0x00007678, 0x00000006 }, + { 0x0000002f, 0x00000018 }, + { 0x0000002f, 0x00000018 }, + { 0000000000, 0x00000006 }, + { 0x00000037, 0x00000018 }, + { 0x00000037, 0x00000018 }, + { 0000000000, 0x00000006 }, + { 0x01605000, 0x00000002 }, + { 0x00065000, 0x00000002 }, + { 0x00098000, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x64c06051, 0x00000004 }, + { 0x00080000, 0x00000016 }, + { 0000000000, 0000000000 }, + { 0x0400251d, 0x00000002 }, + { 0x00007580, 0x00000002 }, + { 0x00067581, 0x00000002 }, + { 0x04002580, 0x00000002 }, + { 0x00067581, 0x00000002 }, + { 0x0000005a, 0x00000004 }, + { 0x00005000, 0000000000 }, + { 0x00061000, 0x00000002 }, + { 0x0000750e, 0x00000002 }, + { 0x00019000, 0x00000002 }, + { 0x00011064, 0x00000014 }, + { 0x00000064, 0x00000012 }, + { 0x0400250f, 0x00000002 }, + { 0x0000505e, 0x00000004 }, + { 0x00007565, 0x00000002 }, + { 0x00007566, 0x00000002 }, + { 0x00000065, 0x00000004 }, + { 0x01e655b4, 0x00000002 }, + { 0x4401b0f0, 0x00000002 }, + { 0x01c110f0, 0x00000002 }, + { 0x26667071, 0x00000018 }, + { 0x040c2565, 0x00000002 }, + { 0x00000071, 0x00000018 }, + { 0x04002564, 0x00000002 }, + { 0x00007566, 0x00000002 }, + { 0x00000068, 0x00000004 }, + { 0x00401074, 0x00000008 }, + { 0x00101000, 0x00000002 }, + { 0x000d80ff, 0x00000002 }, + { 0x00800077, 0x00000008 }, + { 0x000f9000, 0x00000002 }, + { 0x000e00ff, 0x00000002 }, + { 0000000000, 0x00000006 }, + { 0x00000094, 0x00000018 }, + { 0x00000068, 0x00000004 }, + { 0x00007576, 0x00000002 }, + { 0x00065000, 0x00000002 }, + { 0x00009000, 0x00000002 }, + { 0x00041000, 0x00000002 }, + { 0x0c00350e, 0x00000002 }, + { 0x00049000, 0x00000002 }, + { 0x00051000, 0x00000002 }, + { 0x01e785f8, 0x00000002 }, + { 0x00200000, 0x00000002 }, + { 0x00600087, 0x0000000c }, + { 0x00007563, 0x00000002 }, + { 0x006075f0, 0x00000021 }, + { 0x2000707c, 0x00000004 }, + { 0x0000507c, 0x00000004 }, + { 0x00007576, 0x00000002 }, + { 0x00007577, 0x00000002 }, + { 0x0000750e, 0x00000002 }, + { 0x0000750f, 0x00000002 }, + { 0x00a05000, 0x00000002 }, + { 0x0060008a, 0x0000000c }, + { 0x006075f0, 0x00000021 }, + { 0x000075f8, 0x00000002 }, + { 0x0000008a, 0x00000004 }, + { 0x000a750e, 0x00000002 }, + { 0x0020750f, 0x00000002 }, + { 0x0060008d, 0x00000004 }, + { 0x00007570, 0x00000002 }, + { 0x00007571, 0x00000002 }, + { 0x00007572, 0x00000006 }, + { 0x00005000, 0x00000002 }, + { 0x00a05000, 0x00000002 }, + { 0x00007568, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x00000098, 0x0000000c }, + { 0x00058000, 0x00000002 }, + { 0x0c607562, 0x00000002 }, + { 0x0000009a, 0x00000004 }, + { 0x00600099, 0x00000004 }, + { 0x400070f1, 0000000000 }, + { 0x000380f1, 0x00000002 }, + { 0x000000a7, 0x0000001c }, + { 0x000650a9, 0x00000018 }, + { 0x040025bb, 0x00000002 }, + { 0x000610aa, 0x00000018 }, + { 0x040075bc, 0000000000 }, + { 0x000075bb, 0x00000002 }, + { 0x000075bc, 0000000000 }, + { 0x00090000, 0x00000006 }, + { 0x00090000, 0x00000002 }, + { 0x000d8002, 0x00000006 }, + { 0x00005000, 0x00000002 }, + { 0x00007821, 0x00000002 }, + { 0x00007800, 0000000000 }, + { 0x00007821, 0x00000002 }, + { 0x00007800, 0000000000 }, + { 0x01665000, 0x00000002 }, + { 0x000a0000, 0x00000002 }, + { 0x000671cc, 0x00000002 }, + { 0x0286f1cd, 0x00000002 }, + { 0x000000b7, 0x00000010 }, + { 0x21007000, 0000000000 }, + { 0x000000be, 0x0000001c }, + { 0x00065000, 0x00000002 }, + { 0x000a0000, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x000b0000, 0x00000002 }, + { 0x38067000, 0x00000002 }, + { 0x000a00ba, 0x00000004 }, + { 0x20007000, 0000000000 }, + { 0x01200000, 0x00000002 }, + { 0x20077000, 0x00000002 }, + { 0x01200000, 0x00000002 }, + { 0x20007000, 0000000000 }, + { 0x00061000, 0x00000002 }, + { 0x0120751b, 0x00000002 }, + { 0x8040750a, 0x00000002 }, + { 0x8040750b, 0x00000002 }, + { 0x00110000, 0x00000002 }, + { 0x000380f1, 0x00000002 }, + { 0x000000d1, 0x0000001c }, + { 0x000610aa, 0x00000018 }, + { 0x844075bd, 0x00000002 }, + { 0x000610a9, 0x00000018 }, + { 0x840075bb, 0x00000002 }, + { 0x000610aa, 0x00000018 }, + { 0x844075bc, 0x00000002 }, + { 0x000000d4, 0x00000004 }, + { 0x804075bd, 0x00000002 }, + { 0x800075bb, 0x00000002 }, + { 0x804075bc, 0x00000002 }, + { 0x00108000, 0x00000002 }, + { 0x01400000, 0x00000002 }, + { 0x006000d8, 0x0000000c }, + { 0x20c07000, 0x00000020 }, + { 0x000000da, 0x00000012 }, + { 0x00800000, 0x00000006 }, + { 0x0080751d, 0x00000006 }, + { 0x000025bb, 0x00000002 }, + { 0x000040d4, 0x00000004 }, + { 0x0000775c, 0x00000002 }, + { 0x00a05000, 0x00000002 }, + { 0x00661000, 0x00000002 }, + { 0x0460275d, 0x00000020 }, + { 0x00004000, 0000000000 }, + { 0x00007999, 0x00000002 }, + { 0x00a05000, 0x00000002 }, + { 0x00661000, 0x00000002 }, + { 0x0460299b, 0x00000020 }, + { 0x00004000, 0000000000 }, + { 0x01e00830, 0x00000002 }, + { 0x21007000, 0000000000 }, + { 0x00005000, 0x00000002 }, + { 0x00038056, 0x00000002 }, + { 0x040025e0, 0x00000002 }, + { 0x000075e1, 0000000000 }, + { 0x00000001, 0000000000 }, + { 0x000380ed, 0x00000002 }, + { 0x04007394, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x000078c4, 0x00000002 }, + { 0x000078c5, 0x00000002 }, + { 0x000078c6, 0x00000002 }, + { 0x00007924, 0x00000002 }, + { 0x00007925, 0x00000002 }, + { 0x00007926, 0x00000002 }, + { 0x000000f2, 0x00000004 }, + { 0x00007924, 0x00000002 }, + { 0x00007925, 0x00000002 }, + { 0x00007926, 0x00000002 }, + { 0x000000f9, 0x00000004 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, +}; + +static const u32 R300_cp_microcode[][2] = { + { 0x4200e000, 0000000000 }, + { 0x4000e000, 0000000000 }, + { 0x000000ae, 0x00000008 }, + { 0x000000b2, 0x00000008 }, + { 0x67554b4a, 0000000000 }, + { 0x4a4a4475, 0000000000 }, + { 0x55527d83, 0000000000 }, + { 0x4a8c8b65, 0000000000 }, + { 0x4aef4af6, 0000000000 }, + { 0x4ae14a4a, 0000000000 }, + { 0xe4979797, 0000000000 }, + { 0xdb4aebdd, 0000000000 }, + { 0x9ccc4a4a, 0000000000 }, + { 0xd1989898, 0000000000 }, + { 0x4a0f9ad6, 0000000000 }, + { 0x000ca000, 0x00000004 }, + { 0x000d0012, 0x00000038 }, + { 0x0000e8b4, 0x00000004 }, + { 0x000d0014, 0x00000038 }, + { 0x0000e8b6, 0x00000004 }, + { 0x000d0016, 0x00000038 }, + { 0x0000e854, 0x00000004 }, + { 0x000d0018, 0x00000038 }, + { 0x0000e855, 0x00000004 }, + { 0x000d001a, 0x00000038 }, + { 0x0000e856, 0x00000004 }, + { 0x000d001c, 0x00000038 }, + { 0x0000e857, 0x00000004 }, + { 0x000d001e, 0x00000038 }, + { 0x0000e824, 0x00000004 }, + { 0x000d0020, 0x00000038 }, + { 0x0000e825, 0x00000004 }, + { 0x000d0022, 0x00000038 }, + { 0x0000e830, 0x00000004 }, + { 0x000d0024, 0x00000038 }, + { 0x0000f0c0, 0x00000004 }, + { 0x000d0026, 0x00000038 }, + { 0x0000f0c1, 0x00000004 }, + { 0x000d0028, 0x00000038 }, + { 0x0000f041, 0x00000004 }, + { 0x000d002a, 0x00000038 }, + { 0x0000f184, 0x00000004 }, + { 0x000d002c, 0x00000038 }, + { 0x0000f185, 0x00000004 }, + { 0x000d002e, 0x00000038 }, + { 0x0000f186, 0x00000004 }, + { 0x000d0030, 0x00000038 }, + { 0x0000f187, 0x00000004 }, + { 0x000d0032, 0x00000038 }, + { 0x0000f180, 0x00000004 }, + { 0x000d0034, 0x00000038 }, + { 0x0000f393, 0x00000004 }, + { 0x000d0036, 0x00000038 }, + { 0x0000f38a, 0x00000004 }, + { 0x000d0038, 0x00000038 }, + { 0x0000f38e, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000043, 0x00000018 }, + { 0x00cce800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x0000003a, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x2000451d, 0x00000004 }, + { 0x0000e580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x08004580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x00000047, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x00032000, 0x00000004 }, + { 0x00022051, 0x00000028 }, + { 0x00000051, 0x00000024 }, + { 0x0800450f, 0x00000004 }, + { 0x0000a04b, 0x00000008 }, + { 0x0000e565, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000052, 0x00000008 }, + { 0x03cca5b4, 0x00000004 }, + { 0x05432000, 0x00000004 }, + { 0x00022000, 0x00000004 }, + { 0x4ccce05e, 0x00000030 }, + { 0x08274565, 0x00000004 }, + { 0x0000005e, 0x00000030 }, + { 0x08004564, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000055, 0x00000008 }, + { 0x00802061, 0x00000010 }, + { 0x00202000, 0x00000004 }, + { 0x001b00ff, 0x00000004 }, + { 0x01000064, 0x00000010 }, + { 0x001f2000, 0x00000004 }, + { 0x001c00ff, 0x00000004 }, + { 0000000000, 0x0000000c }, + { 0x00000080, 0x00000030 }, + { 0x00000055, 0x00000008 }, + { 0x0000e576, 0x00000004 }, + { 0x000ca000, 0x00000004 }, + { 0x00012000, 0x00000004 }, + { 0x00082000, 0x00000004 }, + { 0x1800650e, 0x00000004 }, + { 0x00092000, 0x00000004 }, + { 0x000a2000, 0x00000004 }, + { 0x000f0000, 0x00000004 }, + { 0x00400000, 0x00000004 }, + { 0x00000074, 0x00000018 }, + { 0x0000e563, 0x00000004 }, + { 0x00c0e5f9, 0x000000c2 }, + { 0x00000069, 0x00000008 }, + { 0x0000a069, 0x00000008 }, + { 0x0000e576, 0x00000004 }, + { 0x0000e577, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x0000e50f, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000077, 0x00000018 }, + { 0x00c0e5f9, 0x000000c2 }, + { 0x00000077, 0x00000008 }, + { 0x0014e50e, 0x00000004 }, + { 0x0040e50f, 0x00000004 }, + { 0x00c0007a, 0x00000008 }, + { 0x0000e570, 0x00000004 }, + { 0x0000e571, 0x00000004 }, + { 0x0000e572, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x0000e568, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00000084, 0x00000018 }, + { 0x000b0000, 0x00000004 }, + { 0x18c0e562, 0x00000004 }, + { 0x00000086, 0x00000008 }, + { 0x00c00085, 0x00000008 }, + { 0x000700e3, 0x00000004 }, + { 0x00000092, 0x00000038 }, + { 0x000ca094, 0x00000030 }, + { 0x080045bb, 0x00000004 }, + { 0x000c2095, 0x00000030 }, + { 0x0800e5bc, 0000000000 }, + { 0x0000e5bb, 0x00000004 }, + { 0x0000e5bc, 0000000000 }, + { 0x00120000, 0x0000000c }, + { 0x00120000, 0x00000004 }, + { 0x001b0002, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e800, 0000000000 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e82e, 0000000000 }, + { 0x02cca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000ce1cc, 0x00000004 }, + { 0x050de1cd, 0x00000004 }, + { 0x00400000, 0x00000004 }, + { 0x000000a4, 0x00000018 }, + { 0x00c0a000, 0x00000004 }, + { 0x000000a1, 0x00000008 }, + { 0x000000a6, 0x00000020 }, + { 0x4200e000, 0000000000 }, + { 0x000000ad, 0x00000038 }, + { 0x000ca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00160000, 0x00000004 }, + { 0x700ce000, 0x00000004 }, + { 0x001400a9, 0x00000008 }, + { 0x4000e000, 0000000000 }, + { 0x02400000, 0x00000004 }, + { 0x400ee000, 0x00000004 }, + { 0x02400000, 0x00000004 }, + { 0x4000e000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0240e51b, 0x00000004 }, + { 0x0080e50a, 0x00000005 }, + { 0x0080e50b, 0x00000005 }, + { 0x00220000, 0x00000004 }, + { 0x000700e3, 0x00000004 }, + { 0x000000c0, 0x00000038 }, + { 0x000c2095, 0x00000030 }, + { 0x0880e5bd, 0x00000005 }, + { 0x000c2094, 0x00000030 }, + { 0x0800e5bb, 0x00000005 }, + { 0x000c2095, 0x00000030 }, + { 0x0880e5bc, 0x00000005 }, + { 0x000000c3, 0x00000008 }, + { 0x0080e5bd, 0x00000005 }, + { 0x0000e5bb, 0x00000005 }, + { 0x0080e5bc, 0x00000005 }, + { 0x00210000, 0x00000004 }, + { 0x02800000, 0x00000004 }, + { 0x00c000c7, 0x00000018 }, + { 0x4180e000, 0x00000040 }, + { 0x000000c9, 0x00000024 }, + { 0x01000000, 0x0000000c }, + { 0x0100e51d, 0x0000000c }, + { 0x000045bb, 0x00000004 }, + { 0x000080c3, 0x00000008 }, + { 0x0000f3ce, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053cf, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f3d2, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053d3, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f39d, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c0539e, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x03c00830, 0x00000004 }, + { 0x4200e000, 0000000000 }, + { 0x0000a000, 0x00000004 }, + { 0x200045e0, 0x00000004 }, + { 0x0000e5e1, 0000000000 }, + { 0x00000001, 0000000000 }, + { 0x000700e0, 0x00000004 }, + { 0x0800e394, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x0000e8c4, 0x00000004 }, + { 0x0000e8c5, 0x00000004 }, + { 0x0000e8c6, 0x00000004 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000e4, 0x00000008 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000eb, 0x00000008 }, + { 0x02c02000, 0x00000004 }, + { 0x00060000, 0x00000004 }, + { 0x000000f3, 0x00000034 }, + { 0x000000f0, 0x00000008 }, + { 0x00008000, 0x00000004 }, + { 0xc000e000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x001d0018, 0x00000004 }, + { 0x001a0001, 0x00000004 }, + { 0x000000fb, 0x00000034 }, + { 0x0000004a, 0x00000008 }, + { 0x0500a04a, 0x00000008 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, +}; + +static const u32 R420_cp_microcode[][2] = { + { 0x4200e000, 0000000000 }, + { 0x4000e000, 0000000000 }, + { 0x00000099, 0x00000008 }, + { 0x0000009d, 0x00000008 }, + { 0x4a554b4a, 0000000000 }, + { 0x4a4a4467, 0000000000 }, + { 0x55526f75, 0000000000 }, + { 0x4a7e7d65, 0000000000 }, + { 0xd9d3dff6, 0000000000 }, + { 0x4ac54a4a, 0000000000 }, + { 0xc8828282, 0000000000 }, + { 0xbf4acfc1, 0000000000 }, + { 0x87b04a4a, 0000000000 }, + { 0xb5838383, 0000000000 }, + { 0x4a0f85ba, 0000000000 }, + { 0x000ca000, 0x00000004 }, + { 0x000d0012, 0x00000038 }, + { 0x0000e8b4, 0x00000004 }, + { 0x000d0014, 0x00000038 }, + { 0x0000e8b6, 0x00000004 }, + { 0x000d0016, 0x00000038 }, + { 0x0000e854, 0x00000004 }, + { 0x000d0018, 0x00000038 }, + { 0x0000e855, 0x00000004 }, + { 0x000d001a, 0x00000038 }, + { 0x0000e856, 0x00000004 }, + { 0x000d001c, 0x00000038 }, + { 0x0000e857, 0x00000004 }, + { 0x000d001e, 0x00000038 }, + { 0x0000e824, 0x00000004 }, + { 0x000d0020, 0x00000038 }, + { 0x0000e825, 0x00000004 }, + { 0x000d0022, 0x00000038 }, + { 0x0000e830, 0x00000004 }, + { 0x000d0024, 0x00000038 }, + { 0x0000f0c0, 0x00000004 }, + { 0x000d0026, 0x00000038 }, + { 0x0000f0c1, 0x00000004 }, + { 0x000d0028, 0x00000038 }, + { 0x0000f041, 0x00000004 }, + { 0x000d002a, 0x00000038 }, + { 0x0000f184, 0x00000004 }, + { 0x000d002c, 0x00000038 }, + { 0x0000f185, 0x00000004 }, + { 0x000d002e, 0x00000038 }, + { 0x0000f186, 0x00000004 }, + { 0x000d0030, 0x00000038 }, + { 0x0000f187, 0x00000004 }, + { 0x000d0032, 0x00000038 }, + { 0x0000f180, 0x00000004 }, + { 0x000d0034, 0x00000038 }, + { 0x0000f393, 0x00000004 }, + { 0x000d0036, 0x00000038 }, + { 0x0000f38a, 0x00000004 }, + { 0x000d0038, 0x00000038 }, + { 0x0000f38e, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000043, 0x00000018 }, + { 0x00cce800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x0000003a, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x2000451d, 0x00000004 }, + { 0x0000e580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x08004580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x00000047, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x00032000, 0x00000004 }, + { 0x00022051, 0x00000028 }, + { 0x00000051, 0x00000024 }, + { 0x0800450f, 0x00000004 }, + { 0x0000a04b, 0x00000008 }, + { 0x0000e565, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000052, 0x00000008 }, + { 0x03cca5b4, 0x00000004 }, + { 0x05432000, 0x00000004 }, + { 0x00022000, 0x00000004 }, + { 0x4ccce05e, 0x00000030 }, + { 0x08274565, 0x00000004 }, + { 0x0000005e, 0x00000030 }, + { 0x08004564, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000055, 0x00000008 }, + { 0x00802061, 0x00000010 }, + { 0x00202000, 0x00000004 }, + { 0x001b00ff, 0x00000004 }, + { 0x01000064, 0x00000010 }, + { 0x001f2000, 0x00000004 }, + { 0x001c00ff, 0x00000004 }, + { 0000000000, 0x0000000c }, + { 0x00000072, 0x00000030 }, + { 0x00000055, 0x00000008 }, + { 0x0000e576, 0x00000004 }, + { 0x0000e577, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x0000e50f, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000069, 0x00000018 }, + { 0x00c0e5f9, 0x000000c2 }, + { 0x00000069, 0x00000008 }, + { 0x0014e50e, 0x00000004 }, + { 0x0040e50f, 0x00000004 }, + { 0x00c0006c, 0x00000008 }, + { 0x0000e570, 0x00000004 }, + { 0x0000e571, 0x00000004 }, + { 0x0000e572, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x0000e568, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00000076, 0x00000018 }, + { 0x000b0000, 0x00000004 }, + { 0x18c0e562, 0x00000004 }, + { 0x00000078, 0x00000008 }, + { 0x00c00077, 0x00000008 }, + { 0x000700c7, 0x00000004 }, + { 0x00000080, 0x00000038 }, + { 0x0000e5bb, 0x00000004 }, + { 0x0000e5bc, 0000000000 }, + { 0x0000a000, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e800, 0000000000 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e82e, 0000000000 }, + { 0x02cca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000ce1cc, 0x00000004 }, + { 0x050de1cd, 0x00000004 }, + { 0x00400000, 0x00000004 }, + { 0x0000008f, 0x00000018 }, + { 0x00c0a000, 0x00000004 }, + { 0x0000008c, 0x00000008 }, + { 0x00000091, 0x00000020 }, + { 0x4200e000, 0000000000 }, + { 0x00000098, 0x00000038 }, + { 0x000ca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00160000, 0x00000004 }, + { 0x700ce000, 0x00000004 }, + { 0x00140094, 0x00000008 }, + { 0x4000e000, 0000000000 }, + { 0x02400000, 0x00000004 }, + { 0x400ee000, 0x00000004 }, + { 0x02400000, 0x00000004 }, + { 0x4000e000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0240e51b, 0x00000004 }, + { 0x0080e50a, 0x00000005 }, + { 0x0080e50b, 0x00000005 }, + { 0x00220000, 0x00000004 }, + { 0x000700c7, 0x00000004 }, + { 0x000000a4, 0x00000038 }, + { 0x0080e5bd, 0x00000005 }, + { 0x0000e5bb, 0x00000005 }, + { 0x0080e5bc, 0x00000005 }, + { 0x00210000, 0x00000004 }, + { 0x02800000, 0x00000004 }, + { 0x00c000ab, 0x00000018 }, + { 0x4180e000, 0x00000040 }, + { 0x000000ad, 0x00000024 }, + { 0x01000000, 0x0000000c }, + { 0x0100e51d, 0x0000000c }, + { 0x000045bb, 0x00000004 }, + { 0x000080a7, 0x00000008 }, + { 0x0000f3ce, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053cf, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f3d2, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053d3, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f39d, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c0539e, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x03c00830, 0x00000004 }, + { 0x4200e000, 0000000000 }, + { 0x0000a000, 0x00000004 }, + { 0x200045e0, 0x00000004 }, + { 0x0000e5e1, 0000000000 }, + { 0x00000001, 0000000000 }, + { 0x000700c4, 0x00000004 }, + { 0x0800e394, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x0000e8c4, 0x00000004 }, + { 0x0000e8c5, 0x00000004 }, + { 0x0000e8c6, 0x00000004 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000c8, 0x00000008 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000cf, 0x00000008 }, + { 0x02c02000, 0x00000004 }, + { 0x00060000, 0x00000004 }, + { 0x000000d7, 0x00000034 }, + { 0x000000d4, 0x00000008 }, + { 0x00008000, 0x00000004 }, + { 0xc000e000, 0000000000 }, + { 0x0000e1cc, 0x00000004 }, + { 0x0500e1cd, 0x00000004 }, + { 0x000ca000, 0x00000004 }, + { 0x000000de, 0x00000034 }, + { 0x000000da, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x0019e1cc, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x0500a000, 0x00000004 }, + { 0x080041cd, 0x00000004 }, + { 0x000ca000, 0x00000004 }, + { 0x000000fb, 0x00000034 }, + { 0x0000004a, 0x00000008 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x001d0018, 0x00000004 }, + { 0x001a0001, 0x00000004 }, + { 0x000000fb, 0x00000034 }, + { 0x0000004a, 0x00000008 }, + { 0x0500a04a, 0x00000008 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, +}; + +static const u32 RS600_cp_microcode[][2] = { + { 0x4200e000, 0000000000 }, + { 0x4000e000, 0000000000 }, + { 0x000000a0, 0x00000008 }, + { 0x000000a4, 0x00000008 }, + { 0x4a554b4a, 0000000000 }, + { 0x4a4a4467, 0000000000 }, + { 0x55526f75, 0000000000 }, + { 0x4a7e7d65, 0000000000 }, + { 0x4ae74af6, 0000000000 }, + { 0x4ad34a4a, 0000000000 }, + { 0xd6898989, 0000000000 }, + { 0xcd4addcf, 0000000000 }, + { 0x8ebe4ae2, 0000000000 }, + { 0xc38a8a8a, 0000000000 }, + { 0x4a0f8cc8, 0000000000 }, + { 0x000ca000, 0x00000004 }, + { 0x000d0012, 0x00000038 }, + { 0x0000e8b4, 0x00000004 }, + { 0x000d0014, 0x00000038 }, + { 0x0000e8b6, 0x00000004 }, + { 0x000d0016, 0x00000038 }, + { 0x0000e854, 0x00000004 }, + { 0x000d0018, 0x00000038 }, + { 0x0000e855, 0x00000004 }, + { 0x000d001a, 0x00000038 }, + { 0x0000e856, 0x00000004 }, + { 0x000d001c, 0x00000038 }, + { 0x0000e857, 0x00000004 }, + { 0x000d001e, 0x00000038 }, + { 0x0000e824, 0x00000004 }, + { 0x000d0020, 0x00000038 }, + { 0x0000e825, 0x00000004 }, + { 0x000d0022, 0x00000038 }, + { 0x0000e830, 0x00000004 }, + { 0x000d0024, 0x00000038 }, + { 0x0000f0c0, 0x00000004 }, + { 0x000d0026, 0x00000038 }, + { 0x0000f0c1, 0x00000004 }, + { 0x000d0028, 0x00000038 }, + { 0x0000f041, 0x00000004 }, + { 0x000d002a, 0x00000038 }, + { 0x0000f184, 0x00000004 }, + { 0x000d002c, 0x00000038 }, + { 0x0000f185, 0x00000004 }, + { 0x000d002e, 0x00000038 }, + { 0x0000f186, 0x00000004 }, + { 0x000d0030, 0x00000038 }, + { 0x0000f187, 0x00000004 }, + { 0x000d0032, 0x00000038 }, + { 0x0000f180, 0x00000004 }, + { 0x000d0034, 0x00000038 }, + { 0x0000f393, 0x00000004 }, + { 0x000d0036, 0x00000038 }, + { 0x0000f38a, 0x00000004 }, + { 0x000d0038, 0x00000038 }, + { 0x0000f38e, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000043, 0x00000018 }, + { 0x00cce800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x0000003a, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x2000451d, 0x00000004 }, + { 0x0000e580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x08004580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x00000047, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x00032000, 0x00000004 }, + { 0x00022051, 0x00000028 }, + { 0x00000051, 0x00000024 }, + { 0x0800450f, 0x00000004 }, + { 0x0000a04b, 0x00000008 }, + { 0x0000e565, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000052, 0x00000008 }, + { 0x03cca5b4, 0x00000004 }, + { 0x05432000, 0x00000004 }, + { 0x00022000, 0x00000004 }, + { 0x4ccce05e, 0x00000030 }, + { 0x08274565, 0x00000004 }, + { 0x0000005e, 0x00000030 }, + { 0x08004564, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000055, 0x00000008 }, + { 0x00802061, 0x00000010 }, + { 0x00202000, 0x00000004 }, + { 0x001b00ff, 0x00000004 }, + { 0x01000064, 0x00000010 }, + { 0x001f2000, 0x00000004 }, + { 0x001c00ff, 0x00000004 }, + { 0000000000, 0x0000000c }, + { 0x00000072, 0x00000030 }, + { 0x00000055, 0x00000008 }, + { 0x0000e576, 0x00000004 }, + { 0x0000e577, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x0000e50f, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000069, 0x00000018 }, + { 0x00c0e5f9, 0x000000c2 }, + { 0x00000069, 0x00000008 }, + { 0x0014e50e, 0x00000004 }, + { 0x0040e50f, 0x00000004 }, + { 0x00c0006c, 0x00000008 }, + { 0x0000e570, 0x00000004 }, + { 0x0000e571, 0x00000004 }, + { 0x0000e572, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x0000e568, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00000076, 0x00000018 }, + { 0x000b0000, 0x00000004 }, + { 0x18c0e562, 0x00000004 }, + { 0x00000078, 0x00000008 }, + { 0x00c00077, 0x00000008 }, + { 0x000700d5, 0x00000004 }, + { 0x00000084, 0x00000038 }, + { 0x000ca086, 0x00000030 }, + { 0x080045bb, 0x00000004 }, + { 0x000c2087, 0x00000030 }, + { 0x0800e5bc, 0000000000 }, + { 0x0000e5bb, 0x00000004 }, + { 0x0000e5bc, 0000000000 }, + { 0x00120000, 0x0000000c }, + { 0x00120000, 0x00000004 }, + { 0x001b0002, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e800, 0000000000 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e82e, 0000000000 }, + { 0x02cca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000ce1cc, 0x00000004 }, + { 0x050de1cd, 0x00000004 }, + { 0x00400000, 0x00000004 }, + { 0x00000096, 0x00000018 }, + { 0x00c0a000, 0x00000004 }, + { 0x00000093, 0x00000008 }, + { 0x00000098, 0x00000020 }, + { 0x4200e000, 0000000000 }, + { 0x0000009f, 0x00000038 }, + { 0x000ca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00160000, 0x00000004 }, + { 0x700ce000, 0x00000004 }, + { 0x0014009b, 0x00000008 }, + { 0x4000e000, 0000000000 }, + { 0x02400000, 0x00000004 }, + { 0x400ee000, 0x00000004 }, + { 0x02400000, 0x00000004 }, + { 0x4000e000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0240e51b, 0x00000004 }, + { 0x0080e50a, 0x00000005 }, + { 0x0080e50b, 0x00000005 }, + { 0x00220000, 0x00000004 }, + { 0x000700d5, 0x00000004 }, + { 0x000000b2, 0x00000038 }, + { 0x000c2087, 0x00000030 }, + { 0x0880e5bd, 0x00000005 }, + { 0x000c2086, 0x00000030 }, + { 0x0800e5bb, 0x00000005 }, + { 0x000c2087, 0x00000030 }, + { 0x0880e5bc, 0x00000005 }, + { 0x000000b5, 0x00000008 }, + { 0x0080e5bd, 0x00000005 }, + { 0x0000e5bb, 0x00000005 }, + { 0x0080e5bc, 0x00000005 }, + { 0x00210000, 0x00000004 }, + { 0x02800000, 0x00000004 }, + { 0x00c000b9, 0x00000018 }, + { 0x4180e000, 0x00000040 }, + { 0x000000bb, 0x00000024 }, + { 0x01000000, 0x0000000c }, + { 0x0100e51d, 0x0000000c }, + { 0x000045bb, 0x00000004 }, + { 0x000080b5, 0x00000008 }, + { 0x0000f3ce, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053cf, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f3d2, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053d3, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f39d, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c0539e, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x03c00830, 0x00000004 }, + { 0x4200e000, 0000000000 }, + { 0x0000a000, 0x00000004 }, + { 0x200045e0, 0x00000004 }, + { 0x0000e5e1, 0000000000 }, + { 0x00000001, 0000000000 }, + { 0x000700d2, 0x00000004 }, + { 0x0800e394, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x0000e8c4, 0x00000004 }, + { 0x0000e8c5, 0x00000004 }, + { 0x0000e8c6, 0x00000004 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000d6, 0x00000008 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000dd, 0x00000008 }, + { 0x00e00116, 0000000000 }, + { 0x000700e1, 0x00000004 }, + { 0x0800401c, 0x00000004 }, + { 0x200050e7, 0x00000004 }, + { 0x0000e01d, 0x00000004 }, + { 0x000000e4, 0x00000008 }, + { 0x02c02000, 0x00000004 }, + { 0x00060000, 0x00000004 }, + { 0x000000eb, 0x00000034 }, + { 0x000000e8, 0x00000008 }, + { 0x00008000, 0x00000004 }, + { 0xc000e000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x001d0018, 0x00000004 }, + { 0x001a0001, 0x00000004 }, + { 0x000000fb, 0x00000034 }, + { 0x0000004a, 0x00000008 }, + { 0x0500a04a, 0x00000008 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, +}; + +static const u32 RS690_cp_microcode[][2] = { + { 0x000000dd, 0x00000008 }, + { 0x000000df, 0x00000008 }, + { 0x000000a0, 0x00000008 }, + { 0x000000a4, 0x00000008 }, + { 0x4a554b4a, 0000000000 }, + { 0x4a4a4467, 0000000000 }, + { 0x55526f75, 0000000000 }, + { 0x4a7e7d65, 0000000000 }, + { 0x4ad74af6, 0000000000 }, + { 0x4ac94a4a, 0000000000 }, + { 0xcc898989, 0000000000 }, + { 0xc34ad3c5, 0000000000 }, + { 0x8e4a4a4a, 0000000000 }, + { 0x4a8a8a8a, 0000000000 }, + { 0x4a0f8c4a, 0000000000 }, + { 0x000ca000, 0x00000004 }, + { 0x000d0012, 0x00000038 }, + { 0x0000e8b4, 0x00000004 }, + { 0x000d0014, 0x00000038 }, + { 0x0000e8b6, 0x00000004 }, + { 0x000d0016, 0x00000038 }, + { 0x0000e854, 0x00000004 }, + { 0x000d0018, 0x00000038 }, + { 0x0000e855, 0x00000004 }, + { 0x000d001a, 0x00000038 }, + { 0x0000e856, 0x00000004 }, + { 0x000d001c, 0x00000038 }, + { 0x0000e857, 0x00000004 }, + { 0x000d001e, 0x00000038 }, + { 0x0000e824, 0x00000004 }, + { 0x000d0020, 0x00000038 }, + { 0x0000e825, 0x00000004 }, + { 0x000d0022, 0x00000038 }, + { 0x0000e830, 0x00000004 }, + { 0x000d0024, 0x00000038 }, + { 0x0000f0c0, 0x00000004 }, + { 0x000d0026, 0x00000038 }, + { 0x0000f0c1, 0x00000004 }, + { 0x000d0028, 0x00000038 }, + { 0x0000f041, 0x00000004 }, + { 0x000d002a, 0x00000038 }, + { 0x0000f184, 0x00000004 }, + { 0x000d002c, 0x00000038 }, + { 0x0000f185, 0x00000004 }, + { 0x000d002e, 0x00000038 }, + { 0x0000f186, 0x00000004 }, + { 0x000d0030, 0x00000038 }, + { 0x0000f187, 0x00000004 }, + { 0x000d0032, 0x00000038 }, + { 0x0000f180, 0x00000004 }, + { 0x000d0034, 0x00000038 }, + { 0x0000f393, 0x00000004 }, + { 0x000d0036, 0x00000038 }, + { 0x0000f38a, 0x00000004 }, + { 0x000d0038, 0x00000038 }, + { 0x0000f38e, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000043, 0x00000018 }, + { 0x00cce800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x0000003a, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x2000451d, 0x00000004 }, + { 0x0000e580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x08004580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x00000047, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x00032000, 0x00000004 }, + { 0x00022051, 0x00000028 }, + { 0x00000051, 0x00000024 }, + { 0x0800450f, 0x00000004 }, + { 0x0000a04b, 0x00000008 }, + { 0x0000e565, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000052, 0x00000008 }, + { 0x03cca5b4, 0x00000004 }, + { 0x05432000, 0x00000004 }, + { 0x00022000, 0x00000004 }, + { 0x4ccce05e, 0x00000030 }, + { 0x08274565, 0x00000004 }, + { 0x0000005e, 0x00000030 }, + { 0x08004564, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000055, 0x00000008 }, + { 0x00802061, 0x00000010 }, + { 0x00202000, 0x00000004 }, + { 0x001b00ff, 0x00000004 }, + { 0x01000064, 0x00000010 }, + { 0x001f2000, 0x00000004 }, + { 0x001c00ff, 0x00000004 }, + { 0000000000, 0x0000000c }, + { 0x00000072, 0x00000030 }, + { 0x00000055, 0x00000008 }, + { 0x0000e576, 0x00000004 }, + { 0x0000e577, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x0000e50f, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000069, 0x00000018 }, + { 0x00c0e5f9, 0x000000c2 }, + { 0x00000069, 0x00000008 }, + { 0x0014e50e, 0x00000004 }, + { 0x0040e50f, 0x00000004 }, + { 0x00c0006c, 0x00000008 }, + { 0x0000e570, 0x00000004 }, + { 0x0000e571, 0x00000004 }, + { 0x0000e572, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x0000e568, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00000076, 0x00000018 }, + { 0x000b0000, 0x00000004 }, + { 0x18c0e562, 0x00000004 }, + { 0x00000078, 0x00000008 }, + { 0x00c00077, 0x00000008 }, + { 0x000700cb, 0x00000004 }, + { 0x00000084, 0x00000038 }, + { 0x000ca086, 0x00000030 }, + { 0x080045bb, 0x00000004 }, + { 0x000c2087, 0x00000030 }, + { 0x0800e5bc, 0000000000 }, + { 0x0000e5bb, 0x00000004 }, + { 0x0000e5bc, 0000000000 }, + { 0x00120000, 0x0000000c }, + { 0x00120000, 0x00000004 }, + { 0x001b0002, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e800, 0000000000 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e82e, 0000000000 }, + { 0x02cca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000ce1cc, 0x00000004 }, + { 0x050de1cd, 0x00000004 }, + { 0x00400000, 0x00000004 }, + { 0x00000096, 0x00000018 }, + { 0x00c0a000, 0x00000004 }, + { 0x00000093, 0x00000008 }, + { 0x00000098, 0x00000020 }, + { 0x4200e000, 0000000000 }, + { 0x0000009f, 0x00000038 }, + { 0x000ca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00160000, 0x00000004 }, + { 0x700ce000, 0x00000004 }, + { 0x0014009b, 0x00000008 }, + { 0x4000e000, 0000000000 }, + { 0x02400000, 0x00000004 }, + { 0x400ee000, 0x00000004 }, + { 0x02400000, 0x00000004 }, + { 0x4000e000, 0000000000 }, + { 0x00100000, 0x0000002c }, + { 0x00004000, 0000000000 }, + { 0x080045c8, 0x00000004 }, + { 0x00240005, 0x00000004 }, + { 0x08004d0b, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x0240e51b, 0x00000004 }, + { 0x0080e50a, 0x00000005 }, + { 0x0080e50b, 0x00000005 }, + { 0x00220000, 0x00000004 }, + { 0x000700cb, 0x00000004 }, + { 0x000000b7, 0x00000038 }, + { 0x000c2087, 0x00000030 }, + { 0x0880e5bd, 0x00000005 }, + { 0x000c2086, 0x00000030 }, + { 0x0800e5bb, 0x00000005 }, + { 0x000c2087, 0x00000030 }, + { 0x0880e5bc, 0x00000005 }, + { 0x000000ba, 0x00000008 }, + { 0x0080e5bd, 0x00000005 }, + { 0x0000e5bb, 0x00000005 }, + { 0x0080e5bc, 0x00000005 }, + { 0x00210000, 0x00000004 }, + { 0x02800000, 0x00000004 }, + { 0x00c000be, 0x00000018 }, + { 0x4180e000, 0x00000040 }, + { 0x000000c0, 0x00000024 }, + { 0x01000000, 0x0000000c }, + { 0x0100e51d, 0x0000000c }, + { 0x000045bb, 0x00000004 }, + { 0x000080ba, 0x00000008 }, + { 0x03c00830, 0x00000004 }, + { 0x4200e000, 0000000000 }, + { 0x0000a000, 0x00000004 }, + { 0x200045e0, 0x00000004 }, + { 0x0000e5e1, 0000000000 }, + { 0x00000001, 0000000000 }, + { 0x000700c8, 0x00000004 }, + { 0x0800e394, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x0000e8c4, 0x00000004 }, + { 0x0000e8c5, 0x00000004 }, + { 0x0000e8c6, 0x00000004 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000cc, 0x00000008 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000d3, 0x00000008 }, + { 0x02c02000, 0x00000004 }, + { 0x00060000, 0x00000004 }, + { 0x000000db, 0x00000034 }, + { 0x000000d8, 0x00000008 }, + { 0x00008000, 0x00000004 }, + { 0xc000e000, 0000000000 }, + { 0x000000e1, 0x00000030 }, + { 0x4200e000, 0000000000 }, + { 0x000000e1, 0x00000030 }, + { 0x4000e000, 0000000000 }, + { 0x0025001b, 0x00000004 }, + { 0x00230000, 0x00000004 }, + { 0x00250005, 0x00000004 }, + { 0x000000e6, 0x00000034 }, + { 0000000000, 0x0000000c }, + { 0x00244000, 0x00000004 }, + { 0x080045c8, 0x00000004 }, + { 0x00240005, 0x00000004 }, + { 0x08004d0b, 0x0000000c }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x001d0018, 0x00000004 }, + { 0x001a0001, 0x00000004 }, + { 0x000000fb, 0x00000034 }, + { 0x0000004a, 0x00000008 }, + { 0x0500a04a, 0x00000008 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, +}; + +static const u32 R520_cp_microcode[][2] = { + { 0x4200e000, 0000000000 }, + { 0x4000e000, 0000000000 }, + { 0x00000099, 0x00000008 }, + { 0x0000009d, 0x00000008 }, + { 0x4a554b4a, 0000000000 }, + { 0x4a4a4467, 0000000000 }, + { 0x55526f75, 0000000000 }, + { 0x4a7e7d65, 0000000000 }, + { 0xe0dae6f6, 0000000000 }, + { 0x4ac54a4a, 0000000000 }, + { 0xc8828282, 0000000000 }, + { 0xbf4acfc1, 0000000000 }, + { 0x87b04ad5, 0000000000 }, + { 0xb5838383, 0000000000 }, + { 0x4a0f85ba, 0000000000 }, + { 0x000ca000, 0x00000004 }, + { 0x000d0012, 0x00000038 }, + { 0x0000e8b4, 0x00000004 }, + { 0x000d0014, 0x00000038 }, + { 0x0000e8b6, 0x00000004 }, + { 0x000d0016, 0x00000038 }, + { 0x0000e854, 0x00000004 }, + { 0x000d0018, 0x00000038 }, + { 0x0000e855, 0x00000004 }, + { 0x000d001a, 0x00000038 }, + { 0x0000e856, 0x00000004 }, + { 0x000d001c, 0x00000038 }, + { 0x0000e857, 0x00000004 }, + { 0x000d001e, 0x00000038 }, + { 0x0000e824, 0x00000004 }, + { 0x000d0020, 0x00000038 }, + { 0x0000e825, 0x00000004 }, + { 0x000d0022, 0x00000038 }, + { 0x0000e830, 0x00000004 }, + { 0x000d0024, 0x00000038 }, + { 0x0000f0c0, 0x00000004 }, + { 0x000d0026, 0x00000038 }, + { 0x0000f0c1, 0x00000004 }, + { 0x000d0028, 0x00000038 }, + { 0x0000e000, 0x00000004 }, + { 0x000d002a, 0x00000038 }, + { 0x0000e000, 0x00000004 }, + { 0x000d002c, 0x00000038 }, + { 0x0000e000, 0x00000004 }, + { 0x000d002e, 0x00000038 }, + { 0x0000e000, 0x00000004 }, + { 0x000d0030, 0x00000038 }, + { 0x0000e000, 0x00000004 }, + { 0x000d0032, 0x00000038 }, + { 0x0000f180, 0x00000004 }, + { 0x000d0034, 0x00000038 }, + { 0x0000f393, 0x00000004 }, + { 0x000d0036, 0x00000038 }, + { 0x0000f38a, 0x00000004 }, + { 0x000d0038, 0x00000038 }, + { 0x0000f38e, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000043, 0x00000018 }, + { 0x00cce800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x0000003a, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x2000451d, 0x00000004 }, + { 0x0000e580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x08004580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x00000047, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x00032000, 0x00000004 }, + { 0x00022051, 0x00000028 }, + { 0x00000051, 0x00000024 }, + { 0x0800450f, 0x00000004 }, + { 0x0000a04b, 0x00000008 }, + { 0x0000e565, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000052, 0x00000008 }, + { 0x03cca5b4, 0x00000004 }, + { 0x05432000, 0x00000004 }, + { 0x00022000, 0x00000004 }, + { 0x4ccce05e, 0x00000030 }, + { 0x08274565, 0x00000004 }, + { 0x0000005e, 0x00000030 }, + { 0x08004564, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000055, 0x00000008 }, + { 0x00802061, 0x00000010 }, + { 0x00202000, 0x00000004 }, + { 0x001b00ff, 0x00000004 }, + { 0x01000064, 0x00000010 }, + { 0x001f2000, 0x00000004 }, + { 0x001c00ff, 0x00000004 }, + { 0000000000, 0x0000000c }, + { 0x00000072, 0x00000030 }, + { 0x00000055, 0x00000008 }, + { 0x0000e576, 0x00000004 }, + { 0x0000e577, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x0000e50f, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000069, 0x00000018 }, + { 0x00c0e5f9, 0x000000c2 }, + { 0x00000069, 0x00000008 }, + { 0x0014e50e, 0x00000004 }, + { 0x0040e50f, 0x00000004 }, + { 0x00c0006c, 0x00000008 }, + { 0x0000e570, 0x00000004 }, + { 0x0000e571, 0x00000004 }, + { 0x0000e572, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x0000e568, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00000076, 0x00000018 }, + { 0x000b0000, 0x00000004 }, + { 0x18c0e562, 0x00000004 }, + { 0x00000078, 0x00000008 }, + { 0x00c00077, 0x00000008 }, + { 0x000700c7, 0x00000004 }, + { 0x00000080, 0x00000038 }, + { 0x0000e5bb, 0x00000004 }, + { 0x0000e5bc, 0000000000 }, + { 0x0000a000, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e800, 0000000000 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e82e, 0000000000 }, + { 0x02cca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000ce1cc, 0x00000004 }, + { 0x050de1cd, 0x00000004 }, + { 0x00400000, 0x00000004 }, + { 0x0000008f, 0x00000018 }, + { 0x00c0a000, 0x00000004 }, + { 0x0000008c, 0x00000008 }, + { 0x00000091, 0x00000020 }, + { 0x4200e000, 0000000000 }, + { 0x00000098, 0x00000038 }, + { 0x000ca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00160000, 0x00000004 }, + { 0x700ce000, 0x00000004 }, + { 0x00140094, 0x00000008 }, + { 0x4000e000, 0000000000 }, + { 0x02400000, 0x00000004 }, + { 0x400ee000, 0x00000004 }, + { 0x02400000, 0x00000004 }, + { 0x4000e000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0240e51b, 0x00000004 }, + { 0x0080e50a, 0x00000005 }, + { 0x0080e50b, 0x00000005 }, + { 0x00220000, 0x00000004 }, + { 0x000700c7, 0x00000004 }, + { 0x000000a4, 0x00000038 }, + { 0x0080e5bd, 0x00000005 }, + { 0x0000e5bb, 0x00000005 }, + { 0x0080e5bc, 0x00000005 }, + { 0x00210000, 0x00000004 }, + { 0x02800000, 0x00000004 }, + { 0x00c000ab, 0x00000018 }, + { 0x4180e000, 0x00000040 }, + { 0x000000ad, 0x00000024 }, + { 0x01000000, 0x0000000c }, + { 0x0100e51d, 0x0000000c }, + { 0x000045bb, 0x00000004 }, + { 0x000080a7, 0x00000008 }, + { 0x0000f3ce, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053cf, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f3d2, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053d3, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f39d, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c0539e, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x03c00830, 0x00000004 }, + { 0x4200e000, 0000000000 }, + { 0x0000a000, 0x00000004 }, + { 0x200045e0, 0x00000004 }, + { 0x0000e5e1, 0000000000 }, + { 0x00000001, 0000000000 }, + { 0x000700c4, 0x00000004 }, + { 0x0800e394, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x0000e8c4, 0x00000004 }, + { 0x0000e8c5, 0x00000004 }, + { 0x0000e8c6, 0x00000004 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000c8, 0x00000008 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000cf, 0x00000008 }, + { 0xdeadbeef, 0000000000 }, + { 0x00000116, 0000000000 }, + { 0x000700d3, 0x00000004 }, + { 0x080050e7, 0x00000004 }, + { 0x000700d4, 0x00000004 }, + { 0x0800401c, 0x00000004 }, + { 0x0000e01d, 0000000000 }, + { 0x02c02000, 0x00000004 }, + { 0x00060000, 0x00000004 }, + { 0x000000de, 0x00000034 }, + { 0x000000db, 0x00000008 }, + { 0x00008000, 0x00000004 }, + { 0xc000e000, 0000000000 }, + { 0x0000e1cc, 0x00000004 }, + { 0x0500e1cd, 0x00000004 }, + { 0x000ca000, 0x00000004 }, + { 0x000000e5, 0x00000034 }, + { 0x000000e1, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x0019e1cc, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x0500a000, 0x00000004 }, + { 0x080041cd, 0x00000004 }, + { 0x000ca000, 0x00000004 }, + { 0x000000fb, 0x00000034 }, + { 0x0000004a, 0x00000008 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x001d0018, 0x00000004 }, + { 0x001a0001, 0x00000004 }, + { 0x000000fb, 0x00000034 }, + { 0x0000004a, 0x00000008 }, + { 0x0500a04a, 0x00000008 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, +}; + + +#endif -- cgit v1.2.3 From fa0d71b967506031f7cb08ced6095d1c4f988594 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 28 May 2008 11:27:01 +1000 Subject: drm/rs690: set all of gart base address. Docs state bits 4-11 maps to bits 32-39 of the 40-bit range Signed-off-by: Dave Airlie --- drivers/char/drm/radeon_cp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index d8ede40de0b0..1e434ba15564 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -659,8 +659,9 @@ static void radeon_set_rs690gart(drm_radeon_private_t *dev_priv, int on) temp = RS690_READ_MCIND(dev_priv, RS690_MC_GART_FEATURE_ID); RS690_WRITE_MCIND(RS690_MC_GART_FEATURE_ID, 0x42040800); - RS690_WRITE_MCIND(RS690_MC_GART_BASE, - dev_priv->gart_info.bus_addr); + temp = dev_priv->gart_info.bus_addr & 0xfffff000; + temp |= (upper_32_bits(dev_priv->gart_info.bus_addr) & 0xff) << 4; + RS690_WRITE_MCIND(RS690_MC_GART_BASE, temp); temp = RS690_READ_MCIND(dev_priv, RS690_MC_AGP_MODE_CONTROL); RS690_WRITE_MCIND(RS690_MC_AGP_MODE_CONTROL, 0x01400000); -- cgit v1.2.3 From 3722bfc607d46275369865c02fe8694486d640b5 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 28 May 2008 11:28:27 +1000 Subject: drm/rs690: set base 2 to 0. Signed-off-by: Dave Airlie --- drivers/char/drm/radeon_cp.c | 2 ++ drivers/char/drm/radeon_drv.h | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 1e434ba15564..6e13f4bec917 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -669,6 +669,8 @@ static void radeon_set_rs690gart(drm_radeon_private_t *dev_priv, int on) RS690_WRITE_MCIND(RS690_MC_AGP_BASE, (unsigned int)dev_priv->gart_vm_start); + RS690_WRITE_MCIND(RS690_MC_AGP_BASE_2, 0); + dev_priv->gart_size = 32*1024*1024; temp = (((dev_priv->gart_vm_start - 1 + dev_priv->gart_size) & 0xffff0000) | (dev_priv->gart_vm_start >> 16)); diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index 173ae620223a..b22816b57659 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -497,6 +497,7 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RS690_MC_FB_LOCATION 0x100 #define RS690_MC_AGP_LOCATION 0x101 #define RS690_MC_AGP_BASE 0x102 +#define RS690_MC_AGP_BASE_2 0x103 #define R520_MC_IND_INDEX 0x70 #define R520_MC_IND_WR_EN (1<<24) -- cgit v1.2.3 From 2735977b12cb0f113aae24afff04747b6d0f5bf1 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 May 2008 12:54:16 +1000 Subject: drm/radeon: IGP clean up register and magic numbers. Signed-off-by: Dave Airlie --- drivers/char/drm/radeon_cp.c | 79 ++++++++++++++++------------- drivers/char/drm/radeon_drv.h | 113 ++++++++++++++++++++++++------------------ 2 files changed, 110 insertions(+), 82 deletions(-) diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 6e13f4bec917..38eda336a657 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -109,9 +109,9 @@ static u32 RADEON_READ_PCIE(drm_radeon_private_t *dev_priv, int addr) static u32 RADEON_READ_IGPGART(drm_radeon_private_t *dev_priv, int addr) { u32 ret; - RADEON_WRITE(RADEON_IGPGART_INDEX, addr & 0x7f); - ret = RADEON_READ(RADEON_IGPGART_DATA); - RADEON_WRITE(RADEON_IGPGART_INDEX, 0x7f); + RADEON_WRITE(RS400_NB_MC_INDEX, addr & 0x7f); + ret = RADEON_READ(RS400_NB_MC_DATA); + RADEON_WRITE(RS400_NB_MC_INDEX, 0x7f); return ret; } @@ -613,14 +613,18 @@ static void radeon_set_igpgart(drm_radeon_private_t * dev_priv, int on) (long)dev_priv->gart_info.bus_addr, dev_priv->gart_size); - RADEON_WRITE_IGPGART(RADEON_IGPGART_UNK_18, 0x1000); - RADEON_WRITE_IGPGART(RADEON_IGPGART_ENABLE, 0x1); - RADEON_WRITE_IGPGART(RADEON_IGPGART_CTRL, 0x42040800); - RADEON_WRITE_IGPGART(RADEON_IGPGART_BASE_ADDR, + RADEON_WRITE_IGPGART(RS400_MC_MISC_CNTL, RS400_GART_INDEX_REG_EN); + RADEON_WRITE_IGPGART(RS400_AGP_ADDRESS_SPACE_SIZE, (RS400_GART_EN | + RS400_VA_SIZE_32MB)); + RADEON_WRITE_IGPGART(RS400_GART_FEATURE_ID, (RS400_HANG_EN | + RS400_TLB_ENABLE | + RS400_GTW_LAC_EN | + RS400_1LEVEL_GART)); + RADEON_WRITE_IGPGART(RS400_GART_BASE, dev_priv->gart_info.bus_addr); - temp = RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_UNK_39); - RADEON_WRITE_IGPGART(RADEON_IGPGART_UNK_39, temp); + temp = RADEON_READ_IGPGART(dev_priv, RS400_AGP_MODE_CNTL); + RADEON_WRITE_IGPGART(RS400_AGP_MODE_CNTL, temp); RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev_priv->gart_vm_start); dev_priv->gart_size = 32*1024*1024; @@ -629,13 +633,13 @@ static void radeon_set_igpgart(drm_radeon_private_t * dev_priv, int on) dev_priv->gart_size) & 0xffff0000) | (dev_priv->gart_vm_start >> 16))); - temp = RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_ENABLE); - RADEON_WRITE_IGPGART(RADEON_IGPGART_ENABLE, temp); + temp = RADEON_READ_IGPGART(dev_priv, RS400_AGP_ADDRESS_SPACE_SIZE); + RADEON_WRITE_IGPGART(RS400_AGP_ADDRESS_SPACE_SIZE, temp); - RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_FLUSH); - RADEON_WRITE_IGPGART(RADEON_IGPGART_FLUSH, 0x1); - RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_FLUSH); - RADEON_WRITE_IGPGART(RADEON_IGPGART_FLUSH, 0x0); + RADEON_READ_IGPGART(dev_priv, RS400_GART_CACHE_CNTRL); + RADEON_WRITE_IGPGART(RS400_GART_CACHE_CNTRL, RS400_GART_CACHE_INVALIDATE); + RADEON_READ_IGPGART(dev_priv, RS400_GART_CACHE_CNTRL); + RADEON_WRITE_IGPGART(RS400_GART_CACHE_CNTRL, 0); } } @@ -650,21 +654,26 @@ static void radeon_set_rs690gart(drm_radeon_private_t *dev_priv, int on) (long)dev_priv->gart_info.bus_addr, dev_priv->gart_size); - temp = RS690_READ_MCIND(dev_priv, RS690_MC_MISC_CNTL); - RS690_WRITE_MCIND(RS690_MC_MISC_CNTL, 0x5000); + temp = RS690_READ_MCIND(dev_priv, RS400_MC_MISC_CNTL); + RS690_WRITE_MCIND(RS400_MC_MISC_CNTL, (RS400_GART_INDEX_REG_EN | + RS690_BLOCK_GFX_D3_EN)); - RS690_WRITE_MCIND(RS690_MC_AGP_SIZE, - RS690_MC_GART_EN | RS690_MC_AGP_SIZE_32MB); + RS690_WRITE_MCIND(RS400_AGP_ADDRESS_SPACE_SIZE, (RS400_GART_EN | + RS400_VA_SIZE_32MB)); - temp = RS690_READ_MCIND(dev_priv, RS690_MC_GART_FEATURE_ID); - RS690_WRITE_MCIND(RS690_MC_GART_FEATURE_ID, 0x42040800); + temp = RS690_READ_MCIND(dev_priv, RS400_GART_FEATURE_ID); + RS690_WRITE_MCIND(RS400_GART_FEATURE_ID, (RS400_HANG_EN | + RS400_TLB_ENABLE | + RS400_GTW_LAC_EN | + RS400_1LEVEL_GART)); temp = dev_priv->gart_info.bus_addr & 0xfffff000; temp |= (upper_32_bits(dev_priv->gart_info.bus_addr) & 0xff) << 4; - RS690_WRITE_MCIND(RS690_MC_GART_BASE, temp); + RS690_WRITE_MCIND(RS400_GART_BASE, temp); - temp = RS690_READ_MCIND(dev_priv, RS690_MC_AGP_MODE_CONTROL); - RS690_WRITE_MCIND(RS690_MC_AGP_MODE_CONTROL, 0x01400000); + temp = RS690_READ_MCIND(dev_priv, RS400_AGP_MODE_CNTL); + RS690_WRITE_MCIND(RS400_AGP_MODE_CNTL, ((1 << RS400_REQ_TYPE_SNOOP_SHIFT) | + RS400_REQ_TYPE_SNOOP_DIS)); RS690_WRITE_MCIND(RS690_MC_AGP_BASE, (unsigned int)dev_priv->gart_vm_start); @@ -677,32 +686,32 @@ static void radeon_set_rs690gart(drm_radeon_private_t *dev_priv, int on) RS690_WRITE_MCIND(RS690_MC_AGP_LOCATION, temp); - temp = RS690_READ_MCIND(dev_priv, RS690_MC_AGP_SIZE); - RS690_WRITE_MCIND(RS690_MC_AGP_SIZE, - RS690_MC_GART_EN | RS690_MC_AGP_SIZE_32MB); + temp = RS690_READ_MCIND(dev_priv, RS400_AGP_ADDRESS_SPACE_SIZE); + RS690_WRITE_MCIND(RS400_AGP_ADDRESS_SPACE_SIZE, (RS400_GART_EN | + RS400_VA_SIZE_32MB)); do { - temp = RS690_READ_MCIND(dev_priv, RS690_MC_GART_CACHE_CNTL); + temp = RS690_READ_MCIND(dev_priv, RS400_GART_CACHE_CNTRL); if ((temp & RS690_MC_GART_CLEAR_STATUS) == RS690_MC_GART_CLEAR_DONE) break; DRM_UDELAY(1); } while (1); - RS690_WRITE_MCIND(RS690_MC_GART_CACHE_CNTL, - RS690_MC_GART_CC_CLEAR); + RS690_WRITE_MCIND(RS400_GART_CACHE_CNTRL, + RS400_GART_CACHE_INVALIDATE); + do { - temp = RS690_READ_MCIND(dev_priv, RS690_MC_GART_CACHE_CNTL); + temp = RS690_READ_MCIND(dev_priv, RS400_GART_CACHE_CNTRL); if ((temp & RS690_MC_GART_CLEAR_STATUS) == - RS690_MC_GART_CLEAR_DONE) + RS690_MC_GART_CLEAR_DONE) break; DRM_UDELAY(1); } while (1); - RS690_WRITE_MCIND(RS690_MC_GART_CACHE_CNTL, - RS690_MC_GART_CC_NO_CHANGE); + RS690_WRITE_MCIND(RS400_GART_CACHE_CNTRL, 0); } else { - RS690_WRITE_MCIND(RS690_MC_AGP_SIZE, RS690_MC_GART_DIS); + RS690_WRITE_MCIND(RS400_AGP_ADDRESS_SPACE_SIZE, 0); } } diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index b22816b57659..f25933e9e56a 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -444,13 +444,13 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_PCIE_DATA 0x0034 #define RADEON_PCIE_TX_GART_CNTL 0x10 # define RADEON_PCIE_TX_GART_EN (1 << 0) -# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_PASS_THRU (0<<1) -# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_CLAMP_LO (1<<1) -# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD (3<<1) -# define RADEON_PCIE_TX_GART_MODE_32_128_CACHE (0<<3) -# define RADEON_PCIE_TX_GART_MODE_8_4_128_CACHE (1<<3) -# define RADEON_PCIE_TX_GART_CHK_RW_VALID_EN (1<<5) -# define RADEON_PCIE_TX_GART_INVALIDATE_TLB (1<<8) +# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_PASS_THRU (0 << 1) +# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_CLAMP_LO (1 << 1) +# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD (3 << 1) +# define RADEON_PCIE_TX_GART_MODE_32_128_CACHE (0 << 3) +# define RADEON_PCIE_TX_GART_MODE_8_4_128_CACHE (1 << 3) +# define RADEON_PCIE_TX_GART_CHK_RW_VALID_EN (1 << 5) +# define RADEON_PCIE_TX_GART_INVALIDATE_TLB (1 << 8) #define RADEON_PCIE_TX_DISCARD_RD_ADDR_LO 0x11 #define RADEON_PCIE_TX_DISCARD_RD_ADDR_HI 0x12 #define RADEON_PCIE_TX_GART_BASE 0x13 @@ -459,14 +459,9 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_PCIE_TX_GART_END_LO 0x16 #define RADEON_PCIE_TX_GART_END_HI 0x17 -#define RADEON_IGPGART_INDEX 0x168 -#define RADEON_IGPGART_DATA 0x16c -#define RADEON_IGPGART_UNK_18 0x18 -#define RADEON_IGPGART_CTRL 0x2b -#define RADEON_IGPGART_BASE_ADDR 0x2c -#define RADEON_IGPGART_FLUSH 0x2e -#define RADEON_IGPGART_ENABLE 0x38 -#define RADEON_IGPGART_UNK_39 0x39 +#define RS400_NB_MC_INDEX 0x168 +# define RS400_NB_MC_IND_WR_EN (1 << 8) +#define RS400_NB_MC_DATA 0x16c #define RS690_MC_INDEX 0x78 # define RS690_MC_INDEX_MASK 0x1ff @@ -474,33 +469,55 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, # define RS690_MC_INDEX_WR_ACK 0x7f #define RS690_MC_DATA 0x7c -#define RS690_MC_MISC_CNTL 0x18 -#define RS690_MC_GART_FEATURE_ID 0x2b -#define RS690_MC_GART_BASE 0x2c -#define RS690_MC_GART_CACHE_CNTL 0x2e -# define RS690_MC_GART_CC_NO_CHANGE 0x0 -# define RS690_MC_GART_CC_CLEAR 0x1 -# define RS690_MC_GART_CLEAR_STATUS (1 << 1) +/* MC indirect registers */ +#define RS400_MC_MISC_CNTL 0x18 +# define RS400_DISABLE_GTW (1 << 1) +/* switch between MCIND GART and MM GART registers. 0 = mmgart, 1 = mcind gart */ +# define RS400_GART_INDEX_REG_EN (1 << 12) +# define RS690_BLOCK_GFX_D3_EN (1 << 14) +#define RS400_K8_FB_LOCATION 0x1e +#define RS400_GART_FEATURE_ID 0x2b +# define RS400_HANG_EN (1 << 11) +# define RS400_TLB_ENABLE (1 << 18) +# define RS400_P2P_ENABLE (1 << 19) +# define RS400_GTW_LAC_EN (1 << 25) +# define RS400_2LEVEL_GART (0 << 30) +# define RS400_1LEVEL_GART (1 << 30) +# define RS400_PDC_EN (1 << 31) +#define RS400_GART_BASE 0x2c +#define RS400_GART_CACHE_CNTRL 0x2e +# define RS400_GART_CACHE_INVALIDATE (1 << 0) /* wait for it to clear */ +/* ??? */ +# define RS690_MC_GART_CLEAR_STATUS (1 << 1) # define RS690_MC_GART_CLEAR_DONE (0 << 1) # define RS690_MC_GART_CLEAR_PENDING (1 << 1) -#define RS690_MC_AGP_SIZE 0x38 -# define RS690_MC_GART_DIS 0x0 -# define RS690_MC_GART_EN 0x1 -# define RS690_MC_AGP_SIZE_32MB (0 << 1) -# define RS690_MC_AGP_SIZE_64MB (1 << 1) -# define RS690_MC_AGP_SIZE_128MB (2 << 1) -# define RS690_MC_AGP_SIZE_256MB (3 << 1) -# define RS690_MC_AGP_SIZE_512MB (4 << 1) -# define RS690_MC_AGP_SIZE_1GB (5 << 1) -# define RS690_MC_AGP_SIZE_2GB (6 << 1) -#define RS690_MC_AGP_MODE_CONTROL 0x39 +#define RS400_AGP_ADDRESS_SPACE_SIZE 0x38 +# define RS400_GART_EN (1 << 0) +# define RS400_VA_SIZE_32MB (0 << 1) +# define RS400_VA_SIZE_64MB (1 << 1) +# define RS400_VA_SIZE_128MB (2 << 1) +# define RS400_VA_SIZE_256MB (3 << 1) +# define RS400_VA_SIZE_512MB (4 << 1) +# define RS400_VA_SIZE_1GB (5 << 1) +# define RS400_VA_SIZE_2GB (6 << 1) +#define RS400_AGP_MODE_CNTL 0x39 +# define RS400_POST_GART_Q_SIZE (1 << 18) +# define RS400_NONGART_SNOOP (1 << 19) +# define RS400_AGP_RD_BUF_SIZE (1 << 20) +# define RS400_REQ_TYPE_SNOOP_SHIFT 22 +# define RS400_REQ_TYPE_SNOOP_MASK 0x3 +# define RS400_REQ_TYPE_SNOOP_DIS (1 << 24) +#define RS400_MC_MISC_UMA_CNTL 0x5f +#define RS400_MC_MCLK_CNTL 0x7a +#define RS400_MC_UMA_DUALCH_CNTL 0x86 + #define RS690_MC_FB_LOCATION 0x100 #define RS690_MC_AGP_LOCATION 0x101 #define RS690_MC_AGP_BASE 0x102 #define RS690_MC_AGP_BASE_2 0x103 #define R520_MC_IND_INDEX 0x70 -#define R520_MC_IND_WR_EN (1<<24) +#define R520_MC_IND_WR_EN (1 << 24) #define R520_MC_IND_DATA 0x74 #define RV515_MC_FB_LOCATION 0x01 @@ -512,6 +529,8 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_MPP_TB_CONFIG 0x01c0 #define RADEON_MEM_CNTL 0x0140 #define RADEON_MEM_SDRAM_MODE_REG 0x0158 +#define RADEON_AGP_BASE_2 0x015c +#define RS400_AGP_BASE_2 0x0164 #define RADEON_AGP_BASE 0x0170 #define RADEON_RB3D_COLOROFFSET 0x1c40 @@ -1079,36 +1098,36 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_READ8(reg) DRM_READ8( dev_priv->mmio, (reg) ) #define RADEON_WRITE8(reg,val) DRM_WRITE8( dev_priv->mmio, (reg), (val) ) -#define RADEON_WRITE_PLL( addr, val ) \ +#define RADEON_WRITE_PLL(addr, val) \ do { \ - RADEON_WRITE8( RADEON_CLOCK_CNTL_INDEX, \ + RADEON_WRITE8(RADEON_CLOCK_CNTL_INDEX, \ ((addr) & 0x1f) | RADEON_PLL_WR_EN ); \ - RADEON_WRITE( RADEON_CLOCK_CNTL_DATA, (val) ); \ + RADEON_WRITE(RADEON_CLOCK_CNTL_DATA, (val)); \ } while (0) -#define RADEON_WRITE_IGPGART( addr, val ) \ +#define RADEON_WRITE_IGPGART(addr, val) \ do { \ - RADEON_WRITE( RADEON_IGPGART_INDEX, \ - ((addr) & 0x7f) | (1 << 8)); \ - RADEON_WRITE( RADEON_IGPGART_DATA, (val) ); \ - RADEON_WRITE( RADEON_IGPGART_INDEX, 0x7f ); \ + RADEON_WRITE(RS400_NB_MC_INDEX, \ + ((addr) & 0x7f) | RS400_NB_MC_IND_WR_EN); \ + RADEON_WRITE(RS400_NB_MC_DATA, (val)); \ + RADEON_WRITE(RS400_NB_MC_INDEX, 0x7f); \ } while (0) -#define RADEON_WRITE_PCIE( addr, val ) \ +#define RADEON_WRITE_PCIE(addr, val) \ do { \ - RADEON_WRITE8( RADEON_PCIE_INDEX, \ + RADEON_WRITE8(RADEON_PCIE_INDEX, \ ((addr) & 0xff)); \ - RADEON_WRITE( RADEON_PCIE_DATA, (val) ); \ + RADEON_WRITE(RADEON_PCIE_DATA, (val)); \ } while (0) -#define RADEON_WRITE_MCIND( addr, val ) \ +#define RADEON_WRITE_MCIND(addr, val) \ do { \ RADEON_WRITE(R520_MC_IND_INDEX, 0xff0000 | ((addr) & 0xff)); \ RADEON_WRITE(R520_MC_IND_DATA, (val)); \ RADEON_WRITE(R520_MC_IND_INDEX, 0); \ } while (0) -#define RS690_WRITE_MCIND( addr, val ) \ +#define RS690_WRITE_MCIND(addr, val) \ do { \ RADEON_WRITE(RS690_MC_INDEX, RS690_MC_INDEX_WR_EN | ((addr) & RS690_MC_INDEX_MASK)); \ RADEON_WRITE(RS690_MC_DATA, val); \ -- cgit v1.2.3 From 45e519052e8f583a709edd442a23f59581d3fe42 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 May 2008 13:28:59 +1000 Subject: drm/radeon: merge IGP chip setup and fixup RS400 vs RS480 support We only support RS480 (AMD based IGP) at the moment not RS400 (Intel based IGP) ones. Signed-off-by: Dave Airlie --- drivers/char/drm/drm_pciids.h | 14 ++-- drivers/char/drm/radeon_cp.c | 169 +++++++++++++++++------------------------- drivers/char/drm/radeon_drv.h | 120 +++++++++++++++--------------- 3 files changed, 138 insertions(+), 165 deletions(-) diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h index a6a499f97e22..bad096f896ad 100644 --- a/drivers/char/drm/drm_pciids.h +++ b/drivers/char/drm/drm_pciids.h @@ -103,20 +103,18 @@ {0x1002, 0x5653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x5834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP}, \ {0x1002, 0x5835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \ - {0x1002, 0x5954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ - {0x1002, 0x5955, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ - {0x1002, 0x5974, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ - {0x1002, 0x5975, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ + {0x1002, 0x5954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ + {0x1002, 0x5955, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ + {0x1002, 0x5974, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ + {0x1002, 0x5975, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ {0x1002, 0x5960, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \ {0x1002, 0x5961, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \ {0x1002, 0x5962, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \ {0x1002, 0x5964, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \ {0x1002, 0x5965, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \ {0x1002, 0x5969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \ - {0x1002, 0x5a41, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ - {0x1002, 0x5a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ - {0x1002, 0x5a61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ - {0x1002, 0x5a62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ + {0x1002, 0x5a61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ + {0x1002, 0x5a62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ {0x1002, 0x5b60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \ {0x1002, 0x5b62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \ {0x1002, 0x5b63, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \ diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 38eda336a657..3a424986e85e 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -2,6 +2,7 @@ /* * Copyright 2000 Precision Insight, Inc., Cedar Park, Texas. * Copyright 2000 VA Linux Systems, Inc., Fremont, California. + * Copyright 2007 Advanced Micro Devices, Inc. * All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a @@ -40,7 +41,7 @@ static int radeon_do_cleanup_cp(struct drm_device * dev); -static u32 RADEON_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) +static u32 R500_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) { u32 ret; RADEON_WRITE(R520_MC_IND_INDEX, 0x7f0000 | (addr & 0xff)); @@ -49,21 +50,41 @@ static u32 RADEON_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) return ret; } +static u32 RS480_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) +{ + u32 ret; + RADEON_WRITE(RS480_NB_MC_INDEX, addr & 0xff); + ret = RADEON_READ(RS480_NB_MC_DATA); + RADEON_WRITE(RS480_NB_MC_INDEX, 0xff); + return ret; +} + static u32 RS690_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) { + u32 ret; RADEON_WRITE(RS690_MC_INDEX, (addr & RS690_MC_INDEX_MASK)); - return RADEON_READ(RS690_MC_DATA); + ret = RADEON_READ(RS690_MC_DATA); + RADEON_WRITE(RS690_MC_INDEX, RS690_MC_INDEX_MASK); + return ret; +} + +static u32 IGP_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) +{ + if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) + return RS690_READ_MCIND(dev_priv, addr); + else + return RS480_READ_MCIND(dev_priv, addr); } u32 radeon_read_fb_location(drm_radeon_private_t *dev_priv) { if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) - return RADEON_READ_MCIND(dev_priv, RV515_MC_FB_LOCATION); + return R500_READ_MCIND(dev_priv, RV515_MC_FB_LOCATION); else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) return RS690_READ_MCIND(dev_priv, RS690_MC_FB_LOCATION); else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) - return RADEON_READ_MCIND(dev_priv, R520_MC_FB_LOCATION); + return R500_READ_MCIND(dev_priv, R520_MC_FB_LOCATION); else return RADEON_READ(RADEON_MC_FB_LOCATION); } @@ -71,11 +92,11 @@ u32 radeon_read_fb_location(drm_radeon_private_t *dev_priv) static void radeon_write_fb_location(drm_radeon_private_t *dev_priv, u32 fb_loc) { if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) - RADEON_WRITE_MCIND(RV515_MC_FB_LOCATION, fb_loc); + R500_WRITE_MCIND(RV515_MC_FB_LOCATION, fb_loc); else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) RS690_WRITE_MCIND(RS690_MC_FB_LOCATION, fb_loc); else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) - RADEON_WRITE_MCIND(R520_MC_FB_LOCATION, fb_loc); + R500_WRITE_MCIND(R520_MC_FB_LOCATION, fb_loc); else RADEON_WRITE(RADEON_MC_FB_LOCATION, fb_loc); } @@ -83,11 +104,11 @@ static void radeon_write_fb_location(drm_radeon_private_t *dev_priv, u32 fb_loc) static void radeon_write_agp_location(drm_radeon_private_t *dev_priv, u32 agp_loc) { if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) - RADEON_WRITE_MCIND(RV515_MC_AGP_LOCATION, agp_loc); + R500_WRITE_MCIND(RV515_MC_AGP_LOCATION, agp_loc); else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) RS690_WRITE_MCIND(RS690_MC_AGP_LOCATION, agp_loc); else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) - RADEON_WRITE_MCIND(R520_MC_AGP_LOCATION, agp_loc); + R500_WRITE_MCIND(R520_MC_AGP_LOCATION, agp_loc); else RADEON_WRITE(RADEON_MC_AGP_LOCATION, agp_loc); } @@ -106,15 +127,6 @@ static u32 RADEON_READ_PCIE(drm_radeon_private_t *dev_priv, int addr) return RADEON_READ(RADEON_PCIE_DATA); } -static u32 RADEON_READ_IGPGART(drm_radeon_private_t *dev_priv, int addr) -{ - u32 ret; - RADEON_WRITE(RS400_NB_MC_INDEX, addr & 0x7f); - ret = RADEON_READ(RS400_NB_MC_DATA); - RADEON_WRITE(RS400_NB_MC_INDEX, 0x7f); - return ret; -} - #if RADEON_FIFO_DEBUG static void radeon_status(drm_radeon_private_t * dev_priv) { @@ -255,7 +267,7 @@ static void radeon_cp_load_microcode(drm_radeon_private_t * dev_priv) ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R350) || ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV350) || ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV380) || - ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS400)) { + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS480)) { DRM_INFO("Loading R300 Microcode\n"); for (i = 0; i < 256; i++) { RADEON_WRITE(RADEON_CP_ME_RAM_DATAH, @@ -603,115 +615,78 @@ static void radeon_test_writeback(drm_radeon_private_t * dev_priv) /* Enable or disable IGP GART on the chip */ static void radeon_set_igpgart(drm_radeon_private_t * dev_priv, int on) -{ - u32 temp, tmp; - - tmp = RADEON_READ(RADEON_AIC_CNTL); - if (on) { - DRM_DEBUG("programming igpgart %08X %08lX %08X\n", - dev_priv->gart_vm_start, - (long)dev_priv->gart_info.bus_addr, - dev_priv->gart_size); - - RADEON_WRITE_IGPGART(RS400_MC_MISC_CNTL, RS400_GART_INDEX_REG_EN); - RADEON_WRITE_IGPGART(RS400_AGP_ADDRESS_SPACE_SIZE, (RS400_GART_EN | - RS400_VA_SIZE_32MB)); - RADEON_WRITE_IGPGART(RS400_GART_FEATURE_ID, (RS400_HANG_EN | - RS400_TLB_ENABLE | - RS400_GTW_LAC_EN | - RS400_1LEVEL_GART)); - RADEON_WRITE_IGPGART(RS400_GART_BASE, - dev_priv->gart_info.bus_addr); - - temp = RADEON_READ_IGPGART(dev_priv, RS400_AGP_MODE_CNTL); - RADEON_WRITE_IGPGART(RS400_AGP_MODE_CNTL, temp); - - RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev_priv->gart_vm_start); - dev_priv->gart_size = 32*1024*1024; - radeon_write_agp_location(dev_priv, - (((dev_priv->gart_vm_start - 1 + - dev_priv->gart_size) & 0xffff0000) | - (dev_priv->gart_vm_start >> 16))); - - temp = RADEON_READ_IGPGART(dev_priv, RS400_AGP_ADDRESS_SPACE_SIZE); - RADEON_WRITE_IGPGART(RS400_AGP_ADDRESS_SPACE_SIZE, temp); - - RADEON_READ_IGPGART(dev_priv, RS400_GART_CACHE_CNTRL); - RADEON_WRITE_IGPGART(RS400_GART_CACHE_CNTRL, RS400_GART_CACHE_INVALIDATE); - RADEON_READ_IGPGART(dev_priv, RS400_GART_CACHE_CNTRL); - RADEON_WRITE_IGPGART(RS400_GART_CACHE_CNTRL, 0); - } -} - -/* Enable or disable RS690 GART on the chip */ -static void radeon_set_rs690gart(drm_radeon_private_t *dev_priv, int on) { u32 temp; if (on) { - DRM_DEBUG("programming rs690 gart %08X %08lX %08X\n", + DRM_DEBUG("programming igp gart %08X %08lX %08X\n", dev_priv->gart_vm_start, (long)dev_priv->gart_info.bus_addr, dev_priv->gart_size); - temp = RS690_READ_MCIND(dev_priv, RS400_MC_MISC_CNTL); - RS690_WRITE_MCIND(RS400_MC_MISC_CNTL, (RS400_GART_INDEX_REG_EN | - RS690_BLOCK_GFX_D3_EN)); + temp = IGP_READ_MCIND(dev_priv, RS480_MC_MISC_CNTL); + if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) + IGP_WRITE_MCIND(RS480_MC_MISC_CNTL, (RS480_GART_INDEX_REG_EN | + RS690_BLOCK_GFX_D3_EN)); + else + IGP_WRITE_MCIND(RS480_MC_MISC_CNTL, RS480_GART_INDEX_REG_EN); - RS690_WRITE_MCIND(RS400_AGP_ADDRESS_SPACE_SIZE, (RS400_GART_EN | - RS400_VA_SIZE_32MB)); + IGP_WRITE_MCIND(RS480_AGP_ADDRESS_SPACE_SIZE, (RS480_GART_EN | + RS480_VA_SIZE_32MB)); - temp = RS690_READ_MCIND(dev_priv, RS400_GART_FEATURE_ID); - RS690_WRITE_MCIND(RS400_GART_FEATURE_ID, (RS400_HANG_EN | - RS400_TLB_ENABLE | - RS400_GTW_LAC_EN | - RS400_1LEVEL_GART)); + temp = IGP_READ_MCIND(dev_priv, RS480_GART_FEATURE_ID); + IGP_WRITE_MCIND(RS480_GART_FEATURE_ID, (RS480_HANG_EN | + RS480_TLB_ENABLE | + RS480_GTW_LAC_EN | + RS480_1LEVEL_GART)); temp = dev_priv->gart_info.bus_addr & 0xfffff000; temp |= (upper_32_bits(dev_priv->gart_info.bus_addr) & 0xff) << 4; - RS690_WRITE_MCIND(RS400_GART_BASE, temp); + IGP_WRITE_MCIND(RS480_GART_BASE, temp); - temp = RS690_READ_MCIND(dev_priv, RS400_AGP_MODE_CNTL); - RS690_WRITE_MCIND(RS400_AGP_MODE_CNTL, ((1 << RS400_REQ_TYPE_SNOOP_SHIFT) | - RS400_REQ_TYPE_SNOOP_DIS)); + temp = IGP_READ_MCIND(dev_priv, RS480_AGP_MODE_CNTL); + IGP_WRITE_MCIND(RS480_AGP_MODE_CNTL, ((1 << RS480_REQ_TYPE_SNOOP_SHIFT) | + RS480_REQ_TYPE_SNOOP_DIS)); - RS690_WRITE_MCIND(RS690_MC_AGP_BASE, - (unsigned int)dev_priv->gart_vm_start); - - RS690_WRITE_MCIND(RS690_MC_AGP_BASE_2, 0); + if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) { + IGP_WRITE_MCIND(RS690_MC_AGP_BASE, + (unsigned int)dev_priv->gart_vm_start); + IGP_WRITE_MCIND(RS690_MC_AGP_BASE_2, 0); + } else { + RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev_priv->gart_vm_start); + RADEON_WRITE(RS480_AGP_BASE_2, 0); + } dev_priv->gart_size = 32*1024*1024; temp = (((dev_priv->gart_vm_start - 1 + dev_priv->gart_size) & 0xffff0000) | (dev_priv->gart_vm_start >> 16)); - RS690_WRITE_MCIND(RS690_MC_AGP_LOCATION, temp); + radeon_write_agp_location(dev_priv, temp); - temp = RS690_READ_MCIND(dev_priv, RS400_AGP_ADDRESS_SPACE_SIZE); - RS690_WRITE_MCIND(RS400_AGP_ADDRESS_SPACE_SIZE, (RS400_GART_EN | - RS400_VA_SIZE_32MB)); + temp = IGP_READ_MCIND(dev_priv, RS480_AGP_ADDRESS_SPACE_SIZE); + IGP_WRITE_MCIND(RS480_AGP_ADDRESS_SPACE_SIZE, (RS480_GART_EN | + RS480_VA_SIZE_32MB)); do { - temp = RS690_READ_MCIND(dev_priv, RS400_GART_CACHE_CNTRL); - if ((temp & RS690_MC_GART_CLEAR_STATUS) == - RS690_MC_GART_CLEAR_DONE) + temp = IGP_READ_MCIND(dev_priv, RS480_GART_CACHE_CNTRL); + if ((temp & RS480_GART_CACHE_INVALIDATE) == 0) break; DRM_UDELAY(1); } while (1); - RS690_WRITE_MCIND(RS400_GART_CACHE_CNTRL, - RS400_GART_CACHE_INVALIDATE); + IGP_WRITE_MCIND(RS480_GART_CACHE_CNTRL, + RS480_GART_CACHE_INVALIDATE); do { - temp = RS690_READ_MCIND(dev_priv, RS400_GART_CACHE_CNTRL); - if ((temp & RS690_MC_GART_CLEAR_STATUS) == - RS690_MC_GART_CLEAR_DONE) + temp = IGP_READ_MCIND(dev_priv, RS480_GART_CACHE_CNTRL); + if ((temp & RS480_GART_CACHE_INVALIDATE) == 0) break; DRM_UDELAY(1); } while (1); - RS690_WRITE_MCIND(RS400_GART_CACHE_CNTRL, 0); + IGP_WRITE_MCIND(RS480_GART_CACHE_CNTRL, 0); } else { - RS690_WRITE_MCIND(RS400_AGP_ADDRESS_SPACE_SIZE, 0); + IGP_WRITE_MCIND(RS480_AGP_ADDRESS_SPACE_SIZE, 0); } } @@ -749,12 +724,8 @@ static void radeon_set_pcigart(drm_radeon_private_t * dev_priv, int on) { u32 tmp; - if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) { - radeon_set_rs690gart(dev_priv, on); - return; - } - - if (dev_priv->flags & RADEON_IS_IGPGART) { + if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) || + (dev_priv->flags & RADEON_IS_IGPGART)) { radeon_set_igpgart(dev_priv, on); return; } diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index f25933e9e56a..3063b0fa512f 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -122,7 +122,7 @@ enum radeon_family { CHIP_RV380, CHIP_R420, CHIP_RV410, - CHIP_RS400, + CHIP_RS480, CHIP_RS690, CHIP_RV515, CHIP_R520, @@ -459,9 +459,9 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_PCIE_TX_GART_END_LO 0x16 #define RADEON_PCIE_TX_GART_END_HI 0x17 -#define RS400_NB_MC_INDEX 0x168 -# define RS400_NB_MC_IND_WR_EN (1 << 8) -#define RS400_NB_MC_DATA 0x16c +#define RS480_NB_MC_INDEX 0x168 +# define RS480_NB_MC_IND_WR_EN (1 << 8) +#define RS480_NB_MC_DATA 0x16c #define RS690_MC_INDEX 0x78 # define RS690_MC_INDEX_MASK 0x1ff @@ -470,46 +470,42 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RS690_MC_DATA 0x7c /* MC indirect registers */ -#define RS400_MC_MISC_CNTL 0x18 -# define RS400_DISABLE_GTW (1 << 1) +#define RS480_MC_MISC_CNTL 0x18 +# define RS480_DISABLE_GTW (1 << 1) /* switch between MCIND GART and MM GART registers. 0 = mmgart, 1 = mcind gart */ -# define RS400_GART_INDEX_REG_EN (1 << 12) +# define RS480_GART_INDEX_REG_EN (1 << 12) # define RS690_BLOCK_GFX_D3_EN (1 << 14) -#define RS400_K8_FB_LOCATION 0x1e -#define RS400_GART_FEATURE_ID 0x2b -# define RS400_HANG_EN (1 << 11) -# define RS400_TLB_ENABLE (1 << 18) -# define RS400_P2P_ENABLE (1 << 19) -# define RS400_GTW_LAC_EN (1 << 25) -# define RS400_2LEVEL_GART (0 << 30) -# define RS400_1LEVEL_GART (1 << 30) -# define RS400_PDC_EN (1 << 31) -#define RS400_GART_BASE 0x2c -#define RS400_GART_CACHE_CNTRL 0x2e -# define RS400_GART_CACHE_INVALIDATE (1 << 0) /* wait for it to clear */ -/* ??? */ -# define RS690_MC_GART_CLEAR_STATUS (1 << 1) -# define RS690_MC_GART_CLEAR_DONE (0 << 1) -# define RS690_MC_GART_CLEAR_PENDING (1 << 1) -#define RS400_AGP_ADDRESS_SPACE_SIZE 0x38 -# define RS400_GART_EN (1 << 0) -# define RS400_VA_SIZE_32MB (0 << 1) -# define RS400_VA_SIZE_64MB (1 << 1) -# define RS400_VA_SIZE_128MB (2 << 1) -# define RS400_VA_SIZE_256MB (3 << 1) -# define RS400_VA_SIZE_512MB (4 << 1) -# define RS400_VA_SIZE_1GB (5 << 1) -# define RS400_VA_SIZE_2GB (6 << 1) -#define RS400_AGP_MODE_CNTL 0x39 -# define RS400_POST_GART_Q_SIZE (1 << 18) -# define RS400_NONGART_SNOOP (1 << 19) -# define RS400_AGP_RD_BUF_SIZE (1 << 20) -# define RS400_REQ_TYPE_SNOOP_SHIFT 22 -# define RS400_REQ_TYPE_SNOOP_MASK 0x3 -# define RS400_REQ_TYPE_SNOOP_DIS (1 << 24) -#define RS400_MC_MISC_UMA_CNTL 0x5f -#define RS400_MC_MCLK_CNTL 0x7a -#define RS400_MC_UMA_DUALCH_CNTL 0x86 +#define RS480_K8_FB_LOCATION 0x1e +#define RS480_GART_FEATURE_ID 0x2b +# define RS480_HANG_EN (1 << 11) +# define RS480_TLB_ENABLE (1 << 18) +# define RS480_P2P_ENABLE (1 << 19) +# define RS480_GTW_LAC_EN (1 << 25) +# define RS480_2LEVEL_GART (0 << 30) +# define RS480_1LEVEL_GART (1 << 30) +# define RS480_PDC_EN (1 << 31) +#define RS480_GART_BASE 0x2c +#define RS480_GART_CACHE_CNTRL 0x2e +# define RS480_GART_CACHE_INVALIDATE (1 << 0) /* wait for it to clear */ +#define RS480_AGP_ADDRESS_SPACE_SIZE 0x38 +# define RS480_GART_EN (1 << 0) +# define RS480_VA_SIZE_32MB (0 << 1) +# define RS480_VA_SIZE_64MB (1 << 1) +# define RS480_VA_SIZE_128MB (2 << 1) +# define RS480_VA_SIZE_256MB (3 << 1) +# define RS480_VA_SIZE_512MB (4 << 1) +# define RS480_VA_SIZE_1GB (5 << 1) +# define RS480_VA_SIZE_2GB (6 << 1) +#define RS480_AGP_MODE_CNTL 0x39 +# define RS480_POST_GART_Q_SIZE (1 << 18) +# define RS480_NONGART_SNOOP (1 << 19) +# define RS480_AGP_RD_BUF_SIZE (1 << 20) +# define RS480_REQ_TYPE_SNOOP_SHIFT 22 +# define RS480_REQ_TYPE_SNOOP_MASK 0x3 +# define RS480_REQ_TYPE_SNOOP_DIS (1 << 24) +#define RS480_MC_MISC_UMA_CNTL 0x5f +#define RS480_MC_MCLK_CNTL 0x7a +#define RS480_MC_UMA_DUALCH_CNTL 0x86 #define RS690_MC_FB_LOCATION 0x100 #define RS690_MC_AGP_LOCATION 0x101 @@ -529,8 +525,8 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_MPP_TB_CONFIG 0x01c0 #define RADEON_MEM_CNTL 0x0140 #define RADEON_MEM_SDRAM_MODE_REG 0x0158 -#define RADEON_AGP_BASE_2 0x015c -#define RS400_AGP_BASE_2 0x0164 +#define RADEON_AGP_BASE_2 0x015c /* r200+ only */ +#define RS480_AGP_BASE_2 0x0164 #define RADEON_AGP_BASE 0x0170 #define RADEON_RB3D_COLOROFFSET 0x1c40 @@ -1105,14 +1101,6 @@ do { \ RADEON_WRITE(RADEON_CLOCK_CNTL_DATA, (val)); \ } while (0) -#define RADEON_WRITE_IGPGART(addr, val) \ -do { \ - RADEON_WRITE(RS400_NB_MC_INDEX, \ - ((addr) & 0x7f) | RS400_NB_MC_IND_WR_EN); \ - RADEON_WRITE(RS400_NB_MC_DATA, (val)); \ - RADEON_WRITE(RS400_NB_MC_INDEX, 0x7f); \ -} while (0) - #define RADEON_WRITE_PCIE(addr, val) \ do { \ RADEON_WRITE8(RADEON_PCIE_INDEX, \ @@ -1120,12 +1108,20 @@ do { \ RADEON_WRITE(RADEON_PCIE_DATA, (val)); \ } while (0) -#define RADEON_WRITE_MCIND(addr, val) \ - do { \ - RADEON_WRITE(R520_MC_IND_INDEX, 0xff0000 | ((addr) & 0xff)); \ - RADEON_WRITE(R520_MC_IND_DATA, (val)); \ - RADEON_WRITE(R520_MC_IND_INDEX, 0); \ - } while (0) +#define R500_WRITE_MCIND(addr, val) \ +do { \ + RADEON_WRITE(R520_MC_IND_INDEX, 0xff0000 | ((addr) & 0xff)); \ + RADEON_WRITE(R520_MC_IND_DATA, (val)); \ + RADEON_WRITE(R520_MC_IND_INDEX, 0); \ +} while (0) + +#define RS480_WRITE_MCIND(addr, val) \ +do { \ + RADEON_WRITE(RS480_NB_MC_INDEX, \ + ((addr) & 0xff) | RS480_NB_MC_IND_WR_EN); \ + RADEON_WRITE(RS480_NB_MC_DATA, (val)); \ + RADEON_WRITE(RS480_NB_MC_INDEX, 0xff); \ +} while (0) #define RS690_WRITE_MCIND(addr, val) \ do { \ @@ -1134,6 +1130,14 @@ do { \ RADEON_WRITE(RS690_MC_INDEX, RS690_MC_INDEX_WR_ACK); \ } while (0) +#define IGP_WRITE_MCIND(addr, val) \ +do { \ + if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) \ + RS690_WRITE_MCIND(addr, val); \ + else \ + RS480_WRITE_MCIND(addr, val); \ +} while (0) + #define CP_PACKET0( reg, n ) \ (RADEON_CP_PACKET0 | ((n) << 16) | ((reg) >> 2)) #define CP_PACKET0_TABLE( reg, n ) \ -- cgit v1.2.3 From d7463eb41d88a39de2653fd41857c4ccddb8707b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 May 2008 11:46:36 +1000 Subject: drm/radeon: write AGP_BASE_2 on chips that support it. Signed-off-by: Dave Airlie --- drivers/char/drm/radeon_cp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 3a424986e85e..fc0820c2b4b4 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -472,6 +472,8 @@ static void radeon_cp_init_ring_buffer(struct drm_device * dev, #if __OS_HAS_AGP if (dev_priv->flags & RADEON_IS_AGP) { RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev->agp->base); + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R200) + RADEON_WRITE(RADEON_AGP_BASE_2, 0); radeon_write_agp_location(dev_priv, (((dev_priv->gart_vm_start - 1 + dev_priv->gart_size) & 0xffff0000) | -- cgit v1.2.3 From 259434acccbc823ee8bc00b2d2689ccccd25e1fd Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 May 2008 11:51:12 +1000 Subject: drm/radeon: fix pixcache and purge/cache flushing registers Signed-off-by: Dave Airlie --- drivers/char/drm/r300_reg.h | 2 +- drivers/char/drm/radeon_cp.c | 38 +++++++++++++++++++++++++++++--------- drivers/char/drm/radeon_drv.h | 43 +++++++++++++++++++++++++++++++++++-------- 3 files changed, 65 insertions(+), 18 deletions(-) diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h index 8f664af9c4a4..a72c70322483 100644 --- a/drivers/char/drm/r300_reg.h +++ b/drivers/char/drm/r300_reg.h @@ -1346,7 +1346,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. /* Guess by Vladimir. * Set to 0A before 3D operations, set to 02 afterwards. */ -#define R300_RB3D_DSTCACHE_CTLSTAT 0x4E4C +/*#define R300_RB3D_DSTCACHE_CTLSTAT 0x4E4C*/ # define R300_RB3D_DSTCACHE_UNKNOWN_02 0x00000002 # define R300_RB3D_DSTCACHE_UNKNOWN_0A 0x0000000A diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index fc0820c2b4b4..8fce12e73403 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -161,16 +161,36 @@ static int radeon_do_pixcache_flush(drm_radeon_private_t * dev_priv) dev_priv->stats.boxes |= RADEON_BOX_WAIT_IDLE; - tmp = RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT); - tmp |= RADEON_RB3D_DC_FLUSH_ALL; - RADEON_WRITE(RADEON_RB3D_DSTCACHE_CTLSTAT, tmp); - - for (i = 0; i < dev_priv->usec_timeout; i++) { - if (!(RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT) - & RADEON_RB3D_DC_BUSY)) { - return 0; + if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { + tmp = RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT); + tmp |= RADEON_RB3D_DC_FLUSH_ALL; + RADEON_WRITE(RADEON_RB3D_DSTCACHE_CTLSTAT, tmp); + + for (i = 0; i < dev_priv->usec_timeout; i++) { + if (!(RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT) + & RADEON_RB3D_DC_BUSY)) { + return 0; + } + DRM_UDELAY(1); + } + } else { + /* 3D */ + tmp = RADEON_READ(R300_RB3D_DSTCACHE_CTLSTAT); + tmp |= RADEON_RB3D_DC_FLUSH_ALL; + RADEON_WRITE(R300_RB3D_DSTCACHE_CTLSTAT, tmp); + + /* 2D */ + tmp = RADEON_READ(RADEON_RB2D_DSTCACHE_CTLSTAT); + tmp |= RADEON_RB3D_DC_FLUSH_ALL; + RADEON_WRITE(RADEON_RB3D_DSTCACHE_CTLSTAT, tmp); + + for (i = 0; i < dev_priv->usec_timeout; i++) { + if (!(RADEON_READ(RADEON_RB2D_DSTCACHE_CTLSTAT) + & RADEON_RB3D_DC_BUSY)) { + return 0; + } + DRM_UDELAY(1); } - DRM_UDELAY(1); } #if RADEON_FIFO_DEBUG diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index 3063b0fa512f..5e6f4612adba 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -659,11 +659,18 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, # define RADEON_RB3D_ZC_FREE (1 << 2) # define RADEON_RB3D_ZC_FLUSH_ALL 0x5 # define RADEON_RB3D_ZC_BUSY (1 << 31) +#define R300_ZB_ZCACHE_CTLSTAT 0x4f18 +# define R300_ZC_FLUSH (1 << 0) +# define R300_ZC_FREE (1 << 1) +# define R300_ZC_FLUSH_ALL 0x3 +# define R300_ZC_BUSY (1 << 31) #define RADEON_RB3D_DSTCACHE_CTLSTAT 0x325c # define RADEON_RB3D_DC_FLUSH (3 << 0) # define RADEON_RB3D_DC_FREE (3 << 2) # define RADEON_RB3D_DC_FLUSH_ALL 0xf # define RADEON_RB3D_DC_BUSY (1 << 31) +#define R300_RB3D_DSTCACHE_CTLSTAT 0x4e4c +# define R300_RB3D_DC_FINISH (1 << 4) #define RADEON_RB3D_ZSTENCILCNTL 0x1c2c # define RADEON_Z_TEST_MASK (7 << 4) # define RADEON_Z_TEST_ALWAYS (7 << 4) @@ -1178,23 +1185,43 @@ do { \ } while (0) #define RADEON_FLUSH_CACHE() do { \ - OUT_RING( CP_PACKET0( RADEON_RB3D_DSTCACHE_CTLSTAT, 0 ) ); \ - OUT_RING( RADEON_RB3D_DC_FLUSH ); \ + if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \ + OUT_RING(CP_PACKET0(RADEON_RB3D_DSTCACHE_CTLSTAT, 0)); \ + OUT_RING(RADEON_RB3D_DC_FLUSH); \ + } else { \ + OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); \ + OUT_RING(RADEON_RB3D_DC_FLUSH); \ + } \ } while (0) #define RADEON_PURGE_CACHE() do { \ - OUT_RING( CP_PACKET0( RADEON_RB3D_DSTCACHE_CTLSTAT, 0 ) ); \ - OUT_RING( RADEON_RB3D_DC_FLUSH_ALL ); \ + if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \ + OUT_RING(CP_PACKET0(RADEON_RB3D_DSTCACHE_CTLSTAT, 0)); \ + OUT_RING(RADEON_RB3D_DC_FLUSH_ALL); \ + } else { \ + OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); \ + OUT_RING(RADEON_RB3D_DC_FLUSH_ALL); \ + } \ } while (0) #define RADEON_FLUSH_ZCACHE() do { \ - OUT_RING( CP_PACKET0( RADEON_RB3D_ZCACHE_CTLSTAT, 0 ) ); \ - OUT_RING( RADEON_RB3D_ZC_FLUSH ); \ + if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \ + OUT_RING(CP_PACKET0(RADEON_RB3D_ZCACHE_CTLSTAT, 0)); \ + OUT_RING(RADEON_RB3D_ZC_FLUSH); \ + } else { \ + OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0)); \ + OUT_RING(R300_ZC_FLUSH); \ + } \ } while (0) #define RADEON_PURGE_ZCACHE() do { \ - OUT_RING( CP_PACKET0( RADEON_RB3D_ZCACHE_CTLSTAT, 0 ) ); \ - OUT_RING( RADEON_RB3D_ZC_FLUSH_ALL ); \ + if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \ + OUT_RING(CP_PACKET0(RADEON_RB3D_ZCACHE_CTLSTAT, 0)); \ + OUT_RING(RADEON_RB3D_ZC_FLUSH_ALL); \ + } else { \ + OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); \ + OUT_RING(R300_ZC_FLUSH_ALL); \ + } \ } while (0) /* ================================================================ -- cgit v1.2.3 From d396db321bcaec54345e7e9e87cea8482d6ae3a8 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 May 2008 11:54:06 +1000 Subject: drm/radeon: fixup radeon_do_engine_reset Cleanup do engine reset for different chip families. Signed-off-by: Dave Airlie --- drivers/char/drm/radeon_cp.c | 49 +++++++++++++++++++++++--------------------- 1 file changed, 26 insertions(+), 23 deletions(-) diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 8fce12e73403..77bd90f6d414 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -418,12 +418,13 @@ static void radeon_do_cp_stop(drm_radeon_private_t * dev_priv) static int radeon_do_engine_reset(struct drm_device * dev) { drm_radeon_private_t *dev_priv = dev->dev_private; - u32 clock_cntl_index, mclk_cntl, rbbm_soft_reset; + u32 clock_cntl_index = 0, mclk_cntl = 0, rbbm_soft_reset; DRM_DEBUG("\n"); radeon_do_pixcache_flush(dev_priv); - if ((dev_priv->flags & RADEON_FAMILY_MASK) < CHIP_RV515) { + if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV410) { + /* may need something similar for newer chips */ clock_cntl_index = RADEON_READ(RADEON_CLOCK_CNTL_INDEX); mclk_cntl = RADEON_READ_PLL(dev, RADEON_MCLK_CNTL); @@ -434,28 +435,30 @@ static int radeon_do_engine_reset(struct drm_device * dev) RADEON_FORCEON_YCLKB | RADEON_FORCEON_MC | RADEON_FORCEON_AIC)); + } - rbbm_soft_reset = RADEON_READ(RADEON_RBBM_SOFT_RESET); - - RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset | - RADEON_SOFT_RESET_CP | - RADEON_SOFT_RESET_HI | - RADEON_SOFT_RESET_SE | - RADEON_SOFT_RESET_RE | - RADEON_SOFT_RESET_PP | - RADEON_SOFT_RESET_E2 | - RADEON_SOFT_RESET_RB)); - RADEON_READ(RADEON_RBBM_SOFT_RESET); - RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset & - ~(RADEON_SOFT_RESET_CP | - RADEON_SOFT_RESET_HI | - RADEON_SOFT_RESET_SE | - RADEON_SOFT_RESET_RE | - RADEON_SOFT_RESET_PP | - RADEON_SOFT_RESET_E2 | - RADEON_SOFT_RESET_RB))); - RADEON_READ(RADEON_RBBM_SOFT_RESET); - + rbbm_soft_reset = RADEON_READ(RADEON_RBBM_SOFT_RESET); + + RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset | + RADEON_SOFT_RESET_CP | + RADEON_SOFT_RESET_HI | + RADEON_SOFT_RESET_SE | + RADEON_SOFT_RESET_RE | + RADEON_SOFT_RESET_PP | + RADEON_SOFT_RESET_E2 | + RADEON_SOFT_RESET_RB)); + RADEON_READ(RADEON_RBBM_SOFT_RESET); + RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset & + ~(RADEON_SOFT_RESET_CP | + RADEON_SOFT_RESET_HI | + RADEON_SOFT_RESET_SE | + RADEON_SOFT_RESET_RE | + RADEON_SOFT_RESET_PP | + RADEON_SOFT_RESET_E2 | + RADEON_SOFT_RESET_RB))); + RADEON_READ(RADEON_RBBM_SOFT_RESET); + + if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV410) { RADEON_WRITE_PLL(RADEON_MCLK_CNTL, mclk_cntl); RADEON_WRITE(RADEON_CLOCK_CNTL_INDEX, clock_cntl_index); RADEON_WRITE(RADEON_RBBM_SOFT_RESET, rbbm_soft_reset); -- cgit v1.2.3 From 5b92c4045eaa42441b7ec249a406e4110ea400d4 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 May 2008 11:57:40 +1000 Subject: drm/radeon: init pipe setup in kernel code. This inits the card pipes in the kernel and lets userspace getparam the correct setup. Signed-off-by: Dave Airlie --- drivers/char/drm/radeon_cp.c | 48 +++++++++++++++++++++++++++++++++++++++++ drivers/char/drm/radeon_drm.h | 1 + drivers/char/drm/radeon_drv.h | 23 ++++++++++++++++++++ drivers/char/drm/radeon_state.c | 3 +++ 4 files changed, 75 insertions(+) diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 77bd90f6d414..599187558abb 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -247,6 +247,50 @@ static int radeon_do_wait_for_idle(drm_radeon_private_t * dev_priv) return -EBUSY; } +static void radeon_init_pipes(drm_radeon_private_t *dev_priv) +{ + uint32_t gb_tile_config, gb_pipe_sel = 0; + + /* RS4xx/RS6xx/R4xx/R5xx */ + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R420) { + gb_pipe_sel = RADEON_READ(R400_GB_PIPE_SELECT); + dev_priv->num_gb_pipes = ((gb_pipe_sel >> 12) & 0x3) + 1; + } else { + /* R3xx */ + if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R300) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R350)) { + dev_priv->num_gb_pipes = 2; + } else { + /* R3Vxx */ + dev_priv->num_gb_pipes = 1; + } + } + DRM_INFO("Num pipes: %d\n", dev_priv->num_gb_pipes); + + gb_tile_config = (R300_ENABLE_TILING | R300_TILE_SIZE_16 /*| R300_SUBPIXEL_1_16*/); + + switch (dev_priv->num_gb_pipes) { + case 2: gb_tile_config |= R300_PIPE_COUNT_R300; break; + case 3: gb_tile_config |= R300_PIPE_COUNT_R420_3P; break; + case 4: gb_tile_config |= R300_PIPE_COUNT_R420; break; + default: + case 1: gb_tile_config |= R300_PIPE_COUNT_RV350; break; + } + + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV515) { + RADEON_WRITE_PLL(R500_DYN_SCLK_PWMEM_PIPE, (1 | ((gb_pipe_sel >> 8) & 0xf) << 4)); + RADEON_WRITE(R500_SU_REG_DEST, ((1 << dev_priv->num_gb_pipes) - 1)); + } + RADEON_WRITE(R300_GB_TILE_CONFIG, gb_tile_config); + radeon_do_wait_for_idle(dev_priv); + RADEON_WRITE(R300_DST_PIPE_CONFIG, RADEON_READ(R300_DST_PIPE_CONFIG) | R300_PIPE_AUTO_CONFIG); + RADEON_WRITE(R300_RB2D_DSTCACHE_MODE, (RADEON_READ(R300_RB2D_DSTCACHE_MODE) | + R300_DC_AUTOFLUSH_ENABLE | + R300_DC_DC_DISABLE_IGNORE_PE)); + + +} + /* ================================================================ * CP control, initialization */ @@ -464,6 +508,10 @@ static int radeon_do_engine_reset(struct drm_device * dev) RADEON_WRITE(RADEON_RBBM_SOFT_RESET, rbbm_soft_reset); } + /* setup the raster pipes */ + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R300) + radeon_init_pipes(dev_priv); + /* Reset the CP ring */ radeon_do_cp_reset(dev_priv); diff --git a/drivers/char/drm/radeon_drm.h b/drivers/char/drm/radeon_drm.h index aab82e121e07..68b0608e01c9 100644 --- a/drivers/char/drm/radeon_drm.h +++ b/drivers/char/drm/radeon_drm.h @@ -669,6 +669,7 @@ typedef struct drm_radeon_indirect { #define RADEON_PARAM_CARD_TYPE 12 #define RADEON_PARAM_VBLANK_CRTC 13 /* VBLANK CRTC */ #define RADEON_PARAM_FB_LOCATION 14 /* FB location */ +#define RADEON_PARAM_NUM_GB_PIPES 15 /* num GB pipes */ typedef struct drm_radeon_getparam { int param; diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index 5e6f4612adba..c3615cf20b85 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -307,6 +307,8 @@ typedef struct drm_radeon_private { /* starting from here on, data is preserved accross an open */ uint32_t flags; /* see radeon_chip_flags */ unsigned long fb_aper_offset; + + int num_gb_pipes; } drm_radeon_private_t; typedef struct drm_radeon_buf_priv { @@ -529,6 +531,27 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RS480_AGP_BASE_2 0x0164 #define RADEON_AGP_BASE 0x0170 +/* pipe config regs */ +#define R400_GB_PIPE_SELECT 0x402c +#define R500_DYN_SCLK_PWMEM_PIPE 0x000d /* PLL */ +#define R500_SU_REG_DEST 0x42c8 +#define R300_GB_TILE_CONFIG 0x4018 +# define R300_ENABLE_TILING (1 << 0) +# define R300_PIPE_COUNT_RV350 (0 << 1) +# define R300_PIPE_COUNT_R300 (3 << 1) +# define R300_PIPE_COUNT_R420_3P (6 << 1) +# define R300_PIPE_COUNT_R420 (7 << 1) +# define R300_TILE_SIZE_8 (0 << 4) +# define R300_TILE_SIZE_16 (1 << 4) +# define R300_TILE_SIZE_32 (2 << 4) +# define R300_SUBPIXEL_1_12 (0 << 16) +# define R300_SUBPIXEL_1_16 (1 << 16) +#define R300_DST_PIPE_CONFIG 0x170c +# define R300_PIPE_AUTO_CONFIG (1 << 31) +#define R300_RB2D_DSTCACHE_MODE 0x3428 +# define R300_DC_AUTOFLUSH_ENABLE (1 << 8) +# define R300_DC_DC_DISABLE_IGNORE_PE (1 << 17) + #define RADEON_RB3D_COLOROFFSET 0x1c40 #define RADEON_RB3D_COLORPITCH 0x1c48 diff --git a/drivers/char/drm/radeon_state.c b/drivers/char/drm/radeon_state.c index 6f75512f591e..eee135712403 100644 --- a/drivers/char/drm/radeon_state.c +++ b/drivers/char/drm/radeon_state.c @@ -3037,6 +3037,9 @@ static int radeon_cp_getparam(struct drm_device *dev, void *data, struct drm_fil case RADEON_PARAM_FB_LOCATION: value = radeon_read_fb_location(dev_priv); break; + case RADEON_PARAM_NUM_GB_PIPES: + value = dev_priv->num_gb_pipes; + break; default: DRM_DEBUG("Invalid parameter %d\n", param->param); return -EINVAL; -- cgit v1.2.3 From c0beb2a723d69934a53f51a9d664c5b1dbbf634b Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 28 May 2008 13:52:28 +1000 Subject: drm/radeon: add initial r500 support. This contains all the command buffer processing for the r500 cards. It doesn't yet contain vblank support. Signed-off-by: Dave Airlie --- drivers/char/drm/r300_cmdbuf.c | 93 +++++++++++++++++++++++++++++++++++++----- drivers/char/drm/r300_reg.h | 16 ++++++++ drivers/char/drm/radeon_drm.h | 7 ++++ drivers/char/drm/radeon_drv.h | 31 +++++++++++++- 4 files changed, 135 insertions(+), 12 deletions(-) diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c index f535812e4057..329733a48b64 100644 --- a/drivers/char/drm/r300_cmdbuf.c +++ b/drivers/char/drm/r300_cmdbuf.c @@ -189,18 +189,12 @@ void r300_init_reg_flags(struct drm_device *dev) ADD_RANGE(R300_RE_CULL_CNTL, 1); ADD_RANGE(0x42C0, 2); ADD_RANGE(R300_RS_CNTL_0, 2); - ADD_RANGE(R300_RS_INTERP_0, 8); - ADD_RANGE(R300_RS_ROUTE_0, 8); + ADD_RANGE(0x43A4, 2); ADD_RANGE(0x43E8, 1); - ADD_RANGE(R300_PFS_CNTL_0, 3); - ADD_RANGE(R300_PFS_NODE_0, 4); - ADD_RANGE(R300_PFS_TEXI_0, 64); + ADD_RANGE(0x46A4, 5); - ADD_RANGE(R300_PFS_INSTR0_0, 64); - ADD_RANGE(R300_PFS_INSTR1_0, 64); - ADD_RANGE(R300_PFS_INSTR2_0, 64); - ADD_RANGE(R300_PFS_INSTR3_0, 64); + ADD_RANGE(R300_RE_FOG_STATE, 1); ADD_RANGE(R300_FOG_COLOR_R, 3); ADD_RANGE(R300_PP_ALPHA_TEST, 2); @@ -241,7 +235,25 @@ void r300_init_reg_flags(struct drm_device *dev) ADD_RANGE(R300_VAP_INPUT_ROUTE_1_0, 8); if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV515) { - ADD_RANGE(0x4074, 16); + ADD_RANGE(R500_VAP_INDEX_OFFSET, 1); + ADD_RANGE(R500_US_CONFIG, 2); + ADD_RANGE(R500_US_CODE_ADDR, 3); + ADD_RANGE(R500_US_FC_CTRL, 1); + ADD_RANGE(R500_RS_IP_0, 16); + ADD_RANGE(R500_RS_INST_0, 16); + ADD_RANGE(R500_RB3D_COLOR_CLEAR_VALUE_AR, 2); + ADD_RANGE(R500_RB3D_CONSTANT_COLOR_AR, 2); + } else { + ADD_RANGE(R300_PFS_CNTL_0, 3); + ADD_RANGE(R300_PFS_NODE_0, 4); + ADD_RANGE(R300_PFS_TEXI_0, 64); + ADD_RANGE(R300_PFS_INSTR0_0, 64); + ADD_RANGE(R300_PFS_INSTR1_0, 64); + ADD_RANGE(R300_PFS_INSTR2_0, 64); + ADD_RANGE(R300_PFS_INSTR3_0, 64); + ADD_RANGE(R300_RS_INTERP_0, 8); + ADD_RANGE(R300_RS_ROUTE_0, 8); + } } @@ -828,6 +840,54 @@ static int r300_scratch(drm_radeon_private_t *dev_priv, return 0; } +/** + * Uploads user-supplied vertex program instructions or parameters onto + * the graphics card. + * Called by r300_do_cp_cmdbuf. + */ +static inline int r300_emit_r500fp(drm_radeon_private_t *dev_priv, + drm_radeon_kcmd_buffer_t *cmdbuf, + drm_r300_cmd_header_t header) +{ + int sz; + int addr; + int type; + int clamp; + int stride; + RING_LOCALS; + + sz = header.r500fp.count; + /* address is 9 bits 0 - 8, bit 1 of flags is part of address */ + addr = ((header.r500fp.adrhi_flags & 1) << 8) | header.r500fp.adrlo; + + type = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_TYPE); + clamp = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_CLAMP); + + addr |= (type << 16); + addr |= (clamp << 17); + + stride = type ? 4 : 6; + + DRM_DEBUG("r500fp %d %d type: %d\n", sz, addr, type); + if (!sz) + return 0; + if (sz * stride * 4 > cmdbuf->bufsz) + return -EINVAL; + + BEGIN_RING(3 + sz * stride); + OUT_RING_REG(R500_GA_US_VECTOR_INDEX, addr); + OUT_RING(CP_PACKET0_TABLE(R500_GA_US_VECTOR_DATA, sz * stride - 1)); + OUT_RING_TABLE((int *)cmdbuf->buf, sz * stride); + + ADVANCE_RING(); + + cmdbuf->buf += sz * stride * 4; + cmdbuf->bufsz -= sz * stride * 4; + + return 0; +} + + /** * Parses and validates a user-supplied command buffer and emits appropriate * commands on the DMA ring buffer. @@ -963,6 +1023,19 @@ int r300_do_cp_cmdbuf(struct drm_device *dev, } break; + case R300_CMD_R500FP: + if ((dev_priv->flags & RADEON_FAMILY_MASK) < CHIP_RV515) { + DRM_ERROR("Calling r500 command on r300 card\n"); + ret = -EINVAL; + goto cleanup; + } + DRM_DEBUG("R300_CMD_R500FP\n"); + ret = r300_emit_r500fp(dev_priv, cmdbuf, header); + if (ret) { + DRM_ERROR("r300_emit_r500fp failed\n"); + goto cleanup; + } + break; default: DRM_ERROR("bad cmd_type %i at %p\n", header.header.cmd_type, diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h index a72c70322483..a883d10c40b1 100644 --- a/drivers/char/drm/r300_reg.h +++ b/drivers/char/drm/r300_reg.h @@ -1623,4 +1623,20 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. */ #define R300_CP_CMD_BITBLT_MULTI 0xC0009B00 +#define R500_VAP_INDEX_OFFSET 0x208c + +#define R500_GA_US_VECTOR_INDEX 0x4250 +#define R500_GA_US_VECTOR_DATA 0x4254 + +#define R500_RS_IP_0 0x4074 +#define R500_RS_INST_0 0x4320 + +#define R500_US_CONFIG 0x4600 + +#define R500_US_FC_CTRL 0x4624 +#define R500_US_CODE_ADDR 0x4630 + +#define R500_RB3D_COLOR_CLEAR_VALUE_AR 0x46c0 +#define R500_RB3D_CONSTANT_COLOR_AR 0x4ef8 + #endif /* _R300_REG_H */ diff --git a/drivers/char/drm/radeon_drm.h b/drivers/char/drm/radeon_drm.h index 68b0608e01c9..73ff51f12311 100644 --- a/drivers/char/drm/radeon_drm.h +++ b/drivers/char/drm/radeon_drm.h @@ -240,6 +240,7 @@ typedef union { # define R300_NEW_WAIT_2D_2D_CLEAN_3D_3D_CLEAN 0x8 #define R300_CMD_SCRATCH 8 +#define R300_CMD_R500FP 9 typedef union { unsigned int u; @@ -268,6 +269,9 @@ typedef union { struct { unsigned char cmd_type, reg, n_bufs, flags; } scratch; + struct { + unsigned char cmd_type, count, adrlo, adrhi_flags; + } r500fp; } drm_r300_cmd_header_t; #define RADEON_FRONT 0x1 @@ -278,6 +282,9 @@ typedef union { #define RADEON_USE_HIERZ 0x40000000 #define RADEON_USE_COMP_ZBUF 0x20000000 +#define R500FP_CONSTANT_TYPE (1 << 1) +#define R500FP_CONSTANT_CLAMP (1 << 2) + /* Primitive types */ #define RADEON_POINTS 0x1 diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index c3615cf20b85..d0dc47cee6c9 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -38,7 +38,7 @@ #define DRIVER_NAME "radeon" #define DRIVER_DESC "ATI Radeon" -#define DRIVER_DATE "20060524" +#define DRIVER_DATE "20080528" /* Interface history: * @@ -98,9 +98,10 @@ * 1.26- Add support for variable size PCI(E) gart aperture * 1.27- Add support for IGP GART * 1.28- Add support for VBL on CRTC2 + * 1.29- R500 3D cmd buffer support */ #define DRIVER_MAJOR 1 -#define DRIVER_MINOR 28 +#define DRIVER_MINOR 29 #define DRIVER_PATCHLEVEL 0 /* @@ -294,6 +295,7 @@ typedef struct drm_radeon_private { int vblank_crtc; uint32_t irq_enable_reg; int irq_enabled; + uint32_t r500_disp_irq_reg; struct radeon_surface surfaces[RADEON_MAX_SURFACES]; struct radeon_virt_surface virt_surfaces[2 * RADEON_MAX_SURFACES]; @@ -1103,6 +1105,31 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define R200_VAP_PVS_CNTL_1 0x22D0 +#define R500_D1CRTC_STATUS 0x609c +#define R500_D2CRTC_STATUS 0x689c +#define R500_CRTC_V_BLANK (1<<0) + +#define R500_D1CRTC_FRAME_COUNT 0x60a4 +#define R500_D2CRTC_FRAME_COUNT 0x68a4 + +#define R500_D1MODE_V_COUNTER 0x6530 +#define R500_D2MODE_V_COUNTER 0x6d30 + +#define R500_D1MODE_VBLANK_STATUS 0x6534 +#define R500_D2MODE_VBLANK_STATUS 0x6d34 +#define R500_VBLANK_OCCURED (1<<0) +#define R500_VBLANK_ACK (1<<4) +#define R500_VBLANK_STAT (1<<12) +#define R500_VBLANK_INT (1<<16) + +#define R500_DxMODE_INT_MASK 0x6540 +#define R500_D1MODE_INT_MASK (1<<0) +#define R500_D2MODE_INT_MASK (1<<8) + +#define R500_DISP_INTERRUPT_STATUS 0x7edc +#define R500_D1_VBLANK_INTERRUPT (1 << 4) +#define R500_D2_VBLANK_INTERRUPT (1 << 5) + /* Constants */ #define RADEON_MAX_USEC_TIMEOUT 100000 /* 100 ms */ -- cgit v1.2.3 From 9156cf09f56150ed89f77eaa4c386a07789776a0 Mon Sep 17 00:00:00 2001 From: Roland Scheidegger Date: Thu, 19 Jun 2008 11:36:04 +1000 Subject: drm/radeon: fix texture uploads with large 3d textures (bug 13980) Texture uploads could hit the blitter coordinate limit, adjust the texture offset when uploading the pieces. Make sure to check the end address of the upload too. Signed-off-by: Dave Airlie --- drivers/char/drm/radeon_state.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/char/drm/radeon_state.c b/drivers/char/drm/radeon_state.c index eee135712403..11c146b49211 100644 --- a/drivers/char/drm/radeon_state.c +++ b/drivers/char/drm/radeon_state.c @@ -1662,7 +1662,7 @@ static int radeon_cp_dispatch_texture(struct drm_device * dev, u32 height; int i; u32 texpitch, microtile; - u32 offset; + u32 offset, byte_offset; RING_LOCALS; if (radeon_check_and_fixup_offset(dev_priv, file_priv, &tex->offset)) { @@ -1727,6 +1727,13 @@ static int radeon_cp_dispatch_texture(struct drm_device * dev, } else microtile = 0; + /* this might fail for zero-sized uploads - are those illegal? */ + if (!radeon_check_offset(dev_priv, tex->offset + image->height * + blit_width - 1)) { + DRM_ERROR("Invalid final destination offset\n"); + return -EINVAL; + } + DRM_DEBUG("tex=%dx%d blit=%d\n", tex_width, tex->height, blit_width); do { @@ -1840,6 +1847,7 @@ static int radeon_cp_dispatch_texture(struct drm_device * dev, } #undef RADEON_COPY_MT + byte_offset = (image->y & ~2047) * blit_width; buf->file_priv = file_priv; buf->used = size; offset = dev_priv->gart_buffers_offset + buf->offset; @@ -1854,9 +1862,9 @@ static int radeon_cp_dispatch_texture(struct drm_device * dev, RADEON_DP_SRC_SOURCE_MEMORY | RADEON_GMC_CLR_CMP_CNTL_DIS | RADEON_GMC_WR_MSK_DIS); OUT_RING((spitch << 22) | (offset >> 10)); - OUT_RING((texpitch << 22) | (tex->offset >> 10)); + OUT_RING((texpitch << 22) | ((tex->offset >> 10) + (byte_offset >> 10))); OUT_RING(0); - OUT_RING((image->x << 16) | image->y); + OUT_RING((image->x << 16) | (image->y % 2048)); OUT_RING((image->width << 16) | height); RADEON_WAIT_UNTIL_2D_IDLE(); ADVANCE_RING(); -- cgit v1.2.3 From 70b13d510fc9d137e362b7db3ac5b14b50d78477 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Jun 2008 11:40:44 +1000 Subject: drm/r500: add support for AGP based cards. AGP registers weren't programmed properly for r500 cards. Signed-off-by: Dave Airlie --- drivers/char/drm/radeon_cp.c | 26 +++++++++++++++++++++++--- drivers/char/drm/radeon_drv.h | 4 ++++ 2 files changed, 27 insertions(+), 3 deletions(-) diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 599187558abb..f5e22bfcc3cb 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -113,6 +113,27 @@ static void radeon_write_agp_location(drm_radeon_private_t *dev_priv, u32 agp_lo RADEON_WRITE(RADEON_MC_AGP_LOCATION, agp_loc); } +static void radeon_write_agp_base(drm_radeon_private_t *dev_priv, u64 agp_base) +{ + u32 agp_base_hi = upper_32_bits(agp_base); + u32 agp_base_lo = agp_base & 0xffffffff; + + if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) { + R500_WRITE_MCIND(RV515_MC_AGP_BASE, agp_base_lo); + R500_WRITE_MCIND(RV515_MC_AGP_BASE_2, agp_base_hi); + } else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) { + RS690_WRITE_MCIND(RS690_MC_AGP_BASE, agp_base_lo); + RS690_WRITE_MCIND(RS690_MC_AGP_BASE_2, agp_base_hi); + } else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) { + R500_WRITE_MCIND(R520_MC_AGP_BASE, agp_base_lo); + R500_WRITE_MCIND(R520_MC_AGP_BASE_2, agp_base_hi); + } else { + RADEON_WRITE(RADEON_AGP_BASE, agp_base_lo); + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R200) + RADEON_WRITE(RADEON_AGP_BASE_2, agp_base_hi); + } +} + static int RADEON_READ_PLL(struct drm_device * dev, int addr) { drm_radeon_private_t *dev_priv = dev->dev_private; @@ -542,9 +563,8 @@ static void radeon_cp_init_ring_buffer(struct drm_device * dev, #if __OS_HAS_AGP if (dev_priv->flags & RADEON_IS_AGP) { - RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev->agp->base); - if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R200) - RADEON_WRITE(RADEON_AGP_BASE_2, 0); + radeon_write_agp_base(dev_priv, dev->agp->base); + radeon_write_agp_location(dev_priv, (((dev_priv->gart_vm_start - 1 + dev_priv->gart_size) & 0xffff0000) | diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index d0dc47cee6c9..f43e1f9b9550 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -522,9 +522,13 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RV515_MC_FB_LOCATION 0x01 #define RV515_MC_AGP_LOCATION 0x02 +#define RV515_MC_AGP_BASE 0x03 +#define RV515_MC_AGP_BASE_2 0x04 #define R520_MC_FB_LOCATION 0x04 #define R520_MC_AGP_LOCATION 0x05 +#define R520_MC_AGP_BASE 0x06 +#define R520_MC_AGP_BASE_2 0x07 #define RADEON_MPP_TB_CONFIG 0x01c0 #define RADEON_MEM_CNTL 0x0140 -- cgit v1.2.3 From 7ecabc53a29bb31689fa1852a926e021179a64a6 Mon Sep 17 00:00:00 2001 From: Dennis Kasprzyk Date: Thu, 19 Jun 2008 12:36:55 +1000 Subject: drm/radeon: Restore sw interrupt on resume Fixes performance drop after suspend/resume on some systems. Signed-off-by: Dave Airlie --- drivers/char/drm/radeon_cp.c | 1 + drivers/char/drm/radeon_drv.h | 1 + drivers/char/drm/radeon_irq.c | 2 +- 3 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index f5e22bfcc3cb..d4feccbe46d5 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -1292,6 +1292,7 @@ static int radeon_do_resume_cp(struct drm_device * dev) radeon_cp_init_ring_buffer(dev, dev_priv); radeon_do_engine_reset(dev); + radeon_enable_interrupt(dev); DRM_DEBUG("radeon_do_resume_cp() complete\n"); diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index f43e1f9b9550..e20b5d878716 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -386,6 +386,7 @@ extern irqreturn_t radeon_driver_irq_handler(DRM_IRQ_ARGS); extern void radeon_driver_irq_preinstall(struct drm_device * dev); extern void radeon_driver_irq_postinstall(struct drm_device * dev); extern void radeon_driver_irq_uninstall(struct drm_device * dev); +extern void radeon_enable_interrupt(struct drm_device *dev); extern int radeon_vblank_crtc_get(struct drm_device *dev); extern int radeon_vblank_crtc_set(struct drm_device *dev, int64_t value); diff --git a/drivers/char/drm/radeon_irq.c b/drivers/char/drm/radeon_irq.c index 009af3814b6f..ee40d197deb7 100644 --- a/drivers/char/drm/radeon_irq.c +++ b/drivers/char/drm/radeon_irq.c @@ -234,7 +234,7 @@ int radeon_irq_wait(struct drm_device *dev, void *data, struct drm_file *file_pr return radeon_wait_irq(dev, irqwait->irq_seq); } -static void radeon_enable_interrupt(struct drm_device *dev) +void radeon_enable_interrupt(struct drm_device *dev) { drm_radeon_private_t *dev_priv = (drm_radeon_private_t *) dev->dev_private; -- cgit v1.2.3 From 5cfb6956073a9e42d44a26790b7800980634d037 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 19 Jun 2008 12:38:29 +1000 Subject: drm/radeon: switch IGP gart to use radeon_write_agp_base() Signed-off-by: Dave Airlie --- drivers/char/drm/radeon_cp.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index d4feccbe46d5..441645ea8b87 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -127,6 +127,9 @@ static void radeon_write_agp_base(drm_radeon_private_t *dev_priv, u64 agp_base) } else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) { R500_WRITE_MCIND(R520_MC_AGP_BASE, agp_base_lo); R500_WRITE_MCIND(R520_MC_AGP_BASE_2, agp_base_hi); + } else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS480) { + RADEON_WRITE(RADEON_AGP_BASE, agp_base_lo); + RADEON_WRITE(RS480_AGP_BASE_2, 0); } else { RADEON_WRITE(RADEON_AGP_BASE, agp_base_lo); if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R200) @@ -741,14 +744,7 @@ static void radeon_set_igpgart(drm_radeon_private_t * dev_priv, int on) IGP_WRITE_MCIND(RS480_AGP_MODE_CNTL, ((1 << RS480_REQ_TYPE_SNOOP_SHIFT) | RS480_REQ_TYPE_SNOOP_DIS)); - if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) { - IGP_WRITE_MCIND(RS690_MC_AGP_BASE, - (unsigned int)dev_priv->gart_vm_start); - IGP_WRITE_MCIND(RS690_MC_AGP_BASE_2, 0); - } else { - RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev_priv->gart_vm_start); - RADEON_WRITE(RS480_AGP_BASE_2, 0); - } + radeon_write_agp_base(dev_priv, dev_priv->gart_vm_start); dev_priv->gart_size = 32*1024*1024; temp = (((dev_priv->gart_vm_start - 1 + dev_priv->gart_size) & -- cgit v1.2.3 From 5e35eff13f7dd0f5c1d82b3b4708b2f7a5f44113 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 19 Jun 2008 12:39:23 +1000 Subject: drm/radeon: use DSTCACHE_CTLSTAT rather than RB2D_DSTCACHE_CTLSTAT According to the hw guys, you should use DSTCACHE_CTLSTAT to flush the 2D dst cache rather than RB2D_DSTCACHE_CTLSTAT. Signed-off-by: Dave Airlie --- drivers/char/drm/radeon_cp.c | 6 +++--- drivers/char/drm/radeon_drv.h | 11 ++++++----- 2 files changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 441645ea8b87..e53158f0ecb5 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -204,12 +204,12 @@ static int radeon_do_pixcache_flush(drm_radeon_private_t * dev_priv) RADEON_WRITE(R300_RB3D_DSTCACHE_CTLSTAT, tmp); /* 2D */ - tmp = RADEON_READ(RADEON_RB2D_DSTCACHE_CTLSTAT); + tmp = RADEON_READ(R300_DSTCACHE_CTLSTAT); tmp |= RADEON_RB3D_DC_FLUSH_ALL; - RADEON_WRITE(RADEON_RB3D_DSTCACHE_CTLSTAT, tmp); + RADEON_WRITE(R300_DSTCACHE_CTLSTAT, tmp); for (i = 0; i < dev_priv->usec_timeout; i++) { - if (!(RADEON_READ(RADEON_RB2D_DSTCACHE_CTLSTAT) + if (!(RADEON_READ(R300_DSTCACHE_CTLSTAT) & RADEON_RB3D_DC_BUSY)) { return 0; } diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index e20b5d878716..3f0eca957aa7 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -662,11 +662,12 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_PP_TXFILTER_1 0x1c6c #define RADEON_PP_TXFILTER_2 0x1c84 -#define RADEON_RB2D_DSTCACHE_CTLSTAT 0x342c -# define RADEON_RB2D_DC_FLUSH (3 << 0) -# define RADEON_RB2D_DC_FREE (3 << 2) -# define RADEON_RB2D_DC_FLUSH_ALL 0xf -# define RADEON_RB2D_DC_BUSY (1 << 31) +#define R300_RB2D_DSTCACHE_CTLSTAT 0x342c /* use R300_DSTCACHE_CTLSTAT */ +#define R300_DSTCACHE_CTLSTAT 0x1714 +# define R300_RB2D_DC_FLUSH (3 << 0) +# define R300_RB2D_DC_FREE (3 << 2) +# define R300_RB2D_DC_FLUSH_ALL 0xf +# define R300_RB2D_DC_BUSY (1 << 31) #define RADEON_RB3D_CNTL 0x1c3c # define RADEON_ALPHA_BLEND_ENABLE (1 << 0) # define RADEON_PLANE_MASK_ENABLE (1 << 1) -- cgit v1.2.3 From 21efa2bac91b8d12064617c5a35492ec982544eb Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Jun 2008 13:01:58 +1000 Subject: drm/radeon: add hier-z registers for r300 and r500 chipsets --- drivers/char/drm/r300_cmdbuf.c | 24 ++--- drivers/char/drm/r300_reg.h | 224 ++++++++++++++++++++++++++++++++--------- 2 files changed, 189 insertions(+), 59 deletions(-) diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c index 329733a48b64..702df45320f7 100644 --- a/drivers/char/drm/r300_cmdbuf.c +++ b/drivers/char/drm/r300_cmdbuf.c @@ -190,7 +190,7 @@ void r300_init_reg_flags(struct drm_device *dev) ADD_RANGE(0x42C0, 2); ADD_RANGE(R300_RS_CNTL_0, 2); - ADD_RANGE(0x43A4, 2); + ADD_RANGE(R300_SC_HYPERZ, 2); ADD_RANGE(0x43E8, 1); ADD_RANGE(0x46A4, 5); @@ -209,14 +209,12 @@ void r300_init_reg_flags(struct drm_device *dev) ADD_RANGE(0x4E50, 9); ADD_RANGE(0x4E88, 1); ADD_RANGE(0x4EA0, 2); - ADD_RANGE(R300_RB3D_ZSTENCIL_CNTL_0, 3); - ADD_RANGE(R300_RB3D_ZSTENCIL_FORMAT, 4); - ADD_RANGE_MARK(R300_RB3D_DEPTHOFFSET, 1, MARK_CHECK_OFFSET); /* check offset */ - ADD_RANGE(R300_RB3D_DEPTHPITCH, 1); - ADD_RANGE(0x4F28, 1); - ADD_RANGE(0x4F30, 2); - ADD_RANGE(0x4F44, 1); - ADD_RANGE(0x4F54, 1); + ADD_RANGE(R300_ZB_CNTL, 3); + ADD_RANGE(R300_ZB_FORMAT, 4); + ADD_RANGE_MARK(R300_ZB_DEPTHOFFSET, 1, MARK_CHECK_OFFSET); /* check offset */ + ADD_RANGE(R300_ZB_DEPTHPITCH, 1); + ADD_RANGE(R300_ZB_DEPTHCLEARVALUE, 1); + ADD_RANGE(R300_ZB_ZMASK_OFFSET, 13); ADD_RANGE(R300_TX_FILTER_0, 16); ADD_RANGE(R300_TX_FILTER1_0, 16); @@ -229,7 +227,7 @@ void r300_init_reg_flags(struct drm_device *dev) ADD_RANGE(R300_TX_BORDER_COLOR_0, 16); /* Sporadic registers used as primitives are emitted */ - ADD_RANGE(R300_RB3D_ZCACHE_CTLSTAT, 1); + ADD_RANGE(R300_ZB_ZCACHE_CTLSTAT, 1); ADD_RANGE(R300_RB3D_DSTCACHE_CTLSTAT, 1); ADD_RANGE(R300_VAP_INPUT_ROUTE_0_0, 8); ADD_RANGE(R300_VAP_INPUT_ROUTE_1_0, 8); @@ -243,6 +241,7 @@ void r300_init_reg_flags(struct drm_device *dev) ADD_RANGE(R500_RS_INST_0, 16); ADD_RANGE(R500_RB3D_COLOR_CLEAR_VALUE_AR, 2); ADD_RANGE(R500_RB3D_CONSTANT_COLOR_AR, 2); + ADD_RANGE(R500_ZB_FIFO_SIZE, 2); } else { ADD_RANGE(R300_PFS_CNTL_0, 3); ADD_RANGE(R300_PFS_NODE_0, 4); @@ -719,8 +718,9 @@ static __inline__ void r300_pacify(drm_radeon_private_t *dev_priv) BEGIN_RING(6); OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); OUT_RING(R300_RB3D_DSTCACHE_UNKNOWN_0A); - OUT_RING(CP_PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0)); - OUT_RING(R300_RB3D_ZCACHE_UNKNOWN_03); + OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0)); + OUT_RING(R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE| + R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE); OUT_RING(CP_PACKET3(RADEON_CP_NOP, 0)); OUT_RING(0x0); ADVANCE_RING(); diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h index a883d10c40b1..a6802f26afc4 100644 --- a/drivers/char/drm/r300_reg.h +++ b/drivers/char/drm/r300_reg.h @@ -702,6 +702,27 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_RS_ROUTE_1_UNKNOWN11 (1 << 11) /* END: Rasterization / Interpolators - many guesses */ +/* Hierarchical Z Enable */ +#define R300_SC_HYPERZ 0x43a4 +# define R300_SC_HYPERZ_DISABLE (0 << 0) +# define R300_SC_HYPERZ_ENABLE (1 << 0) +# define R300_SC_HYPERZ_MIN (0 << 1) +# define R300_SC_HYPERZ_MAX (1 << 1) +# define R300_SC_HYPERZ_ADJ_256 (0 << 2) +# define R300_SC_HYPERZ_ADJ_128 (1 << 2) +# define R300_SC_HYPERZ_ADJ_64 (2 << 2) +# define R300_SC_HYPERZ_ADJ_32 (3 << 2) +# define R300_SC_HYPERZ_ADJ_16 (4 << 2) +# define R300_SC_HYPERZ_ADJ_8 (5 << 2) +# define R300_SC_HYPERZ_ADJ_4 (6 << 2) +# define R300_SC_HYPERZ_ADJ_2 (7 << 2) +# define R300_SC_HYPERZ_HZ_Z0MIN_NO (0 << 5) +# define R300_SC_HYPERZ_HZ_Z0MIN (1 << 5) +# define R300_SC_HYPERZ_HZ_Z0MAX_NO (0 << 6) +# define R300_SC_HYPERZ_HZ_Z0MAX (1 << 6) + +#define R300_SC_EDGERULE 0x43a8 + /* BEGIN: Scissors and cliprects */ /* There are four clipping rectangles. Their corner coordinates are inclusive. @@ -1355,19 +1376,14 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. * for this. * Bit (1<<8) is the "test" bit. so plain write is 6 - vd */ -#define R300_RB3D_ZSTENCIL_CNTL_0 0x4F00 -# define R300_RB3D_Z_DISABLED_1 0x00000010 -# define R300_RB3D_Z_DISABLED_2 0x00000014 -# define R300_RB3D_Z_TEST 0x00000012 -# define R300_RB3D_Z_TEST_AND_WRITE 0x00000016 -# define R300_RB3D_Z_WRITE_ONLY 0x00000006 - -# define R300_RB3D_Z_TEST 0x00000012 -# define R300_RB3D_Z_TEST_AND_WRITE 0x00000016 -# define R300_RB3D_Z_WRITE_ONLY 0x00000006 -# define R300_RB3D_STENCIL_ENABLE 0x00000001 - -#define R300_RB3D_ZSTENCIL_CNTL_1 0x4F04 +#define R300_ZB_CNTL 0x4F00 +# define R300_STENCIL_ENABLE (1 << 0) +# define R300_Z_ENABLE (1 << 1) +# define R300_Z_WRITE_ENABLE (1 << 2) +# define R300_Z_SIGNED_COMPARE (1 << 3) +# define R300_STENCIL_FRONT_BACK (1 << 4) + +#define R300_ZB_ZSTENCILCNTL 0x4f04 /* functions */ # define R300_ZS_NEVER 0 # define R300_ZS_LESS 1 @@ -1387,52 +1403,166 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_ZS_INVERT 5 # define R300_ZS_INCR_WRAP 6 # define R300_ZS_DECR_WRAP 7 +# define R300_Z_FUNC_SHIFT 0 /* front and back refer to operations done for front and back faces, i.e. separate stencil function support */ -# define R300_RB3D_ZS1_DEPTH_FUNC_SHIFT 0 -# define R300_RB3D_ZS1_FRONT_FUNC_SHIFT 3 -# define R300_RB3D_ZS1_FRONT_FAIL_OP_SHIFT 6 -# define R300_RB3D_ZS1_FRONT_ZPASS_OP_SHIFT 9 -# define R300_RB3D_ZS1_FRONT_ZFAIL_OP_SHIFT 12 -# define R300_RB3D_ZS1_BACK_FUNC_SHIFT 15 -# define R300_RB3D_ZS1_BACK_FAIL_OP_SHIFT 18 -# define R300_RB3D_ZS1_BACK_ZPASS_OP_SHIFT 21 -# define R300_RB3D_ZS1_BACK_ZFAIL_OP_SHIFT 24 - -#define R300_RB3D_ZSTENCIL_CNTL_2 0x4F08 -# define R300_RB3D_ZS2_STENCIL_REF_SHIFT 0 -# define R300_RB3D_ZS2_STENCIL_MASK 0xFF -# define R300_RB3D_ZS2_STENCIL_MASK_SHIFT 8 -# define R300_RB3D_ZS2_STENCIL_WRITE_MASK_SHIFT 16 +# define R300_S_FRONT_FUNC_SHIFT 3 +# define R300_S_FRONT_SFAIL_OP_SHIFT 6 +# define R300_S_FRONT_ZPASS_OP_SHIFT 9 +# define R300_S_FRONT_ZFAIL_OP_SHIFT 12 +# define R300_S_BACK_FUNC_SHIFT 15 +# define R300_S_BACK_SFAIL_OP_SHIFT 18 +# define R300_S_BACK_ZPASS_OP_SHIFT 21 +# define R300_S_BACK_ZFAIL_OP_SHIFT 24 + +#define R300_ZB_STENCILREFMASK 0x4f08 +# define R300_STENCILREF_SHIFT 0 +# define R300_STENCILREF_MASK 0x000000ff +# define R300_STENCILMASK_SHIFT 8 +# define R300_STENCILMASK_MASK 0x0000ff00 +# define R300_STENCILWRITEMASK_SHIFT 16 +# define R300_STENCILWRITEMASK_MASK 0x00ff0000 /* gap */ -#define R300_RB3D_ZSTENCIL_FORMAT 0x4F10 -# define R300_DEPTH_FORMAT_16BIT_INT_Z (0 << 0) -# define R300_DEPTH_FORMAT_24BIT_INT_Z (2 << 0) - /* 16 bit format or some aditional bit ? */ -# define R300_DEPTH_FORMAT_UNK32 (32 << 0) +#define R300_ZB_FORMAT 0x4f10 +# define R300_DEPTHFORMAT_16BIT_INT_Z (0 << 0) +# define R300_DEPTHFORMAT_16BIT_13E3 (1 << 0) +# define R300_DEPTHFORMAT_24BIT_INT_Z_8BIT_STENCIL (2 << 0) +/* reserved up to (15 << 0) */ +# define R300_INVERT_13E3_LEADING_ONES (0 << 4) +# define R300_INVERT_13E3_LEADING_ZEROS (1 << 4) -#define R300_RB3D_EARLY_Z 0x4F14 -# define R300_EARLY_Z_DISABLE (0 << 0) -# define R300_EARLY_Z_ENABLE (1 << 0) +#define R300_ZB_ZTOP 0x4F14 +# define R300_ZTOP_DISABLE (0 << 0) +# define R300_ZTOP_ENABLE (1 << 0) /* gap */ -#define R300_RB3D_ZCACHE_CTLSTAT 0x4F18 /* GUESS */ -# define R300_RB3D_ZCACHE_UNKNOWN_01 0x1 -# define R300_RB3D_ZCACHE_UNKNOWN_03 0x3 +#define R300_ZB_ZCACHE_CTLSTAT 0x4f18 +# define R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_NO_EFFECT (0 << 0) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE (1 << 0) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_NO_EFFECT (0 << 1) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE (1 << 1) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_BUSY_IDLE (0 << 31) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_BUSY_BUSY (1 << 31) + +#define R300_ZB_BW_CNTL 0x4f1c +# define R300_HIZ_DISABLE (0 << 0) +# define R300_HIZ_ENABLE (1 << 0) +# define R300_HIZ_MIN (0 << 1) +# define R300_HIZ_MAX (1 << 1) +# define R300_FAST_FILL_DISABLE (0 << 2) +# define R300_FAST_FILL_ENABLE (1 << 2) +# define R300_RD_COMP_DISABLE (0 << 3) +# define R300_RD_COMP_ENABLE (1 << 3) +# define R300_WR_COMP_DISABLE (0 << 4) +# define R300_WR_COMP_ENABLE (1 << 4) +# define R300_ZB_CB_CLEAR_RMW (0 << 5) +# define R300_ZB_CB_CLEAR_CACHE_LINEAR (1 << 5) +# define R300_FORCE_COMPRESSED_STENCIL_VALUE_DISABLE (0 << 6) +# define R300_FORCE_COMPRESSED_STENCIL_VALUE_ENABLE (1 << 6) + +# define R500_ZEQUAL_OPTIMIZE_ENABLE (0 << 7) +# define R500_ZEQUAL_OPTIMIZE_DISABLE (1 << 7) +# define R500_SEQUAL_OPTIMIZE_ENABLE (0 << 8) +# define R500_SEQUAL_OPTIMIZE_DISABLE (1 << 8) + +# define R500_BMASK_ENABLE (0 << 10) +# define R500_BMASK_DISABLE (1 << 10) +# define R500_HIZ_EQUAL_REJECT_DISABLE (0 << 11) +# define R500_HIZ_EQUAL_REJECT_ENABLE (1 << 11) +# define R500_HIZ_FP_EXP_BITS_DISABLE (0 << 12) +# define R500_HIZ_FP_EXP_BITS_1 (1 << 12) +# define R500_HIZ_FP_EXP_BITS_2 (2 << 12) +# define R500_HIZ_FP_EXP_BITS_3 (3 << 12) +# define R500_HIZ_FP_EXP_BITS_4 (4 << 12) +# define R500_HIZ_FP_EXP_BITS_5 (5 << 12) +# define R500_HIZ_FP_INVERT_LEADING_ONES (0 << 15) +# define R500_HIZ_FP_INVERT_LEADING_ZEROS (1 << 15) +# define R500_TILE_OVERWRITE_RECOMPRESSION_ENABLE (0 << 16) +# define R500_TILE_OVERWRITE_RECOMPRESSION_DISABLE (1 << 16) +# define R500_CONTIGUOUS_6XAA_SAMPLES_ENABLE (0 << 17) +# define R500_CONTIGUOUS_6XAA_SAMPLES_DISABLE (1 << 17) +# define R500_PEQ_PACKING_DISABLE (0 << 18) +# define R500_PEQ_PACKING_ENABLE (1 << 18) +# define R500_COVERED_PTR_MASKING_DISABLE (0 << 18) +# define R500_COVERED_PTR_MASKING_ENABLE (1 << 18) + /* gap */ -#define R300_RB3D_DEPTHOFFSET 0x4F20 -#define R300_RB3D_DEPTHPITCH 0x4F24 -# define R300_DEPTHPITCH_MASK 0x00001FF8 /* GUESS */ -# define R300_DEPTH_TILE_ENABLE (1 << 16) /* GUESS */ -# define R300_DEPTH_MICROTILE_ENABLE (1 << 17) /* GUESS */ -# define R300_DEPTH_ENDIAN_NO_SWAP (0 << 18) /* GUESS */ -# define R300_DEPTH_ENDIAN_WORD_SWAP (1 << 18) /* GUESS */ -# define R300_DEPTH_ENDIAN_DWORD_SWAP (2 << 18) /* GUESS */ +/* Z Buffer Address Offset. + * Bits 31 to 5 are used for aligned Z buffer address offset for macro tiles. + */ +#define R300_ZB_DEPTHOFFSET 0x4f20 + +/* Z Buffer Pitch and Endian Control */ +#define R300_ZB_DEPTHPITCH 0x4f24 +# define R300_DEPTHPITCH_MASK 0x00003FFC +# define R300_DEPTHMACROTILE_DISABLE (0 << 16) +# define R300_DEPTHMACROTILE_ENABLE (1 << 16) +# define R300_DEPTHMICROTILE_LINEAR (0 << 17) +# define R300_DEPTHMICROTILE_TILED (1 << 17) +# define R300_DEPTHMICROTILE_TILED_SQUARE (2 << 17) +# define R300_DEPTHENDIAN_NO_SWAP (0 << 18) +# define R300_DEPTHENDIAN_WORD_SWAP (1 << 18) +# define R300_DEPTHENDIAN_DWORD_SWAP (2 << 18) +# define R300_DEPTHENDIAN_HALF_DWORD_SWAP (3 << 18) + +/* Z Buffer Clear Value */ +#define R300_ZB_DEPTHCLEARVALUE 0x4f28 + +#define R300_ZB_ZMASK_OFFSET 0x4f30 +#define R300_ZB_ZMASK_PITCH 0x4f34 +#define R300_ZB_ZMASK_WRINDEX 0x4f38 +#define R300_ZB_ZMASK_DWORD 0x4f3c +#define R300_ZB_ZMASK_RDINDEX 0x4f40 + +/* Hierarchical Z Memory Offset */ +#define R300_ZB_HIZ_OFFSET 0x4f44 + +/* Hierarchical Z Write Index */ +#define R300_ZB_HIZ_WRINDEX 0x4f48 + +/* Hierarchical Z Data */ +#define R300_ZB_HIZ_DWORD 0x4f4c + +/* Hierarchical Z Read Index */ +#define R300_ZB_HIZ_RDINDEX 0x4f50 + +/* Hierarchical Z Pitch */ +#define R300_ZB_HIZ_PITCH 0x4f54 + +/* Z Buffer Z Pass Counter Data */ +#define R300_ZB_ZPASS_DATA 0x4f58 + +/* Z Buffer Z Pass Counter Address */ +#define R300_ZB_ZPASS_ADDR 0x4f5c + +/* Depth buffer X and Y coordinate offset */ +#define R300_ZB_DEPTHXY_OFFSET 0x4f60 +# define R300_DEPTHX_OFFSET_SHIFT 1 +# define R300_DEPTHX_OFFSET_MASK 0x000007FE +# define R300_DEPTHY_OFFSET_SHIFT 17 +# define R300_DEPTHY_OFFSET_MASK 0x07FE0000 + +/* Sets the fifo sizes */ +#define R500_ZB_FIFO_SIZE 0x4fd0 +# define R500_OP_FIFO_SIZE_FULL (0 << 0) +# define R500_OP_FIFO_SIZE_HALF (1 << 0) +# define R500_OP_FIFO_SIZE_QUATER (2 << 0) +# define R500_OP_FIFO_SIZE_EIGTHS (4 << 0) + +/* Stencil Reference Value and Mask for backfacing quads */ +/* R300_ZB_STENCILREFMASK handles front face */ +#define R500_ZB_STENCILREFMASK_BF 0x4fd4 +# define R500_STENCILREF_SHIFT 0 +# define R500_STENCILREF_MASK 0x000000ff +# define R500_STENCILMASK_SHIFT 8 +# define R500_STENCILMASK_MASK 0x0000ff00 +# define R500_STENCILWRITEMASK_SHIFT 16 +# define R500_STENCILWRITEMASK_MASK 0x00ff0000 /* BEGIN: Vertex program instruction set */ -- cgit v1.2.3 From 598d14482380312939a3e3a4ae0657eb6b50a532 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Thu, 19 Jun 2008 14:00:37 +1000 Subject: [AGP] intel_agp: extra stolen mem size available for IGD_GM chipset This adds missing stolen memory size detect for IGD_GM, be sure to detect right size as current X intel driver (2.3.2) which has already worked out. Signed-off-by: Zhenyu Wang Signed-off-by: Dave Airlie --- drivers/char/agp/intel-agp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 02356595ac1c..e73f8f013283 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -567,13 +567,13 @@ static void intel_i830_init_gtt_entries(void) gtt_entries = 0; break; case G33_GMCH_GMS_STOLEN_128M: - if (IS_G33) + if (IS_G33 || IS_I965) gtt_entries = MB(128) - KB(size); else gtt_entries = 0; break; case G33_GMCH_GMS_STOLEN_256M: - if (IS_G33) + if (IS_G33 || IS_I965) gtt_entries = MB(256) - KB(size); else gtt_entries = 0; -- cgit v1.2.3 From 25ce77abf8be3a96b3673e46722a9bd05f149584 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Thu, 19 Jun 2008 14:17:58 +1000 Subject: [AGP] intel_agp: Add support for Intel 4 series chipsets Signed-off-by: Zhenyu Wang Signed-off-by: Dave Airlie --- drivers/char/agp/intel-agp.c | 83 ++++++++++++++++++++++++++++++++++++++------ 1 file changed, 73 insertions(+), 10 deletions(-) diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index e73f8f013283..b52988df2979 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -34,6 +34,12 @@ #define PCI_DEVICE_ID_INTEL_Q33_IG 0x29D2 #define PCI_DEVICE_ID_INTEL_IGD_HB 0x2A40 #define PCI_DEVICE_ID_INTEL_IGD_IG 0x2A42 +#define PCI_DEVICE_ID_INTEL_IGD_E_HB 0x2E00 +#define PCI_DEVICE_ID_INTEL_IGD_E_IG 0x2E02 +#define PCI_DEVICE_ID_INTEL_Q45_HB 0x2E10 +#define PCI_DEVICE_ID_INTEL_Q45_IG 0x2E12 +#define PCI_DEVICE_ID_INTEL_G45_HB 0x2E20 +#define PCI_DEVICE_ID_INTEL_G45_IG 0x2E22 /* cover 915 and 945 variants */ #define IS_I915 (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_E7221_HB || \ @@ -55,6 +61,10 @@ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q35_HB || \ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q33_HB) +#define IS_G4X (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGD_E_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q45_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G45_HB) + extern int agp_memory_reserved; @@ -80,8 +90,13 @@ extern int agp_memory_reserved; #define I915_PTEADDR 0x1C #define I915_GMCH_GMS_STOLEN_48M (0x6 << 4) #define I915_GMCH_GMS_STOLEN_64M (0x7 << 4) -#define G33_GMCH_GMS_STOLEN_128M (0x8 << 4) -#define G33_GMCH_GMS_STOLEN_256M (0x9 << 4) +#define G33_GMCH_GMS_STOLEN_128M (0x8 << 4) +#define G33_GMCH_GMS_STOLEN_256M (0x9 << 4) +#define INTEL_GMCH_GMS_STOLEN_96M (0xa << 4) +#define INTEL_GMCH_GMS_STOLEN_160M (0xb << 4) +#define INTEL_GMCH_GMS_STOLEN_224M (0xc << 4) +#define INTEL_GMCH_GMS_STOLEN_352M (0xd << 4) + #define I915_IFPADDR 0x60 /* Intel 965G registers */ @@ -506,6 +521,10 @@ static void intel_i830_init_gtt_entries(void) size = 512; } size += 4; + } else if (IS_G4X) { + /* On 4 series hardware, GTT stolen is separate from graphics + * stolen, ignore it in stolen gtt entries counting */ + size = 0; } else { /* On previous hardware, the GTT size was just what was * required to map the aperture. @@ -554,30 +573,54 @@ static void intel_i830_init_gtt_entries(void) break; case I915_GMCH_GMS_STOLEN_48M: /* Check it's really I915G */ - if (IS_I915 || IS_I965 || IS_G33) + if (IS_I915 || IS_I965 || IS_G33 || IS_G4X) gtt_entries = MB(48) - KB(size); else gtt_entries = 0; break; case I915_GMCH_GMS_STOLEN_64M: /* Check it's really I915G */ - if (IS_I915 || IS_I965 || IS_G33) + if (IS_I915 || IS_I965 || IS_G33 || IS_G4X) gtt_entries = MB(64) - KB(size); else gtt_entries = 0; break; case G33_GMCH_GMS_STOLEN_128M: - if (IS_G33 || IS_I965) + if (IS_G33 || IS_I965 || IS_G4X) gtt_entries = MB(128) - KB(size); else gtt_entries = 0; break; case G33_GMCH_GMS_STOLEN_256M: - if (IS_G33 || IS_I965) + if (IS_G33 || IS_I965 || IS_G4X) gtt_entries = MB(256) - KB(size); else gtt_entries = 0; break; + case INTEL_GMCH_GMS_STOLEN_96M: + if (IS_I965 || IS_G4X) + gtt_entries = MB(96) - KB(size); + else + gtt_entries = 0; + break; + case INTEL_GMCH_GMS_STOLEN_160M: + if (IS_I965 || IS_G4X) + gtt_entries = MB(160) - KB(size); + else + gtt_entries = 0; + break; + case INTEL_GMCH_GMS_STOLEN_224M: + if (IS_I965 || IS_G4X) + gtt_entries = MB(224) - KB(size); + else + gtt_entries = 0; + break; + case INTEL_GMCH_GMS_STOLEN_352M: + if (IS_I965 || IS_G4X) + gtt_entries = MB(352) - KB(size); + else + gtt_entries = 0; + break; default: gtt_entries = 0; break; @@ -1136,6 +1179,20 @@ static unsigned long intel_i965_mask_memory(struct agp_bridge_data *bridge, return addr | bridge->driver->masks[type].mask; } +static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size) +{ + switch (agp_bridge->dev->device) { + case PCI_DEVICE_ID_INTEL_IGD_HB: + case PCI_DEVICE_ID_INTEL_IGD_E_HB: + case PCI_DEVICE_ID_INTEL_Q45_HB: + case PCI_DEVICE_ID_INTEL_G45_HB: + *gtt_offset = *gtt_size = MB(2); + break; + default: + *gtt_offset = *gtt_size = KB(512); + } +} + /* The intel i965 automatically initializes the agp aperture during POST. * Use the memory already set aside for in the GTT. */ @@ -1156,10 +1213,7 @@ static int intel_i965_create_gatt_table(struct agp_bridge_data *bridge) temp &= 0xfff00000; - if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGD_HB) - gtt_offset = gtt_size = MB(2); - else - gtt_offset = gtt_size = KB(512); + intel_i965_get_gtt_range(>t_offset, >t_size); intel_private.gtt = ioremap((temp + gtt_offset) , gtt_size); @@ -2065,6 +2119,12 @@ static const struct intel_driver_description { NULL, &intel_g33_driver }, { PCI_DEVICE_ID_INTEL_IGD_HB, PCI_DEVICE_ID_INTEL_IGD_IG, 0, "Intel Integrated Graphics Device", NULL, &intel_i965_driver }, + { PCI_DEVICE_ID_INTEL_IGD_E_HB, PCI_DEVICE_ID_INTEL_IGD_E_IG, 0, + "Intel Integrated Graphics Device", NULL, &intel_i965_driver }, + { PCI_DEVICE_ID_INTEL_Q45_HB, PCI_DEVICE_ID_INTEL_Q45_IG, 0, + "Q45/Q43", NULL, &intel_i965_driver }, + { PCI_DEVICE_ID_INTEL_G45_HB, PCI_DEVICE_ID_INTEL_G45_IG, 0, + "G45/G43", NULL, &intel_i965_driver }, { 0, 0, 0, NULL, NULL, NULL } }; @@ -2256,6 +2316,9 @@ static struct pci_device_id agp_intel_pci_table[] = { ID(PCI_DEVICE_ID_INTEL_Q35_HB), ID(PCI_DEVICE_ID_INTEL_Q33_HB), ID(PCI_DEVICE_ID_INTEL_IGD_HB), + ID(PCI_DEVICE_ID_INTEL_IGD_E_HB), + ID(PCI_DEVICE_ID_INTEL_Q45_HB), + ID(PCI_DEVICE_ID_INTEL_G45_HB), { } }; -- cgit v1.2.3 From 62c96b9d0917894c164aa3e474a3ff3bca1554ae Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Jun 2008 14:27:53 +1000 Subject: agp/intel: cleanup some serious whitespace badness Signed-off-by: Dave Airlie --- drivers/char/agp/intel-agp.c | 134 +++++++++++++++++++++---------------------- 1 file changed, 66 insertions(+), 68 deletions(-) diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index b52988df2979..30aa01b738b4 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -1198,45 +1198,45 @@ static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size) */ static int intel_i965_create_gatt_table(struct agp_bridge_data *bridge) { - int page_order; - struct aper_size_info_fixed *size; - int num_entries; - u32 temp; - int gtt_offset, gtt_size; + int page_order; + struct aper_size_info_fixed *size; + int num_entries; + u32 temp; + int gtt_offset, gtt_size; - size = agp_bridge->current_size; - page_order = size->page_order; - num_entries = size->num_entries; - agp_bridge->gatt_table_real = NULL; + size = agp_bridge->current_size; + page_order = size->page_order; + num_entries = size->num_entries; + agp_bridge->gatt_table_real = NULL; - pci_read_config_dword(intel_private.pcidev, I915_MMADDR, &temp); + pci_read_config_dword(intel_private.pcidev, I915_MMADDR, &temp); - temp &= 0xfff00000; + temp &= 0xfff00000; intel_i965_get_gtt_range(>t_offset, >t_size); - intel_private.gtt = ioremap((temp + gtt_offset) , gtt_size); + intel_private.gtt = ioremap((temp + gtt_offset) , gtt_size); - if (!intel_private.gtt) - return -ENOMEM; + if (!intel_private.gtt) + return -ENOMEM; - intel_private.registers = ioremap(temp, 128 * 4096); - if (!intel_private.registers) { + intel_private.registers = ioremap(temp, 128 * 4096); + if (!intel_private.registers) { iounmap(intel_private.gtt); return -ENOMEM; } - temp = readl(intel_private.registers+I810_PGETBL_CTL) & 0xfffff000; - global_cache_flush(); /* FIXME: ? */ + temp = readl(intel_private.registers+I810_PGETBL_CTL) & 0xfffff000; + global_cache_flush(); /* FIXME: ? */ - /* we have to call this as early as possible after the MMIO base address is known */ - intel_i830_init_gtt_entries(); + /* we have to call this as early as possible after the MMIO base address is known */ + intel_i830_init_gtt_entries(); - agp_bridge->gatt_table = NULL; + agp_bridge->gatt_table = NULL; - agp_bridge->gatt_bus_addr = temp; + agp_bridge->gatt_bus_addr = temp; - return 0; + return 0; } @@ -1753,7 +1753,7 @@ static const struct agp_bridge_driver intel_815_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, - .agp_type_to_mask_type = agp_generic_type_to_mask_type, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; static const struct agp_bridge_driver intel_830_driver = { @@ -1954,28 +1954,26 @@ static const struct agp_bridge_driver intel_915_driver = { }; static const struct agp_bridge_driver intel_i965_driver = { - .owner = THIS_MODULE, - .aperture_sizes = intel_i830_sizes, - .size_type = FIXED_APER_SIZE, - .num_aperture_sizes = 4, - .needs_scratch_page = true, - .configure = intel_i915_configure, - .fetch_size = intel_i9xx_fetch_size, - .cleanup = intel_i915_cleanup, - .tlb_flush = intel_i810_tlbflush, - .mask_memory = intel_i965_mask_memory, - .masks = intel_i810_masks, - .agp_enable = intel_i810_agp_enable, - .cache_flush = global_cache_flush, - .create_gatt_table = intel_i965_create_gatt_table, - .free_gatt_table = intel_i830_free_gatt_table, - .insert_memory = intel_i915_insert_entries, - .remove_memory = intel_i915_remove_entries, - .alloc_by_type = intel_i830_alloc_by_type, - .free_by_type = intel_i810_free_by_type, - .agp_alloc_page = agp_generic_alloc_page, - .agp_destroy_page = agp_generic_destroy_page, - .agp_type_to_mask_type = intel_i830_type_to_mask_type, + .owner = THIS_MODULE, + .aperture_sizes = intel_i830_sizes, + .size_type = FIXED_APER_SIZE, + .num_aperture_sizes = 4, + .needs_scratch_page = true, + .cleanup = intel_i915_cleanup, + .tlb_flush = intel_i810_tlbflush, + .mask_memory = intel_i965_mask_memory, + .masks = intel_i810_masks, + .agp_enable = intel_i810_agp_enable, + .cache_flush = global_cache_flush, + .create_gatt_table = intel_i965_create_gatt_table, + .free_gatt_table = intel_i830_free_gatt_table, + .insert_memory = intel_i915_insert_entries, + .remove_memory = intel_i915_remove_entries, + .alloc_by_type = intel_i830_alloc_by_type, + .free_by_type = intel_i810_free_by_type, + .agp_alloc_page = agp_generic_alloc_page, + .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = intel_i830_type_to_mask_type, .chipset_flush = intel_i915_chipset_flush, }; @@ -2004,28 +2002,28 @@ static const struct agp_bridge_driver intel_7505_driver = { }; static const struct agp_bridge_driver intel_g33_driver = { - .owner = THIS_MODULE, - .aperture_sizes = intel_i830_sizes, - .size_type = FIXED_APER_SIZE, - .num_aperture_sizes = 4, - .needs_scratch_page = true, - .configure = intel_i915_configure, - .fetch_size = intel_i9xx_fetch_size, - .cleanup = intel_i915_cleanup, - .tlb_flush = intel_i810_tlbflush, - .mask_memory = intel_i965_mask_memory, - .masks = intel_i810_masks, - .agp_enable = intel_i810_agp_enable, - .cache_flush = global_cache_flush, - .create_gatt_table = intel_i915_create_gatt_table, - .free_gatt_table = intel_i830_free_gatt_table, - .insert_memory = intel_i915_insert_entries, - .remove_memory = intel_i915_remove_entries, - .alloc_by_type = intel_i830_alloc_by_type, - .free_by_type = intel_i810_free_by_type, - .agp_alloc_page = agp_generic_alloc_page, - .agp_destroy_page = agp_generic_destroy_page, - .agp_type_to_mask_type = intel_i830_type_to_mask_type, + .owner = THIS_MODULE, + .aperture_sizes = intel_i830_sizes, + .size_type = FIXED_APER_SIZE, + .num_aperture_sizes = 4, + .needs_scratch_page = true, + .configure = intel_i915_configure, + .fetch_size = intel_i9xx_fetch_size, + .cleanup = intel_i915_cleanup, + .tlb_flush = intel_i810_tlbflush, + .mask_memory = intel_i965_mask_memory, + .masks = intel_i810_masks, + .agp_enable = intel_i810_agp_enable, + .cache_flush = global_cache_flush, + .create_gatt_table = intel_i915_create_gatt_table, + .free_gatt_table = intel_i830_free_gatt_table, + .insert_memory = intel_i915_insert_entries, + .remove_memory = intel_i915_remove_entries, + .alloc_by_type = intel_i830_alloc_by_type, + .free_by_type = intel_i810_free_by_type, + .agp_alloc_page = agp_generic_alloc_page, + .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = intel_i830_type_to_mask_type, .chipset_flush = intel_i915_chipset_flush, }; -- cgit v1.2.3 From 0e480e5fc03c411d350478b2e8dc0906a37b6f07 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Jun 2008 14:57:31 +1000 Subject: agp: brown paper bag patch - put back the two lines it took out. no more whitespace diffs for me. Signed-off-by: Dave Airlie --- drivers/char/agp/intel-agp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 30aa01b738b4..1ae64bb36771 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -1959,6 +1959,8 @@ static const struct agp_bridge_driver intel_i965_driver = { .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 4, .needs_scratch_page = true, + .configure = intel_i915_configure, + .fetch_size = intel_i9xx_fetch_size, .cleanup = intel_i915_cleanup, .tlb_flush = intel_i810_tlbflush, .mask_memory = intel_i965_mask_memory, -- cgit v1.2.3 From 9bedbcb207ed9a571b239231d99c8fd4a34ae24d Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Jun 2008 14:57:31 +1000 Subject: agp: brown paper bag patch - put back two lines that got lost Commit 62c96b9d0917894c164aa3e474a3ff3bca1554ae ("agp/intel: cleanup some serious whitespace badness") didn't just fix whitespace. It also lost two lines. Noticed by Linus. No more whitespace diffs for me. Signed-off-by: Dave Airlie Signed-off-by: Linus Torvalds --- drivers/char/agp/intel-agp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 30aa01b738b4..1ae64bb36771 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -1959,6 +1959,8 @@ static const struct agp_bridge_driver intel_i965_driver = { .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 4, .needs_scratch_page = true, + .configure = intel_i915_configure, + .fetch_size = intel_i9xx_fetch_size, .cleanup = intel_i915_cleanup, .tlb_flush = intel_i810_tlbflush, .mask_memory = intel_i965_mask_memory, -- cgit v1.2.3 From 49307fd6f72bdd68cc2bd23e7da0bcfecf8087c9 Mon Sep 17 00:00:00 2001 From: Dario Faggioli Date: Wed, 18 Jun 2008 09:18:38 +0200 Subject: sched: NULL pointer dereference while setting sched_rt_period_us MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When CONFIG_RT_GROUP_SCHED and CONFIG_CGROUP_SCHED are enabled, with: echo 10000 > /proc/sys/kernel/sched_rt_period_us We get this: BUG: unable to handle kernel NULL pointer dereference at 0000008c [ 947.682233] IP: [] __rt_schedulable+0x12/0x160 [ 947.683123] *pde = 00000000=20 [ 947.683782] Oops: 0000 [#1] [ 947.684307] Modules linked in: [ 947.684308] [ 947.684308] Pid: 2359, comm: bash Not tainted (2.6.26-rc6 #8) [ 947.684308] EIP: 0060:[] EFLAGS: 00000246 CPU: 0 [ 947.684308] EIP is at __rt_schedulable+0x12/0x160 [ 947.684308] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001 [ 947.684308] ESI: c0521db4 EDI: 00000001 EBP: c6cc9f00 ESP: c6cc9ed0 [ 947.684308] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 947.684308] Process bash (pid: 2359, tiÆcc8000 taskÇa54f00=20 task.tiÆcc8000) [ 947.684308] Stack: c0222790 00000000 080f8c08 c0521db4 c6cc9f00 00000001 00000000 00000000 [ 947.684308] c6cc9f9c 00000000 c0521db4 00000001 c6cc9f28 c0216d40 00000000 00000000 [ 947.684308] c6cc9f9c 000f4240 000e7ef0 ffffffff c0521db4 c79dfb60 c6cc9f58 c02af2cc [ 947.684308] Call Trace: [ 947.684308] [] ? do_proc_dointvec_conv+0x0/0x50 [ 947.684308] [] ? sched_rt_handler+0x80/0x110 [ 947.684308] [] ? proc_sys_call_handler+0x9c/0xb0 [ 947.684308] [] ? proc_sys_write+0x1a/0x20 [ 947.684308] [] ? vfs_write+0x96/0x160 [ 947.684308] [] ? proc_sys_write+0x0/0x20 [ 947.684308] [] ? sys_write+0x3d/0x70 [ 947.684308] [] ? sysenter_past_esp+0x6a/0x91 [ 947.684308] ======================= [ 947.684308] Code: 24 04 e8 62 b1 0e 00 89 c7 89 f8 8b 5d f4 8b 75 f8 8b 7d fc 89 ec 5d c3 90 55 89 e5 57 56 53 83 ec 24 89 45 ec 89 55 e4 89 4d e8 <8b> b8 8c 00 00 00 85 ff 0f 84 c9 00 00 00 8b 57 24 39 55 e8 8b [ 947.684308] EIP: [] __rt_schedulable+0x12/0x160 SS:ESP 0068:c6cc9ed0 We think the following patch solves the issue. Signed-off-by: Dario Faggioli Signed-off-by: Michael Trimarchi Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index 04228524d160..320e9a43d4cc 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -8350,7 +8350,7 @@ static unsigned long to_ratio(u64 period, u64 runtime) #ifdef CONFIG_CGROUP_SCHED static int __rt_schedulable(struct task_group *tg, u64 period, u64 runtime) { - struct task_group *tgi, *parent = tg->parent; + struct task_group *tgi, *parent = tg ? tg->parent : NULL; unsigned long total = 0; if (!parent) { -- cgit v1.2.3 From 7ea56616ba6b3d67a4892728182e38ae162ea3e7 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 19 Jun 2008 09:06:56 +0200 Subject: sched: rt-group: fix hierarchy Don't re-set the entity's runqueue to the wrong rq after we've set it to the right one. Signed-off-by: Peter Zijlstra Tested-by: Daniel K. Signed-off-by: Ingo Molnar --- kernel/sched.c | 1 - 1 file changed, 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index 320e9a43d4cc..ce375cb551e9 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7628,7 +7628,6 @@ static void init_tg_rt_entry(struct task_group *tg, struct rt_rq *rt_rq, else rt_se->rt_rq = parent->my_q; - rt_se->rt_rq = &rq->rt; rt_se->my_q = rt_rq; rt_se->parent = parent; INIT_LIST_HEAD(&rt_se->run_list); -- cgit v1.2.3 From ad2a3f13b7258a5daaaeb8cff9f835aac468b71d Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 19 Jun 2008 09:06:57 +0200 Subject: sched: rt-group: heirarchy aware throttle The bandwidth throttle code dequeues a group when it runs out of quota, and re-queues it once the period rolls over and the quota gets refreshed. Sadly it failed to take the hierarchy into consideration. Share more of the enqueue/dequeue code with regular task opterations. Also, some operations like sched_setscheduler() can dequeue/enqueue tasks that are in throttled runqueues, we should not inadvertly re-enqueue empty runqueues so check for that. Signed-off-by: Peter Zijlstra Tested-by: Daniel K. Signed-off-by: Ingo Molnar --- kernel/sched_rt.c | 59 +++++++++++++++++++++++++++++++------------------------ 1 file changed, 33 insertions(+), 26 deletions(-) diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index 3432d573205d..837241568d76 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -449,13 +449,19 @@ void dec_rt_tasks(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq) #endif } -static void enqueue_rt_entity(struct sched_rt_entity *rt_se) +static void __enqueue_rt_entity(struct sched_rt_entity *rt_se) { struct rt_rq *rt_rq = rt_rq_of_se(rt_se); struct rt_prio_array *array = &rt_rq->active; struct rt_rq *group_rq = group_rt_rq(rt_se); - if (group_rq && rt_rq_throttled(group_rq)) + /* + * Don't enqueue the group if its throttled, or when empty. + * The latter is a consequence of the former when a child group + * get throttled and the current group doesn't have any other + * active members. + */ + if (group_rq && (rt_rq_throttled(group_rq) || !group_rq->rt_nr_running)) return; list_add_tail(&rt_se->run_list, array->queue + rt_se_prio(rt_se)); @@ -464,7 +470,7 @@ static void enqueue_rt_entity(struct sched_rt_entity *rt_se) inc_rt_tasks(rt_se, rt_rq); } -static void dequeue_rt_entity(struct sched_rt_entity *rt_se) +static void __dequeue_rt_entity(struct sched_rt_entity *rt_se) { struct rt_rq *rt_rq = rt_rq_of_se(rt_se); struct rt_prio_array *array = &rt_rq->active; @@ -480,11 +486,10 @@ static void dequeue_rt_entity(struct sched_rt_entity *rt_se) * Because the prio of an upper entry depends on the lower * entries, we must remove entries top - down. */ -static void dequeue_rt_stack(struct task_struct *p) +static void dequeue_rt_stack(struct sched_rt_entity *rt_se) { - struct sched_rt_entity *rt_se, *back = NULL; + struct sched_rt_entity *back = NULL; - rt_se = &p->rt; for_each_sched_rt_entity(rt_se) { rt_se->back = back; back = rt_se; @@ -492,7 +497,26 @@ static void dequeue_rt_stack(struct task_struct *p) for (rt_se = back; rt_se; rt_se = rt_se->back) { if (on_rt_rq(rt_se)) - dequeue_rt_entity(rt_se); + __dequeue_rt_entity(rt_se); + } +} + +static void enqueue_rt_entity(struct sched_rt_entity *rt_se) +{ + dequeue_rt_stack(rt_se); + for_each_sched_rt_entity(rt_se) + __enqueue_rt_entity(rt_se); +} + +static void dequeue_rt_entity(struct sched_rt_entity *rt_se) +{ + dequeue_rt_stack(rt_se); + + for_each_sched_rt_entity(rt_se) { + struct rt_rq *rt_rq = group_rt_rq(rt_se); + + if (rt_rq && rt_rq->rt_nr_running) + __enqueue_rt_entity(rt_se); } } @@ -506,32 +530,15 @@ static void enqueue_task_rt(struct rq *rq, struct task_struct *p, int wakeup) if (wakeup) rt_se->timeout = 0; - dequeue_rt_stack(p); - - /* - * enqueue everybody, bottom - up. - */ - for_each_sched_rt_entity(rt_se) - enqueue_rt_entity(rt_se); + enqueue_rt_entity(rt_se); } static void dequeue_task_rt(struct rq *rq, struct task_struct *p, int sleep) { struct sched_rt_entity *rt_se = &p->rt; - struct rt_rq *rt_rq; update_curr_rt(rq); - - dequeue_rt_stack(p); - - /* - * re-enqueue all non-empty rt_rq entities. - */ - for_each_sched_rt_entity(rt_se) { - rt_rq = group_rt_rq(rt_se); - if (rt_rq && rt_rq->rt_nr_running) - enqueue_rt_entity(rt_se); - } + dequeue_rt_entity(rt_se); } /* -- cgit v1.2.3 From 15a8641eadb492ef7c5489faa25256967bdfd303 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 19 Jun 2008 09:06:59 +0200 Subject: sched: rt-group: fix RR buglet In tick_task_rt() we first call update_curr_rt() which can dequeue a runqueue due to it running out of runtime, and then we try to requeue it, of it also having exhausted its RR quota. Obviously requeueing something that is no longer on the runqueue will not have the expected result. Signed-off-by: Peter Zijlstra Tested-by: Daniel K. Signed-off-by: Ingo Molnar --- kernel/sched_rt.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index 837241568d76..1dad5bbb59b6 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -549,8 +549,10 @@ static void requeue_rt_entity(struct rt_rq *rt_rq, struct sched_rt_entity *rt_se) { struct rt_prio_array *array = &rt_rq->active; + struct list_head *queue = array->queue + rt_se_prio(rt_se); - list_move_tail(&rt_se->run_list, array->queue + rt_se_prio(rt_se)); + if (on_rt_rq(rt_se)) + list_move_tail(&rt_se->run_list, queue); } static void requeue_task_rt(struct rq *rq, struct task_struct *p) -- cgit v1.2.3 From f18f982abf183e91f435990d337164c7a43d1e6d Mon Sep 17 00:00:00 2001 From: Max Krasnyansky Date: Thu, 29 May 2008 11:17:01 -0700 Subject: sched: CPU hotplug events must not destroy scheduler domains created by the cpusets First issue is not related to the cpusets. We're simply leaking doms_cur. It's allocated in arch_init_sched_domains() which is called for every hotplug event. So we just keep reallocation doms_cur without freeing it. I introduced free_sched_domains() function that cleans things up. Second issue is that sched domains created by the cpusets are completely destroyed by the CPU hotplug events. For all CPU hotplug events scheduler attaches all CPUs to the NULL domain and then puts them all into the single domain thereby destroying domains created by the cpusets (partition_sched_domains). The solution is simple, when cpusets are enabled scheduler should not create default domain and instead let cpusets do that. Which is exactly what the patch does. Signed-off-by: Max Krasnyansky Cc: pj@sgi.com Cc: menage@google.com Cc: rostedt@goodmis.org Acked-by: Peter Zijlstra Signed-off-by: Thomas Gleixner --- kernel/cpuset.c | 6 ++++++ kernel/sched.c | 22 ++++++++++++++++++++++ 2 files changed, 28 insertions(+) diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 039baa4cd90c..bceb89557973 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -1890,6 +1890,12 @@ static void common_cpu_mem_hotplug_unplug(void) top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY]; scan_for_empty_cpusets(&top_cpuset); + /* + * Scheduler destroys domains on hotplug events. + * Rebuild them based on the current settings. + */ + rebuild_sched_domains(); + cgroup_unlock(); } diff --git a/kernel/sched.c b/kernel/sched.c index ce375cb551e9..4a3cb0614158 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7237,6 +7237,18 @@ void __attribute__((weak)) arch_update_cpu_topology(void) { } +/* + * Free current domain masks. + * Called after all cpus are attached to NULL domain. + */ +static void free_sched_domains(void) +{ + ndoms_cur = 0; + if (doms_cur != &fallback_doms) + kfree(doms_cur); + doms_cur = &fallback_doms; +} + /* * Set up scheduler domains and groups. Callers must hold the hotplug lock. * For now this just excludes isolated cpus, but could be used to @@ -7384,6 +7396,7 @@ int arch_reinit_sched_domains(void) get_online_cpus(); mutex_lock(&sched_domains_mutex); detach_destroy_domains(&cpu_online_map); + free_sched_domains(); err = arch_init_sched_domains(&cpu_online_map); mutex_unlock(&sched_domains_mutex); put_online_cpus(); @@ -7469,6 +7482,7 @@ static int update_sched_domains(struct notifier_block *nfb, case CPU_DOWN_PREPARE: case CPU_DOWN_PREPARE_FROZEN: detach_destroy_domains(&cpu_online_map); + free_sched_domains(); return NOTIFY_OK; case CPU_UP_CANCELED: @@ -7487,8 +7501,16 @@ static int update_sched_domains(struct notifier_block *nfb, return NOTIFY_DONE; } +#ifndef CONFIG_CPUSETS + /* + * Create default domain partitioning if cpusets are disabled. + * Otherwise we let cpusets rebuild the domains based on the + * current setup. + */ + /* The hotplug lock is already held by cpu_up/cpu_down */ arch_init_sched_domains(&cpu_online_map); +#endif return NOTIFY_OK; } -- cgit v1.2.3 From 30e0e178193d4221abc9926b07a4c7661c7cc4a9 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 13 May 2008 10:27:17 +0800 Subject: cpuset: limit the input of cpuset.sched_relax_domain_level We allow the inputs to be [-1 ... SD_LV_MAX), and return -EINVAL for inputs outside this range. Signed-off-by: Li Zefan Acked-by: Paul Menage Acked-by: Paul Jackson Acked-by: Hidetoshi Seto Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- Documentation/cpusets.txt | 2 +- kernel/cpuset.c | 4 ++-- kernel/sched.c | 7 ++++++- 3 files changed, 9 insertions(+), 4 deletions(-) diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt index d803c5c68ab5..353504de3084 100644 --- a/Documentation/cpusets.txt +++ b/Documentation/cpusets.txt @@ -542,7 +542,7 @@ otherwise initial value -1 that indicates the cpuset has no request. 2 : search cores in a package. 3 : search cpus in a node [= system wide on non-NUMA system] ( 4 : search nodes in a chunk of node [on NUMA system] ) - ( 5~ : search system wide [on NUMA system]) + ( 5 : search system wide [on NUMA system] ) This file is per-cpuset and affect the sched domain where the cpuset belongs to. Therefore if the flag 'sched_load_balance' of a cpuset diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 039baa4cd90c..66103a119bfe 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -1037,8 +1037,8 @@ int current_cpuset_is_being_rebound(void) static int update_relax_domain_level(struct cpuset *cs, s64 val) { - if ((int)val < 0) - val = -1; + if (val < -1 || val >= SD_LV_MAX) + return -EINVAL; if (val != cs->relax_domain_level) { cs->relax_domain_level = val; diff --git a/kernel/sched.c b/kernel/sched.c index eaf6751e7612..bb2c699c9f5e 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -6877,7 +6877,12 @@ static int default_relax_domain_level = -1; static int __init setup_relax_domain_level(char *str) { - default_relax_domain_level = simple_strtoul(str, NULL, 0); + unsigned long val; + + val = simple_strtoul(str, NULL, 0); + if (val < SD_LV_MAX) + default_relax_domain_level = val; + return 1; } __setup("relax_domain_level=", setup_relax_domain_level); -- cgit v1.2.3 From afd38009cc3acd36d41f349a669ad5825d695b1f Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 22 May 2008 14:18:17 -0400 Subject: rcupreempt: remove export of rcu_batches_completed_bh In rcupreempt, rcu_batches_completed_bh is defined as a static inline in the header file. This does not need to be exported, and not only that, this breaks my PPC build. Signed-off-by: Steven Rostedt Cc: "Paul E. McKenney" Cc: paulus@samba.org Cc: linuxppc-dev@ozlabs.org Signed-off-by: Thomas Gleixner --- kernel/rcupreempt.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c index e1cdf196a515..5e02b7740702 100644 --- a/kernel/rcupreempt.c +++ b/kernel/rcupreempt.c @@ -217,8 +217,6 @@ long rcu_batches_completed(void) } EXPORT_SYMBOL_GPL(rcu_batches_completed); -EXPORT_SYMBOL_GPL(rcu_batches_completed_bh); - void __rcu_read_lock(void) { int idx; -- cgit v1.2.3 From 9c106c119ebedf624fbd682fd2a4d52e3c8c1a67 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Tue, 27 May 2008 12:23:29 -0500 Subject: softlockup: fix NMI hangs due to lock race - 2.6.26-rc regression The touch_nmi_watchdog() routine on x86 ultimately calls touch_softlockup_watchdog(). The problem is that to touch the softlockup watchdog, the cpu_clock code has to be called which could involve multiple cpu locks and can lead to a hard hang if one of the locks is held by a processor that is not going to return anytime soon (such as could be the case with kgdb or perhaps even with some other kind of exception). This patch causes the public version of the touch_softlockup_watchdog() to defer the cpu clock access to a later point. The test case for this problem is to use the following kernel config options: CONFIG_KGDB_TESTS=y CONFIG_KGDB_TESTS_ON_BOOT=y CONFIG_KGDB_TESTS_BOOT_STRING="V1F100I100000" It should be noted that kgdb test suite and these options were not available until 2.6.26-rc2, so it was necessary to patch the kgdb test suite during the bisection. I would consider this patch a regression fix because the problem first appeared in commit 27ec4407790d075c325e1f4da0a19c56953cce23 when some logic was added to try to periodically sync the clocks. It was possible to work around this particular problem by simply not performing the sync anytime the system was in a critical context. This was ok until commit 3e51f33fcc7f55e6df25d15b55ed10c8b4da84cd, which added config option CONFIG_HAVE_UNSTABLE_SCHED_CLOCK and some multi-cpu locks to sync the clocks. It became clear that accessing this code from an nmi was the source of the lockups. Avoiding the access to the low level clock code from an code inside the NMI processing also fixed the problem with the 27ec44... commit. Signed-off-by: Jason Wessel Signed-off-by: Ingo Molnar --- kernel/softlockup.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/kernel/softlockup.c b/kernel/softlockup.c index 01b6522fd92b..c828c2339cc9 100644 --- a/kernel/softlockup.c +++ b/kernel/softlockup.c @@ -49,12 +49,17 @@ static unsigned long get_timestamp(int this_cpu) return cpu_clock(this_cpu) >> 30LL; /* 2^30 ~= 10^9 */ } -void touch_softlockup_watchdog(void) +static void __touch_softlockup_watchdog(void) { int this_cpu = raw_smp_processor_id(); __raw_get_cpu_var(touch_timestamp) = get_timestamp(this_cpu); } + +void touch_softlockup_watchdog(void) +{ + __raw_get_cpu_var(touch_timestamp) = 0; +} EXPORT_SYMBOL(touch_softlockup_watchdog); void touch_all_softlockup_watchdogs(void) @@ -80,7 +85,7 @@ void softlockup_tick(void) unsigned long now; if (touch_timestamp == 0) { - touch_softlockup_watchdog(); + __touch_softlockup_watchdog(); return; } @@ -95,7 +100,7 @@ void softlockup_tick(void) /* do not print during early bootup: */ if (unlikely(system_state != SYSTEM_RUNNING)) { - touch_softlockup_watchdog(); + __touch_softlockup_watchdog(); return; } @@ -214,7 +219,7 @@ static int watchdog(void *__bind_cpu) sched_setscheduler(current, SCHED_FIFO, ¶m); /* initialize timestamp */ - touch_softlockup_watchdog(); + __touch_softlockup_watchdog(); set_current_state(TASK_INTERRUPTIBLE); /* @@ -223,7 +228,7 @@ static int watchdog(void *__bind_cpu) * debug-printout triggers in softlockup_tick(). */ while (!kthread_should_stop()) { - touch_softlockup_watchdog(); + __touch_softlockup_watchdog(); schedule(); if (kthread_should_stop()) -- cgit v1.2.3 From ad524d46f36bbc32033bb72ba42958f12bf49b06 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Fri, 6 Jun 2008 10:21:39 +0100 Subject: x86: set PAE PHYSICAL_MASK_SHIFT to 44 bits. When a 64-bit x86 processor runs in 32-bit PAE mode, a pte can potentially have the same number of physical address bits as the 64-bit host ("Enhanced Legacy PAE Paging"). This means, in theory, we could have up to 52 bits of physical address in a pte. The 32-bit kernel uses a 32-bit unsigned long to represent a pfn. This means that it can only represent physical addresses up to 32+12=44 bits wide. Rather than widening pfns everywhere, just set 2^44 as the Linux x86_32-PAE architectural limit for physical address size. This is a bugfix for two cases: 1. running a 32-bit PAE kernel on a machine with more than 64GB RAM. 2. running a 32-bit PAE Xen guest on a host machine with more than 64GB RAM In both cases, a pte could need to have more than 36 bits of physical, and masking it to 36-bits will cause fairly severe havoc. Signed-off-by: Jeremy Fitzhardinge Cc: Jan Beulich Cc: Signed-off-by: Ingo Molnar --- include/asm-x86/page_32.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/asm-x86/page_32.h b/include/asm-x86/page_32.h index 424e82f8ae27..ccf0ba3c3aba 100644 --- a/include/asm-x86/page_32.h +++ b/include/asm-x86/page_32.h @@ -14,7 +14,8 @@ #define __PAGE_OFFSET _AC(CONFIG_PAGE_OFFSET, UL) #ifdef CONFIG_X86_PAE -#define __PHYSICAL_MASK_SHIFT 36 +/* 44=32+12, the limit we can fit into an unsigned long pfn */ +#define __PHYSICAL_MASK_SHIFT 44 #define __VIRTUAL_MASK_SHIFT 32 #define PAGETABLE_LEVELS 3 -- cgit v1.2.3 From 75118a82e21cafb4a82b53bb85d1c7689787e046 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Fri, 13 Jun 2008 15:47:12 -0700 Subject: x86: fix NULL pointer deref in __switch_to Patrick McHardy reported a crash: > > I get this oops once a day, its apparently triggered by something > > run by cron, but the process is a different one each time. > > > > Kernel is -git from yesterday shortly before the -rc6 release > > (last commit is the usb-2.6 merge, the x86 patches are missing), > > .config is attached. > > > > I'll retry with current -git, but the patches that have gone in > > since I last updated don't look related. > > > > [62060.043009] BUG: unable to handle kernel NULL pointer dereference at > > 000001ff > > [62060.043009] IP: [] __switch_to+0x2f/0x118 > > [62060.043009] *pde = 00000000 > > [62060.043009] Oops: 0002 [#1] PREEMPT Vegard Nossum analyzed it: > This decodes to > > 0: 0f ae 00 fxsave (%eax) > > so it's related to the floating-point context. This is the exact > location of the crash: > > $ addr2line -e arch/x86/kernel/process_32.o -i ab0 > include/asm/i387.h:232 > include/asm/i387.h:262 > arch/x86/kernel/process_32.c:595 > > ...so it looks like prev_task->thread.xstate->fxsave has become NULL. > Or maybe it never had any other value. Somehow (as described below) TS_USEDFPU is set but the fpu is not allocated or freed. Another possible FPU pre-emption issue with the sleazy FPU optimization which was benign before but not so anymore, with the dynamic FPU allocation patch. New task is getting exec'd and it is prempted at the below point. flush_thread() { ... /* * Forget coprocessor state.. */ clear_fpu(tsk); <----- Preemption point clear_used_math(); ... } Now when it context switches in again, as the used_math() is still set and fpu_counter can be > 5, we will do a math_state_restore() which sets the task's TS_USEDFPU. After it continues from the above preemption point it does clear_used_math() and much later free_thread_xstate(). Now, at the next context switch, it is quite possible that xstate is null, used_math() is not set and TS_USEDFPU is still set. This will trigger unlazy_fpu() causing kernel oops. Fix this by clearing tsk's fpu_counter before clearing task's fpu. Reported-by: Patrick McHardy Signed-off-by: Suresh Siddha Signed-off-by: Ingo Molnar --- arch/x86/kernel/process_32.c | 1 + arch/x86/kernel/process_64.c | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 6d5483356e74..e2db9ac5c61c 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -333,6 +333,7 @@ void flush_thread(void) /* * Forget coprocessor state.. */ + tsk->fpu_counter = 0; clear_fpu(tsk); clear_used_math(); } diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index ac54ff56df80..c6eb5c91e5f6 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -294,6 +294,7 @@ void flush_thread(void) /* * Forget coprocessor state.. */ + tsk->fpu_counter = 0; clear_fpu(tsk); clear_used_math(); } -- cgit v1.2.3 From df17b1d990fc214f033c5588e58216ec941591e0 Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Sun, 15 Jun 2008 02:19:56 +0200 Subject: x86, 32-bit: fix boot failure on TSC-less processors Booting 2.6.26-rc6 on my 486 DX/4 fails with a "BUG: Int 6" (invalid opcode) and a kernel halt immediately after the kernel has been uncompressed. The BUG shows EIP pointing to an rdtsc instruction in native_read_tsc(), invoked from native_sched_clock(). (This error occurs so early that not even the serial console can capture it.) A bisection showed that this bug first occurs in 2.6.26-rc3-git7, via commit 9ccc906c97e34fd91dc6aaf5b69b52d824386910: >x86: distangle user disabled TSC from unstable > >tsc_enabled is set to 0 from the command line switch "notsc" and from >the mark_tsc_unstable code. Seperate those functionalities and replace >tsc_enable with tsc_disable. This makes also the native_sched_clock() >decision when to use TSC understandable. > >Preparatory patch to solve the sched_clock() issue on 32 bit. > >Signed-off-by: Thomas Gleixner The core reason for this bug is that native_sched_clock() gets called before tsc_init(). Before the commit above, tsc_32.c used a "tsc_enabled" variable which defaulted to 0 == disabled, and which only got enabled late in tsc_init(). Thus early calls to native_sched_clock() would skip the TSC and use jiffies instead. After the commit above, tsc_32.c uses a "tsc_disabled" variable which defaults to 0, meaning that the TSC is Ok to use. Early calls to native_sched_clock() now erroneously try to use the TSC on !cpu_has_tsc processors, leading to invalid opcode exceptions. My proposed fix is to initialise tsc_disabled to a "soft disabled" state distinct from the hard disabled state set up by the "notsc" kernel option. This fixes the native_sched_clock() problem. It also allows tsc_init() to be simplified: instead of setting tsc_disabled = 1 on every error return, we just set tsc_disabled = 0 once when all checks have succeeded. I've verified that this lets my 486 boot again. I've also verified that a Core2 machine still uses the TSC as clocksource after the patch. Signed-off-by: Mikael Pettersson Signed-off-by: Ingo Molnar --- arch/x86/kernel/tsc_32.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c index 068759db63dd..65b70637ad97 100644 --- a/arch/x86/kernel/tsc_32.c +++ b/arch/x86/kernel/tsc_32.c @@ -14,7 +14,10 @@ #include "mach_timer.h" -static int tsc_disabled; +/* native_sched_clock() is called before tsc_init(), so + we must start with the TSC soft disabled to prevent + erroneous rdtsc usage on !cpu_has_tsc processors */ +static int tsc_disabled = -1; /* * On some systems the TSC frequency does not @@ -402,25 +405,20 @@ void __init tsc_init(void) { int cpu; - if (!cpu_has_tsc || tsc_disabled) { - /* Disable the TSC in case of !cpu_has_tsc */ - tsc_disabled = 1; + if (!cpu_has_tsc || tsc_disabled > 0) return; - } cpu_khz = calculate_cpu_khz(); tsc_khz = cpu_khz; if (!cpu_khz) { mark_tsc_unstable("could not calculate TSC khz"); - /* - * We need to disable the TSC completely in this case - * to prevent sched_clock() from using it. - */ - tsc_disabled = 1; return; } + /* now allow native_sched_clock() to use rdtsc */ + tsc_disabled = 0; + printk("Detected %lu.%03lu MHz processor.\n", (unsigned long)cpu_khz / 1000, (unsigned long)cpu_khz % 1000); -- cgit v1.2.3 From d3942cff620bea073fc4e3c8ed878eb1e84615ce Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Sun, 8 Jun 2008 16:16:07 +0200 Subject: x86: use BOOTMEM_EXCLUSIVE on 32-bit This patch uses the BOOTMEM_EXCLUSIVE for crashkernel reservation also for i386 and prints a error message on failure. The patch is still for 2.6.26 since it is only bug fixing. The unification of reserve_crashkernel() between i386 and x86_64 should be done for 2.6.27. Signed-off-by: Bernhard Walle Signed-off-by: Ingo Molnar Cc: --- arch/x86/kernel/setup_32.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 2c5f8b213e86..5a2f8e063887 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -532,10 +532,16 @@ static void __init reserve_crashkernel(void) (unsigned long)(crash_size >> 20), (unsigned long)(crash_base >> 20), (unsigned long)(total_mem >> 20)); + + if (reserve_bootmem(crash_base, crash_size, + BOOTMEM_EXCLUSIVE) < 0) { + printk(KERN_INFO "crashkernel reservation " + "failed - memory is in use\n"); + return; + } + crashk_res.start = crash_base; crashk_res.end = crash_base + crash_size - 1; - reserve_bootmem(crash_base, crash_size, - BOOTMEM_DEFAULT); } else printk(KERN_INFO "crashkernel reservation failed - " "you have to specify a base address\n"); -- cgit v1.2.3 From ec64b6c8763c83899908fdd62746435c19211686 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 19 Jun 2008 17:07:15 +0800 Subject: Blackfin arch: fix typo error in bf548 serial header file Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- include/asm-blackfin/mach-bf548/bfin_serial_5xx.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index 59b4ad4e5b4a..aabe5b92f11c 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -187,7 +187,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart) #ifdef CONFIG_BFIN_UART1_CTSRTS peripheral_request(P_UART1_RTS, DRIVER_NAME); - peripheral_request(P_UART1_CTS DRIVER_NAME); + peripheral_request(P_UART1_CTS, DRIVER_NAME); #endif #endif @@ -202,7 +202,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart) #ifdef CONFIG_BFIN_UART3_CTSRTS peripheral_request(P_UART3_RTS, DRIVER_NAME); - peripheral_request(P_UART3_CTS DRIVER_NAME); + peripheral_request(P_UART3_CTS, DRIVER_NAME); #endif #endif SSYNC(); -- cgit v1.2.3 From f30ac0ce34f32bb998ac87e37b251374de03e603 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 19 Jun 2008 17:46:39 +0800 Subject: Blackfin Serial Driver: Use timer to poll CTS PIN instead of workqueue. This allows other threads to run when the serial driver polls the CTS PIN in a loop. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 40 ++++++++++------------- include/asm-blackfin/mach-bf527/bfin_serial_5xx.h | 2 +- include/asm-blackfin/mach-bf533/bfin_serial_5xx.h | 2 +- include/asm-blackfin/mach-bf537/bfin_serial_5xx.h | 2 +- include/asm-blackfin/mach-bf548/bfin_serial_5xx.h | 2 +- include/asm-blackfin/mach-bf561/bfin_serial_5xx.h | 2 +- 6 files changed, 23 insertions(+), 27 deletions(-) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index f20952c43cb8..fd9bb777df28 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -49,6 +49,7 @@ #define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT) #define DMA_RX_FLUSH_JIFFIES (HZ / 50) +#define CTS_CHECK_JIFFIES (HZ / 50) #ifdef CONFIG_SERIAL_BFIN_DMA static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); @@ -290,11 +291,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart) { struct circ_buf *xmit = &uart->port.info->xmit; - if (uart->port.x_char) { - UART_PUT_CHAR(uart, uart->port.x_char); - uart->port.icount.tx++; - uart->port.x_char = 0; - } /* * Check the modem control lines before * transmitting anything. @@ -306,6 +302,12 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart) return; } + if (uart->port.x_char) { + UART_PUT_CHAR(uart, uart->port.x_char); + uart->port.icount.tx++; + uart->port.x_char = 0; + } + while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) { UART_PUT_CHAR(uart, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); @@ -345,15 +347,6 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) } #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS -static void bfin_serial_do_work(struct work_struct *work) -{ - struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue); - - bfin_serial_mctrl_check(uart); -} -#endif - #ifdef CONFIG_SERIAL_BFIN_DMA static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) { @@ -361,6 +354,12 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) uart->tx_done = 0; + /* + * Check the modem control lines before + * transmitting anything. + */ + bfin_serial_mctrl_check(uart); + if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { uart->tx_count = 0; uart->tx_done = 1; @@ -373,12 +372,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) uart->port.x_char = 0; } - /* - * Check the modem control lines before - * transmitting anything. - */ - bfin_serial_mctrl_check(uart); - uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE); if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail)) uart->tx_count = UART_XMIT_SIZE - xmit->tail; @@ -565,7 +558,10 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart) uart_handle_cts_change(&uart->port, status & TIOCM_CTS); if (!(status & TIOCM_CTS)) { tty->hw_stopped = 1; - schedule_work(&uart->cts_workqueue); + uart->cts_timer.data = (unsigned long)(uart); + uart->cts_timer.function = (void *)bfin_serial_mctrl_check; + uart->cts_timer.expires = jiffies + CTS_CHECK_JIFFIES; + add_timer(&(uart->cts_timer)); } else { tty->hw_stopped = 0; } @@ -885,7 +881,7 @@ static void __init bfin_serial_init_ports(void) init_timer(&(bfin_serial_ports[i].rx_dma_timer)); #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work); + init_timer(&(bfin_serial_ports[i].cts_timer)); bfin_serial_ports[i].cts_pin = bfin_serial_resource[i].uart_cts_pin; bfin_serial_ports[i].rts_pin = diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h index 96bd09e31e36..2526b6ed6faa 100644 --- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h @@ -96,7 +96,7 @@ struct bfin_serial_port { struct work_struct tx_dma_workqueue; #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct work_struct cts_workqueue; + struct timer_list cts_timer; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h index e924569ad1d8..ebf592b59aab 100644 --- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h @@ -88,7 +88,7 @@ struct bfin_serial_port { # endif #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct work_struct cts_workqueue; + struct timer_list cts_timer; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h index 41d7b6490bb1..1bf56ffa22f9 100644 --- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h @@ -96,7 +96,7 @@ struct bfin_serial_port { struct work_struct tx_dma_workqueue; #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct work_struct cts_workqueue; + struct timer_list cts_timer; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index aabe5b92f11c..5e29446a8e03 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -99,7 +99,7 @@ struct bfin_serial_port { struct work_struct tx_dma_workqueue; #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct work_struct cts_workqueue; + struct timer_list cts_timer; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h index 30d90b580f18..8aa02780e642 100644 --- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h @@ -88,7 +88,7 @@ struct bfin_serial_port { # endif #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct work_struct cts_workqueue; + struct timer_list cts_timer; int cts_pin; int rts_pin; #endif -- cgit v1.2.3 From d38b149794e7444a55e741446717147e7f0467f8 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 3 Apr 2008 10:40:39 +0200 Subject: hwmon: (lm85) Fix function RANGE_TO_REG() Function RANGE_TO_REG() is broken. For a requested range of 2000 (2 degrees C), it will return an index value of 15, i.e. 80.0 degrees C, instead of the expected index value of 0. All other values are handled properly, just 2000 isn't. The bug was introduced back in November 2004 by this patch: http://git.kernel.org/?p=linux/kernel/git/tglx/history.git;a=commit;h=1c28d80f1992240373099d863e4996cdd5d646d0 While this can be fixed easily with the current code, I'd rather rewrite the whole function in a way which is more obviously correct. Signed-off-by: Jean Delvare Cc: Justin Thiessen Signed-off-by: Mark M. Hoffman --- drivers/hwmon/lm85.c | 25 +++++++++++-------------- 1 file changed, 11 insertions(+), 14 deletions(-) diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 182fe6a5605f..ee5eca1c1921 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -192,23 +192,20 @@ static int RANGE_TO_REG( int range ) { int i; - if ( range < lm85_range_map[0] ) { - return 0 ; - } else if ( range > lm85_range_map[15] ) { + if (range >= lm85_range_map[15]) return 15 ; - } else { /* find closest match */ - for ( i = 14 ; i >= 0 ; --i ) { - if ( range > lm85_range_map[i] ) { /* range bracketed */ - if ((lm85_range_map[i+1] - range) < - (range - lm85_range_map[i])) { - i++; - break; - } - break; - } + + /* Find the closest match */ + for (i = 14; i >= 0; --i) { + if (range >= lm85_range_map[i]) { + if ((lm85_range_map[i + 1] - range) < + (range - lm85_range_map[i])) + return i + 1; + return i; } } - return( i & 0x0f ); + + return 0; } #define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f]) -- cgit v1.2.3 From ed4ec814e45ae8b1596aea0a29b92f6c3614acaa Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 26 Apr 2008 16:34:26 +0200 Subject: hwmon: (adt7473) Initialize max_duty_at_overheat before use data->max_duty_at_overheat is not updated in adt7473_update_device, so it might be used before it is initialized (if the user reads from sysfs file max_duty_at_crit before writing to it.) Signed-off-by: Jean Delvare Acked-by: Darrick J. Wong Signed-off-by: Mark M. Hoffman --- drivers/hwmon/adt7473.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c index c1009d6f9796..93dbf5e7ff8a 100644 --- a/drivers/hwmon/adt7473.c +++ b/drivers/hwmon/adt7473.c @@ -309,6 +309,9 @@ no_sensor_update: ADT7473_REG_PWM_BHVR(i)); } + i = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4); + data->max_duty_at_overheat = !!(i & ADT7473_CFG4_MAX_DUTY_AT_OVT); + data->limits_last_updated = local_jiffies; data->limits_valid = 1; -- cgit v1.2.3 From 125ff8087fca28e922e7ad6e082efcf04fe2f0f4 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 23 Feb 2008 10:57:53 +0100 Subject: hwmon: Update the sysfs interface documentation * Document the characteristics of libsensors 3.0.0 and 3.0.1. * The sysfs interface is no longer subject to changes. Signed-off-by: Jean Delvare Acked-by: Juerg Haefliger Signed-off-by: Mark M. Hoffman --- Documentation/hwmon/sysfs-interface | 33 +++++++++++++-------------------- 1 file changed, 13 insertions(+), 20 deletions(-) diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index f4a8ebc1ef1a..2d845730d4e0 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -2,17 +2,12 @@ Naming and data format standards for sysfs files ------------------------------------------------ The libsensors library offers an interface to the raw sensors data -through the sysfs interface. See libsensors documentation and source for -further information. As of writing this document, libsensors -(from lm_sensors 2.8.3) is heavily chip-dependent. Adding or updating -support for any given chip requires modifying the library's code. -This is because libsensors was written for the procfs interface -older kernel modules were using, which wasn't standardized enough. -Recent versions of libsensors (from lm_sensors 2.8.2 and later) have -support for the sysfs interface, though. - -The new sysfs interface was designed to be as chip-independent as -possible. +through the sysfs interface. Since lm-sensors 3.0.0, libsensors is +completely chip-independent. It assumes that all the kernel drivers +implement the standard sysfs interface described in this document. +This makes adding or updating support for any given chip very easy, as +libsensors, and applications using it, do not need to be modified. +This is a major improvement compared to lm-sensors 2. Note that motherboards vary widely in the connections to sensor chips. There is no standard that ensures, for example, that the second @@ -35,19 +30,17 @@ access this data in a simple and consistent way. That said, such programs will have to implement conversion, labeling and hiding of inputs. For this reason, it is still not recommended to bypass the library. -If you are developing a userspace application please send us feedback on -this standard. - -Note that this standard isn't completely established yet, so it is subject -to changes. If you are writing a new hardware monitoring driver those -features can't seem to fit in this interface, please contact us with your -extension proposal. Keep in mind that backward compatibility must be -preserved. - Each chip gets its own directory in the sysfs /sys/devices tree. To find all sensor chips, it is easier to follow the device symlinks from /sys/class/hwmon/hwmon*. +Up to lm-sensors 3.0.0, libsensors looks for hardware monitoring attributes +in the "physical" device directory. Since lm-sensors 3.0.1, attributes found +in the hwmon "class" device directory are also supported. Complex drivers +(e.g. drivers for multifunction chips) may want to use this possibility to +avoid namespace pollution. The only drawback will be that older versions of +libsensors won't support the driver in question. + All sysfs values are fixed point numbers. There is only one value per file, unlike the older /proc specification. -- cgit v1.2.3 From 1604e78b7d6e6087ae9bde6e7a6b41cda80d6557 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 26 Feb 2008 19:34:48 +0100 Subject: hwmon: (abituguru3) Identify Abit AW8D board as such This patch identifies the Abit AW8D board as such, and adds support for its aux5 fan connector Signed-off-by: Hans de Goede Acked-by: Jean Delvare Signed-off-by: Mark M. Hoffman --- drivers/hwmon/abituguru3.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c index ed33fddc4dee..f2086e99a9cb 100644 --- a/drivers/hwmon/abituguru3.c +++ b/drivers/hwmon/abituguru3.c @@ -323,7 +323,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX1 Fan", 36, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0013, "unknown", { + { 0x0013, "Abit AW8D", { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 10, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -349,6 +349,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX2 Fan", 36, 2, 60, 1, 0 }, { "AUX3 Fan", 37, 2, 60, 1, 0 }, { "AUX4 Fan", 38, 2, 60, 1, 0 }, + { "AUX5 Fan", 39, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, { 0x0014, "Abit AB9 Pro", { -- cgit v1.2.3 From 25845c22647fad2a0852cf6bf277d84e8a7a6b4a Mon Sep 17 00:00:00 2001 From: Marc Hulsman Date: Sun, 8 Jun 2008 10:59:41 -0400 Subject: hwmon: (w83791d) new maintainer Signed-off-by: Charles Spirakis Acked-by: Jean Delvare Signed-off-by: Mark M. Hoffman --- MAINTAINERS | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 9d4304266043..fa30364d8d08 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4428,10 +4428,10 @@ M: johnpol@2ka.mipt.ru S: Maintained W83791D HARDWARE MONITORING DRIVER -P: Charles Spirakis -M: bezaur@gmail.com +P: Marc Hulsman +M: m.hulsman@tudelft.nl L: lm-sensors@lm-sensors.org -S: Odd Fixes +S: Maintained W83793 HARDWARE MONITORING DRIVER P: Rudolf Marek -- cgit v1.2.3 From b3aeab0cdbd0fe5339a3a5918b59eebf148cbcd1 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 23 May 2008 16:10:41 +0200 Subject: hwmon: (abituguru3) update driver detection It has been reported that the abituguru3 driver fails to load after a BIOS update. This patch fixes this by loosening the detection routine so that it will work after the BIOS update too. To compensate for the now very loose detection an additional check is added on the DMI Base Board vendor string to make sure we only load on Abit motherboards, this is the same as the check in the abituguru (1 / 2) driver. Signed-of-by: Hans de Goede Signed-off-by: Alistair John Strachan Signed-off-by: Mark M. Hoffman --- drivers/hwmon/abituguru3.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c index f2086e99a9cb..f00f497b9ca9 100644 --- a/drivers/hwmon/abituguru3.c +++ b/drivers/hwmon/abituguru3.c @@ -30,6 +30,7 @@ #include #include #include +#include #include /* uGuru3 bank addresses */ @@ -1112,11 +1113,12 @@ static int __init abituguru3_detect(void) { /* See if there is an uguru3 there. An idle uGuru3 will hold 0x00 or 0x08 at DATA and 0xAC at CMD. Sometimes the uGuru3 will hold 0x05 - at CMD instead, why is unknown. So we test for 0x05 too. */ + or 0x55 at CMD instead, why is unknown. */ u8 data_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_DATA); u8 cmd_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_CMD); if (((data_val == 0x00) || (data_val == 0x08)) && - ((cmd_val == 0xAC) || (cmd_val == 0x05))) + ((cmd_val == 0xAC) || (cmd_val == 0x05) || + (cmd_val == 0x55))) return ABIT_UGURU3_BASE; ABIT_UGURU3_DEBUG("no Abit uGuru3 found, data = 0x%02X, cmd = " @@ -1139,6 +1141,15 @@ static int __init abituguru3_init(void) int address, err; struct resource res = { .flags = IORESOURCE_IO }; +#ifdef CONFIG_DMI + const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); + + /* safety check, refuse to load on non Abit motherboards */ + if (!force && (!board_vendor || + strcmp(board_vendor, "http://www.abit.com.tw/"))) + return -ENODEV; +#endif + address = abituguru3_detect(); if (address < 0) return address; -- cgit v1.2.3 From bcccc3a28e9cbb44549cde326852c26203a53a56 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sat, 3 May 2008 19:19:16 -0700 Subject: hwmon: (lm75) sensor reading bugfix LM75 sensor reading bugfix: never save error status as valid sensor output. This could be improved, but at least this prevents certain rude failure modes. Signed-off-by: David Brownell Acked-by: Jean Delvare Signed-off-by: Mark M. Hoffman --- drivers/hwmon/lm75.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index fa7696905154..de698dc73020 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -251,10 +251,13 @@ static int lm75_detach_client(struct i2c_client *client) the SMBus standard. */ static int lm75_read_value(struct i2c_client *client, u8 reg) { + int value; + if (reg == LM75_REG_CONF) return i2c_smbus_read_byte_data(client, reg); - else - return swab16(i2c_smbus_read_word_data(client, reg)); + + value = i2c_smbus_read_word_data(client, reg); + return (value < 0) ? value : swab16(value); } static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value) @@ -287,9 +290,16 @@ static struct lm75_data *lm75_update_device(struct device *dev) int i; dev_dbg(&client->dev, "Starting lm75 update\n"); - for (i = 0; i < ARRAY_SIZE(data->temp); i++) - data->temp[i] = lm75_read_value(client, - LM75_REG_TEMP[i]); + for (i = 0; i < ARRAY_SIZE(data->temp); i++) { + int status; + + status = lm75_read_value(client, LM75_REG_TEMP[i]); + if (status < 0) + dev_dbg(&client->dev, "reg %d, err %d\n", + LM75_REG_TEMP[i], status); + else + data->temp[i] = status; + } data->last_updated = jiffies; data->valid = 1; } -- cgit v1.2.3 From d4abc238c9f4df8b3216f3e883f5d0a07b7ac75a Mon Sep 17 00:00:00 2001 From: Bharath Ravi Date: Mon, 16 Jun 2008 15:11:01 +0530 Subject: sched, delay accounting: fix incorrect delay time when constantly waiting on runqueue This patch corrects the incorrect value of per process run-queue wait time reported by delay statistics. The anomaly was due to the following reason. When a process leaves the CPU and immediately starts waiting for CPU on the runqueue (which means it remains in the TASK_RUNNABLE state), the time of re-entry into the run-queue is never recorded. Due to this, the waiting time on the runqueue from this point of re-entry upto the next time it hits the CPU is not accounted for. This is solved by recording the time of re-entry of a process leaving the CPU in the sched_info_depart() function IF the process will go back to waiting on the run-queue. This IF condition is verified by checking whether the process is still in the TASK_RUNNABLE state. The patch was tested on 2.6.26-rc6 using two simple CPU hog programs. The values noted prior to the fix did not account for the time spent on the runqueue waiting. After the fix, the correct values were reported back to user space. Signed-off-by: Bharath Ravi Signed-off-by: Madhava K R Cc: dhaval@linux.vnet.ibm.com Cc: vatsa@in.ibm.com Cc: balbir@in.ibm.com Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched_stats.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h index a38878e0e49d..80179ef7450e 100644 --- a/kernel/sched_stats.h +++ b/kernel/sched_stats.h @@ -198,6 +198,9 @@ static inline void sched_info_queued(struct task_struct *t) /* * Called when a process ceases being the active-running process, either * voluntarily or involuntarily. Now we can calculate how long we ran. + * Also, if the process is still in the TASK_RUNNING state, call + * sched_info_queued() to mark that it has now again started waiting on + * the runqueue. */ static inline void sched_info_depart(struct task_struct *t) { @@ -206,6 +209,9 @@ static inline void sched_info_depart(struct task_struct *t) t->sched_info.cpu_time += delta; rq_sched_info_depart(task_rq(t), delta); + + if (t->state == TASK_RUNNING) + sched_info_queued(t); } /* -- cgit v1.2.3 From ffe6e1da86d21d7855495b5a772c93f050258f6e Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Wed, 18 Jun 2008 11:34:38 -0600 Subject: x86, geode: add a VSA2 ID for General Software General Software writes their own VSA2 module for their version of the Geode BIOS, which returns a different ID then the standard VSA2. This was causing the framebuffer driver to break for most GSW boards. Signed-off-by: Jordan Crouse Cc: tglx@linutronix.de Cc: linux-geode@lists.infradead.org Signed-off-by: Ingo Molnar --- arch/x86/kernel/geode_32.c | 5 ++++- include/asm-x86/geode.h | 4 ++-- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/geode_32.c b/arch/x86/kernel/geode_32.c index e8edd63ab000..9b08e852fd1a 100644 --- a/arch/x86/kernel/geode_32.c +++ b/arch/x86/kernel/geode_32.c @@ -166,6 +166,8 @@ int geode_has_vsa2(void) static int has_vsa2 = -1; if (has_vsa2 == -1) { + u16 val; + /* * The VSA has virtual registers that we can query for a * signature. @@ -173,7 +175,8 @@ int geode_has_vsa2(void) outw(VSA_VR_UNLOCK, VSA_VRC_INDEX); outw(VSA_VR_SIGNATURE, VSA_VRC_INDEX); - has_vsa2 = (inw(VSA_VRC_DATA) == VSA_SIG); + val = inw(VSA_VRC_DATA); + has_vsa2 = (val == AMD_VSA_SIG || val == GSW_VSA_SIG); } return has_vsa2; diff --git a/include/asm-x86/geode.h b/include/asm-x86/geode.h index 6e6458853a36..bb06027fc83e 100644 --- a/include/asm-x86/geode.h +++ b/include/asm-x86/geode.h @@ -112,8 +112,8 @@ extern int geode_get_dev_base(unsigned int dev); #define VSA_VR_UNLOCK 0xFC53 /* unlock virtual register */ #define VSA_VR_SIGNATURE 0x0003 #define VSA_VR_MEM_SIZE 0x0200 -#define VSA_SIG 0x4132 /* signature is ascii 'VSA2' */ - +#define AMD_VSA_SIG 0x4132 /* signature is ascii 'VSA2' */ +#define GSW_VSA_SIG 0x534d /* General Software signature */ /* GPIO */ #define GPIO_OUTPUT_VAL 0x00 -- cgit v1.2.3 From aea7427f70cce5fa8f99ce447b213e9e3b49f24c Mon Sep 17 00:00:00 2001 From: Shan Wei Date: Thu, 19 Jun 2008 16:29:39 -0700 Subject: ipv6: Remove options header when setsockopt's optlen is 0 Remove the sticky Hop-by-Hop options header by calling setsockopt() for IPV6_HOPOPTS with a zero option length, per RFC3542. Routing header and Destination options header does the same as Hop-by-Hop options header. Signed-off-by: Shan Wei Acked-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller --- net/ipv6/ipv6_sockglue.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index c042ce19bd14..86e28a75267f 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -345,18 +345,21 @@ static int do_ipv6_setsockopt(struct sock *sk, int level, int optname, case IPV6_DSTOPTS: { struct ipv6_txoptions *opt; + + /* remove any sticky options header with a zero option + * length, per RFC3542. + */ if (optlen == 0) optval = NULL; + else if (optlen < sizeof(struct ipv6_opt_hdr) || + optlen & 0x7 || optlen > 8 * 255) + goto e_inval; /* hop-by-hop / destination options are privileged option */ retv = -EPERM; if (optname != IPV6_RTHDR && !capable(CAP_NET_RAW)) break; - if (optlen < sizeof(struct ipv6_opt_hdr) || - optlen & 0x7 || optlen > 8 * 255) - goto e_inval; - opt = ipv6_renew_options(sk, np->opt, optname, (struct ipv6_opt_hdr __user *)optval, optlen); -- cgit v1.2.3 From f630e43a215a3129d0c1173cae0bce6ea4855cf7 Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Thu, 19 Jun 2008 16:33:57 -0700 Subject: ipv6: Drop packets for loopback address from outside of the box. [ Based upon original report and patch by Karsten Keil. Karsten has verified that this fixes the TAHI test case "ICMPv6 test v6LC.5.1.2 Part F". -DaveM ] Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller --- include/net/ipv6.h | 6 ++++++ net/ipv6/ip6_input.c | 9 +++++++++ 2 files changed, 15 insertions(+) diff --git a/include/net/ipv6.h b/include/net/ipv6.h index e0a612bc9c4e..f422f7218e1c 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -367,6 +367,12 @@ static inline int ipv6_addr_any(const struct in6_addr *a) a->s6_addr32[2] | a->s6_addr32[3] ) == 0); } +static inline int ipv6_addr_loopback(const struct in6_addr *a) +{ + return ((a->s6_addr32[0] | a->s6_addr32[1] | + a->s6_addr32[2] | (a->s6_addr32[3] ^ htonl(1))) == 0); +} + static inline int ipv6_addr_v4mapped(const struct in6_addr *a) { return ((a->s6_addr32[0] | a->s6_addr32[1] | diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c index 4e5c8615832c..17eb48b8e329 100644 --- a/net/ipv6/ip6_input.c +++ b/net/ipv6/ip6_input.c @@ -102,6 +102,15 @@ int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt if (hdr->version != 6) goto err; + /* + * RFC4291 2.5.3 + * A packet received on an interface with a destination address + * of loopback must be dropped. + */ + if (!(dev->flags & IFF_LOOPBACK) && + ipv6_addr_loopback(&hdr->daddr)) + goto err; + skb->transport_header = skb->network_header + sizeof(*hdr); IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr); -- cgit v1.2.3 From 7d15ddf79ec35ce79093832c80b86c0888eb5bce Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Fri, 20 Jun 2008 11:48:06 +1000 Subject: [agp]: fixup chipset flush for new Intel G4x. Signed-off-by: Zhenyu Wang Signed-off-by: Dave Airlie --- drivers/char/agp/intel-agp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 1ae64bb36771..df702642ab8f 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -948,7 +948,7 @@ static void intel_i9xx_setup_flush(void) intel_private.ifp_resource.flags = IORESOURCE_MEM; /* Setup chipset flush for 915 */ - if (IS_I965 || IS_G33) { + if (IS_I965 || IS_G33 || IS_G4X) { intel_i965_g33_setup_chipset_flush(); } else { intel_i915_setup_chipset_flush(); -- cgit v1.2.3 From d3adbc0c582b767ba1561ffa38313e905cc917ea Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Fri, 20 Jun 2008 12:12:56 +1000 Subject: drm/i915: add support for Intel series 4 chipsets. Signed-off-by: Zhenyu Wang Signed-off-by: Dave Airlie --- drivers/char/drm/drm_pciids.h | 3 +++ drivers/char/drm/i915_drv.h | 11 +++++++++-- 2 files changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h index bad096f896ad..135bd19499fc 100644 --- a/drivers/char/drm/drm_pciids.h +++ b/drivers/char/drm/drm_pciids.h @@ -409,4 +409,7 @@ {0x8086, 0x2a02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x8086, 0x2a12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x8086, 0x2a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x8086, 0x2e02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x8086, 0x2e12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0, 0, 0} diff --git a/drivers/char/drm/i915_drv.h b/drivers/char/drm/i915_drv.h index 1b20f7c0639c..d7326d92a237 100644 --- a/drivers/char/drm/i915_drv.h +++ b/drivers/char/drm/i915_drv.h @@ -1112,12 +1112,19 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); (dev)->pci_device == 0x29A2 || \ (dev)->pci_device == 0x2A02 || \ (dev)->pci_device == 0x2A12 || \ - (dev)->pci_device == 0x2A42) + (dev)->pci_device == 0x2A42 || \ + (dev)->pci_device == 0x2E02 || \ + (dev)->pci_device == 0x2E12 || \ + (dev)->pci_device == 0x2E22) #define IS_I965GM(dev) ((dev)->pci_device == 0x2A02) #define IS_IGD_GM(dev) ((dev)->pci_device == 0x2A42) +#define IS_G4X(dev) ((dev)->pci_device == 0x2E02 || \ + (dev)->pci_device == 0x2E12 || \ + (dev)->pci_device == 0x2E22) + #define IS_G33(dev) ((dev)->pci_device == 0x29C2 || \ (dev)->pci_device == 0x29B2 || \ (dev)->pci_device == 0x29D2) @@ -1128,7 +1135,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \ IS_I945GM(dev) || IS_I965GM(dev) || IS_IGD_GM(dev)) -#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_IGD_GM(dev)) +#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_IGD_GM(dev) || IS_G4X(dev)) #define PRIMARY_RINGBUFFER_SIZE (128*1024) -- cgit v1.2.3 From 858a3685bcf3ac199128e4aa85eaae2fb9d191b5 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 20 Jun 2008 15:42:38 +1000 Subject: drm: only trust core drm ioctls - driver ioctls are a mess. So driver ioctls need a full auditing before we can make this change. Signed-off-by: Dave Airlie --- drivers/char/drm/drm_drv.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/char/drm/drm_drv.c b/drivers/char/drm/drm_drv.c index 22957ac15df4..564138714bb5 100644 --- a/drivers/char/drm/drm_drv.c +++ b/drivers/char/drm/drm_drv.c @@ -470,19 +470,18 @@ int drm_ioctl(struct inode *inode, struct file *filp, if ((nr >= DRM_COMMAND_BASE) && (nr < DRM_COMMAND_END) && (nr < DRM_COMMAND_BASE + dev->driver->num_ioctls)) ioctl = &dev->driver->ioctls[nr - DRM_COMMAND_BASE]; - else if ((nr >= DRM_COMMAND_END) || (nr < DRM_COMMAND_BASE)) + else if ((nr >= DRM_COMMAND_END) || (nr < DRM_COMMAND_BASE)) { ioctl = &drm_ioctls[nr]; - else + cmd = ioctl->cmd; + } else goto err_i1; /* Do not trust userspace, use our own definition */ - cmd = ioctl->cmd; func = ioctl->func; /* is there a local override? */ if ((nr == DRM_IOCTL_NR(DRM_IOCTL_DMA)) && dev->driver->dma_ioctl) func = dev->driver->dma_ioctl; - if (!func) { DRM_DEBUG("no function\n"); retcode = -EINVAL; -- cgit v1.2.3 From 2856922c158605514ec5974a03097eaec91f4c0d Mon Sep 17 00:00:00 2001 From: Frederic Bohe Date: Fri, 20 Jun 2008 11:48:48 -0400 Subject: Ext4: Fix online resize block group descriptor corruption This is the patch for the group descriptor table corruption during online resize pointed out by Theodore Tso. The problem was caused by the fact that the ext4 group descriptor can be either 32 or 64 bytes long. Only the 64 bytes structure was taken into account. Signed-off-by: Frederic Bohe Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" --- fs/ext4/resize.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index 9ecb92f68543..9ff7b1c04239 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -855,7 +855,8 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input) */ /* Update group descriptor block for new group */ - gdp = (struct ext4_group_desc *)primary->b_data + gdb_off; + gdp = (struct ext4_group_desc *)((char *)primary->b_data + + gdb_off * EXT4_DESC_SIZE(sb)); ext4_block_bitmap_set(sb, gdp, input->block_bitmap); /* LV FIXME */ ext4_inode_bitmap_set(sb, gdp, input->inode_bitmap); /* LV FIXME */ -- cgit v1.2.3 From 89f5b7da2a6bad2e84670422ab8192382a5aeb9f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 20 Jun 2008 11:18:25 -0700 Subject: Reinstate ZERO_PAGE optimization in 'get_user_pages()' and fix XIP KAMEZAWA Hiroyuki and Oleg Nesterov point out that since the commit 557ed1fa2620dc119adb86b34c614e152a629a80 ("remove ZERO_PAGE") removed the ZERO_PAGE from the VM mappings, any users of get_user_pages() will generally now populate the VM with real empty pages needlessly. We used to get the ZERO_PAGE when we did the "handle_mm_fault()", but since fault handling no longer uses ZERO_PAGE for new anonymous pages, we now need to handle that special case in follow_page() instead. In particular, the removal of ZERO_PAGE effectively removed the core file writing optimization where we would skip writing pages that had not been populated at all, and increased memory pressure a lot by allocating all those useless newly zeroed pages. This reinstates the optimization by making the unmapped PTE case the same as for a non-existent page table, which already did this correctly. While at it, this also fixes the XIP case for follow_page(), where the caller could not differentiate between the case of a page that simply could not be used (because it had no "struct page" associated with it) and a page that just wasn't mapped. We do that by simply returning an error pointer for pages that could not be turned into a "struct page *". The error is arbitrarily picked to be EFAULT, since that was what get_user_pages() already used for the equivalent IO-mapped page case. [ Also removed an impossible test for pte_offset_map_lock() failing: that's not how that function works ] Acked-by: Oleg Nesterov Acked-by: Nick Piggin Cc: KAMEZAWA Hiroyuki Cc: Hugh Dickins Cc: Andrew Morton Cc: Ingo Molnar Cc: Roland McGrath Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/vdso.c | 2 +- mm/memory.c | 17 +++++++++++++---- mm/migrate.c | 10 ++++++++++ 3 files changed, 24 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index c21a626af676..ce245a850db2 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -142,7 +142,7 @@ static void dump_one_vdso_page(struct page *pg, struct page *upg) printk("kpg: %p (c:%d,f:%08lx)", __va(page_to_pfn(pg) << PAGE_SHIFT), page_count(pg), pg->flags); - if (upg/* && pg != upg*/) { + if (upg && !IS_ERR(upg) /* && pg != upg*/) { printk(" upg: %p (c:%d,f:%08lx)", __va(page_to_pfn(upg) << PAGE_SHIFT), page_count(upg), diff --git a/mm/memory.c b/mm/memory.c index 19e0ae9beecb..9aefaae46858 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -999,17 +999,15 @@ struct page *follow_page(struct vm_area_struct *vma, unsigned long address, goto no_page_table; ptep = pte_offset_map_lock(mm, pmd, address, &ptl); - if (!ptep) - goto out; pte = *ptep; if (!pte_present(pte)) - goto unlock; + goto no_page; if ((flags & FOLL_WRITE) && !pte_write(pte)) goto unlock; page = vm_normal_page(vma, address, pte); if (unlikely(!page)) - goto unlock; + goto bad_page; if (flags & FOLL_GET) get_page(page); @@ -1024,6 +1022,15 @@ unlock: out: return page; +bad_page: + pte_unmap_unlock(ptep, ptl); + return ERR_PTR(-EFAULT); + +no_page: + pte_unmap_unlock(ptep, ptl); + if (!pte_none(pte)) + return page; + /* Fall through to ZERO_PAGE handling */ no_page_table: /* * When core dumping an enormous anonymous area that nobody @@ -1159,6 +1166,8 @@ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, cond_resched(); } + if (IS_ERR(page)) + return i ? i : PTR_ERR(page); if (pages) { pages[i] = page; diff --git a/mm/migrate.c b/mm/migrate.c index 449d77d409f5..112bcaeaa104 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -865,6 +865,11 @@ static int do_move_pages(struct mm_struct *mm, struct page_to_node *pm, goto set_status; page = follow_page(vma, pp->addr, FOLL_GET); + + err = PTR_ERR(page); + if (IS_ERR(page)) + goto set_status; + err = -ENOENT; if (!page) goto set_status; @@ -928,6 +933,11 @@ static int do_pages_stat(struct mm_struct *mm, struct page_to_node *pm) goto set_status; page = follow_page(vma, pm->addr, 0); + + err = PTR_ERR(page); + if (IS_ERR(page)) + goto set_status; + err = -ENOENT; /* Use PageReserved to check for zero page */ if (!page || PageReserved(page)) -- cgit v1.2.3 From ce42a54946db338e43be9a89c0f7927e02aa3a16 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 20 Jun 2008 20:53:32 +0200 Subject: palm_bk3710: fix resource management The driver expected a *virtual* address in the IDE platform device's memory resource and didn't request the memory region for the register block. Fix this taking into account the fact that DaVinci SoC devices are fixed-mapped to the virtual memory early and we can get their virtual addresses using IO_ADDRESS() macro, not having to call ioremap()... While at it, also do some cosmetic changes... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/palm_bk3710.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index d024ac8fad14..cc24803fadff 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -353,8 +353,8 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) struct clk *clkp; struct resource *mem, *irq; ide_hwif_t *hwif; - void __iomem *base; - int pribase, i; + unsigned long base; + int i; hw_regs_t hw; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; @@ -374,22 +374,27 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) printk(KERN_ERR "failed to get memory region resource\n"); return -ENODEV; } + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (irq == NULL) { printk(KERN_ERR "failed to get IRQ resource\n"); return -ENODEV; } - base = (void *)mem->start; + if (request_mem_region(mem->start, mem->end - mem->start + 1, + "palm_bk3710") == NULL) { + printk(KERN_ERR "failed to request memory region\n"); + return -EBUSY; + } + + base = IO_ADDRESS(mem->start); /* Configure the Palm Chip controller */ - palm_bk3710_chipinit(base); + palm_bk3710_chipinit((void __iomem *)base); - pribase = mem->start + IDE_PALM_ATA_PRI_REG_OFFSET; for (i = 0; i < IDE_NR_PORTS - 2; i++) - hw.io_ports_array[i] = pribase + i; - hw.io_ports.ctl_addr = mem->start + - IDE_PALM_ATA_PRI_CTL_OFFSET; + hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i; + hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET; hw.irq = irq->start; hw.chipset = ide_palm3710; @@ -434,4 +439,3 @@ static int __init palm_bk3710_init(void) module_init(palm_bk3710_init); MODULE_LICENSE("GPL"); - -- cgit v1.2.3 From f54feafa6d47d0aa1a96adefdc763b708b02f94f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 20 Jun 2008 20:53:33 +0200 Subject: ide: increase timeout in wait_drive_not_busy() Some ATAPI devices take longer than the current max timeout value to become ready (i.e. TEAC DV-W28ECW takes 6 ms) so increase the timeout value to 10 ms. This fixes kernel.org bugzilla bug #10887: http://bugzilla.kernel.org/show_bug.cgi?id=10887 Reported-by: Masanari Iida Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-taskfile.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 0c908ca3ff79..ab545ffa1549 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -225,10 +225,10 @@ static u8 wait_drive_not_busy(ide_drive_t *drive) u8 stat; /* - * Last sector was transfered, wait until drive is ready. - * This can take up to 10 usec, but we will wait max 1 ms. + * Last sector was transfered, wait until device is ready. This can + * take up to 6 ms on some ATAPI devices, so we will wait max 10 ms. */ - for (retries = 0; retries < 100; retries++) { + for (retries = 0; retries < 1000; retries++) { stat = ide_read_status(drive); if (stat & BUSY_STAT) -- cgit v1.2.3 From 74e23386b7818c7edb1252f6661806dd34042db1 Mon Sep 17 00:00:00 2001 From: Matt Reimer Date: Fri, 20 Jun 2008 20:53:34 +0200 Subject: pcmcia: add an pata/ide ID Add an id for: product info: "M-Systems", "CF300", "" manfid: 0x000a, 0x0000 function: 4 (fixed disk) Signed-off-by: Matt Reimer CC: Alan Cox CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ata/pata_pcmcia.c | 1 + drivers/ide/legacy/ide-cs.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 3d39f9dfec5a..c97bc0cd1e17 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -414,6 +414,7 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149), PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674), PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b), + PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee), PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c), PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591), diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index f633b6b3c7f3..655f43aa086f 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -439,6 +439,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149), PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674), PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b), + PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee), PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c), PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591), -- cgit v1.2.3 From a17bf220231a5061a29a27a99a273246eb3b156e Mon Sep 17 00:00:00 2001 From: Kristoffer Ericson Date: Fri, 20 Jun 2008 20:53:34 +0200 Subject: pcmcia: add another pata/ide ID Addition of Transcend 1GB 45x id so that it is properly detected. [bart: fix typo in ide-cs's ID spotted by Alan Cox] Signed-off-by: William Peters Signed-off-by: Kristoffer Ericson CC: Alan Cox CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ata/pata_pcmcia.c | 1 + drivers/ide/legacy/ide-cs.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index c97bc0cd1e17..41b4361bbf6e 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -425,6 +425,7 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6), PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003), PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 655f43aa086f..7fde9b64e95f 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -450,6 +450,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6), PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003), PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), -- cgit v1.2.3 From a49c06bfe48c43b4fea4d3789807d8393828ca8a Mon Sep 17 00:00:00 2001 From: Christophe Niclaes Date: Fri, 20 Jun 2008 20:53:34 +0200 Subject: pcmcia ide kingston compactflash's have a new manufacturer id Up to now, Kingston compactflash cards (ab)used the Toshiba Manufacturer's ID, In their new CF cards, they use a new one. Let's the ide subsystem recognize CF cards with the new id. Signed-off-by: Christophe Niclaes Acked-by: Philippe De Muyter Cc: Alan Cox Cc: Dominik Brodowski Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/legacy/ide-cs.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 7fde9b64e95f..3381424d70a1 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -410,6 +410,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */ PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704), PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */ + PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */ PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */ PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d), PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */ -- cgit v1.2.3 From ac1623625c5818bbdf5c68973098ba386ba7a004 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 20 Jun 2008 20:53:35 +0200 Subject: BAST: Remove old IDE driver Remove the old BAST IDE driver, as we are now using the platform-pata support. Signed-off-by: Ben Dooks Cc: Jeff Garzik Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 7 ---- drivers/ide/arm/Makefile | 1 - drivers/ide/arm/bast-ide.c | 90 ---------------------------------------------- 3 files changed, 98 deletions(-) delete mode 100644 drivers/ide/arm/bast-ide.c diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 1607536ff5fb..8e07de23d220 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -823,13 +823,6 @@ config BLK_DEV_IDE_RAPIDE Say Y here if you want to support the Yellowstone RapIDE controller manufactured for use with Acorn computers. -config BLK_DEV_IDE_BAST - tristate "Simtec BAST / Thorcom VR1000 IDE support" - depends on ARM && (ARCH_BAST || MACH_VR1000) - help - Say Y here if you want to support the onboard IDE channels on the - Simtec BAST or the Thorcom VR1000 - config IDE_H8300 tristate "H8300 IDE support" depends on H8300 diff --git a/drivers/ide/arm/Makefile b/drivers/ide/arm/Makefile index 936e7b0237f5..5bc26053afa6 100644 --- a/drivers/ide/arm/Makefile +++ b/drivers/ide/arm/Makefile @@ -1,7 +1,6 @@ obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o -obj-$(CONFIG_BLK_DEV_IDE_BAST) += bast-ide.o obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710) += palm_bk3710.o ifeq ($(CONFIG_IDE_ARM), m) diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c deleted file mode 100644 index 8e8c28104b45..000000000000 --- a/drivers/ide/arm/bast-ide.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include -#include -#include -#include - -#include - -#include -#include -#include -#include -#include - -#define DRV_NAME "bast-ide" - -static int __init bastide_register(unsigned int base, unsigned int aux, int irq) -{ - ide_hwif_t *hwif; - hw_regs_t hw; - int i; - u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; - - memset(&hw, 0, sizeof(hw)); - - base += BAST_IDE_CS; - aux += BAST_IDE_CS; - - for (i = 0; i <= 7; i++) { - hw.io_ports_array[i] = (unsigned long)base; - base += 0x20; - } - - hw.io_ports.ctl_addr = aux + (6 * 0x20); - hw.irq = irq; - hw.chipset = ide_generic; - - hwif = ide_find_port(); - if (hwif == NULL) - goto out; - - i = hwif->index; - - ide_init_port_data(hwif, i); - ide_init_port_hw(hwif, &hw); - hwif->port_ops = NULL; - - idx[0] = i; - - ide_device_add(idx, NULL); -out: - return 0; -} - -static int __init bastide_init(void) -{ - unsigned long base = BAST_VA_IDEPRI + BAST_IDE_CS; - - /* we can treat the VR1000 and the BAST the same */ - - if (!(machine_is_bast() || machine_is_vr1000())) - return 0; - - printk("BAST: IDE driver, (c) 2003-2004 Simtec Electronics\n"); - - if (!request_mem_region(base, 0x400000, DRV_NAME)) { - printk(KERN_ERR "%s: resources busy\n", DRV_NAME); - return -EBUSY; - } - - bastide_register(BAST_VA_IDEPRI, BAST_VA_IDEPRIAUX, IRQ_IDE0); - bastide_register(BAST_VA_IDESEC, BAST_VA_IDESECAUX, IRQ_IDE1); - - return 0; -} - -module_init(bastide_init); - -MODULE_AUTHOR("Ben Dooks "); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Simtec BAST / Thorcom VR1000 IDE driver"); -- cgit v1.2.3 From e0c6d97c65e0784aade7e97b9411f245a6c543e7 Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Fri, 20 Jun 2008 12:02:00 -0700 Subject: [IA64] SN2: security hole in sn2_ptc_proc_write Security hole in sn2_ptc_proc_write It is possible to overrun a buffer with a write to this /proc file. Signed-off-by: Cliff Wickman Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/sn2/sn2_smp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c index 49d3120415eb..6dd886c5d860 100644 --- a/arch/ia64/sn/kernel/sn2/sn2_smp.c +++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c @@ -512,6 +512,8 @@ static ssize_t sn2_ptc_proc_write(struct file *file, const char __user *user, si int cpu; char optstr[64]; + if (count > sizeof(optstr)) + return -EINVAL; if (copy_from_user(optstr, user, count)) return -EFAULT; optstr[count - 1] = '\0'; -- cgit v1.2.3 From 1f6ef2342972dc7fd623f360f84006e2304eb935 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 20 Jun 2008 12:19:28 -0700 Subject: [watchdog] hpwdt: fix use of inline assembly MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The inline assembly in drivers/watchdog/hpwdt.c was incredibly broken, and included all the function prologue and epilogue stuff, even though it was itself then inside a C function where the compiler would add its own prologue and epilogue on top of it all. This then just _happened_ to work if you had exactly the right compiler version and exactly the right compiler flags, so that gcc just happened to not create any prologue at all (the gcc-generated epilogue wouldn't matter, since it would never be reached). But the more proper way to fix it is to simply not do this. Move the inline asm to the top level, with no surrounding function at all (the better alternative would be to remove the prologue and make it actually use proper description of the arguments to the inline asm, but that's a bigger change than the one I'm willing to make right now). Tested-by: S.Çağlar Onur Acked-by: Thomas Mingarelli Signed-off-by: Linus Torvalds --- drivers/watchdog/hpwdt.c | 155 ++++++++++++++++++++++++----------------------- 1 file changed, 80 insertions(+), 75 deletions(-) diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 2686f3eaeedf..eaa3f2a79ff5 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -140,49 +140,53 @@ static struct pci_device_id hpwdt_devices[] = { }; MODULE_DEVICE_TABLE(pci, hpwdt_devices); +extern asmlinkage void asminline_call(struct cmn_registers *pi86Regs, unsigned long *pRomEntry); + #ifndef CONFIG_X86_64 /* --32 Bit Bios------------------------------------------------------------ */ #define HPWDT_ARCH 32 -asmlinkage void asminline_call(struct cmn_registers *pi86Regs, - unsigned long *pRomEntry) -{ - asm("pushl %ebp \n\t" - "movl %esp, %ebp \n\t" - "pusha \n\t" - "pushf \n\t" - "push %es \n\t" - "push %ds \n\t" - "pop %es \n\t" - "movl 8(%ebp),%eax \n\t" - "movl 4(%eax),%ebx \n\t" - "movl 8(%eax),%ecx \n\t" - "movl 12(%eax),%edx \n\t" - "movl 16(%eax),%esi \n\t" - "movl 20(%eax),%edi \n\t" - "movl (%eax),%eax \n\t" - "push %cs \n\t" - "call *12(%ebp) \n\t" - "pushf \n\t" - "pushl %eax \n\t" - "movl 8(%ebp),%eax \n\t" - "movl %ebx,4(%eax) \n\t" - "movl %ecx,8(%eax) \n\t" - "movl %edx,12(%eax) \n\t" - "movl %esi,16(%eax) \n\t" - "movl %edi,20(%eax) \n\t" - "movw %ds,24(%eax) \n\t" - "movw %es,26(%eax) \n\t" - "popl %ebx \n\t" - "movl %ebx,(%eax) \n\t" - "popl %ebx \n\t" - "movl %ebx,28(%eax) \n\t" - "pop %es \n\t" - "popf \n\t" - "popa \n\t" - "leave \n\t" "ret"); -} +asm(".text \n\t" + ".align 4 \n" + "asminline_call: \n\t" + "pushl %ebp \n\t" + "movl %esp, %ebp \n\t" + "pusha \n\t" + "pushf \n\t" + "push %es \n\t" + "push %ds \n\t" + "pop %es \n\t" + "movl 8(%ebp),%eax \n\t" + "movl 4(%eax),%ebx \n\t" + "movl 8(%eax),%ecx \n\t" + "movl 12(%eax),%edx \n\t" + "movl 16(%eax),%esi \n\t" + "movl 20(%eax),%edi \n\t" + "movl (%eax),%eax \n\t" + "push %cs \n\t" + "call *12(%ebp) \n\t" + "pushf \n\t" + "pushl %eax \n\t" + "movl 8(%ebp),%eax \n\t" + "movl %ebx,4(%eax) \n\t" + "movl %ecx,8(%eax) \n\t" + "movl %edx,12(%eax) \n\t" + "movl %esi,16(%eax) \n\t" + "movl %edi,20(%eax) \n\t" + "movw %ds,24(%eax) \n\t" + "movw %es,26(%eax) \n\t" + "popl %ebx \n\t" + "movl %ebx,(%eax) \n\t" + "popl %ebx \n\t" + "movl %ebx,28(%eax) \n\t" + "pop %es \n\t" + "popf \n\t" + "popa \n\t" + "leave \n\t" + "ret \n\t" + ".previous"); + /* * cru_detect @@ -333,43 +337,44 @@ static int __devinit detect_cru_service(void) #define HPWDT_ARCH 64 -asmlinkage void asminline_call(struct cmn_registers *pi86Regs, - unsigned long *pRomEntry) -{ - asm("pushq %rbp \n\t" - "movq %rsp, %rbp \n\t" - "pushq %rax \n\t" - "pushq %rbx \n\t" - "pushq %rdx \n\t" - "pushq %r12 \n\t" - "pushq %r9 \n\t" - "movq %rsi, %r12 \n\t" - "movq %rdi, %r9 \n\t" - "movl 4(%r9),%ebx \n\t" - "movl 8(%r9),%ecx \n\t" - "movl 12(%r9),%edx \n\t" - "movl 16(%r9),%esi \n\t" - "movl 20(%r9),%edi \n\t" - "movl (%r9),%eax \n\t" - "call *%r12 \n\t" - "pushfq \n\t" - "popq %r12 \n\t" - "popfq \n\t" - "movl %eax, (%r9) \n\t" - "movl %ebx, 4(%r9) \n\t" - "movl %ecx, 8(%r9) \n\t" - "movl %edx, 12(%r9) \n\t" - "movl %esi, 16(%r9) \n\t" - "movl %edi, 20(%r9) \n\t" - "movq %r12, %rax \n\t" - "movl %eax, 28(%r9) \n\t" - "popq %r9 \n\t" - "popq %r12 \n\t" - "popq %rdx \n\t" - "popq %rbx \n\t" - "popq %rax \n\t" - "leave \n\t" "ret"); -} +asm(".text \n\t" + ".align 4 \n" + "asminline_call: \n\t" + "pushq %rbp \n\t" + "movq %rsp, %rbp \n\t" + "pushq %rax \n\t" + "pushq %rbx \n\t" + "pushq %rdx \n\t" + "pushq %r12 \n\t" + "pushq %r9 \n\t" + "movq %rsi, %r12 \n\t" + "movq %rdi, %r9 \n\t" + "movl 4(%r9),%ebx \n\t" + "movl 8(%r9),%ecx \n\t" + "movl 12(%r9),%edx \n\t" + "movl 16(%r9),%esi \n\t" + "movl 20(%r9),%edi \n\t" + "movl (%r9),%eax \n\t" + "call *%r12 \n\t" + "pushfq \n\t" + "popq %r12 \n\t" + "popfq \n\t" + "movl %eax, (%r9) \n\t" + "movl %ebx, 4(%r9) \n\t" + "movl %ecx, 8(%r9) \n\t" + "movl %edx, 12(%r9) \n\t" + "movl %esi, 16(%r9) \n\t" + "movl %edi, 20(%r9) \n\t" + "movq %r12, %rax \n\t" + "movl %eax, 28(%r9) \n\t" + "popq %r9 \n\t" + "popq %r12 \n\t" + "popq %rdx \n\t" + "popq %rbx \n\t" + "popq %rax \n\t" + "leave \n\t" + "ret \n\t" + ".previous"); /* * dmi_find_cru -- cgit v1.2.3 From d70ac829b7f42d7ef4f879635c6a772b0b4ed0a2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 20 Jun 2008 16:19:44 -0700 Subject: Linux 2.6.26-rc7 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 6923d669a4f6..2b4977c9844e 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 26 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Rotary Wombat # *DOCUMENTATION* -- cgit v1.2.3 From 9267b4b3880d00dc2dab90f1d817c856939114f7 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Sat, 21 Jun 2008 03:25:39 +0400 Subject: alpha: fix module load failures on smp (bug #10926) To calculate addresses of locally defined variables, GCC uses 32-bit displacement from the GP. Which doesn't work for per cpu variables in modules, as an offset to the kernel per cpu area is way above 4G. The workaround is to force allocation of a GOT entry for per cpu variable using ldq instruction with a 'literal' relocation. I had to use custom asm/percpu.h, as a required argument magic doesn't work with asm-generic/percpu.h macros. Signed-off-by: Ivan Kokshaysky Signed-off-by: Linus Torvalds --- include/asm-alpha/percpu.h | 72 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 71 insertions(+), 1 deletion(-) diff --git a/include/asm-alpha/percpu.h b/include/asm-alpha/percpu.h index 48348fe34c19..82e8a94b4b2f 100644 --- a/include/asm-alpha/percpu.h +++ b/include/asm-alpha/percpu.h @@ -1,6 +1,76 @@ #ifndef __ALPHA_PERCPU_H #define __ALPHA_PERCPU_H +#include +#include -#include +/* + * Determine the real variable name from the name visible in the + * kernel sources. + */ +#define per_cpu_var(var) per_cpu__##var + +#ifdef CONFIG_SMP + +/* + * per_cpu_offset() is the offset that has to be added to a + * percpu variable to get to the instance for a certain processor. + */ +extern unsigned long __per_cpu_offset[NR_CPUS]; + +#define per_cpu_offset(x) (__per_cpu_offset[x]) + +#define __my_cpu_offset per_cpu_offset(raw_smp_processor_id()) +#ifdef CONFIG_DEBUG_PREEMPT +#define my_cpu_offset per_cpu_offset(smp_processor_id()) +#else +#define my_cpu_offset __my_cpu_offset +#endif + +#ifndef MODULE +#define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset)) +#define PER_CPU_ATTRIBUTES +#else +/* + * To calculate addresses of locally defined variables, GCC uses 32-bit + * displacement from the GP. Which doesn't work for per cpu variables in + * modules, as an offset to the kernel per cpu area is way above 4G. + * + * This forces allocation of a GOT entry for per cpu variable using + * ldq instruction with a 'literal' relocation. + */ +#define SHIFT_PERCPU_PTR(var, offset) ({ \ + extern int simple_identifier_##var(void); \ + unsigned long __ptr, tmp_gp; \ + asm ( "br %1, 1f \n\ + 1: ldgp %1, 0(%1) \n\ + ldq %0, per_cpu__" #var"(%1)\t!literal" \ + : "=&r"(__ptr), "=&r"(tmp_gp)); \ + (typeof(&per_cpu_var(var)))(__ptr + (offset)); }) + +#define PER_CPU_ATTRIBUTES __used + +#endif /* MODULE */ + +/* + * A percpu variable may point to a discarded regions. The following are + * established ways to produce a usable pointer from the percpu variable + * offset. + */ +#define per_cpu(var, cpu) \ + (*SHIFT_PERCPU_PTR(var, per_cpu_offset(cpu))) +#define __get_cpu_var(var) \ + (*SHIFT_PERCPU_PTR(var, my_cpu_offset)) +#define __raw_get_cpu_var(var) \ + (*SHIFT_PERCPU_PTR(var, __my_cpu_offset)) + +#else /* ! SMP */ + +#define per_cpu(var, cpu) (*((void)(cpu), &per_cpu_var(var))) +#define __get_cpu_var(var) per_cpu_var(var) +#define __raw_get_cpu_var(var) per_cpu_var(var) + +#endif /* SMP */ + +#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu_var(name) #endif /* __ALPHA_PERCPU_H */ -- cgit v1.2.3 From ede426923b25414f5ec9c00fefe6727d9721dd13 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Sat, 21 Jun 2008 03:26:21 +0400 Subject: alpha: link failure fix With built-in scsi disk driver, the final link fails with a following error: `.exit.text' referenced in section `.rodata' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o This happens with -Os (CONFIG_CC_OPTIMIZE_FOR_SIZE=y) with all gcc-4 versions, and also with -O2 and gcc-4.3. The problem is in sd.c:sd_major() being inlined into __exit function exit_sd(), and the compiler generating a jump table in .rodata section for the 'switch' statement in sd_major(). So we have references to discarded section. Fixed with a big hammer in the form of -fno-jump-tables. Note that jump tables vs. discarded sections is a generic problem, other architectures are just lucky not to suffer from it. But with a slightly more complex switch/case statement it can be reproduced on x86 as well. So maybe at some point we should consider -fno-jump-tables as a generic compile option... Signed-off-by: Ivan Kokshaysky Signed-off-by: Linus Torvalds --- arch/alpha/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/alpha/Makefile b/arch/alpha/Makefile index 4e1a8e2c4541..4759fe751aa1 100644 --- a/arch/alpha/Makefile +++ b/arch/alpha/Makefile @@ -13,6 +13,7 @@ NM := $(NM) -B LDFLAGS_vmlinux := -static -N #-relax CHECKFLAGS += -D__alpha__ -m64 cflags-y := -pipe -mno-fp-regs -ffixed-8 -msmall-data +cflags-y += $(call cc-option, -fno-jump-tables) cpuflags-$(CONFIG_ALPHA_EV4) := -mcpu=ev4 cpuflags-$(CONFIG_ALPHA_EV5) := -mcpu=ev5 -- cgit v1.2.3 From d559d4a24a3fed75bd890abcc1f95cd8d8dad6e1 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Sat, 21 Jun 2008 03:28:31 +0400 Subject: alpha: fix compile failures with gcc-4.3 (bug #10438) Vast majority of these build failures are gcc-4.3 warnings about static functions and objects being referenced from non-static (read: "extern inline") functions, in conjunction with our -Werror. We cannot just convert "extern inline" to "static inline", as people keep suggesting all the time, because "extern inline" logic is crucial for generic kernel build. So - just make sure that all callees of critical "extern inline" functions are also "extern inline"; - use "static inline", wherever it's possible. traps.c: work around gcc-4.3 being too smart about array bounds-checking. TODO: add "gnu_inline" attribute to all our "extern inline" functions to ensure desired behaviour with future compilers. Signed-off-by: Ivan Kokshaysky Signed-off-by: Linus Torvalds --- arch/alpha/kernel/core_t2.c | 2 ++ arch/alpha/kernel/traps.c | 3 ++- include/asm-alpha/core_mcpcia.h | 2 +- include/asm-alpha/core_t2.h | 14 +++++++------- include/asm-alpha/io.h | 6 +++--- include/asm-alpha/mmu_context.h | 6 +++--- include/asm-alpha/system.h | 10 +++++----- include/asm-alpha/vga.h | 6 +++--- 8 files changed, 26 insertions(+), 23 deletions(-) diff --git a/arch/alpha/kernel/core_t2.c b/arch/alpha/kernel/core_t2.c index c0750291b44a..d9980d47ab81 100644 --- a/arch/alpha/kernel/core_t2.c +++ b/arch/alpha/kernel/core_t2.c @@ -74,6 +74,8 @@ # define DBG(args) #endif +DEFINE_SPINLOCK(t2_hae_lock); + static volatile unsigned int t2_mcheck_any_expected; static volatile unsigned int t2_mcheck_last_taken; diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c index dc57790250d2..c778779007fc 100644 --- a/arch/alpha/kernel/traps.c +++ b/arch/alpha/kernel/traps.c @@ -447,7 +447,7 @@ struct unaligned_stat { /* Macro for exception fixup code to access integer registers. */ -#define una_reg(r) (regs->regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)]) +#define una_reg(r) (_regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)]) asmlinkage void @@ -456,6 +456,7 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg, { long error, tmp1, tmp2, tmp3, tmp4; unsigned long pc = regs->pc - 4; + unsigned long *_regs = regs->regs; const struct exception_table_entry *fixup; unaligned[0].count++; diff --git a/include/asm-alpha/core_mcpcia.h b/include/asm-alpha/core_mcpcia.h index 525b4f6a7ace..acf55b483472 100644 --- a/include/asm-alpha/core_mcpcia.h +++ b/include/asm-alpha/core_mcpcia.h @@ -261,7 +261,7 @@ struct el_MCPCIA_uncorrected_frame_mcheck { } #endif -static inline int __mcpcia_is_mmio(unsigned long addr) +extern inline int __mcpcia_is_mmio(unsigned long addr) { return (addr & 0x80000000UL) == 0; } diff --git a/include/asm-alpha/core_t2.h b/include/asm-alpha/core_t2.h index 90e6b5d6c214..46bfff58f670 100644 --- a/include/asm-alpha/core_t2.h +++ b/include/asm-alpha/core_t2.h @@ -356,13 +356,13 @@ struct el_t2_frame_corrected { #define vip volatile int * #define vuip volatile unsigned int * -static inline u8 t2_inb(unsigned long addr) +extern inline u8 t2_inb(unsigned long addr) { long result = *(vip) ((addr << 5) + T2_IO + 0x00); return __kernel_extbl(result, addr & 3); } -static inline void t2_outb(u8 b, unsigned long addr) +extern inline void t2_outb(u8 b, unsigned long addr) { unsigned long w; @@ -371,13 +371,13 @@ static inline void t2_outb(u8 b, unsigned long addr) mb(); } -static inline u16 t2_inw(unsigned long addr) +extern inline u16 t2_inw(unsigned long addr) { long result = *(vip) ((addr << 5) + T2_IO + 0x08); return __kernel_extwl(result, addr & 3); } -static inline void t2_outw(u16 b, unsigned long addr) +extern inline void t2_outw(u16 b, unsigned long addr) { unsigned long w; @@ -386,12 +386,12 @@ static inline void t2_outw(u16 b, unsigned long addr) mb(); } -static inline u32 t2_inl(unsigned long addr) +extern inline u32 t2_inl(unsigned long addr) { return *(vuip) ((addr << 5) + T2_IO + 0x18); } -static inline void t2_outl(u32 b, unsigned long addr) +extern inline void t2_outl(u32 b, unsigned long addr) { *(vuip) ((addr << 5) + T2_IO + 0x18) = b; mb(); @@ -435,7 +435,7 @@ static inline void t2_outl(u32 b, unsigned long addr) set_hae(msb); \ } -static DEFINE_SPINLOCK(t2_hae_lock); +extern spinlock_t t2_hae_lock; /* * NOTE: take T2_DENSE_MEM off in each readX/writeX routine, since diff --git a/include/asm-alpha/io.h b/include/asm-alpha/io.h index 38f18cf18c9d..e971ab000f95 100644 --- a/include/asm-alpha/io.h +++ b/include/asm-alpha/io.h @@ -35,7 +35,7 @@ * register not being up-to-date with respect to the hardware * value. */ -static inline void __set_hae(unsigned long new_hae) +extern inline void __set_hae(unsigned long new_hae) { unsigned long flags; local_irq_save(flags); @@ -49,7 +49,7 @@ static inline void __set_hae(unsigned long new_hae) local_irq_restore(flags); } -static inline void set_hae(unsigned long new_hae) +extern inline void set_hae(unsigned long new_hae) { if (new_hae != alpha_mv.hae_cache) __set_hae(new_hae); @@ -176,7 +176,7 @@ REMAP2(u64, writeq, volatile) #undef REMAP1 #undef REMAP2 -static inline void __iomem *generic_ioportmap(unsigned long a) +extern inline void __iomem *generic_ioportmap(unsigned long a) { return alpha_mv.mv_ioportmap(a); } diff --git a/include/asm-alpha/mmu_context.h b/include/asm-alpha/mmu_context.h index 6a5be1f7debf..86c08a02d239 100644 --- a/include/asm-alpha/mmu_context.h +++ b/include/asm-alpha/mmu_context.h @@ -23,7 +23,7 @@ #endif -extern inline unsigned long +static inline unsigned long __reload_thread(struct pcb_struct *pcb) { register unsigned long a0 __asm__("$16"); @@ -114,7 +114,7 @@ extern unsigned long last_asn; #define __MMU_EXTERN_INLINE #endif -static inline unsigned long +extern inline unsigned long __get_new_mm_context(struct mm_struct *mm, long cpu) { unsigned long asn = cpu_last_asn(cpu); @@ -226,7 +226,7 @@ ev4_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm) # endif #endif -extern inline int +static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm) { int i; diff --git a/include/asm-alpha/system.h b/include/asm-alpha/system.h index ed221d6408fc..afe20fa58c99 100644 --- a/include/asm-alpha/system.h +++ b/include/asm-alpha/system.h @@ -184,7 +184,7 @@ enum amask_enum { __amask; }) #define __CALL_PAL_R0(NAME, TYPE) \ -static inline TYPE NAME(void) \ +extern inline TYPE NAME(void) \ { \ register TYPE __r0 __asm__("$0"); \ __asm__ __volatile__( \ @@ -196,7 +196,7 @@ static inline TYPE NAME(void) \ } #define __CALL_PAL_W1(NAME, TYPE0) \ -static inline void NAME(TYPE0 arg0) \ +extern inline void NAME(TYPE0 arg0) \ { \ register TYPE0 __r16 __asm__("$16") = arg0; \ __asm__ __volatile__( \ @@ -207,7 +207,7 @@ static inline void NAME(TYPE0 arg0) \ } #define __CALL_PAL_W2(NAME, TYPE0, TYPE1) \ -static inline void NAME(TYPE0 arg0, TYPE1 arg1) \ +extern inline void NAME(TYPE0 arg0, TYPE1 arg1) \ { \ register TYPE0 __r16 __asm__("$16") = arg0; \ register TYPE1 __r17 __asm__("$17") = arg1; \ @@ -219,7 +219,7 @@ static inline void NAME(TYPE0 arg0, TYPE1 arg1) \ } #define __CALL_PAL_RW1(NAME, RTYPE, TYPE0) \ -static inline RTYPE NAME(TYPE0 arg0) \ +extern inline RTYPE NAME(TYPE0 arg0) \ { \ register RTYPE __r0 __asm__("$0"); \ register TYPE0 __r16 __asm__("$16") = arg0; \ @@ -232,7 +232,7 @@ static inline RTYPE NAME(TYPE0 arg0) \ } #define __CALL_PAL_RW2(NAME, RTYPE, TYPE0, TYPE1) \ -static inline RTYPE NAME(TYPE0 arg0, TYPE1 arg1) \ +extern inline RTYPE NAME(TYPE0 arg0, TYPE1 arg1) \ { \ register RTYPE __r0 __asm__("$0"); \ register TYPE0 __r16 __asm__("$16") = arg0; \ diff --git a/include/asm-alpha/vga.h b/include/asm-alpha/vga.h index e8df1e7aae6b..c00106bac521 100644 --- a/include/asm-alpha/vga.h +++ b/include/asm-alpha/vga.h @@ -13,7 +13,7 @@ #define VT_BUF_HAVE_MEMSETW #define VT_BUF_HAVE_MEMCPYW -extern inline void scr_writew(u16 val, volatile u16 *addr) +static inline void scr_writew(u16 val, volatile u16 *addr) { if (__is_ioaddr(addr)) __raw_writew(val, (volatile u16 __iomem *) addr); @@ -21,7 +21,7 @@ extern inline void scr_writew(u16 val, volatile u16 *addr) *addr = val; } -extern inline u16 scr_readw(volatile const u16 *addr) +static inline u16 scr_readw(volatile const u16 *addr) { if (__is_ioaddr(addr)) return __raw_readw((volatile const u16 __iomem *) addr); @@ -29,7 +29,7 @@ extern inline u16 scr_readw(volatile const u16 *addr) return *addr; } -extern inline void scr_memsetw(u16 *s, u16 c, unsigned int count) +static inline void scr_memsetw(u16 *s, u16 c, unsigned int count) { if (__is_ioaddr(s)) memsetw_io((u16 __iomem *) s, c, count); -- cgit v1.2.3 From a744e0160ac5804b763449aa34d3991dc21af0be Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Sat, 21 Jun 2008 03:28:54 +0400 Subject: alpha: resurrect Cypress IDE quirk Which was removed in the hope that generic legacy IDE quirk in drivers/pci/probe.c is sufficient for Cypress IDE. It isn't, as this controller has non-standard BAR layout: secondary channel registers are in the BAR0-1 of the second PCI function - not in the BAR2-3 of the same function, as the generic quirk routine assumes. Signed-off-by: Ivan Kokshaysky Signed-off-by: Linus Torvalds --- arch/alpha/kernel/pci.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c index 36ab22a7ea12..5cf45fc51343 100644 --- a/arch/alpha/kernel/pci.c +++ b/arch/alpha/kernel/pci.c @@ -71,6 +71,23 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_i static void __init quirk_cypress(struct pci_dev *dev) { + /* The Notorious Cy82C693 chip. */ + + /* The generic legacy mode IDE fixup in drivers/pci/probe.c + doesn't work correctly with the Cypress IDE controller as + it has non-standard register layout. Fix that. */ + if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE) { + dev->resource[2].start = dev->resource[3].start = 0; + dev->resource[2].end = dev->resource[3].end = 0; + dev->resource[2].flags = dev->resource[3].flags = 0; + if (PCI_FUNC(dev->devfn) == 2) { + dev->resource[0].start = 0x170; + dev->resource[0].end = 0x177; + dev->resource[1].start = 0x376; + dev->resource[1].end = 0x376; + } + } + /* The Cypress bridge responds on the PCI bus in the address range 0xffff0000-0xffffffff (conventional x86 BIOS ROM). There is no way to turn this off. The bridge also supports several extended -- cgit v1.2.3 From 2645a3c3761ac25498db2e627271016c849c68e1 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 20 Jun 2008 21:58:02 -0700 Subject: pppoe: warning fix Fix warning: drivers/net/pppoe.c: In function 'pppoe_recvmsg': drivers/net/pppoe.c:945: warning: comparison of distinct pointer types lacks a cast because skb->len is unsigned int and total_len is size_t Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/pppoe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index bafb69b6f7cb..fc6f4b8c64b3 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -942,7 +942,7 @@ static int pppoe_recvmsg(struct kiocb *iocb, struct socket *sock, m->msg_namelen = 0; if (skb) { - total_len = min(total_len, skb->len); + total_len = min_t(size_t, total_len, skb->len); error = skb_copy_datagram_iovec(skb, 0, m->msg_iov, total_len); if (error == 0) error = total_len; -- cgit v1.2.3 From 735ce972fbc8a65fb17788debd7bbe7b4383cc62 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 20 Jun 2008 22:04:34 -0700 Subject: sctp: Make sure N * sizeof(union sctp_addr) does not overflow. As noticed by Gabriel Campana, the kmalloc() length arg passed in by sctp_getsockopt_local_addrs_old() can overflow if ->addr_num is large enough. Therefore, enforce an appropriate limit. Signed-off-by: David S. Miller --- net/sctp/socket.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index e7e3baf7009e..0dbcde6758ea 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -4401,7 +4401,9 @@ static int sctp_getsockopt_local_addrs_old(struct sock *sk, int len, if (copy_from_user(&getaddrs, optval, len)) return -EFAULT; - if (getaddrs.addr_num <= 0) return -EINVAL; + if (getaddrs.addr_num <= 0 || + getaddrs.addr_num >= (INT_MAX / sizeof(union sctp_addr))) + return -EINVAL; /* * For UDP-style sockets, id specifies the association to query. * If the id field is set to the value '0' then the locally bound -- cgit v1.2.3 From b9f75f45a6b46a0ab4eb0857d437a0845871f314 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Fri, 20 Jun 2008 22:16:51 -0700 Subject: netns: Don't receive new packets in a dead network namespace. Alexey Dobriyan writes: > Subject: ICMP sockets destruction vs ICMP packets oops > After icmp_sk_exit() nuked ICMP sockets, we get an interrupt. > icmp_reply() wants ICMP socket. > > Steps to reproduce: > > launch shell in new netns > move real NIC to netns > setup routing > ping -i 0 > exit from shell > > BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 > IP: [] icmp_sk+0x17/0x30 > PGD 17f3cd067 PUD 17f3ce067 PMD 0 > Oops: 0000 [1] PREEMPT SMP DEBUG_PAGEALLOC > CPU 0 > Modules linked in: usblp usbcore > Pid: 0, comm: swapper Not tainted 2.6.26-rc6-netns-ct #4 > RIP: 0010:[] [] icmp_sk+0x17/0x30 > RSP: 0018:ffffffff8057fc30 EFLAGS: 00010286 > RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff81017c7db900 > RDX: 0000000000000034 RSI: ffff81017c7db900 RDI: ffff81017dc41800 > RBP: ffffffff8057fc40 R08: 0000000000000001 R09: 000000000000a815 > R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff8057fd28 > R13: ffffffff8057fd00 R14: ffff81017c7db938 R15: ffff81017dc41800 > FS: 0000000000000000(0000) GS:ffffffff80525000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b > CR2: 0000000000000000 CR3: 000000017fcda000 CR4: 00000000000006e0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Process swapper (pid: 0, threadinfo ffffffff8053a000, task ffffffff804fa4a0) > Stack: 0000000000000000 ffff81017c7db900 ffffffff8057fcf0 ffffffff803fcfe4 > ffffffff804faa38 0000000000000246 0000000000005a40 0000000000000246 > 000000000001ffff ffff81017dd68dc0 0000000000005a40 0000000055342436 > Call Trace: > [] icmp_reply+0x44/0x1e0 > [] ? ip_route_input+0x23a/0x1360 > [] icmp_echo+0x65/0x70 > [] icmp_rcv+0x180/0x1b0 > [] ip_local_deliver+0xf4/0x1f0 > [] ip_rcv+0x33b/0x650 > [] netif_receive_skb+0x27a/0x340 > [] process_backlog+0x9d/0x100 > [] net_rx_action+0x18d/0x250 > [] __do_softirq+0x75/0x100 > [] call_softirq+0x1c/0x30 > [] do_softirq+0x65/0xa0 > [] irq_exit+0x97/0xa0 > [] do_IRQ+0xa8/0x130 > [] ? mwait_idle+0x0/0x60 > [] ret_from_intr+0x0/0xf > [] ? mwait_idle+0x4c/0x60 > [] ? mwait_idle+0x43/0x60 > [] ? cpu_idle+0x57/0xa0 > [] ? rest_init+0x70/0x80 > Code: 10 5b 41 5c 41 5d 41 5e c9 c3 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 > 48 83 ec 08 48 8b 9f 78 01 00 00 e8 2b c7 f1 ff 89 c0 <48> 8b 04 c3 48 83 c4 08 > 5b c9 c3 66 66 66 66 66 2e 0f 1f 84 00 > RIP [] icmp_sk+0x17/0x30 > RSP > CR2: 0000000000000000 > ---[ end trace ea161157b76b33e8 ]--- > Kernel panic - not syncing: Aiee, killing interrupt handler! Receiving packets while we are cleaning up a network namespace is a racy proposition. It is possible when the packet arrives that we have removed some but not all of the state we need to fully process it. We have the choice of either playing wack-a-mole with the cleanup routines or simply dropping packets when we don't have a network namespace to handle them. Since the check looks inexpensive in netif_receive_skb let's just drop the incoming packets. Signed-off-by: Eric W. Biederman Signed-off-by: David S. Miller --- include/net/net_namespace.h | 11 +++++++++++ net/core/dev.c | 4 ++++ net/core/net_namespace.c | 3 +++ 3 files changed, 18 insertions(+) diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h index aa540e6be502..d9dd0f707296 100644 --- a/include/net/net_namespace.h +++ b/include/net/net_namespace.h @@ -95,6 +95,11 @@ extern struct list_head net_namespace_list; #ifdef CONFIG_NET_NS extern void __put_net(struct net *net); +static inline int net_alive(struct net *net) +{ + return net && atomic_read(&net->count); +} + static inline struct net *get_net(struct net *net) { atomic_inc(&net->count); @@ -125,6 +130,12 @@ int net_eq(const struct net *net1, const struct net *net2) return net1 == net2; } #else + +static inline int net_alive(struct net *net) +{ + return 1; +} + static inline struct net *get_net(struct net *net) { return net; diff --git a/net/core/dev.c b/net/core/dev.c index 68d8df0992ab..c421a1f8f0b9 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2077,6 +2077,10 @@ int netif_receive_skb(struct sk_buff *skb) rcu_read_lock(); + /* Don't receive packets in an exiting network namespace */ + if (!net_alive(dev_net(skb->dev))) + goto out; + #ifdef CONFIG_NET_CLS_ACT if (skb->tc_verd & TC_NCLS) { skb->tc_verd = CLR_TC_NCLS(skb->tc_verd); diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c index 72b4c184dd84..7c52fe277b62 100644 --- a/net/core/net_namespace.c +++ b/net/core/net_namespace.c @@ -140,6 +140,9 @@ static void cleanup_net(struct work_struct *work) struct pernet_operations *ops; struct net *net; + /* Be very certain incoming network packets will not find us */ + rcu_barrier(); + net = container_of(work, struct net, work); mutex_lock(&net_mutex); -- cgit v1.2.3 From 71c2742f5e6348d76ee62085cf0a13e5eff0f00e Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Sat, 21 Jun 2008 19:01:02 +0200 Subject: Add return value to reserve_bootmem_node() This patch changes the function reserve_bootmem_node() from void to int, returning -ENOMEM if the allocation fails. This fixes a build problem on x86 with CONFIG_KEXEC=y and CONFIG_NEED_MULTIPLE_NODES=y Signed-off-by: Bernhard Walle Reported-by: Adrian Bunk Signed-off-by: Linus Torvalds --- include/linux/bootmem.h | 2 +- mm/bootmem.c | 6 ++++-- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h index 6a5dbdc8a7dc..686895bacd9d 100644 --- a/include/linux/bootmem.h +++ b/include/linux/bootmem.h @@ -94,7 +94,7 @@ extern unsigned long init_bootmem_node(pg_data_t *pgdat, unsigned long freepfn, unsigned long startpfn, unsigned long endpfn); -extern void reserve_bootmem_node(pg_data_t *pgdat, +extern int reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr, unsigned long size, int flags); diff --git a/mm/bootmem.c b/mm/bootmem.c index e8fb927392b9..8d9f60e06f62 100644 --- a/mm/bootmem.c +++ b/mm/bootmem.c @@ -442,15 +442,17 @@ unsigned long __init init_bootmem_node(pg_data_t *pgdat, unsigned long freepfn, return init_bootmem_core(pgdat, freepfn, startpfn, endpfn); } -void __init reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr, +int __init reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr, unsigned long size, int flags) { int ret; ret = can_reserve_bootmem_core(pgdat->bdata, physaddr, size, flags); if (ret < 0) - return; + return -ENOMEM; reserve_bootmem_core(pgdat->bdata, physaddr, size, flags); + + return 0; } void __init free_bootmem_node(pg_data_t *pgdat, unsigned long physaddr, -- cgit v1.2.3 From 481c5346d0981940ee63037eb53e4e37b0735c10 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Sat, 21 Jun 2008 16:46:35 -0700 Subject: Slab: Fix memory leak in fallback_alloc() The zonelist patches caused the loop that checks for available objects in permitted zones to not terminate immediately. One object per zone per allocation may be allocated and then abandoned. Break the loop when we have successfully allocated one object. Signed-off-by: Christoph Lameter Signed-off-by: Linus Torvalds --- mm/slab.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/mm/slab.c b/mm/slab.c index 06236e4ddc1b..046607f05f3e 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -3263,9 +3263,12 @@ retry: if (cpuset_zone_allowed_hardwall(zone, flags) && cache->nodelists[nid] && - cache->nodelists[nid]->free_objects) + cache->nodelists[nid]->free_objects) { obj = ____cache_alloc_node(cache, flags | GFP_THISNODE, nid); + if (obj) + break; + } } if (!obj) { -- cgit v1.2.3