From 4dba4185e3d984a7a856dfaeb7e8aec26633e845 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 18 Dec 2014 19:10:35 +0800 Subject: ARM: dts: sunxi: Fix usb-phy support for sun4i/sun5i usbphy0 support in the sunxi usb-phy driver has been merged, but the dtsi's for sun4i/sun5i haven't been updated. This results in the phy driver failing to load, breaking usb support. Fixes: 6827a46f5994 ('phy: sun4i: add support for USB phy0') Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10.dtsi | 4 ++-- arch/arm/boot/dts/sun5i-a10s.dtsi | 4 ++-- arch/arm/boot/dts/sun5i-a13.dtsi | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 7b4099fcf817..e3422309e54b 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -438,8 +438,8 @@ reg-names = "phy_ctrl", "pmu1", "pmu2"; clocks = <&usb_clk 8>; clock-names = "usb_phy"; - resets = <&usb_clk 1>, <&usb_clk 2>; - reset-names = "usb1_reset", "usb2_reset"; + resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>; + reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 1b76667f3182..3c3c1920788a 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -390,8 +390,8 @@ reg-names = "phy_ctrl", "pmu1"; clocks = <&usb_clk 8>; clock-names = "usb_phy"; - resets = <&usb_clk 1>; - reset-names = "usb1_reset"; + resets = <&usb_clk 0>, <&usb_clk 1>; + reset-names = "usb0_reset", "usb1_reset"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index c35217ea1f64..2448d7f38d6b 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -349,8 +349,8 @@ reg-names = "phy_ctrl", "pmu1"; clocks = <&usb_clk 8>; clock-names = "usb_phy"; - resets = <&usb_clk 1>; - reset-names = "usb1_reset"; + resets = <&usb_clk 0>, <&usb_clk 1>; + reset-names = "usb0_reset", "usb1_reset"; status = "disabled"; }; -- cgit v1.2.3 From 6ba8bbe8e283674bd9737bcb31a9c55ba4f8fbee Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 25 Dec 2014 13:25:19 +0100 Subject: ARM: dts: sun6i: ippo-q8h-v5: Fix serial0 alias The Ippo q8h has its serial console connected to the r-uart. Adjust the serial0 alias to match. This fixes the kernel serial console no longer working since 3.19-rc1, because 8250_dw.c now honors dt aliases, causing the serial console to be ttyS5 rather then being ttyS0, as it was in 3.18 and before. Note that adjusting bootargs instead is not an acceptable fix, because console=ttyS0,115200 is used by a lot of bootscripts, etc. and this should continue to work. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts index 7f2117ce6985..32ad80804dbb 100644 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts @@ -55,6 +55,10 @@ model = "Ippo Q8H Dual Core Tablet (v5)"; compatible = "ippo,q8h-v5", "allwinner,sun8i-a23"; + aliases { + serial0 = &r_uart; + }; + chosen { bootargs = "earlyprintk console=ttyS0,115200"; }; -- cgit v1.2.3 From 8cedd6628472aa2d8f2f54dfcc36633e46a59db8 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 19 Jan 2015 14:01:17 +0100 Subject: ARM: dts: sun4i: Add simplefb node with de_fe0-de_be0-lcd0-hdmi pipeline Testing has shown that on sun4i the display backend engine does not have deep enough fifo-s causing flickering / tearing in full-hd mode due to fifo underruns. This can be avoided by letting the display frontend engine do the dma from memory, and then letting it feed the data directly into the backend unmodified, as the frontend does have deep enough fifo-s. Note since u-boot-v2015.01 has been released using the de_be0-lcd0-hdmi pipeline on sun4i, we need to keep that one around too (unfortunately). Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index e3422309e54b..3b25de8f5fce 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -39,6 +39,14 @@ <&ahb_gates 44>; status = "disabled"; }; + + framebuffer@1 { + compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi"; + clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, + <&ahb_gates 44>, <&ahb_gates 46>; + status = "disabled"; + }; }; cpus { -- cgit v1.2.3 From 117a2cc38ffe0b46bcc6f991a3534b345477439c Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 22 Jan 2015 22:10:54 +0100 Subject: ARM: sunxi: dt: Fix aliases Commit f77d55a3b56a ("serial: 8250_dw: get index of serial line from DT aliases") made the serial driver now use the serial aliases to get the tty number, pointing out that our aliases have been wrong all along. Remove them from the DTSI and add custom ones in the relevant boards. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10.dtsi | 8 -------- arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 6 ++++++ arch/arm/boot/dts/sun5i-a10s.dtsi | 4 ---- arch/arm/boot/dts/sun5i-a13-hsg-h702.dts | 4 ++++ arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 4 ++++ arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 4 ++++ arch/arm/boot/dts/sun5i-a13.dtsi | 5 ----- arch/arm/boot/dts/sun6i-a31.dtsi | 6 ------ arch/arm/boot/dts/sun7i-a20-bananapi.dts | 6 ++++++ arch/arm/boot/dts/sun7i-a20-hummingbird.dts | 8 ++++++++ arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 3 +++ arch/arm/boot/dts/sun7i-a20.dtsi | 8 -------- arch/arm/boot/dts/sun8i-a23.dtsi | 9 --------- arch/arm/boot/dts/sun9i-a80-optimus.dts | 5 +++++ arch/arm/boot/dts/sun9i-a80.dtsi | 10 ---------- 15 files changed, 40 insertions(+), 50 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 3b25de8f5fce..d5c4669224b1 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -17,14 +17,6 @@ aliases { ethernet0 = &emac; - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; - serial5 = &uart5; - serial6 = &uart6; - serial7 = &uart7; }; chosen { diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index fe3c559ca6a8..bfa742817690 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -55,6 +55,12 @@ model = "Olimex A10s-Olinuxino Micro"; compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s"; + aliases { + serial0 = &uart0; + serial1 = &uart2; + serial2 = &uart3; + }; + soc@01c00000 { emac: ethernet@01c0b000 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 3c3c1920788a..2e7d8263799d 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -18,10 +18,6 @@ aliases { ethernet0 = &emac; - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; }; chosen { diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index eeed1f236ee8..c7be3abd9fcc 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -53,6 +53,10 @@ model = "HSG H702"; compatible = "hsg,h702", "allwinner,sun5i-a13"; + aliases { + serial0 = &uart1; + }; + soc@01c00000 { mmc0: mmc@01c0f000 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index 916ee8bb826f..3decefb3c37a 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -54,6 +54,10 @@ model = "Olimex A13-Olinuxino Micro"; compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13"; + aliases { + serial0 = &uart1; + }; + soc@01c00000 { mmc0: mmc@01c0f000 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index e31d291d14cb..b421f7fa197b 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -55,6 +55,10 @@ model = "Olimex A13-Olinuxino"; compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13"; + aliases { + serial0 = &uart1; + }; + soc@01c00000 { mmc0: mmc@01c0f000 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 2448d7f38d6b..c556688f8b8b 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -16,11 +16,6 @@ / { interrupt-parent = <&intc>; - aliases { - serial0 = &uart1; - serial1 = &uart3; - }; - cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index f47156b6572b..1e7e7bcf8307 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -53,12 +53,6 @@ interrupt-parent = <&gic>; aliases { - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; - serial5 = &uart5; ethernet0 = &gmac; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 1cf1214cc068..bd7b15add697 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -55,6 +55,12 @@ model = "LeMaker Banana Pi"; compatible = "lemaker,bananapi", "allwinner,sun7i-a20"; + aliases { + serial0 = &uart0; + serial1 = &uart3; + serial2 = &uart7; + }; + soc@01c00000 { spi0: spi@01c05000 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts index 0e4bfa3b2b85..0bcefcbbb756 100644 --- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -19,6 +19,14 @@ model = "Merrii A20 Hummingbird"; compatible = "merrii,a20-hummingbird", "allwinner,sun7i-a20"; + aliases { + serial0 = &uart0; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + }; + soc@01c00000 { mmc0: mmc@01c0f000 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 9d669cdf031d..66cc77707198 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -20,6 +20,9 @@ compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20"; aliases { + serial0 = &uart0; + serial1 = &uart6; + serial2 = &uart7; spi0 = &spi1; spi1 = &spi2; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index e21ce5992d56..89749ce34a84 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -54,14 +54,6 @@ aliases { ethernet0 = &gmac; - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; - serial5 = &uart5; - serial6 = &uart6; - serial7 = &uart7; }; chosen { diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 0746cd1024d7..86584fcf5e32 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -52,15 +52,6 @@ / { interrupt-parent = <&gic>; - aliases { - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; - serial5 = &r_uart; - }; - cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 506948f582ee..11ec71072e81 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -54,6 +54,11 @@ model = "Merrii A80 Optimus Board"; compatible = "merrii,a80-optimus", "allwinner,sun9i-a80"; + aliases { + serial0 = &uart0; + serial1 = &uart4; + }; + chosen { bootargs = "earlyprintk console=ttyS0,115200"; }; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 494714f67b57..9ef4438206a9 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -52,16 +52,6 @@ / { interrupt-parent = <&gic>; - aliases { - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; - serial5 = &uart5; - serial6 = &r_uart; - }; - cpus { #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From dcad68876c21bac709b01eda24e39d4410dc36a8 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 28 Jan 2015 12:55:45 +0100 Subject: ARM: mvebu: don't set the PL310 in I/O coherency mode when I/O coherency is disabled Since commit f2c3c67f00 (merge commit that adds commit "ARM: mvebu: completely disable hardware I/O coherency"), we disable I/O coherency on Armada EBU platforms. However, we continue to initialize the coherency fabric, because this coherency fabric is needed on Armada XP for inter-CPU coherency. Unfortunately, due to this, we also continued to execute the coherency fabric initialization code for Armada 375/38x, which switched the PL310 into I/O coherent mode. This has the effect of disabling the outer cache sync operation: this is needed when I/O coherency is enabled to work around a PCIe/L2 deadlock. But obviously, when I/O coherency is disabled, having the outer cache sync operation is crucial. Therefore, this commit fixes the armada_375_380_coherency_init() so that the PL310 is switched to I/O coherent mode only if I/O coherency is enabled. Without this fix, all devices using DMA are broken on Armada 375/38x. Signed-off-by: Thomas Petazzoni Acked-by: Gregory CLEMENT Tested-by: Gregory CLEMENT Signed-off-by: Andrew Lunn Cc: # v3.8+ --- arch/arm/mach-mvebu/coherency.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c index caa21e9b8cd9..ccef8806bb58 100644 --- a/arch/arm/mach-mvebu/coherency.c +++ b/arch/arm/mach-mvebu/coherency.c @@ -189,6 +189,13 @@ static void __init armada_375_380_coherency_init(struct device_node *np) coherency_cpu_base = of_iomap(np, 0); arch_ioremap_caller = armada_pcie_wa_ioremap_caller; + /* + * We should switch the PL310 to I/O coherency mode only if + * I/O coherency is actually enabled. + */ + if (!coherency_available()) + return; + /* * Add the PL310 property "arm,io-coherent". This makes sure the * outer sync operation is not used, which allows to -- cgit v1.2.3 From 974b072f71e350bf2c5fb9cfd5c6c9d341a53300 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 28 Jan 2015 21:46:45 +0900 Subject: ARM: shmobile: r8a73a4: Instantiate GIC from C board code in legacy builds As of commit 9a1091ef0017c40a ("irqchip: gic: Support hierarchy irq domain."), the APE6EVM legacy board support is known to be broken. The IRQ numbers of the GIC are now virtual, and no longer match the hardcoded hardware IRQ numbers in the legacy platform board code. To fix this issue specific to non-muliplatform r8a73a4 and APE6EVM: 1) Instantiate the GIC from platform board code and also 2) Skip over the DT arch timer as well as 3) Force delay setup based on DT CPU frequency With these 3 fixes in place interrupts on APE6EVM are now unbroken. Partially based on legacy GIC fix by Geert Uytterhoeven, thanks to him for the initial work. Signed-off-by: Magnus Damm Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-ape6evm.c | 20 ++++++++++++++++++++ arch/arm/mach-shmobile/timer.c | 7 +++++++ 2 files changed, 27 insertions(+) diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c index b222f68d55b7..2cca5ef86ba0 100644 --- a/arch/arm/mach-shmobile/board-ape6evm.c +++ b/arch/arm/mach-shmobile/board-ape6evm.c @@ -22,6 +22,8 @@ #include #include #include +#include +#include #include #include #include @@ -277,6 +279,22 @@ static void __init ape6evm_add_standard_devices(void) sizeof(ape6evm_leds_pdata)); } +static void __init ape6evm_legacy_init_time(void) +{ + /* Do not invoke DT-based timers via clocksource_of_init() */ +} + +static void __init ape6evm_legacy_init_irq(void) +{ + void __iomem *gic_dist_base = ioremap_nocache(0xf1001000, 0x1000); + void __iomem *gic_cpu_base = ioremap_nocache(0xf1002000, 0x1000); + + gic_init(0, 29, gic_dist_base, gic_cpu_base); + + /* Do not invoke DT-based interrupt code via irqchip_init() */ +} + + static const char *ape6evm_boards_compat_dt[] __initdata = { "renesas,ape6evm", NULL, @@ -284,7 +302,9 @@ static const char *ape6evm_boards_compat_dt[] __initdata = { DT_MACHINE_START(APE6EVM_DT, "ape6evm") .init_early = shmobile_init_delay, + .init_irq = ape6evm_legacy_init_irq, .init_machine = ape6evm_add_standard_devices, .init_late = shmobile_init_late, .dt_compat = ape6evm_boards_compat_dt, + .init_time = ape6evm_legacy_init_time, MACHINE_END diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index 32ee335d2632..44d32a84b001 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -75,6 +75,13 @@ void __init shmobile_init_delay(void) if (!max_freq) return; +#ifdef CONFIG_ARCH_SHMOBILE_LEGACY + /* Non-multiplatform r8a73a4 SoC cannot use arch timer due + * to GIC being initialized from C and arch timer via DT */ + if (of_machine_is_compatible("renesas,r8a73a4")) + has_arch_timer = false; +#endif + if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) { if (is_a7_a8_a9) shmobile_setup_delay_hz(max_freq, 1, 3); -- cgit v1.2.3 From 77cf5166f21c3b73b04571311dc89a327424f594 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 29 Jan 2015 16:25:32 +0900 Subject: ARM: shmobile: r8a7790: Instantiate GIC from C board code in legacy builds As of commit 9a1091ef0017c40a ("irqchip: gic: Support hierarchy irq domain."), the Lager legacy board support is known to be broken. The IRQ numbers of the GIC are now virtual, and no longer match the hardcoded hardware IRQ numbers in the legacy platform board code. To fix this issue specific to non-multiplatform r8a7790 and Lager: 1) Instantiate the GIC from platform board code and also 2) Skip over the DT arch timer as well as 3) Force delay setup based on DT CPU frequency With these 3 fixes in place interrupts on Lager are now unbroken. Partially based on legacy GIC fix by Geert Uytterhoeven, thanks to him for the initial work. Signed-off-by: Magnus Damm Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-lager.c | 13 +++++++++++++ arch/arm/mach-shmobile/setup-rcar-gen2.c | 2 ++ arch/arm/mach-shmobile/timer.c | 5 +++++ 3 files changed, 20 insertions(+) diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index 571327b1c942..3f513270fc60 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -25,6 +25,8 @@ #include #include #include +#include +#include #include #include #include @@ -873,6 +875,16 @@ static void __init lager_init(void) lager_ksz8041_fixup); } +static void __init lager_legacy_init_irq(void) +{ + void __iomem *gic_dist_base = ioremap_nocache(0xf1001000, 0x1000); + void __iomem *gic_cpu_base = ioremap_nocache(0xf1002000, 0x1000); + + gic_init(0, 29, gic_dist_base, gic_cpu_base); + + /* Do not invoke DT-based interrupt code via irqchip_init() */ +} + static const char * const lager_boards_compat_dt[] __initconst = { "renesas,lager", NULL, @@ -881,6 +893,7 @@ static const char * const lager_boards_compat_dt[] __initconst = { DT_MACHINE_START(LAGER_DT, "lager") .smp = smp_ops(r8a7790_smp_ops), .init_early = shmobile_init_delay, + .init_irq = lager_legacy_init_irq, .init_time = rcar_gen2_timer_init, .init_machine = lager_init, .init_late = shmobile_init_late, diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index 7ed92790d13f..101b3e430a0d 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -137,7 +137,9 @@ void __init rcar_gen2_timer_init(void) #ifdef CONFIG_COMMON_CLK rcar_gen2_clocks_init(mode); #endif +#ifdef CONFIG_ARCH_SHMOBILE_MULTI clocksource_of_init(); +#endif } struct memory_reserve_config { diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index 44d32a84b001..88f067bcec94 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -80,6 +80,11 @@ void __init shmobile_init_delay(void) * to GIC being initialized from C and arch timer via DT */ if (of_machine_is_compatible("renesas,r8a73a4")) has_arch_timer = false; + + /* Non-multiplatform r8a7790 SoC cannot use arch timer due + * to GIC being initialized from C and arch timer via DT */ + if (of_machine_is_compatible("renesas,r8a7790")) + has_arch_timer = false; #endif if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) { -- cgit v1.2.3 From eab8d6530cc00744087bb5566e350cf37fcdfc7e Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 23 Jan 2015 16:21:49 +0200 Subject: arm: dma-mapping: Set DMA IOMMU ops in arm_iommu_attach_device() Commit 4bb25789ed28228a ("arm: dma-mapping: plumb our iommu mapping ops into arch_setup_dma_ops") moved the setting of the DMA operations from arm_iommu_attach_device() to arch_setup_dma_ops() where the DMA operations to be used are selected based on whether the device is connected to an IOMMU. However, the IOMMU detection scheme requires the IOMMU driver to be ported to the new IOMMU of_xlate API. As no driver has been ported yet, this effectively breaks all IOMMU ARM users that depend on the IOMMU being handled transparently by the DMA mapping API. Fix this by restoring the setting of DMA IOMMU ops in arm_iommu_attach_device() and splitting the rest of the function into a new internal __arm_iommu_attach_device() function, called by arch_setup_dma_ops(). Signed-off-by: Laurent Pinchart Acked-by: Will Deacon Tested-by: Heiko Stuebner Signed-off-by: Olof Johansson --- arch/arm/mm/dma-mapping.c | 53 +++++++++++++++++++++++++++++++++-------------- 1 file changed, 38 insertions(+), 15 deletions(-) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 7864797609b3..a673c7f7e208 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1940,13 +1940,32 @@ void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping) } EXPORT_SYMBOL_GPL(arm_iommu_release_mapping); +static int __arm_iommu_attach_device(struct device *dev, + struct dma_iommu_mapping *mapping) +{ + int err; + + err = iommu_attach_device(mapping->domain, dev); + if (err) + return err; + + kref_get(&mapping->kref); + dev->archdata.mapping = mapping; + + pr_debug("Attached IOMMU controller to %s device.\n", dev_name(dev)); + return 0; +} + /** * arm_iommu_attach_device * @dev: valid struct device pointer * @mapping: io address space mapping structure (returned from * arm_iommu_create_mapping) * - * Attaches specified io address space mapping to the provided device, + * Attaches specified io address space mapping to the provided device. + * This replaces the dma operations (dma_map_ops pointer) with the + * IOMMU aware version. + * * More than one client might be attached to the same io address space * mapping. */ @@ -1955,25 +1974,16 @@ int arm_iommu_attach_device(struct device *dev, { int err; - err = iommu_attach_device(mapping->domain, dev); + err = __arm_iommu_attach_device(dev, mapping); if (err) return err; - kref_get(&mapping->kref); - dev->archdata.mapping = mapping; - - pr_debug("Attached IOMMU controller to %s device.\n", dev_name(dev)); + set_dma_ops(dev, &iommu_ops); return 0; } EXPORT_SYMBOL_GPL(arm_iommu_attach_device); -/** - * arm_iommu_detach_device - * @dev: valid struct device pointer - * - * Detaches the provided device from a previously attached map. - */ -void arm_iommu_detach_device(struct device *dev) +static void __arm_iommu_detach_device(struct device *dev) { struct dma_iommu_mapping *mapping; @@ -1989,6 +1999,19 @@ void arm_iommu_detach_device(struct device *dev) pr_debug("Detached IOMMU controller from %s device.\n", dev_name(dev)); } + +/** + * arm_iommu_detach_device + * @dev: valid struct device pointer + * + * Detaches the provided device from a previously attached map. + * This voids the dma operations (dma_map_ops pointer) + */ +void arm_iommu_detach_device(struct device *dev) +{ + __arm_iommu_detach_device(dev); + set_dma_ops(dev, NULL); +} EXPORT_SYMBOL_GPL(arm_iommu_detach_device); static struct dma_map_ops *arm_get_iommu_dma_map_ops(bool coherent) @@ -2011,7 +2034,7 @@ static bool arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size, return false; } - if (arm_iommu_attach_device(dev, mapping)) { + if (__arm_iommu_attach_device(dev, mapping)) { pr_warn("Failed to attached device %s to IOMMU_mapping\n", dev_name(dev)); arm_iommu_release_mapping(mapping); @@ -2025,7 +2048,7 @@ static void arm_teardown_iommu_dma_ops(struct device *dev) { struct dma_iommu_mapping *mapping = dev->archdata.mapping; - arm_iommu_detach_device(dev); + __arm_iommu_detach_device(dev); arm_iommu_release_mapping(mapping); } -- cgit v1.2.3