From ce87685128f3e0fced2aca9f73fc8cc67704ae11 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Wed, 1 Oct 2014 16:07:04 -0700 Subject: target: Add documentation on the target userspace pass-through driver Describes the driver and its interface to make it possible for user programs to back a LIO-exported LUN. Thanks to Richard W. M. Jones for review, and supplementing this doc with the first two paragraphs. Signed-off-by: Andy Grover Signed-off-by: Nicholas Bellinger --- Documentation/target/tcmu-design.txt | 378 +++++++++++++++++++++++++++++++++++ 1 file changed, 378 insertions(+) create mode 100644 Documentation/target/tcmu-design.txt (limited to 'Documentation') diff --git a/Documentation/target/tcmu-design.txt b/Documentation/target/tcmu-design.txt new file mode 100644 index 000000000000..5518465290bf --- /dev/null +++ b/Documentation/target/tcmu-design.txt @@ -0,0 +1,378 @@ +Contents: + +1) TCM Userspace Design + a) Background + b) Benefits + c) Design constraints + d) Implementation overview + i. Mailbox + ii. Command ring + iii. Data Area + e) Device discovery + f) Device events + g) Other contingencies +2) Writing a user pass-through handler + a) Discovering and configuring TCMU uio devices + b) Waiting for events on the device(s) + c) Managing the command ring +3) Command filtering and pass_level +4) A final note + + +TCM Userspace Design +-------------------- + +TCM is another name for LIO, an in-kernel iSCSI target (server). +Existing TCM targets run in the kernel. TCMU (TCM in Userspace) +allows userspace programs to be written which act as iSCSI targets. +This document describes the design. + +The existing kernel provides modules for different SCSI transport +protocols. TCM also modularizes the data storage. There are existing +modules for file, block device, RAM or using another SCSI device as +storage. These are called "backstores" or "storage engines". These +built-in modules are implemented entirely as kernel code. + +Background: + +In addition to modularizing the transport protocol used for carrying +SCSI commands ("fabrics"), the Linux kernel target, LIO, also modularizes +the actual data storage as well. These are referred to as "backstores" +or "storage engines". The target comes with backstores that allow a +file, a block device, RAM, or another SCSI device to be used for the +local storage needed for the exported SCSI LUN. Like the rest of LIO, +these are implemented entirely as kernel code. + +These backstores cover the most common use cases, but not all. One new +use case that other non-kernel target solutions, such as tgt, are able +to support is using Gluster's GLFS or Ceph's RBD as a backstore. The +target then serves as a translator, allowing initiators to store data +in these non-traditional networked storage systems, while still only +using standard protocols themselves. + +If the target is a userspace process, supporting these is easy. tgt, +for example, needs only a small adapter module for each, because the +modules just use the available userspace libraries for RBD and GLFS. + +Adding support for these backstores in LIO is considerably more +difficult, because LIO is entirely kernel code. Instead of undertaking +the significant work to port the GLFS or RBD APIs and protocols to the +kernel, another approach is to create a userspace pass-through +backstore for LIO, "TCMU". + + +Benefits: + +In addition to allowing relatively easy support for RBD and GLFS, TCMU +will also allow easier development of new backstores. TCMU combines +with the LIO loopback fabric to become something similar to FUSE +(Filesystem in Userspace), but at the SCSI layer instead of the +filesystem layer. A SUSE, if you will. + +The disadvantage is there are more distinct components to configure, and +potentially to malfunction. This is unavoidable, but hopefully not +fatal if we're careful to keep things as simple as possible. + +Design constraints: + +- Good performance: high throughput, low latency +- Cleanly handle if userspace: + 1) never attaches + 2) hangs + 3) dies + 4) misbehaves +- Allow future flexibility in user & kernel implementations +- Be reasonably memory-efficient +- Simple to configure & run +- Simple to write a userspace backend + + +Implementation overview: + +The core of the TCMU interface is a memory region that is shared +between kernel and userspace. Within this region is: a control area +(mailbox); a lockless producer/consumer circular buffer for commands +to be passed up, and status returned; and an in/out data buffer area. + +TCMU uses the pre-existing UIO subsystem. UIO allows device driver +development in userspace, and this is conceptually very close to the +TCMU use case, except instead of a physical device, TCMU implements a +memory-mapped layout designed for SCSI commands. Using UIO also +benefits TCMU by handling device introspection (e.g. a way for +userspace to determine how large the shared region is) and signaling +mechanisms in both directions. + +There are no embedded pointers in the memory region. Everything is +expressed as an offset from the region's starting address. This allows +the ring to still work if the user process dies and is restarted with +the region mapped at a different virtual address. + +See target_core_user.h for the struct definitions. + +The Mailbox: + +The mailbox is always at the start of the shared memory region, and +contains a version, details about the starting offset and size of the +command ring, and head and tail pointers to be used by the kernel and +userspace (respectively) to put commands on the ring, and indicate +when the commands are completed. + +version - 1 (userspace should abort if otherwise) +flags - none yet defined. +cmdr_off - The offset of the start of the command ring from the start +of the memory region, to account for the mailbox size. +cmdr_size - The size of the command ring. This does *not* need to be a +power of two. +cmd_head - Modified by the kernel to indicate when a command has been +placed on the ring. +cmd_tail - Modified by userspace to indicate when it has completed +processing of a command. + +The Command Ring: + +Commands are placed on the ring by the kernel incrementing +mailbox.cmd_head by the size of the command, modulo cmdr_size, and +then signaling userspace via uio_event_notify(). Once the command is +completed, userspace updates mailbox.cmd_tail in the same way and +signals the kernel via a 4-byte write(). When cmd_head equals +cmd_tail, the ring is empty -- no commands are currently waiting to be +processed by userspace. + +TCMU commands start with a common header containing "len_op", a 32-bit +value that stores the length, as well as the opcode in the lowest +unused bits. Currently only two opcodes are defined, TCMU_OP_PAD and +TCMU_OP_CMD. When userspace encounters a command with PAD opcode, it +should skip ahead by the bytes in "length". (The kernel inserts PAD +entries to ensure each CMD entry fits contigously into the circular +buffer.) + +When userspace handles a CMD, it finds the SCSI CDB (Command Data +Block) via tcmu_cmd_entry.req.cdb_off. This is an offset from the +start of the overall shared memory region, not the entry. The data +in/out buffers are accessible via tht req.iov[] array. Note that +each iov.iov_base is also an offset from the start of the region. + +TCMU currently does not support BIDI operations. + +When completing a command, userspace sets rsp.scsi_status, and +rsp.sense_buffer if necessary. Userspace then increments +mailbox.cmd_tail by entry.hdr.length (mod cmdr_size) and signals the +kernel via the UIO method, a 4-byte write to the file descriptor. + +The Data Area: + +This is shared-memory space after the command ring. The organization +of this area is not defined in the TCMU interface, and userspace +should access only the parts referenced by pending iovs. + + +Device Discovery: + +Other devices may be using UIO besides TCMU. Unrelated user processes +may also be handling different sets of TCMU devices. TCMU userspace +processes must find their devices by scanning sysfs +class/uio/uio*/name. For TCMU devices, these names will be of the +format: + +tcm-user//// + +where "tcm-user" is common for all TCMU-backed UIO devices. +and allow userspace to find the device's path in the +kernel target's configfs tree. Assuming the usual mount point, it is +found at: + +/sys/kernel/config/target/core/user_/ + +This location contains attributes such as "hw_block_size", that +userspace needs to know for correct operation. + + will be a userspace-process-unique string to identify the +TCMU device as expecting to be backed by a certain handler, and +will be an additional handler-specific string for the user process to +configure the device, if needed. The name cannot contain ':', due to +LIO limitations. + +For all devices so discovered, the user handler opens /dev/uioX and +calls mmap(): + +mmap(NULL, size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0) + +where size must be equal to the value read from +/sys/class/uio/uioX/maps/map0/size. + + +Device Events: + +If a new device is added or removed, a notification will be broadcast +over netlink, using a generic netlink family name of "TCM-USER" and a +multicast group named "config". This will include the UIO name as +described in the previous section, as well as the UIO minor +number. This should allow userspace to identify both the UIO device and +the LIO device, so that after determining the device is supported +(based on subtype) it can take the appropriate action. + + +Other contingencies: + +Userspace handler process never attaches: + +- TCMU will post commands, and then abort them after a timeout period + (30 seconds.) + +Userspace handler process is killed: + +- It is still possible to restart and re-connect to TCMU + devices. Command ring is preserved. However, after the timeout period, + the kernel will abort pending tasks. + +Userspace handler process hangs: + +- The kernel will abort pending tasks after a timeout period. + +Userspace handler process is malicious: + +- The process can trivially break the handling of devices it controls, + but should not be able to access kernel memory outside its shared + memory areas. + + +Writing a user pass-through handler (with example code) +------------------------------------------------------- + +A user process handing a TCMU device must support the following: + +a) Discovering and configuring TCMU uio devices +b) Waiting for events on the device(s) +c) Managing the command ring: Parsing operations and commands, + performing work as needed, setting response fields (scsi_status and + possibly sense_buffer), updating cmd_tail, and notifying the kernel + that work has been finished + +First, consider instead writing a plugin for tcmu-runner. tcmu-runner +implements all of this, and provides a higher-level API for plugin +authors. + +TCMU is designed so that multiple unrelated processes can manage TCMU +devices separately. All handlers should make sure to only open their +devices, based opon a known subtype string. + +a) Discovering and configuring TCMU UIO devices: + +(error checking omitted for brevity) + +int fd, dev_fd; +char buf[256]; +unsigned long long map_len; +void *map; + +fd = open("/sys/class/uio/uio0/name", O_RDONLY); +ret = read(fd, buf, sizeof(buf)); +close(fd); +buf[ret-1] = '\0'; /* null-terminate and chop off the \n */ + +/* we only want uio devices whose name is a format we expect */ +if (strncmp(buf, "tcm-user", 8)) + exit(-1); + +/* Further checking for subtype also needed here */ + +fd = open(/sys/class/uio/%s/maps/map0/size, O_RDONLY); +ret = read(fd, buf, sizeof(buf)); +close(fd); +str_buf[ret-1] = '\0'; /* null-terminate and chop off the \n */ + +map_len = strtoull(buf, NULL, 0); + +dev_fd = open("/dev/uio0", O_RDWR); +map = mmap(NULL, map_len, PROT_READ|PROT_WRITE, MAP_SHARED, dev_fd, 0); + + +b) Waiting for events on the device(s) + +while (1) { + char buf[4]; + + int ret = read(dev_fd, buf, 4); /* will block */ + + handle_device_events(dev_fd, map); +} + + +c) Managing the command ring + +#include + +int handle_device_events(int fd, void *map) +{ + struct tcmu_mailbox *mb = map; + struct tcmu_cmd_entry *ent = (void *) mb + mb->cmdr_off + mb->cmd_tail; + int did_some_work = 0; + + /* Process events from cmd ring until we catch up with cmd_head */ + while (ent != (void *)mb + mb->cmdr_off + mb->cmd_head) { + + if (tcmu_hdr_get_op(&ent->hdr) == TCMU_OP_CMD) { + uint8_t *cdb = (void *)mb + ent->req.cdb_off; + bool success = true; + + /* Handle command here. */ + printf("SCSI opcode: 0x%x\n", cdb[0]); + + /* Set response fields */ + if (success) + ent->rsp.scsi_status = SCSI_NO_SENSE; + else { + /* Also fill in rsp->sense_buffer here */ + ent->rsp.scsi_status = SCSI_CHECK_CONDITION; + } + } + else { + /* Do nothing for PAD entries */ + } + + /* update cmd_tail */ + mb->cmd_tail = (mb->cmd_tail + tcmu_hdr_get_len(&ent->hdr)) % mb->cmdr_size; + ent = (void *) mb + mb->cmdr_off + mb->cmd_tail; + did_some_work = 1; + } + + /* Notify the kernel that work has been finished */ + if (did_some_work) { + uint32_t buf = 0; + + write(fd, &buf, 4); + } + + return 0; +} + + +Command filtering and pass_level +-------------------------------- + +TCMU supports a "pass_level" option with valid values of 0 or 1. When +the value is 0 (the default), nearly all SCSI commands received for +the device are passed through to the handler. This allows maximum +flexibility but increases the amount of code required by the handler, +to support all mandatory SCSI commands. If pass_level is set to 1, +then only IO-related commands are presented, and the rest are handled +by LIO's in-kernel command emulation. The commands presented at level +1 include all versions of: + +READ +WRITE +WRITE_VERIFY +XDWRITEREAD +WRITE_SAME +COMPARE_AND_WRITE +SYNCHRONIZE_CACHE +UNMAP + + +A final note +------------ + +Please be careful to return codes as defined by the SCSI +specifications. These are different than some values defined in the +scsi/scsi.h include file. For example, CHECK CONDITION's status code +is 2, not 1. -- cgit v1.2.3