From 56fd3dc793e9f53acf36411f5c9814997e587b3e Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 2 Jul 2015 17:06:19 +0300 Subject: ARM: dts: am43xx-epos-evm: Add gpio-hog for configuring the display/audio mux GPIO2_1 is used as a mux switch between LCD and HDMI displays. This mux affects audio routing as well since in LCD mode HDMI audio is not possible and when HDMI is selected analog audio is not working. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am43x-epos-evm.dts | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) (limited to 'arch/arm/boot/dts/am43x-epos-evm.dts') diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 795d68af6df9..77919c570fe1 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -35,17 +35,6 @@ compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; label = "lcd"; - pinctrl-names = "default"; - pinctrl-0 = <&lcd_pins>; - - /* - * SelLCDorHDMI, LOW to select HDMI. This is not really the - * panel's enable GPIO, but we don't have HDMI driver support nor - * support to switch between two displays, so using this gpio as - * panel's enable should be safe. - */ - enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; - panel-timing { clock-frequency = <33000000>; hactive = <800>; @@ -278,7 +267,7 @@ >; }; - lcd_pins: lcd_pins { + display_mux_pins: display_mux_pins { pinctrl-single,pins = < /* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */ 0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7) @@ -458,7 +447,21 @@ }; &gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&display_mux_pins>; status = "okay"; + + p1 { + /* + * SelLCDorHDMI selects between display and audio paths: + * Low: HDMI display with audio via HDMI + * High: LCD display with analog audio via aic3111 codec + */ + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "SelLCDorHDMI"; + }; }; &gpio3 { -- cgit v1.2.3