From b174e79ef518622a29ddf26923efaa5b90e2b973 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Date: Thu, 5 Feb 2015 00:29:06 +0900 Subject: ARM: dts: represent bridge and panel connection for exynos5250-snow Define videoports and use endpoints to describe the connection between the encoder, bridge and the panel, instead of using phandles. Signed-off-by: Ajay Kumar Acked-by: Inki Dae Tested-by: Rahul Sharma Tested-by: Javier Martinez Canillas Tested-by: Gustavo Padovan Tested-by: Sjoerd Simons Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-snow.dts | 30 ++++++++++++++++++++++++++++-- 1 file changed, 28 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot/dts/exynos5250-snow.dts') diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 909edc3448d3..5be966df7603 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -183,7 +183,20 @@ powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>; edid-emulation = <5>; - panel = <&panel>; + + ports { + port@0 { + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + port@1 { + bridge_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; }; }; @@ -228,6 +241,12 @@ compatible = "auo,b116xw03"; power-supply = <&fet6>; backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; }; mmc3_pwrseq: mmc3_pwrseq { @@ -250,7 +269,14 @@ samsung,link-rate = <0x0a>; samsung,lane-count = <2>; samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>; - bridge = <&ptn3460>; + + ports { + port@0 { + dp_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; }; &ehci { -- cgit v1.2.3