From a5fcccbc6ef8a6a0e015f3b72a2d8fcac8210425 Mon Sep 17 00:00:00 2001 From: Frank Li Date: Fri, 10 Jul 2015 02:09:45 +0800 Subject: ARM: dts: imx: add imx6ul and imx6ul evk board support Add new SOC i.MX6UL dtb file support, including evk board support i.MX6 Ultralite processor include one ARM cortext-A7 core. Offer high perfomance and lowest power consumption. Main included: - 4 MMC/SD/SDIO - 2 USB 2.0 OTG - 3 I2S/SAI/AC97 - 4 eCSPI - 4 I2C - 2 ENET - 2 CAN - 3 wdog - ASRC - 8 uart - LCDIF - PXP Signed-off-by: Anson Huang Signed-off-by: Fugang Duan Signed-off-by: Fancy Fang Signed-off-by: Frank Li Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6ul.dtsi | 607 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 607 insertions(+) create mode 100644 arch/arm/boot/dts/imx6ul.dtsi (limited to 'arch/arm/boot/dts/imx6ul.dtsi') diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi new file mode 100644 index 000000000000..dc0f5b400cef --- /dev/null +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -0,0 +1,607 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include "imx6ul-pinfunc.h" +#include "skeleton.dtsi" + +/ { + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + serial6 = &uart7; + serial7 = &uart8; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + spi3 = &ecspi4; + usbphy0 = &usbphy1; + usbphy1 = &usbphy2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + clock-latency = <61036>; /* two CLK32 periods */ + operating-points = < + /* kHz uV */ + 528000 1250000 + 396000 1150000 + 198000 1150000 + >; + fsl,soc-operating-points = < + /* KHz uV */ + 528000 1250000 + 396000 1150000 + 198000 1150000 + >; + clocks = <&clks IMX6UL_CLK_ARM>, + <&clks IMX6UL_CLK_PLL2_BUS>, + <&clks IMX6UL_CLK_PLL2_PFD2>, + <&clks IMX6UL_CA7_SECONDARY_SEL>, + <&clks IMX6UL_CLK_STEP>, + <&clks IMX6UL_CLK_PLL1_SW>, + <&clks IMX6UL_CLK_PLL1_SYS>, + <&clks IMX6UL_PLL1_BYPASS>, + <&clks IMX6UL_CLK_PLL1>, + <&clks IMX6UL_PLL1_BYPASS_SRC>, + <&clks IMX6UL_CLK_OSC>; + clock-names = "arm", "pll2_bus", "pll2_pfd2_396m", + "secondary_sel", "step", "pll1_sw", + "pll1_sys", "pll1_bypass", "pll1", + "pll1_bypass_src", "osc"; + arm-supply = <®_arm>; + soc-supply = <®_soc>; + }; + }; + + intc: interrupt-controller@00a01000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a02000 0x1000>, + <0x00a04000 0x2000>, + <0x00a06000 0x2000>; + }; + + ckil: clock-cli { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; + + osc: clock-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; + + ipp_di0: clock-di0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di0"; + }; + + ipp_di1: clock-di1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di1"; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = ; + status = "disabled"; + }; + + aips1: aips-bus@02000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x100000>; + ranges; + + spba-bus@02000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x40000>; + ranges; + + ecspi1: ecspi@02008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02008000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_ECSPI1>, + <&clks IMX6UL_CLK_ECSPI1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: ecspi@0200c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x0200c000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_ECSPI2>, + <&clks IMX6UL_CLK_ECSPI2>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: ecspi@02010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02010000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_ECSPI3>, + <&clks IMX6UL_CLK_ECSPI3>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi4: ecspi@02014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02014000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_ECSPI4>, + <&clks IMX6UL_CLK_ECSPI4>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart7: serial@02018000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x02018000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART7_IPG>, + <&clks IMX6UL_CLK_UART7_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@02020000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x02020000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART1_IPG>, + <&clks IMX6UL_CLK_UART1_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart8: serial@02024000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x02024000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART8_IPG>, + <&clks IMX6UL_CLK_UART8_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + + gpt1: gpt@02098000 { + compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; + reg = <0x02098000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_GPT1_BUS>, + <&clks IMX6UL_CLK_GPT1_SERIAL>; + clock-names = "ipg", "per"; + }; + + gpio1: gpio@0209c000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x0209c000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@020a0000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x020a0000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@020a4000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x020a4000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@020a8000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x020a8000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@020ac000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x020ac000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wdog1: wdog@020bc000 { + compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; + reg = <0x020bc000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_WDOG1>; + }; + + wdog2: wdog@020c0000 { + compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; + reg = <0x020c0000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_WDOG2>; + status = "disabled"; + }; + + clks: ccm@020c4000 { + compatible = "fsl,imx6ul-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = , + ; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + }; + + anatop: anatop@020c8000 { + compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop", + "syscon", "simple-bus"; + reg = <0x020c8000 0x1000>; + interrupts = , + , + ; + + reg_3p0: regulator-3p0@120 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2625000>; + regulator-max-microvolt = <3400000>; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; + }; + + reg_arm: regulator-vddcore@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "cpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <0>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <24>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_soc: regulator-vddsoc@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddsoc"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <18>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <28>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + }; + + usbphy1: usbphy@020c9000 { + compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_USBPHY1>; + phy-3p0-supply = <®_3p0>; + fsl,anatop = <&anatop>; + }; + + usbphy2: usbphy@020ca000 { + compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; + reg = <0x020ca000 0x1000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_USBPHY2>; + phy-3p0-supply = <®_3p0>; + fsl,anatop = <&anatop>; + }; + + epit1: epit@020d0000 { + reg = <0x020d0000 0x4000>; + interrupts = ; + }; + + epit2: epit@020d4000 { + reg = <0x020d4000 0x4000>; + interrupts = ; + }; + + src: src@020d8000 { + compatible = "fsl,imx6ul-src", "fsl,imx51-src"; + reg = <0x020d8000 0x4000>; + interrupts = , + ; + #reset-cells = <1>; + }; + + gpc: gpc@020dc000 { + compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupts = ; + }; + + iomuxc: iomuxc@020e0000 { + compatible = "fsl,imx6ul-iomuxc"; + reg = <0x020e0000 0x4000>; + }; + + gpr: iomuxc-gpr@020e4000 { + compatible = "fsl,imx6ul-iomuxc-gpr", "syscon"; + reg = <0x020e4000 0x4000>; + }; + + gpt2: gpt@020e8000 { + compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; + reg = <0x020e8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + }; + + pwm5: pwm@020f0000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x020f0000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm6: pwm@020f4000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x020f4000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm7: pwm@020f8000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x020f8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm8: pwm@020fc000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x020fc000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + }; + + aips2: aips-bus@02100000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02100000 0x100000>; + ranges; + + usdhc1: usdhc@02190000 { + compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02190000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_USDHC1>, + <&clks IMX6UL_CLK_USDHC1>, + <&clks IMX6UL_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: usdhc@02194000 { + compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02194000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_USDHC2>, + <&clks IMX6UL_CLK_USDHC2>, + <&clks IMX6UL_CLK_USDHC2>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + i2c1: i2c@021a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; + reg = <0x021a0000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_I2C1>; + status = "disabled"; + }; + + i2c2: i2c@021a4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; + reg = <0x021a4000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_I2C2>; + status = "disabled"; + }; + + i2c3: i2c@021a8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; + reg = <0x021a8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_I2C3>; + status = "disabled"; + }; + + uart2: serial@021e8000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x021e8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART2_IPG>, + <&clks IMX6UL_CLK_UART2_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart3: serial@021ec000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x021ec000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART3_IPG>, + <&clks IMX6UL_CLK_UART3_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart4: serial@021f0000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x021f0000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART4_IPG>, + <&clks IMX6UL_CLK_UART4_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart5: serial@021f4000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x021f4000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART5_IPG>, + <&clks IMX6UL_CLK_UART5_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c4: i2c@021f8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; + reg = <0x021f8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_I2C4>; + status = "disabled"; + }; + + uart6: serial@021fc000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x021fc000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART6_IPG>, + <&clks IMX6UL_CLK_UART6_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + }; +}; -- cgit v1.2.3