From 46713ddc870f77064b5a05f522fc7e1fdb635fc7 Mon Sep 17 00:00:00 2001 From: Sanchayan Maity Date: Fri, 2 Jun 2017 12:22:13 +0530 Subject: ARM: dts: imx7-colibri-aster: Add support for Aster with Colibri iMX7 Add support for Aster Carrier Board with Colibri iMX7. Signed-off-by: Sanchayan Maity Signed-off-by: Stefan Agner --- arch/arm/boot/dts/imx7-colibri-aster.dtsi | 278 ++++++++++++++++++++++++++++++ 1 file changed, 278 insertions(+) create mode 100644 arch/arm/boot/dts/imx7-colibri-aster.dtsi (limited to 'arch/arm/boot/dts/imx7-colibri-aster.dtsi') diff --git a/arch/arm/boot/dts/imx7-colibri-aster.dtsi b/arch/arm/boot/dts/imx7-colibri-aster.dtsi new file mode 100644 index 000000000000..d99208746b70 --- /dev/null +++ b/arch/arm/boot/dts/imx7-colibri-aster.dtsi @@ -0,0 +1,278 @@ +/* + * Copyright 2017 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/ { + chosen { + bootargs = "console=ttymxc0,115200"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + + power { + label = "Wake-Up"; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + linux,code = ; + debounce-interval = <10>; + gpio-key,wakeup; + }; + }; + + extcon_usbc_det: usbc_det { + compatible = "linux,extcon-usb-gpio"; + debounce = <25>; + id-gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbc_det>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; +}; + +&bl { + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; +}; + +&adc1 { + status = "okay"; +}; + +&adc2 { + status = "okay"; +}; + +&epxp { + status = "okay"; +}; + +&ecspi3 { + fsl,spi-num-chipselects = <2>; + cs-gpios = < + &gpio4 11 GPIO_ACTIVE_HIGH + &gpio4 23 GPIO_ACTIVE_HIGH + >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_aster_spi_gpio>; + status = "okay"; + + spidev0: spidev@0 { + compatible = "toradex,evalspi"; + reg = <0>; + spi-max-frequency = <23000000>; + }; + + spidev1: spidev@1 { + compatible = "toradex,evalspi"; + reg = <1>; + spi-max-frequency = <23000000>; + }; +}; + +&fec1 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc: m41t0m6@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +&lcdif { + display = <&display0>; + status = "okay"; + + display0: lcd-display { + bits-per-pixel = <16>; + bus-width = <18>; + + display-timings { + native-mode = <&timing_vga>; + + /* Standard VGA timing */ + timing_vga: 640x480 { + clock-frequency = <25175000>; + hactive = <640>; + vactive = <480>; + hback-porch = <40>; + hfront-porch = <24>; + vback-porch = <32>; + vfront-porch = <11>; + hsync-len = <96>; + vsync-len = <2>; + + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <0>; + }; + + /* WVGA Timing, e.g. EDT ET070080DH6 */ + timing_wvga: 800x480 { + clock-frequency = <33260000>; + hactive = <800>; + vactive = <480>; + hback-porch = <216>; + hfront-porch = <40>; + vback-porch = <35>; + vfront-porch = <10>; + hsync-len = <128>; + vsync-len = <2>; + + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <0>; + }; + + /* Standard SVGA timing */ + timing_svga: 800x600 { + clock-frequency = <40000000>; + hactive = <800>; + vactive = <600>; + hback-porch = <88>; + hfront-porch = <40>; + vback-porch = <23>; + vfront-porch = <1>; + hsync-len = <128>; + vsync-len = <4>; + + de-active = <1>; + hsync-active = <1>; + vsync-active = <1>; + pixelclk-active = <0>; + }; + + /* Standard XGA timing */ + timing_xga: 1024x768 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <160>; + hfront-porch = <24>; + vback-porch = <29>; + vfront-porch = <3>; + hsync-len = <136>; + vsync-len = <6>; + + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbotg1 { + extcon = <&extcon_usbc_det>; + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; + +/* The define SD_1_8 allows to use the SD interface at a higher speed mode + * if the card supports it. For this the signaling voltage is switched from + * 3.3V to 1.8V under the usdhc1's drivers control. + * All pins supplied with NVCC_SD1 must be able to cope with this + * and must (MUST!!!) not be driven with a voltage higher than 1.8V or + * the interface will not work. + */ +/* #define SD_1_8 */ +&usdhc1 { +#ifdef SD_1_8 + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_cd_usdhc1>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_cd_usdhc1>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_LDO2>; +#else + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>; + no-1-8-v; +#endif + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + disable-wp; + enable-sdio-wakeup; + keep-power-in-suspend; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_1 &pinctrl_hog_2 &pinctrl_hog_3 &pinctrl_hog_4 &pinctrl_hog_5>; + + imx7d-aster { + pinctrl_aster_spi_gpio: spigpios { + fsl,pins = < + /* CS1 */ + MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x74 /* SODIMM 65 */ + >; + }; + }; +}; -- cgit v1.2.3