From a87027196803227dd9f4ee848f4aa2dbfe699c4c Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 20 Apr 2017 16:25:08 +0530 Subject: ARM: pxa: Use - instead of @ for DT OPP entries Compiling the DT file with W=1, DTC warns like follows: Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a unit name, but no reg property Fix this by replacing '@' with '-' as the OPP nodes will never have a "reg" property. Reported-by: Krzysztof Kozlowski Reported-by: Masahiro Yamada Suggested-by: Mark Rutland Signed-off-by: Viresh Kumar Acked-by: Rob Herring Signed-off-by: Robert Jarzmik --- arch/arm/boot/dts/pxa27x.dtsi | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'arch/arm/boot/dts/pxa27x.dtsi') diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index e0fab48ba6fa..5f1d6da02a4c 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -141,37 +141,37 @@ pxa270_opp_table: opp_table0 { compatible = "operating-points-v2"; - opp@104000000 { + opp-104000000 { opp-hz = /bits/ 64 <104000000>; opp-microvolt = <900000 900000 1705000>; clock-latency-ns = <20>; }; - opp@156000000 { + opp-156000000 { opp-hz = /bits/ 64 <156000000>; opp-microvolt = <1000000 1000000 1705000>; clock-latency-ns = <20>; }; - opp@208000000 { + opp-208000000 { opp-hz = /bits/ 64 <208000000>; opp-microvolt = <1180000 1180000 1705000>; clock-latency-ns = <20>; }; - opp@312000000 { + opp-312000000 { opp-hz = /bits/ 64 <312000000>; opp-microvolt = <1250000 1250000 1705000>; clock-latency-ns = <20>; }; - opp@416000000 { + opp-416000000 { opp-hz = /bits/ 64 <416000000>; opp-microvolt = <1350000 1350000 1705000>; clock-latency-ns = <20>; }; - opp@520000000 { + opp-520000000 { opp-hz = /bits/ 64 <520000000>; opp-microvolt = <1450000 1450000 1705000>; clock-latency-ns = <20>; }; - opp@624000000 { + opp-624000000 { opp-hz = /bits/ 64 <624000000>; opp-microvolt = <1550000 1550000 1705000>; clock-latency-ns = <20>; -- cgit v1.2.3