From e0ffbaabc46db508b8717f023c0ce03b980eefac Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Fri, 5 Sep 2014 15:13:54 -0700 Subject: x86: Split syscall_trace_enter into two phases This splits syscall_trace_enter into syscall_trace_enter_phase1 and syscall_trace_enter_phase2. Only phase 2 has full pt_regs, and only phase 2 is permitted to modify any of pt_regs except for orig_ax. The intent is that phase 1 can be called from the syscall fast path. In this implementation, phase1 can handle any combination of TIF_NOHZ (RCU context tracking), TIF_SECCOMP, and TIF_SYSCALL_AUDIT, unless seccomp requests a ptrace event, in which case phase2 is forced. In principle, this could yield a big speedup for TIF_NOHZ as well as for TIF_SECCOMP if syscall exit work were similarly split up. Signed-off-by: Andy Lutomirski Link: http://lkml.kernel.org/r/2df320a600020fda055fccf2b668145729dd0c04.1409954077.git.luto@amacapital.net Signed-off-by: H. Peter Anvin --- arch/x86/kernel/ptrace.c | 157 +++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 133 insertions(+), 24 deletions(-) (limited to 'arch/x86/kernel/ptrace.c') diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index bbf338a04a5d..29576c244699 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -1441,20 +1441,126 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, force_sig_info(SIGTRAP, &info, tsk); } +static void do_audit_syscall_entry(struct pt_regs *regs, u32 arch) +{ +#ifdef CONFIG_X86_64 + if (arch == AUDIT_ARCH_X86_64) { + audit_syscall_entry(arch, regs->orig_ax, regs->di, + regs->si, regs->dx, regs->r10); + } else +#endif + { + audit_syscall_entry(arch, regs->orig_ax, regs->bx, + regs->cx, regs->dx, regs->si); + } +} + /* - * We must return the syscall number to actually look up in the table. - * This can be -1L to skip running any syscall at all. + * We can return 0 to resume the syscall or anything else to go to phase + * 2. If we resume the syscall, we need to put something appropriate in + * regs->orig_ax. + * + * NB: We don't have full pt_regs here, but regs->orig_ax and regs->ax + * are fully functional. + * + * For phase 2's benefit, our return value is: + * 0: resume the syscall + * 1: go to phase 2; no seccomp phase 2 needed + * anything else: go to phase 2; pass return value to seccomp */ -long syscall_trace_enter(struct pt_regs *regs) +unsigned long syscall_trace_enter_phase1(struct pt_regs *regs, u32 arch) { - long ret = 0; + unsigned long ret = 0; + u32 work; + + BUG_ON(regs != task_pt_regs(current)); + + work = ACCESS_ONCE(current_thread_info()->flags) & + _TIF_WORK_SYSCALL_ENTRY; /* * If TIF_NOHZ is set, we are required to call user_exit() before * doing anything that could touch RCU. */ - if (test_thread_flag(TIF_NOHZ)) + if (work & _TIF_NOHZ) { user_exit(); + work &= ~TIF_NOHZ; + } + +#ifdef CONFIG_SECCOMP + /* + * Do seccomp first -- it should minimize exposure of other + * code, and keeping seccomp fast is probably more valuable + * than the rest of this. + */ + if (work & _TIF_SECCOMP) { + struct seccomp_data sd; + + sd.arch = arch; + sd.nr = regs->orig_ax; + sd.instruction_pointer = regs->ip; +#ifdef CONFIG_X86_64 + if (arch == AUDIT_ARCH_X86_64) { + sd.args[0] = regs->di; + sd.args[1] = regs->si; + sd.args[2] = regs->dx; + sd.args[3] = regs->r10; + sd.args[4] = regs->r8; + sd.args[5] = regs->r9; + } else +#endif + { + sd.args[0] = regs->bx; + sd.args[1] = regs->cx; + sd.args[2] = regs->dx; + sd.args[3] = regs->si; + sd.args[4] = regs->di; + sd.args[5] = regs->bp; + } + + BUILD_BUG_ON(SECCOMP_PHASE1_OK != 0); + BUILD_BUG_ON(SECCOMP_PHASE1_SKIP != 1); + + ret = seccomp_phase1(&sd); + if (ret == SECCOMP_PHASE1_SKIP) { + regs->orig_ax = -1; + ret = 0; + } else if (ret != SECCOMP_PHASE1_OK) { + return ret; /* Go directly to phase 2 */ + } + + work &= ~_TIF_SECCOMP; + } +#endif + + /* Do our best to finish without phase 2. */ + if (work == 0) + return ret; /* seccomp and/or nohz only (ret == 0 here) */ + +#ifdef CONFIG_AUDITSYSCALL + if (work == _TIF_SYSCALL_AUDIT) { + /* + * If there is no more work to be done except auditing, + * then audit in phase 1. Phase 2 always audits, so, if + * we audit here, then we can't go on to phase 2. + */ + do_audit_syscall_entry(regs, arch); + return 0; + } +#endif + + return 1; /* Something is enabled that we can't handle in phase 1 */ +} + +/* Returns the syscall nr to run (which should match regs->orig_ax). */ +long syscall_trace_enter_phase2(struct pt_regs *regs, u32 arch, + unsigned long phase1_result) +{ + long ret = 0; + u32 work = ACCESS_ONCE(current_thread_info()->flags) & + _TIF_WORK_SYSCALL_ENTRY; + + BUG_ON(regs != task_pt_regs(current)); /* * If we stepped into a sysenter/syscall insn, it trapped in @@ -1463,17 +1569,21 @@ long syscall_trace_enter(struct pt_regs *regs) * do_debug() and we need to set it again to restore the user * state. If we entered on the slow path, TF was already set. */ - if (test_thread_flag(TIF_SINGLESTEP)) + if (work & _TIF_SINGLESTEP) regs->flags |= X86_EFLAGS_TF; - /* do the secure computing check first */ - if (secure_computing()) { +#ifdef CONFIG_SECCOMP + /* + * Call seccomp_phase2 before running the other hooks so that + * they can see any changes made by a seccomp tracer. + */ + if (phase1_result > 1 && seccomp_phase2(phase1_result)) { /* seccomp failures shouldn't expose any additional code. */ - ret = -1L; - goto out; + return -1; } +#endif - if (unlikely(test_thread_flag(TIF_SYSCALL_EMU))) + if (unlikely(work & _TIF_SYSCALL_EMU)) ret = -1L; if ((ret || test_thread_flag(TIF_SYSCALL_TRACE)) && @@ -1483,23 +1593,22 @@ long syscall_trace_enter(struct pt_regs *regs) if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) trace_sys_enter(regs, regs->orig_ax); - if (is_ia32_task()) - audit_syscall_entry(AUDIT_ARCH_I386, - regs->orig_ax, - regs->bx, regs->cx, - regs->dx, regs->si); -#ifdef CONFIG_X86_64 - else - audit_syscall_entry(AUDIT_ARCH_X86_64, - regs->orig_ax, - regs->di, regs->si, - regs->dx, regs->r10); -#endif + do_audit_syscall_entry(regs, arch); -out: return ret ?: regs->orig_ax; } +long syscall_trace_enter(struct pt_regs *regs) +{ + u32 arch = is_ia32_task() ? AUDIT_ARCH_I386 : AUDIT_ARCH_X86_64; + unsigned long phase1_result = syscall_trace_enter_phase1(regs, arch); + + if (phase1_result == 0) + return regs->orig_ax; + else + return syscall_trace_enter_phase2(regs, arch, phase1_result); +} + void syscall_trace_leave(struct pt_regs *regs) { bool step; -- cgit v1.2.3