From 386b384900a200d5fcabdd4a9c27eb21db606cd4 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 9 Sep 2009 19:08:16 -0700 Subject: Input: i8042 - use boolean type where it makes sense Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042.c | 103 ++++++++++++++++++++++---------------------- 1 file changed, 52 insertions(+), 51 deletions(-) (limited to 'drivers/input/serio/i8042.c') diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 8aaf8fcacf62..61ed7a966c60 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -28,35 +28,35 @@ MODULE_AUTHOR("Vojtech Pavlik "); MODULE_DESCRIPTION("i8042 keyboard and mouse controller driver"); MODULE_LICENSE("GPL"); -static unsigned int i8042_nokbd; +static bool i8042_nokbd; module_param_named(nokbd, i8042_nokbd, bool, 0); MODULE_PARM_DESC(nokbd, "Do not probe or use KBD port."); -static unsigned int i8042_noaux; +static bool i8042_noaux; module_param_named(noaux, i8042_noaux, bool, 0); MODULE_PARM_DESC(noaux, "Do not probe or use AUX (mouse) port."); -static unsigned int i8042_nomux; +static bool i8042_nomux; module_param_named(nomux, i8042_nomux, bool, 0); MODULE_PARM_DESC(nomux, "Do not check whether an active multiplexing conrtoller is present."); -static unsigned int i8042_unlock; +static bool i8042_unlock; module_param_named(unlock, i8042_unlock, bool, 0); MODULE_PARM_DESC(unlock, "Ignore keyboard lock."); -static unsigned int i8042_reset; +static bool i8042_reset; module_param_named(reset, i8042_reset, bool, 0); MODULE_PARM_DESC(reset, "Reset controller during init and cleanup."); -static unsigned int i8042_direct; +static bool i8042_direct; module_param_named(direct, i8042_direct, bool, 0); MODULE_PARM_DESC(direct, "Put keyboard port into non-translated mode."); -static unsigned int i8042_dumbkbd; +static bool i8042_dumbkbd; module_param_named(dumbkbd, i8042_dumbkbd, bool, 0); MODULE_PARM_DESC(dumbkbd, "Pretend that controller can only read data from keyboard"); -static unsigned int i8042_noloop; +static bool i8042_noloop; module_param_named(noloop, i8042_noloop, bool, 0); MODULE_PARM_DESC(noloop, "Disable the AUX Loopback command while probing for the AUX port"); @@ -65,20 +65,20 @@ module_param_named(panicblink, i8042_blink_frequency, uint, 0600); MODULE_PARM_DESC(panicblink, "Frequency with which keyboard LEDs should blink when kernel panics"); #ifdef CONFIG_X86 -static unsigned int i8042_dritek; +static bool i8042_dritek; module_param_named(dritek, i8042_dritek, bool, 0); MODULE_PARM_DESC(dritek, "Force enable the Dritek keyboard extension"); #endif #ifdef CONFIG_PNP -static int i8042_nopnp; +static bool i8042_nopnp; module_param_named(nopnp, i8042_nopnp, bool, 0); MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings"); #endif #define DEBUG #ifdef DEBUG -static int i8042_debug; +static bool i8042_debug; module_param_named(debug, i8042_debug, bool, 0600); MODULE_PARM_DESC(debug, "Turn i8042 debugging mode on and off"); #endif @@ -92,7 +92,7 @@ static DEFINE_SPINLOCK(i8042_lock); struct i8042_port { struct serio *serio; int irq; - unsigned char exists; + bool exists; signed char mux; }; @@ -105,9 +105,9 @@ static struct i8042_port i8042_ports[I8042_NUM_PORTS]; static unsigned char i8042_initial_ctr; static unsigned char i8042_ctr; -static unsigned char i8042_mux_present; -static unsigned char i8042_kbd_irq_registered; -static unsigned char i8042_aux_irq_registered; +static bool i8042_mux_present; +static bool i8042_kbd_irq_registered; +static bool i8042_aux_irq_registered; static unsigned char i8042_suppress_kbd_ack; static struct platform_device *i8042_platform_device; @@ -316,7 +316,7 @@ static int i8042_start(struct serio *serio) { struct i8042_port *port = serio->port_data; - port->exists = 1; + port->exists = true; mb(); return 0; } @@ -330,7 +330,7 @@ static void i8042_stop(struct serio *serio) { struct i8042_port *port = serio->port_data; - port->exists = 0; + port->exists = false; /* * We synchronize with both AUX and KBD IRQs because there is @@ -492,14 +492,15 @@ static int i8042_enable_mux_ports(void) } /* - * i8042_set_mux_mode checks whether the controller has an active - * multiplexor and puts the chip into Multiplexed (1) or Legacy (0) mode. + * i8042_set_mux_mode checks whether the controller has an + * active multiplexor and puts the chip into Multiplexed (true) + * or Legacy (false) mode. */ -static int i8042_set_mux_mode(unsigned int mode, unsigned char *mux_version) +static int i8042_set_mux_mode(bool multiplex, unsigned char *mux_version) { - unsigned char param; + unsigned char param, val; /* * Get rid of bytes in the queue. */ @@ -511,14 +512,21 @@ static int i8042_set_mux_mode(unsigned int mode, unsigned char *mux_version) * mouse interface, the last should be version. */ - param = 0xf0; - if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param != 0xf0) + param = val = 0xf0; + if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param != val) + return -1; + param = val = multiplex ? 0x56 : 0xf6; + if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param != val) return -1; - param = mode ? 0x56 : 0xf6; - if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param != (mode ? 0x56 : 0xf6)) + param = val = multiplex ? 0xa4 : 0xa5; + if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param == val) return -1; - param = mode ? 0xa4 : 0xa5; - if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param == (mode ? 0xa4 : 0xa5)) + +/* + * Workaround for interference with USB Legacy emulation + * that causes a v10.12 MUX to be found. + */ + if (param == 0xac) return -1; if (mux_version) @@ -537,14 +545,7 @@ static int __devinit i8042_check_mux(void) { unsigned char mux_version; - if (i8042_set_mux_mode(1, &mux_version)) - return -1; - -/* - * Workaround for interference with USB Legacy emulation - * that causes a v10.12 MUX to be found. - */ - if (mux_version == 0xAC) + if (i8042_set_mux_mode(true, &mux_version)) return -1; printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev %d.%d.\n", @@ -561,7 +562,7 @@ static int __devinit i8042_check_mux(void) return -EIO; } - i8042_mux_present = 1; + i8042_mux_present = true; return 0; } @@ -570,7 +571,7 @@ static int __devinit i8042_check_mux(void) * The following is used to test AUX IRQ delivery. */ static struct completion i8042_aux_irq_delivered __devinitdata; -static int i8042_irq_being_tested __devinitdata; +static bool i8042_irq_being_tested __devinitdata; static irqreturn_t __devinit i8042_aux_test_irq(int irq, void *dev_id) { @@ -597,7 +598,7 @@ static irqreturn_t __devinit i8042_aux_test_irq(int irq, void *dev_id) * verifies success by readinng CTR. Used when testing for presence of AUX * port. */ -static int __devinit i8042_toggle_aux(int on) +static int __devinit i8042_toggle_aux(bool on) { unsigned char param; int i; @@ -628,8 +629,8 @@ static int __devinit i8042_toggle_aux(int on) static int __devinit i8042_check_aux(void) { int retval = -1; - int irq_registered = 0; - int aux_loop_broken = 0; + bool irq_registered = false; + bool aux_loop_broken = false; unsigned long flags; unsigned char param; @@ -666,19 +667,19 @@ static int __devinit i8042_check_aux(void) * mark it as broken */ if (!retval) - aux_loop_broken = 1; + aux_loop_broken = true; } /* * Bit assignment test - filters out PS/2 i8042's in AT mode */ - if (i8042_toggle_aux(0)) { + if (i8042_toggle_aux(false)) { printk(KERN_WARNING "Failed to disable AUX port, but continuing anyway... Is this a SiS?\n"); printk(KERN_WARNING "If AUX port is really absent please use the 'i8042.noaux' option.\n"); } - if (i8042_toggle_aux(1)) + if (i8042_toggle_aux(true)) return -1; /* @@ -699,7 +700,7 @@ static int __devinit i8042_check_aux(void) "i8042", i8042_platform_device)) goto out; - irq_registered = 1; + irq_registered = true; if (i8042_enable_aux_port()) goto out; @@ -707,7 +708,7 @@ static int __devinit i8042_check_aux(void) spin_lock_irqsave(&i8042_lock, flags); init_completion(&i8042_aux_irq_delivered); - i8042_irq_being_tested = 1; + i8042_irq_being_tested = true; param = 0xa5; retval = __i8042_command(¶m, I8042_CMD_AUX_LOOP & 0xf0ff); @@ -844,7 +845,7 @@ static int i8042_controller_init(void) */ if (~i8042_ctr & I8042_CTR_XLATE) - i8042_direct = 1; + i8042_direct = true; /* * Set nontranslated mode for the kbd interface if requested by an option. @@ -892,7 +893,7 @@ static void i8042_controller_reset(void) */ if (i8042_mux_present) - i8042_set_mux_mode(0, NULL); + i8042_set_mux_mode(false, NULL); /* * Reset the controller if requested. @@ -1025,7 +1026,7 @@ static int i8042_pm_restore(struct device *dev) #endif if (i8042_mux_present) { - if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports()) + if (i8042_set_mux_mode(true, NULL) || i8042_enable_mux_ports()) printk(KERN_WARNING "i8042: failed to resume active multiplexor, " "mouse won't work.\n"); @@ -1167,7 +1168,7 @@ static void i8042_free_irqs(void) if (i8042_kbd_irq_registered) free_irq(I8042_KBD_IRQ, i8042_platform_device); - i8042_aux_irq_registered = i8042_kbd_irq_registered = 0; + i8042_aux_irq_registered = i8042_kbd_irq_registered = false; } static int __devinit i8042_setup_aux(void) @@ -1201,7 +1202,7 @@ static int __devinit i8042_setup_aux(void) if (aux_enable()) goto err_free_irq; - i8042_aux_irq_registered = 1; + i8042_aux_irq_registered = true; return 0; err_free_irq: @@ -1228,7 +1229,7 @@ static int __devinit i8042_setup_kbd(void) if (error) goto err_free_irq; - i8042_kbd_irq_registered = 1; + i8042_kbd_irq_registered = true; return 0; err_free_irq: -- cgit v1.2.3