From 33e73819e7e48d76d40e292be8d4213684a3369f Mon Sep 17 00:00:00 2001 From: Lei Wen Date: Tue, 7 Jun 2011 03:01:06 -0700 Subject: mtd: pxa3xx_nand: fix nand detection issue commit 0fab028b77d714ad302404b23306cf7adb885223 upstream. When keep_config is set, the detection would goes different routine. That the driver would read out the setting which is set previously by bootloader. While most bootloader keep the irq mask as off, and current driver need all irq default open, keep_config behavior would lead to no irq at all. Signed-off-by: Lei Wen Tested-by: Daniel Mack Signed-off-by: Artem Bityutskiy Signed-off-by: Greg Kroah-Hartman --- drivers/mtd/nand/pxa3xx_nand.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 1fb3b3a80581..faa0edd28256 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -813,7 +813,7 @@ static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info) info->page_size = ndcr & NDCR_PAGE_SZ ? 2048 : 512; /* set info fields needed to read id */ info->read_id_bytes = (info->page_size == 2048) ? 4 : 2; - info->reg_ndcr = ndcr; + info->reg_ndcr = ndcr & ~NDCR_INT_MASK; info->cmdset = &default_cmdset; info->ndtr0cs0 = nand_readl(info, NDTR0CS0); @@ -882,7 +882,7 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) struct pxa3xx_nand_info *info = mtd->priv; struct platform_device *pdev = info->pdev; struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data; - struct nand_flash_dev pxa3xx_flash_ids[2] = { {NULL,}, {NULL,} }; + struct nand_flash_dev pxa3xx_flash_ids[2], *def = NULL; const struct pxa3xx_nand_flash *f = NULL; struct nand_chip *chip = mtd->priv; uint32_t id = -1; @@ -942,8 +942,10 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) pxa3xx_flash_ids[0].erasesize = f->page_size * f->page_per_block; if (f->flash_width == 16) pxa3xx_flash_ids[0].options = NAND_BUSWIDTH_16; + pxa3xx_flash_ids[1].name = NULL; + def = pxa3xx_flash_ids; KEEP_CONFIG: - if (nand_scan_ident(mtd, 1, pxa3xx_flash_ids)) + if (nand_scan_ident(mtd, 1, def)) return -ENODEV; /* calculate addressing information */ info->col_addr_cycles = (mtd->writesize >= 2048) ? 2 : 1; @@ -954,9 +956,9 @@ KEEP_CONFIG: info->row_addr_cycles = 2; mtd->name = mtd_names[0]; chip->ecc.mode = NAND_ECC_HW; - chip->ecc.size = f->page_size; + chip->ecc.size = info->page_size; - chip->options = (f->flash_width == 16) ? NAND_BUSWIDTH_16 : 0; + chip->options = (info->reg_ndcr & NDCR_DWIDTH_M) ? NAND_BUSWIDTH_16 : 0; chip->options |= NAND_NO_AUTOINCR; chip->options |= NAND_NO_READRDY; -- cgit v1.2.3