From fea3409112a93581db18da4c4332c8bf8d68af6b Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 30 Jul 2007 17:06:16 -0400 Subject: USB: add direction bit to urb->transfer_flags This patch (as945) adds a bit to urb->transfer_flags for recording the direction of the URB. The bit is set/cleared automatically in usb_submit_urb() so drivers don't have to worry about it (although as a result, it isn't valid until the URB has been submitted). Inline routines are added for easily checking an URB's direction. They replace calls to usb_pipein in the DMA-mapping parts of hcd.c. For non-control endpoints, the direction is determined directly from the endpoint descriptor. However control endpoints are bi-directional; for them the direction is determined from the bRequestType byte and the wLength value in the setup packet. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'include/linux/usb.h') diff --git a/include/linux/usb.h b/include/linux/usb.h index 818a1b4f737a..9d08f5a5ba76 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1021,6 +1021,8 @@ extern int usb_disabled(void); /* * urb->transfer_flags: + * + * Note: URB_DIR_IN/OUT is automatically set in usb_submit_urb(). */ #define URB_SHORT_NOT_OK 0x0001 /* report short reads as errors */ #define URB_ISO_ASAP 0x0002 /* iso-only, urb->start_frame @@ -1033,6 +1035,10 @@ extern int usb_disabled(void); * needed */ #define URB_FREE_BUFFER 0x0100 /* Free transfer buffer with the URB */ +#define URB_DIR_IN 0x0200 /* Transfer from device to host */ +#define URB_DIR_OUT 0 +#define URB_DIR_MASK URB_DIR_IN + struct usb_iso_packet_descriptor { unsigned int offset; unsigned int length; /* expected length */ @@ -1380,6 +1386,30 @@ extern void usb_unanchor_urb(struct urb *urb); extern int usb_wait_anchor_empty_timeout(struct usb_anchor *anchor, unsigned int timeout); +/** + * usb_urb_dir_in - check if an URB describes an IN transfer + * @urb: URB to be checked + * + * Returns 1 if @urb describes an IN transfer (device-to-host), + * otherwise 0. + */ +static inline int usb_urb_dir_in(struct urb *urb) +{ + return (urb->transfer_flags & URB_DIR_MASK) != URB_DIR_OUT; +} + +/** + * usb_urb_dir_out - check if an URB describes an OUT transfer + * @urb: URB to be checked + * + * Returns 1 if @urb describes an OUT transfer (host-to-device), + * otherwise 0. + */ +static inline int usb_urb_dir_out(struct urb *urb) +{ + return (urb->transfer_flags & URB_DIR_MASK) == URB_DIR_OUT; +} + void *usb_buffer_alloc (struct usb_device *dev, size_t size, gfp_t mem_flags, dma_addr_t *dma); void usb_buffer_free (struct usb_device *dev, size_t size, -- cgit v1.2.3