From be80893d309e256fe05a1e55d440bd6188ba2748 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Mon, 31 Oct 2011 17:06:35 -0400 Subject: clocksource: Avoid selecting mult values that might overflow when adjusted commit d65670a78cdbfae94f20a9e05ec705871d7cdf2b upstream. For some frequencies, the clocks_calc_mult_shift() function will unfortunately select mult values very close to 0xffffffff. This has the potential to overflow when NTP adjusts the clock, adding to the mult value. This patch adds a clocksource.maxadj value, which provides an approximation of an 11% adjustment(NTP limits adjustments to 500ppm and the tick adjustment is limited to 10%), which could be made to the clocksource.mult value. This is then used to both check that the current mult value won't overflow/underflow, as well as warning us if the timekeeping_adjust() code pushes over that 11% boundary. v2: Fix max_adjustment calculation, and improve WARN_ONCE messages. v3: Don't warn before maxadj has actually been set CC: Yong Zhang CC: David Daney CC: Thomas Gleixner CC: Chen Jie CC: zhangfx Reported-by: Chen Jie Reported-by: zhangfx Tested-by: Yong Zhang Signed-off-by: John Stultz Signed-off-by: Greg Kroah-Hartman --- kernel/time/clocksource.c | 58 +++++++++++++++++++++++++++++++++++++++-------- kernel/time/timekeeping.c | 7 ++++++ 2 files changed, 55 insertions(+), 10 deletions(-) (limited to 'kernel') diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c index e0980f0d9a0a..8277439b0045 100644 --- a/kernel/time/clocksource.c +++ b/kernel/time/clocksource.c @@ -493,6 +493,22 @@ void clocksource_touch_watchdog(void) clocksource_resume_watchdog(); } +/** + * clocksource_max_adjustment- Returns max adjustment amount + * @cs: Pointer to clocksource + * + */ +static u32 clocksource_max_adjustment(struct clocksource *cs) +{ + u64 ret; + /* + * We won't try to correct for more then 11% adjustments (110,000 ppm), + */ + ret = (u64)cs->mult * 11; + do_div(ret,100); + return (u32)ret; +} + /** * clocksource_max_deferment - Returns max time the clocksource can be deferred * @cs: Pointer to clocksource @@ -505,25 +521,28 @@ static u64 clocksource_max_deferment(struct clocksource *cs) /* * Calculate the maximum number of cycles that we can pass to the * cyc2ns function without overflowing a 64-bit signed result. The - * maximum number of cycles is equal to ULLONG_MAX/cs->mult which - * is equivalent to the below. - * max_cycles < (2^63)/cs->mult - * max_cycles < 2^(log2((2^63)/cs->mult)) - * max_cycles < 2^(log2(2^63) - log2(cs->mult)) - * max_cycles < 2^(63 - log2(cs->mult)) - * max_cycles < 1 << (63 - log2(cs->mult)) + * maximum number of cycles is equal to ULLONG_MAX/(cs->mult+cs->maxadj) + * which is equivalent to the below. + * max_cycles < (2^63)/(cs->mult + cs->maxadj) + * max_cycles < 2^(log2((2^63)/(cs->mult + cs->maxadj))) + * max_cycles < 2^(log2(2^63) - log2(cs->mult + cs->maxadj)) + * max_cycles < 2^(63 - log2(cs->mult + cs->maxadj)) + * max_cycles < 1 << (63 - log2(cs->mult + cs->maxadj)) * Please note that we add 1 to the result of the log2 to account for * any rounding errors, ensure the above inequality is satisfied and * no overflow will occur. */ - max_cycles = 1ULL << (63 - (ilog2(cs->mult) + 1)); + max_cycles = 1ULL << (63 - (ilog2(cs->mult + cs->maxadj) + 1)); /* * The actual maximum number of cycles we can defer the clocksource is * determined by the minimum of max_cycles and cs->mask. + * Note: Here we subtract the maxadj to make sure we don't sleep for + * too long if there's a large negative adjustment. */ max_cycles = min_t(u64, max_cycles, (u64) cs->mask); - max_nsecs = clocksource_cyc2ns(max_cycles, cs->mult, cs->shift); + max_nsecs = clocksource_cyc2ns(max_cycles, cs->mult - cs->maxadj, + cs->shift); /* * To ensure that the clocksource does not wrap whilst we are idle, @@ -642,7 +661,6 @@ static void clocksource_enqueue(struct clocksource *cs) void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq) { u64 sec; - /* * Calc the maximum number of seconds which we can run before * wrapping around. For clocksources which have a mask > 32bit @@ -663,6 +681,20 @@ void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq) clocks_calc_mult_shift(&cs->mult, &cs->shift, freq, NSEC_PER_SEC / scale, sec * scale); + + /* + * for clocksources that have large mults, to avoid overflow. + * Since mult may be adjusted by ntp, add an safety extra margin + * + */ + cs->maxadj = clocksource_max_adjustment(cs); + while ((cs->mult + cs->maxadj < cs->mult) + || (cs->mult - cs->maxadj > cs->mult)) { + cs->mult >>= 1; + cs->shift--; + cs->maxadj = clocksource_max_adjustment(cs); + } + cs->max_idle_ns = clocksource_max_deferment(cs); } EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale); @@ -703,6 +735,12 @@ EXPORT_SYMBOL_GPL(__clocksource_register_scale); */ int clocksource_register(struct clocksource *cs) { + /* calculate max adjustment for given mult/shift */ + cs->maxadj = clocksource_max_adjustment(cs); + WARN_ONCE(cs->mult + cs->maxadj < cs->mult, + "Clocksource %s might overflow on 11%% adjustment\n", + cs->name); + /* calculate max idle time permitted for this clocksource */ cs->max_idle_ns = clocksource_max_deferment(cs); diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index da4a77815fa8..6f9798bf2409 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -824,6 +824,13 @@ static void timekeeping_adjust(s64 offset) } else return; + WARN_ONCE(timekeeper.clock->maxadj && + (timekeeper.mult + adj > timekeeper.clock->mult + + timekeeper.clock->maxadj), + "Adjusting %s more then 11%% (%ld vs %ld)\n", + timekeeper.clock->name, (long)timekeeper.mult + adj, + (long)timekeeper.clock->mult + + timekeeper.clock->maxadj); timekeeper.mult += adj; timekeeper.xtime_interval += interval; timekeeper.xtime_nsec -= offset; -- cgit v1.2.3