From 3a4fa0a25da81600ea0bcd75692ae8ca6050d165 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Fri, 19 Oct 2007 23:10:43 +0200 Subject: Fix misspellings of "system", "controller", "interrupt" and "necessary". Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day Signed-off-by: Adrian Bunk --- sound/core/seq/seq_midi_emul.c | 8 ++++---- sound/drivers/opl3/opl3_midi.c | 2 +- sound/isa/es18xx.c | 4 ++-- sound/mips/au1x00.c | 8 ++++---- sound/pci/au88x0/au88x0.c | 2 +- sound/soc/soc-core.c | 2 +- sound/soc/soc-dapm.c | 2 +- sound/synth/emux/emux_synth.c | 2 +- 8 files changed, 15 insertions(+), 15 deletions(-) (limited to 'sound') diff --git a/sound/core/seq/seq_midi_emul.c b/sound/core/seq/seq_midi_emul.c index d7c4fb86b9eb..17b3e6f13ca3 100644 --- a/sound/core/seq/seq_midi_emul.c +++ b/sound/core/seq/seq_midi_emul.c @@ -71,7 +71,7 @@ static void reset_all_channels(struct snd_midi_channel_set *chset); * such as GM, GS and XG. * There modes that this module will run in are: * Generic MIDI - no interpretation at all, it will just save current values - * of controlers etc. + * of controllers etc. * GM - You can use all gm_ prefixed elements of chan. Controls, RPN, NRPN, * SysEx will be interpreded as defined in General Midi. * GS - You can use all gs_ prefixed elements of chan. Codes for GS will be @@ -176,7 +176,7 @@ snd_midi_process_event(struct snd_midi_op *ops, ev->data.control.value); break; case SNDRV_SEQ_EVENT_NONREGPARAM: - /* Break it back into its controler values */ + /* Break it back into its controller values */ chan->param_type = SNDRV_MIDI_PARAM_TYPE_NONREGISTERED; chan->control[MIDI_CTL_MSB_DATA_ENTRY] = (ev->data.control.value >> 7) & 0x7f; @@ -189,7 +189,7 @@ snd_midi_process_event(struct snd_midi_op *ops, nrpn(ops, drv, chan, chanset); break; case SNDRV_SEQ_EVENT_REGPARAM: - /* Break it back into its controler values */ + /* Break it back into its controller values */ chan->param_type = SNDRV_MIDI_PARAM_TYPE_REGISTERED; chan->control[MIDI_CTL_MSB_DATA_ENTRY] = (ev->data.control.value >> 7) & 0x7f; @@ -267,7 +267,7 @@ note_off(struct snd_midi_op *ops, void *drv, struct snd_midi_channel *chan, } /* - * Do all driver independent operations for this controler and pass + * Do all driver independent operations for this controller and pass * events that need to take place immediately to the driver. */ static void diff --git a/sound/drivers/opl3/opl3_midi.c b/sound/drivers/opl3/opl3_midi.c index 1b6f227af370..3557b6e20eb5 100644 --- a/sound/drivers/opl3/opl3_midi.c +++ b/sound/drivers/opl3/opl3_midi.c @@ -808,7 +808,7 @@ static void snd_opl3_pitch_ctrl(struct snd_opl3 *opl3, struct snd_midi_channel * } /* - * Deal with a controler type event. This includes all types of + * Deal with a controller type event. This includes all types of * control events, not just the midi controllers */ void snd_opl3_control(void *p, int type, struct snd_midi_channel *chan) diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c index 4a7367a8ff9d..c1af28fd4a1f 100644 --- a/sound/isa/es18xx.c +++ b/sound/isa/es18xx.c @@ -623,7 +623,7 @@ static int snd_es18xx_capture_prepare(struct snd_pcm_substream *substream) (snd_pcm_format_width(runtime->format) == 16 ? 0x04 : 0x00) | (snd_pcm_format_unsigned(runtime->format) ? 0x00 : 0x20)); - /* Set DMA controler */ + /* Set DMA controller */ snd_dma_program(chip->dma1, runtime->dma_addr, size, DMA_MODE_READ | DMA_AUTOINIT); return 0; @@ -689,7 +689,7 @@ static int snd_es18xx_playback2_prepare(struct snd_es18xx *chip, (snd_pcm_format_width(runtime->format) == 16 ? 0x04 : 0x00) | (snd_pcm_format_unsigned(runtime->format) ? 0x00 : 0x20)); - /* Set DMA controler */ + /* Set DMA controller */ snd_dma_program(chip->dma1, runtime->dma_addr, size, DMA_MODE_WRITE | DMA_AUTOINIT); return 0; diff --git a/sound/mips/au1x00.c b/sound/mips/au1x00.c index 8a61a1191861..24460a558bf7 100644 --- a/sound/mips/au1x00.c +++ b/sound/mips/au1x00.c @@ -498,8 +498,8 @@ snd_au1000_ac97_read(struct snd_ac97 *ac97, unsigned short reg) int i; spin_lock(&au1000->ac97_lock); -/* would rather use the interupt than this polling but it works and I can't -get the interupt driven case to work efficiently */ +/* would rather use the interrupt than this polling but it works and I can't +get the interrupt driven case to work efficiently */ for (i = 0; i < 0x5000; i++) if (!(au1000->ac97_ioport->status & AC97C_CP)) break; @@ -535,8 +535,8 @@ snd_au1000_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short int i; spin_lock(&au1000->ac97_lock); -/* would rather use the interupt than this polling but it works and I can't -get the interupt driven case to work efficiently */ +/* would rather use the interrupt than this polling but it works and I can't +get the interrupt driven case to work efficiently */ for (i = 0; i < 0x5000; i++) if (!(au1000->ac97_ioport->status & AC97C_CP)) break; diff --git a/sound/pci/au88x0/au88x0.c b/sound/pci/au88x0/au88x0.c index f70286a7364a..26819e2f5761 100644 --- a/sound/pci/au88x0/au88x0.c +++ b/sound/pci/au88x0/au88x0.c @@ -191,7 +191,7 @@ snd_vortex_create(struct snd_card *card, struct pci_dev *pci, vortex_t ** rchip) /* Init audio core. * This must be done before we do request_irq otherwise we can get spurious - * interupts that we do not handle properly and make a mess of things */ + * interrupts that we do not handle properly and make a mess of things */ if ((err = vortex_core_init(chip)) != 0) { printk(KERN_ERR "hw core init failed\n"); goto core_out; diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 91651bdfa761..e6a67b58f296 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -264,7 +264,7 @@ out: } /* - * Power down the audio subsytem pmdown_time msecs after close is called. + * Power down the audio subsystem pmdown_time msecs after close is called. * This is to ensure there are no pops or clicks in between any music tracks * due to DAPM power cycling. */ diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index b3193e687db7..29a546fecacf 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -24,7 +24,7 @@ * o Automatic Mic Bias support * o Jack insertion power event initiation - e.g. hp insertion will enable * sinks, dacs, etc - * o Delayed powerdown of audio susbsytem to reduce pops between a quick + * o Delayed powerdown of audio susbsystem to reduce pops between a quick * device reopen. * * Todo: diff --git a/sound/synth/emux/emux_synth.c b/sound/synth/emux/emux_synth.c index 3733118d39bb..478369bb38c3 100644 --- a/sound/synth/emux/emux_synth.c +++ b/sound/synth/emux/emux_synth.c @@ -317,7 +317,7 @@ snd_emux_update_port(struct snd_emux_port *port, int update) /* - * Deal with a controler type event. This includes all types of + * Deal with a controller type event. This includes all types of * control events, not just the midi controllers */ void -- cgit v1.2.3