/* * Copyright (C) 2016 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include / { aliases { mxcfb0 = &mxcfb1; mxcfb1 = &mxcfb2; mxcfb2 = &mxcfb3; mxcfb3 = &mxcfb4; }; soc { busfreq { fsl,max_ddr_freq = <400000000>; status = "okay"; }; }; hannstar_cabc { compatible = "hannstar,cabc"; lvds0 { gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; }; }; chosen { stdout-path = &uart1; }; memory: memory { reg = <0x10000000 0x40000000>; }; regulators { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; reg_usb_otg_vbus: regulator@0 { compatible = "regulator-fixed"; reg = <0>; regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio3 22 0>; enable-active-high; }; }; sound-hdmi { compatible = "fsl,imx6q-audio-hdmi", "fsl,imx-audio-hdmi"; model = "imx-audio-hdmi"; hdmi-controller = <&hdmi_audio>; }; mxcfb1: fb@0 { compatible = "fsl,mxc_sdc_fb"; disp_dev = "ldb"; interface_pix_fmt = "RGB666"; default_bpp = <16>; int_clk = <0>; late_init = <0>; status = "disabled"; }; mxcfb2: fb@1 { compatible = "fsl,mxc_sdc_fb"; disp_dev = "hdmi"; interface_pix_fmt = "RGB24"; mode_str ="1920x1080M@60"; default_bpp = <24>; int_clk = <0>; late_init = <0>; status = "disabled"; }; mxcfb3: fb@2 { compatible = "fsl,mxc_sdc_fb"; disp_dev = "lcd"; interface_pix_fmt = "RGB565"; mode_str ="CLAA-WVGA"; default_bpp = <16>; int_clk = <0>; late_init = <0>; status = "disabled"; }; mxcfb4: fb@3 { compatible = "fsl,mxc_sdc_fb"; disp_dev = "ldb"; interface_pix_fmt = "RGB666"; default_bpp = <16>; int_clk = <0>; late_init = <0>; status = "disabled"; }; backlight { compatible = "pwm-backlight"; pwms = <&pwm4 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; status = "okay"; }; v4l2_out { compatible = "fsl,mxc_v4l2_output"; status = "okay"; }; gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; power { label = "Power Button"; gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; wakeup-source; linux,code = ; }; }; }; ®_arm { vin-supply = <&sw1a_reg>; regulator-allow-bypass; }; ®_soc { vin-supply = <&sw1c_reg>; regulator-allow-bypass; }; ®_pu { vin-supply = <&sw1c_reg>; regulator-allow-bypass; }; &clks { assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>; assigned-clock-parents = <&clks IMX6QDL_CLK_MMDC_CH1_AXI>, <&clks IMX6QDL_CLK_MMDC_CH1_AXI>; }; &ecspi1 { fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio2 30 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q128a13", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; }; &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; }; &i2c2 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; hdmi_edid: edid@50 { compatible = "fsl,imx6-hdmi-i2c"; reg = <0x50>; }; pmic: pfuze100@08 { compatible = "fsl,pfuze100"; reg = <0x08>; regulators { sw1a_reg: sw1ab { regulator-min-microvolt = <300000>; regulator-max-microvolt = <1875000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <6250>; }; sw1c_reg: sw1c { regulator-min-microvolt = <300000>; regulator-max-microvolt = <1875000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <6250>; }; sw2_reg: sw2 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; sw3a_reg: sw3a { regulator-min-microvolt = <400000>; regulator-max-microvolt = <1250000>; regulator-boot-on; regulator-always-on; }; sw3b_reg: sw3b { regulator-min-microvolt = <400000>; regulator-max-microvolt = <1200000>; regulator-boot-on; regulator-always-on; }; sw4_reg: sw4 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; swbst_reg: swbst { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5150000>; regulator-boot-on; regulator-always-on; }; snvs_reg: vsnvs { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3000000>; regulator-boot-on; regulator-always-on; }; vref_reg: vrefddr { regulator-boot-on; regulator-always-on; }; vgen1_reg: vgen1 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <1550000>; regulator-always-on; }; vgen2_reg: vgen2 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <1550000>; regulator-always-on; }; vgen3_reg: vgen3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2800000>; regulator-always-on; }; vgen4_reg: vgen4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2500000>; regulator-always-on; }; vgen5_reg: vgen5 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vgen6_reg: vgen6 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; }; }; egalax_ts@04 { compatible = "eeti,egalax_ts"; reg = <0x04>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2_egalax_int>; interrupt-parent = <&gpio6>; interrupts = <8 2>; wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; }; }; &i2c3 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; egalax_ts@04 { compatible = "eeti,egalax_ts"; reg = <0x04>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3_egalax_int>; interrupt-parent = <&gpio6>; interrupts = <7 2>; wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; }; touchscreen@01 { compatible = "vtl,ct365"; reg = <0x01>; interrupt-parent = <&gpio6>; interrupts = <14 0>; gpios = <&gpio4 10 0>; }; }; &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; imx6qdl-sabresd { pinctrl_hog: hoggrp { fsl,pins = < MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000 MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000 MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000 MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x80000000 MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x80000000 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 >; }; pinctrl_gpio_keys: gpio_keysgrp { fsl,pins = < MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 >; }; pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 >; }; pinctrl_i2c2_egalax_int: egalax_i2c2_intgrp { fsl,pins = < MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x80000000 >; }; pinctrl_i2c3_egalax_int: egalax_i2c3_intgrp { fsl,pins = < MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000 >; }; pinctrl_hdmi_cec: hdmicecgrp { fsl,pins = < MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x108b0 >; }; pinctrl_hdmi_hdcp: hdmihdcpgrp { fsl,pins = < MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1 MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1 >; }; pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 >; }; pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 >; }; pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 >; }; pinctrl_pwm4: pwm4grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 >; }; pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 >; }; pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 >; }; pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 >; }; pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 >; }; pinctrl_wdog: wdoggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__WDOG2_B 0x80000000 >; }; }; }; &dcic1 { dcic_id = <0>; dcic_mux = "dcic-hdmi"; status = "okay"; }; &dcic2 { dcic_id = <1>; dcic_mux = "dcic-lvds1"; status = "okay"; }; &gpc { fsl,ldo-bypass = <1>; }; &hdmi_audio { status = "okay"; }; &hdmi_cec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hdmi_cec>; status = "okay"; }; &hdmi_core { ipu_id = <0>; disp_id = <1>; status = "okay"; }; &hdmi_video { fsl,phy_reg_vlev = <0x0294>; fsl,phy_reg_cksymtx = <0x800d>; status = "okay"; }; &ldb { status = "okay"; lvds-channel@0 { fsl,data-mapping = "spwg"; fsl,data-width = <18>; status = "okay"; display-timings { native-mode = <&timing0>; timing0: hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; hback-porch = <220>; hfront-porch = <40>; vback-porch = <21>; vfront-porch = <7>; hsync-len = <60>; vsync-len = <10>; }; }; }; lvds-channel@1 { fsl,data-mapping = "spwg"; fsl,data-width = <18>; primary; status = "okay"; display-timings { native-mode = <&timing1>; timing1: hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; hback-porch = <220>; hfront-porch = <40>; vback-porch = <21>; vfront-porch = <7>; hsync-len = <60>; vsync-len = <10>; }; }; }; }; &pwm4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; }; &snvs_poweroff { status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; &usbotg { vbus-supply = <®_usb_otg_vbus>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; srp-disable; hnp-disable; adp-disable; status = "okay"; }; &usbphy1 { fsl,tx-d-cal = <106>; }; &usbphy2 { fsl,tx-d-cal = <106>; }; &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; no-1-8-v; keep-power-in-suspend; enable-sdio-wakeup; status = "okay"; }; &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <4>; cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; no-1-8-v; keep-power-in-suspend; enable-sdio-wakeup; status = "okay"; }; &wdog1 { status = "disabled"; }; &wdog2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; fsl,ext-reset-output; status = "okay"; };