/* * Copyright 2016 Toradex AG * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a * whole. * * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following * conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ / { aliases { rtc0 = &rtc; rtc1 = &snvs_rtc; }; chosen { stdout-path = "serial0:115200n8"; }; /* fixed crystal dedicated to mpc258x */ clk16m: clk16m { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <16000000>; }; extcon_usbc_det: usbc_det { compatible = "linux,extcon-usb-gpio"; id-gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbc_det>; }; gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpiokeys>; power { label = "Wake-Up"; gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; linux,code = ; debounce-interval = <10>; wakeup-source; }; }; reg_3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; reg_5v0: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "5V"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; reg_usbh_vbus: regulator-usbh-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh_reg>; regulator-name = "VCC_USB[1-4]"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; vin-supply = <®_5v0>; }; }; &adc1 { status = "okay"; }; &adc2 { status = "okay"; }; &ecspi3 { status = "okay"; mcp2515: can@0 { compatible = "microchip,mcp2515"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can_int>; reg = <0>; clocks = <&clk16m>; interrupt-parent = <&gpio5>; interrupts = <2 IRQ_TYPE_EDGE_FALLING>; spi-max-frequency = <10000000>; vdd-supply = <®_3v3>; xceiver-supply = <®_5v0>; status = "disabled"; }; spidev0: spidev@0 { compatible = "toradex,evalspi"; reg = <0>; spi-max-frequency = <23000000>; status = "okay"; }; }; &fec1 { status = "okay"; }; &i2c4 { status = "okay"; /* M41T0M6 real time clock on carrier board */ rtc: m41t0m6@68 { compatible = "st,m41t0"; reg = <0x68>; }; }; &pwm1 { status = "okay"; }; &pwm2 { status = "okay"; }; &pwm3 { status = "okay"; }; &pwm4 { status = "okay"; }; &uart1 { status = "okay"; }; &uart2 { status = "okay"; }; &uart3 { status = "okay"; }; &usbotg1 { extcon = <0>, <&extcon_usbc_det>; status = "okay"; }; &usdhc1 { keep-power-in-suspend; wakeup-source; vmmc-supply = <®_3v3>; status = "okay"; };