/* * l2switch.c * * Sub-architcture dependant initialization code for the Freescale * 5441X and Vybrid L2 Switch module. * * Copyright 2010-2012 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define ENET_PALR 0x0e4 #define ENET_PAUR 0x0e8 static unsigned char default_mac[ETH_ALEN] = { 0x00, 0x04, 0x9F, 0x00, 0xB3, 0x49}; /* FEC mac registers set by bootloader */ static int switch_get_mac_addr(unsigned char *mac) { unsigned int value; value = readl(MVF_IO_ADDRESS(MVF_FEC_BASE_ADDR) + ENET_PALR); mac[2] = value & 0xff; mac[3] = (value >> 8) & 0xff; mac[4] = (value >> 16) & 0xff; mac[5] = (value >> 24) & 0xff; value = readl(MVF_IO_ADDRESS(MVF_FEC_BASE_ADDR) + ENET_PAUR); mac[0] = (value >> 16) & 0xff; mac[1] = (value >> 24) & 0xff; return 0; } struct platform_device *__init mvf_init_switch( struct switch_platform_data pdata) { struct resource res[] = { { .start = MVF_L2SWITCH_BASE_ADDR, .end = MVF_L2SWITCH_BASE_ADDR + SZ_4K - 1 , .flags = IORESOURCE_MEM, }, { .start = MVF_L2SWITCH_MACBASE_ADDR, .end = MVF_L2SWITCH_MACBASE_ADDR + SZ_16K - 1, .flags = IORESOURCE_MEM, }, { .start = MVF_MAC0_BASE_ADDR, .end = MVF_MAC0_BASE_ADDR + SZ_8K - 1, .flags = IORESOURCE_MEM, }, { .start = MVF_INT_ENET_SWITCH, .end = MVF_INT_ENET_SWITCH, .flags = IORESOURCE_IRQ, }, }; switch_get_mac_addr(pdata.mac); if (!is_valid_ether_addr(pdata.mac)) memcpy(pdata.mac, default_mac, ETH_ALEN); return imx_add_platform_device_dmamask("switch", 0, res, ARRAY_SIZE(res), &pdata, sizeof(pdata), DMA_BIT_MASK(32)); }