/* * Copyright 2018 NXP * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ / { sound-hdmi { status = "disabled"; }; }; &hdmi { status = "disabled"; }; &dcss { status = "okay"; disp-dev = "mipi_disp"; clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>, <&clk IMX8MQ_CLK_DISP_AXI_ROOT>, <&clk IMX8MQ_CLK_DISP_RTRM_ROOT>, <&clk IMX8MQ_CLK_DC_PIXEL>, <&clk IMX8MQ_CLK_DISP_DTRC>, <&clk IMX8MQ_VIDEO_PLL1>, <&clk IMX8MQ_CLK_27M>, <&clk IMX8MQ_CLK_25M>; clock-names = "apb", "axi", "rtrm", "pix", "dtrc", "pll", "pll_src1", "pll_src2"; assigned-clocks = <&clk IMX8MQ_CLK_DC_PIXEL>, <&clk IMX8MQ_CLK_DISP_AXI>, <&clk IMX8MQ_CLK_DISP_RTRM>; assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>, <&clk IMX8MQ_SYS1_PLL_800M>, <&clk IMX8MQ_SYS1_PLL_800M>; assigned-clock-rates = <600000000>, <800000000>, <400000000>; dcss_disp0: port@0 { reg = <0>; dcss_disp0_mipi_dsi: mipi_dsi { remote-endpoint = <&mipi_dsi_in>; }; }; }; &mipi_dsi_phy { status = "okay"; }; &mipi_dsi { status = "okay"; port@1 { mipi_dsi_in: endpoint { remote-endpoint = <&dcss_disp0_mipi_dsi>; }; }; }; &mipi_dsi_bridge { status = "okay"; panel@0 { compatible = "raydium,rm67191"; reg = <0>; pinctrl-0 = <&pinctrl_mipi_dsi_en>; reset-gpio = <&gpio5 6 GPIO_ACTIVE_HIGH>; dsi-lanes = <4>; panel-width-mm = <68>; panel-height-mm = <121>; display-timings { timing { clock-frequency = <132000000>; hactive = <1080>; vactive = <1920>; hfront-porch = <20>; hsync-len = <2>; hback-porch = <34>; vfront-porch = <10>; vsync-len = <5>; vback-porch = <4>; hsync-active = <0>; vsync-active = <0>; de-active = <0>; pixelclk-active = <0>; }; }; port { panel1_in: endpoint { remote-endpoint = <&mipi_dsi_bridge_out>; }; }; }; port@2 { mipi_dsi_bridge_out: endpoint { remote-endpoint = <&panel1_in>; }; }; }; &iomuxc { imx8mq-evk { pinctrl_mipi_dsi_en: mipi_dsi_en { fsl,pins = < MX8MQ_IOMUXC_ECSPI1_SCLK_GPIO5_IO6 0x16 >; }; }; }; &synaptics_dsx_ts { status = "okay"; };