// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
 * Copyright 2018-2019 Toradex
 */

/dts-v1/;

#include "fsl-imx8qxp-colibri.dtsi"

/ {
	model = "Toradex Colibri iMX8QXP/DX on Aster Board";
	compatible = "toradex,colibri_imx8qxp-aster", \
			"toradex,colibri-imx8qxp", "fsl,imx8qxp";

	display-subsystem {
		status = "okay";
	};

	extcon_usbc_det: usbc_det {
		compatible = "linux,extcon-usb-gpio";
		debounce = <25>;
		id-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usbc_det>;
	};

	gpio-keys {
		compatible = "gpio-keys";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gpiokeys>;

		wakeup {
			label = "Wake-Up";
			gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
			linux,code = <KEY_WAKEUP>;
			debounce-interval = <10>;
			wakeup-source;
		};
	};

	regulators {
		reg_3v3: regulator-3v3 {
			compatible = "regulator-fixed";
			regulator-name = "3.3V";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
		};

		reg_5v0: regulator-5v0 {
			compatible = "regulator-fixed";
			regulator-name = "5V";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
		};

		reg_usbh_vbus: regulator-usbh-vbus {
			compatible = "regulator-fixed";
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_usbh1_reg>;
			regulator-name = "usbh_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio4 3 GPIO_ACTIVE_LOW>;
			regulator-always-on;
		};
	};
};

/* Colibri Analogue Inputs */
&adc0 {
	status = "okay";
};

&atmel_mxt_ts {
	status = "okay";
};

&dpu1 {
	status = "okay";
};

/* Colibri Ethernet */
&fec1 {
	status = "okay";
};

&gpu_3d0 {
	status = "okay";
};

/* Colibri I2C */
&i2c1 {
	status = "okay";
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hog0>, <&pinctrl_hog2>;
};

&imx8_gpu_ss {
	status = "okay";
};

/* Colibri SPI */
&lpspi2 {
	status = "okay";

	spidev0: spidev@0 {
		compatible = "toradex,evalspi";
		reg = <0>;
		spi-max-frequency = <10000000>;
	};
};

/* Colibri UART_B */
&lpuart0 {
	status = "okay";
};

/* Colibri UART_C */
&lpuart2 {
	status = "okay";
};

/* Colibri UART_A */
&lpuart3 {
	status= "okay";
};

/* Colibri PWM_A */
&pwm_adma_lcdif {
	status = "okay";
};

/* Colibri PWM_B */
&pwm0 {
	status = "okay";
};

/* Colibri PWM_C */
&pwm1 {
	status = "okay";
};

/* Colibri PWM_D */
&pwm2 {
	status = "okay";
};

/*
 * Lower USB port, shared with micro-usb-connector
 * The micro-usb connector may only be used in USB client mode.
 */
&usbotg1 {
	extcon = <&extcon_usbc_det &extcon_usbc_det>;
	vbus-supply = <&reg_usbh_vbus>;
	srp-disable;
	hnp-disable;
	adp-disable;
	power-polarity-active-high;
	disable-over-current;
	status = "okay";
};

/* Upper USB port */
&usbotg3 {
	dr_mode = "host";
	status = "okay";
};

/* Colibri SDCard */
&usdhc2 {
	status = "okay";
};

&vpu {
	status = "okay";
};

&vpu_decoder {
	status = "okay";
};

&vpu_encoder {
	status = "okay";
};