/*
 * Copyright 2020 NXP
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/delete-node/ &i2c0_cm40;
/delete-node/ &i2c1;

&i2c_rpbus_1 {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";

	typec_ptn5110: typec@50 {
		compatible = "usb,tcpci";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_typec>;
		reg = <0x50>;
		interrupt-parent = <&gpio1>;
		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
		ss-sel-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
		reset-gpios = <&pca9557_a 7 GPIO_ACTIVE_HIGH>;
		src-pdos = <0x380190c8 0x3803c0c8>;
		port-type = "drp";
		sink-disable;
		default-role = "source";
		status = "okay";
	};
};

&i2c_rpbus_5 {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";

	wm8960: wm8960@1a {
		compatible = "wlf,wm8960";
		reg = <0x1a>;
		clocks = <&clk IMX8QXP_AUD_MCLKOUT0>;
		clock-names = "mclk";
		wlf,shared-lrclk;
		power-domains = <&pd_mclk_out0>;
		assigned-clocks = <&clk IMX8QXP_AUD_PLL0_DIV>,
				<&clk IMX8QXP_AUD_ACM_AUD_PLL_CLK0_DIV>,
				<&clk IMX8QXP_AUD_ACM_AUD_REC_CLK0_DIV>,
				<&clk IMX8QXP_AUD_MCLKOUT0>;
		assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>;
	};

	pca6416: gpio@20 {
		compatible = "ti,tca6416";
		reg = <0x20>;
		gpio-controller;
		#gpio-cells = <2>;
	};

	cs42888: cs42888@48 {
		compatible = "cirrus,cs42888";
		reg = <0x48>;
		clocks = <&clk IMX8QXP_AUD_MCLKOUT0>;
		clock-names = "mclk";
		VA-supply = <&reg_audio>;
		VD-supply = <&reg_audio>;
		VLS-supply = <&reg_audio>;
		VLC-supply = <&reg_audio>;
		reset-gpio = <&pca9557_b 1 1>;
		power-domains = <&pd_mclk_out0>;
		assigned-clocks = <&clk IMX8QXP_AUD_PLL0_DIV>,
				<&clk IMX8QXP_AUD_ACM_AUD_PLL_CLK0_DIV>,
				<&clk IMX8QXP_AUD_ACM_AUD_REC_CLK0_DIV>,
				<&clk IMX8QXP_AUD_MCLKOUT0>;
		assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>;
		fsl,txs-rxm;
		status = "okay";
	};

	ov5640: ov5640@3c {
		compatible = "ovti,ov5640_v3";
		reg = <0x3c>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_parallel_csi>;
		clocks = <&clk IMX8QXP_PARALLEL_CSI_MISC0_CLK>;
		clock-names = "csi_mclk";
		pwn-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
		rst-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
		csi_id = <0>;
		mclk = <24000000>;
		mclk_source = <0>;
		status = "okay";
		port {
			ov5640_ep: endpoint {
				remote-endpoint = <&parallel_csi_ep>;
			};
		};
	};

};

&i2c_rpbus_12 {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";

	max7322: gpio@68 {
		compatible = "maxim,max7322";
		reg = <0x68>;
		gpio-controller;
		#gpio-cells = <2>;
	};
};

&i2c_rpbus_14 {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";

	fxos8700@1e {
		compatible = "fsl,fxos8700";
		reg = <0x1e>;
		interrupt-open-drain;
	};

	fxas2100x@21 {
		compatible = "fsl,fxas2100x";
		reg = <0x21>;
		interrupt-open-drain;
	};

	mpl3115@60 {
		compatible = "fsl,mpl3115";
		reg = <0x60>;
		interrupt-open-drain;
	};
};

&i2c_rpbus_15 {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";

	pca9557_a: gpio@1a {
		compatible = "nxp,pca9557";
		reg = <0x1a>;
		gpio-controller;
		#gpio-cells = <2>;
	};

	pca9557_b: gpio@1d {
		compatible = "nxp,pca9557";
		reg = <0x1d>;
		gpio-controller;
		#gpio-cells = <2>;
	};

	isl29023@44 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_isl29023>;
		compatible = "fsl,isl29023";
		reg = <0x44>;
		rext = <499>;
		interrupt-parent = <&gpio1>;
		interrupts = <2 2>;
	};
};

&rpmsg{
	/*
	 * 64K for one rpmsg instance:
	 */
	vdev-nums = <2>;
	reg = <0x0 0x90000000 0x0 0x20000>;
	status = "okay";
};

&reg_can_en {
	status = "disabled";
};

&reg_can_stby {
	status = "disabled";
};

&intmux_cm40 {
	status = "disabled";
};

&flexcan1 {
	status = "disabled";
};

&flexcan2 {
	status = "disabled";
};

&flexspi0 {
	status = "disabled";
};

&lpuart3 {
	status = "disabled";
};