/* * Copyright 2004 James Cleverdon, IBM. * Subject to the GNU Public License, v.2 * * Flat APIC subarch code. * * Hacked for x86-64 by James Cleverdon from i386 architecture code by * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and * James Cleverdon. */ #include #include #include #include #include #include #include #include #include #include #include #include #include static struct apic apic_physflat; static struct apic apic_flat; struct apic *apic __ro_after_init = &apic_flat; EXPORT_SYMBOL_GPL(apic); static int flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 1; } /* * Set up the logical destination ID. * * Intel recommends to set DFR, LDR and TPR before enabling * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel * document number 292116). So here it goes... */ void flat_init_apic_ldr(void) { unsigned long val; unsigned long num, id; num = smp_processor_id(); id = 1UL << num; apic_write(APIC_DFR, APIC_DFR_FLAT); val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; val |= SET_APIC_LOGICAL_ID(id); apic_write(APIC_LDR, val); } static void _flat_send_IPI_mask(unsigned long mask, int vector) { unsigned long flags; local_irq_save(flags); __default_send_IPI_dest_field(mask, vector, apic->dest_logical); local_irq_restore(flags); } static void flat_send_IPI_mask(const struct cpumask *cpumask, int vector) { unsigned long mask = cpumask_bits(cpumask)[0]; _flat_send_IPI_mask(mask, vector); } static void flat_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector) { unsigned long mask = cpumask_bits(cpumask)[0]; int cpu = smp_processor_id(); if (cpu < BITS_PER_LONG) clear_bit(cpu, &mask); _flat_send_IPI_mask(mask, vector); } static void flat_send_IPI_allbutself(int vector) { int cpu = smp_processor_id(); if (IS_ENABLED(CONFIG_HOTPLUG_CPU) || vector == NMI_VECTOR) { if (!cpumask_equal(cpu_online_mask, cpumask_of(cpu))) { unsigned long mask = cpumask_bits(cpu_online_mask)[0]; if (cpu < BITS_PER_LONG) clear_bit(cpu, &mask); _flat_send_IPI_mask(mask, vector); } } else if (num_online_cpus() > 1) { __default_send_IPI_shortcut(APIC_DEST_ALLBUT, vector, apic->dest_logical); } } static void flat_send_IPI_all(int vector) { if (vector == NMI_VECTOR) { flat_send_IPI_mask(cpu_online_mask, vector); } else { __default_send_IPI_shortcut(APIC_DEST_ALLINC, vector, apic->dest_logical); } } static unsigned int flat_get_apic_id(unsigned long x) { return (x >> 24) & 0xFF; } static u32 set_apic_id(unsigned int id) { return (id & 0xFF) << 24; } static unsigned int read_xapic_id(void) { return flat_get_apic_id(apic_read(APIC_ID)); } static int flat_apic_id_registered(void) { return physid_isset(read_xapic_id(), phys_cpu_present_map); } static int flat_phys_pkg_id(int initial_apic_id, int index_msb) { return initial_apic_id >> index_msb; } static int flat_probe(void) { return 1; } static struct apic apic_flat __ro_after_init = { .name = "flat", .probe = flat_probe, .acpi_madt_oem_check = flat_acpi_madt_oem_check, .apic_id_valid = default_apic_id_valid, .apic_id_registered = flat_apic_id_registered, .irq_delivery_mode = dest_Fixed, .irq_dest_mode = 1, /* logical */ .disable_esr = 0, .dest_logical = APIC_DEST_LOGICAL, .check_apicid_used = NULL, .init_apic_ldr = flat_init_apic_ldr, .ioapic_phys_id_map = NULL, .setup_apic_routing = NULL, .cpu_present_to_apicid = default_cpu_present_to_apicid, .apicid_to_cpu_present = NULL, .check_phys_apicid_present = default_check_phys_apicid_present, .phys_pkg_id = flat_phys_pkg_id, .get_apic_id = flat_get_apic_id, .set_apic_id = set_apic_id, .calc_dest_apicid = apic_flat_calc_apicid, .send_IPI = default_send_IPI_single, .send_IPI_mask = flat_send_IPI_mask, .send_IPI_mask_allbutself = flat_send_IPI_mask_allbutself, .send_IPI_allbutself = flat_send_IPI_allbutself, .send_IPI_all = flat_send_IPI_all, .send_IPI_self = apic_send_IPI_self, .inquire_remote_apic = default_inquire_remote_apic, .read = native_apic_mem_read, .write = native_apic_mem_write, .eoi_write = native_apic_mem_write, .icr_read = native_apic_icr_read, .icr_write = native_apic_icr_write, .wait_icr_idle = native_apic_wait_icr_idle, .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, }; /* * Physflat mode is used when there are more than 8 CPUs on a system. * We cannot use logical delivery in this case because the mask * overflows, so use physical mode. */ static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { #ifdef CONFIG_ACPI /* * Quirk: some x86_64 machines can only use physical APIC mode * regardless of how many processors are present (x86_64 ES7000 * is an example). */ if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID && (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) { printk(KERN_DEBUG "system APIC only can use physical flat"); return 1; } if (!strncmp(oem_id, "IBM", 3) && !strncmp(oem_table_id, "EXA", 3)) { printk(KERN_DEBUG "IBM Summit detected, will use apic physical"); return 1; } #endif return 0; } static void physflat_init_apic_ldr(void) { /* * LDR and DFR are not involved in physflat mode, rather: * "In physical destination mode, the destination processor is * specified by its local APIC ID [...]." (Intel SDM, 10.6.2.1) */ } static void physflat_send_IPI_allbutself(int vector) { default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector); } static void physflat_send_IPI_all(int vector) { default_send_IPI_mask_sequence_phys(cpu_online_mask, vector); } static int physflat_probe(void) { if (apic == &apic_physflat || num_possible_cpus() > 8 || jailhouse_paravirt()) return 1; return 0; } static struct apic apic_physflat __ro_after_init = { .name = "physical flat", .probe = physflat_probe, .acpi_madt_oem_check = physflat_acpi_madt_oem_check, .apic_id_valid = default_apic_id_valid, .apic_id_registered = flat_apic_id_registered, .irq_delivery_mode = dest_Fixed, .irq_dest_mode = 0, /* physical */ .disable_esr = 0, .dest_logical = 0, .check_apicid_used = NULL, .init_apic_ldr = physflat_init_apic_ldr, .ioapic_phys_id_map = NULL, .setup_apic_routing = NULL, .cpu_present_to_apicid = default_cpu_present_to_apicid, .apicid_to_cpu_present = NULL, .check_phys_apicid_present = default_check_phys_apicid_present, .phys_pkg_id = flat_phys_pkg_id, .get_apic_id = flat_get_apic_id, .set_apic_id = set_apic_id, .calc_dest_apicid = apic_default_calc_apicid, .send_IPI = default_send_IPI_single_phys, .send_IPI_mask = default_send_IPI_mask_sequence_phys, .send_IPI_mask_allbutself = default_send_IPI_mask_allbutself_phys, .send_IPI_allbutself = physflat_send_IPI_allbutself, .send_IPI_all = physflat_send_IPI_all, .send_IPI_self = apic_send_IPI_self, .inquire_remote_apic = default_inquire_remote_apic, .read = native_apic_mem_read, .write = native_apic_mem_write, .eoi_write = native_apic_mem_write, .icr_read = native_apic_icr_read, .icr_write = native_apic_icr_write, .wait_icr_idle = native_apic_wait_icr_idle, .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, }; /* * We need to check for physflat first, so this order is important. */ apic_drivers(apic_physflat, apic_flat);