/* * Force feedback support for Holtek On Line Grip based gamepads * * These include at least a Brazilian "Clone Joypad Super Power Fire" * which uses vendor ID 0x1241 and identifies as "HOLTEK On Line Grip". * * Copyright (c) 2011 Anssi Hannula */ /* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include #include #include #include #include "hid-ids.h" #ifdef CONFIG_HOLTEK_FF MODULE_LICENSE("GPL"); MODULE_AUTHOR("Anssi Hannula "); MODULE_DESCRIPTION("Force feedback support for Holtek On Line Grip based devices"); /* * These commands and parameters are currently known: * * byte 0: command id: * 01 set effect parameters * 02 play specified effect * 03 stop specified effect * 04 stop all effects * 06 stop all effects * (the difference between 04 and 06 isn't known; win driver * sends 06,04 on application init, and 06 otherwise) * * Commands 01 and 02 need to be sent as pairs, i.e. you need to send 01 * before each 02. * * The rest of the bytes are parameters. Command 01 takes all of them, and * commands 02,03 take only the effect id. * * byte 1: * bits 0-3: effect id: * 1: very strong rumble * 2: periodic rumble, short intervals * 3: very strong rumble * 4: periodic rumble, long intervals * 5: weak periodic rumble, long intervals * 6: weak periodic rumble, short intervals * 7: periodic rumble, short intervals * 8: strong periodic rumble, short intervals * 9: very strong rumble * a: causes an error * b: very strong periodic rumble, very short intervals * c-f: nothing * bit 6: right (weak) motor enabled * bit 7: left (strong) motor enabled * * bytes 2-3: time in milliseconds, big-endian * bytes 5-6: unknown (win driver seems to use at least 10e0 with effect 1 * and 0014 with effect 6) * byte 7: * bits 0-3: effect magnitude */ #define HOLTEKFF_MSG_LENGTH 7 static const u8 start_effect_1[] = { 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00 }; static const u8 stop_all4[] = { 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; static const u8 stop_all6[] = { 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; struct holtekff_device { struct hid_field *field; }; static void holtekff_send(struct holtekff_device *holtekff, struct hid_device *hid, const u8 data[HOLTEKFF_MSG_LENGTH]) { int i; for (i = 0; i < HOLTEKFF_MSG_LENGTH; i++) { holtekff->field->value[i] = data[i]; } dbg_hid("sending %7ph\n", data); hid_hw_request(hid, holtekff->field->report, HID_REQ_SET_REPORT); } static int holtekff_play(struct input_dev *dev, void *data, struct ff_effect *effect) { struct hid_device *hid = input_get_drvdata(dev); struct holtekff_device *holtekff = data; int left, right; /* effect type 1, length 65535 msec */ u8 buf[HOLTEKFF_MSG_LENGTH] = { 0x01, 0x01, 0xff, 0xff, 0x10, 0xe0, 0x00 }; left = effect->u.rumble.strong_magnitude; right = effect->u.rumble.weak_magnitude; dbg_hid("called with 0x%04x 0x%04x\n", left, right); if (!left && !right) { holtekff_send(holtekff, hid, stop_all6); return 0; } if (left) buf[1] |= 0x80; if (right) buf[1] |= 0x40; /* The device takes a single magnitude, so we just sum them up. */ buf[6] = min(0xf, (left >> 12) + (right >> 12)); holtekff_send(holtekff, hid, buf); holtekff_send(holtekff, hid, start_effect_1); return 0; } static int holtekff_init(struct hid_device *hid) { struct holtekff_device *holtekff; struct hid_report *report; struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list); struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list; struct input_dev *dev = hidinput->input; int error; if (list_empty(report_list)) { hid_err(hid, "no output report found\n"); return -ENODEV; } report = list_entry(report_list->next, struct hid_report, list); if (report->maxfield < 1 || report->field[0]->report_count != 7) { hid_err(hid, "unexpected output report layout\n"); return -ENODEV; } holtekff = kzalloc(sizeof(*holtekff), GFP_KERNEL); if (!holtekff) return -ENOMEM; set_bit(FF_RUMBLE, dev->ffbit); holtekff->field = report->field[0]; /* initialize the same way as win driver does */ holtekff_send(holtekff, hid, stop_all4); holtekff_send(holtekff, hid, stop_all6); error = input_ff_create_memless(dev, holtekff, holtekff_play); if (error) { kfree(holtekff); return error; } hid_info(hid, "Force feedback for Holtek On Line Grip based devices by Anssi Hannula \n"); return 0; } #else static inline int holtekff_init(struct hid_device *hid) { return 0; } #endif static int holtek_probe(struct hid_device *hdev, const struct hid_device_id *id) { int ret; ret = hid_parse(hdev); if (ret) { hid_err(hdev, "parse failed\n"); goto err; } ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF); if (ret) { hid_err(hdev, "hw start failed\n"); goto err; } holtekff_init(hdev); return 0; err: return ret; } static const struct hid_device_id holtek_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK, USB_DEVICE_ID_HOLTEK_ON_LINE_GRIP) }, { } }; MODULE_DEVICE_TABLE(hid, holtek_devices); static struct hid_driver holtek_driver = { .name = "holtek", .id_table = holtek_devices, .probe = holtek_probe, }; module_hid_driver(holtek_driver);