/* * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III * * flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC. * * see flexcop.c for copyright information. */ #include #include "flexcop.h" #include "stv0299.h" #include "mt352.h" #include "nxt200x.h" #include "bcm3510.h" #include "stv0297.h" #include "mt312.h" #include "lgdt330x.h" #include "dvb-pll.h" #include "tuner-simple.h" #include "s5h1420.h" #include "itd1000.h" #include "cx24123.h" #include "cx24113.h" #include "isl6421.h" /* lnb control */ static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) { struct flexcop_device *fc = fe->dvb->priv; flexcop_ibi_value v; deb_tuner("polarity/voltage = %u\n", voltage); v = fc->read_ibi_reg(fc, misc_204); switch (voltage) { case SEC_VOLTAGE_OFF: v.misc_204.ACPI1_sig = 1; break; case SEC_VOLTAGE_13: v.misc_204.ACPI1_sig = 0; v.misc_204.LNB_L_H_sig = 0; break; case SEC_VOLTAGE_18: v.misc_204.ACPI1_sig = 0; v.misc_204.LNB_L_H_sig = 1; break; default: err("unknown SEC_VOLTAGE value"); return -EINVAL; } return fc->write_ibi_reg(fc, misc_204, v); } static int flexcop_sleep(struct dvb_frontend* fe) { struct flexcop_device *fc = fe->dvb->priv; /* flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */ if (fc->fe_sleep) return fc->fe_sleep(fe); /* v.misc_204.ACPI3_sig = 1; fc->write_ibi_reg(fc,misc_204,v);*/ return 0; } static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) { /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */ struct flexcop_device *fc = fe->dvb->priv; flexcop_ibi_value v; u16 ax; v.raw = 0; deb_tuner("tone = %u\n",tone); switch (tone) { case SEC_TONE_ON: ax = 0x01ff; break; case SEC_TONE_OFF: ax = 0; break; default: err("unknown SEC_TONE value"); return -EINVAL; } v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */ v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax; v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax == 0 ? 0x1ff : ax; return fc->write_ibi_reg(fc,lnb_switch_freq_200,v); } static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data) { flexcop_set_tone(fe, SEC_TONE_ON); udelay(data ? 500 : 1000); flexcop_set_tone(fe, SEC_TONE_OFF); udelay(data ? 1000 : 500); } static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data) { int i, par = 1, d; for (i = 7; i >= 0; i--) { d = (data >> i) & 1; par ^= d; flexcop_diseqc_send_bit(fe, d); } flexcop_diseqc_send_bit(fe, par); } static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst) { int i; flexcop_set_tone(fe, SEC_TONE_OFF); mdelay(16); for (i = 0; i < len; i++) flexcop_diseqc_send_byte(fe,msg[i]); mdelay(16); if (burst != -1) { if (burst) flexcop_diseqc_send_byte(fe, 0xff); else { flexcop_set_tone(fe, SEC_TONE_ON); udelay(12500); flexcop_set_tone(fe, SEC_TONE_OFF); } msleep(20); } return 0; } static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) { return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0); } static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) { return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd); } /* dvb-s stv0299 */ static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio) { u8 aclk = 0; u8 bclk = 0; if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; } else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; } else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; } else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; } else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; } else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; } stv0299_writereg (fe, 0x13, aclk); stv0299_writereg (fe, 0x14, bclk); stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff); stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff); stv0299_writereg (fe, 0x21, (ratio ) & 0xf0); return 0; } static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params) { u8 buf[4]; u32 div; struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; struct flexcop_device *fc = fe->dvb->priv; div = params->frequency / 125; buf[0] = (div >> 8) & 0x7f; buf[1] = div & 0xff; buf[2] = 0x84; /* 0xC4 */ buf[3] = 0x08; if (params->frequency < 1500000) buf[3] |= 0x10; if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1) return -EIO; return 0; } static u8 samsung_tbmu24112_inittab[] = { 0x01, 0x15, 0x02, 0x30, 0x03, 0x00, 0x04, 0x7D, 0x05, 0x35, 0x06, 0x02, 0x07, 0x00, 0x08, 0xC3, 0x0C, 0x00, 0x0D, 0x81, 0x0E, 0x23, 0x0F, 0x12, 0x10, 0x7E, 0x11, 0x84, 0x12, 0xB9, 0x13, 0x88, 0x14, 0x89, 0x15, 0xC9, 0x16, 0x00, 0x17, 0x5C, 0x18, 0x00, 0x19, 0x00, 0x1A, 0x00, 0x1C, 0x00, 0x1D, 0x00, 0x1E, 0x00, 0x1F, 0x3A, 0x20, 0x2E, 0x21, 0x80, 0x22, 0xFF, 0x23, 0xC1, 0x28, 0x00, 0x29, 0x1E, 0x2A, 0x14, 0x2B, 0x0F, 0x2C, 0x09, 0x2D, 0x05, 0x31, 0x1F, 0x32, 0x19, 0x33, 0xFE, 0x34, 0x93, 0xff, 0xff, }; static struct stv0299_config samsung_tbmu24112_config = { .demod_address = 0x68, .inittab = samsung_tbmu24112_inittab, .mclk = 88000000UL, .invert = 0, .skip_reinit = 0, .lock_output = STV0299_LOCKOUTPUT_LK, .volt13_op0_op1 = STV0299_VOLT13_OP1, .min_delay_ms = 100, .set_symbol_rate = samsung_tbmu24112_set_symbol_rate, }; /* dvb-t mt352 */ static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe) { static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d }; static u8 mt352_reset [] = { 0x50, 0x80 }; static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 }; static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 }; static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 }; mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); udelay(2000); mt352_write(fe, mt352_reset, sizeof(mt352_reset)); mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg)); return 0; } static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend* fe, struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len) { u32 div; unsigned char bs = 0; if (buf_len < 5) return -EINVAL; #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */ div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6; if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09; if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a; if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08; pllbuf[0] = 0x61; pllbuf[1] = div >> 8; pllbuf[2] = div & 0xff; pllbuf[3] = 0xcc; pllbuf[4] = bs; return 5; } static struct mt352_config samsung_tdtc9251dh0_config = { .demod_address = 0x0f, .demod_init = samsung_tdtc9251dh0_demod_init, }; static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name) { struct flexcop_device *fc = fe->dvb->priv; return request_firmware(fw, name, fc->dev); } static struct lgdt330x_config air2pc_atsc_hd5000_config = { .demod_address = 0x59, .demod_chip = LGDT3303, .serial_mpeg = 0x04, .clock_polarity_flip = 1, }; static struct nxt200x_config samsung_tbmv_config = { .demod_address = 0x0a, }; static struct bcm3510_config air2pc_atsc_first_gen_config = { .demod_address = 0x0f, .request_firmware = flexcop_fe_request_firmware, }; static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params) { u8 buf[4]; u32 div; struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; struct flexcop_device *fc = fe->dvb->priv; div = (params->frequency + (125/2)) / 125; buf[0] = (div >> 8) & 0x7f; buf[1] = (div >> 0) & 0xff; buf[2] = 0x84 | ((div >> 10) & 0x60); buf[3] = 0x80; if (params->frequency < 1550000) buf[3] |= 0x02; if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1) return -EIO; return 0; } static struct mt312_config skystar23_samsung_tbdu18132_config = { .demod_address = 0x0e, }; static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *fep) { struct flexcop_device *fc = fe->dvb->priv; u8 buf[4]; u16 div; int ret; /* 62.5 kHz * 10 */ #define REF_FREQ 625 #define FREQ_OFFSET 36125 div = ((fep->frequency/1000 + FREQ_OFFSET ) * 10) / REF_FREQ; // 4 MHz = 4000 KHz buf[0] = (u8)( div >> 8) & 0x7f; buf[1] = (u8) div & 0xff; /* F(osc) = N * Reference Freq. (62.5 kHz) * byte 2 : 0 N14 N13 N12 N11 N10 N9 N8 * byte 3 : N7 N6 N5 N4 N3 N2 N1 N0 * byte 4 : 1 * * AGD R3 R2 R1 R0 * byte 5 : C1 * RE RTS BS4 BS3 BS2 BS1 * AGD = 1, R3 R2 R1 R0 = 0 1 0 1 => byte 4 = 1**10101 = 0x95 */ buf[2] = 0x95; // Range(MHz) C1 * RE RTS BS4 BS3 BS2 BS1 Byte 5 // 47 - 153 0 * 0 0 0 0 0 1 0x01 // 153 - 430 0 * 0 0 0 0 1 0 0x02 // 430 - 822 0 * 0 0 1 0 0 0 0x08 // 822 - 862 1 * 0 0 1 0 0 0 0x88 if (fep->frequency <= 153000000) buf[3] = 0x01; else if (fep->frequency <= 430000000) buf[3] = 0x02; else if (fep->frequency <= 822000000) buf[3] = 0x08; else buf[3] = 0x88; if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n",fep->frequency, buf[0],buf[1],buf[2],buf[3]); ret = fc->i2c_request(&fc->fc_i2c_adap[2], FC_WRITE, 0x61, buf[0], &buf[1], 3); deb_tuner("tuner write returned: %d\n",ret); return ret; } static u8 alps_tdee4_stv0297_inittab[] = { 0x80, 0x01, 0x80, 0x00, 0x81, 0x01, 0x81, 0x00, 0x00, 0x48, 0x01, 0x58, 0x03, 0x00, 0x04, 0x00, 0x07, 0x00, 0x08, 0x00, 0x30, 0xff, 0x31, 0x9d, 0x32, 0xff, 0x33, 0x00, 0x34, 0x29, 0x35, 0x55, 0x36, 0x80, 0x37, 0x6e, 0x38, 0x9c, 0x40, 0x1a, 0x41, 0xfe, 0x42, 0x33, 0x43, 0x00, 0x44, 0xff, 0x45, 0x00, 0x46, 0x00, 0x49, 0x04, 0x4a, 0x51, 0x4b, 0xf8, 0x52, 0x30, 0x53, 0x06, 0x59, 0x06, 0x5a, 0x5e, 0x5b, 0x04, 0x61, 0x49, 0x62, 0x0a, 0x70, 0xff, 0x71, 0x04, 0x72, 0x00, 0x73, 0x00, 0x74, 0x0c, 0x80, 0x20, 0x81, 0x00, 0x82, 0x30, 0x83, 0x00, 0x84, 0x04, 0x85, 0x22, 0x86, 0x08, 0x87, 0x1b, 0x88, 0x00, 0x89, 0x00, 0x90, 0x00, 0x91, 0x04, 0xa0, 0x86, 0xa1, 0x00, 0xa2, 0x00, 0xb0, 0x91, 0xb1, 0x0b, 0xc0, 0x5b, 0xc1, 0x10, 0xc2, 0x12, 0xd0, 0x02, 0xd1, 0x00, 0xd2, 0x00, 0xd3, 0x00, 0xd4, 0x02, 0xd5, 0x00, 0xde, 0x00, 0xdf, 0x01, 0xff, 0xff, }; static struct stv0297_config alps_tdee4_stv0297_config = { .demod_address = 0x1c, .inittab = alps_tdee4_stv0297_inittab, // .invert = 1, // .pll_set = alps_tdee4_stv0297_pll_set, }; /* SkyStar2 rev2.7 (a/u) */ static struct s5h1420_config skystar2_rev2_7_s5h1420_config = { .demod_address = 0x53, .invert = 1, .repeated_start_workaround = 1, }; static struct itd1000_config skystar2_rev2_7_itd1000_config = { .i2c_address = 0x61, }; /* SkyStar2 rev2.8 */ static struct cx24123_config skystar2_rev2_8_cx24123_config = { .demod_address = 0x55, .dont_use_pll = 1, .agc_callback = cx24113_agc_callback, }; static const struct cx24113_config skystar2_rev2_8_cx24113_config = { .i2c_addr = 0x54, .xtal_khz = 10111, }; /* try to figure out the frontend, each card/box can have on of the following list */ int flexcop_frontend_init(struct flexcop_device *fc) { struct dvb_frontend_ops *ops; struct i2c_adapter *i2c = &fc->fc_i2c_adap[0].i2c_adap; struct i2c_adapter *i2c_tuner; /* enable no_base_addr - no repeated start when reading */ fc->fc_i2c_adap[0].no_base_addr = 1; fc->fe = dvb_attach(s5h1420_attach, &skystar2_rev2_7_s5h1420_config, i2c); if (fc->fe != NULL) { flexcop_ibi_value r108; i2c_tuner = s5h1420_get_tuner_i2c_adapter(fc->fe); ops = &fc->fe->ops; fc->fe_sleep = ops->sleep; ops->sleep = flexcop_sleep; fc->dev_type = FC_SKY_REV27; /* enable no_base_addr - no repeated start when reading */ fc->fc_i2c_adap[2].no_base_addr = 1; if (dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, 0x08, 1, 1) == NULL) err("ISL6421 could NOT be attached"); else info("ISL6421 successfully attached"); /* the ITD1000 requires a lower i2c clock - it slows down the stuff for everyone - but is it a problem ? */ r108.raw = 0x00000506; fc->write_ibi_reg(fc, tw_sm_c_108, r108); if (i2c_tuner) { if (dvb_attach(itd1000_attach, fc->fe, i2c_tuner, &skystar2_rev2_7_itd1000_config) == NULL) err("ITD1000 could NOT be attached"); else info("ITD1000 successfully attached"); } goto fe_found; } fc->fc_i2c_adap[0].no_base_addr = 0; /* for the next devices we need it again */ /* try the sky v2.8 (cx24123, isl6421) */ fc->fe = dvb_attach(cx24123_attach, &skystar2_rev2_8_cx24123_config, i2c); if (fc->fe != NULL) { i2c_tuner = cx24123_get_tuner_i2c_adapter(fc->fe); if (i2c_tuner != NULL) { if (dvb_attach(cx24113_attach, fc->fe, &skystar2_rev2_8_cx24113_config, i2c_tuner) == NULL) err("CX24113 could NOT be attached"); else info("CX24113 successfully attached"); } fc->dev_type = FC_SKY_REV28; fc->fc_i2c_adap[2].no_base_addr = 1; if (dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, 0x08, 0, 0) == NULL) err("ISL6421 could NOT be attached"); else info("ISL6421 successfully attached"); /* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an * IR-receiver (PIC16F818) - but the card has no input for * that ??? */ goto fe_found; } /* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */ fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c); if (fc->fe != NULL) { ops = &fc->fe->ops; ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params; ops->set_voltage = flexcop_set_voltage; fc->fe_sleep = ops->sleep; ops->sleep = flexcop_sleep; fc->dev_type = FC_SKY; goto fe_found; } /* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */ fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c); if (fc->fe != NULL) { fc->dev_type = FC_AIR_DVB; fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs; goto fe_found; } /* try the air atsc 2nd generation (nxt2002) */ fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c); if (fc->fe != NULL) { fc->dev_type = FC_AIR_ATSC2; dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, DVB_PLL_SAMSUNG_TBMV); goto fe_found; } fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c); if (fc->fe != NULL) { fc->dev_type = FC_AIR_ATSC3; dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61, TUNER_LG_TDVS_H06XF); goto fe_found; } /* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */ fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c); if (fc->fe != NULL) { fc->dev_type = FC_AIR_ATSC1; goto fe_found; } /* try the cable dvb (stv0297) */ fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c); if (fc->fe != NULL) { fc->dev_type = FC_CABLE; fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params; goto fe_found; } /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */ fc->fe = dvb_attach(vp310_mt312_attach, &skystar23_samsung_tbdu18132_config, i2c); if (fc->fe != NULL) { ops = &fc->fe->ops; ops->tuner_ops.set_params = skystar23_samsung_tbdu18132_tuner_set_params; ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd; ops->diseqc_send_burst = flexcop_diseqc_send_burst; ops->set_tone = flexcop_set_tone; ops->set_voltage = flexcop_set_voltage; fc->fe_sleep = ops->sleep; ops->sleep = flexcop_sleep; fc->dev_type = FC_SKY_OLD; goto fe_found; } err("no frontend driver found for this B2C2/FlexCop adapter"); return -ENODEV; fe_found: info("found '%s' .", fc->fe->ops.info.name); if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) { err("frontend registration failed!"); ops = &fc->fe->ops; if (ops->release != NULL) ops->release(fc->fe); fc->fe = NULL; return -EINVAL; } fc->init_state |= FC_STATE_FE_INIT; return 0; } void flexcop_frontend_exit(struct flexcop_device *fc) { if (fc->init_state & FC_STATE_FE_INIT) { dvb_unregister_frontend(fc->fe); dvb_frontend_detach(fc->fe); } fc->init_state &= ~FC_STATE_FE_INIT; }