/* * Copyright (c) 2004-2007 Reyk Floeter * Copyright (c) 2006-2007 Nick Kossifidis * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #ifndef _ATH5K_H #define _ATH5K_H /* Set this to 1 to disable regulatory domain restrictions for channel tests. * WARNING: This is for debuging only and has side effects (eg. scan takes too * long and results timeouts). It's also illegal to tune to some of the * supported frequencies in some countries, so use this at your own risk, * you've been warned. */ #define CHAN_DEBUG 0 #include #include #include #include "hw.h" /* PCI IDs */ #define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ #define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */ #define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */ #define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */ #define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */ #define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */ #define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */ #define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */ #define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */ #define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */ #define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */ #define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */ #define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */ #define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */ #define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ #define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ #define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */ #define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */ #define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */ #define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */ #define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */ #define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */ #define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */ #define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */ #define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */ #define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */ #define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */ #define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */ /****************************\ GENERIC DRIVER DEFINITIONS \****************************/ #define ATH5K_PRINTF(fmt, ...) printk("%s: " fmt, __func__, ##__VA_ARGS__) #define ATH5K_PRINTK(_sc, _level, _fmt, ...) \ printk(_level "ath5k %s: " _fmt, \ ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \ ##__VA_ARGS__) #define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \ if (net_ratelimit()) \ ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \ } while (0) #define ATH5K_INFO(_sc, _fmt, ...) \ ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__) #define ATH5K_WARN(_sc, _fmt, ...) \ ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__) #define ATH5K_ERR(_sc, _fmt, ...) \ ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__) /* * Some tuneable values (these should be changeable by the user) */ #define AR5K_TUNE_DMA_BEACON_RESP 2 #define AR5K_TUNE_SW_BEACON_RESP 10 #define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0 #define AR5K_TUNE_RADAR_ALERT false #define AR5K_TUNE_MIN_TX_FIFO_THRES 1 #define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_LEN / 64) + 1) #define AR5K_TUNE_REGISTER_TIMEOUT 20000 /* Register for RSSI threshold has a mask of 0xff, so 255 seems to * be the max value. */ #define AR5K_TUNE_RSSI_THRES 129 /* This must be set when setting the RSSI threshold otherwise it can * prevent a reset. If AR5K_RSSI_THR is read after writing to it * the BMISS_THRES will be seen as 0, seems harware doesn't keep * track of it. Max value depends on harware. For AR5210 this is just 7. * For AR5211+ this seems to be up to 255. */ #define AR5K_TUNE_BMISS_THRES 7 #define AR5K_TUNE_REGISTER_DWELL_TIME 20000 #define AR5K_TUNE_BEACON_INTERVAL 100 #define AR5K_TUNE_AIFS 2 #define AR5K_TUNE_AIFS_11B 2 #define AR5K_TUNE_AIFS_XR 0 #define AR5K_TUNE_CWMIN 15 #define AR5K_TUNE_CWMIN_11B 31 #define AR5K_TUNE_CWMIN_XR 3 #define AR5K_TUNE_CWMAX 1023 #define AR5K_TUNE_CWMAX_11B 1023 #define AR5K_TUNE_CWMAX_XR 7 #define AR5K_TUNE_NOISE_FLOOR -72 #define AR5K_TUNE_MAX_TXPOWER 60 #define AR5K_TUNE_DEFAULT_TXPOWER 30 #define AR5K_TUNE_TPC_TXPOWER true #define AR5K_TUNE_ANT_DIVERSITY true #define AR5K_TUNE_HWTXTRIES 4 /* token to use for aifs, cwmin, cwmax in MadWiFi */ #define AR5K_TXQ_USEDEFAULT ((u32) -1) /* GENERIC CHIPSET DEFINITIONS */ /* MAC Chips */ enum ath5k_version { AR5K_AR5210 = 0, AR5K_AR5211 = 1, AR5K_AR5212 = 2, }; /* PHY Chips */ enum ath5k_radio { AR5K_RF5110 = 0, AR5K_RF5111 = 1, AR5K_RF5112 = 2, AR5K_RF2413 = 3, AR5K_RF5413 = 4, AR5K_RF2425 = 5, }; /* * Common silicon revision/version values */ enum ath5k_srev_type { AR5K_VERSION_VER, AR5K_VERSION_RAD, }; struct ath5k_srev_name { const char *sr_name; enum ath5k_srev_type sr_type; u_int sr_val; }; #define AR5K_SREV_UNKNOWN 0xffff #define AR5K_SREV_VER_AR5210 0x00 #define AR5K_SREV_VER_AR5311 0x10 #define AR5K_SREV_VER_AR5311A 0x20 #define AR5K_SREV_VER_AR5311B 0x30 #define AR5K_SREV_VER_AR5211 0x40 #define AR5K_SREV_VER_AR5212 0x50 #define AR5K_SREV_VER_AR5213 0x55 #define AR5K_SREV_VER_AR5213A 0x59 #define AR5K_SREV_VER_AR2413 0x78 #define AR5K_SREV_VER_AR2414 0x79 #define AR5K_SREV_VER_AR2424 0xa0 /* PCI-E */ #define AR5K_SREV_VER_AR5424 0xa3 /* PCI-E */ #define AR5K_SREV_VER_AR5413 0xa4 #define AR5K_SREV_VER_AR5414 0xa5 #define AR5K_SREV_VER_AR5416 0xc0 /* PCI-E */ #define AR5K_SREV_VER_AR5418 0xca /* PCI-E */ #define AR5K_SREV_VER_AR2425 0xe2 /* PCI-E */ #define AR5K_SREV_RAD_5110 0x00 #define AR5K_SREV_RAD_5111 0x10 #define AR5K_SREV_RAD_5111A 0x15 #define AR5K_SREV_RAD_2111 0x20 #define AR5K_SREV_RAD_5112 0x30 #define AR5K_SREV_RAD_5112A 0x35 #define AR5K_SREV_RAD_2112 0x40 #define AR5K_SREV_RAD_2112A 0x45 #define AR5K_SREV_RAD_SC0 0x56 /* Found on 2413/2414 */ #define AR5K_SREV_RAD_SC1 0x63 /* Found on 5413/5414 */ #define AR5K_SREV_RAD_SC2 0xa2 /* Found on 2424-5/5424 */ #define AR5K_SREV_RAD_5133 0xc0 /* MIMO found on 5418 */ /* IEEE defs */ #define IEEE80211_MAX_LEN 2500 /* TODO add support to mac80211 for vendor-specific rates and modes */ /* * Some of this information is based on Documentation from: * * http://madwifi.org/wiki/ChipsetFeatures/SuperAG * * Modulation for Atheros' eXtended Range - range enhancing extension that is * supposed to double the distance an Atheros client device can keep a * connection with an Atheros access point. This is achieved by increasing * the receiver sensitivity up to, -105dBm, which is about 20dB above what * the 802.11 specifications demand. In addition, new (proprietary) data rates * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s. * * Please note that can you either use XR or TURBO but you cannot use both, * they are exclusive. * */ #define MODULATION_XR 0x00000200 /* * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s * signaling rate achieved through the bonding of two 54Mbit/s 802.11g * channels. To use this feature your Access Point must also suport it. * There is also a distinction between "static" and "dynamic" turbo modes: * * - Static: is the dumb version: devices set to this mode stick to it until * the mode is turned off. * - Dynamic: is the intelligent version, the network decides itself if it * is ok to use turbo. As soon as traffic is detected on adjacent channels * (which would get used in turbo mode), or when a non-turbo station joins * the network, turbo mode won't be used until the situation changes again. * Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which * monitors the used radio band in order to decide whether turbo mode may * be used or not. * * This article claims Super G sticks to bonding of channels 5 and 6 for * USA: * * http://www.pcworld.com/article/id,113428-page,1/article.html * * The channel bonding seems to be driver specific though. In addition to * deciding what channels will be used, these "Turbo" modes are accomplished * by also enabling the following features: * * - Bursting: allows multiple frames to be sent at once, rather than pausing * after each frame. Bursting is a standards-compliant feature that can be * used with any Access Point. * - Fast frames: increases the amount of information that can be sent per * frame, also resulting in a reduction of transmission overhead. It is a * proprietary feature that needs to be supported by the Access Point. * - Compression: data frames are compressed in real time using a Lempel Ziv * algorithm. This is done transparently. Once this feature is enabled, * compression and decompression takes place inside the chipset, without * putting additional load on the host CPU. * */ #define MODULATION_TURBO 0x00000080 enum ath5k_driver_mode { AR5K_MODE_11A = 0, AR5K_MODE_11A_TURBO = 1, AR5K_MODE_11B = 2, AR5K_MODE_11G = 3, AR5K_MODE_11G_TURBO = 4, AR5K_MODE_XR = 0, AR5K_MODE_MAX = 5 }; /* adding this flag to rate_code enables short preamble, see ar5212_reg.h */ #define AR5K_SET_SHORT_PREAMBLE 0x04 #define HAS_SHPREAMBLE(_ix) \ (rt->rates[_ix].modulation == IEEE80211_RATE_SHORT_PREAMBLE) #define SHPREAMBLE_FLAG(_ix) \ (HAS_SHPREAMBLE(_ix) ? AR5K_SET_SHORT_PREAMBLE : 0) /****************\ TX DEFINITIONS \****************/ /* * TX Status */ struct ath5k_tx_status { u16 ts_seqnum; u16 ts_tstamp; u8 ts_status; u8 ts_rate; s8 ts_rssi; u8 ts_shortretry; u8 ts_longretry; u8 ts_virtcol; u8 ts_antenna; }; #define AR5K_TXSTAT_ALTRATE 0x80 #define AR5K_TXERR_XRETRY 0x01 #define AR5K_TXERR_FILT 0x02 #define AR5K_TXERR_FIFO 0x04 /** * enum ath5k_tx_queue - Queue types used to classify tx queues. * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue * @AR5K_TX_QUEUE_DATA: A normal data queue * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue * @AR5K_TX_QUEUE_BEACON: The beacon queue * @AR5K_TX_QUEUE_CAB: The after-beacon queue * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue */ enum ath5k_tx_queue { AR5K_TX_QUEUE_INACTIVE = 0, AR5K_TX_QUEUE_DATA, AR5K_TX_QUEUE_XR_DATA, AR5K_TX_QUEUE_BEACON, AR5K_TX_QUEUE_CAB, AR5K_TX_QUEUE_UAPSD, }; #define AR5K_NUM_TX_QUEUES 10 #define AR5K_NUM_TX_QUEUES_NOQCU 2 /* * Queue syb-types to classify normal data queues. * These are the 4 Access Categories as defined in * WME spec. 0 is the lowest priority and 4 is the * highest. Normal data that hasn't been classified * goes to the Best Effort AC. */ enum ath5k_tx_queue_subtype { AR5K_WME_AC_BK = 0, /*Background traffic*/ AR5K_WME_AC_BE, /*Best-effort (normal) traffic)*/ AR5K_WME_AC_VI, /*Video traffic*/ AR5K_WME_AC_VO, /*Voice traffic*/ }; /* * Queue ID numbers as returned by the hw functions, each number * represents a hw queue. If hw does not support hw queues * (eg 5210) all data goes in one queue. These match * d80211 definitions (net80211/MadWiFi don't use them). */ enum ath5k_tx_queue_id { AR5K_TX_QUEUE_ID_NOQCU_DATA = 0, AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1, AR5K_TX_QUEUE_ID_DATA_MIN = 0, /*IEEE80211_TX_QUEUE_DATA0*/ AR5K_TX_QUEUE_ID_DATA_MAX = 4, /*IEEE80211_TX_QUEUE_DATA4*/ AR5K_TX_QUEUE_ID_DATA_SVP = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/ AR5K_TX_QUEUE_ID_CAB = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/ AR5K_TX_QUEUE_ID_BEACON = 7, /*IEEE80211_TX_QUEUE_BEACON*/ AR5K_TX_QUEUE_ID_UAPSD = 8, AR5K_TX_QUEUE_ID_XR_DATA = 9, }; /* * Flags to set hw queue's parameters... */ #define AR5K_TXQ_FLAG_TXOKINT_ENABLE 0x0001 /* Enable TXOK interrupt */ #define AR5K_TXQ_FLAG_TXERRINT_ENABLE 0x0002 /* Enable TXERR interrupt */ #define AR5K_TXQ_FLAG_TXEOLINT_ENABLE 0x0004 /* Enable TXEOL interrupt -not used- */ #define AR5K_TXQ_FLAG_TXDESCINT_ENABLE 0x0008 /* Enable TXDESC interrupt -not used- */ #define AR5K_TXQ_FLAG_TXURNINT_ENABLE 0x0010 /* Enable TXURN interrupt */ #define AR5K_TXQ_FLAG_BACKOFF_DISABLE 0x0020 /* Disable random post-backoff */ #define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0040 /* Enable ready time expiry policy (?)*/ #define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0080 /* Enable backoff while bursting */ #define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x0100 /* Disable backoff while bursting */ #define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x0200 /* Enable hw compression -not implemented-*/ /* * A struct to hold tx queue's parameters */ struct ath5k_txq_info { enum ath5k_tx_queue tqi_type; enum ath5k_tx_queue_subtype tqi_subtype; u16 tqi_flags; /* Tx queue flags (see above) */ u32 tqi_aifs; /* Arbitrated Interframe Space */ s32 tqi_cw_min; /* Minimum Contention Window */ s32 tqi_cw_max; /* Maximum Contention Window */ u32 tqi_cbr_period; /* Constant bit rate period */ u32 tqi_cbr_overflow_limit; u32 tqi_burst_time; u32 tqi_ready_time; /* Not used */ }; /* * Transmit packet types. * These are not fully used inside OpenHAL yet */ enum ath5k_pkt_type { AR5K_PKT_TYPE_NORMAL = 0, AR5K_PKT_TYPE_ATIM = 1, AR5K_PKT_TYPE_PSPOLL = 2, AR5K_PKT_TYPE_BEACON = 3, AR5K_PKT_TYPE_PROBE_RESP = 4, AR5K_PKT_TYPE_PIFS = 5, }; /* * TX power and TPC settings */ #define AR5K_TXPOWER_OFDM(_r, _v) ( \ ((0 & 1) << ((_v) + 6)) | \ (((ah->ah_txpower.txp_rates[(_r)]) & 0x3f) << (_v)) \ ) #define AR5K_TXPOWER_CCK(_r, _v) ( \ (ah->ah_txpower.txp_rates[(_r)] & 0x3f) << (_v) \ ) /* * DMA size definitions (2^n+2) */ enum ath5k_dmasize { AR5K_DMASIZE_4B = 0, AR5K_DMASIZE_8B, AR5K_DMASIZE_16B, AR5K_DMASIZE_32B, AR5K_DMASIZE_64B, AR5K_DMASIZE_128B, AR5K_DMASIZE_256B, AR5K_DMASIZE_512B }; /****************\ RX DEFINITIONS \****************/ /* * RX Status */ struct ath5k_rx_status { u16 rs_datalen; u16 rs_tstamp; u8 rs_status; u8 rs_phyerr; s8 rs_rssi; u8 rs_keyix; u8 rs_rate; u8 rs_antenna; u8 rs_more; }; #define AR5K_RXERR_CRC 0x01 #define AR5K_RXERR_PHY 0x02 #define AR5K_RXERR_FIFO 0x04 #define AR5K_RXERR_DECRYPT 0x08 #define AR5K_RXERR_MIC 0x10 #define AR5K_RXKEYIX_INVALID ((u8) - 1) #define AR5K_TXKEYIX_INVALID ((u32) - 1) /**************************\ BEACON TIMERS DEFINITIONS \**************************/ #define AR5K_BEACON_PERIOD 0x0000ffff #define AR5K_BEACON_ENA 0x00800000 /*enable beacon xmit*/ #define AR5K_BEACON_RESET_TSF 0x01000000 /*force a TSF reset*/ #if 0 /** * struct ath5k_beacon_state - Per-station beacon timer state. * @bs_interval: in TU's, can also include the above flags * @bs_cfp_max_duration: if non-zero hw is setup to coexist with a * Point Coordination Function capable AP */ struct ath5k_beacon_state { u32 bs_next_beacon; u32 bs_next_dtim; u32 bs_interval; u8 bs_dtim_period; u8 bs_cfp_period; u16 bs_cfp_max_duration; u16 bs_cfp_du_remain; u16 bs_tim_offset; u16 bs_sleep_duration; u16 bs_bmiss_threshold; u32 bs_cfp_next; }; #endif /* * TSF to TU conversion: * * TSF is a 64bit value in usec (microseconds). * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024). */ #define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10) /********************\ COMMON DEFINITIONS \********************/ /* * Atheros hardware descriptor * This is read and written to by the hardware */ struct ath5k_desc { u32 ds_link; /* physical address of the next descriptor */ u32 ds_data; /* physical address of data buffer (skb) */ union { struct ath5k_hw_5210_tx_desc ds_tx5210; struct ath5k_hw_5212_tx_desc ds_tx5212; struct ath5k_hw_all_rx_desc ds_rx; } ud; } __packed; #define AR5K_RXDESC_INTREQ 0x0020 #define AR5K_TXDESC_CLRDMASK 0x0001 #define AR5K_TXDESC_NOACK 0x0002 /*[5211+]*/ #define AR5K_TXDESC_RTSENA 0x0004 #define AR5K_TXDESC_CTSENA 0x0008 #define AR5K_TXDESC_INTREQ 0x0010 #define AR5K_TXDESC_VEOL 0x0020 /*[5211+]*/ #define AR5K_SLOT_TIME_9 396 #define AR5K_SLOT_TIME_20 880 #define AR5K_SLOT_TIME_MAX 0xffff /* channel_flags */ #define CHANNEL_CW_INT 0x0008 /* Contention Window interference detected */ #define CHANNEL_TURBO 0x0010 /* Turbo Channel */ #define CHANNEL_CCK 0x0020 /* CCK channel */ #define CHANNEL_OFDM 0x0040 /* OFDM channel */ #define CHANNEL_2GHZ 0x0080 /* 2GHz channel. */ #define CHANNEL_5GHZ 0x0100 /* 5GHz channel */ #define CHANNEL_PASSIVE 0x0200 /* Only passive scan allowed */ #define CHANNEL_DYN 0x0400 /* Dynamic CCK-OFDM channel (for g operation) */ #define CHANNEL_XR 0x0800 /* XR channel */ #define CHANNEL_A (CHANNEL_5GHZ|CHANNEL_OFDM) #define CHANNEL_B (CHANNEL_2GHZ|CHANNEL_CCK) #define CHANNEL_G (CHANNEL_2GHZ|CHANNEL_OFDM) #define CHANNEL_T (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO) #define CHANNEL_TG (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO) #define CHANNEL_108A CHANNEL_T #define CHANNEL_108G CHANNEL_TG #define CHANNEL_X (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR) #define CHANNEL_ALL (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \ CHANNEL_TURBO) #define CHANNEL_ALL_NOTURBO (CHANNEL_ALL & ~CHANNEL_TURBO) #define CHANNEL_MODES CHANNEL_ALL /* * Used internaly in OpenHAL (ar5211.c/ar5212.c * for reset_tx_queue). Also see struct struct ieee80211_channel. */ #define IS_CHAN_XR(_c) ((_c.hw_value & CHANNEL_XR) != 0) #define IS_CHAN_B(_c) ((_c.hw_value & CHANNEL_B) != 0) /* * The following structure will be used to map 2GHz channels to * 5GHz Atheros channels. */ struct ath5k_athchan_2ghz { u32 a2_flags; u16 a2_athchan; }; /* * Rate definitions * TODO: Clean them up or move them on mac80211 -most of these infos are * used by the rate control algorytm on MadWiFi. */ /* Max number of rates on the rate table and what it seems * Atheros hardware supports */ #define AR5K_MAX_RATES 32 /** * struct ath5k_rate - rate structure * @valid: is this a valid rate for rate control (remove) * @modulation: respective mac80211 modulation * @rate_kbps: rate in kbit/s * @rate_code: hardware rate value, used in &struct ath5k_desc, on RX on * &struct ath5k_rx_status.rs_rate and on TX on * &struct ath5k_tx_status.ts_rate. Seems the ar5xxx harware supports * up to 32 rates, indexed by 1-32. This means we really only need * 6 bits for the rate_code. * @dot11_rate: respective IEEE-802.11 rate value * @control_rate: index of rate assumed to be used to send control frames. * This can be used to set override the value on the rate duration * registers. This is only useful if we can override in the harware at * what rate we want to send control frames at. Note that IEEE-802.11 * Ch. 9.6 (after IEEE 802.11g changes) defines the rate at which we * should send ACK/CTS, if we change this value we can be breaking * the spec. * * This structure is used to get the RX rate or set the TX rate on the * hardware descriptors. It is also used for internal modulation control * and settings. * * On RX after the &struct ath5k_desc is parsed by the appropriate * ah_proc_rx_desc() the respective hardware rate value is set in * &struct ath5k_rx_status.rs_rate. On TX the desired rate is set in * &struct ath5k_tx_status.ts_rate which is later used to setup the * &struct ath5k_desc correctly. This is the hardware rate map we are * aware of: * * rate_code 1 2 3 4 5 6 7 8 * rate_kbps 3000 1000 ? ? ? 2000 500 48000 * * rate_code 9 10 11 12 13 14 15 16 * rate_kbps 24000 12000 6000 54000 36000 18000 9000 ? * * rate_code 17 18 19 20 21 22 23 24 * rate_kbps ? ? ? ? ? ? ? 11000 * * rate_code 25 26 27 28 29 30 31 32 * rate_kbps 5500 2000 1000 ? ? ? ? ? * */ struct ath5k_rate { u8 valid; u32 modulation; u16 rate_kbps; u8 rate_code; u8 dot11_rate; u8 control_rate; }; /* XXX: GRR all this stuff to get leds blinking ??? (check out setcurmode) */ struct ath5k_rate_table { u16 rate_count; u8 rate_code_to_index[AR5K_MAX_RATES]; /* Back-mapping */ struct ath5k_rate rates[AR5K_MAX_RATES]; }; /* * Rate tables... * TODO: CLEAN THIS !!! */ #define AR5K_RATES_11A { 8, { \ 255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0, \ 7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255, \ 255, 255, 255, 255, 255, 255, 255, 255 }, { \ { 1, 0, 6000, 11, 140, 0 }, \ { 1, 0, 9000, 15, 18, 0 }, \ { 1, 0, 12000, 10, 152, 2 }, \ { 1, 0, 18000, 14, 36, 2 }, \ { 1, 0, 24000, 9, 176, 4 }, \ { 1, 0, 36000, 13, 72, 4 }, \ { 1, 0, 48000, 8, 96, 4 }, \ { 1, 0, 54000, 12, 108, 4 } } \ } #define AR5K_RATES_11B { 4, { \ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \ 3, 2, 1, 0, 255, 255, 255, 255 }, { \ { 1, 0, 1000, 27, 130, 0 }, \ { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 132, 1 }, \ { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 139, 1 }, \ { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 150, 1 } } \ } #define AR5K_RATES_11G { 12, { \ 255, 255, 255, 255, 255, 255, 255, 255, 10, 8, 6, 4, \ 11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255, \ 3, 2, 1, 0, 255, 255, 255, 255 }, { \ { 1, 0, 1000, 27, 2, 0 }, \ { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 4, 1 }, \ { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 11, 1 }, \ { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 22, 1 }, \ { 0, 0, 6000, 11, 12, 4 }, \ { 0, 0, 9000, 15, 18, 4 }, \ { 1, 0, 12000, 10, 24, 6 }, \ { 1, 0, 18000, 14, 36, 6 }, \ { 1, 0, 24000, 9, 48, 8 }, \ { 1, 0, 36000, 13, 72, 8 }, \ { 1, 0, 48000, 8, 96, 8 }, \ { 1, 0, 54000, 12, 108, 8 } } \ } #define AR5K_RATES_TURBO { 8, { \ 255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0, \ 7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255, \ 255, 255, 255, 255, 255, 255, 255, 255 }, { \ { 1, MODULATION_TURBO, 6000, 11, 140, 0 }, \ { 1, MODULATION_TURBO, 9000, 15, 18, 0 }, \ { 1, MODULATION_TURBO, 12000, 10, 152, 2 }, \ { 1, MODULATION_TURBO, 18000, 14, 36, 2 }, \ { 1, MODULATION_TURBO, 24000, 9, 176, 4 }, \ { 1, MODULATION_TURBO, 36000, 13, 72, 4 }, \ { 1, MODULATION_TURBO, 48000, 8, 96, 4 }, \ { 1, MODULATION_TURBO, 54000, 12, 108, 4 } } \ } #define AR5K_RATES_XR { 12, { \ 255, 3, 1, 255, 255, 255, 2, 0, 10, 8, 6, 4, \ 11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255, \ 255, 255, 255, 255, 255, 255, 255, 255 }, { \ { 1, MODULATION_XR, 500, 7, 129, 0 }, \ { 1, MODULATION_XR, 1000, 2, 139, 1 }, \ { 1, MODULATION_XR, 2000, 6, 150, 2 }, \ { 1, MODULATION_XR, 3000, 1, 150, 3 }, \ { 1, 0, 6000, 11, 140, 4 }, \ { 1, 0, 9000, 15, 18, 4 }, \ { 1, 0, 12000, 10, 152, 6 }, \ { 1, 0, 18000, 14, 36, 6 }, \ { 1, 0, 24000, 9, 176, 8 }, \ { 1, 0, 36000, 13, 72, 8 }, \ { 1, 0, 48000, 8, 96, 8 }, \ { 1, 0, 54000, 12, 108, 8 } } \ } /* * Crypto definitions */ #define AR5K_KEYCACHE_SIZE 8 /***********************\ HW RELATED DEFINITIONS \***********************/ /* * Misc definitions */ #define AR5K_RSSI_EP_MULTIPLIER (1<<7) #define AR5K_ASSERT_ENTRY(_e, _s) do { \ if (_e >= _s) \ return (false); \ } while (0) enum ath5k_ant_setting { AR5K_ANT_VARIABLE = 0, /* variable by programming */ AR5K_ANT_FIXED_A = 1, /* fixed to 11a frequencies */ AR5K_ANT_FIXED_B = 2, /* fixed to 11b frequencies */ AR5K_ANT_MAX = 3, }; /* * Hardware interrupt abstraction */ /** * enum ath5k_int - Hardware interrupt masks helpers * * @AR5K_INT_RX: mask to identify received frame interrupts, of type * AR5K_ISR_RXOK or AR5K_ISR_RXERR * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?) * @AR5K_INT_RXNOFRM: No frame received (?) * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The * Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's * LinkPtr is NULL. For more details, refer to: * http://www.freepatentsonline.com/20030225739.html * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors). * Note that Rx overrun is not always fatal, on some chips we can continue * operation without reseting the card, that's why int_fatal is not * common for all chips. * @AR5K_INT_TX: mask to identify received frame interrupts, of type * AR5K_ISR_TXOK or AR5K_ISR_TXERR * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?) * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold * We currently do increments on interrupt by * (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2 * @AR5K_INT_MIB: Indicates the Management Information Base counters should be * checked. We should do this with ath5k_hw_update_mib_counters() but * it seems we should also then do some noise immunity work. * @AR5K_INT_RXPHY: RX PHY Error * @AR5K_INT_RXKCM: ?? * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a * beacon that must be handled in software. The alternative is if you * have VEOL support, in that case you let the hardware deal with things. * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing * beacons from the AP have associated with, we should probably try to * reassociate. When in IBSS mode this might mean we have not received * any beacons from any local stations. Note that every station in an * IBSS schedules to send beacons at the Target Beacon Transmission Time * (TBTT) with a random backoff. * @AR5K_INT_BNR: Beacon Not Ready interrupt - ?? * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now * until properly handled * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA * errors. These types of errors we can enable seem to be of type * AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR. * @AR5K_INT_GLOBAL: Seems to be used to clear and set the IER * @AR5K_INT_NOCARD: signals the card has been removed * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same * bit value * * These are mapped to take advantage of some common bits * between the MACs, to be able to set intr properties * easier. Some of them are not used yet inside hw.c. Most map * to the respective hw interrupt value as they are common amogst different * MACs. */ enum ath5k_int { AR5K_INT_RX = 0x00000001, /* Not common */ AR5K_INT_RXDESC = 0x00000002, AR5K_INT_RXNOFRM = 0x00000008, AR5K_INT_RXEOL = 0x00000010, AR5K_INT_RXORN = 0x00000020, AR5K_INT_TX = 0x00000040, /* Not common */ AR5K_INT_TXDESC = 0x00000080, AR5K_INT_TXURN = 0x00000800, AR5K_INT_MIB = 0x00001000, AR5K_INT_RXPHY = 0x00004000, AR5K_INT_RXKCM = 0x00008000, AR5K_INT_SWBA = 0x00010000, AR5K_INT_BMISS = 0x00040000, AR5K_INT_BNR = 0x00100000, /* Not common */ AR5K_INT_GPIO = 0x01000000, AR5K_INT_FATAL = 0x40000000, /* Not common */ AR5K_INT_GLOBAL = 0x80000000, AR5K_INT_COMMON = AR5K_INT_RXNOFRM | AR5K_INT_RXDESC | AR5K_INT_RXEOL | AR5K_INT_RXORN | AR5K_INT_TXURN | AR5K_INT_TXDESC | AR5K_INT_MIB | AR5K_INT_RXPHY | AR5K_INT_RXKCM | AR5K_INT_SWBA | AR5K_INT_BMISS | AR5K_INT_GPIO, AR5K_INT_NOCARD = 0xffffffff }; /* * Power management */ enum ath5k_power_mode { AR5K_PM_UNDEFINED = 0, AR5K_PM_AUTO, AR5K_PM_AWAKE, AR5K_PM_FULL_SLEEP, AR5K_PM_NETWORK_SLEEP, }; /* * These match net80211 definitions (not used in * d80211). */ #define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/ #define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/ #define AR5K_LED_AUTH 2 /*IEEE80211_S_AUTH*/ #define AR5K_LED_ASSOC 3 /*IEEE80211_S_ASSOC*/ #define AR5K_LED_RUN 4 /*IEEE80211_S_RUN*/ /* GPIO-controlled software LED */ #define AR5K_SOFTLED_PIN 0 #define AR5K_SOFTLED_ON 0 #define AR5K_SOFTLED_OFF 1 /* * Chipset capabilities -see ath5k_hw_get_capability- * get_capability function is not yet fully implemented * in OpenHAL so most of these don't work yet... */ enum ath5k_capability_type { AR5K_CAP_REG_DMN = 0, /* Used to get current reg. domain id */ AR5K_CAP_TKIP_MIC = 2, /* Can handle TKIP MIC in hardware */ AR5K_CAP_TKIP_SPLIT = 3, /* TKIP uses split keys */ AR5K_CAP_PHYCOUNTERS = 4, /* PHY error counters */ AR5K_CAP_DIVERSITY = 5, /* Supports fast diversity */ AR5K_CAP_NUM_TXQUEUES = 6, /* Used to get max number of hw txqueues */ AR5K_CAP_VEOL = 7, /* Supports virtual EOL */ AR5K_CAP_COMPRESSION = 8, /* Supports compression */ AR5K_CAP_BURST = 9, /* Supports packet bursting */ AR5K_CAP_FASTFRAME = 10, /* Supports fast frames */ AR5K_CAP_TXPOW = 11, /* Used to get global tx power limit */ AR5K_CAP_TPC = 12, /* Can do per-packet tx power control (needed for 802.11a) */ AR5K_CAP_BSSIDMASK = 13, /* Supports bssid mask */ AR5K_CAP_MCAST_KEYSRCH = 14, /* Supports multicast key search */ AR5K_CAP_TSF_ADJUST = 15, /* Supports beacon tsf adjust */ AR5K_CAP_XR = 16, /* Supports XR mode */ AR5K_CAP_WME_TKIPMIC = 17, /* Supports TKIP MIC when using WMM */ AR5K_CAP_CHAN_HALFRATE = 18, /* Supports half rate channels */ AR5K_CAP_CHAN_QUARTERRATE = 19, /* Supports quarter rate channels */ AR5K_CAP_RFSILENT = 20, /* Supports RFsilent */ }; /* XXX: we *may* move cap_range stuff to struct wiphy */ struct ath5k_capabilities { /* * Supported PHY modes * (ie. CHANNEL_A, CHANNEL_B, ...) */ DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX); /* * Frequency range (without regulation restrictions) */ struct { u16 range_2ghz_min; u16 range_2ghz_max; u16 range_5ghz_min; u16 range_5ghz_max; } cap_range; /* * Values stored in the EEPROM (some of them...) */ struct ath5k_eeprom_info cap_eeprom; /* * Queue information */ struct { u8 q_tx_num; } cap_queues; }; /***************************************\ HARDWARE ABSTRACTION LAYER STRUCTURE \***************************************/ /* * Misc defines */ #define AR5K_MAX_GPIO 10 #define AR5K_MAX_RF_BANKS 8 struct ath5k_hw { u32 ah_magic; struct ath5k_softc *ah_sc; void __iomem *ah_iobase; enum ath5k_int ah_imr; enum ieee80211_if_types ah_op_mode; enum ath5k_power_mode ah_power_mode; struct ieee80211_channel ah_current_channel; bool ah_turbo; bool ah_calibration; bool ah_running; bool ah_single_chip; enum ath5k_rfgain ah_rf_gain; u32 ah_mac_srev; u16 ah_mac_version; u16 ah_mac_revision; u16 ah_phy_revision; u16 ah_radio_5ghz_revision; u16 ah_radio_2ghz_revision; u32 ah_phy_spending; enum ath5k_version ah_version; enum ath5k_radio ah_radio; u32 ah_phy; bool ah_5ghz; bool ah_2ghz; #define ah_regdomain ah_capabilities.cap_regdomain.reg_current #define ah_regdomain_hw ah_capabilities.cap_regdomain.reg_hw #define ah_modes ah_capabilities.cap_mode #define ah_ee_version ah_capabilities.cap_eeprom.ee_version u32 ah_atim_window; u32 ah_aifs; u32 ah_cw_min; u32 ah_cw_max; bool ah_software_retry; u32 ah_limit_tx_retries; u32 ah_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; bool ah_ant_diversity; u8 ah_sta_id[ETH_ALEN]; /* Current BSSID we are trying to assoc to / creating. * This is passed by mac80211 on config_interface() and cached here for * use in resets */ u8 ah_bssid[ETH_ALEN]; u32 ah_gpio[AR5K_MAX_GPIO]; int ah_gpio_npins; struct ath5k_capabilities ah_capabilities; struct ath5k_txq_info ah_txq[AR5K_NUM_TX_QUEUES]; u32 ah_txq_status; u32 ah_txq_imr_txok; u32 ah_txq_imr_txerr; u32 ah_txq_imr_txurn; u32 ah_txq_imr_txdesc; u32 ah_txq_imr_txeol; u32 *ah_rf_banks; size_t ah_rf_banks_size; struct ath5k_gain ah_gain; u32 ah_offset[AR5K_MAX_RF_BANKS]; struct { u16 txp_pcdac[AR5K_EEPROM_POWER_TABLE_SIZE]; u16 txp_rates[AR5K_MAX_RATES]; s16 txp_min; s16 txp_max; bool txp_tpc; s16 txp_ofdm; } ah_txpower; struct { bool r_enabled; int r_last_alert; struct ieee80211_channel r_last_channel; } ah_radar; /* noise floor from last periodic calibration */ s32 ah_noise_floor; /* * Function pointers */ int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int); int (*ah_setup_xtx_desc)(struct ath5k_hw *, struct ath5k_desc *, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int); int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, struct ath5k_tx_status *); int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *, struct ath5k_rx_status *); }; /* * Prototypes */ /* General Functions */ extern int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, bool is_set); /* Attach/Detach Functions */ extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version); extern const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah, unsigned int mode); extern void ath5k_hw_detach(struct ath5k_hw *ah); /* Reset Functions */ extern int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, struct ieee80211_channel *channel, bool change_channel); /* Power management functions */ extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration); /* DMA Related Functions */ extern void ath5k_hw_start_rx(struct ath5k_hw *ah); extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah); extern u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah); extern void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr); extern int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue); extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue); extern u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue); extern int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr); extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase); /* Interrupt handling */ extern bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah); extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask); extern enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask); extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ieee80211_low_level_stats *stats); /* EEPROM access functions */ extern int ath5k_hw_set_regdomain(struct ath5k_hw *ah, u16 regdomain); /* Protocol Control Unit Functions */ extern int ath5k_hw_set_opmode(struct ath5k_hw *ah); /* BSSID Functions */ extern void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac); extern int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac); extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id); extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask); /* Receive start/stop functions */ extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); extern void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah); /* RX Filter functions */ extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1); extern int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index); extern int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index); extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah); extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter); /* Beacon related functions */ extern u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah); extern u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah); extern void ath5k_hw_reset_tsf(struct ath5k_hw *ah); extern void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval); #if 0 extern int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, const struct ath5k_beacon_state *state); extern void ath5k_hw_reset_beacon(struct ath5k_hw *ah); extern int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr); #endif /* ACK bit rate */ void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high); /* ACK/CTS Timeouts */ extern int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout); extern unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah); extern int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout); extern unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah); /* Key table (WEP) functions */ extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry); extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry); extern int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, const struct ieee80211_key_conf *key, const u8 *mac); extern int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac); /* Queue Control Unit, DFS Control Unit Functions */ extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, struct ath5k_txq_info *queue_info); extern int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue, const struct ath5k_txq_info *queue_info); extern int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info); extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue); extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue); extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue); extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time); extern unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah); /* Hardware Descriptor Functions */ extern int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, u32 size, unsigned int flags); /* GPIO Functions */ extern void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state); extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio); extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio); extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio); extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val); extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level); /* Misc functions */ extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result); /* Initial register settings functions */ extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel); /* Initialize RF */ extern int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int mode); extern int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq); extern enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah); extern int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah); /* PHY/RF channel functions */ extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags); extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel); /* PHY calibration */ extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel); extern int ath5k_hw_phy_disable(struct ath5k_hw *ah); /* Misc PHY functions */ extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan); extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant); extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah); extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq); /* TX power setup */ extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int txpower); extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power); static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) { return ioread32(ah->ah_iobase + reg); } static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) { iowrite32(val, ah->ah_iobase + reg); } #endif