/****************************************************************************** * * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA * * ******************************************************************************/ #define CONFIG_ODM_REFRESH_RAMASK #define CONFIG_PHY_SETTING_WITH_ODM /* * Automatically generated C config: don't edit */ #define AUTOCONF_INCLUDED #define RTL871X_MODULE_NAME "8723AS" #define DRV_NAME "rtl8723as" #define CONFIG_RTL8723A #define CONFIG_SDIO_HCI #define PLATFORM_LINUX #define CONFIG_EMBEDDED_FWIMG //#define CONFIG_FILE_FWIMG /* * Functions Config */ #define CONFIG_XMIT_ACK #ifdef CONFIG_XMIT_ACK #define CONFIG_ACTIVE_KEEP_ALIVE_CHECK #endif #define CONFIG_80211N_HT #define CONFIG_RECV_REORDERING_CTRL //#define CONFIG_IOCTL_CFG80211 #ifdef CONFIG_IOCTL_CFG80211 //#define RTW_USE_CFG80211_STA_EVENT /* Indecate new sta asoc through cfg80211_new_sta */ #define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER //#define CONFIG_DEBUG_CFG80211 #define CONFIG_SET_SCAN_DENY_TIMER #endif #define CONFIG_AP_MODE #ifdef CONFIG_AP_MODE #define CONFIG_NATIVEAP_MLME #ifndef CONFIG_NATIVEAP_MLME #define CONFIG_HOSTAPD_MLME #endif //#define CONFIG_FIND_BEST_CHANNEL //#define CONFIG_NO_WIRELESS_HANDLERS #endif #define CONFIG_P2P #ifdef CONFIG_P2P //Added by Albert 20110812 //The CONFIG_WFD is for supporting the Wi-Fi display #define CONFIG_WFD #ifndef CONFIG_WIFI_TEST #define CONFIG_P2P_REMOVE_GROUP_INFO #endif //#define CONFIG_DBG_P2P #define CONFIG_P2P_PS //#define CONFIG_P2P_IPS #define CONFIG_P2P_OP_CHK_SOCIAL_CH #define CONFIG_CFG80211_ONECHANNEL_UNDER_CONCURRENT #endif // Added by Kurt 20110511 //#define CONFIG_TDLS #ifdef CONFIG_TDLS // #ifndef CONFIG_WFD // #define CONFIG_WFD // #endif // #define CONFIG_TDLS_AUTOSETUP // #define CONFIG_TDLS_AUTOCHECKALIVE #endif #define CONFIG_LAYER2_ROAMING #define CONFIG_LAYER2_ROAMING_RESUME #define CONFIG_80211D /* * Hardware Related Config */ //#define CONFIG_BT_COEXIST // set from Makefile //#define CONFIG_ANTENNA_DIVERSITY //#define SUPPORT_HW_RFOFF_DETECTED //#define CONFIG_SW_LED /* * Interface Related Config */ #define CONFIG_SDIO_RX_COPY /* * Others */ //#define CONFIG_MAC_LOOPBACK_DRIVER #define CONFIG_SKB_COPY //for amsdu #define CONFIG_LONG_DELAY_ISSUE #define CONFIG_NEW_SIGNAL_STAT_PROCESS #define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable, */ #define CONFIG_DEAUTH_BEFORE_CONNECT //#define CONFIG_PATCH_JOIN_WRONG_CHANNEL /* * Auto Config Section */ #if defined(CONFIG_RTL8723A) && defined(CONFIG_SDIO_HCI) #define CONFIG_RTL8723A_SDIO #define CONFIG_XMIT_THREAD_MODE #endif #ifdef CONFIG_MAC_LOOPBACK_DRIVER #undef CONFIG_IOCTL_CFG80211 #undef CONFIG_AP_MODE #undef CONFIG_NATIVEAP_MLME #undef CONFIG_POWER_SAVING #undef CONFIG_BT_COEXIST #undef CONFIG_ANTENNA_DIVERSITY #undef SUPPORT_HW_RFOFF_DETECTED #endif //#define CONFIG_CONCURRENT_MODE #ifdef CONFIG_CONCURRENT_MODE #define CONFIG_TSF_RESET_OFFLOAD // For 2 PORT TSF SYNC. //#define CONFIG_HWPORT_SWAP //Port0->Sec , Port1 -> Pri #define CONFIG_STA_MODE_SCAN_UNDER_AP_MODE #endif // CONFIG_CONCURRENT_MODE #ifdef CONFIG_MP_INCLUDED #define MP_DRIVER 1 #define CONFIG_MP_IWPRIV_SUPPORT // disable unnecessary functions for MP //#undef CONFIG_POWER_SAVING //#undef CONFIG_BT_COEXIST //#undef CONFIG_ANTENNA_DIVERSITY //#undef SUPPORT_HW_RFOFF_DETECTED #else // !CONFIG_MP_INCLUDED #define MP_DRIVER 0 #undef CONFIG_MP_IWPRIV_SUPPORT #endif // !CONFIG_MP_INCLUDED #ifdef CONFIG_POWER_SAVING #define CONFIG_IPS #define CONFIG_LPS #if defined(CONFIG_LPS) && defined(CONFIG_SDIO_HCI) #define CONFIG_LPS_LCLK #endif #ifdef CONFIG_LPS_LCLK #define CONFIG_LPS_RPWM_TIMER #ifdef CONFIG_LPS_RPWM_TIMER #define LPS_RPWM_WAIT_MS 30 #endif #endif #endif // #ifdef CONFIG_POWER_SAVING #ifdef CONFIG_BT_COEXIST #ifndef CONFIG_LPS #define CONFIG_LPS // download reserved page to FW #endif #define CONFIG_CHECK_BT_HANG #endif #ifdef CONFIG_ANTENNA_DIVERSITY #define CONFIG_SW_ANTENNA_DIVERSITY //#define CONFIG_HW_ANTENNA_DIVERSITY #endif //#define CONFIG_RF_GAIN_OFFSET #ifndef DISABLE_BB_RF #define DISABLE_BB_RF 0 #endif #if DISABLE_BB_RF #define HAL_MAC_ENABLE 0 #define HAL_BB_ENABLE 0 #define HAL_RF_ENABLE 0 #else #define HAL_MAC_ENABLE 1 #define HAL_BB_ENABLE 1 #define HAL_RF_ENABLE 1 #endif /* * Outsource Related Config */ #define RTL8192CE_SUPPORT 0 #define RTL8192CU_SUPPORT 0 #define RTL8192C_SUPPORT (RTL8192CE_SUPPORT|RTL8192CU_SUPPORT) #define RTL8192DE_SUPPORT 0 #define RTL8192DU_SUPPORT 0 #define RTL8192D_SUPPORT (RTL8192DE_SUPPORT|RTL8192DU_SUPPORT) #define RTL8723AU_SUPPORT 0 #define RTL8723AS_SUPPORT 1 #define RTL8723AE_SUPPORT 0 #define RTL8723A_SUPPORT (RTL8723AU_SUPPORT|RTL8723AS_SUPPORT|RTL8723AE_SUPPORT) #define RTL8723_FPGA_VERIFICATION 0 #define RTL8188EE_SUPPORT 0 #define RTL8188EU_SUPPORT 0 #define RTL8188ES_SUPPORT 0 #define RTL8188E_SUPPORT (RTL8188EE_SUPPORT|RTL8188EU_SUPPORT|RTL8188ES_SUPPORT) #define RTL8188E_FOR_TEST_CHIP 0 //#if (RTL8188E_SUPPORT==1) #define RATE_ADAPTIVE_SUPPORT 0 #define POWER_TRAINING_ACTIVE 0 //#endif #define CONFIG_ATTEMPT_TO_FIX_AP_BEACON_ERROR /* * Debug Related Config */ #define DBG 0 #define CONFIG_DEBUG /* DBG_871X, etc... */ //#define CONFIG_DEBUG_RTL871X /* RT_TRACE, RT_PRINT_DATA, _func_enter_, _func_exit_ */ #define CONFIG_PROC_DEBUG #define DBG_CONFIG_ERROR_DETECT #define DBG_CONFIG_ERROR_RESET //#define DBG_XMIT_BUF //#define DBG_XMIT_BUF_EXT