menuconfig REGULATOR bool "Voltage and Current Regulator Support" help Generic Voltage and Current Regulator support. This framework is designed to provide a generic interface to voltage and current regulators within the Linux kernel. It's intended to provide voltage and current control to client or consumer drivers and also provide status information to user space applications through a sysfs interface. The intention is to allow systems to dynamically control regulator output in order to save power and prolong battery life. This applies to both voltage regulators (where voltage output is controllable) and current sinks (where current output is controllable). This framework safely compiles out if not selected so that client drivers can still be used in systems with no software controllable regulators. If unsure, say no. if REGULATOR config REGULATOR_DEBUG bool "Regulator debug support" help Say yes here to enable debugging support. config REGULATOR_DUMMY bool "Provide a dummy regulator if regulator lookups fail" help If this option is enabled then when a regulator lookup fails and the board has not specified that it has provided full constraints then the regulator core will provide an always enabled dummy regulator will be provided, allowing consumer drivers to continue. A warning will be generated when this substitution is done. config REGULATOR_FIXED_VOLTAGE tristate "Fixed voltage regulator support" help This driver provides support for fixed voltage regulators, useful for systems which use a combination of software managed regulators and simple non-configurable regulators. config REGULATOR_VIRTUAL_CONSUMER tristate "Virtual regulator consumer support" help This driver provides a virtual consumer for the voltage and current regulator API which provides sysfs controls for configuring the supplies requested. This is mainly useful for test purposes. If unsure, say no. config REGULATOR_USERSPACE_CONSUMER tristate "Userspace regulator consumer support" help There are some classes of devices that are controlled entirely from user space. Userspace consumer driver provides ability to control power supplies for such devices. If unsure, say no. config REGULATOR_BQ24022 tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC" help This driver controls a TI bq24022 Charger attached via GPIOs. The provided current regulator can enable/disable charging select between 100 mA and 500 mA charging current limit. config REGULATOR_MAX1586 tristate "Maxim 1586/1587 voltage regulator" depends on I2C help This driver controls a Maxim 1586 or 1587 voltage output regulator via I2C bus. The provided regulator is suitable for PXA27x chips to control VCC_CORE and VCC_USIM voltages. config REGULATOR_MAX8649 tristate "Maxim 8649 voltage regulator" depends on I2C help This driver controls a Maxim 8649 voltage output regulator via I2C bus. config REGULATOR_MAX8660 tristate "Maxim 8660/8661 voltage regulator" depends on I2C help This driver controls a Maxim 8660/8661 voltage output regulator via I2C bus. config REGULATOR_MAX8925 tristate "Maxim MAX8925 Power Management IC" depends on MFD_MAX8925 help Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC. config REGULATOR_MAX8952 tristate "Maxim MAX8952 Power Management IC" depends on I2C help This driver controls a Maxim 8952 voltage output regulator via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS modes ranging from 0.77V to 1.40V by 0.01V steps. config REGULATOR_MAX8997 tristate "Maxim 8997/8966 regulator" depends on MFD_MAX8997 help This driver controls a Maxim 8997/8966 regulator via I2C bus. The provided regulator is suitable for S5PC110, S5PV210, and Exynos-4 chips to control VCC_CORE and VCC_USIM voltages. config REGULATOR_MAX8998 tristate "Maxim 8998 voltage regulator" depends on MFD_MAX8998 help This driver controls a Maxim 8998 voltage output regulator via I2C bus. The provided regulator is suitable for S3C6410 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. config REGULATOR_TWL4030 bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" depends on TWL4030_CORE help This driver supports the voltage regulators provided by this family of companion chips. config REGULATOR_WM831X tristate "Wolfson Microelcronics WM831x PMIC regulators" depends on MFD_WM831X help Support the voltage and current regulators of the WM831x series of PMIC devices. config REGULATOR_WM8350 tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" depends on MFD_WM8350 help This driver provides support for the voltage and current regulators of the WM8350 AudioPlus PMIC. config REGULATOR_WM8400 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" depends on MFD_WM8400 help This driver provides support for the voltage regulators of the WM8400 AudioPlus PMIC. config REGULATOR_WM8994 tristate "Wolfson Microelectronics WM8994 CODEC" depends on MFD_WM8994 help This driver provides support for the voltage regulators on the WM8994 CODEC. config REGULATOR_DA903X tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC" depends on PMIC_DA903X help Say y here to support the BUCKs and LDOs regulators found on Dialog Semiconductor DA9030/DA9034 PMIC. config REGULATOR_PCF50633 tristate "PCF50633 regulator driver" depends on MFD_PCF50633 help Say Y here to support the voltage regulators and convertors on PCF50633 config REGULATOR_LP3971 tristate "National Semiconductors LP3971 PMIC regulator driver" depends on I2C help Say Y here to support the voltage regulators and convertors on National Semiconductors LP3971 PMIC config REGULATOR_LP3972 tristate "National Semiconductors LP3972 PMIC regulator driver" depends on I2C help Say Y here to support the voltage regulators and convertors on National Semiconductors LP3972 PMIC config REGULATOR_PCAP tristate "PCAP2 regulator driver" depends on EZX_PCAP help This driver provides support for the voltage regulators of the PCAP2 PMIC. config REGULATOR_MC13XXX_CORE tristate config REGULATOR_MC13783 tristate "Support regulators on Freescale MC13783 PMIC" depends on MFD_MC13783 select REGULATOR_MC13XXX_CORE help Say y here to support the regulators found on the Freescale MC13783 PMIC. config REGULATOR_MC13892 tristate "Support regulators on Freescale MC13892 PMIC" depends on MFD_MC13XXX select REGULATOR_MC13XXX_CORE help Say y here to support the regulators found on the Freescale MC13892 PMIC. config REGULATOR_AB3100 tristate "ST-Ericsson AB3100 Regulator functions" depends on AB3100_CORE default y if AB3100_CORE help These regulators correspond to functionality in the AB3100 analog baseband dealing with power regulators for the system. config REGULATOR_TPS6105X tristate "TI TPS6105X Power regulators" depends on TPS6105X default y if TPS6105X help This driver supports TPS61050/TPS61052 voltage regulator chips. It is a single boost converter primarily for white LEDs and audio amplifiers. config REGULATOR_TPS65023 tristate "TI TPS65023 Power regulators" depends on I2C help This driver supports TPS65023 voltage regulator chips. TPS65023 provides three step-down converters and two general-purpose LDO voltage regulators. It supports TI's software based Class-2 SmartReflex implementation. config REGULATOR_TPS6507X tristate "TI TPS6507X Power regulators" depends on I2C help This driver supports TPS6507X voltage regulator chips. TPS6507X provides three step-down converters and two general-purpose LDO voltage regulators. It supports TI's software based Class-2 SmartReflex implementation. config REGULATOR_88PM8607 bool "Marvell 88PM8607 Power regulators" depends on MFD_88PM860X=y help This driver supports 88PM8607 voltage regulator chips. config REGULATOR_ISL6271A tristate "Intersil ISL6271A Power regulator" depends on I2C help This driver supports ISL6271A voltage regulator chip. config REGULATOR_AD5398 tristate "Analog Devices AD5398/AD5821 regulators" depends on I2C help This driver supports AD5398 and AD5821 current regulator chips. If building into module, its name is ad5398.ko. config REGULATOR_AB8500 bool "ST-Ericsson AB8500 Power Regulators" depends on AB8500_CORE help This driver supports the regulators found on the ST-Ericsson mixed signal AB8500 PMIC config REGULATOR_DB8500_PRCMU bool "ST-Ericsson DB8500 Voltage Domain Regulators" depends on MFD_DB8500_PRCMU help This driver supports the voltage domain regulators controlled by the DB8500 PRCMU config REGULATOR_TPS6586X tristate "TI TPS6586X Power regulators" depends on MFD_TPS6586X help This driver supports TPS6586X voltage regulator chips. config REGULATOR_TPS6524X tristate "TI TPS6524X Power regulators" depends on SPI help This driver supports TPS6524X voltage regulator chips. TPS6524X provides three step-down converters and two general-purpose LDO voltage regulators. This device is interfaced using a customized serial interface currently supported on the sequencer serial port controller. endif