#include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "scsi.h" #include #include "wd33c93.h" #include "a2091.h" #include static int a2091_release(struct Scsi_Host *instance); static irqreturn_t a2091_intr(int irq, void *data) { struct Scsi_Host *instance = data; a2091_scsiregs *regs = (a2091_scsiregs *)(instance->base); unsigned int status = regs->ISTR; unsigned long flags; if (!(status & (ISTR_INT_F | ISTR_INT_P)) || !(status & ISTR_INTS)) return IRQ_NONE; spin_lock_irqsave(instance->host_lock, flags); wd33c93_intr(instance); spin_unlock_irqrestore(instance->host_lock, flags); return IRQ_HANDLED; } static int dma_setup(struct scsi_cmnd *cmd, int dir_in) { struct Scsi_Host *instance = cmd->device->host; struct WD33C93_hostdata *hdata = shost_priv(instance); a2091_scsiregs *regs = (a2091_scsiregs *)(instance->base); unsigned short cntr = CNTR_PDMD | CNTR_INTEN; unsigned long addr = virt_to_bus(cmd->SCp.ptr); /* don't allow DMA if the physical address is bad */ if (addr & A2091_XFER_MASK) { hdata->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff; hdata->dma_bounce_buffer = kmalloc(hdata->dma_bounce_len, GFP_KERNEL); /* can't allocate memory; use PIO */ if (!hdata->dma_bounce_buffer) { hdata->dma_bounce_len = 0; return 1; } /* get the physical address of the bounce buffer */ addr = virt_to_bus(hdata->dma_bounce_buffer); /* the bounce buffer may not be in the first 16M of physmem */ if (addr & A2091_XFER_MASK) { /* we could use chipmem... maybe later */ kfree(hdata->dma_bounce_buffer); hdata->dma_bounce_buffer = NULL; hdata->dma_bounce_len = 0; return 1; } if (!dir_in) { /* copy to bounce buffer for a write */ memcpy(hdata->dma_bounce_buffer, cmd->SCp.ptr, cmd->SCp.this_residual); } } /* setup dma direction */ if (!dir_in) cntr |= CNTR_DDIR; /* remember direction */ hdata->dma_dir = dir_in; regs->CNTR = cntr; /* setup DMA *physical* address */ regs->ACR = addr; if (dir_in) { /* invalidate any cache */ cache_clear(addr, cmd->SCp.this_residual); } else { /* push any dirty cache */ cache_push(addr, cmd->SCp.this_residual); } /* start DMA */ regs->ST_DMA = 1; /* return success */ return 0; } static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, int status) { struct WD33C93_hostdata *hdata = shost_priv(instance); a2091_scsiregs *regs = (a2091_scsiregs *)(instance->base); /* disable SCSI interrupts */ unsigned short cntr = CNTR_PDMD; if (!hdata->dma_dir) cntr |= CNTR_DDIR; /* disable SCSI interrupts */ regs->CNTR = cntr; /* flush if we were reading */ if (hdata->dma_dir) { regs->FLUSH = 1; while (!(regs->ISTR & ISTR_FE_FLG)) ; } /* clear a possible interrupt */ regs->CINT = 1; /* stop DMA */ regs->SP_DMA = 1; /* restore the CONTROL bits (minus the direction flag) */ regs->CNTR = CNTR_PDMD | CNTR_INTEN; /* copy from a bounce buffer, if necessary */ if (status && hdata->dma_bounce_buffer) { if (hdata->dma_dir) memcpy(SCpnt->SCp.ptr, hdata->dma_bounce_buffer, SCpnt->SCp.this_residual); kfree(hdata->dma_bounce_buffer); hdata->dma_bounce_buffer = NULL; hdata->dma_bounce_len = 0; } } static int __init a2091_detect(struct scsi_host_template *tpnt) { static unsigned char called = 0; struct Scsi_Host *instance; unsigned long address; struct zorro_dev *z = NULL; wd33c93_regs wdregs; a2091_scsiregs *regs; struct WD33C93_hostdata *hdata; int num_a2091 = 0; if (!MACH_IS_AMIGA || called) return 0; called = 1; tpnt->proc_name = "A2091"; tpnt->proc_info = &wd33c93_proc_info; while ((z = zorro_find_device(ZORRO_WILDCARD, z))) { if (z->id != ZORRO_PROD_CBM_A590_A2091_1 && z->id != ZORRO_PROD_CBM_A590_A2091_2) continue; address = z->resource.start; if (!request_mem_region(address, 256, "wd33c93")) continue; instance = scsi_register(tpnt, sizeof(struct WD33C93_hostdata)); if (instance == NULL) goto release; instance->base = ZTWO_VADDR(address); instance->irq = IRQ_AMIGA_PORTS; instance->unique_id = z->slotaddr; regs = (a2091_scsiregs *)(instance->base); regs->DAWR = DAWR_A2091; wdregs.SASR = ®s->SASR; wdregs.SCMD = ®s->SCMD; hdata = shost_priv(instance); hdata->no_sync = 0xff; hdata->fast = 0; hdata->dma_mode = CTRL_DMA; wd33c93_init(instance, wdregs, dma_setup, dma_stop, WD33C93_FS_8_10); if (request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED, "A2091 SCSI", instance)) goto unregister; regs->CNTR = CNTR_PDMD | CNTR_INTEN; num_a2091++; continue; unregister: scsi_unregister(instance); release: release_mem_region(address, 256); } return num_a2091; } static int a2091_bus_reset(struct scsi_cmnd *cmd) { /* FIXME perform bus-specific reset */ /* FIXME 2: kill this function, and let midlayer fall back to the same action, calling wd33c93_host_reset() */ spin_lock_irq(cmd->device->host->host_lock); wd33c93_host_reset(cmd); spin_unlock_irq(cmd->device->host->host_lock); return SUCCESS; } #define HOSTS_C static struct scsi_host_template driver_template = { .proc_name = "A2901", .name = "Commodore A2091/A590 SCSI", .detect = a2091_detect, .release = a2091_release, .queuecommand = wd33c93_queuecommand, .eh_abort_handler = wd33c93_abort, .eh_bus_reset_handler = a2091_bus_reset, .eh_host_reset_handler = wd33c93_host_reset, .can_queue = CAN_QUEUE, .this_id = 7, .sg_tablesize = SG_ALL, .cmd_per_lun = CMD_PER_LUN, .use_clustering = DISABLE_CLUSTERING }; #include "scsi_module.c" static int a2091_release(struct Scsi_Host *instance) { #ifdef MODULE a2091_scsiregs *regs = (a2091_scsiregs *)(instance->base); regs->CNTR = 0; release_mem_region(ZTWO_PADDR(instance->base), 256); free_irq(IRQ_AMIGA_PORTS, instance); #endif return 1; } MODULE_LICENSE("GPL");