// SPDX-License-Identifier: GPL-2.0+
/*
* comedi/drivers/amplc_pci224.c
* Driver for Amplicon PCI224 and PCI234 AO boards.
*
* Copyright (C) 2005 MEV Ltd.
*
* COMEDI - Linux Control and Measurement Device Interface
* Copyright (C) 1998,2000 David A. Schleef
*/
/*
* Driver: amplc_pci224
* Description: Amplicon PCI224, PCI234
* Author: Ian Abbott
* Devices: [Amplicon] PCI224 (amplc_pci224), PCI234
* Updated: Thu, 31 Jul 2014 11:08:03 +0000
* Status: works, but see caveats
*
* Supports:
*
* - ao_insn read/write
* - ao_do_cmd mode with the following sources:
*
* - start_src TRIG_INT TRIG_EXT
* - scan_begin_src TRIG_TIMER TRIG_EXT
* - convert_src TRIG_NOW
* - scan_end_src TRIG_COUNT
* - stop_src TRIG_COUNT TRIG_EXT TRIG_NONE
*
* The channel list must contain at least one channel with no repeated
* channels. The scan end count must equal the number of channels in
* the channel list.
*
* There is only one external trigger source so only one of start_src,
* scan_begin_src or stop_src may use TRIG_EXT.
*
* Configuration options:
* none
*
* Manual configuration of PCI cards is not supported; they are configured
* automatically.
*
* Output range selection - PCI224:
*
* Output ranges on PCI224 are partly software-selectable and partly
* hardware-selectable according to jumper LK1. All channels are set
* to the same range:
*
* - LK1 position 1-2 (factory default) corresponds to the following
* comedi ranges:
*
* 0: [-10V,+10V]; 1: [-5V,+5V]; 2: [-2.5V,+2.5V], 3: [-1.25V,+1.25V],
* 4: [0,+10V], 5: [0,+5V], 6: [0,+2.5V], 7: [0,+1.25V]
*
* - LK1 position 2-3 corresponds to the following Comedi ranges, using
* an external voltage reference:
*
* 0: [-Vext,+Vext],
* 1: [0,+Vext]
*
* Output range selection - PCI234:
*
* Output ranges on PCI234 are hardware-selectable according to jumper
* LK1 which affects all channels, and jumpers LK2, LK3, LK4 and LK5
* which affect channels 0, 1, 2 and 3 individually. LK1 chooses between
* an internal 5V reference and an external voltage reference (Vext).
* LK2/3/4/5 choose (per channel) to double the reference or not according
* to the following table:
*
* LK1 position LK2/3/4/5 pos Comedi range
* ------------- ------------- --------------
* 2-3 (factory) 1-2 (factory) 0: [-10V,+10V]
* 2-3 (factory) 2-3 1: [-5V,+5V]
* 1-2 1-2 (factory) 2: [-2*Vext,+2*Vext]
* 1-2 2-3 3: [-Vext,+Vext]
*
* Caveats:
*
* 1) All channels on the PCI224 share the same range. Any change to the
* range as a result of insn_write or a streaming command will affect
* the output voltages of all channels, including those not specified
* by the instruction or command.
*
* 2) For the analog output command, the first scan may be triggered
* falsely at the start of acquisition. This occurs when the DAC scan
* trigger source is switched from 'none' to 'timer' (scan_begin_src =
* TRIG_TIMER) or 'external' (scan_begin_src == TRIG_EXT) at the start
* of acquisition and the trigger source is at logic level 1 at the
* time of the switch. This is very likely for TRIG_TIMER. For
* TRIG_EXT, it depends on the state of the external line and whether
* the CR_INVERT flag has been set. The remaining scans are triggered
* correctly.
*/
#include
#include
#include
#include "../comedi_pci.h"
#include "comedi_8254.h"
/*
* PCI224/234 i/o space 1 (PCIBAR2) registers.
*/
#define PCI224_Z2_BASE 0x14 /* 82C54 counter/timer */
#define PCI224_ZCLK_SCE 0x1A /* Group Z Clock Configuration Register */
#define PCI224_ZGAT_SCE 0x1D /* Group Z Gate Configuration Register */
#define PCI224_INT_SCE 0x1E /* ISR Interrupt source mask register */
/* /Interrupt status */
/*
* PCI224/234 i/o space 2 (PCIBAR3) 16-bit registers.
*/
#define PCI224_DACDATA 0x00 /* (w-o) DAC FIFO data. */
#define PCI224_SOFTTRIG 0x00 /* (r-o) DAC software scan trigger. */
#define PCI224_DACCON 0x02 /* (r/w) DAC status/configuration. */
#define PCI224_FIFOSIZ 0x04 /* (w-o) FIFO size for wraparound mode. */
#define PCI224_DACCEN 0x06 /* (w-o) DAC channel enable register. */
/*
* DACCON values.
*/
/* (r/w) Scan trigger. */
#define PCI224_DACCON_TRIG(x) (((x) & 0x7) << 0)
#define PCI224_DACCON_TRIG_MASK PCI224_DACCON_TRIG(7)
#define PCI224_DACCON_TRIG_NONE PCI224_DACCON_TRIG(0) /* none */
#define PCI224_DACCON_TRIG_SW PCI224_DACCON_TRIG(1) /* soft trig */
#define PCI224_DACCON_TRIG_EXTP PCI224_DACCON_TRIG(2) /* ext + edge */
#define PCI224_DACCON_TRIG_EXTN PCI224_DACCON_TRIG(3) /* ext - edge */
#define PCI224_DACCON_TRIG_Z2CT0 PCI224_DACCON_TRIG(4) /* Z2 CT0 out */
#define PCI224_DACCON_TRIG_Z2CT1 PCI224_DACCON_TRIG(5) /* Z2 CT1 out */
#define PCI224_DACCON_TRIG_Z2CT2 PCI224_DACCON_TRIG(6) /* Z2 CT2 out */
/* (r/w) Polarity (PCI224 only, PCI234 always bipolar!). */
#define PCI224_DACCON_POLAR(x) (((x) & 0x1) << 3)
#define PCI224_DACCON_POLAR_MASK PCI224_DACCON_POLAR(1)
#define PCI224_DACCON_POLAR_UNI PCI224_DACCON_POLAR(0) /* [0,+V] */
#define PCI224_DACCON_POLAR_BI PCI224_DACCON_POLAR(1) /* [-V,+V] */
/* (r/w) Internal Vref (PCI224 only, when LK1 in position 1-2). */
#define PCI224_DACCON_VREF(x) (((x) & 0x3) << 4)
#define PCI224_DACCON_VREF_MASK PCI224_DACCON_VREF(3)
#define PCI224_DACCON_VREF_1_25 PCI224_DACCON_VREF(0) /* 1.25V */
#define PCI224_DACCON_VREF_2_5 PCI224_DACCON_VREF(1) /* 2.5V */
#define PCI224_DACCON_VREF_5 PCI224_DACCON_VREF(2) /* 5V */
#define PCI224_DACCON_VREF_10 PCI224_DACCON_VREF(3) /* 10V */
/* (r/w) Wraparound mode enable (to play back stored waveform). */
#define PCI224_DACCON_FIFOWRAP BIT(7)
/* (r/w) FIFO enable. It MUST be set! */
#define PCI224_DACCON_FIFOENAB BIT(8)
/* (r/w) FIFO interrupt trigger level (most values are not very useful). */
#define PCI224_DACCON_FIFOINTR(x) (((x) & 0x7) << 9)
#define PCI224_DACCON_FIFOINTR_MASK PCI224_DACCON_FIFOINTR(7)
#define PCI224_DACCON_FIFOINTR_EMPTY PCI224_DACCON_FIFOINTR(0) /* empty */
#define PCI224_DACCON_FIFOINTR_NEMPTY PCI224_DACCON_FIFOINTR(1) /* !empty */
#define PCI224_DACCON_FIFOINTR_NHALF PCI224_DACCON_FIFOINTR(2) /* !half */
#define PCI224_DACCON_FIFOINTR_HALF PCI224_DACCON_FIFOINTR(3) /* half */
#define PCI224_DACCON_FIFOINTR_NFULL PCI224_DACCON_FIFOINTR(4) /* !full */
#define PCI224_DACCON_FIFOINTR_FULL PCI224_DACCON_FIFOINTR(5) /* full */
/* (r-o) FIFO fill level. */
#define PCI224_DACCON_FIFOFL(x) (((x) & 0x7) << 12)
#define PCI224_DACCON_FIFOFL_MASK PCI224_DACCON_FIFOFL(7)
#define PCI224_DACCON_FIFOFL_EMPTY PCI224_DACCON_FIFOFL(1) /* 0 */
#define PCI224_DACCON_FIFOFL_ONETOHALF PCI224_DACCON_FIFOFL(0) /* 1-2048 */
#define PCI224_DACCON_FIFOFL_HALFTOFULL PCI224_DACCON_FIFOFL(4) /* 2049-4095 */
#define PCI224_DACCON_FIFOFL_FULL PCI224_DACCON_FIFOFL(6) /* 4096 */
/* (r-o) DAC busy flag. */
#define PCI224_DACCON_BUSY BIT(15)
/* (w-o) FIFO reset. */
#define PCI224_DACCON_FIFORESET BIT(12)
/* (w-o) Global reset (not sure what it does). */
#define PCI224_DACCON_GLOBALRESET BIT(13)
/*
* DAC FIFO size.
*/
#define PCI224_FIFO_SIZE 4096
/*
* DAC FIFO guaranteed minimum room available, depending on reported fill level.
* The maximum room available depends on the reported fill level and how much
* has been written!
*/
#define PCI224_FIFO_ROOM_EMPTY PCI224_FIFO_SIZE
#define PCI224_FIFO_ROOM_ONETOHALF (PCI224_FIFO_SIZE / 2)
#define PCI224_FIFO_ROOM_HALFTOFULL 1
#define PCI224_FIFO_ROOM_FULL 0
/*
* Counter/timer clock input configuration sources.
*/
#define CLK_CLK 0 /* reserved (channel-specific clock) */
#define CLK_10MHZ 1 /* internal 10 MHz clock */
#define CLK_1MHZ 2 /* internal 1 MHz clock */
#define CLK_100KHZ 3 /* internal 100 kHz clock */
#define CLK_10KHZ 4 /* internal 10 kHz clock */
#define CLK_1KHZ 5 /* internal 1 kHz clock */
#define CLK_OUTNM1 6 /* output of channel-1 modulo total */
#define CLK_EXT 7 /* external clock */
static unsigned int pci224_clk_config(unsigned int chan, unsigned int src)
{
return ((chan & 3) << 3) | (src & 7);
}
/*
* Counter/timer gate input configuration sources.
*/
#define GAT_VCC 0 /* VCC (i.e. enabled) */
#define GAT_GND 1 /* GND (i.e. disabled) */
#define GAT_EXT 2 /* reserved (external gate input) */
#define GAT_NOUTNM2 3 /* inverted output of channel-2 modulo total */
static unsigned int pci224_gat_config(unsigned int chan, unsigned int src)
{
return ((chan & 3) << 3) | (src & 7);
}
/*
* Summary of CLK_OUTNM1 and GAT_NOUTNM2 connections for PCI224 and PCI234:
*
* Channel's Channel's
* clock input gate input
* Channel CLK_OUTNM1 GAT_NOUTNM2
* ------- ---------- -----------
* Z2-CT0 Z2-CT2-OUT /Z2-CT1-OUT
* Z2-CT1 Z2-CT0-OUT /Z2-CT2-OUT
* Z2-CT2 Z2-CT1-OUT /Z2-CT0-OUT
*/
/*
* Interrupt enable/status bits
*/
#define PCI224_INTR_EXT 0x01 /* rising edge on external input */
#define PCI224_INTR_DAC 0x04 /* DAC (FIFO) interrupt */
#define PCI224_INTR_Z2CT1 0x20 /* rising edge on Z2-CT1 output */
#define PCI224_INTR_EDGE_BITS (PCI224_INTR_EXT | PCI224_INTR_Z2CT1)
#define PCI224_INTR_LEVEL_BITS PCI224_INTR_DACFIFO
/*
* Handy macros.
*/
/* Combine old and new bits. */
#define COMBINE(old, new, mask) (((old) & ~(mask)) | ((new) & (mask)))
/* Current CPU. XXX should this be hard_smp_processor_id()? */
#define THISCPU smp_processor_id()
/* State bits for use with atomic bit operations. */
#define AO_CMD_STARTED 0
/*
* Range tables.
*/
/*
* The ranges for PCI224.
*
* These are partly hardware-selectable by jumper LK1 and partly
* software-selectable.
*
* All channels share the same hardware range.
*/
static const struct comedi_lrange range_pci224 = {
10, {
/* jumper LK1 in position 1-2 (factory default) */
BIP_RANGE(10),
BIP_RANGE(5),
BIP_RANGE(2.5),
BIP_RANGE(1.25),
UNI_RANGE(10),
UNI_RANGE(5),
UNI_RANGE(2.5),
UNI_RANGE(1.25),
/* jumper LK1 in position 2-3 */
RANGE_ext(-1, 1), /* bipolar [-Vext,+Vext] */
RANGE_ext(0, 1), /* unipolar [0,+Vext] */
}
};
static const unsigned short hwrange_pci224[10] = {
/* jumper LK1 in position 1-2 (factory default) */
PCI224_DACCON_POLAR_BI | PCI224_DACCON_VREF_10,
PCI224_DACCON_POLAR_BI | PCI224_DACCON_VREF_5,
PCI224_DACCON_POLAR_BI | PCI224_DACCON_VREF_2_5,
PCI224_DACCON_POLAR_BI | PCI224_DACCON_VREF_1_25,
PCI224_DACCON_POLAR_UNI | PCI224_DACCON_VREF_10,
PCI224_DACCON_POLAR_UNI | PCI224_DACCON_VREF_5,
PCI224_DACCON_POLAR_UNI | PCI224_DACCON_VREF_2_5,
PCI224_DACCON_POLAR_UNI | PCI224_DACCON_VREF_1_25,
/* jumper LK1 in position 2-3 */
PCI224_DACCON_POLAR_BI,
PCI224_DACCON_POLAR_UNI,
};
/* Used to check all channels set to the same range on PCI224. */
static const unsigned char range_check_pci224[10] = {
0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
};
/*
* The ranges for PCI234.
*
* These are all hardware-selectable by jumper LK1 affecting all channels,
* and jumpers LK2, LK3, LK4 and LK5 affecting channels 0, 1, 2 and 3
* individually.
*/
static const struct comedi_lrange range_pci234 = {
4, {
/* LK1: 1-2 (fact def), LK2/3/4/5: 2-3 (fac def) */
BIP_RANGE(10),
/* LK1: 1-2 (fact def), LK2/3/4/5: 1-2 */
BIP_RANGE(5),
/* LK1: 2-3, LK2/3/4/5: 2-3 (fac def) */
RANGE_ext(-2, 2), /* bipolar [-2*Vext,+2*Vext] */
/* LK1: 2-3, LK2/3/4/5: 1-2 */
RANGE_ext(-1, 1), /* bipolar [-Vext,+Vext] */
}
};
/* N.B. PCI234 ignores the polarity bit, but software uses it. */
static const unsigned short hwrange_pci234[4] = {
PCI224_DACCON_POLAR_BI,
PCI224_DACCON_POLAR_BI,
PCI224_DACCON_POLAR_BI,
PCI224_DACCON_POLAR_BI,
};
/* Used to check all channels use same LK1 setting on PCI234. */
static const unsigned char range_check_pci234[4] = {
0, 0, 1, 1,
};
/*
* Board descriptions.
*/
enum pci224_model { pci224_model, pci234_model };
struct pci224_board {
const char *name;
unsigned int ao_chans;
unsigned int ao_bits;
const struct comedi_lrange *ao_range;
const unsigned short *ao_hwrange;
const unsigned char *ao_range_check;
};
static const struct pci224_board pci224_boards[] = {
[pci224_model] = {
.name = "pci224",
.ao_chans = 16,
.ao_bits = 12,
.ao_range = &range_pci224,
.ao_hwrange = &hwrange_pci224[0],
.ao_range_check = &range_check_pci224[0],
},
[pci234_model] = {
.name = "pci234",
.ao_chans = 4,
.ao_bits = 16,
.ao_range = &range_pci234,
.ao_hwrange = &hwrange_pci234[0],
.ao_range_check = &range_check_pci234[0],
},
};
struct pci224_private {
unsigned long iobase1;
unsigned long state;
spinlock_t ao_spinlock; /* spinlock for AO command handling */
unsigned short *ao_scan_vals;
unsigned char *ao_scan_order;
int intr_cpuid;
short intr_running;
unsigned short daccon;
unsigned short ao_enab; /* max 16 channels so 'short' will do */
unsigned char intsce;
};
/*
* Called from the 'insn_write' function to perform a single write.
*/
static void
pci224_ao_set_data(struct comedi_device *dev, int chan, int range,
unsigned int data)
{
const struct pci224_board *board = dev->board_ptr;
struct pci224_private *devpriv = dev->private;
unsigned short mangled;
/* Enable the channel. */
outw(1 << chan, dev->iobase + PCI224_DACCEN);
/* Set range and reset FIFO. */
devpriv->daccon = COMBINE(devpriv->daccon, board->ao_hwrange[range],
PCI224_DACCON_POLAR_MASK |
PCI224_DACCON_VREF_MASK);
outw(devpriv->daccon | PCI224_DACCON_FIFORESET,
dev->iobase + PCI224_DACCON);
/*
* Mangle the data. The hardware expects:
* - bipolar: 16-bit 2's complement
* - unipolar: 16-bit unsigned
*/
mangled = (unsigned short)data << (16 - board->ao_bits);
if ((devpriv->daccon & PCI224_DACCON_POLAR_MASK) ==
PCI224_DACCON_POLAR_BI) {
mangled ^= 0x8000;
}
/* Write mangled data to the FIFO. */
outw(mangled, dev->iobase + PCI224_DACDATA);
/* Trigger the conversion. */
inw(dev->iobase + PCI224_SOFTTRIG);
}
static int pci224_ao_insn_write(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned int chan = CR_CHAN(insn->chanspec);
unsigned int range = CR_RANGE(insn->chanspec);
unsigned int val = s->readback[chan];
int i;
for (i = 0; i < insn->n; i++) {
val = data[i];
pci224_ao_set_data(dev, chan, range, val);
}
s->readback[chan] = val;
return insn->n;
}
/*
* Kills a command running on the AO subdevice.
*/
static void pci224_ao_stop(struct comedi_device *dev,
struct comedi_subdevice *s)
{
struct pci224_private *devpriv = dev->private;
unsigned long flags;
if (!test_and_clear_bit(AO_CMD_STARTED, &devpriv->state))
return;
spin_lock_irqsave(&devpriv->ao_spinlock, flags);
/* Kill the interrupts. */
devpriv->intsce = 0;
outb(0, devpriv->iobase1 + PCI224_INT_SCE);
/*
* Interrupt routine may or may not be running. We may or may not
* have been called from the interrupt routine (directly or
* indirectly via a comedi_events() callback routine). It's highly
* unlikely that we've been called from some other interrupt routine
* but who knows what strange things coders get up to!
*
* If the interrupt routine is currently running, wait for it to
* finish, unless we appear to have been called via the interrupt
* routine.
*/
while (devpriv->intr_running && devpriv->intr_cpuid != THISCPU) {
spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
spin_lock_irqsave(&devpriv->ao_spinlock, flags);
}
spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
/* Reconfigure DAC for insn_write usage. */
outw(0, dev->iobase + PCI224_DACCEN); /* Disable channels. */
devpriv->daccon =
COMBINE(devpriv->daccon,
PCI224_DACCON_TRIG_SW | PCI224_DACCON_FIFOINTR_EMPTY,
PCI224_DACCON_TRIG_MASK | PCI224_DACCON_FIFOINTR_MASK);
outw(devpriv->daccon | PCI224_DACCON_FIFORESET,
dev->iobase + PCI224_DACCON);
}
/*
* Handles start of acquisition for the AO subdevice.
*/
static void pci224_ao_start(struct comedi_device *dev,
struct comedi_subdevice *s)
{
struct pci224_private *devpriv = dev->private;
struct comedi_cmd *cmd = &s->async->cmd;
unsigned long flags;
set_bit(AO_CMD_STARTED, &devpriv->state);
/* Enable interrupts. */
spin_lock_irqsave(&devpriv->ao_spinlock, flags);
if (cmd->stop_src == TRIG_EXT)
devpriv->intsce = PCI224_INTR_EXT | PCI224_INTR_DAC;
else
devpriv->intsce = PCI224_INTR_DAC;
outb(devpriv->intsce, devpriv->iobase1 + PCI224_INT_SCE);
spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
}
/*
* Handles interrupts from the DAC FIFO.
*/
static void pci224_ao_handle_fifo(struct comedi_device *dev,
struct comedi_subdevice *s)
{
struct pci224_private *devpriv = dev->private;
struct comedi_cmd *cmd = &s->async->cmd;
unsigned int num_scans = comedi_nscans_left(s, 0);
unsigned int room;
unsigned short dacstat;
unsigned int i, n;
/* Determine how much room is in the FIFO (in samples). */
dacstat = inw(dev->iobase + PCI224_DACCON);
switch (dacstat & PCI224_DACCON_FIFOFL_MASK) {
case PCI224_DACCON_FIFOFL_EMPTY:
room = PCI224_FIFO_ROOM_EMPTY;
if (cmd->stop_src == TRIG_COUNT &&
s->async->scans_done >= cmd->stop_arg) {
/* FIFO empty at end of counted acquisition. */
s->async->events |= COMEDI_CB_EOA;
comedi_handle_events(dev, s);
return;
}
break;
case PCI224_DACCON_FIFOFL_ONETOHALF:
room = PCI224_FIFO_ROOM_ONETOHALF;
break;
case PCI224_DACCON_FIFOFL_HALFTOFULL:
room = PCI224_FIFO_ROOM_HALFTOFULL;
break;
default:
room = PCI224_FIFO_ROOM_FULL;
break;
}
if (room >= PCI224_FIFO_ROOM_ONETOHALF) {
/* FIFO is less than half-full. */
if (num_scans == 0) {
/* Nothing left to put in the FIFO. */
dev_err(dev->class_dev, "AO buffer underrun\n");
s->async->events |= COMEDI_CB_OVERFLOW;
}
}
/* Determine how many new scans can be put in the FIFO. */
room /= cmd->chanlist_len;
/* Determine how many scans to process. */
if (num_scans > room)
num_scans = room;
/* Process scans. */
for (n = 0; n < num_scans; n++) {
comedi_buf_read_samples(s, &devpriv->ao_scan_vals[0],
cmd->chanlist_len);
for (i = 0; i < cmd->chanlist_len; i++) {
outw(devpriv->ao_scan_vals[devpriv->ao_scan_order[i]],
dev->iobase + PCI224_DACDATA);
}
}
if (cmd->stop_src == TRIG_COUNT &&
s->async->scans_done >= cmd->stop_arg) {
/*
* Change FIFO interrupt trigger level to wait
* until FIFO is empty.
*/
devpriv->daccon = COMBINE(devpriv->daccon,
PCI224_DACCON_FIFOINTR_EMPTY,
PCI224_DACCON_FIFOINTR_MASK);
outw(devpriv->daccon, dev->iobase + PCI224_DACCON);
}
if ((devpriv->daccon & PCI224_DACCON_TRIG_MASK) ==
PCI224_DACCON_TRIG_NONE) {
unsigned short trig;
/*
* This is the initial DAC FIFO interrupt at the
* start of the acquisition. The DAC's scan trigger
* has been set to 'none' up until now.
*
* Now that data has been written to the FIFO, the
* DAC's scan trigger source can be set to the
* correct value.
*
* BUG: The first scan will be triggered immediately
* if the scan trigger source is at logic level 1.
*/
if (cmd->scan_begin_src == TRIG_TIMER) {
trig = PCI224_DACCON_TRIG_Z2CT0;
} else {
/* cmd->scan_begin_src == TRIG_EXT */
if (cmd->scan_begin_arg & CR_INVERT)
trig = PCI224_DACCON_TRIG_EXTN;
else
trig = PCI224_DACCON_TRIG_EXTP;
}
devpriv->daccon =
COMBINE(devpriv->daccon, trig, PCI224_DACCON_TRIG_MASK);
outw(devpriv->daccon, dev->iobase + PCI224_DACCON);
}
comedi_handle_events(dev, s);
}
static int pci224_ao_inttrig_start(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int trig_num)
{
struct comedi_cmd *cmd = &s->async->cmd;
if (trig_num != cmd->start_arg)
return -EINVAL;
s->async->inttrig = NULL;
pci224_ao_start(dev, s);
return 1;
}
static int pci224_ao_check_chanlist(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_cmd *cmd)
{
const struct pci224_board *board = dev->board_ptr;
unsigned int range_check_0;
unsigned int chan_mask = 0;
int i;
range_check_0 = board->ao_range_check[CR_RANGE(cmd->chanlist[0])];
for (i = 0; i < cmd->chanlist_len; i++) {
unsigned int chan = CR_CHAN(cmd->chanlist[i]);
if (chan_mask & (1 << chan)) {
dev_dbg(dev->class_dev,
"%s: entries in chanlist must contain no duplicate channels\n",
__func__);
return -EINVAL;
}
chan_mask |= 1 << chan;
if (board->ao_range_check[CR_RANGE(cmd->chanlist[i])] !=
range_check_0) {
dev_dbg(dev->class_dev,
"%s: entries in chanlist have incompatible ranges\n",
__func__);
return -EINVAL;
}
}
return 0;
}
#define MAX_SCAN_PERIOD 0xFFFFFFFFU
#define MIN_SCAN_PERIOD 2500
#define CONVERT_PERIOD 625
/*
* 'do_cmdtest' function for AO subdevice.
*/
static int
pci224_ao_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_cmd *cmd)
{
int err = 0;
unsigned int arg;
/* Step 1 : check if triggers are trivially valid */
err |= comedi_check_trigger_src(&cmd->start_src, TRIG_INT | TRIG_EXT);
err |= comedi_check_trigger_src(&cmd->scan_begin_src,
TRIG_EXT | TRIG_TIMER);
err |= comedi_check_trigger_src(&cmd->convert_src, TRIG_NOW);
err |= comedi_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
err |= comedi_check_trigger_src(&cmd->stop_src,
TRIG_COUNT | TRIG_EXT | TRIG_NONE);
if (err)
return 1;
/* Step 2a : make sure trigger sources are unique */
err |= comedi_check_trigger_is_unique(cmd->start_src);
err |= comedi_check_trigger_is_unique(cmd->scan_begin_src);
err |= comedi_check_trigger_is_unique(cmd->stop_src);
/* Step 2b : and mutually compatible */
/*
* There's only one external trigger signal (which makes these
* tests easier). Only one thing can use it.
*/
arg = 0;
if (cmd->start_src & TRIG_EXT)
arg++;
if (cmd->scan_begin_src & TRIG_EXT)
arg++;
if (cmd->stop_src & TRIG_EXT)
arg++;
if (arg > 1)
err |= -EINVAL;
if (err)
return 2;
/* Step 3: check if arguments are trivially valid */
switch (cmd->start_src) {
case TRIG_INT:
err |= comedi_check_trigger_arg_is(&cmd->start_arg, 0);
break;
case TRIG_EXT:
/* Force to external trigger 0. */
if (cmd->start_arg & ~CR_FLAGS_MASK) {
cmd->start_arg =
COMBINE(cmd->start_arg, 0, ~CR_FLAGS_MASK);
err |= -EINVAL;
}
/* The only flag allowed is CR_EDGE, which is ignored. */
if (cmd->start_arg & CR_FLAGS_MASK & ~CR_EDGE) {
cmd->start_arg = COMBINE(cmd->start_arg, 0,
CR_FLAGS_MASK & ~CR_EDGE);
err |= -EINVAL;
}
break;
}
switch (cmd->scan_begin_src) {
case TRIG_TIMER:
err |= comedi_check_trigger_arg_max(&cmd->scan_begin_arg,
MAX_SCAN_PERIOD);
arg = cmd->chanlist_len * CONVERT_PERIOD;
if (arg < MIN_SCAN_PERIOD)
arg = MIN_SCAN_PERIOD;
err |= comedi_check_trigger_arg_min(&cmd->scan_begin_arg, arg);
break;
case TRIG_EXT:
/* Force to external trigger 0. */
if (cmd->scan_begin_arg & ~CR_FLAGS_MASK) {
cmd->scan_begin_arg =
COMBINE(cmd->scan_begin_arg, 0, ~CR_FLAGS_MASK);
err |= -EINVAL;
}
/* Only allow flags CR_EDGE and CR_INVERT. Ignore CR_EDGE. */
if (cmd->scan_begin_arg & CR_FLAGS_MASK &
~(CR_EDGE | CR_INVERT)) {
cmd->scan_begin_arg =
COMBINE(cmd->scan_begin_arg, 0,
CR_FLAGS_MASK & ~(CR_EDGE | CR_INVERT));
err |= -EINVAL;
}
break;
}
err |= comedi_check_trigger_arg_is(&cmd->convert_arg, 0);
err |= comedi_check_trigger_arg_is(&cmd->scan_end_arg,
cmd->chanlist_len);
switch (cmd->stop_src) {
case TRIG_COUNT:
err |= comedi_check_trigger_arg_min(&cmd->stop_arg, 1);
break;
case TRIG_EXT:
/* Force to external trigger 0. */
if (cmd->stop_arg & ~CR_FLAGS_MASK) {
cmd->stop_arg =
COMBINE(cmd->stop_arg, 0, ~CR_FLAGS_MASK);
err |= -EINVAL;
}
/* The only flag allowed is CR_EDGE, which is ignored. */
if (cmd->stop_arg & CR_FLAGS_MASK & ~CR_EDGE) {
cmd->stop_arg =
COMBINE(cmd->stop_arg, 0, CR_FLAGS_MASK & ~CR_EDGE);
}
break;
case TRIG_NONE:
err |= comedi_check_trigger_arg_is(&cmd->stop_arg, 0);
break;
}
if (err)
return 3;
/* Step 4: fix up any arguments. */
if (cmd->scan_begin_src == TRIG_TIMER) {
arg = cmd->scan_begin_arg;
/* Use two timers. */
comedi_8254_cascade_ns_to_timer(dev->pacer, &arg, cmd->flags);
err |= comedi_check_trigger_arg_is(&cmd->scan_begin_arg, arg);
}
if (err)
return 4;
/* Step 5: check channel list if it exists */
if (cmd->chanlist && cmd->chanlist_len > 0)
err |= pci224_ao_check_chanlist(dev, s, cmd);
if (err)
return 5;
return 0;
}
static void pci224_ao_start_pacer(struct comedi_device *dev,
struct comedi_subdevice *s)
{
struct pci224_private *devpriv = dev->private;
/*
* The output of timer Z2-0 will be used as the scan trigger
* source.
*/
/* Make sure Z2-0 is gated on. */
outb(pci224_gat_config(0, GAT_VCC), devpriv->iobase1 + PCI224_ZGAT_SCE);
/* Cascading with Z2-2. */
/* Make sure Z2-2 is gated on. */
outb(pci224_gat_config(2, GAT_VCC), devpriv->iobase1 + PCI224_ZGAT_SCE);
/* Z2-2 needs 10 MHz clock. */
outb(pci224_clk_config(2, CLK_10MHZ),
devpriv->iobase1 + PCI224_ZCLK_SCE);
/* Z2-0 is clocked from Z2-2's output. */
outb(pci224_clk_config(0, CLK_OUTNM1),
devpriv->iobase1 + PCI224_ZCLK_SCE);
comedi_8254_pacer_enable(dev->pacer, 2, 0, false);
}
static int pci224_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
const struct pci224_board *board = dev->board_ptr;
struct pci224_private *devpriv = dev->private;
struct comedi_cmd *cmd = &s->async->cmd;
int range;
unsigned int i, j;
unsigned int ch;
unsigned int rank;
unsigned long flags;
/* Cannot handle null/empty chanlist. */
if (!cmd->chanlist || cmd->chanlist_len == 0)
return -EINVAL;
/* Determine which channels are enabled and their load order. */
devpriv->ao_enab = 0;
for (i = 0; i < cmd->chanlist_len; i++) {
ch = CR_CHAN(cmd->chanlist[i]);
devpriv->ao_enab |= 1U << ch;
rank = 0;
for (j = 0; j < cmd->chanlist_len; j++) {
if (CR_CHAN(cmd->chanlist[j]) < ch)
rank++;
}
devpriv->ao_scan_order[rank] = i;
}
/* Set enabled channels. */
outw(devpriv->ao_enab, dev->iobase + PCI224_DACCEN);
/* Determine range and polarity. All channels the same. */
range = CR_RANGE(cmd->chanlist[0]);
/*
* Set DAC range and polarity.
* Set DAC scan trigger source to 'none'.
* Set DAC FIFO interrupt trigger level to 'not half full'.
* Reset DAC FIFO.
*
* N.B. DAC FIFO interrupts are currently disabled.
*/
devpriv->daccon =
COMBINE(devpriv->daccon,
board->ao_hwrange[range] | PCI224_DACCON_TRIG_NONE |
PCI224_DACCON_FIFOINTR_NHALF,
PCI224_DACCON_POLAR_MASK | PCI224_DACCON_VREF_MASK |
PCI224_DACCON_TRIG_MASK | PCI224_DACCON_FIFOINTR_MASK);
outw(devpriv->daccon | PCI224_DACCON_FIFORESET,
dev->iobase + PCI224_DACCON);
if (cmd->scan_begin_src == TRIG_TIMER) {
comedi_8254_update_divisors(dev->pacer);
pci224_ao_start_pacer(dev, s);
}
spin_lock_irqsave(&devpriv->ao_spinlock, flags);
if (cmd->start_src == TRIG_INT) {
s->async->inttrig = pci224_ao_inttrig_start;
} else { /* TRIG_EXT */
/* Enable external interrupt trigger to start acquisition. */
devpriv->intsce |= PCI224_INTR_EXT;
outb(devpriv->intsce, devpriv->iobase1 + PCI224_INT_SCE);
}
spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
return 0;
}
/*
* 'cancel' function for AO subdevice.
*/
static int pci224_ao_cancel(struct comedi_device *dev,
struct comedi_subdevice *s)
{
pci224_ao_stop(dev, s);
return 0;
}
/*
* 'munge' data for AO command.
*/
static void
pci224_ao_munge(struct comedi_device *dev, struct comedi_subdevice *s,
void *data, unsigned int num_bytes, unsigned int chan_index)
{
const struct pci224_board *board = dev->board_ptr;
struct comedi_cmd *cmd = &s->async->cmd;
unsigned short *array = data;
unsigned int length = num_bytes / sizeof(*array);
unsigned int offset;
unsigned int shift;
unsigned int i;
/* The hardware expects 16-bit numbers. */
shift = 16 - board->ao_bits;
/* Channels will be all bipolar or all unipolar. */
if ((board->ao_hwrange[CR_RANGE(cmd->chanlist[0])] &
PCI224_DACCON_POLAR_MASK) == PCI224_DACCON_POLAR_UNI) {
/* Unipolar */
offset = 0;
} else {
/* Bipolar */
offset = 32768;
}
/* Munge the data. */
for (i = 0; i < length; i++)
array[i] = (array[i] << shift) - offset;
}
/*
* Interrupt handler.
*/
static irqreturn_t pci224_interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
struct pci224_private *devpriv = dev->private;
struct comedi_subdevice *s = dev->write_subdev;
struct comedi_cmd *cmd;
unsigned char intstat, valid_intstat;
unsigned char curenab;
int retval = 0;
unsigned long flags;
intstat = inb(devpriv->iobase1 + PCI224_INT_SCE) & 0x3F;
if (intstat) {
retval = 1;
spin_lock_irqsave(&devpriv->ao_spinlock, flags);
valid_intstat = devpriv->intsce & intstat;
/* Temporarily disable interrupt sources. */
curenab = devpriv->intsce & ~intstat;
outb(curenab, devpriv->iobase1 + PCI224_INT_SCE);
devpriv->intr_running = 1;
devpriv->intr_cpuid = THISCPU;
spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
if (valid_intstat) {
cmd = &s->async->cmd;
if (valid_intstat & PCI224_INTR_EXT) {
devpriv->intsce &= ~PCI224_INTR_EXT;
if (cmd->start_src == TRIG_EXT)
pci224_ao_start(dev, s);
else if (cmd->stop_src == TRIG_EXT)
pci224_ao_stop(dev, s);
}
if (valid_intstat & PCI224_INTR_DAC)
pci224_ao_handle_fifo(dev, s);
}
/* Reenable interrupt sources. */
spin_lock_irqsave(&devpriv->ao_spinlock, flags);
if (curenab != devpriv->intsce) {
outb(devpriv->intsce,
devpriv->iobase1 + PCI224_INT_SCE);
}
devpriv->intr_running = 0;
spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
}
return IRQ_RETVAL(retval);
}
static int
pci224_auto_attach(struct comedi_device *dev, unsigned long context_model)
{
struct pci_dev *pci_dev = comedi_to_pci_dev(dev);
const struct pci224_board *board = NULL;
struct pci224_private *devpriv;
struct comedi_subdevice *s;
unsigned int irq;
int ret;
if (context_model < ARRAY_SIZE(pci224_boards))
board = &pci224_boards[context_model];
if (!board || !board->name) {
dev_err(dev->class_dev,
"amplc_pci224: BUG! cannot determine board type!\n");
return -EINVAL;
}
dev->board_ptr = board;
dev->board_name = board->name;
dev_info(dev->class_dev, "amplc_pci224: attach pci %s - %s\n",
pci_name(pci_dev), dev->board_name);
devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv));
if (!devpriv)
return -ENOMEM;
ret = comedi_pci_enable(dev);
if (ret)
return ret;
spin_lock_init(&devpriv->ao_spinlock);
devpriv->iobase1 = pci_resource_start(pci_dev, 2);
dev->iobase = pci_resource_start(pci_dev, 3);
irq = pci_dev->irq;
/* Allocate buffer to hold values for AO channel scan. */
devpriv->ao_scan_vals = kmalloc_array(board->ao_chans,
sizeof(devpriv->ao_scan_vals[0]),
GFP_KERNEL);
if (!devpriv->ao_scan_vals)
return -ENOMEM;
/* Allocate buffer to hold AO channel scan order. */
devpriv->ao_scan_order =
kmalloc_array(board->ao_chans,
sizeof(devpriv->ao_scan_order[0]),
GFP_KERNEL);
if (!devpriv->ao_scan_order)
return -ENOMEM;
/* Disable interrupt sources. */
devpriv->intsce = 0;
outb(0, devpriv->iobase1 + PCI224_INT_SCE);
/* Initialize the DAC hardware. */
outw(PCI224_DACCON_GLOBALRESET, dev->iobase + PCI224_DACCON);
outw(0, dev->iobase + PCI224_DACCEN);
outw(0, dev->iobase + PCI224_FIFOSIZ);
devpriv->daccon = PCI224_DACCON_TRIG_SW | PCI224_DACCON_POLAR_BI |
PCI224_DACCON_FIFOENAB | PCI224_DACCON_FIFOINTR_EMPTY;
outw(devpriv->daccon | PCI224_DACCON_FIFORESET,
dev->iobase + PCI224_DACCON);
dev->pacer = comedi_8254_init(devpriv->iobase1 + PCI224_Z2_BASE,
I8254_OSC_BASE_10MHZ, I8254_IO8, 0);
if (!dev->pacer)
return -ENOMEM;
ret = comedi_alloc_subdevices(dev, 1);
if (ret)
return ret;
s = &dev->subdevices[0];
/* Analog output subdevice. */
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITABLE | SDF_GROUND | SDF_CMD_WRITE;
s->n_chan = board->ao_chans;
s->maxdata = (1 << board->ao_bits) - 1;
s->range_table = board->ao_range;
s->insn_write = pci224_ao_insn_write;
s->len_chanlist = s->n_chan;
dev->write_subdev = s;
s->do_cmd = pci224_ao_cmd;
s->do_cmdtest = pci224_ao_cmdtest;
s->cancel = pci224_ao_cancel;
s->munge = pci224_ao_munge;
ret = comedi_alloc_subdev_readback(s);
if (ret)
return ret;
if (irq) {
ret = request_irq(irq, pci224_interrupt, IRQF_SHARED,
dev->board_name, dev);
if (ret < 0) {
dev_err(dev->class_dev,
"error! unable to allocate irq %u\n", irq);
return ret;
}
dev->irq = irq;
}
return 0;
}
static void pci224_detach(struct comedi_device *dev)
{
struct pci224_private *devpriv = dev->private;
comedi_pci_detach(dev);
if (devpriv) {
kfree(devpriv->ao_scan_vals);
kfree(devpriv->ao_scan_order);
}
}
static struct comedi_driver amplc_pci224_driver = {
.driver_name = "amplc_pci224",
.module = THIS_MODULE,
.detach = pci224_detach,
.auto_attach = pci224_auto_attach,
.board_name = &pci224_boards[0].name,
.offset = sizeof(struct pci224_board),
.num_names = ARRAY_SIZE(pci224_boards),
};
static int amplc_pci224_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
return comedi_pci_auto_config(dev, &lc_pci224_driver,
id->driver_data);
}
static const struct pci_device_id amplc_pci224_pci_table[] = {
{ PCI_VDEVICE(AMPLICON, 0x0007), pci224_model },
{ PCI_VDEVICE(AMPLICON, 0x0008), pci234_model },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, amplc_pci224_pci_table);
static struct pci_driver amplc_pci224_pci_driver = {
.name = "amplc_pci224",
.id_table = amplc_pci224_pci_table,
.probe = amplc_pci224_pci_probe,
.remove = comedi_pci_auto_unconfig,
};
module_comedi_pci_driver(amplc_pci224_driver, amplc_pci224_pci_driver);
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi driver for Amplicon PCI224 and PCI234 AO boards");
MODULE_LICENSE("GPL");