/*
 * Copyright (C) 2014 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

/dts-v1/;

#include "imx6sx.dtsi"

/ {
	model = "Freescale i.MX6 SoloX 19x19 ARM2 Board";
	compatible = "fsl,imx6sx-19x19-arm2", "fsl,imx6sx";

	backlight {
		compatible = "pwm-backlight";
		pwms = <&pwm3 0 5000000>;
		brightness-levels = <0 4 8 16 32 64 128 255>;
		default-brightness-level = <6>;
	};

	csi1_v4l2_cap {
		compatible = "fsl,imx6sx-csi-v4l2", "fsl,imx6sl-csi-v4l2";
		csi_id = <0>;
		status = "okay";
	};

	csi2_v4l2_cap {
		compatible = "fsl,imx6sx-csi-v4l2", "fsl,imx6sl-csi-v4l2";
		csi_id = <1>;
		status = "okay";
	};

	hannstar_cabc {
		compatible = "hannstar,cabc";

		lvds0 {
			gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
		};
	};

	clocks {
	        codec_osc: codec_osc {
		        #clock-cells = <0>;
		        compatible = "fixed-clock";
		        clock-frequency = <12000000>;
		};
	};

	max7322_reset: max7322-reset {
		compatible = "gpio-reset";
		reset-gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;
		reset-delay-us = <1>;
		#reset-cells = <0>;
	};

	pxp_v4l2_out {
		compatible = "fsl,imx6sx-pxp-v4l2", "fsl,imx6sl-pxp-v4l2";
		status = "okay";
	};

	regulators {
		compatible = "simple-bus";

		reg_3p3v: 3p3v {
			compatible = "regulator-fixed";
			regulator-name = "3P3V";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
		};

		reg_usb_otg1_vbus: usb_otg1_vbus {
			compatible = "regulator-fixed";
			regulator-name = "usb_otg1_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio1 9 0>;
			enable-active-high;
		};
	};

	memory {
		reg = <0x80000000 0x40000000>;
	};

	sound-cs42888 {
		compatible = "fsl,imx6-sabreauto-cs42888",
				"fsl,imx-audio-cs42888";
		model = "imx-cs42888";
		esai-controller = <&esai>;
		asrc-controller = <&asrc_p2p>;
		audio-codec = <&cs42888>;
	};
};

&esai {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_esai_1>;
	status = "okay";
};

&cpu0 {
	arm-supply = <&sw1a_reg>;
	soc-supply = <&sw1c_reg>;
	pu-supply = <&pu_dummy>;
};

&csi1 {
	status = "okay";
};

&csi2 {
	status = "okay";
};

&fec1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet1_1>;
	phy-mode = "rgmii";
	phy-id = <1>;
	fsl,num_tx_queues=<3>;
	fsl,num_rx_queues=<3>;
	pinctrl-assert-gpios = <&max7322_1 0 GPIO_ACTIVE_HIGH>;
	fsl,magic-packet;
	status = "okay";
};

&fec2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet2_1>;
	phy-mode = "rgmii";
	phy-id = <0>;
	fsl,num_tx_queues=<3>;
	fsl,num_rx_queues=<3>;
	pinctrl-assert-gpios = <&max7322_2 0 GPIO_ACTIVE_HIGH>;
	fsl,magic-packet;
	status = "okay";
};

&gpc {
	fsl,cpu_pupscr_sw2iso = <0x2>;
	fsl,cpu_pupscr_sw = <0x1>;
	fsl,cpu_pdnscr_iso2sw = <0x1>;
	fsl,cpu_pdnscr_iso = <0x1>;
	fsl,wdog-reset = <1>; /* watchdog select of reset source */
	fsl,ldo-bypass = <1>; /* use ldo-bypass, u-boot will check it and configure */
};

&i2c1 {
        clock-frequency = <100000>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_i2c1_1>;
        status = "okay";

	pmic: pfuze100@08 {
		compatible = "fsl,pfuze100";
		reg = <0x08>;

		regulators {
			sw1a_reg: sw1ab {
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <1875000>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <6250>;
			};

			sw1c_reg: sw1c {
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <1875000>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <6250>;
			};

			sw2_reg: sw2 {
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <3300000>;
				regulator-boot-on;
				regulator-always-on;
			};

			sw3a_reg: sw3a {
				regulator-min-microvolt = <400000>;
				regulator-max-microvolt = <1975000>;
				regulator-boot-on;
				regulator-always-on;
			};

			sw3b_reg: sw3b {
				regulator-min-microvolt = <400000>;
				regulator-max-microvolt = <1975000>;
				regulator-boot-on;
				regulator-always-on;
			};

			sw4_reg: sw4 {
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <3300000>;
			};

			swbst_reg: swbst {
				regulator-min-microvolt = <5000000>;
				regulator-max-microvolt = <5150000>;
			};

			snvs_reg: vsnvs {
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <3000000>;
				regulator-boot-on;
				regulator-always-on;
			};

			vref_reg: vrefddr {
				regulator-boot-on;
				regulator-always-on;
			};

			vgen1_reg: vgen1 {
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1550000>;
			};

			vgen2_reg: vgen2 {
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1550000>;
			};

			vgen3_reg: vgen3 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vgen4_reg: vgen4 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vgen5_reg: vgen5 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vgen6_reg: vgen6 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};
		};
	};
};

&i2c2 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2_1>;
	status = "okay";

	max7322_1: gpio@68 {
		compatible = "maxim,max7322";
		reg = <0x68>;
		gpio-controller;
		#gpio-cells = <2>;
		resets = <&max7322_reset>;
	};

	max7322_2: gpio@69 {
		compatible = "maxim,max7322";
		reg = <0x69>;
		gpio-controller;
		#gpio-cells = <2>;
		resets = <&max7322_reset>;
	};

	ov564x: ov564x@3c {
		compatible = "ovti,ov564x";
		reg = <0x3c>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_csi_1>;
		clocks = <&clks IMX6SX_CLK_CSI>;
		clock-names = "csi_mclk";
		AVDD-supply = <&vgen3_reg>;  /* 2.8v */
		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
		pwn-gpios = <&gpio3 26 1>;
		rst-gpios = <&gpio3 25 0>;
		csi_id = <0>;
		mclk = <24000000>;
		mclk_source = <0>;
		status = "disabled";
	};
};

&i2c3 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c3_1>;
	status = "okay";
};

&i2c4 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c4_2>;
	status = "okay";

	sgtl5000: sgtl5000@0a {
		compatible = "fsl,sgtl5000";
		reg = <0x0a>;
		clocks = <&codec_osc>;
		VDDA-supply = <&vgen4_reg>;
		VDDIO-supply = <&reg_3p3v>;
	};

	cs42888: cs42888@048 {
		compatible = "cirrus,cs42888";
		reg = <0x048>;
		clocks = <&clks IMX6SX_CLK_ESAI_EXTAL>;
		clock-names = "mclk";
		VA-supply = <&reg_3p3v>;
		VD-supply = <&reg_3p3v>;
		VLS-supply = <&reg_3p3v>;
		VLC-supply = <&reg_3p3v>;
	};
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hog_1>;

	hog {
		pinctrl_hog_1: hoggrp-1 {
			fsl,pins = <
				MX6SX_PAD_SD4_DATA4__GPIO6_IO_18     0x1b0b0
				MX6SX_PAD_KEY_ROW1__GPIO2_IO_16      0x1b0b0
			 >;
		};
	};
};

&lcdif1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lcdif_dat_0
		     &pinctrl_lcdif_ctrl_0>;
	display = <&display0>;
	status = "disabled";

	display0: display {
		bits-per-pixel = <16>;
		bus-width = <24>;

		display-timings {
			native-mode = <&timing0>;
			timing0: timing0 {
				clock-frequency = <33500000>;
				hactive = <800>;
				vactive = <480>;
				hback-porch = <89>;
				hfront-porch = <164>;
				vback-porch = <23>;
				vfront-porch = <10>;
				hsync-len = <10>;
				vsync-len = <10>;
				hsync-active = <0>;
				vsync-active = <0>;
				de-active = <1>;
				pixelclk-active = <0>;
			};
		};
	};
};

&lcdif2 {
	display = <&display1>;
	disp-dev = "ldb";
	status = "okay";

	display1: display {
		bits-per-pixel = <16>;
		bus-width = <18>;
	};
};

&ldb {
	status = "okay";

	lvds-channel@0 {
		fsl,data-mapping = "spwg";
		fsl,data-width = <18>;
		crtc = "lcdif2";
		status = "okay";

		display-timings {
			native-mode = <&timing1>;
			timing1: hsd100pxn1 {
				clock-frequency = <65000000>;
				hactive = <1024>;
				vactive = <768>;
				hback-porch = <220>;
				hfront-porch = <40>;
				vback-porch = <21>;
				vfront-porch = <7>;
				hsync-len = <60>;
				vsync-len = <10>;
			};
		};
	};
};

&dcic1 {
	dcic_id = <0>;
	dcic_mux = "dcic-lcdif1";
	status = "okay";
};

&dcic2 {
	dcic_id = <1>;
	dcic_mux = "dcic-lvds";
	status = "okay";
};

&pwm3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm3_0>;
	status = "okay";
};

&pxp {
	status = "okay";
};

&sai1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_sai1_1>;
	status = "disabled";
};

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1_1>;
	status = "okay";
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2_1>;
	status = "okay";
};

&gpmi {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_gpmi_nand_1>;
	status = "okay"; /* pin conflict with qspi*/
};

&qspi2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_qspi2_1>;
	status = "disabled";

	flash0: n25q256a@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "micron,n25q256a";
		spi-max-frequency = <53000000>;
		reg = <0>;
	};

	flash1: n25q256a@1 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "micron,n25q256a";
		spi-max-frequency = <53000000>;
		reg = <1>;
	};
};

&usbh {
	pinctrl-names = "idle", "active";
	pinctrl-0 = <&pinctrl_usbh_1>;
	pinctrl-1 = <&pinctrl_usbh_2>;
	osc-clkgate-delay = <0x3>;
	pad-supply = <&vgen1_reg>;
	status = "okay";
};

&usbotg1 {
	vbus-supply = <&reg_usb_otg1_vbus>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg1_1>;
	disable-over-current;
	status = "okay";
};

&usdhc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc1_1>;
	bus-width = <4>;
	keep-power-in-suspend;
	enable-sdio-wakeup;
	no-1-8-v;
	status = "okay";
};

&weim {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_weim_nor_1 &pinctrl_weim_cs0_1>;
	#address-cells = <2>;
	#size-cells = <1>;
	ranges = <0 0 0x50000000 0x08000000>;
	status = "disabled"; /* pin conflict with qspi, nand and lcd1 */

	nor@0,0 {
		compatible = "cfi-flash";
		reg = <0 0 0x02000000>;
		#address-cells = <1>;
		#size-cells = <1>;
		bank-width = <2>;
		fsl,weim-cs-timing = <0x00610081 0x00000001 0x1c022000
				0x0000c000 0x1404a38e 0x00000000>;
	};
};

&vadc {
	vadc_in = <0>;
	csi_id = <1>;
	status = "okay";
};