config SND_SOC_TEGRA tristate "SoC Audio for the Tegra System-on-Chip" depends on ARCH_TEGRA && TEGRA_SYSTEM_DMA help Say Y or M here if you want support for SoC audio on Tegra. config SND_SOC_TEGRA20_AC97 tristate "Tegra 20 AC97 driver" select AC97_BUS select SND_AC97_CODEC select SND_SOC_AC97_BUS select SND_SOC_TEGRA20_DAS help Say Y or M if you want to add support for codecs attached to the Tegra AC97 interface. You will also need to select the individual machine drivers to support below. config SND_SOC_TEGRA20_DAS tristate "Tegra 20 Digital Audio Switch driver" depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC config SND_SOC_TEGRA20_I2S tristate "Tegra 20 I2S driver" depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA20_DAS help Say Y or M if you want to add support for codecs attached to the Tegra I2S interface. You will also need to select the individual machine drivers to support below. config SND_SOC_TEGRA30_AHUB tristate "Tegra 30 Audio Hub driver" depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC config SND_SOC_TEGRA30_DAM tristate "Tegra 30 Audio Dam driver" depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC select SND_SOC_TEGRA30_AHUB config SND_SOC_TEGRA30_I2S tristate "Tegra 30 I2S driver" depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC select SND_SOC_TEGRA30_AHUB help Say Y or M if you want to add support for codecs attached to the Tegra I2S interface. You will also need to select the individual machine drivers to support below. config SND_SOC_TEGRA20_SPDIF tristate depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC && TEGRA_DC default m help Say Y or M if you want to add support for the TEGRA20 SPDIF interface. You will also need to select the individual machine drivers to support below. config SND_SOC_TEGRA30_SPDIF tristate depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC && TEGRA_DC select SND_SOC_TEGRA30_AHUB help Say Y or M if you want to add support for the TEGRA30 SPDIF interface. You will also need to select the individual machine drivers to support below. config MACH_HAS_SND_SOC_TEGRA_WM8903 bool help Machines that use the SND_SOC_TEGRA_WM8903 driver should select this config option, in order to allow the user to enable SND_SOC_TEGRA_WM8903. config SND_SOC_TEGRA_WM8903 tristate "SoC Audio support for Tegra boards using a WM8903 codec" depends on SND_SOC_TEGRA && I2C && TEGRA_DC depends on MACH_HAS_SND_SOC_TEGRA_WM8903 select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_TEGRA20_SPDIF if ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_SPDIF if ARCH_TEGRA_3x_SOC select SND_SOC_WM8903 select SND_SOC_SPDIF select SND_SOC_TEGRA30_DAM if ARCH_TEGRA_3x_SOC help Say Y or M here if you want to add support for SoC audio on Tegra boards using the WM8093 codec. Currently, the supported boards are Harmony, Ventana, Seaboard, Kaen, and Aebl. config SND_SOC_TEGRA_COLIBRI_T20 tristate "SoC Audio support for Colibri T20 module" depends on SND_SOC_TEGRA && MACH_COLIBRI_T20 select SND_SOC_SPDIF select SND_SOC_TEGRA20_AC97 select SND_SOC_TEGRA20_SPDIF select SND_SOC_WM9712 help Say Y or M here if you want to add support for SoC audio on the Toradex Colibri T20 module. config SND_SOC_TEGRA_COLIBRI_T30 tristate "SoC Audio support for Apalis/Colibri T30 modules" depends on I2C && (MACH_APALIS_T30 || MACH_COLIBRI_T30) && SND_SOC_TEGRA select SND_SOC_SGTL5000 select SND_SOC_SPDIF select SND_SOC_TEGRA30_DAM select SND_SOC_TEGRA30_I2S select SND_SOC_TEGRA30_SPDIF help Say Y or M here if you want to add support for SoC audio on the Toradex Apalis/Colibri T30 modules. config SND_SOC_TEGRA_TRIMSLICE tristate "SoC Audio support for TrimSlice board" depends on SND_SOC_TEGRA && MACH_TRIMSLICE && I2C select SND_SOC_TEGRA_I2S select SND_SOC_TLV320AIC23 help Say Y or M here if you want to add support for SoC audio on the TrimSlice platform. config SND_SOC_TEGRA_P1852 tristate "SoC Audio support for P1852 SKUs" depends on SND_SOC_TEGRA depends on MACH_P1852 select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_TEGRA30_SPDIF if ARCH_TEGRA_3x_SOC select SND_SOC_SPDIF select SND_SOC_TEGRA30_DAM if ARCH_TEGRA_3x_SOC help Say Y or M here if you want to add support for SoC audio on the TEGRA P1852 SKUs. These are plug-n-play boards and and the codecs used by the system integrator needs to be provided while instantiating the driver. config MACH_HAS_SND_SOC_TEGRA_WM8753 bool help Machines that use the SND_SOC_TEGRA_WM8753 driver should select this config option, in order to allow the user to enable SND_SOC_TEGRA_WM8753. config SND_SOC_TEGRA_WM8753 tristate "SoC Audio support for Tegra boards using a WM8753 codec" depends on SND_SOC_TEGRA && I2C && TEGRA_DC depends on MACH_HAS_SND_SOC_TEGRA_WM8753 select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_TEGRA20_SPDIF if ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_SPDIF if ARCH_TEGRA_3x_SOC select SND_SOC_WM8753 select SND_SOC_SPDIF help Say Y or M here if you want to add support for SoC audio on Tegra boards using the WM8753 codec. Currently, only supported board is Whistler. config MACH_HAS_SND_SOC_TEGRA_MAX98088 bool help Machines that use the SND_SOC_TEGRA_MAX98088 driver should select this config option, in order to allow the user to enable SND_SOC_TEGRA_MAX98088. config SND_SOC_TEGRA_MAX98088 tristate "SoC Audio support for Tegra boards using a MAX98088 codec" depends on SND_SOC_TEGRA && I2C && TEGRA_DC depends on MACH_HAS_SND_SOC_TEGRA_MAX98088 select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_TEGRA30_SPDIF if ARCH_TEGRA_3x_SOC select SND_SOC_MAX98088 select SND_SOC_SPDIF select SND_SOC_TEGRA30_DAM if ARCH_TEGRA_3x_SOC help Say Y or M here if you want to add support for SoC audio on Tegra boards using the MAX98088 codec. Currently, only supported board is Enterprise. config MACH_HAS_SND_SOC_TEGRA_TLV320AIC326X bool help Machines that use the SND_SOC_TEGRA_TLV320AIC326X driver should select this config option, in order to allow the user to enable SND_SOC_TEGRA_TLV320AIC326X. config SND_SOC_TEGRA_TLV320AIC326X tristate "SoC Audio support for Tegra boards using a TI AIC326x codec" depends on SND_SOC_TEGRA && I2C && TEGRA_DC depends on MACH_HAS_SND_SOC_TEGRA_TLV320AIC326X select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_TEGRA30_SPDIF if ARCH_TEGRA_3x_SOC select SND_SOC_TLV320AIC326X select SND_SOC_SPDIF select SND_SOC_TEGRA30_DAM if ARCH_TEGRA_3x_SOC help Say Y or M here if you want to add support for SoC audio on Tegra boards using the TI AIC326X codec. config MACH_HAS_SND_SOC_TEGRA_RT5639 bool help Machines that use the SND_SOC_TEGRA_RT5639 driver should select this config option, in order to allow the user to enable SND_SOC_TEGRA_RT5639. config SND_SOC_TEGRA_RT5639 tristate "SoC Audio support for Tegra boards using a ALC5639 codec" depends on SND_SOC_TEGRA && I2C && TEGRA_DC depends on MACH_HAS_SND_SOC_TEGRA_RT5639 depends on SND_SOC_TEGRA_RT5640 select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_TEGRA30_SPDIF if ARCH_TEGRA_3x_SOC select SND_SOC_RT5639 select SND_SOC_SPDIF select SND_SOC_TEGRA30_DAM if ARCH_TEGRA_3x_SOC help Say Y or M here if you want to add support for SoC audio on Tegra boards using the ALC5639 codec. Currently, the supported board is Kai. config MACH_HAS_SND_SOC_TEGRA_RT5640 bool help Machines that use the SND_SOC_TEGRA_RT5640 driver should select this config option, in order to allow the user to enable SND_SOC_TEGRA_RT5640. config SND_SOC_TEGRA_RT5640 tristate "SoC Audio support for Tegra boards using a ALC5640 codec" depends on SND_SOC_TEGRA && I2C && TEGRA_DC depends on MACH_HAS_SND_SOC_TEGRA_RT5640 select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_TEGRA30_SPDIF if ARCH_TEGRA_3x_SOC select SND_SOC_RT5640 select SND_SOC_RT5639 select SND_SOC_SPDIF select SND_SOC_TEGRA30_DAM if ARCH_TEGRA_3x_SOC help Say Y or M here if you want to add support for SoC audio on Tegra boards using the ALC5640 codec. Currently, the supported boards are Kai and Cardhu. config MACH_HAS_SND_SOC_TEGRA_MAX98095 bool help Machines that use the SND_SOC_TEGRA_MAX98095 driver should select this config option, in order to allow the user to enable SND_SOC_TEGRA_MAX98095. config SND_SOC_TEGRA_MAX98095 tristate "SoC Audio support for Tegra boards using a MAX98095 codec" depends on SND_SOC_TEGRA && I2C && TEGRA_DC depends on MACH_HAS_SND_SOC_TEGRA_MAX98095 select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_TEGRA30_SPDIF if ARCH_TEGRA_3x_SOC select SND_SOC_MAX98095 select SND_SOC_SPDIF select SND_SOC_TEGRA30_DAM if ARCH_TEGRA_3x_SOC help Say Y or M here if you want to add support for SoC audio on Tegra boards using the MAX98095 codec. Currently, only supported board is Cardhu.