blob: 51945e0fa957e052b4fcf177ce3530fed3d6cfcf (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
|
/*
* Copyright (C) 2005-2012 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef __ASM_ARCH_MXC_ARC_OTG_H__
#define __ASM_ARCH_MXC_ARC_OTG_H__
#ifdef CONFIG_ARCH_MX3
extern volatile u32 *mx3_usb_otg_addr;
#define OTG_BASE_ADDR mx3_usb_otg_addr
#else
extern void __iomem *imx_otg_base;
#define OTG_BASE_ADDR imx_otg_base
#endif
#ifdef CONFIG_ARCH_MVF
#define USB_OTGREGS_BASE MVF_IO_ADDRESS(0x40034000)
#define USB_OTG2REGS_BASE MVF_IO_ADDRESS(0x400B4000)
#define USB_H1REGS_BASE MVF_IO_ADDRESS(0x400B4000)
/* dummy h2regs for MVF */
#define USB_H2REGS_BASE MVF_IO_ADDRESS(0x400B4000)
#define USBC0_OTHERREGS_BASE MVF_IO_ADDRESS(0x40034800)
#define USBC1_OTHERREGS_BASE MVF_IO_ADDRESS(0x400B4800)
#define USB_OTHERREGS_BASE USBC0_OTHERREGS_BASE
#else
#define USB_OTGREGS_BASE (OTG_BASE_ADDR + 0x000)
#define USB_H1REGS_BASE (OTG_BASE_ADDR + 0x200)
#define USB_H2REGS_BASE (OTG_BASE_ADDR + 0x400)
#if (defined CONFIG_ARCH_MX5 | defined CONFIG_ARCH_MX6)
#define USB_H3REGS_BASE (OTG_BASE_ADDR + 0x600)
#define USB_OTHERREGS_BASE (OTG_BASE_ADDR + 0x800)
#else
#define USB_OTHERREGS_BASE (OTG_BASE_ADDR + 0x600)
#endif
#endif
#define USBOTG_REG32(offset) (*((volatile u32 __force *)(USB_OTGREGS_BASE + (offset))))
#define USBOTG_REG16(offset) (*((volatile u16 __force *)(USB_OTGREGS_BASE + (offset))))
#define USBH1_REG32(offset) (*((volatile u32 __force *)(USB_H1REGS_BASE + (offset))))
#define USBH1_REG16(offset) (*((volatile u16 __force *)(USB_H1REGS_BASE + (offset))))
#define USBH2_REG32(offset) (*((volatile u32 __force *)(USB_H2REGS_BASE + (offset))))
#define USBH2_REG16(offset) (*((volatile u16 __force *)(USB_H2REGS_BASE + (offset))))
#define USBH3_REG32(offset) (*((volatile u32 __force *)(USB_H3REGS_BASE + (offset))))
#define USBH3_REG16(offset) (*((volatile u16 __force *)(USB_H3REGS_BASE + (offset))))
#define USBOTHER_REG(offset) (*((volatile u32 __force *)(USB_OTHERREGS_BASE + (offset))))
#ifdef CONFIG_ARCH_MVF
#define USBOTG2_REG32(offset) \
(*((volatile u32 __force *)(USB_OTG2REGS_BASE + (offset))))
#define USBOTG2_REG16(offset) \
(*((volatile u16 __force *)(USB_OTG2REGS_BASE + (offset))))
#define USBC0_OTHER_REG(offset) \
(*((volatile u32 __force *)(USBC0_OTHERREGS_BASE + (offset))))
#define USBC1_OTHER_REG(offset) \
(*((volatile u32 __force *)(USBC1_OTHERREGS_BASE + (offset))))
#endif
/*
* OTG registers
*/
#define UOG_ID USBOTG_REG32(0x00) /* Host ID */
#define UOG_HWGENERAL USBOTG_REG32(0x04) /* Host General */
#define UOG_HWHOST USBOTG_REG32(0x08) /* Host h/w params */
#define UOG_HWTXBUF USBOTG_REG32(0x10) /* TX buffer h/w params */
#define UOG_HWRXBUF USBOTG_REG32(0x14) /* RX buffer h/w params */
#define UOG_CAPLENGTH USBOTG_REG16(0x100) /* Capability register length */
#define UOG_HCIVERSION USBOTG_REG16(0x102) /* Host Interface version */
#define UOG_HCSPARAMS USBOTG_REG32(0x104) /* Host control structural params */
#define UOG_HCCPARAMS USBOTG_REG32(0x108) /* control capability params */
#define UOG_DCIVERSION USBOTG_REG32(0x120) /* device interface version */
/* start EHCI registers: */
#define UOG_USBCMD USBOTG_REG32(0x140) /* USB command register */
#define UOG_USBSTS USBOTG_REG32(0x144) /* USB status register */
#define UOG_USBINTR USBOTG_REG32(0x148) /* interrupt enable register */
#define UOG_FRINDEX USBOTG_REG32(0x14c) /* USB frame index */
/* segment (0x150) addr bits 63:32 if needed */
#define UOG_PERIODICLISTBASE USBOTG_REG32(0x154) /* host crtlr frame list base addr */
#define UOG_DEVICEADDR USBOTG_REG32(0x154) /* device crtlr device address */
#define UOG_ASYNCLISTADDR USBOTG_REG32(0x158) /* host ctrlr next async addr */
#define UOG_EPLISTADDR USBOTG_REG32(0x158) /* device ctrlr endpoint list addr */
#define UOG_BURSTSIZE USBOTG_REG32(0x160) /* host ctrlr embedded TT async buf status */
#define UOG_TXFILLTUNING USBOTG_REG32(0x164) /* TX FIFO fill tuning */
#define UOG_ULPIVIEW USBOTG_REG32(0x170) /* ULPI viewport */
#define UOG_CFGFLAG USBOTG_REG32(0x180) /* configflag (supports HS) */
#define UOG_PORTSC1 USBOTG_REG32(0x184) /* port status and control */
/* end EHCI registers: */
#define UOG_OTGSC USBOTG_REG32(0x1a4) /* OTG status and control */
#define UOG_USBMODE USBOTG_REG32(0x1a8) /* USB device mode */
#define UOG_ENDPTSETUPSTAT USBOTG_REG32(0x1ac) /* endpoint setup status */
#define UOG_ENDPTPRIME USBOTG_REG32(0x1b0) /* endpoint initialization */
#define UOG_ENDPTFLUSH USBOTG_REG32(0x1b4) /* endpoint de-initialize */
#define UOG_ENDPTSTAT USBOTG_REG32(0x1b8) /* endpoint status */
#define UOG_ENDPTCOMPLETE USBOTG_REG32(0x1bc) /* endpoint complete */
#define UOG_EPCTRL0 USBOTG_REG32(0x1c0) /* endpoint control0 */
#define UOG_EPCTRL1 USBOTG_REG32(0x1c4) /* endpoint control1 */
#define UOG_EPCTRL2 USBOTG_REG32(0x1c8) /* endpoint control2 */
#define UOG_EPCTRL3 USBOTG_REG32(0x1cc) /* endpoint control3 */
#define UOG_EPCTRL4 USBOTG_REG32(0x1d0) /* endpoint control4 */
#define UOG_EPCTRL5 USBOTG_REG32(0x1d4) /* endpoint control5 */
#define UOG_EPCTRL6 USBOTG_REG32(0x1d8) /* endpoint control6 */
#define UOG_EPCTRL7 USBOTG_REG32(0x1dc) /* endpoint control7 */
#ifdef CONFIG_ARCH_MVF
/*
* OTG2 registers
*/
#define UOG2_ID USBOTG2_REG32(0x00) /* Host ID */
#define UOG2_HWGENERAL USBOTG2_REG32(0x04) /* Host General */
#define UOG2_HWHOST USBOTG2_REG32(0x08) /* Host h/w params */
#define UOG2_HWTXBUF USBOTG2_REG32(0x10) /*TX buffer h/w params*/
#define UOG2_HWRXBUF USBOTG2_REG32(0x14) /*RX buffer h/w params*/
#define UOG2_CAPLENGTH USBOTG2_REG16(0x100) /*Capability reg length*/
#define UOG2_HCIVERSION USBOTG2_REG16(0x102) /*Host Interface version*/
#define UOG2_HCSPARAMS USBOTG2_REG32(0x104) /*Host ctrl struct parm*/
#define UOG2_HCCPARAMS USBOTG2_REG32(0x108) /*ctrl capability params*/
#define UOG2_DCIVERSION USBOTG2_REG32(0x120) /*device interface ver*/
/* start EHCI registers: */
#define UOG2_USBCMD USBOTG2_REG32(0x140) /* USB command register */
#define UOG2_USBSTS USBOTG2_REG32(0x144) /* USB status register */
#define UOG2_USBINTR USBOTG2_REG32(0x148) /* interrupt enable reg */
#define UOG2_FRINDEX USBOTG2_REG32(0x14c) /* USB frame index */
#define UOG2_PERIODICLISTBASE USBOTG2_REG32(0x154) /* host list base addr */
#define UOG2_DEVICEADDR USBOTG2_REG32(0x154) /* device crtlr address */
#define UOG2_ASYNCLISTADDR USBOTG2_REG32(0x158) /* host next async addr */
#define UOG2_EPLISTADDR USBOTG2_REG32(0x158) /* device ep list addr */
#define UOG2_BURSTSIZE USBOTG2_REG32(0x160) /* host TT async buf sts*/
#define UOG2_TXFILLTUNING USBOTG2_REG32(0x164) /* TX FIFO fill tuning */
#define UOG2_ULPIVIEW USBOTG2_REG32(0x170) /* ULPI viewport */
#define UOG2_CFGFLAG USBOTG2_REG32(0x180) /* cfgflg (supports HS) */
#define UOG2_PORTSC1 USBOTG2_REG32(0x184) /* port status and ctrl */
/* end EHCI registers: */
#define UOG2_OTGSC USBOTG2_REG32(0x1a4) /* OTG status and ctrl */
#define UOG2_USBMODE USBOTG2_REG32(0x1a8) /* USB device mode */
#define UOG2_ENDPTSETUPSTAT USBOTG2_REG32(0x1ac) /* ep setup status */
#define UOG2_ENDPTPRIME USBOTG2_REG32(0x1b0) /* ep initialization */
#define UOG2_ENDPTFLUSH USBOTG2_REG32(0x1b4) /* ep de-initialize */
#define UOG2_ENDPTSTAT USBOTG2_REG32(0x1b8) /* endpoint status */
#define UOG2_ENDPTCOMPLETE USBOTG2_REG32(0x1bc) /* endpoint complete */
#define UOG2_EPCTRL0 USBOTG2_REG32(0x1c0) /* endpoint control0 */
#define UOG2_EPCTRL1 USBOTG2_REG32(0x1c4) /* endpoint control1 */
#define UOG2_EPCTRL2 USBOTG2_REG32(0x1c8) /* endpoint control2 */
#define UOG2_EPCTRL3 USBOTG2_REG32(0x1cc) /* endpoint control3 */
#define UOG2_EPCTRL4 USBOTG2_REG32(0x1d0) /* endpoint control4 */
#define UOG2_EPCTRL5 USBOTG2_REG32(0x1d4) /* endpoint control5 */
#define UOG2_EPCTRL6 USBOTG2_REG32(0x1d8) /* endpoint control6 */
#define UOG2_EPCTRL7 USBOTG2_REG32(0x1dc) /* endpoint control7 */
#endif
/*
* Host 1 registers
*/
#define UH1_ID USBH1_REG32(0x00) /* Host ID */
#define UH1_HWGENERAL USBH1_REG32(0x04) /* Host General */
#define UH1_HWHOST USBH1_REG32(0x08) /* Host h/w params */
#define UH1_HWTXBUF USBH1_REG32(0x10) /* TX buffer h/w params */
#define UH1_HWRXBUF USBH1_REG32(0x14) /* RX buffer h/w params */
#define UH1_CAPLENGTH USBH1_REG16(0x100) /* Capability register length */
#define UH1_HCIVERSION USBH1_REG16(0x102) /* Host Interface version */
#define UH1_HCSPARAMS USBH1_REG32(0x104) /* Host control structural params */
#define UH1_HCCPARAMS USBH1_REG32(0x108) /* control capability params */
/* start EHCI registers: */
#define UH1_USBCMD USBH1_REG32(0x140) /* USB command register */
#define UH1_USBSTS USBH1_REG32(0x144) /* USB status register */
#define UH1_USBINTR USBH1_REG32(0x148) /* interrupt enable register */
#define UH1_FRINDEX USBH1_REG32(0x14c) /* USB frame index */
/* segment (0x150) addr bits 63:32 if needed */
#define UH1_PERIODICLISTBASE USBH1_REG32(0x154) /* host crtlr frame list base addr */
#define UH1_ASYNCLISTADDR USBH1_REG32(0x158) /* host ctrlr nest async addr */
#define UH1_BURSTSIZE USBH1_REG32(0x160) /* host ctrlr embedded TT async buf status */
#define UH1_TXFILLTUNING USBH1_REG32(0x164) /* TX FIFO fill tuning */
/* configured_flag (0x180) configflag (supports HS) */
#define UH1_PORTSC1 USBH1_REG32(0x184) /* port status and control */
/* end EHCI registers: */
#define UH1_USBMODE USBH1_REG32(0x1a8) /* USB device mode */
/*
* Host 2 registers
*/
#define UH2_ID USBH2_REG32(0x00) /* Host ID */
#define UH2_HWGENERAL USBH2_REG32(0x04) /* Host General */
#define UH2_HWHOST USBH2_REG32(0x08) /* Host h/w params */
#define UH2_HWTXBUF USBH2_REG32(0x10) /* TX buffer h/w params */
#define UH2_HWRXBUF USBH2_REG32(0x14) /* RX buffer h/w params */
#define UH2_CAPLENGTH USBH2_REG16(0x100) /* Capability register length */
#define UH2_HCIVERSION USBH2_REG16(0x102) /* Host Interface version */
#define UH2_HCSPARAMS USBH2_REG32(0x104) /* Host control structural params */
#define UH2_HCCPARAMS USBH2_REG32(0x108) /* control capability params */
/* start EHCI registers: */
#define UH2_USBCMD USBH2_REG32(0x140) /* USB command register */
#define UH2_USBSTS USBH2_REG32(0x144) /* USB status register */
#define UH2_USBINTR USBH2_REG32(0x148) /* interrupt enable register */
#define UH2_FRINDEX USBH2_REG32(0x14c) /* USB frame index */
/* segment (0x150) addr bits 63:32 if needed */
#define UH2_PERIODICLISTBASE USBH2_REG32(0x154) /* host crtlr frame list base addr */
#define UH2_ASYNCLISTADDR USBH2_REG32(0x158) /* host ctrlr nest async addr */
#define UH2_BURSTSIZE USBH2_REG32(0x160) /* host ctrlr embedded TT async buf status */
#define UH2_TXFILLTUNING USBH2_REG32(0x164) /* TX FIFO fill tuning */
#define UH2_ULPIVIEW USBH2_REG32(0x170) /* ULPI viewport */
/* configured_flag (0x180) configflag (supports HS) */
#define UH2_PORTSC1 USBH2_REG32(0x184) /* port status and control */
/* end EHCI registers */
#define UH2_USBMODE USBH2_REG32(0x1a8) /* USB device mode */
/*
* Host 2 registers
*/
#define UH2_ID USBH2_REG32(0x00) /* Host ID */
#define UH2_HWGENERAL USBH2_REG32(0x04) /* Host General */
#define UH2_HWHOST USBH2_REG32(0x08) /* Host h/w params */
#define UH2_HWTXBUF USBH2_REG32(0x10) /* TX buffer h/w params */
#define UH2_HWRXBUF USBH2_REG32(0x14) /* RX buffer h/w params */
#define UH2_CAPLENGTH USBH2_REG16(0x100) /* Capability register length */
#define UH2_HCIVERSION USBH2_REG16(0x102) /* Host Interface version */
#define UH2_HCSPARAMS USBH2_REG32(0x104) /* Host control structural params */
#define UH2_HCCPARAMS USBH2_REG32(0x108) /* control capability params */
/* start EHCI registers: */
#define UH2_USBCMD USBH2_REG32(0x140) /* USB command register */
#define UH2_USBSTS USBH2_REG32(0x144) /* USB status register */
#define UH2_USBINTR USBH2_REG32(0x148) /* interrupt enable register */
#define UH2_FRINDEX USBH2_REG32(0x14c) /* USB frame index */
/* segment (0x150) addr bits 63:32 if needed */
#define UH2_PERIODICLISTBASE USBH2_REG32(0x154) /* host crtlr frame list base addr */
#define UH2_ASYNCLISTADDR USBH2_REG32(0x158) /* host ctrlr nest async addr */
#define UH2_BURSTSIZE USBH2_REG32(0x160) /* host ctrlr embedded TT async buf status */
#define UH2_TXFILLTUNING USBH2_REG32(0x164) /* TX FIFO fill tuning */
#define UH2_ULPIVIEW USBH2_REG32(0x170) /* ULPI viewport */
/* configured_flag (0x180) configflag (supports HS) */
#define UH2_PORTSC1 USBH2_REG32(0x184) /* port status and control */
/* end EHCI registers */
#define UH2_USBMODE USBH2_REG32(0x1a8) /* USB device mode */
/*
* Host 2 registers
*/
#define UH3_ID USBH3_REG32(0x00) /* Host ID */
#define UH3_HWGENERAL USBH3_REG32(0x04) /* Host General */
#define UH3_HWHOST USBH3_REG32(0x08) /* Host h/w params */
#define UH3_HWTXBUF USBH3_REG32(0x10) /* TX buffer h/w params */
#define UH3_HWRXBUF USBH3_REG32(0x14) /* RX buffer h/w params */
#define UH3_CAPLENGTH USBH3_REG16(0x100) /* Capability register length */
#define UH3_HCIVERSION USBH3_REG16(0x102) /* Host Interface version */
#define UH3_HCSPARAMS USBH3_REG32(0x104) /* Host control structural params */
#define UH3_HCCPARAMS USBH3_REG32(0x108) /* control capability params */
/* start EHCI registers: */
#define UH3_USBCMD USBH3_REG32(0x140) /* USB command register */
#define UH3_USBSTS USBH3_REG32(0x144) /* USB status register */
#define UH3_USBINTR USBH3_REG32(0x148) /* interrupt enable register */
#define UH3_FRINDEX USBH3_REG32(0x14c) /* USB frame index */
/* segment (0x150) addr bits 63:32 if needed */
#define UH3_PERIODICLISTBASE USBH3_REG32(0x154) /* host crtlr frame list base addr */
#define UH3_ASYNCLISTADDR USBH3_REG32(0x158) /* host ctrlr nest async addr */
#define UH3_BURSTSIZE USBH3_REG32(0x160) /* host ctrlr embedded TT async buf status */
#define UH3_TXFILLTUNING USBH3_REG32(0x164) /* TX FIFO fill tuning */
#define UH3_ULPIVIEW USBH3_REG32(0x170) /* ULPI viewport */
/* configured_flag (0x180) configflag (supports HS) */
#define UH3_PORTSC1 USBH3_REG32(0x184) /* port status and control */
/* end EHCI registers */
#define UH3_USBMODE USBH3_REG32(0x1a8) /* USB device mode */
/*
* other regs (not part of ARC core)
*/
#define USBCTRL USBOTHER_REG(0x00) /* USB Control register */
#define USB_OTG_MIRROR USBOTHER_REG(0x04) /* USB OTG mirror register */
#define USB_PHY_CTR_FUNC USBOTHER_REG(0x08) /* OTG UTMI PHY Function Control register */
#define USB_PHY_CTR_FUNC2 USBOTHER_REG(0x0c) /* OTG UTMI PHY Function Control register */
#define USB_CTRL_1 USBOTHER_REG(0x10) /* USB Cotrol Register 1*/
#define USBCTRL_HOST2 USBOTHER_REG(0x14) /* USB Cotrol Register 1*/
#define USBCTRL_HOST3 USBOTHER_REG(0x18) /* USB Cotrol Register 1*/
#define USBH1_PHY_CTRL0 USBOTHER_REG(0x1c) /* USB Cotrol Register 1*/
#define USBH1_PHY_CTRL1 USBOTHER_REG(0x20) /* USB Cotrol Register 1*/
#define USB_CLKONOFF_CTRL USBOTHER_REG(0x24) /* USB Clock on/off Control Register */
/* MVF other regs */
#define USBC0_CTRL USBC0_OTHER_REG(0x00)
#define USBC0_PHY_CTRL_0 USBC0_OTHER_REG(0x18)
#define USBC1_CTRL USBC1_OTHER_REG(0x00)
#define USBC1_PHY_CTRL_0 USBC1_OTHER_REG(0x18)
/* mx6x other regs */
#define USB_OTG_CTRL USBOTHER_REG(0x00) /* USB OTG Control register */
#define USB_H1_CTRL USBOTHER_REG(0x04) /* USB H1 Control register */
#define USB_H2_CTRL USBOTHER_REG(0x08) /* USB H2 Control register */
#define USB_H3_CTRL USBOTHER_REG(0x0c) /* USB H3 Control register */
#define USB_UH2_HSIC_CTRL USBOTHER_REG(0x10) /* USB Host2 HSIC Control Register */
#define USB_UH3_HSIC_CTRL USBOTHER_REG(0x14) /* USB Host3 HSIC Control Register */
#define USB_OTG_PHY_CTRL_0 USBOTHER_REG(0x18) /* OTG UTMI PHY Control 0 Register */
#define USB_H1_PHY_CTRL_0 USBOTHER_REG(0x1c) /* OTG UTMI PHY Control 1 Register */
#define USB_UH2_HSIC_DLL_CFG1 USBOTHER_REG(0x20) /* USB Host2 HSIC DLL Configuration Register 1 */
#define USB_UH2_HSIC_DLL_CFG2 USBOTHER_REG(0x24) /* USB Host2 HSIC DLL Configuration Register 2 */
#define USB_UH2_HSIC_DLL_CFG3 USBOTHER_REG(0x28) /* USB Host2 HSIC DLL Configuration Register 3 */
#define USB_UH3_HSIC_DLL_CFG1 USBOTHER_REG(0x30) /* USB Host3 HSIC DLL Configuration Register 1 */
#define USB_UH3_HSIC_DLL_CFG2 USBOTHER_REG(0x34) /* USB Host3 HSIC DLL Configuration Register 2 */
#define USB_UH3_HSIC_DLL_CFG3 USBOTHER_REG(0x38) /* USB Host3 HSIC DLL Configuration Register 3 */
/*
* register bits
*/
/* x_PORTSCx */
#define PORTSC_PTS_MASK (3 << 30) /* parallel xcvr select mask */
#define PORTSC_PTS_UTMI (0 << 30) /* UTMI/UTMI+ */
#define PORTSC_PTS_PHILIPS (1 << 30) /* Philips classic */
#define PORTSC_PTS_ULPI (2 << 30) /* ULPI */
#define PORTSC_PTS_SERIAL (3 << 30) /* serial */
#define PORTSC_STS (1 << 29) /* serial xcvr select */
#define PORTSC_PTW (1 << 28) /* UTMI width */
#define PORTSC_HSIC_MODE (1 << 25) /* Only for HSIC */
#define PORTSC_PHCD (1 << 23) /* Low Power Suspend */
#define PORTSC_WKDC (1 << 21) /* wakeup on discnt*/
#define PORTSC_WKCN (1 << 20) /* wakeup on connect*/
#define PORTSC_PORT_POWER (1 << 12) /* port power */
#define PORTSC_LS_MASK (3 << 10) /* Line State mask */
#define PORTSC_LS_SE0 (0 << 10) /* SE0 */
#define PORTSC_LS_K_STATE (1 << 10) /* K-state */
#define PORTSC_LS_J_STATE (2 << 10) /* J-state */
#define PORTSC_PORT_RESET (1 << 8) /* Port reset */
#define PORTSC_PORT_SUSPEND (1 << 7) /* Suspend */
#define PORTSC_PORT_FORCE_RESUME (1 << 6) /* Force port resume */
#define PORTSC_OVER_CURRENT_CHG (1 << 5) /* over current change */
#define PORTSC_OVER_CURRENT_ACT (1 << 4) /* over currrent active */
#define PORTSC_PORT_EN_DIS_CHANGE (1 << 3) /* port {en,dis}able change */
#define PORTSC_PORT_ENABLE (1 << 2) /* port enabled */
#define PORTSC_CONNECT_STATUS_CHANGE (1 << 1) /* connect status change */
#define PORTSC_CURRENT_CONNECT_STATUS (1 << 0) /* current connect status */
#define PORTSC_W1C_BITS \
(PORTSC_CONNECT_STATUS_CHANGE | \
PORTSC_PORT_EN_DIS_CHANGE | \
PORTSC_OVER_CURRENT_CHG)
/* UOG_OTGSC Register Bits */
/* control bits: */
#define OTGSC_CTRL_VBUS_DISCHARGE (1 << 0)
#define OTGSC_CTRL_VBUS_CHARGE (1 << 1)
#define OTGSC_CTRL_OTG_TERM (1 << 3) /* controls DM pulldown */
#define OTGSC_CTRL_DATA_PULSING (1 << 4)
#define OTGSC_CTRL_USB_ID_PU (1 << 5) /* enable ID pullup */
/* current status: (R/O) */
#define OTGSC_STS_USB_ID (1 << 8) /* 0=A-device 1=B-device */
#define OTGSC_STS_A_VBUS_VALID (1 << 9)
#define OTGSC_STS_A_SESSION_VALID (1 << 10)
#define OTGSC_STS_B_SESSION_VALID (1 << 11)
#define OTGSC_STS_B_SESSION_END (1 << 12)
#define OTGSC_STS_1ms_TIMER (1 << 13)
#define OTGSC_STS_DATA_PULSE (1 << 14)
/* interrupt status: (write to clear) */
#define OTGSC_IS_MASK (0x7f << 16)
#define OTGSC_IS_USB_ID (1 << 16)
#define OTGSC_IS_A_VBUS_VALID (1 << 17)
#define OTGSC_IS_A_SESSION_VALID (1 << 18)
#define OTGSC_IS_B_SESSION_VALID (1 << 19)
#define OTGSC_IS_B_SESSION_END (1 << 20)
#define OTGSC_IS_1ms_TIMER (1 << 21)
#define OTGSC_IS_DATA_PULSE (1 << 22)
/* interrupt enables: */
#define OTGSC_IE_MASK (0x7f << 24)
#define OTGSC_IE_USB_ID (1 << 24)
#define OTGSC_IE_A_VBUS_VALID (1 << 25)
#define OTGSC_IE_A_SESSION_VALID (1 << 26)
#define OTGSC_IE_B_SESSION_VALID (1 << 27)
#define OTGSC_IE_B_SESSION_END (1 << 28)
#define OTGSC_IE_1ms_TIMER (1 << 29)
#define OTGSC_IE_DATA_PULSE (1 << 30)
/* UOG_USBSTS bits */
#define USBSTS_PCI (1 << 2) /* Port Change Detect */
#define USBSTS_URI (1 << 6) /* USB Reset Received */
/* USBCMD */
#define UCMD_RUN_STOP (1 << 0) /* controller run/stop */
#define UCMD_RESET (1 << 1) /* controller reset */
#define UCMD_ITC_NO_THRESHOLD (~(0xff << 16)) /* Interrupt Threshold Control */
#if 1 /* FIXME these here for compatibility between my names and Leo's */
/* OTG interrupt enable bit masks */
#define OTGSC_INTERRUPT_ENABLE_BITS_MASK OTGSC_IE_MASK
#define OTGSC_INTSTS_MASK OTGSC_IS_MASK
/* OTG interrupt status bit masks */
#define OTGSC_INTERRUPT_STATUS_BITS_MASK OTGSC_IS_MASK
#endif
/* x_USBMODE */
#define USBMODE_SLOM (1 << 3) /* setup lockout mode */
#define USBMODE_ES (1 << 2) /* (big) endian select */
#define USBMODE_CM_MASK (3 << 0) /* controller mode mask */
#define USBMODE_CM_HOST (3 << 0) /* host */
#define USBMODE_CM_DEVICE (2 << 0) /* device */
#define USBMODE_CM_reserved (1 << 0) /* reserved */
#define HCSPARAMS_PPC (0x1<<4) /* Port Power Control */
extern enum fsl_usb2_modes get_usb_mode(struct fsl_usb2_platform_data *pdata);
#ifdef CONFIG_ARCH_MX6
#include "regs-usbphy-mx6.h"
#elif defined(CONFIG_ARCH_MVF)
#include "regs-usbphy-mvf.h"
#else
#include "regs-usbphy-others.h"
#endif
#endif /* __ASM_ARCH_MXC_ARC_OTG_H__ */
|
