images: Remove update script limitation of 5GB rootfs

Our current update procedure reads the rootfs payload in pre
split files of 64 MB size. However due to the workaround for
u-boot counting in hex and split did in decimal, the number of
chunks is limited to 89 resulting in a maximum size of 5.5GB.

Update the u-boot counting procedure to count in 3 digits from
the current 2 digits. This allows more than 800 plus chunks
which should take care of rootfs size and any future eMMC
update requirements.

Signed-off-by: Sanchayan Maity <sanchayan.maity@toradex.com>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>

10 files changed, 18 insertions, 26 deletions

diff --git a/recipes-images/images/files/apalis-t30/apalis-t30_bin/flash_blk.scr b/recipes-images/images/files/apalis-t30/apalis-t30_bin/flash_blk.scr
index d3ac2be..8cd6e80 100644
--- a/recipes-images/images/files/apalis-t30/apalis-t30_bin/flash_blk.scr
+++ b/recipes-images/images/files/apalis-t30/apalis-t30_bin/flash_blk.scr
@@ -3,7 +3,7 @@ test -n ${drive} || setenv drive 1
 
 setenv set_blkcnt 'setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200'
 #workaround U-Boot counting in hex and split did in decimal
-setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow ${filenum} % 0x10; test ${filenrlow} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
+setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow1 ${filenum} % 0x100; setexpr filenrlow2 ${filenrlow1} % 0x10; test ${filenrlow1} -eq "9a" && test ${filenrlow2} -ne "9" && setexpr filenum ${filenum} + 0x66; test ${filenrlow1} -ne "9a" && test ${filenrlow2} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
 setenv set_nextnum 'run incr_decimal; setexpr blkstart ${blkstart} + ${blkcnt}'
 
 setenv check_1 'setenv conf_blk_offset 0x1fff; mmc read ${loadaddr} ${conf_blk_offset} 1'
@@ -32,7 +32,7 @@ setenv update_configblock 'run check_configblock; load ${interface} ${drive}:1 $
 setenv update_1 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/mbr.bin && mmc dev 0 0 && mmc write ${loadaddr} 0x0 0x1'
 setenv update_2 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/boot.vfat && run set_blkcnt && mmc dev 0 0 && mmc write ${loadaddr} 0x2000 ${blkcnt}'
 #do it in chunks of 64M to fit into DDR RAM of the smallest module
-setenv update_3 'setenv filesize 4000000; setenv filenum 10; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done'
+setenv update_3 'setenv filesize 4000000; setenv filenum 100; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done'
 
 setenv echo_v2.3b2 echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate_v2.3b2\" to complete update"
 setenv migrate_v2.3b2 'run migrate_configblock; run update_new'
diff --git a/recipes-images/images/files/apalis-t30/apalis-t30_bin/flash_eth.scr b/recipes-images/images/files/apalis-t30/apalis-t30_bin/flash_eth.scr
index 873e166..56b2821 100644
--- a/recipes-images/images/files/apalis-t30/apalis-t30_bin/flash_eth.scr
+++ b/recipes-images/images/files/apalis-t30/apalis-t30_bin/flash_eth.scr
@@ -1,6 +1,6 @@
 setenv set_blkcnt 'setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200'
 #workaround U-Boot counting in hex and split did in decimal
-setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow ${filenum} % 0x10; test ${filenrlow} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
+setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow1 ${filenum} % 0x100; setexpr filenrlow2 ${filenrlow1} % 0x10; test ${filenrlow1} -eq "9a" && test ${filenrlow2} -ne "9" && setexpr filenum ${filenum} + 0x66; test ${filenrlow1} -ne "9a" && test ${filenrlow2} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
 setenv set_nextnum 'run incr_decimal; setexpr blkstart ${blkstart} + ${blkcnt}'
 
 setenv check_1 'setenv conf_blk_offset 0x1fff; mmc read ${loadaddr} ${conf_blk_offset} 1'
@@ -29,9 +29,7 @@ setenv update_configblock 'run check_configblock; tftpboot ${loadaddr} ${board_n
 setenv update_1 'tftpboot ${loadaddr} ${board_name}/mbr.bin && mmc dev 0 0 && mmc write ${loadaddr} 0x0 0x1'
 setenv update_2 'tftpboot ${loadaddr} ${board_name}/boot.vfat && run set_blkcnt && mmc dev 0 0 && mmc write ${loadaddr} 0x2000 ${blkcnt}'
 #do it in chunks of 64M to fit into DDR RAM of the smallest module
-#split root.ext3 into multiple 64M chunks before copying to TFTP folder as follows
-#split -a 2 -b `expr 64 \* 1024 \* 1024` --numeric-suffixes=10 root.ext3 root.ext3-
-setenv update_3 'setenv filesize 4000000; setenv filenum 10; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done'
+setenv update_3 'setenv filesize 4000000; setenv filenum 100; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done'
 
 setenv echo_v2.3b2 echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate_v2.3b2\" to complete update"
 setenv migrate_v2.3b2 'run migrate_configblock; run update_new'
diff --git a/recipes-images/images/files/apalis-tk1/apalis-tk1_bin/flash_blk.scr b/recipes-images/images/files/apalis-tk1/apalis-tk1_bin/flash_blk.scr
index b95b0d3..95b6ae5 100644
--- a/recipes-images/images/files/apalis-tk1/apalis-tk1_bin/flash_blk.scr
+++ b/recipes-images/images/files/apalis-tk1/apalis-tk1_bin/flash_blk.scr
@@ -3,7 +3,7 @@ test -n ${drive} || setenv drive 1
 
 setenv set_blkcnt 'setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200'
 #workaround U-Boot counting in hex and split did in decimal
-setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow ${filenum} % 0x10; test ${filenrlow} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
+setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow1 ${filenum} % 0x100; setexpr filenrlow2 ${filenrlow1} % 0x10; test ${filenrlow1} -eq "9a" && test ${filenrlow2} -ne "9" && setexpr filenum ${filenum} + 0x66; test ${filenrlow1} -ne "9a" && test ${filenrlow2} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
 setenv set_nextnum 'run incr_decimal; setexpr blkstart ${blkstart} + ${blkcnt}'
 
 setenv check_1 'setenv conf_blk_offset 0x1fff; mmc read ${loadaddr} ${conf_blk_offset} 1'
@@ -24,7 +24,7 @@ setenv update_configblock 'run check_configblock; load ${interface} ${drive}:1 $
 setenv update_1 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/mbr.bin && mmc dev 0 0 && mmc write ${loadaddr} 0x0 0x1'
 setenv update_2 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/boot.vfat && run set_blkcnt && mmc dev 0 0 && mmc write ${loadaddr} 0x2000 ${blkcnt}'
 #do it in chunks of 64M to fit into DDR RAM of the smallest module
-setenv update_rootfs 'setenv filesize 4000000; setenv filenum 10; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done'
+setenv update_rootfs 'setenv filesize 4000000; setenv filenum 100; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done'
 
 setenv update 'run update_uboot; run update_1; run update_2; run update_kernel; run update_fdt; run update_rootfs; reset'
 
diff --git a/recipes-images/images/files/apalis-tk1/apalis-tk1_bin/flash_eth.scr b/recipes-images/images/files/apalis-tk1/apalis-tk1_bin/flash_eth.scr
index 6f92554..01da4bb 100644
--- a/recipes-images/images/files/apalis-tk1/apalis-tk1_bin/flash_eth.scr
+++ b/recipes-images/images/files/apalis-tk1/apalis-tk1_bin/flash_eth.scr
@@ -1,6 +1,6 @@
 setenv set_blkcnt 'setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200'
 #workaround U-Boot counting in hex and split did in decimal
-setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow ${filenum} % 0x10; test ${filenrlow} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
+setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow1 ${filenum} % 0x100; setexpr filenrlow2 ${filenrlow1} % 0x10; test ${filenrlow1} -eq "9a" && test ${filenrlow2} -ne "9" && setexpr filenum ${filenum} + 0x66; test ${filenrlow1} -ne "9a" && test ${filenrlow2} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
 setenv set_nextnum 'run incr_decimal; setexpr blkstart ${blkstart} + ${blkcnt}'
 
 setenv check_1 'setenv conf_blk_offset 0x1fff; mmc read ${loadaddr} ${conf_blk_offset} 1'
@@ -21,9 +21,7 @@ setenv update_configblock 'run check_configblock; tftpboot ${loadaddr} ${board_n
 setenv update_1 'tftpboot ${loadaddr} ${board_name}/mbr.bin && mmc dev 0 0 && mmc write ${loadaddr} 0x0 0x1'
 setenv update_2 'tftpboot ${loadaddr} ${board_name}/boot.vfat && run set_blkcnt && mmc dev 0 0 && mmc write ${loadaddr} 0x2000 ${blkcnt}'
 #do it in chunks of 64M to fit into DDR RAM of the smallest module
-#split root.ext3 into multiple 64M chunks before copying to TFTP folder as follows
-#split -a 2 -b `expr 64 \* 1024 \* 1024` --numeric-suffixes=10 root.ext3 root.ext3-
-setenv update_rootfs 'setenv filesize 4000000; setenv filenum 10; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done'
+setenv update_rootfs 'setenv filesize 4000000; setenv filenum 100; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done'
 
 setenv update 'run update_uboot; run update_1; run update_2; run update_kernel; run update_fdt; run update_rootfs; reset'
 
diff --git a/recipes-images/images/files/colibri-t30/colibri-t30_bin/flash_blk.scr b/recipes-images/images/files/colibri-t30/colibri-t30_bin/flash_blk.scr
index 17a1ea0..8d5127b 100644
--- a/recipes-images/images/files/colibri-t30/colibri-t30_bin/flash_blk.scr
+++ b/recipes-images/images/files/colibri-t30/colibri-t30_bin/flash_blk.scr
@@ -3,7 +3,7 @@ test -n ${drive} || setenv drive 1
 
 setenv set_blkcnt 'setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200'
 #workaround U-Boot counting in hex and split did in decimal
-setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow ${filenum} % 0x10; test ${filenrlow} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
+setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow1 ${filenum} % 0x100; setexpr filenrlow2 ${filenrlow1} % 0x10; test ${filenrlow1} -eq "9a" && test ${filenrlow2} -ne "9" && setexpr filenum ${filenum} + 0x66; test ${filenrlow1} -ne "9a" && test ${filenrlow2} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
 setenv set_nextnum 'run incr_decimal; setexpr blkstart ${blkstart} + ${blkcnt}'
 
 setenv check_1 'setenv conf_blk_offset 0x1fff; mmc read ${loadaddr} ${conf_blk_offset} 1'
@@ -32,7 +32,7 @@ setenv update_configblock 'run check_configblock; load ${interface} ${drive}:1 $
 setenv update_1 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/mbr.bin && mmc dev 0 0 && mmc write ${loadaddr} 0x0 0x1'
 setenv update_2 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/boot.vfat && run set_blkcnt && mmc dev 0 0 && mmc write ${loadaddr} 0x2000 ${blkcnt}'
 #do it in chunks of 64M to fit into DDR RAM of the smallest module
-setenv update_3 'setenv filesize 4000000; setenv filenum 10; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done'
+setenv update_3 'setenv filesize 4000000; setenv filenum 100; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done'
 
 setenv echo_v2.3b1 echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate_v2.3b1\" to complete update"
 setenv migrate_v2.3b1 'run migrate_configblock; run update_new'
diff --git a/recipes-images/images/files/colibri-t30/colibri-t30_bin/flash_eth.scr b/recipes-images/images/files/colibri-t30/colibri-t30_bin/flash_eth.scr
index cad7b5a..ce2df18 100644
--- a/recipes-images/images/files/colibri-t30/colibri-t30_bin/flash_eth.scr
+++ b/recipes-images/images/files/colibri-t30/colibri-t30_bin/flash_eth.scr
@@ -1,6 +1,6 @@
 setenv set_blkcnt 'setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200'
 #workaround U-Boot counting in hex and split did in decimal
-setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow ${filenum} % 0x10; test ${filenrlow} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
+setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow1 ${filenum} % 0x100; setexpr filenrlow2 ${filenrlow1} % 0x10; test ${filenrlow1} -eq "9a" && test ${filenrlow2} -ne "9" && setexpr filenum ${filenum} + 0x66; test ${filenrlow1} -ne "9a" && test ${filenrlow2} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
 setenv set_nextnum 'run incr_decimal; setexpr blkstart ${blkstart} + ${blkcnt}'
 
 setenv check_1 'setenv conf_blk_offset 0x1fff; mmc read ${loadaddr} ${conf_blk_offset} 1'
@@ -29,9 +29,7 @@ setenv update_configblock 'run check_configblock; tftpboot ${loadaddr} ${board_n
 setenv update_1 'tftpboot ${loadaddr} ${board_name}/mbr.bin && mmc dev 0 0 && mmc write ${loadaddr} 0x0 0x1'
 setenv update_2 'tftpboot ${loadaddr} ${board_name}/boot.vfat && run set_blkcnt && mmc dev 0 0 && mmc write ${loadaddr} 0x2000 ${blkcnt}'
 #do it in chunks of 64M to fit into DDR RAM of the smallest module
-#split root.ext3 into multiple 64M chunks before copying to TFTP folder as follows
-#split -a 2 -b `expr 64 \* 1024 \* 1024` --numeric-suffixes=10 root.ext3 root.ext3-
-setenv update_3 'setenv filesize 4000000; setenv filenum 10; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done'
+setenv update_3 'setenv filesize 4000000; setenv filenum 100; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done'
 
 setenv echo_v2.3b1 echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate_v2.3b1\" to complete update"
 setenv migrate_v2.3b1 'run migrate_configblock; run update_new'
diff --git a/recipes-images/images/files/library/imx6/flash_blk.scr b/recipes-images/images/files/library/imx6/flash_blk.scr
index 48a355f..ec3e00b 100644
--- a/recipes-images/images/files/library/imx6/flash_blk.scr
+++ b/recipes-images/images/files/library/imx6/flash_blk.scr
@@ -4,7 +4,7 @@ setenv uboot_hwpart 1
 
 setenv set_blkcnt 'setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200'
 #workaround U-Boot counting in hex and split did in decimal
-setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow ${filenum} % 0x10; test ${filenrlow} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
+setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow1 ${filenum} % 0x100; setexpr filenrlow2 ${filenrlow1} % 0x10; test ${filenrlow1} -eq "9a" && test ${filenrlow2} -ne "9" && setexpr filenum ${filenum} + 0x66; test ${filenrlow1} -ne "9a" && test ${filenrlow2} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
 setenv set_nextnum 'run incr_decimal; setexpr blkstart ${blkstart} + ${blkcnt}'
 
 setenv check_1 'setenv conf_blk_offset 0x1fff; mmc read ${loadaddr} ${conf_blk_offset} 1'
@@ -32,7 +32,7 @@ setenv update_configblock 'run check_configblock; load ${interface} ${drive}:1 $
 setenv update_1 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/mbr.bin && mmc dev 0 0 && mmc write ${loadaddr} 0x0 0x1'
 setenv update_2 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/boot.vfat && run set_blkcnt && mmc dev 0 0 && mmc write ${loadaddr} 0x2000 ${blkcnt}'
 #do it in chunks of 64M to fit into DDR RAM of the smallest module
-setenv update_3 'setenv filesize 4000000; setenv filenum 10; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done; true'
+setenv update_3 'setenv filesize 4000000; setenv filenum 100; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done; true'
 
 setenv echo_migrate echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate\" to complete update"
 setenv migrate 'run migrate_configblock; run update_latest; reset'
diff --git a/recipes-images/images/files/library/imx6/flash_eth.scr b/recipes-images/images/files/library/imx6/flash_eth.scr
index 281bf5b..77e2ac9 100644
--- a/recipes-images/images/files/library/imx6/flash_eth.scr
+++ b/recipes-images/images/files/library/imx6/flash_eth.scr
@@ -2,7 +2,7 @@ setenv uboot_hwpart 1
 
 setenv set_blkcnt 'setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200'
 #workaround U-Boot counting in hex and split did in decimal
-setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow ${filenum} % 0x10; test ${filenrlow} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
+setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow1 ${filenum} % 0x100; setexpr filenrlow2 ${filenrlow1} % 0x10; test ${filenrlow1} -eq "9a" && test ${filenrlow2} -ne "9" && setexpr filenum ${filenum} + 0x66; test ${filenrlow1} -ne "9a" && test ${filenrlow2} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
 setenv set_nextnum 'run incr_decimal; setexpr blkstart ${blkstart} + ${blkcnt}'
 
 setenv check_1 'setenv conf_blk_offset 0x1fff; mmc read ${loadaddr} ${conf_blk_offset} 1'
@@ -30,9 +30,7 @@ setenv update_configblock 'run check_configblock; tftpboot ${loadaddr} ${board_n
 setenv update_1 'tftpboot ${loadaddr} ${board_name}/mbr.bin && mmc dev 0 0 && mmc write ${loadaddr} 0x0 0x1'
 setenv update_2 'tftpboot ${loadaddr} ${board_name}/boot.vfat && run set_blkcnt && mmc dev 0 0 && mmc write ${loadaddr} 0x2000 ${blkcnt}'
 #do it in chunks of 64M to fit into DDR RAM of the smallest module
-#split root.ext3 into multiple 64M chunks before copying to TFTP folder as follows
-#split -a 2 -b `expr 64 \* 1024 \* 1024` --numeric-suffixes=10 root.ext3 root.ext3-
-setenv update_3 'setenv filesize 4000000; setenv filenum 10; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done; true'
+setenv update_3 'setenv filesize 4000000; setenv filenum 100; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done; true'
 
 setenv echo_migrate echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate\" to complete update"
 setenv migrate 'run migrate_configblock; run update_latest; reset'
diff --git a/recipes-images/images/files/library/imx6/update.sh b/recipes-images/images/files/library/imx6/update.sh
index 6781f78..71dda6d 100755
--- a/recipes-images/images/files/library/imx6/update.sh
+++ b/recipes-images/images/files/library/imx6/update.sh
@@ -305,7 +305,7 @@ sudo cp ${BINARIES}/fwd_eth.img "$OUT_DIR/../flash_eth.img"
 sudo cp ${BINARIES}/fwd_mmc.img "$OUT_DIR/../flash_mmc.img"
 
 if [ "$SPLIT" -ge 1 ] ; then
-sudo split -a 2 -b `expr 64 \* 1024 \* 1024` --numeric-suffixes=10 ${BINARIES}/${IMAGEFILE} "$OUT_DIR/root.ext3-"
+sudo split -a 3 -b `expr 64 \* 1024 \* 1024` --numeric-suffixes=100 ${BINARIES}/${IMAGEFILE} "$OUT_DIR/root.ext3-"
 fi
 
 #cleanup intermediate files
diff --git a/recipes-images/images/files/library/tegra/update.sh b/recipes-images/images/files/library/tegra/update.sh
index 0032540..90e12f7 100755
--- a/recipes-images/images/files/library/tegra/update.sh
+++ b/recipes-images/images/files/library/tegra/update.sh
@@ -446,7 +446,7 @@ sudo cp fwd_mmc.img "$OUT_DIR/../flash_mmc.img"
 
 if [ "${IMAGEFILE}" = "root.ext3" ] ; then
 	if [ "$SPLIT" -ge 1 ] ; then
-		sudo split -a 2 -b `expr 64 \* 1024 \* 1024` --numeric-suffixes=10 ${IMAGEFILE} "$OUT_DIR/root.ext3-"
+		sudo split -a 3 -b `expr 64 \* 1024 \* 1024` --numeric-suffixes=100 ${IMAGEFILE} "$OUT_DIR/root.ext3-"
 	fi
 else
 	sudo cp ${IMAGEFILE}* "$OUT_DIR"