summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--release-notes/Apalis_TK1_LinuxReleaseNotesV2.x.txt52
1 files changed, 47 insertions, 5 deletions
diff --git a/release-notes/Apalis_TK1_LinuxReleaseNotesV2.x.txt b/release-notes/Apalis_TK1_LinuxReleaseNotesV2.x.txt
index 45ff75a..6e2646b 100644
--- a/release-notes/Apalis_TK1_LinuxReleaseNotesV2.x.txt
+++ b/release-notes/Apalis_TK1_LinuxReleaseNotesV2.x.txt
@@ -16,6 +16,47 @@ Licensing:
- customer required to obtain proper re-distribution license
********************************************************************************
+Linux Image V2.6.1 Beta 2 (November 22, 2016)
+
+- U-Boot boot loader:
+ - remove GPIOs used as special function pins
+ - fix device tree pre-fix in DFU_ALT_EMMC_INFO
+ - clean-up AS3722 PMIC configuration
+ - pull-up GPIO_PI6 connected to TMP451's ALERT#/THERM2#
+ - configure DP_HPD_PFF0 pin as optional DisplayPort hot-plug detect
+ - adjust pin muxing for V1.1 HW
+ - sd card detect SD1_CD# applicable for V1.1 modules using GPIO_PV2
+- Linux kernel:
+ - enable UART4
+ - fix CL-DVFS and soctherm to unlock full performance
+ - remove GPIO functionality from DP_HPD and GPIO_PFF2 pins
+ - optional eDP support requiring DP_HPD_PFF0 pin as optional hot-plug detect
+ - integrate ADV7280-M, AP1302, OV5640 and TC358743 camera support
+ - revert introduction of 2 kthreads for camera capture
+ - configure IPv6 SIT driver as module
+ - fix PCIe clock and reset not conforming to specification
+ - fix some mistakes in Tegra124 concerning pin muxing
+ - add 200 MHz tap hole coefficients for UHS-I tuning on SDMMC1
+ - pull-up GPIO_PI6 connected to TMP451's ALERT#/THERM2#
+ - adjust pin muxing for V1.1 HW
+ - sd card detect SD1_CD# applicable for V1.1 modules using GPIO_PV2
+ - no longer do card detect polling on V1.1 HW
+- Linux user-space:
+ - add initial asound.state
+- OpenEmbedded build system:
+ - fix buildtime warnings in linux-driver-package
+ - Qt4 patch which fixes 24-bit colour depth
+ - QtQuickControls only built if QtBase configured with accessibility
+ - update toradex-mirrors to V2.6
+
+- sources git.toradex.com tag Apalis_TK1_LinuxImageV2.6.1Beta2_20161122
+ - repository linux-toradex branch toradex_tk1_l4t_r21.5
+ - repository u-boot-toradex branch 2015.04-toradex
+
+Known Issues:
+- License texts do not get deployed to the root file system.
+
+********************************************************************************
Linux Image V2.6.1 Beta 1 (September 29, 2016)
- U-Boot boot loader:
@@ -109,8 +150,10 @@ Working on latest image:
- Gigabit Ethernet enpXs0, X being its PCIe bus number
- eMMC ext3
- serial console debug UARTA aka UART1 ttyS0
+ - high speed serial UARTB aka UART3, UARTC aka UART4 and UARTD aka UART2 ttyHSX
+ - I2C via /dev/i2c-X
- 4-bit MMC card mmc1 (full UHS-I support)
- - 4-bit SD card mmc2 (full UHS-I support, polled card detect)
+ - 4-bit SD card mmc2 (full UHS-I support)
- PWM /sys/class/pwm/pwmchip0
- HDMI HDA audio hw:1,3
- analogue audio capture and playback hw:0,0
@@ -127,6 +170,8 @@ Working on latest image:
- SATA (regular port or mSATA slot)
- DVFS power management including low-power core migration
- single channel LVDS
+ - optional eDP
+ - optional CSI2 camera interface
- Linux user-space
- graphics (HDMI-0 aka DVI-D and LVDS-0)
- tegrastats
@@ -139,8 +184,6 @@ Not working or not tested:
- U-Boot USB keyboard
- Linux kernel
- RTC (board level I2C RTC)
- - high speed serial UARTB aka UART3, UARTC aka UART4 and UARTD aka UART2 ttyHSX
- - I2C via /dev/i2c-X
- HDA audio (on Eval Board V1.0a: check datasheet/schematics for patch
instructions)
- resistive touch
@@ -148,7 +191,6 @@ Not working or not tested:
- watchdog
- analogue inputs
- CAN via can0 and can1
- - optional CSI2 camera interface
- IrDA
- RS-485
- SIM card
@@ -161,4 +203,4 @@ Not working or not tested:
Flashing instruction have been moved to the Toradex developer article:
http://developer.toradex.com/knowledge-base/flashing-linux-on-tegra-modules
-Toradex, October 5, 2016
+Toradex, November 26, 2016