summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--recipes-connectivity/openssh/openssh/openssh/add-test-support-for-busybox.patch69
-rw-r--r--recipes-connectivity/openssh/openssh/openssh/init115
-rwxr-xr-xrecipes-connectivity/openssh/openssh/openssh/run-ptest7
-rw-r--r--recipes-connectivity/openssh/openssh/openssh/ssh_config48
-rw-r--r--recipes-connectivity/openssh/openssh/openssh/sshd10
-rw-r--r--recipes-connectivity/openssh/openssh/openssh/sshd.socket10
-rw-r--r--recipes-connectivity/openssh/openssh/openssh/sshd@.service11
-rw-r--r--recipes-connectivity/openssh/openssh/openssh/sshd_config133
-rw-r--r--recipes-connectivity/openssh/openssh/openssh/sshdgenkeys.service11
-rw-r--r--recipes-connectivity/openssh/openssh/openssh/volatiles.99_sshd2
-rw-r--r--recipes-connectivity/openssh/openssh/openssh_6.8p1.bb148
11 files changed, 0 insertions, 564 deletions
diff --git a/recipes-connectivity/openssh/openssh/openssh/add-test-support-for-busybox.patch b/recipes-connectivity/openssh/openssh/openssh/add-test-support-for-busybox.patch
deleted file mode 100644
index adc25c6..0000000
--- a/recipes-connectivity/openssh/openssh/openssh/add-test-support-for-busybox.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-Adjust test cases to work with busybox.
-
-- Replace dd parameter "obs" with "bs".
-- Replace "head -<num>" with "head -n <num>".
-
-Signed-off-by: Maxin B. John <maxin.john@enea.com>
-Upstream-Status: Pending
-
-Index: openssh-6.8p1/regress/cipher-speed.sh
-===================================================================
---- openssh-6.8p1.orig/regress/cipher-speed.sh
-+++ openssh-6.8p1/regress/cipher-speed.sh
-@@ -17,7 +17,7 @@ for c in `${SSH} -Q cipher`; do n=0; for
- printf "%-60s" "$c/$m:"
- ( ${SSH} -o 'compression no' \
- -F $OBJ/ssh_proxy -2 -m $m -c $c somehost \
-- exec sh -c \'"dd of=/dev/null obs=32k"\' \
-+ exec sh -c \'"dd of=/dev/null bs=32k"\' \
- < ${DATA} ) 2>&1 | getbytes
-
- if [ $? -ne 0 ]; then
-@@ -42,7 +42,7 @@ for c in $ciphers; do
- printf "%-60s" "$c:"
- ( ${SSH} -o 'compression no' \
- -F $OBJ/ssh_proxy -1 -c $c somehost \
-- exec sh -c \'"dd of=/dev/null obs=32k"\' \
-+ exec sh -c \'"dd of=/dev/null bs=32k"\' \
- < ${DATA} ) 2>&1 | getbytes
- if [ $? -ne 0 ]; then
- fail "ssh -1 failed with cipher $c"
-Index: openssh-6.8p1/regress/transfer.sh
-===================================================================
---- openssh-6.8p1.orig/regress/transfer.sh
-+++ openssh-6.8p1/regress/transfer.sh
-@@ -15,7 +15,7 @@ for p in ${SSH_PROTOCOLS}; do
- for s in 10 100 1k 32k 64k 128k 256k; do
- trace "proto $p dd-size ${s}"
- rm -f ${COPY}
-- dd if=$DATA obs=${s} 2> /dev/null | \
-+ dd if=$DATA bs=${s} 2> /dev/null | \
- ${SSH} -q -$p -F $OBJ/ssh_proxy somehost "cat > ${COPY}"
- if [ $? -ne 0 ]; then
- fail "ssh cat $DATA failed"
-Index: openssh-6.8p1/regress/yes-head.sh
-===================================================================
---- openssh-6.8p1.orig/regress/yes-head.sh
-+++ openssh-6.8p1/regress/yes-head.sh
-@@ -4,7 +4,7 @@
- tid="yes pipe head"
-
- for p in ${SSH_PROTOCOLS}; do
-- lines=`${SSH} -$p -F $OBJ/ssh_proxy thishost 'sh -c "while true;do echo yes;done | _POSIX2_VERSION=199209 head -2000"' | (sleep 3 ; wc -l)`
-+ lines=`${SSH} -$p -F $OBJ/ssh_proxy thishost 'sh -c "while true;do echo yes;done | _POSIX2_VERSION=199209 head -n 2000"' | (sleep 3 ; wc -l)`
- if [ $? -ne 0 ]; then
- fail "yes|head test failed"
- lines = 0;
-Index: openssh-6.8p1/regress/key-options.sh
-===================================================================
---- openssh-6.8p1.orig/regress/key-options.sh
-+++ openssh-6.8p1/regress/key-options.sh
-@@ -54,7 +54,7 @@ for p in ${SSH_PROTOCOLS}; do
- fi
-
- sed 's/.*/from="'"$f"'" &/' $origkeys >$authkeys
-- from=`head -1 $authkeys | cut -f1 -d ' '`
-+ from=`head -n 1 $authkeys | cut -f1 -d ' '`
- verbose "key option proto $p $from"
- r=`${SSH} -$p -q -F $OBJ/ssh_proxy somehost 'echo true'`
- if [ "$r" = "true" ]; then
diff --git a/recipes-connectivity/openssh/openssh/openssh/init b/recipes-connectivity/openssh/openssh/openssh/init
deleted file mode 100644
index 70d4a34..0000000
--- a/recipes-connectivity/openssh/openssh/openssh/init
+++ /dev/null
@@ -1,115 +0,0 @@
-#! /bin/sh
-set -e
-
-PIDFILE=/var/run/sshd.pid
-
-# source function library
-. /etc/init.d/functions
-
-# /etc/init.d/ssh: start and stop the OpenBSD "secure shell" daemon
-
-test -x /usr/sbin/sshd || exit 0
-( /usr/sbin/sshd -\? 2>&1 | grep -q OpenSSH ) 2>/dev/null || exit 0
-
-# /etc/default/ssh may set SYSCONFDIR and SSHD_OPTS
-if test -f /etc/default/ssh; then
- . /etc/default/ssh
-fi
-
-[ -z "$SYSCONFDIR" ] && SYSCONFDIR=/etc/ssh
-mkdir -p $SYSCONFDIR
-
-HOST_KEY_RSA=$SYSCONFDIR/ssh_host_rsa_key
-HOST_KEY_DSA=$SYSCONFDIR/ssh_host_dsa_key
-HOST_KEY_ECDSA=$SYSCONFDIR/ssh_host_ecdsa_key
-HOST_KEY_ED25519=$SYSCONFDIR/ssh_host_ed25519_key
-
-check_for_no_start() {
- # forget it if we're trying to start, and /etc/ssh/sshd_not_to_be_run exists
- if [ -e $SYSCONFDIR/sshd_not_to_be_run ]; then
- echo "OpenBSD Secure Shell server not in use ($SYSCONFDIR/sshd_not_to_be_run)"
- exit 0
- fi
-}
-
-check_privsep_dir() {
- # Create the PrivSep empty dir if necessary
- if [ ! -d /var/run/sshd ]; then
- mkdir /var/run/sshd
- chmod 0755 /var/run/sshd
- fi
-}
-
-check_config() {
- /usr/sbin/sshd -t || exit 1
-}
-
-check_keys() {
- # create keys if necessary
- if [ ! -f $HOST_KEY_RSA ]; then
- echo " generating ssh RSA key..."
- ssh-keygen -q -f $HOST_KEY_RSA -N '' -t rsa
- fi
- if [ ! -f $HOST_KEY_ECDSA ]; then
- echo " generating ssh ECDSA key..."
- ssh-keygen -q -f $HOST_KEY_ECDSA -N '' -t ecdsa
- fi
- if [ ! -f $HOST_KEY_DSA ]; then
- echo " generating ssh DSA key..."
- ssh-keygen -q -f $HOST_KEY_DSA -N '' -t dsa
- fi
- if [ ! -f $HOST_KEY_ED25519 ]; then
- echo " generating ssh ED25519 key..."
- ssh-keygen -q -f $HOST_KEY_ED25519 -N '' -t ed25519
- fi
-}
-
-export PATH="${PATH:+$PATH:}/usr/sbin:/sbin"
-
-case "$1" in
- start)
- check_for_no_start
- echo "Starting OpenBSD Secure Shell server: sshd"
- check_keys
- check_privsep_dir
- start-stop-daemon -S -p $PIDFILE -x /usr/sbin/sshd -- $SSHD_OPTS
- echo "done."
- ;;
- stop)
- echo -n "Stopping OpenBSD Secure Shell server: sshd"
- start-stop-daemon -K -p $PIDFILE -x /usr/sbin/sshd
- echo "."
- ;;
-
- reload|force-reload)
- check_for_no_start
- check_keys
- check_config
- echo -n "Reloading OpenBSD Secure Shell server's configuration"
- start-stop-daemon -K -p $PIDFILE -s 1 -x /usr/sbin/sshd
- echo "."
- ;;
-
- restart)
- check_keys
- check_config
- echo -n "Restarting OpenBSD Secure Shell server: sshd"
- start-stop-daemon -K -p $PIDFILE --oknodo -x /usr/sbin/sshd
- check_for_no_start
- check_privsep_dir
- sleep 2
- start-stop-daemon -S -p $PIDFILE -x /usr/sbin/sshd -- $SSHD_OPTS
- echo "."
- ;;
-
- status)
- status /usr/sbin/sshd
- exit $?
- ;;
-
- *)
- echo "Usage: /etc/init.d/ssh {start|stop|status|reload|force-reload|restart}"
- exit 1
-esac
-
-exit 0
diff --git a/recipes-connectivity/openssh/openssh/openssh/run-ptest b/recipes-connectivity/openssh/openssh/openssh/run-ptest
deleted file mode 100755
index 3e725cf..0000000
--- a/recipes-connectivity/openssh/openssh/openssh/run-ptest
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/sh
-
-export TEST_SHELL=sh
-
-cd regress
-make -k .OBJDIR=`pwd` .CURDIR=`pwd` tests \
- | sed -e 's/^skipped/SKIP: /g' -e 's/^ok /PASS: /g' -e 's/^failed/FAIL: /g'
diff --git a/recipes-connectivity/openssh/openssh/openssh/ssh_config b/recipes-connectivity/openssh/openssh/openssh/ssh_config
deleted file mode 100644
index 9e91915..0000000
--- a/recipes-connectivity/openssh/openssh/openssh/ssh_config
+++ /dev/null
@@ -1,48 +0,0 @@
-# $OpenBSD: ssh_config,v 1.28 2013/09/16 11:35:43 sthen Exp $
-
-# This is the ssh client system-wide configuration file. See
-# ssh_config(5) for more information. This file provides defaults for
-# users, and the values can be changed in per-user configuration files
-# or on the command line.
-
-# Configuration data is parsed as follows:
-# 1. command line options
-# 2. user-specific file
-# 3. system-wide file
-# Any configuration value is only changed the first time it is set.
-# Thus, host-specific definitions should be at the beginning of the
-# configuration file, and defaults at the end.
-
-# Site-wide defaults for some commonly used options. For a comprehensive
-# list of available options, their meanings and defaults, please see the
-# ssh_config(5) man page.
-
-Host *
- ForwardAgent yes
- ForwardX11 yes
-# RhostsRSAAuthentication no
-# RSAAuthentication yes
-# PasswordAuthentication yes
-# HostbasedAuthentication no
-# GSSAPIAuthentication no
-# GSSAPIDelegateCredentials no
-# BatchMode no
-# CheckHostIP yes
-# AddressFamily any
-# ConnectTimeout 0
-# StrictHostKeyChecking ask
-# IdentityFile ~/.ssh/identity
-# IdentityFile ~/.ssh/id_rsa
-# IdentityFile ~/.ssh/id_dsa
-# Port 22
-# Protocol 2,1
-# Cipher 3des
-# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
-# MACs hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160
-# EscapeChar ~
-# Tunnel no
-# TunnelDevice any:any
-# PermitLocalCommand no
-# VisualHostKey no
-# ProxyCommand ssh -q -W %h:%p gateway.example.com
-# RekeyLimit 1G 1h
diff --git a/recipes-connectivity/openssh/openssh/openssh/sshd b/recipes-connectivity/openssh/openssh/openssh/sshd
deleted file mode 100644
index 4882e58..0000000
--- a/recipes-connectivity/openssh/openssh/openssh/sshd
+++ /dev/null
@@ -1,10 +0,0 @@
-#%PAM-1.0
-
-auth include common-auth
-account required pam_nologin.so
-account include common-account
-password include common-password
-session optional pam_keyinit.so force revoke
-session include common-session
-session required pam_loginuid.so
-
diff --git a/recipes-connectivity/openssh/openssh/openssh/sshd.socket b/recipes-connectivity/openssh/openssh/openssh/sshd.socket
deleted file mode 100644
index 12c39b2..0000000
--- a/recipes-connectivity/openssh/openssh/openssh/sshd.socket
+++ /dev/null
@@ -1,10 +0,0 @@
-[Unit]
-Conflicts=sshd.service
-
-[Socket]
-ExecStartPre=@BASE_BINDIR@/mkdir -p /var/run/sshd
-ListenStream=22
-Accept=yes
-
-[Install]
-WantedBy=sockets.target
diff --git a/recipes-connectivity/openssh/openssh/openssh/sshd@.service b/recipes-connectivity/openssh/openssh/openssh/sshd@.service
deleted file mode 100644
index bb2d68e..0000000
--- a/recipes-connectivity/openssh/openssh/openssh/sshd@.service
+++ /dev/null
@@ -1,11 +0,0 @@
-[Unit]
-Description=OpenSSH Per-Connection Daemon
-Wants=sshdgenkeys.service
-After=sshdgenkeys.service
-
-[Service]
-ExecStart=-@SBINDIR@/sshd -i
-ExecReload=@BASE_BINDIR@/kill -HUP $MAINPID
-StandardInput=socket
-StandardError=syslog
-KillMode=process
diff --git a/recipes-connectivity/openssh/openssh/openssh/sshd_config b/recipes-connectivity/openssh/openssh/openssh/sshd_config
deleted file mode 100644
index d48bd2b..0000000
--- a/recipes-connectivity/openssh/openssh/openssh/sshd_config
+++ /dev/null
@@ -1,133 +0,0 @@
-# $OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $
-
-# This is the sshd server system-wide configuration file. See
-# sshd_config(5) for more information.
-
-# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
-
-# The strategy used for options in the default sshd_config shipped with
-# OpenSSH is to specify options with their default value where
-# possible, but leave them commented. Uncommented options change a
-# default value.
-
-#Port 22
-#AddressFamily any
-#ListenAddress 0.0.0.0
-#ListenAddress ::
-
-# The default requires explicit activation of protocol 1
-Protocol 2
-
-# HostKey for protocol version 1
-#HostKey /etc/ssh/ssh_host_key
-# HostKeys for protocol version 2
-#HostKey /etc/ssh/ssh_host_rsa_key
-#HostKey /etc/ssh/ssh_host_dsa_key
-#HostKey /etc/ssh/ssh_host_ecdsa_key
-#HostKey /etc/ssh/ssh_host_ed25519_key
-
-# Lifetime and size of ephemeral version 1 server key
-#KeyRegenerationInterval 1h
-#ServerKeyBits 1024
-
-# Ciphers and keying
-#RekeyLimit default none
-
-# Logging
-# obsoletes QuietMode and FascistLogging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2m
-#PermitRootLogin yes
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
-
-#RSAAuthentication yes
-#PubkeyAuthentication yes
-
-# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
-# but this is overridden so installations will only check .ssh/authorized_keys
-AuthorizedKeysFile .ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
-#RhostsRSAAuthentication no
-# similar for protocol version 2
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# RhostsRSAAuthentication and HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-#IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-#PasswordAuthentication yes
-#PermitEmptyPasswords no
-
-# Change to no to disable s/key passwords
-ChallengeResponseAuthentication no
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication and
-# PasswordAuthentication. Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
-#UsePAM no
-
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-#X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PermitTTY yes
-#PrintMotd yes
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-UsePrivilegeSeparation sandbox # Default for new installations.
-#PermitUserEnvironment no
-Compression no
-ClientAliveInterval 15
-ClientAliveCountMax 4
-#UseDNS yes
-#PidFile /var/run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
-
-# override default of no subsystems
-Subsystem sftp /usr/libexec/sftp-server
-
-# Example of overriding settings on a per-user basis
-#Match User anoncvs
-# X11Forwarding no
-# AllowTcpForwarding no
-# PermitTTY no
-# ForceCommand cvs server
diff --git a/recipes-connectivity/openssh/openssh/openssh/sshdgenkeys.service b/recipes-connectivity/openssh/openssh/openssh/sshdgenkeys.service
deleted file mode 100644
index d65086f..0000000
--- a/recipes-connectivity/openssh/openssh/openssh/sshdgenkeys.service
+++ /dev/null
@@ -1,11 +0,0 @@
-[Unit]
-Description=OpenSSH Key Generation
-ConditionPathExists=|!/etc/ssh/ssh_host_rsa_key
-ConditionPathExists=|!/etc/ssh/ssh_host_dsa_key
-ConditionPathExists=|!/etc/ssh/ssh_host_ecdsa_key
-ConditionPathExists=|!/etc/ssh/ssh_host_ed25519_key
-
-[Service]
-ExecStart=@BINDIR@/ssh-keygen -A
-Type=oneshot
-RemainAfterExit=yes
diff --git a/recipes-connectivity/openssh/openssh/openssh/volatiles.99_sshd b/recipes-connectivity/openssh/openssh/openssh/volatiles.99_sshd
deleted file mode 100644
index a0d2af3..0000000
--- a/recipes-connectivity/openssh/openssh/openssh/volatiles.99_sshd
+++ /dev/null
@@ -1,2 +0,0 @@
-d root root 0755 /var/run/sshd none
-f root root 0644 /var/log/lastlog none
diff --git a/recipes-connectivity/openssh/openssh/openssh_6.8p1.bb b/recipes-connectivity/openssh/openssh/openssh_6.8p1.bb
deleted file mode 100644
index b00ef6f..0000000
--- a/recipes-connectivity/openssh/openssh/openssh_6.8p1.bb
+++ /dev/null
@@ -1,148 +0,0 @@
-SUMMARY = "Secure rlogin/rsh/rcp/telnet replacement"
-DESCRIPTION = "Secure rlogin/rsh/rcp/telnet replacement (OpenSSH) \
-Ssh (Secure Shell) is a program for logging into a remote machine \
-and for executing commands on a remote machine."
-HOMEPAGE = "http://openssh.org"
-SECTION = "console/network"
-LICENSE = "BSD"
-LIC_FILES_CHKSUM = "file://LICENCE;md5=e326045657e842541d3f35aada442507"
-
-DEPENDS = "zlib openssl"
-DEPENDS += "${@bb.utils.contains('DISTRO_FEATURES', 'pam', 'libpam', '', d)}"
-
-SRC_URI = "ftp://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-${PV}.tar.gz \
- file://sshd_config \
- file://ssh_config \
- file://init \
- ${@bb.utils.contains('DISTRO_FEATURES', 'pam', '${PAM_SRC_URI}', '', d)} \
- file://sshd.socket \
- file://sshd@.service \
- file://sshdgenkeys.service \
- file://volatiles.99_sshd \
- file://add-test-support-for-busybox.patch \
- file://run-ptest"
-
-PAM_SRC_URI = "file://sshd"
-
-SRC_URI[md5sum] = "08f72de6751acfbd0892b5f003922701"
-SRC_URI[sha256sum] = "3ff64ce73ee124480b5bf767b9830d7d3c03bbcb6abe716b78f0192c37ce160e"
-
-inherit useradd update-rc.d update-alternatives systemd
-
-USERADD_PACKAGES = "${PN}-sshd"
-USERADD_PARAM_${PN}-sshd = "--system --no-create-home --home-dir /var/run/sshd --shell /bin/false --user-group sshd"
-INITSCRIPT_PACKAGES = "${PN}-sshd"
-INITSCRIPT_NAME_${PN}-sshd = "sshd"
-INITSCRIPT_PARAMS_${PN}-sshd = "defaults 9"
-
-SYSTEMD_PACKAGES = "${PN}-sshd"
-SYSTEMD_SERVICE_${PN}-sshd = "sshd.socket"
-
-inherit autotools-brokensep ptest
-
-# LFS support:
-CFLAGS += "-D__FILE_OFFSET_BITS=64"
-
-# login path is hardcoded in sshd
-EXTRA_OECONF = "'LOGIN_PROGRAM=${base_bindir}/login' \
- ${@bb.utils.contains('DISTRO_FEATURES', 'pam', '--with-pam', '--without-pam', d)} \
- --without-zlib-version-check \
- --with-privsep-path=/var/run/sshd \
- --sysconfdir=${sysconfdir}/ssh \
- --with-xauth=/usr/bin/xauth \
- --disable-strip \
- "
-
-# Since we do not depend on libbsd, we do not want configure to use it
-# just because it finds libutil.h. But, specifying --disable-libutil
-# causes compile errors, so...
-CACHED_CONFIGUREVARS += "ac_cv_header_bsd_libutil_h=no ac_cv_header_libutil_h=no"
-
-# passwd path is hardcoded in sshd
-CACHED_CONFIGUREVARS += "ac_cv_path_PATH_PASSWD_PROG=${bindir}/passwd"
-
-# We don't want to depend on libblockfile
-CACHED_CONFIGUREVARS += "ac_cv_header_maillock_h=no"
-
-# This is a workaround for uclibc because including stdio.h
-# pulls in pthreads.h and causes conflicts in function prototypes.
-# This results in compilation failure, so unless this is fixed,
-# disable pam for uclibc.
-EXTRA_OECONF_append_libc-uclibc=" --without-pam"
-
-do_configure_prepend () {
- export LD="${CC}"
- install -m 0644 ${WORKDIR}/sshd_config ${B}/
- install -m 0644 ${WORKDIR}/ssh_config ${B}/
- if [ ! -e acinclude.m4 -a -e aclocal.m4 ]; then
- cp aclocal.m4 acinclude.m4
- fi
-}
-
-do_install_append () {
- if [ "${@bb.utils.contains('DISTRO_FEATURES', 'pam', 'pam', '', d)}" = "pam" ]; then
- install -D -m 0755 ${WORKDIR}/sshd ${D}${sysconfdir}/pam.d/sshd
- sed -i -e 's:#UsePAM no:UsePAM yes:' ${WORKDIR}/sshd_config ${D}${sysconfdir}/ssh/sshd_config
- fi
-
- install -d ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/sshd
- rm -f ${D}${bindir}/slogin ${D}${datadir}/Ssh.bin
- rmdir ${D}${localstatedir}/run/sshd ${D}${localstatedir}/run ${D}${localstatedir}
- install -d ${D}/${sysconfdir}/default/volatiles
- install -m 644 ${WORKDIR}/volatiles.99_sshd ${D}/${sysconfdir}/default/volatiles/99_sshd
- install -m 0755 ${S}/contrib/ssh-copy-id ${D}${bindir}
-
- # Create config files for read-only rootfs
- install -d ${D}${sysconfdir}/ssh
- install -m 644 ${D}${sysconfdir}/ssh/sshd_config ${D}${sysconfdir}/ssh/sshd_config_readonly
- sed -i '/HostKey/d' ${D}${sysconfdir}/ssh/sshd_config_readonly
- echo "HostKey /var/run/ssh/ssh_host_rsa_key" >> ${D}${sysconfdir}/ssh/sshd_config_readonly
- echo "HostKey /var/run/ssh/ssh_host_dsa_key" >> ${D}${sysconfdir}/ssh/sshd_config_readonly
- echo "HostKey /var/run/ssh/ssh_host_ecdsa_key" >> ${D}${sysconfdir}/ssh/sshd_config_readonly
-
- install -d ${D}${systemd_unitdir}/system
- install -c -m 0644 ${WORKDIR}/sshd.socket ${D}${systemd_unitdir}/system
- install -c -m 0644 ${WORKDIR}/sshd@.service ${D}${systemd_unitdir}/system
- install -c -m 0644 ${WORKDIR}/sshdgenkeys.service ${D}${systemd_unitdir}/system
- sed -i -e 's,@BASE_BINDIR@,${base_bindir},g' \
- -e 's,@SBINDIR@,${sbindir},g' \
- -e 's,@BINDIR@,${bindir},g' \
- ${D}${systemd_unitdir}/system/sshd.socket ${D}${systemd_unitdir}/system/*.service
-}
-
-do_install_ptest () {
- sed -i -e "s|^SFTPSERVER=.*|SFTPSERVER=${libdir}/${PN}/sftp-server|" regress/test-exec.sh
- cp -r regress ${D}${PTEST_PATH}
-}
-
-ALLOW_EMPTY_${PN} = "1"
-
-PACKAGES =+ "${PN}-keygen ${PN}-scp ${PN}-ssh ${PN}-sshd ${PN}-sftp ${PN}-misc ${PN}-sftp-server"
-FILES_${PN}-scp = "${bindir}/scp.${BPN}"
-FILES_${PN}-ssh = "${bindir}/ssh.${BPN} ${sysconfdir}/ssh/ssh_config"
-FILES_${PN}-sshd = "${sbindir}/sshd ${sysconfdir}/init.d/sshd ${systemd_unitdir}/system"
-FILES_${PN}-sshd += "${sysconfdir}/ssh/moduli ${sysconfdir}/ssh/sshd_config ${sysconfdir}/ssh/sshd_config_readonly ${sysconfdir}/default/volatiles/99_sshd ${sysconfdir}/pam.d/sshd"
-FILES_${PN}-sftp = "${bindir}/sftp"
-FILES_${PN}-sftp-server = "${libexecdir}/sftp-server"
-FILES_${PN}-misc = "${bindir}/ssh* ${libexecdir}/ssh*"
-FILES_${PN}-keygen = "${bindir}/ssh-keygen"
-
-RDEPENDS_${PN} += "${PN}-scp ${PN}-ssh ${PN}-sshd ${PN}-keygen"
-RDEPENDS_${PN}-sshd += "${PN}-keygen ${@bb.utils.contains('DISTRO_FEATURES', 'pam', 'pam-plugin-keyinit pam-plugin-loginuid', '', d)}"
-RDEPENDS_${PN}-ptest += "${PN}-sftp ${PN}-misc ${PN}-sftp-server make"
-
-RPROVIDES_${PN}-ssh = "ssh"
-RPROVIDES_${PN}-sshd = "sshd"
-
-RCONFLICTS_${PN} = "dropbear"
-RCONFLICTS_${PN}-sshd = "dropbear"
-RCONFLICTS_${PN}-keygen = "ssh-keygen"
-
-CONFFILES_${PN}-sshd = "${sysconfdir}/ssh/sshd_config"
-CONFFILES_${PN}-ssh = "${sysconfdir}/ssh/ssh_config"
-
-ALTERNATIVE_PRIORITY = "90"
-ALTERNATIVE_${PN}-scp = "scp"
-ALTERNATIVE_${PN}-ssh = "ssh"
-