summaryrefslogtreecommitdiff
path: root/release-notes
diff options
context:
space:
mode:
Diffstat (limited to 'release-notes')
-rw-r--r--release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt4
-rw-r--r--release-notes/Colibri_iMX6_LinuxReleaseNotesV2.x.txt181
2 files changed, 183 insertions, 2 deletions
diff --git a/release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt b/release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt
index 71f528c..8835b8a 100644
--- a/release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt
+++ b/release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt
@@ -489,7 +489,7 @@ Flash eMMC:
- EvalBoard V3.1a
- connect serial debug console to UARTA aka FFUART (lower X25) resp. X27
using null modem RS-232 or regular USB cable
- - insert above prepared SD card into SD/MMC 8bit (X18) or SD/MMC 4bit (X19) socket
+ - insert above prepared SD card into SD/MMC socket (X15)
- Iris V1.1a
- connect serial debug console to UARTA aka FFUART X13 using null modem RS-232 cable and a
10 pin IDC to 9 pin D-sub male connector. (DTK or Intel standard)
@@ -539,4 +539,4 @@ If the boot loader on the module got corrupted this recovers it by loading U-Boo
- run ./update.sh -d
- stop at the U-Boot prompt and begin the update as stated above
-Toradex, November 19, 2014
+Toradex, December 2, 2014
diff --git a/release-notes/Colibri_iMX6_LinuxReleaseNotesV2.x.txt b/release-notes/Colibri_iMX6_LinuxReleaseNotesV2.x.txt
new file mode 100644
index 0000000..709953d
--- /dev/null
+++ b/release-notes/Colibri_iMX6_LinuxReleaseNotesV2.x.txt
@@ -0,0 +1,181 @@
+*************************************************
+Release Notes: Linux Image V2.x for Colibri iMX6
+*************************************************
+
+Contents:
+- U-Boot 2014.04 boot loader
+- Linux 3.10.17 kernel, based on Freescale's BSP release imx_3.10.17_1.0.1_ga
+ and patches from Boundary Devices
+- Angstrom/OpenEmbedded/Yocto 2014.06/daisy/1.6 based root file system, using
+ LXDE desktop environment
+
+==> Flashing instructions can be found at the very bottom of this release notes
+
+Licensing:
+- proprietary multimedia codecs included for evaluation purpose only
+- customer required to obtain proper re-distribution license
+
+********************************************************************************
+Linux Image V2.3 Beta 4 (November 13, 2014)
+- U-Boot:
+ - initial release
+- Linux kernel:
+ - initial release
+- rootfs / oe-core:
+ - initial release
+ - uses ARMv7 hard-float Thumb2 builds (armv7at2hf-vfp-neon)
+- sources git.toradex.com tag Apalis_iMX6_LinuxImageV2.3Beta3_20141031
+ - repository linux-toradex branch toradex_imx_3.10.17_1.0.0_ga
+ - repository u-boot-toradex branch 2014.04-toradex
+
+Known Issues:
+- connecting an analogue mic to the on module codec resets the codec, so that
+ neither headphone out nor mic in works anymore. Workaround: Have mic
+ connected before boot or change the output source between DAC/LineIn
+- on first boot the resizing process adversely affects system performance for
+ the first few minutes until completed
+- Display resolution can be set for some output configurations, set the U-Boot
+ environment variable vidargs accordingly. Some vidargs_xx variables
+ provided for reference.
+- X uses only the fb0 device
+- due to the flash_eth.img update script currently being broken please use the
+ SD card flashing method (e.g. flash_mmc.img) for now
+
+********************************************************************************
+Notes:
+- 115200 baud serial debug console on UARTA aka FFUART (lower X25 on
+ EvalBoards resp. X27 on V3.1a depending on JP17/19, X13 on Iris)
+- user account: root with empty password
+- eMMC: partition 1: vfat with kernel, partition 2 ext3 root file system
+- opkg package manager
+- HDMI aka DVI-D: not all pixel clock frequencies allow for HDMI audio
+- Linux host used for update preparation requires proper 32-bit execution
+ environment (e.g. install ia32-libs on 64-bit Ubuntu) and awk (e.g. install
+ gawk on Ubuntu)
+
+Working on latest image:
+- U-Boot boot loader
+ - environment storage in eMMC
+ - Ethernet
+ - MMC/SD cards
+ - eMMC flash
+ - serial console debug UARTA
+ - Toradex Colibri configuration block handling
+ - USB storage as host on USB host ports
+- Linux kernel
+ - GPIOlib /sys/class/gpio
+ - PWM LEDs /sys/class/leds/
+ - temperature sensor CPU /sys/devices/virtual/thermal/thermal_zone0/temp
+ Board: /sys/devices/soc0/soc.1/2100000.aips-bus/21a4000.i2c/i2c-1/1-0041/stmpe-adc/iio:device0/in_temp8_raw
+ - Ethernet
+ - eMMC ext3
+ - serial console debug UARTA
+ - UARTB, UARTC
+ - optional RS485
+ - I2C via /dev/i2c-X
+ - 4-bit SD card mmc1
+ - HDMI audio
+ - analogue audio playback and capture, resistive touch
+ - optional S/PDIF, disabled in device tree
+ - SPI via /dev/spidev32766.0
+ - custom Ethernet MAC Address
+ - USB host port
+ - USB audio driver
+ - USB webcam
+ - USB raw HID device /dev/hidrawX
+ - USB device Ethernet RNDIS
+ - analog input via IIO framework
+ - DVFS power management
+- Linux user-space
+ - Firefox browser
+ - Gstreamer playback
+ - OpenGL, but thermal issues if running full speed
+ - LXDE
+ - resize rootfs partition to full eMMC capacity
+- Display:
+ - only first output used by X11
+ - backlight PWM
+ - dual output on HDMI and parallel RGB, HDMI 1920x1080, RGB 800x480
+ - single output on EDT 7" Display
+ - single output to analog RGB, aka VGA output
+ - resolution setting through modedb string in kernel command line (working
+ resolutions to be tested)
+
+Not working or not tested:
+- U-Boot boot loader
+ - framebuffer support
+ - USB OTG1 support
+- Linux kernel
+ - automatic USB device/host/suspend detection aka full OTG support
+ - CSI2 camera interface
+ - CAN via can0 and can1, disabled in device tree
+ - IrDA
+ - parallel camera interface
+ - RS-422
+ - serial number and board revision
+ - SIM card
+ - suspend LP1 (issue with X/fb setup after wakeup)
+ - watchdog
+- Linux user-space
+ - Gstreamer encoding (not tested)
+- Display:
+ - on same monitors HDMI EDID does not negotiate correct timings,
+ adding mxc_hdmi.only_cea=1 to the kernel command line may help
+ - more than one framebuffer used as a X screen
+ - DSI output
+
+**************************************************************************
+eMMC Boot: Colibri iMX6S 256MB V1.0a (Sample), iMX6DL 512MB V1.0a (Sample)
+**************************************************************************
+
+Initial Preparation:
+- download and extract Colibri_iMX6_LinuxImageVx.yz.tar.bz2 package with root
+ permissions
+- use any VFAT formatted SD resp. micro D card with at least 1000 MB of free
+ space
+- run update.sh script with optional -o argument pointing to mount point of
+ above mentioned card
+
+Flash eMMC:
+- EvalBoard V3.1a
+ - connect serial debug console to UARTA aka FFUART (lower X25) resp. X27
+ using null modem RS-232 or regular USB cable
+ - insert above prepared SD card into SD/MMC socket (X15)
+- Iris V1.1a
+ - connect serial debug console to UARTA aka FFUART X13 using null modem RS-232 cable and a
+ 10 pin IDC to 9 pin D-sub male connector. (DTK or Intel standard)
+ - insert above prepared micro SD card into micro SD card socket (X10)
+- Boot to U-Boot prompt and start the update:
+ - apply power or reset
+ - hit any key to stop auto booting
+ - use 'run setupdate' U-Boot command and then
+ - use 'run update' U-Boot command
+
+Boot from eMMC:
+- above given update command should automatically perform a soft re-boot upon successful completion
+- optionally power cycle
+- upon first boot post-install scripts are run which takes around 2 minutes,
+ please be patient
+
+If the boot loader on the module got corrupted this recovers it by loading U-Boot
+ over USB into the module's RAM and executing it there:
+- EvalBoard V3.1a
+ - connect USB B (X29) or USB micro A/B (X30) to development workstation using
+ regular or micro USB cable
+ - the jumper JP2 must be open
+ - connect serial debug console as stated above
+- Iris V1.1a
+ - connect USB micro A/B (X12) to development workstation using regular micro USB
+ cable
+ - connect serial debug console as stated above
+(other carrier boards see http://developer.toradex.com/knowledge-base/colibri-recovery-mode)
+- make sure that the carrier board supports USB high speed
+ - Iris & EvalBoard V3.1a OK, for other carrier boards see
+ http://developer.toradex.com/knowledge-base/usb-2.0-high-speed-%28480mbps%29
+- have the module in recovery mode and load U-Boot over USB to the module's RAM:
+ - lsusb should show a 15a2:0054 Freescale Semiconductor, Inc. device if
+ the module is in recovery mode
+ - run ./update.sh -d
+ - stop at the U-Boot prompt and begin the update as stated above
+
+Toradex, December 2, 2014