| Age | Commit message (Collapse) | Author |
|---|
|
The machine configurations provide a list of built device tree files.
Use said variable to modify update.sh rather than maintaining the same
list in the machine configuartion and update.sh.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Switch to the generic compressed Kernel image type (zImage) instead of
the U-Boot specific uImage format.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@gmail.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Move from a recovery u-boot.imx to download first the SPL which
immediately goes into SDP download mode again and then download
u-boot.img.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
If a dtb file has more than one dot the current logic fails.
e.g. 'device.tree.dtb' will be truncated at the first dot to 'device'
while it should be 'device.tree'.
Fix by removing awk in favour of letting basename also remove
the .dtb extension.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Use ext4 by default for iMX6 modules.
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
Deploy Ixora V1.1 device tree for Apalis iMX6.
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
Deploy Aster device tree for Colibri iMX6.
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Before using the SPL to setup the DDR we had two U-Boot variants for
Apalis iMX6, one for the commercial and one for the industrial
temperature range modules.
With the SPL that is decided at runtime and one does not need to
run a module specific 'run updateXXX' command.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Our current update procedure reads the rootfs payload in pre
split files of 64 MB size. However due to the workaround for
u-boot counting in hex and split did in decimal, the number of
chunks is limited to 89 resulting in a maximum size of 5.5GB.
Update the u-boot counting procedure to count in 3 digits from
the current 2 digits. This allows more than 800 plus chunks
which should take care of rootfs size and any future eMMC
update requirements.
Signed-off-by: Sanchayan Maity <sanchayan.maity@toradex.com>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
Now that we split the rootfs file by default for both Ethernet as
well as SD card update, it is no longer required to deploy the
rootfs.ext3 file which also saves space. Only deploy the split
rootfs files.
Signed-off-by: Sanchayan Maity <sanchayan.maity@toradex.com>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
Our current update procedure requires the rootfs payload to fit in
one file on a FAT filesystem. This limits its usable size to 4GB.
Use the process of splitting up the files in 64MB chunks and then
doing the update which is also what the Ethernet update scripts
currently follow.
However due to the workaround for u-boot counting in hex and split
did in decimal, the number of chunks is limited to 89 resulting in
a maximum size of 5.5GB. We will remove the limitation in a follow
up patch.
Signed-off-by: Sanchayan Maity <sanchayan.maity@toradex.com>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
This changes the update scripts for a system which boots an SPL into
static RAM which configures the DDR RAM, loads U-Boot proper into DDR
and passes execution to U-Boot.
The SPL is only written by the explicit update_spl command or when the
script does not find a valid U-Boot in eMMC.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
|
|
This requires to adjust the path to include files, e.g.:
-require recipes/images/trdx-image-fstype.inc
+require recipes-images/images/trdx-image-fstype.inc
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
|
