From 3d160f41c158c01ef3ed68ce4cc758f6d9c39fbf Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 22 May 2015 16:05:18 +0200 Subject: updated release notes --- release-notes/Colibri_iMX6_LinuxReleaseNotesV2.x.txt | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'release-notes/Colibri_iMX6_LinuxReleaseNotesV2.x.txt') diff --git a/release-notes/Colibri_iMX6_LinuxReleaseNotesV2.x.txt b/release-notes/Colibri_iMX6_LinuxReleaseNotesV2.x.txt index 09e5b2c..a5ac935 100644 --- a/release-notes/Colibri_iMX6_LinuxReleaseNotesV2.x.txt +++ b/release-notes/Colibri_iMX6_LinuxReleaseNotesV2.x.txt @@ -6,7 +6,7 @@ Contents: - U-Boot 2015.04 boot loader - Linux 3.10.17 kernel, based on Freescale's BSP release imx_3.10.17_1.0.2_ga and patches from Boundary Devices -- Angstrom/OpenEmbedded/Yocto 2014.12/dizzy/1.7 based root file system, using +- Angstrom 2014.12/OpenEmbedded dizzy/Yocto 1.7 based root file system, using LXDE desktop environment ==> Flashing instructions can be found at the very bottom of this release notes @@ -226,8 +226,9 @@ Initial Preparation: Flash eMMC: - EvalBoard V3.1a - - connect serial debug console to UARTA aka FFUART (lower X25) resp. X27 - using null modem RS-232 or regular USB cable + - depending on JP17/19 connect serial debug console to UARTA aka FFUART + (lower X25) using null modem RS-232 cable resp. X27 using a regular USB + cable - insert above prepared SD card into SD/MMC socket (X15) - Iris V1.1a - connect serial debug console to UARTA aka FFUART X13 using null modem RS-232 cable and a @@ -273,4 +274,4 @@ If the boot loader on the module got corrupted this recovers it by loading U-Boo - run ./update.sh -d - stop at the U-Boot prompt and begin the update as stated above -Toradex, May 19, 2015 +Toradex, May 22, 2015 -- cgit v1.2.3