************************************************* Release Notes: Linux Image V2.x for Colibri iMX7 ************************************************* Contents: - U-Boot 2015.04 boot loader - Linux 3.14.52 kernel, based on Freescale's BSP release imx_3.14.52_1.1.0_ga - Angstrom 2015.12/OpenEmbedded jethro/Yocto 2.0 based root file system, using LXDE desktop environment ==> Flashing instructions can be found on the Toradex developer article: http://developer.toradex.com/knowledge-base/flashing-linux-on-imx7-modules Licensing: - proprietary multimedia codecs included for evaluation purpose only - customer required to obtain proper re-distribution license ******************************************************************************** Linux Image V2.6 Alpha 1 (March 15, 2016) - U-Boot: - initial release - Linux kernel: - initial release - rootfs / oe-core: - initial release - uses ARMv7 hard-float Thumb2 builds (armv7at2hf-vfp-neon) - sources git.toradex.com tag Colibri_iMX7_LinuxImageV2.6Alpha1_20160315 - repository linux-toradex branch toradex_imx_3.14.52_1.1.0_ga - repository u-boot-toradex branch 2015.04-toradex Known Issues: - poweroff and reboot does not work as expected - display resolution can be set in the device tree - flashing the ubifs rootfs with U-Boot may fail depending on HW - FreeRTOS firmwares for Cortex-M4 core cause Linux to freeze during boot-up (resolved in latest kernel version toradex_imx_3.14.52_1.1.0_ga-next branch) ******************************************************************************** Notes: - 115200 baud serial debug console on UARTA aka FFUART (lower X25 on EvalBoards resp. X27 on V3.1a depending on JP17/19, X13 on Iris) without any handshake - user account: root with empty password - UBIFS flash root file system - opkg package manager - Linux host used for update preparation requires proper 32-bit execution environment (e.g. install ia32-libs on 64-bit Ubuntu) and awk (e.g. install gawk on Ubuntu) Working on latest image: - U-Boot boot loader - environment storage in NAND flash - Ethernet - MMC/SD cards - NAND flash - RAM size auto detection - serial console debug UARTA - Toradex Colibri configuration block handling - module type auto detection - USB storage as host on USBH port (i.MX7 Dual only) - USB storage as host on USBC port - framebuffer support - Linux kernel - analogue audio playback and capture, resistive touch - analogue input via IIO framework /sys/bus/iio/devices/iio:device0 Note the 1.8 volt full scale limitation! - DVFS power management (i.MX 7Dual only) - Ethernet eth0 - custom Ethernet MAC address - framebuffer console - GPIOlib /sys/class/gpio - I2C via /dev/i2c-X - NAND flash MTD/UBI/UBIFS with hardware ECC - PWMs /sys/class/pwm - RTC (i.MX 7 internal and board level I2C RTC) - 4-bit MMC/SD card ESDHC2 - SPI (ECSPI) via /dev/spidev2.0 - suspend LP1 - CPU temperature sensor via hwmon /sys/class/hwmon/hwmon0/temp1_input - serial console debug UARTA ttymxc0 - serial UARTA/UARTB and UARTC, including RTS/CTS, ttymxc0/1/2 - USB host port (Note, i.MX 7Solo only on USBC port) - USB audio driver - Linux user-space - graphics (LCDIF aka parallel RGB) - Firefox browser - LXDE desktop environment - Display: - backlight PWM with PWM - resolution setting via device tree nodes Not working or not tested: - U-Boot boot loader - USB keyboard - USB device firmware upgrade (DFU) as device on USB OTG port - Linux kernel - CAN via MCP2515 - optional CAN via flexcan can0 and can1, disabled in device tree - IrDA - parallel bus - optional parallel camera interface - RS-422/485 - serial number and board revision (not currently handed over by U-Boot) - module temperature sensor - USB webcam - USB raw HID device /dev/hidrawX - USB device, ACM, Ethernet CDC, RNDIS - automatic USB device/host detection aka OTG support - watchdog - Linux user-space - GPIO config tool not available ****************************************************************************** Toradex, June 7, 2016