diff options
| author | Dave Liu <daveliu@freescale.com> | 2010-04-29 17:16:25 +0800 |
|---|---|---|
| committer | Scott Sweeny <scott.sweeny@timesys.com> | 2010-09-30 11:17:16 -0400 |
| commit | a4f510740875b9ceed882d6413d475f4f6befe03 (patch) | |
| tree | 67b7497c2a68c2655d715c5e5359f763105af24a | |
| parent | 04cbb96db06c5a1fba1a80d00f322b25ab656ede (diff) | |
p1022ds: Fix the DIU issue on RevB1 board2009.11-p1022ds-201004291116
DIU doesn't work on P1022DS RevB1 board in u-boot, it is because
there are two code bugs in DIU code.
1) We must clear the PMUXCR[eLBC_DIU] bits before we set the
eLBC_DIU=2'b01 for DIU mode.
The PMUXCR[eLBC_DIU] POR value is 2'b10 in RevB1 board, however
the eLBC_DIU is 2'b00 in RevA board due to design issue.
2) We must do dummy read to make sure the write FPGA PIXIS register
be completed.
Signed-off-by: Dave Liu <daveliu@freescale.com>
| -rw-r--r-- | board/freescale/p1022ds/p1022ds_diu.c | 7 |
1 files changed, 4 insertions, 3 deletions
diff --git a/board/freescale/p1022ds/p1022ds_diu.c b/board/freescale/p1022ds/p1022ds_diu.c index af0bcb77fe..b2f210a709 100644 --- a/board/freescale/p1022ds/p1022ds_diu.c +++ b/board/freescale/p1022ds/p1022ds_diu.c @@ -91,12 +91,13 @@ void p1022ds_diu_init(void) tmp_val_brdcfg0 = in_8(pixis_base + PIXIS_BRDCFG0); tmp_val_brdcfg0 = (tmp_val_brdcfg0 & 0x3D) | 0x02; out_8(pixis_base + PIXIS_BRDCFG0, tmp_val_brdcfg0); + /* we must do the dummy read from eLBC to sync the write as above */ + in_8(pixis_base + PIXIS_BRDCFG0); /* Setting PMUXCR to switch to DVI from ELBC */ /* Set pmuxcr to allow both i2c1 and i2c2 */ - gur->pmuxcr |= 0x40000000; - tmp = gur->pmuxcr; - + clrsetbits_be32(&gur->pmuxcr, 0xc0000000, 0x40000000); + tmp = in_be32(&gur->pmuxcr); fsl_diu_init(xres, pixel_format, gamma_fix, (unsigned char *)FSL_Logo_BMP); } |