summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRob Herring <rob.herring@calxeda.com>2013-10-04 08:40:05 -0500
committerTom Rini <trini@ti.com>2013-11-04 11:06:16 -0500
commitf232950f82d11d411ad29663d98851ac02fd29fb (patch)
treed01622c8e1098cfb3341b7e2072252f37407f6e5
parentcdb23792e864153b0c2b943bf011f10c7ba190e1 (diff)
config: remove platform CONFIG_SYS_HZ definition part 2/2
Remove platform CONFIG_SYS_HZ definition for configs a-z*. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
-rw-r--r--arch/arm/include/asm/arch-lpc32xx/config.h3
-rw-r--r--arch/blackfin/include/asm/config.h7
-rw-r--r--include/configs/a320evb.h1
-rw-r--r--include/configs/a3m071.h1
-rw-r--r--include/configs/a4m072.h2
-rw-r--r--include/configs/ac14xx.h3
-rw-r--r--include/configs/actux1.h1
-rw-r--r--include/configs/actux2.h1
-rw-r--r--include/configs/actux3.h1
-rw-r--r--include/configs/actux4.h1
-rw-r--r--include/configs/adp-ag101.h6
-rw-r--r--include/configs/adp-ag101p.h6
-rw-r--r--include/configs/adp-ag102.h6
-rw-r--r--include/configs/aev.h2
-rw-r--r--include/configs/afeb9260.h1
-rw-r--r--include/configs/alpr.h2
-rw-r--r--include/configs/am3517_crane.h1
-rw-r--r--include/configs/am3517_evm.h1
-rw-r--r--include/configs/am43xx_evm.h1
-rw-r--r--include/configs/amcc-common.h2
-rw-r--r--include/configs/ap325rxa.h1
-rw-r--r--include/configs/ap_sh4a_4a.h1
-rw-r--r--include/configs/aria.h2
-rw-r--r--include/configs/armadillo-800eva.h1
-rw-r--r--include/configs/arndale.h2
-rw-r--r--include/configs/astro_mcf5373l.h2
-rw-r--r--include/configs/at91rm9200ek.h1
-rw-r--r--include/configs/at91sam9260ek.h1
-rw-r--r--include/configs/at91sam9261ek.h1
-rw-r--r--include/configs/at91sam9263ek.h1
-rw-r--r--include/configs/at91sam9m10g45ek.h1
-rw-r--r--include/configs/at91sam9n12ek.h1
-rw-r--r--include/configs/at91sam9rlek.h1
-rw-r--r--include/configs/at91sam9x5ek.h1
-rw-r--r--include/configs/atc.h2
-rw-r--r--include/configs/atngw100.h2
-rw-r--r--include/configs/atngw100mkii.h6
-rw-r--r--include/configs/atstk1002.h6
-rw-r--r--include/configs/atstk1003.h6
-rw-r--r--include/configs/atstk1004.h6
-rw-r--r--include/configs/atstk1006.h5
-rw-r--r--include/configs/calimain.h1
-rw-r--r--include/configs/cam_enc_4xx.h1
-rw-r--r--include/configs/canmb.h2
-rw-r--r--include/configs/cgtqmx6eval.h1
-rw-r--r--include/configs/cm4008.h2
-rw-r--r--include/configs/cm41xx.h2
-rw-r--r--include/configs/cm5200.h1
-rw-r--r--include/configs/cm_t35.h1
-rw-r--r--include/configs/cmi_mpc5xx.h2
-rw-r--r--include/configs/cobra5272.h2
-rw-r--r--include/configs/cogent_mpc8260.h2
-rw-r--r--include/configs/cogent_mpc8xx.h2
-rw-r--r--include/configs/colibri_pxa270.h1
-rw-r--r--include/configs/controlcenterd.h1
-rw-r--r--include/configs/coreboot.h1
-rw-r--r--include/configs/corenet_ds.h1
-rw-r--r--include/configs/cpci5200.h2
-rw-r--r--include/configs/cpu9260.h1
-rw-r--r--include/configs/cpuat91.h1
-rw-r--r--include/configs/csb272.h2
-rw-r--r--include/configs/csb472.h1
-rw-r--r--include/configs/da830evm.h1
-rw-r--r--include/configs/da850evm.h1
-rw-r--r--include/configs/davinci_dm355evm.h1
-rw-r--r--include/configs/davinci_dm355leopard.h1
-rw-r--r--include/configs/davinci_dm365evm.h1
-rw-r--r--include/configs/davinci_dm6467evm.h1
-rw-r--r--include/configs/davinci_dvevm.h1
-rw-r--r--include/configs/davinci_schmoogie.h1
-rw-r--r--include/configs/davinci_sffsdr.h1
-rw-r--r--include/configs/davinci_sonata.h1
-rw-r--r--include/configs/dbau1x00.h2
-rw-r--r--include/configs/debris.h1
-rw-r--r--include/configs/devkit8000.h1
-rw-r--r--include/configs/dig297.h1
-rw-r--r--include/configs/digsy_mtc.h2
-rw-r--r--include/configs/dvlhost.h1
-rw-r--r--include/configs/eXalion.h1
-rw-r--r--include/configs/ea20.h1
-rw-r--r--include/configs/eb_cpu5282.h1
-rw-r--r--include/configs/eb_cpux9k2.h1
-rw-r--r--include/configs/ecovec.h1
-rw-r--r--include/configs/edminiv2.h2
-rw-r--r--include/configs/enbw_cmc.h1
-rw-r--r--include/configs/ep8248.h2
-rw-r--r--include/configs/ep8260.h2
-rw-r--r--include/configs/ep82xxm.h2
-rw-r--r--include/configs/espt.h1
-rw-r--r--include/configs/ethernut5.h1
-rw-r--r--include/configs/exynos5250-dt.h2
-rw-r--r--include/configs/favr-32-ezkit.h6
-rw-r--r--include/configs/flea3.h2
-rw-r--r--include/configs/galaxy5200.h1
-rw-r--r--include/configs/gr_cpci_ax2000.h2
-rw-r--r--include/configs/gr_ep2s60.h2
-rw-r--r--include/configs/gr_xc3s_1500.h2
-rw-r--r--include/configs/grasshopper.h6
-rw-r--r--include/configs/grsim.h2
-rw-r--r--include/configs/grsim_leon2.h2
-rw-r--r--include/configs/gw8260.h1
-rw-r--r--include/configs/h2200.h2
-rw-r--r--include/configs/hammerhead.h2
-rw-r--r--include/configs/hawkboard.h1
-rw-r--r--include/configs/hermes.h2
-rw-r--r--include/configs/highbank.h2
-rw-r--r--include/configs/hmi1001.h2
-rw-r--r--include/configs/hymod.h2
-rw-r--r--include/configs/igep0033.h1
-rw-r--r--include/configs/igep00x0.h1
-rw-r--r--include/configs/ima3-mx53.h1
-rw-r--r--include/configs/imx27lite-common.h1
-rw-r--r--include/configs/imx31_litekit.h2
-rw-r--r--include/configs/imx31_phycore.h2
-rw-r--r--include/configs/incaip.h2
-rw-r--r--include/configs/inka4x0.h2
-rw-r--r--include/configs/integrator-common.h1
-rw-r--r--include/configs/ipam390.h1
-rw-r--r--include/configs/ipek01.h1
-rw-r--r--include/configs/jadecpu.h1
-rw-r--r--include/configs/jornada.h1
-rw-r--r--include/configs/jupiter.h2
-rw-r--r--include/configs/km/keymile-common.h2
-rw-r--r--include/configs/korat.h2
-rw-r--r--include/configs/kvme080.h1
-rw-r--r--include/configs/kzm9g.h2
-rw-r--r--include/configs/linkstation.h1
-rw-r--r--include/configs/lp8x4x.h5
-rw-r--r--include/configs/lubbock.h1
-rw-r--r--include/configs/lwmon.h2
-rw-r--r--include/configs/lwmon5.h2
-rw-r--r--include/configs/m53evk.h1
-rw-r--r--include/configs/manroland/mpc5200-common.h2
-rw-r--r--include/configs/mcc200.h2
-rw-r--r--include/configs/mcx.h1
-rw-r--r--include/configs/mecp5123.h2
-rw-r--r--include/configs/mecp5200.h2
-rw-r--r--include/configs/meesc.h1
-rw-r--r--include/configs/microblaze-generic.h1
-rw-r--r--include/configs/mimc200.h2
-rw-r--r--include/configs/motionpro.h2
-rw-r--r--include/configs/mpc5121ads.h1
-rw-r--r--include/configs/mpc7448hpc2.h2
-rw-r--r--include/configs/mpc8308_p1m.h1
-rw-r--r--include/configs/mpq101.h1
-rw-r--r--include/configs/mpr2.h1
-rw-r--r--include/configs/ms7720se.h1
-rw-r--r--include/configs/ms7722se.h1
-rw-r--r--include/configs/ms7750se.h1
-rw-r--r--include/configs/muas3001.h2
-rw-r--r--include/configs/munices.h1
-rw-r--r--include/configs/mv-common.h1
-rw-r--r--include/configs/mx1ads.h1
-rw-r--r--include/configs/mx25pdk.h1
-rw-r--r--include/configs/mx31ads.h2
-rw-r--r--include/configs/mx31pdk.h2
-rw-r--r--include/configs/mx35pdk.h2
-rw-r--r--include/configs/mx51_efikamx.h1
-rw-r--r--include/configs/mx51evk.h1
-rw-r--r--include/configs/mx53ard.h1
-rw-r--r--include/configs/mx53evk.h1
-rw-r--r--include/configs/mx53loco.h1
-rw-r--r--include/configs/mx53smd.h1
-rw-r--r--include/configs/mx6qarm2.h1
-rw-r--r--include/configs/mx6sabre_common.h1
-rw-r--r--include/configs/mx6slevk.h1
-rw-r--r--include/configs/mxs.h3
-rw-r--r--include/configs/nhk8815.h1
-rw-r--r--include/configs/nios2-generic.h1
-rw-r--r--include/configs/nitrogen6x.h1
-rw-r--r--include/configs/nokia_rx51.h1
-rw-r--r--include/configs/o2dnt-common.h1
-rw-r--r--include/configs/omap3_beagle.h1
-rw-r--r--include/configs/omap3_evm_common.h1
-rw-r--r--include/configs/omap3_logic.h1
-rw-r--r--include/configs/omap3_mvblx.h1
-rw-r--r--include/configs/omap3_overo.h1
-rw-r--r--include/configs/omap3_pandora.h1
-rw-r--r--include/configs/omap3_sdp3430.h1
-rw-r--r--include/configs/omap3_zoom1.h1
-rw-r--r--include/configs/omap4_common.h1
-rw-r--r--include/configs/omap5912osk.h1
-rw-r--r--include/configs/openrisc-generic.h1
-rw-r--r--include/configs/origen.h2
-rw-r--r--include/configs/otc570.h1
-rw-r--r--include/configs/p1_p2_rdb_pc.h1
-rw-r--r--include/configs/p1_twr.h1
-rw-r--r--include/configs/p3mx.h2
-rw-r--r--include/configs/p3p440.h2
-rw-r--r--include/configs/palmtreo680.h1
-rw-r--r--include/configs/pb1x00.h2
-rw-r--r--include/configs/pcm030.h1
-rw-r--r--include/configs/pcm051.h1
-rw-r--r--include/configs/pcs440ep.h2
-rw-r--r--include/configs/pdm360ng.h1
-rw-r--r--include/configs/pdnb3.h1
-rw-r--r--include/configs/pf5200.h2
-rw-r--r--include/configs/pm9261.h2
-rw-r--r--include/configs/pm9263.h2
-rw-r--r--include/configs/pm9g45.h1
-rw-r--r--include/configs/ppmc7xx.h1
-rw-r--r--include/configs/ppmc8260.h1
-rw-r--r--include/configs/pxa255_idp.h1
-rw-r--r--include/configs/qemu-malta.h1
-rw-r--r--include/configs/qemu-mips.h2
-rw-r--r--include/configs/qemu-mips64.h2
-rw-r--r--include/configs/qong.h2
-rw-r--r--include/configs/quad100hd.h2
-rw-r--r--include/configs/quantum.h2
-rw-r--r--include/configs/r0p7734.h1
-rw-r--r--include/configs/r2dplus.h1
-rw-r--r--include/configs/r7780mp.h1
-rw-r--r--include/configs/rpi_b.h3
-rw-r--r--include/configs/rsdproto.h2
-rw-r--r--include/configs/s5p_goni.h2
-rw-r--r--include/configs/s5pc210_universal.h2
-rw-r--r--include/configs/sacsng.h1
-rw-r--r--include/configs/sama5d3xek.h1
-rw-r--r--include/configs/sandbox.h2
-rw-r--r--include/configs/sbc35_a9g20.h1
-rw-r--r--include/configs/sbc405.h2
-rw-r--r--include/configs/sbc8349.h1
-rw-r--r--include/configs/sbc8548.h1
-rw-r--r--include/configs/sbc8641d.h1
-rw-r--r--include/configs/sc3.h2
-rw-r--r--include/configs/sh7752evb.h1
-rw-r--r--include/configs/sh7757lcr.h1
-rw-r--r--include/configs/sh7763rdp.h1
-rw-r--r--include/configs/sh7785lcr.h1
-rw-r--r--include/configs/shmin.h1
-rw-r--r--include/configs/siemens-am33x-common.h2
-rw-r--r--include/configs/smdk2410.h2
-rw-r--r--include/configs/smdkc100.h2
-rw-r--r--include/configs/smdkv310.h2
-rw-r--r--include/configs/snapper9260.h1
-rw-r--r--include/configs/snowball.h1
-rw-r--r--include/configs/socfpga_cyclone5.h1
-rw-r--r--include/configs/socrates.h1
-rw-r--r--include/configs/spc1920.h2
-rw-r--r--include/configs/spear-common.h1
-rw-r--r--include/configs/spieval.h2
-rw-r--r--include/configs/stamp9g20.h1
-rw-r--r--include/configs/stxgp3.h1
-rw-r--r--include/configs/stxssa.h1
-rw-r--r--include/configs/stxxtc.h2
-rw-r--r--include/configs/svm_sc8xx.h2
-rw-r--r--include/configs/t4qds.h1
-rw-r--r--include/configs/tam3517-common.h1
-rw-r--r--include/configs/tb0229.h2
-rw-r--r--include/configs/tegra-common.h2
-rw-r--r--include/configs/ti814x_evm.h2
-rw-r--r--include/configs/ti816x_evm.h1
-rw-r--r--include/configs/ti_armv7_common.h1
-rw-r--r--include/configs/titanium.h1
-rw-r--r--include/configs/tnetv107x_evm.h1
-rw-r--r--include/configs/tny_a9260.h1
-rw-r--r--include/configs/top9000.h1
-rw-r--r--include/configs/trats.h2
-rw-r--r--include/configs/tricorder.h1
-rw-r--r--include/configs/trizepsiv.h1
-rw-r--r--include/configs/tt01.h2
-rw-r--r--include/configs/tx25.h1
-rw-r--r--include/configs/u8500_href.h1
-rw-r--r--include/configs/uc100.h2
-rw-r--r--include/configs/utx8245.h1
-rw-r--r--include/configs/v37.h2
-rw-r--r--include/configs/v38b.h2
-rw-r--r--include/configs/vct.h1
-rw-r--r--include/configs/ve8313.h1
-rw-r--r--include/configs/vexpress_common.h1
-rw-r--r--include/configs/vf610twr.h1
-rw-r--r--include/configs/virtlab2.h2
-rw-r--r--include/configs/vision2.h1
-rw-r--r--include/configs/vl_ma2sc.h1
-rw-r--r--include/configs/vme8349.h1
-rw-r--r--include/configs/vpac270.h1
-rw-r--r--include/configs/wandboard.h1
-rw-r--r--include/configs/woodburn_common.h3
-rw-r--r--include/configs/x600.h1
-rw-r--r--include/configs/xaeniax.h1
-rw-r--r--include/configs/xilinx-ppc.h1
-rw-r--r--include/configs/xpedite1000.h1
-rw-r--r--include/configs/xpedite517x.h1
-rw-r--r--include/configs/xpedite520x.h1
-rw-r--r--include/configs/xpedite537x.h1
-rw-r--r--include/configs/xpedite550x.h1
-rw-r--r--include/configs/zeus.h2
-rw-r--r--include/configs/zmx25.h1
-rw-r--r--include/configs/zynq.h1
289 files changed, 0 insertions, 453 deletions
diff --git a/arch/arm/include/asm/arch-lpc32xx/config.h b/arch/arm/include/asm/arch-lpc32xx/config.h
index a46baf249c..c985401d3c 100644
--- a/arch/arm/include/asm/arch-lpc32xx/config.h
+++ b/arch/arm/include/asm/arch-lpc32xx/config.h
@@ -15,9 +15,6 @@
#define CONFIG_NR_DRAM_BANKS_MAX 2
-/* 1KHz clock tick */
-#define CONFIG_SYS_HZ 1000
-
/* UART configuration */
#if (CONFIG_SYS_LPC32XX_UART >= 3) && (CONFIG_SYS_LPC32XX_UART <= 6)
#define CONFIG_SYS_NS16550_SERIAL
diff --git a/arch/blackfin/include/asm/config.h b/arch/blackfin/include/asm/config.h
index d870d1224f..1da386ea49 100644
--- a/arch/blackfin/include/asm/config.h
+++ b/arch/blackfin/include/asm/config.h
@@ -155,13 +155,6 @@
#ifndef CONFIG_SYS_MAXARGS
# define CONFIG_SYS_MAXARGS 16
#endif
-#if defined(CONFIG_SYS_HZ)
-# if (CONFIG_SYS_HZ != 1000)
-# warning "CONFIG_SYS_HZ must always be 1000"
-# endif
-# undef CONFIG_SYS_HZ
-#endif
-#define CONFIG_SYS_HZ 1000
/* Blackfin POST tests */
#ifdef CONFIG_POST_BSPEC1_GPIO_LEDS
diff --git a/include/configs/a320evb.h b/include/configs/a320evb.h
index bcb7ab47ba..0d3cf369b6 100644
--- a/include/configs/a320evb.h
+++ b/include/configs/a320evb.h
@@ -37,7 +37,6 @@
/*
* Timer
*/
-#define CONFIG_SYS_HZ 1000 /* timer ticks per second */
/*
* Real Time Clock
diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h
index 10eb970d70..d151869d7b 100644
--- a/include/configs/a3m071.h
+++ b/include/configs/a3m071.h
@@ -264,7 +264,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x00100000
-#define CONFIG_SYS_HZ 1000
#define CONFIG_LOOPW
#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/
diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h
index 39ca2c3eec..64737020f5 100644
--- a/include/configs/a4m072.h
+++ b/include/configs/a4m072.h
@@ -285,8 +285,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#if defined(CONFIG_CMD_KGDB)
# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h
index a2090dac86..1205557d88 100644
--- a/include/configs/ac14xx.h
+++ b/include/configs/ac14xx.h
@@ -440,9 +440,6 @@
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-/* decrementer freq: 1ms ticks */
-#define CONFIG_SYS_HZ 1000
-
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
diff --git a/include/configs/actux1.h b/include/configs/actux1.h
index 878c2b8087..3315f54f38 100644
--- a/include/configs/actux1.h
+++ b/include/configs/actux1.h
@@ -78,7 +78,6 @@
/* timer clock - 2* OSC_IN system clock */
#define CONFIG_IXP425_TIMER_CLK 66666666
-#define CONFIG_SYS_HZ 1000
/* default load address */
#define CONFIG_SYS_LOAD_ADDR 0x00010000
diff --git a/include/configs/actux2.h b/include/configs/actux2.h
index 9560acb59a..fb391ecd59 100644
--- a/include/configs/actux2.h
+++ b/include/configs/actux2.h
@@ -71,7 +71,6 @@
/* timer clock - 2* OSC_IN system clock */
#define CONFIG_IXP425_TIMER_CLK 66666666
-#define CONFIG_SYS_HZ 1000
/* default load address */
#define CONFIG_SYS_LOAD_ADDR 0x00010000
diff --git a/include/configs/actux3.h b/include/configs/actux3.h
index 200653e7f4..61d96f5ed0 100644
--- a/include/configs/actux3.h
+++ b/include/configs/actux3.h
@@ -69,7 +69,6 @@
/* timer clock - 2* OSC_IN system clock */
#define CONFIG_IXP425_TIMER_CLK 66666666
-#define CONFIG_SYS_HZ 1000
/* default load address */
#define CONFIG_SYS_LOAD_ADDR 0x00010000
diff --git a/include/configs/actux4.h b/include/configs/actux4.h
index d8e0de789c..23872794e3 100644
--- a/include/configs/actux4.h
+++ b/include/configs/actux4.h
@@ -76,7 +76,6 @@
/* timer clock - 2* OSC_IN system clock */
#define CONFIG_IXP425_TIMER_CLK 66000000
-#define CONFIG_SYS_HZ 1000
/* default load address */
#define CONFIG_SYS_LOAD_ADDR 0x00010000
diff --git a/include/configs/adp-ag101.h b/include/configs/adp-ag101.h
index 81f71b9b72..e31131f6e2 100644
--- a/include/configs/adp-ag101.h
+++ b/include/configs/adp-ag101.h
@@ -40,12 +40,6 @@
/*
* Timer
*/
-
-/*
- * According to the discussion in u-boot mailing list before,
- * CONFIG_SYS_HZ at 1000 is mandatory.
- */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CLK_FREQ 48000000
#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ
diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h
index 48afbf4467..ded3f331e8 100644
--- a/include/configs/adp-ag101p.h
+++ b/include/configs/adp-ag101p.h
@@ -40,12 +40,6 @@
/*
* Timer
*/
-
-/*
- * According to the discussion in u-boot mailing list before,
- * CONFIG_SYS_HZ at 1000 is mandatory.
- */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CLK_FREQ 39062500
#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ
diff --git a/include/configs/adp-ag102.h b/include/configs/adp-ag102.h
index 681dfa251c..1e4ce2e7d9 100644
--- a/include/configs/adp-ag102.h
+++ b/include/configs/adp-ag102.h
@@ -32,12 +32,6 @@
/*
* Timer
*/
-
-/*
- * According to the discussion in u-boot mailing list before,
- * CONFIG_SYS_HZ at 1000 is mandatory.
- */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CLK_FREQ (66000000 * 2)
#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ
diff --git a/include/configs/aev.h b/include/configs/aev.h
index 6eb56c1c6d..0eafb3ca74 100644
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -337,8 +337,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#if defined(CONFIG_CMD_KGDB)
# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h
index be2f207055..a3e4fd267b 100644
--- a/include/configs/afeb9260.h
+++ b/include/configs/afeb9260.h
@@ -17,7 +17,6 @@
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_MAIN_CLOCK 18429952 /* from 18.432 MHz crystal */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
-#define CONFIG_SYS_HZ 1000
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DISPLAY_CPUINFO
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index 00a5b4515e..2bf1986e3a 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -254,8 +254,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 1fd2508fe9..c5e67bf87d 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -239,7 +239,6 @@
*/
#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
/*-----------------------------------------------------------------------
* Physical Memory Map
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 6500878121..5ff65c6d58 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -231,7 +231,6 @@
*/
#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
/*-----------------------------------------------------------------------
* Physical Memory Map
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 64c48117b8..d9b6c16baa 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -76,7 +76,6 @@
#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550
diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h
index 0c003552df..c9e9a038d4 100644
--- a/include/configs/amcc-common.h
+++ b/include/configs/amcc-common.h
@@ -89,8 +89,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_EXTBDINFO /* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_CMDLINE_EDITING /* add command line history */
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
#define CONFIG_LOOPW /* enable loopw command */
diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h
index 08093f1d32..933de52c56 100644
--- a/include/configs/ap325rxa.h
+++ b/include/configs/ap325rxa.h
@@ -157,6 +157,5 @@
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ 1000
#endif /* __AP325RXA_H */
diff --git a/include/configs/ap_sh4a_4a.h b/include/configs/ap_sh4a_4a.h
index 19d9c90321..83a5c37e43 100644
--- a/include/configs/ap_sh4a_4a.h
+++ b/include/configs/ap_sh4a_4a.h
@@ -160,6 +160,5 @@
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_TMU_CLK_DIV 4
-#define CONFIG_SYS_HZ 1000
#endif /* __AP_SH4A_4A_H */
diff --git a/include/configs/aria.h b/include/configs/aria.h
index ab3348c401..32216cd50e 100644
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -484,8 +484,6 @@
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ 1000
-
/*
* For booting Linux, the board info and command line data
* have to be in the first 256 MB of memory, since this is
diff --git a/include/configs/armadillo-800eva.h b/include/configs/armadillo-800eva.h
index 83bcafead0..e5569c7296 100644
--- a/include/configs/armadillo-800eva.h
+++ b/include/configs/armadillo-800eva.h
@@ -140,6 +140,5 @@
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_TMU_CLK_DIV 4
-#define CONFIG_SYS_HZ 1000
#endif /* __ARMADILLO_800EVA_H */
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index ed44a0424c..45fa047b35 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -144,8 +144,6 @@
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-#define CONFIG_SYS_HZ 1000
-
#define CONFIG_RD_LVL
#define CONFIG_NR_DRAM_BANKS 8
diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h
index f0dd6ccb74..d875753a66 100644
--- a/include/configs/astro_mcf5373l.h
+++ b/include/configs/astro_mcf5373l.h
@@ -110,10 +110,8 @@
/*
* Defines processor clock - important for correct timings concerning serial
* interface etc.
- * CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms
*/
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CLK 80000000
#define CONFIG_SYS_CPU_CLK (CONFIG_SYS_CLK * 3)
#define CONFIG_SYS_SDRAM_SIZE 32 /* SDRAM size in MB */
diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h
index e158b0dd2d..c03f3854ce 100644
--- a/include/configs/at91rm9200ek.h
+++ b/include/configs/at91rm9200ek.h
@@ -43,7 +43,6 @@
#define AT91C_MAIN_CLOCK ((AT91C_XTAL_CLOCK / 4) * 39)
#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3 )
#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2)
-#define CONFIG_SYS_HZ 1000
/* CPU configuration */
#define CONFIG_AT91RM9200
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index d7fd6b089c..ce0ca806fa 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -28,7 +28,6 @@
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */
-#define CONFIG_SYS_HZ 1000
/* Define actual evaluation board type from used processor type */
#ifdef CONFIG_AT91SAM9G20
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index af56604396..fcdf044671 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -14,7 +14,6 @@
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */
-#define CONFIG_SYS_HZ 1000
#ifdef CONFIG_AT91SAM9G10
#define CONFIG_AT91SAM9G10EK /* It's an Atmel AT91SAM9G10 EK*/
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index 40e167c10a..5a39392d67 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -26,7 +26,6 @@
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
-#define CONFIG_SYS_HZ 1000
#define CONFIG_AT91SAM9263EK 1 /* It's an AT91SAM9263EK Board */
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index fc4ecec7ad..2095fe6879 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -21,7 +21,6 @@
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_AT91SAM9M10G45EK
#define CONFIG_AT91FAMILY
diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index 28a79258df..415a997221 100644
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -24,7 +24,6 @@
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000 /* main clock xtal */
-#define CONFIG_SYS_HZ 1000
/* Misc CPU related */
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index b08848ef73..3747098d2a 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -18,7 +18,6 @@
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* main clock xtal */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_AT91SAM9RLEK 1 /* It's an AT91SAM9RLEK Board */
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 4a2ac9aabd..bb126b02b8 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -16,7 +16,6 @@
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_AT91SAM9X5EK
#define CONFIG_AT91FAMILY
diff --git a/include/configs/atc.h b/include/configs/atc.h
index e824c9edf1..fa391b6280 100644
--- a/include/configs/atc.h
+++ b/include/configs/atc.h
@@ -152,8 +152,6 @@
#define CONFIG_SYS_PIO_MODE 0 /* IDE interface in PIO Mode 0 */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 /* "bad" address */
#define CONFIG_SYS_ALLOC_DPRAM
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
index c87e4147cd..597bede85e 100644
--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@@ -15,8 +15,6 @@
#define CONFIG_AT32AP7000
#define CONFIG_ATNGW100
-#define CONFIG_SYS_HZ 1000
-
/*
* Set up the PLL to run at 140 MHz, the CPU to run at the PLL
* frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h
index 8e4ad073cd..bd4dca5217 100644
--- a/include/configs/atngw100mkii.h
+++ b/include/configs/atngw100mkii.h
@@ -18,12 +18,6 @@
#define CONFIG_ATNGW100MKII
/*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ 1000
-
-/*
* Set up the PLL to run at 140 MHz, the CPU to run at the PLL
* frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
* and the PBA bus to run at 1/4 the PLL frequency.
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index 5be563ce0d..fd76572a47 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -17,12 +17,6 @@
#define CONFIG_ATSTK1000
/*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ 1000
-
-/*
* Set up the PLL to run at 140 MHz, the CPU to run at the PLL
* frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
* PLL frequency.
diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h
index a49d0add82..2562460b98 100644
--- a/include/configs/atstk1003.h
+++ b/include/configs/atstk1003.h
@@ -17,12 +17,6 @@
#define CONFIG_ATSTK1000
/*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ 1000
-
-/*
* Set up the PLL to run at 140 MHz, the CPU to run at the PLL
* frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
* PLL frequency.
diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h
index 7f3976c54f..8e32a10b19 100644
--- a/include/configs/atstk1004.h
+++ b/include/configs/atstk1004.h
@@ -17,12 +17,6 @@
#define CONFIG_ATSTK1000
/*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ 1000
-
-/*
* Set up the PLL to run at 140 MHz, the CPU to run at the PLL
* frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
* PLL frequency.
diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h
index 97470dfad8..9ce22649e7 100644
--- a/include/configs/atstk1006.h
+++ b/include/configs/atstk1006.h
@@ -16,11 +16,6 @@
#define CONFIG_ATSTK1006
#define CONFIG_ATSTK1000
-/*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ 1000
/*
* Set up the PLL to run at 140 MHz, the CPU to run at the PLL
diff --git a/include/configs/calimain.h b/include/configs/calimain.h
index d20074c731..febee45b3b 100644
--- a/include/configs/calimain.h
+++ b/include/configs/calimain.h
@@ -31,7 +31,6 @@
#define CONFIG_SYS_OSCIN_FREQ calimain_get_osc_freq()
#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_TEXT_BASE 0x60000000
#define CONFIG_DA850_LOWLEVEL
#define CONFIG_SYS_DA850_PLL_INIT
diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h
index 2e024f54a9..c1042aecbf 100644
--- a/include/configs/cam_enc_4xx.h
+++ b/include/configs/cam_enc_4xx.h
@@ -17,7 +17,6 @@
#define CONFIG_ARM926EJS /* arm926ejs CPU */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SOC_DM365
#define CONFIG_MACH_TYPE MACH_TYPE_DAVINCI_DM365_EVM
diff --git a/include/configs/canmb.h b/include/configs/canmb.h
index eb4fe47f00..d929bde8f2 100644
--- a/include/configs/canmb.h
+++ b/include/configs/canmb.h
@@ -188,8 +188,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h
index 5cf456a78e..d5db8f504f 100644
--- a/include/configs/cgtqmx6eval.h
+++ b/include/configs/cgtqmx6eval.h
@@ -143,7 +143,6 @@
#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h
index 9447c0b935..1cb54b3225 100644
--- a/include/configs/cm4008.h
+++ b/include/configs/cm4008.h
@@ -75,8 +75,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x00008000 /* default load address */
-#define CONFIG_SYS_HZ (1000) /* 1ms resolution ticks */
-
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
diff --git a/include/configs/cm41xx.h b/include/configs/cm41xx.h
index 306684ac0d..adebd4b7b0 100644
--- a/include/configs/cm41xx.h
+++ b/include/configs/cm41xx.h
@@ -75,8 +75,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x00008000 /* default load address */
-#define CONFIG_SYS_HZ (1000) /* 1ms resolution ticks */
-
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h
index a3ebffb2c2..ac3d6bd343 100644
--- a/include/configs/cm5200.h
+++ b/include/configs/cm5200.h
@@ -295,7 +295,6 @@
#define CONFIG_LOOPW 1
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
/*
* Various low-level settings
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index bc5b66c6dc..38fe06407e 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -258,7 +258,6 @@
*/
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
/*-----------------------------------------------------------------------
* Physical Memory Map
diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h
index a3cd2c0910..32cecbdc9c 100644
--- a/include/configs/cmi_mpc5xx.h
+++ b/include/configs/cmi_mpc5xx.h
@@ -96,8 +96,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* Decrementer freq: 1 ms ticks */
-
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 1250000 }
diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index b13898815a..464436930d 100644
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -37,11 +37,9 @@
/* ---
* Defines processor clock - important for correct timings concerning serial
* interface etc.
- * CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms
* ---
*/
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CLK 66000000
#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */
diff --git a/include/configs/cogent_mpc8260.h b/include/configs/cogent_mpc8260.h
index 82be525184..02b25c6444 100644
--- a/include/configs/cogent_mpc8260.h
+++ b/include/configs/cogent_mpc8260.h
@@ -138,8 +138,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/*
diff --git a/include/configs/cogent_mpc8xx.h b/include/configs/cogent_mpc8xx.h
index f7808674ba..c98b687c09 100644
--- a/include/configs/cogent_mpc8xx.h
+++ b/include/configs/cogent_mpc8xx.h
@@ -103,8 +103,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_SYS_ALLOC_DPRAM
diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h
index d26333d990..08bd276b44 100644
--- a/include/configs/colibri_pxa270.h
+++ b/include/configs/colibri_pxa270.h
@@ -100,7 +100,6 @@
/*
* Clock Configuration
*/
-#define CONFIG_SYS_HZ 1000 /* Timer @ 3250000 Hz */
#define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */
/*
diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h
index 8570f2049c..413f0867f4 100644
--- a/include/configs/controlcenterd.h
+++ b/include/configs/controlcenterd.h
@@ -439,7 +439,6 @@
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_HZ 1000
#define CONFIG_HW_WATCHDOG
#define CONFIG_LOADS_ECHO
#define CONFIG_SYS_LOADS_BAUD_CHANGE
diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h
index d1be5e3c0c..556b42a38b 100644
--- a/include/configs/coreboot.h
+++ b/include/configs/coreboot.h
@@ -222,7 +222,6 @@
#define CONFIG_SYS_MEMTEST_START 0x00100000
#define CONFIG_SYS_MEMTEST_END 0x01000000
#define CONFIG_SYS_LOAD_ADDR 0x100000
-#define CONFIG_SYS_HZ 1000
/*-----------------------------------------------------------------------
* SDRAM Configuration
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 5d2d1fe5f5..562caa5845 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -661,7 +661,6 @@
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
/*
* For booting Linux, the board info and command line data
diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index 9e86f09ff2..db5ceadba6 100644
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -267,8 +267,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h
index 5b79ace5fa..021be83437 100644
--- a/include/configs/cpu9260.h
+++ b/include/configs/cpu9260.h
@@ -20,7 +20,6 @@
#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
#if defined(CONFIG_CPU9G20)
diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h
index 6742dbcd92..3572ac57f8 100644
--- a/include/configs/cpuat91.h
+++ b/include/configs/cpuat91.h
@@ -25,7 +25,6 @@
#define AT91C_MAIN_CLOCK ((AT91C_XTAL_CLOCK / 4) * 39)
#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3)
#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2)
-#define CONFIG_SYS_HZ 1000
#define CONFIG_ARM920T
#define CONFIG_AT91RM9200
diff --git a/include/configs/csb272.h b/include/configs/csb272.h
index 304612ff52..ca0bffa72e 100644
--- a/include/configs/csb272.h
+++ b/include/configs/csb272.h
@@ -120,8 +120,6 @@
#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_info (bd_t) */
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
diff --git a/include/configs/csb472.h b/include/configs/csb472.h
index 5617b7198b..596095d21f 100644
--- a/include/configs/csb472.h
+++ b/include/configs/csb472.h
@@ -120,7 +120,6 @@
#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_info (bd_t) */
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h
index 3e71ae5a3e..c4cc62ecb4 100644
--- a/include/configs/da830evm.h
+++ b/include/configs/da830evm.h
@@ -28,7 +28,6 @@
#define CONFIG_SYS_OSCIN_FREQ 24000000
#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_TEXT_BASE 0xc1080000
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 9845506039..509fe20d2c 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -33,7 +33,6 @@
#define CONFIG_SYS_OSCIN_FREQ 24000000
#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_DA850_PLL_INIT
#define CONFIG_SYS_DA850_DDR_INIT
diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h
index 07b1bdd082..6382e75b95 100644
--- a/include/configs/davinci_dm355evm.h
+++ b/include/configs/davinci_dm355evm.h
@@ -18,7 +18,6 @@
#define CONFIG_ARM926EJS /* arm926ejs CPU */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SOC_DM355
/* Memory Info */
diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h
index f7adbd86ce..234bbc0996 100644
--- a/include/configs/davinci_dm355leopard.h
+++ b/include/configs/davinci_dm355leopard.h
@@ -17,7 +17,6 @@
#define CONFIG_ARM926EJS /* arm926ejs CPU */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SOC_DM355 /* DM355 based board */
/* Memory Info */
diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h
index 1f49e514ac..b547289d2d 100644
--- a/include/configs/davinci_dm365evm.h
+++ b/include/configs/davinci_dm365evm.h
@@ -18,7 +18,6 @@
#define CONFIG_ARM926EJS /* arm926ejs CPU */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SOC_DM365
/* Memory Info */
diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h
index 7f57877752..2132342eb7 100644
--- a/include/configs/davinci_dm6467evm.h
+++ b/include/configs/davinci_dm6467evm.h
@@ -27,7 +27,6 @@ extern unsigned int davinci_arm_clk_get(void);
/* Timer Input clock freq */
#define CONFIG_SYS_HZ_CLOCK (CONFIG_SYS_CLK_FREQ/2)
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SOC_DM646X
/* EEPROM definitions for EEPROM */
diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
index ca2cb2db72..d8fa64600a 100644
--- a/include/configs/davinci_dvevm.h
+++ b/include/configs/davinci_dvevm.h
@@ -44,7 +44,6 @@
#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SOC_DM644X
/*====================================================*/
/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
index 299a2e8bb2..f9a0a76d36 100644
--- a/include/configs/davinci_schmoogie.h
+++ b/include/configs/davinci_schmoogie.h
@@ -22,7 +22,6 @@
#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SOC_DM644X
/*=============*/
/* Memory Info */
diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h
index 6ebbe818a5..44449df9cd 100644
--- a/include/configs/davinci_sffsdr.h
+++ b/include/configs/davinci_sffsdr.h
@@ -19,7 +19,6 @@
#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SOC_DM644X
/* EEPROM definitions for Atmel 24LC64 EEPROM chip */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h
index a81364ce55..ac543f8d94 100644
--- a/include/configs/davinci_sonata.h
+++ b/include/configs/davinci_sonata.h
@@ -46,7 +46,6 @@
#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SOC_DM644X
/*====================================================*/
/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h
index 07c60abec4..da4ff8e61d 100644
--- a/include/configs/dbau1x00.h
+++ b/include/configs/dbau1x00.h
@@ -133,8 +133,6 @@
#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
-#define CONFIG_SYS_HZ 1000
-
#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */
diff --git a/include/configs/debris.h b/include/configs/debris.h
index ae1a1b1c51..621f895011 100644
--- a/include/configs/debris.h
+++ b/include/configs/debris.h
@@ -148,7 +148,6 @@
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
/*-----------------------------------------------------------------------
* PCI stuff
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index c1e996e448..8343891cb8 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -257,7 +257,6 @@
*/
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
diff --git a/include/configs/dig297.h b/include/configs/dig297.h
index 08d49fb00d..c19c4c7549 100644
--- a/include/configs/dig297.h
+++ b/include/configs/dig297.h
@@ -239,7 +239,6 @@
*/
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
/*-----------------------------------------------------------------------
* Physical Memory Map
diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h
index ed34101cf2..bc5853eb5c 100644
--- a/include/configs/digsy_mtc.h
+++ b/include/configs/digsy_mtc.h
@@ -415,8 +415,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x00100000
-#define CONFIG_SYS_HZ 1000
-
/*
* Various low-level settings
*/
diff --git a/include/configs/dvlhost.h b/include/configs/dvlhost.h
index ffbc1aa967..87b3314841 100644
--- a/include/configs/dvlhost.h
+++ b/include/configs/dvlhost.h
@@ -77,7 +77,6 @@
/* timer clock - 2* OSC_IN system clock */
#define CONFIG_IXP425_TIMER_CLK 66666666
-#define CONFIG_SYS_HZ 1000
/* default load address */
#define CONFIG_SYS_LOAD_ADDR 0x00010000
diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h
index 07983c135b..ca9792c451 100644
--- a/include/configs/eXalion.h
+++ b/include/configs/eXalion.h
@@ -216,7 +216,6 @@
* (address mappings, register initial values, etc.)
* You should know what you are doing if you make changes here.
*/
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 2 /* for MPC8240 only */
diff --git a/include/configs/ea20.h b/include/configs/ea20.h
index e08423a097..58e40ed888 100644
--- a/include/configs/ea20.h
+++ b/include/configs/ea20.h
@@ -35,7 +35,6 @@
#define CONFIG_SYS_OSCIN_FREQ 24000000
#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_TEXT_BASE 0xc1080000
#define CONFIG_DA8XX_GPIO
diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h
index 08ba883f4c..d1650eea3d 100644
--- a/include/configs/eb_cpu5282.h
+++ b/include/configs/eb_cpu5282.h
@@ -98,7 +98,6 @@
/*----------------------------------------------------------------------*
* Clock and PLL Configuration *
*----------------------------------------------------------------------*/
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CLK 80000000 /* 8MHz * 8 */
/* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
index b8e672f82b..cafaf88d91 100644
--- a/include/configs/eb_cpux9k2.h
+++ b/include/configs/eb_cpux9k2.h
@@ -60,7 +60,6 @@
#define AT91C_MAIN_CLOCK 179404800 /* from 12.288 MHz * 73 / 5 */
#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3)
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2)
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock */
diff --git a/include/configs/ecovec.h b/include/configs/ecovec.h
index 1a3b996c59..335e9cdffa 100644
--- a/include/configs/ecovec.h
+++ b/include/configs/ecovec.h
@@ -181,6 +181,5 @@
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_TMU_CLK_DIV 4
-#define CONFIG_SYS_HZ 1000
#endif /* __ECOVEC_H */
diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index 9c701099ad..8b9f66a29c 100644
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -34,8 +34,6 @@
* CLKs configurations
*/
-#define CONFIG_SYS_HZ 1000
-
/*
* Board-specific values for Orion5x MPP low level init:
* - MPPs 12 to 15 are SATA LEDs (mode 5)
diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h
index 49fdf4c78b..03b74a2dab 100644
--- a/include/configs/enbw_cmc.h
+++ b/include/configs/enbw_cmc.h
@@ -33,7 +33,6 @@
#define CONFIG_SYS_OSCIN_FREQ 24000000
#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ 1000
#define CONFIG_DA850_LOWLEVEL
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_SYS_DA850_PLL_INIT
diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h
index 841338c422..f1af96ddbb 100644
--- a/include/configs/ep8248.h
+++ b/include/configs/ep8248.h
@@ -153,8 +153,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_SYS_FLASH_BASE 0xFF800000
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index d0f9ab86d5..56b4ecf272 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -358,8 +358,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h
index a3b3349598..18e4dafc5c 100644
--- a/include/configs/ep82xxm.h
+++ b/include/configs/ep82xxm.h
@@ -165,8 +165,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/*-----------------------------------------------------------------------
diff --git a/include/configs/espt.h b/include/configs/espt.h
index 5933983963..1bd7eeceb9 100644
--- a/include/configs/espt.h
+++ b/include/configs/espt.h
@@ -100,7 +100,6 @@
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_TMU_CLK_DIV 4
-#define CONFIG_SYS_HZ 1000
/* Ether */
#define CONFIG_SH_ETHER 1
diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index adf14be365..5d33c766e7 100644
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -31,7 +31,6 @@
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */
-#define CONFIG_SYS_HZ 1000
/* 32kB internal SRAM */
#define CONFIG_SRAM_BASE 0x00300000 /*AT91SAM9XE_SRAM_BASE */
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index 8c07d8f752..bdefee108d 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -180,8 +180,6 @@
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-#define CONFIG_SYS_HZ 1000
-
#define CONFIG_RD_LVL
#define CONFIG_NR_DRAM_BANKS 8
diff --git a/include/configs/favr-32-ezkit.h b/include/configs/favr-32-ezkit.h
index 14f0784817..fc015e6939 100644
--- a/include/configs/favr-32-ezkit.h
+++ b/include/configs/favr-32-ezkit.h
@@ -18,12 +18,6 @@
#define CONFIG_FAVR32_EZKIT_EXT_FLASH
/*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ 1000
-
-/*
* Set up the PLL to run at 140 MHz, the CPU to run at the PLL
* frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
* PLL frequency.
diff --git a/include/configs/flea3.h b/include/configs/flea3.h
index 1781089ec7..84175676c2 100644
--- a/include/configs/flea3.h
+++ b/include/configs/flea3.h
@@ -129,8 +129,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
-
/*
* Physical Memory Map
*/
diff --git a/include/configs/galaxy5200.h b/include/configs/galaxy5200.h
index 011a3b315c..560363d237 100644
--- a/include/configs/galaxy5200.h
+++ b/include/configs/galaxy5200.h
@@ -352,7 +352,6 @@
#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_DISPLAY_BOARDINFO 1
diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h
index da08f217bb..2437b4b613 100644
--- a/include/configs/gr_cpci_ax2000.h
+++ b/include/configs/gr_cpci_ax2000.h
@@ -303,8 +303,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
/*
* Various low-level settings
*/
diff --git a/include/configs/gr_ep2s60.h b/include/configs/gr_ep2s60.h
index 10f24141bd..2cd6eaedcc 100644
--- a/include/configs/gr_ep2s60.h
+++ b/include/configs/gr_ep2s60.h
@@ -292,8 +292,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
/*-----------------------------------------------------------------------
* USB stuff
*-----------------------------------------------------------------------
diff --git a/include/configs/gr_xc3s_1500.h b/include/configs/gr_xc3s_1500.h
index e01becbb3d..39036cdf7e 100644
--- a/include/configs/gr_xc3s_1500.h
+++ b/include/configs/gr_xc3s_1500.h
@@ -251,8 +251,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
/*
* Various low-level settings
*/
diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h
index c288b39f2d..938ee86281 100644
--- a/include/configs/grasshopper.h
+++ b/include/configs/grasshopper.h
@@ -16,12 +16,6 @@
#define CONFIG_AT32AP7000
/*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ 1000
-
-/*
* Set up the PLL to run at 140 MHz, the CPU to run at the PLL
* frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
* PLL frequency.
diff --git a/include/configs/grsim.h b/include/configs/grsim.h
index 9409d830da..2d977ceeb6 100644
--- a/include/configs/grsim.h
+++ b/include/configs/grsim.h
@@ -278,8 +278,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
/***** Gaisler GRLIB IP-Cores Config ********/
/* AMBA Plug & Play info display on startup */
diff --git a/include/configs/grsim_leon2.h b/include/configs/grsim_leon2.h
index 77919eec95..36ebaf7ff7 100644
--- a/include/configs/grsim_leon2.h
+++ b/include/configs/grsim_leon2.h
@@ -276,8 +276,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
/***** Gaisler GRLIB IP-Cores Config ********/
#define CONFIG_SYS_GRLIB_SDRAM 0
diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h
index 8603799758..3416fe3cec 100644
--- a/include/configs/gw8260.h
+++ b/include/configs/gw8260.h
@@ -351,7 +351,6 @@
#define CONFIG_CLOCKS_IN_MHZ
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
/* memtest works from the end of the exception vector table
diff --git a/include/configs/h2200.h b/include/configs/h2200.h
index 19ecc9ad6c..d02648420f 100644
--- a/include/configs/h2200.h
+++ b/include/configs/h2200.h
@@ -17,8 +17,6 @@
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_HZ 1000
-
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
diff --git a/include/configs/hammerhead.h b/include/configs/hammerhead.h
index 38c70aca32..3f2fadbb58 100644
--- a/include/configs/hammerhead.h
+++ b/include/configs/hammerhead.h
@@ -13,8 +13,6 @@
#define CONFIG_AT32AP7000
#define CONFIG_HAMMERHEAD
-#define CONFIG_SYS_HZ 1000
-
/*
* Set up the PLL to run at 125 MHz, the CPU to run at the PLL
* frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h
index b8197ac189..73e1624375 100644
--- a/include/configs/hawkboard.h
+++ b/include/configs/hawkboard.h
@@ -28,7 +28,6 @@
#define CONFIG_SYS_OSCIN_FREQ 24000000
#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_AIS_CONFIG_FILE "board/$(BOARDDIR)/hawkboard-ais-nand.cfg"
diff --git a/include/configs/hermes.h b/include/configs/hermes.h
index de539f2a24..736ffb613d 100644
--- a/include/configs/hermes.h
+++ b/include/configs/hermes.h
@@ -86,8 +86,6 @@
#define CONFIG_SYS_PIO_MODE 0 /* IDE interface in PIO Mode 0 */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_SYS_ALLOC_DPRAM 1 /* use allocation routines */
/*
* Low Level Configuration Settings
diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index afb6e64e1b..016305a472 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -12,8 +12,6 @@
#define CONFIG_SYS_THUMB_BUILD
#define CONFIG_SYS_NO_FLASH
-#define CFG_HZ 1000
-#define CONFIG_SYS_HZ CFG_HZ
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index dad7540d50..1c74a2e96e 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -236,8 +236,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
/*
* Enable loopw command.
*/
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index 9f4d8abce8..cc250649ea 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -270,8 +270,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_SYS_I2C_SPEED 50000
diff --git a/include/configs/igep0033.h b/include/configs/igep0033.h
index 3e18a657fa..2c69d4e30c 100644
--- a/include/configs/igep0033.h
+++ b/include/configs/igep0033.h
@@ -144,7 +144,6 @@
/* Platform/Board specific defs */
#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000 /* 1ms clock */
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550
diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h
index e92bb68484..ac36ac6950 100644
--- a/include/configs/igep00x0.h
+++ b/include/configs/igep00x0.h
@@ -238,7 +238,6 @@
*/
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
/*
* Physical Memory Map
diff --git a/include/configs/ima3-mx53.h b/include/configs/ima3-mx53.h
index ae6828bd78..ad1614abbb 100644
--- a/include/configs/ima3-mx53.h
+++ b/include/configs/ima3-mx53.h
@@ -111,7 +111,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
/* Physical Memory Map */
diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h
index 01a4732d52..9c25efe851 100644
--- a/include/configs/imx27lite-common.h
+++ b/include/configs/imx27lite-common.h
@@ -16,7 +16,6 @@
#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_MX27
#define CONFIG_MX27_CLK32 32768 /* OSC32K frequency */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_DISPLAY_CPUINFO
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index 0d0715869d..8428d84496 100644
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -117,8 +117,6 @@
#define CONFIG_SYS_LOAD_ADDR 0 /* default load address */
-#define CONFIG_SYS_HZ 1000
-
#define CONFIG_CMDLINE_EDITING 1
/*-----------------------------------------------------------------------
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index 6b99d1bd3f..7b5569579e 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -120,8 +120,6 @@
#define CONFIG_SYS_LOAD_ADDR 0 /* default load address */
-#define CONFIG_SYS_HZ 1000
-
#define CONFIG_CMDLINE_EDITING
/*
diff --git a/include/configs/incaip.h b/include/configs/incaip.h
index 0ff9a7ff82..7d2715d094 100644
--- a/include/configs/incaip.h
+++ b/include/configs/incaip.h
@@ -106,8 +106,6 @@
#define CONFIG_SYS_MIPS_TIMER_FREQ (incaip_get_cpuclk() / 2)
-#define CONFIG_SYS_HZ 1000
-
#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_SYS_LOAD_ADDR 0x80100000 /* default load address */
diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index 11ab6a4d26..608d7592f1 100644
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -347,8 +347,6 @@ static inline void tws_data_config_output(unsigned output)
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
/*
* Enable loopw command.
*/
diff --git a/include/configs/integrator-common.h b/include/configs/integrator-common.h
index 94cdfd29da..267a92b2d0 100644
--- a/include/configs/integrator-common.h
+++ b/include/configs/integrator-common.h
@@ -12,7 +12,6 @@
#define CONFIG_SYS_TEXT_BASE 0x01000000
#define CONFIG_SYS_MEMTEST_START 0x100000
#define CONFIG_SYS_MEMTEST_END 0x10000000
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_TIMERBASE 0x13000100 /* Timer1 */
#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */
#define CONFIG_SYS_LONGHELP
diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h
index 82d4298007..3b5a1cd2f6 100644
--- a/include/configs/ipam390.h
+++ b/include/configs/ipam390.h
@@ -33,7 +33,6 @@
#define CONFIG_SYS_OSCIN_FREQ 24000000
#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_DA850_PLL_INIT
#define CONFIG_SYS_DA850_DDR_INIT
#define CONFIG_SYS_TEXT_BASE 0xc1080000
diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h
index b88c51b656..408168b9bc 100644
--- a/include/configs/ipek01.h
+++ b/include/configs/ipek01.h
@@ -296,7 +296,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_LOOPW
/*
diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h
index d0609f6250..b34e3422da 100644
--- a/include/configs/jadecpu.h
+++ b/include/configs/jadecpu.h
@@ -12,7 +12,6 @@
#define CONFIG_MB86R0x
#define CONFIG_MB86R0x_IOCLK get_bus_freq(0)
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_TEXT_BASE 0x10000000
#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
diff --git a/include/configs/jornada.h b/include/configs/jornada.h
index 71f1e72528..7e18d8e7b5 100644
--- a/include/configs/jornada.h
+++ b/include/configs/jornada.h
@@ -70,7 +70,6 @@
#define CONFIG_SYS_BARGSIZE 256 /* Boot Argument Buffer Size */
#define CONFIG_SYS_MEMTEST_START 0xc0040000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xc2000000 /* 4..128 MB */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CPUSPEED 0x0a /* core clock 206MHz */
#define CONFIG_SYS_BAUDRATE_TABLE { 19200, 38400, 57600, 115200 }
diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h
index a0b0efd369..71e8ececfc 100644
--- a/include/configs/jupiter.h
+++ b/include/configs/jupiter.h
@@ -261,8 +261,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#if defined(CONFIG_CMD_KGDB)
# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h
index e71f37f2f6..2a15ad469b 100644
--- a/include/configs/km/keymile-common.h
+++ b/include/configs/km/keymile-common.h
@@ -54,8 +54,6 @@
#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */
-#define CONFIG_SYS_HZ 1000 /* decr. freq: 1 ms ticks */
-
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
diff --git a/include/configs/korat.h b/include/configs/korat.h
index 7a2b24bcdb..b09af199c8 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -323,8 +323,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h
index 80d40c9a8a..251327a227 100644
--- a/include/configs/kvme080.h
+++ b/include/configs/kvme080.h
@@ -95,7 +95,6 @@
#define CONFIG_SYS_MEMTEST_END 0x07C00000
#define CONFIG_SYS_LOAD_ADDR 0x00100000
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h
index 6323050fe0..1afd487932 100644
--- a/include/configs/kzm9g.h
+++ b/include/configs/kzm9g.h
@@ -127,8 +127,6 @@
#define CONFIG_SYS_CPU_CLK (1196000000)
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */
-#define CFG_HZ (1000)
-#define CONFIG_SYS_HZ CFG_HZ
/* Ether */
#define CONFIG_NET_MULTI
diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h
index 405edee80d..fcd809dfbf 100644
--- a/include/configs/linkstation.h
+++ b/include/configs/linkstation.h
@@ -305,7 +305,6 @@
/* FIXME: 32.768 MHz is the crystal frequency but */
/* the real frequency is lower by about 0.75% */
#define CONFIG_SYS_CLK_FREQ 32768000
-#define CONFIG_SYS_HZ 1000
/* Bit-field values for MCCR1. */
#define CONFIG_SYS_ROMNAL 0
diff --git a/include/configs/lp8x4x.h b/include/configs/lp8x4x.h
index 26b989a03a..68e1a974dd 100644
--- a/include/configs/lp8x4x.h
+++ b/include/configs/lp8x4x.h
@@ -116,11 +116,6 @@
#define CONFIG_AUTO_COMPLETE 1
/*
- * Clock Configuration
- */
-#define CONFIG_SYS_HZ 1000 /* Timer @ 3250000 Hz */
-
-/*
* DRAM Map
*/
#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index be37215030..b87df5479d 100644
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -110,7 +110,6 @@
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DRAM_BASE + 0x8000) /* default load address */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */
#ifdef CONFIG_MMC
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index 551b73c213..f204587336 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -212,8 +212,6 @@
#define CONFIG_SYS_PIO_MODE 0 /* IDE interface in PIO Mode 0 */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
/*
* When the watchdog is enabled, output must be fast enough in Linux.
*/
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index fb19c4120f..c348329cb1 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -481,8 +481,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h
index f1c93d8da9..8c54549fc2 100644
--- a/include/configs/m53evk.h
+++ b/include/configs/m53evk.h
@@ -10,7 +10,6 @@
#define CONFIG_MX53
#define CONFIG_MXC_GPIO
-#define CONFIG_SYS_HZ 1000
#include <asm/arch/imx-regs.h>
diff --git a/include/configs/manroland/mpc5200-common.h b/include/configs/manroland/mpc5200-common.h
index 98bfcc5506..21b17f6e2c 100644
--- a/include/configs/manroland/mpc5200-common.h
+++ b/include/configs/manroland/mpc5200-common.h
@@ -143,8 +143,6 @@
/*use Hardware WDT */
#define CONFIG_HW_WATCHDOG
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#if defined(CONFIG_CMD_KGDB)
# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value*/
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index 8eeb597acf..1b9e2d0f90 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -302,8 +302,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#if defined(CONFIG_CMD_KGDB)
# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index 5e27ab2e4c..4619dfb3e4 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -303,7 +303,6 @@
*/
#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
/*
* Physical Memory Map
diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index 910c93fb10..6501ea40e1 100644
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -342,8 +342,6 @@
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ 1000
-
/*
* For booting Linux, the board info and command line data
* have to be in the first 256 MB of memory, since this is
diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index a9ea539766..047e171100 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -249,8 +249,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index 4d7a91f453..f188102edb 100644
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -40,7 +40,6 @@
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* 32.768 kHz crystal */
#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq */
/* Misc CPU related */
#define CONFIG_SKIP_LOWLEVEL_INIT
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 0e3de777b2..aa8d59d6e9 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -399,7 +399,6 @@
/* architecture dependent code */
#define CONFIG_SYS_USR_EXCEP /* user exception */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo"
diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h
index 82f653ed5c..3d792398c5 100644
--- a/include/configs/mimc200.h
+++ b/include/configs/mimc200.h
@@ -17,8 +17,6 @@
#define CONFIG_MIMC200_EXT_FLASH
-#define CONFIG_SYS_HZ 1000
-
/*
* Set up the PLL to run at 140 MHz, the CPU to run at the PLL
* frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index 6db6c9ebc9..8071ac3808 100644
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -379,8 +379,6 @@ extern void __led_set(led_id_t id, int state);
#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default kernel load addr */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
/*
* Various low-level settings
*/
diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index 1721af182f..4a8adf6f33 100644
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -497,7 +497,6 @@
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
/*
* For booting Linux, the board info and command line data
diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
index c8021601fa..0308c52bc7 100644
--- a/include/configs/mpc7448hpc2.h
+++ b/include/configs/mpc7448hpc2.h
@@ -186,8 +186,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x00400000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h
index a3a6566a78..de7a53a8c2 100644
--- a/include/configs/mpc8308_p1m.h
+++ b/include/configs/mpc8308_p1m.h
@@ -420,7 +420,6 @@
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
/*
* For booting Linux, the board info and command line data
diff --git a/include/configs/mpq101.h b/include/configs/mpq101.h
index 55d93da598..6d0d392b77 100644
--- a/include/configs/mpq101.h
+++ b/include/configs/mpq101.h
@@ -334,7 +334,6 @@
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
/*
* For booting Linux, the board info and command line data
diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h
index 505e22505b..fcf237edb9 100644
--- a/include/configs/mpr2.h
+++ b/include/configs/mpr2.h
@@ -69,7 +69,6 @@
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_TMU_CLK_DIV 4 /* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ 1000
/* UART */
#define CONFIG_SCIF_CONSOLE 1
diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h
index 3e74dffc4d..ec8523eb95 100644
--- a/include/configs/ms7720se.h
+++ b/include/configs/ms7720se.h
@@ -87,7 +87,6 @@
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_TMU_CLK_DIV 4 /* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ 1000
/* PCMCIA */
#define CONFIG_IDE_PCMCIA 1
diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h
index e1f2be8945..54fb7c3e86 100644
--- a/include/configs/ms7722se.h
+++ b/include/configs/ms7722se.h
@@ -113,6 +113,5 @@
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ 1000
#endif /* __MS7722SE_H */
diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h
index ba65a7c0b5..eea3bd1f2c 100644
--- a/include/configs/ms7750se.h
+++ b/include/configs/ms7750se.h
@@ -84,6 +84,5 @@
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_TMU_CLK_DIV 4
-#define CONFIG_SYS_HZ 1000
#endif /* __MS7750SE_H */
diff --git a/include/configs/muas3001.h b/include/configs/muas3001.h
index c7ec49e3d7..87c06389b4 100644
--- a/include/configs/muas3001.h
+++ b/include/configs/muas3001.h
@@ -195,8 +195,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_SYS_SDRAM_BASE 0x00000000
diff --git a/include/configs/munices.h b/include/configs/munices.h
index bcc997ab01..3bda8ebea4 100644
--- a/include/configs/munices.h
+++ b/include/configs/munices.h
@@ -175,7 +175,6 @@
#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_DISPLAY_BOARDINFO 1
#define CONFIG_CMDLINE_EDITING 1
diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h
index c458dd9734..721b75daee 100644
--- a/include/configs/mv-common.h
+++ b/include/configs/mv-common.h
@@ -35,7 +35,6 @@
/*
* CLKs configurations
*/
-#define CONFIG_SYS_HZ 1000
/*
* NS16550 Configuration
diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
index 70d1dee6aa..c15d54631a 100644
--- a/include/configs/mx1ads.h
+++ b/include/configs/mx1ads.h
@@ -114,7 +114,6 @@
#define CONFIG_SYS_MEMTEST_END 0x0AF00000 /* 63 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR 0x08800000 /* default load address */
-/*#define CONFIG_SYS_HZ 1000 */
#define CONFIG_SYS_HZ 3686400
#define CONFIG_SYS_CPUSPEED 0x141
diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
index 256b3c1bef..e48798c70a 100644
--- a/include/configs/mx25pdk.h
+++ b/include/configs/mx25pdk.h
@@ -12,7 +12,6 @@
/* High Level Configuration Options */
#define CONFIG_MX25
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_TEXT_BASE 0x81200000
#define CONFIG_MXC_GPIO
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index 99909536fe..51b1a141eb 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -134,8 +134,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
-
#define CONFIG_CMDLINE_EDITING 1
/*-----------------------------------------------------------------------
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index d41f2cd411..8a11461123 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -137,8 +137,6 @@
/* default load address */
#define CONFIG_SYS_LOAD_ADDR 0x81000000
-#define CONFIG_SYS_HZ 1000
-
#define CONFIG_CMDLINE_EDITING
/*-----------------------------------------------------------------------
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index 2d1b800c3a..0fb83204e3 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -153,8 +153,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
-
/*
* Physical Memory Map
*/
diff --git a/include/configs/mx51_efikamx.h b/include/configs/mx51_efikamx.h
index 0772dd23c8..8a44ef5a74 100644
--- a/include/configs/mx51_efikamx.h
+++ b/include/configs/mx51_efikamx.h
@@ -227,7 +227,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
/*-----------------------------------------------------------------------
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 04f518a22a..10c7ee9d8d 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -232,7 +232,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
/*-----------------------------------------------------------------------
diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index b404247efa..60c40c865b 100644
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -199,7 +199,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
/* Physical Memory Map */
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index d9c7df5b2c..623bf970e8 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -149,7 +149,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
/* Physical Memory Map */
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 5f343b13bd..ab55fbea2c 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -191,7 +191,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
/* Physical Memory Map */
diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
index 2f7736d503..818d7e7f8b 100644
--- a/include/configs/mx53smd.h
+++ b/include/configs/mx53smd.h
@@ -134,7 +134,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
/* Physical Memory Map */
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
index ef3058c18f..2f91a6c1d6 100644
--- a/include/configs/mx6qarm2.h
+++ b/include/configs/mx6qarm2.h
@@ -127,7 +127,6 @@
#define CONFIG_SYS_MEMTEST_END 0x10010000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index bf6113b2aa..f97a37cb1f 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -185,7 +185,6 @@
#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
#define CONFIG_STACKSIZE (128 * 1024)
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index a58cc36fc7..7abad08c47 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -162,7 +162,6 @@
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_512M)
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
#define CONFIG_STACKSIZE SZ_128K
diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index 9cf69ff65e..363b277635 100644
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -41,9 +41,6 @@
* CPU specifics
*/
-/* Ticks per second */
-#define CONFIG_SYS_HZ 1000
-
/* MXS uses FDT */
#define CONFIG_OF_LIBFDT
diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h
index 181a6bfd41..4d3428cb81 100644
--- a/include/configs/nhk8815.h
+++ b/include/configs/nhk8815.h
@@ -76,7 +76,6 @@
#define CONFIG_BOARD_LATE_INIT /* call board_late_init during start up */
/* timing informazion */
-#define CONFIG_SYS_HZ 1000 /* Mandatory... */
#define CONFIG_SYS_TIMERBASE 0x101E2000
/* serial port (PL011) configuration */
diff --git a/include/configs/nios2-generic.h b/include/configs/nios2-generic.h
index 3e18357ee7..1578b010b9 100644
--- a/include/configs/nios2-generic.h
+++ b/include/configs/nios2-generic.h
@@ -39,7 +39,6 @@
#define CONFIG_SYS_LOW_RES_TIMER
#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_TIMER_BASE
#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_TIMER_IRQ
-#define CONFIG_SYS_HZ 1000 /* Always 1000 */
#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period (msec)*/
#define CONFIG_SYS_NIOS_TMRCNT \
(CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_TIMER_FREQ / 1000) - 1)
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index 85fe5ee94e..3df8de0138 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -306,7 +306,6 @@
#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h
index 64db0eb944..4332779d25 100644
--- a/include/configs/nokia_rx51.h
+++ b/include/configs/nokia_rx51.h
@@ -426,7 +426,6 @@ int rx51_kp_getc(void);
*/
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
/*
* Stack sizes
diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h
index 1709dc2c26..ce08454994 100644
--- a/include/configs/o2dnt-common.h
+++ b/include/configs/o2dnt-common.h
@@ -331,7 +331,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000
/* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_HZ 1000
/*
* Various low-level settings
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 9fcd50b523..47d9902088 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -341,7 +341,6 @@
*/
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
/*-----------------------------------------------------------------------
* Physical Memory Map
diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h
index edf6543443..3eae28884c 100644
--- a/include/configs/omap3_evm_common.h
+++ b/include/configs/omap3_evm_common.h
@@ -35,7 +35,6 @@
*/
#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
/* Size of environment - 128KB */
#define CONFIG_ENV_SIZE (128 << 10)
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 42cea012da..0c096f429f 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -265,7 +265,6 @@
*/
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
/*
* Physical Memory Map
diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h
index 73d5d30f01..45da2e00b2 100644
--- a/include/configs/omap3_mvblx.h
+++ b/include/configs/omap3_mvblx.h
@@ -236,7 +236,6 @@
*/
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
/*-----------------------------------------------------------------------
* Physical Memory Map
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 88380a42c6..46416946c7 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -217,7 +217,6 @@
*/
#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
/*-----------------------------------------------------------------------
* Physical Memory Map
diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
index ee448bb812..3cce0de48d 100644
--- a/include/configs/omap3_pandora.h
+++ b/include/configs/omap3_pandora.h
@@ -201,7 +201,6 @@
*/
#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
/*-----------------------------------------------------------------------
* Physical Memory Map
diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h
index fc219fa478..697a3f386c 100644
--- a/include/configs/omap3_sdp3430.h
+++ b/include/configs/omap3_sdp3430.h
@@ -273,7 +273,6 @@
*/
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index a4a739e4a0..8591f98a8a 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -228,7 +228,6 @@
*/
#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
/*-----------------------------------------------------------------------
* Physical Memory Map
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index e9f2383f7c..15f1f4d55b 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -220,7 +220,6 @@
/* Use General purpose timer 1 */
#define CONFIG_SYS_TIMERBASE GPT2_BASE
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
/*
* SDRAM Memory Map
diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h
index c2b9e13c72..c48790d2ae 100644
--- a/include/configs/omap5912osk.h
+++ b/include/configs/omap5912osk.h
@@ -118,7 +118,6 @@
*/
#define CONFIG_SYS_TIMERBASE 0xFFFEC500 /* use timer 1 */
#define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */
-#define CONFIG_SYS_HZ 1000
/*-----------------------------------------------------------------------
* Physical Memory Map
diff --git a/include/configs/openrisc-generic.h b/include/configs/openrisc-generic.h
index 9787623505..d4de3c3550 100644
--- a/include/configs/openrisc-generic.h
+++ b/include/configs/openrisc-generic.h
@@ -55,7 +55,6 @@
/*
* TIMER
*/
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_OPENRISC_TMR_HZ 100
/*
diff --git a/include/configs/origen.h b/include/configs/origen.h
index da135740e4..bad34b3e71 100644
--- a/include/configs/origen.h
+++ b/include/configs/origen.h
@@ -102,8 +102,6 @@
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-#define CONFIG_SYS_HZ 1000
-
/* ORIGEN has 4 bank of DRAM */
#define CONFIG_NR_DRAM_BANKS 4
#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
diff --git a/include/configs/otc570.h b/include/configs/otc570.h
index 32b36e41ac..ae4054bd8a 100644
--- a/include/configs/otc570.h
+++ b/include/configs/otc570.h
@@ -39,7 +39,6 @@
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* 32.768 kHz crystal */
#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq */
/* Misc CPU related */
#define CONFIG_SKIP_LOWLEVEL_INIT
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 62ecc4d754..91a678212d 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -917,7 +917,6 @@
/* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */
/*
* For booting Linux, the board info and command line data
diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h
index 3d64a1f9b0..76189e136f 100644
--- a/include/configs/p1_twr.h
+++ b/include/configs/p1_twr.h
@@ -481,7 +481,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
/* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */
/*
* For booting Linux, the board info and command line data
diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h
index 2045f1da95..a210e293a9 100644
--- a/include/configs/p3mx.h
+++ b/include/configs/p3mx.h
@@ -283,8 +283,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x08000000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h
index 0d0d243ece..3fde7ca3a3 100644
--- a/include/configs/p3p440.h
+++ b/include/configs/p3p440.h
@@ -212,8 +212,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
diff --git a/include/configs/palmtreo680.h b/include/configs/palmtreo680.h
index 7f96a96363..adf85190d1 100644
--- a/include/configs/palmtreo680.h
+++ b/include/configs/palmtreo680.h
@@ -119,7 +119,6 @@
* Clock Configuration
*/
#undef CONFIG_SYS_CLKS_IN_HZ
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_SYS_CPUSPEED 0x210 /* 416MHz ; N=2,L=16 */
/*
diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h
index cab9192de3..e929b23f28 100644
--- a/include/configs/pb1x00.h
+++ b/include/configs/pb1x00.h
@@ -66,8 +66,6 @@
#define CONFIG_SYS_MIPS_TIMER_FREQ 396000000
-#define CONFIG_SYS_HZ 1000
-
#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */
diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h
index 423e2fa6db..5c6188955d 100644
--- a/include/configs/pcm030.h
+++ b/include/configs/pcm030.h
@@ -364,7 +364,6 @@ RTC configuration
#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_DISPLAY_BOARDINFO 1
diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h
index 2fff0beffa..4970b13e96 100644
--- a/include/configs/pcm051.h
+++ b/include/configs/pcm051.h
@@ -155,7 +155,6 @@
/* Platform/Board specific defs */
#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000 /* 1ms clock */
#define CONFIG_CONS_INDEX 1
/* NS16550 Configuration */
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 2c926dc06b..400cb3e826 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -292,8 +292,6 @@
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CONFIG_LYNXKDI 1 /* support kdi files */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h
index d9853d5118..266d107e44 100644
--- a/include/configs/pdm360ng.h
+++ b/include/configs/pdm360ng.h
@@ -416,7 +416,6 @@
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/* Decrementer freq: 1ms ticks */
-#define CONFIG_SYS_HZ 1000
/*
* For booting Linux, the board info and command line data
diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h
index baed5920b6..98b2e0d789 100644
--- a/include/configs/pdnb3.h
+++ b/include/configs/pdnb3.h
@@ -99,7 +99,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x00010000 /* default load address */
#define CONFIG_IXP425_TIMER_CLK 66666666
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
/***************************************************************
* Platform/Board specific defines start here.
diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index 6e0e8a6557..327be3fde9 100644
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -253,8 +253,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index 67b40b2fcc..37c43f4d33 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -28,8 +28,6 @@
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000
-#define CONFIG_SYS_HZ 1000
-
#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9261"
#define CONFIG_PM9261 1 /* on a Ronetix PM9261 Board */
#define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 2b4335e78e..eccc027fe2 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -28,8 +28,6 @@
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
-#define CONFIG_SYS_HZ 1000
-
#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9263"
#define CONFIG_PM9263 1 /* on a Ronetix PM9263 Board */
#define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index 7d16bd8b25..51fe0be935 100644
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -31,7 +31,6 @@
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_TEXT_BASE 0x73f00000
#define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h
index 68575481a3..18f9a6cc20 100644
--- a/include/configs/ppmc7xx.h
+++ b/include/configs/ppmc7xx.h
@@ -362,7 +362,6 @@
*/
#define CONFIG_SYS_BUS_CLK CONFIG_BUS_CLK
-#define CONFIG_SYS_HZ 1000
/*
diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h
index 91cb05e0a8..760dcaca4b 100644
--- a/include/configs/ppmc8260.h
+++ b/include/configs/ppmc8260.h
@@ -314,7 +314,6 @@
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_SYS_LOAD_ADDR 0x140000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_SYS_MEMTEST_START 0x2000 /* memtest works from the end of */
/* the exception vector table */
diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h
index a23d84b6e2..84ad006acd 100644
--- a/include/configs/pxa255_idp.h
+++ b/include/configs/pxa255_idp.h
@@ -223,7 +223,6 @@
#define CONFIG_SYS_LOAD_ADDR 0xa0800000 /* default load address */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */
#define RTC 1 /* enable 32KHz osc */
diff --git a/include/configs/qemu-malta.h b/include/configs/qemu-malta.h
index 4e7ad33230..03514d165b 100644
--- a/include/configs/qemu-malta.h
+++ b/include/configs/qemu-malta.h
@@ -25,7 +25,6 @@
*/
#define CONFIG_SYS_MHZ 250 /* arbitrary value */
#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_DCACHE_SIZE 16384 /* arbitrary value */
#define CONFIG_SYS_ICACHE_SIZE 16384 /* arbitrary value */
diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h
index c3a69c5327..dd3babb505 100644
--- a/include/configs/qemu-mips.h
+++ b/include/configs/qemu-mips.h
@@ -106,8 +106,6 @@
#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
-#define CONFIG_SYS_HZ 1000
-
/* Cached addr */
#define CONFIG_SYS_SDRAM_BASE 0x80000000
diff --git a/include/configs/qemu-mips64.h b/include/configs/qemu-mips64.h
index 7267a8115e..a1422fca11 100644
--- a/include/configs/qemu-mips64.h
+++ b/include/configs/qemu-mips64.h
@@ -108,8 +108,6 @@
#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
-#define CONFIG_SYS_HZ 1000
-
/* Cached addr */
#define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000
diff --git a/include/configs/qong.h b/include/configs/qong.h
index 6f0f760764..f9d6642cc4 100644
--- a/include/configs/qong.h
+++ b/include/configs/qong.h
@@ -188,8 +188,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
-
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h
index 76637d0150..7b04e0c3e3 100644
--- a/include/configs/quad100hd.h
+++ b/include/configs/quad100hd.h
@@ -121,8 +121,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_info (bd_t) */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
diff --git a/include/configs/quantum.h b/include/configs/quantum.h
index 1be59b8431..f3540c1421 100644
--- a/include/configs/quantum.h
+++ b/include/configs/quantum.h
@@ -123,8 +123,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/r0p7734.h b/include/configs/r0p7734.h
index 40afed7457..dd26a71bcb 100644
--- a/include/configs/r0p7734.h
+++ b/include/configs/r0p7734.h
@@ -166,6 +166,5 @@
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_TMU_CLK_DIV 4
-#define CONFIG_SYS_HZ 1000
#endif /* __R0P7734_H */
diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h
index 5b8cc88bd7..ddcc975874 100644
--- a/include/configs/r2dplus.h
+++ b/include/configs/r2dplus.h
@@ -79,7 +79,6 @@
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_TMU_CLK_DIV 4
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_PLL_SETTLING_TIME 100/* in us */
/*
diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
index 52591da74c..f5e4daab8f 100644
--- a/include/configs/r7780mp.h
+++ b/include/configs/r7780mp.h
@@ -104,7 +104,6 @@
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_TMU_CLK_DIV 4
-#define CONFIG_SYS_HZ 1000
/* PCI Controller */
#if defined(CONFIG_CMD_PCI)
diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h
index 216c6cb70b..0b7add7bea 100644
--- a/include/configs/rpi_b.h
+++ b/include/configs/rpi_b.h
@@ -30,9 +30,6 @@
*/
#define CONFIG_MACH_TYPE MACH_TYPE_BCM2708
-/* Timer */
-#define CONFIG_SYS_HZ 1000
-
/* Memory layout */
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_SDRAM_BASE 0x00000000
diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h
index 0842568a3d..f144f84320 100644
--- a/include/configs/rsdproto.h
+++ b/include/configs/rsdproto.h
@@ -142,8 +142,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index c303244f98..0590d201ce 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -173,8 +173,6 @@
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4000000)
-#define CONFIG_SYS_HZ 1000
-
/* Goni has 3 banks of DRAM, but swap the bank */
#define CONFIG_NR_DRAM_BANKS 3
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* OneDRAM Bank #0 */
diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
index 97a4008e36..d9e4c5683f 100644
--- a/include/configs/s5pc210_universal.h
+++ b/include/configs/s5pc210_universal.h
@@ -198,8 +198,6 @@
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000)
-#define CONFIG_SYS_HZ 1000
-
/* Universal has 2 banks of DRAM */
#define CONFIG_NR_DRAM_BANKS 2
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* LDDDR2 DMC 0 */
diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
index 9d90553fc2..3750ad2c3d 100644
--- a/include/configs/sacsng.h
+++ b/include/configs/sacsng.h
@@ -583,7 +583,6 @@
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_SYS_ALT_MEMTEST /* Select full-featured memory test */
#define CONFIG_SYS_MEMTEST_START 0x2000 /* memtest works from the end of */
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index 79c00684dd..c38cf22289 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -20,7 +20,6 @@
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_AT91FAMILY
#define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index 042ee7b8ef..279abbcae5 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -65,8 +65,6 @@
#define CONFIG_ENV_SIZE 8192
#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_SYS_HZ 1000
-
/* Memory things - we don't really want a memory test */
#define CONFIG_SYS_LOAD_ADDR 0x00000000
#define CONFIG_SYS_MEMTEST_START 0x00100000
diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h
index 4ba224252a..1b07da4291 100644
--- a/include/configs/sbc35_a9g20.h
+++ b/include/configs/sbc35_a9g20.h
@@ -26,7 +26,6 @@
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12.000 MHz crystal */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h
index 7eb3d0ccff..2fd1dc48e4 100644
--- a/include/configs/sbc405.h
+++ b/include/configs/sbc405.h
@@ -145,8 +145,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_info (bd_t) */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
#define CONFIG_SYS_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index d0cb5882d3..a258fe83dd 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -450,7 +450,6 @@
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
/*
* For booting Linux, the board info and command line data
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index e5f870f419..6d970608f2 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -565,7 +565,6 @@
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
/*
* For booting Linux, the board info and command line data
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index c41471c860..dba948a5ce 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -506,7 +506,6 @@
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
/*
* For booting Linux, the board info and command line data
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index 60710ba829..9a11150592 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -224,8 +224,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
/*-----------------------------------------------------------------------
* IIC stuff
*-----------------------------------------------------------------------
diff --git a/include/configs/sh7752evb.h b/include/configs/sh7752evb.h
index 8d6ee8a6d7..ebdc5c8b05 100644
--- a/include/configs/sh7752evb.h
+++ b/include/configs/sh7752evb.h
@@ -134,5 +134,4 @@
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_TMU_CLK_DIV 4
-#define CONFIG_SYS_HZ 1000
#endif /* __SH7752EVB_H */
diff --git a/include/configs/sh7757lcr.h b/include/configs/sh7757lcr.h
index 530b226354..ce1add2689 100644
--- a/include/configs/sh7757lcr.h
+++ b/include/configs/sh7757lcr.h
@@ -142,5 +142,4 @@
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_TMU_CLK_DIV 4
-#define CONFIG_SYS_HZ 1000
#endif /* __SH7757LCR_H */
diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h
index 92416b17a5..a13778830a 100644
--- a/include/configs/sh7763rdp.h
+++ b/include/configs/sh7763rdp.h
@@ -100,7 +100,6 @@
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ 1000
/* Ether */
#define CONFIG_SH_ETHER 1
diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h
index 594e6d2188..4acbcab1b2 100644
--- a/include/configs/sh7785lcr.h
+++ b/include/configs/sh7785lcr.h
@@ -174,6 +174,5 @@
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_TMU_CLK_DIV 4
-#define CONFIG_SYS_HZ 1000
#endif /* __SH7785LCR_H */
diff --git a/include/configs/shmin.h b/include/configs/shmin.h
index 16c6dc8b82..5c990fc96d 100644
--- a/include/configs/shmin.h
+++ b/include/configs/shmin.h
@@ -105,7 +105,6 @@
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_TMU_CLK_DIV 4
-#define CONFIG_SYS_HZ 1000
/* Network device */
#define CONFIG_DRIVER_NE2000
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 5426ee8720..9eb0a04da6 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -85,7 +85,6 @@
+ (8 * 1024 * 1024))
#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */
-#define CONFIG_SYS_HZ 1000 /* 1ms clock */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
@@ -113,7 +112,6 @@
/* Platform/Board specific defs */
#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550
diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
index b787270670..a87444e0b1 100644
--- a/include/configs/smdk2410.h
+++ b/include/configs/smdk2410.h
@@ -124,8 +124,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x30800000
-#define CONFIG_SYS_HZ 1000
-
/* support additional compression methods */
#define CONFIG_BZIP2
#define CONFIG_LZO
diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h
index 507a5d309e..c9a2e1568f 100644
--- a/include/configs/smdkc100.h
+++ b/include/configs/smdkc100.h
@@ -166,8 +166,6 @@
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5e00000)
#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_HZ 1000
-
/* SMDKC100 has 1 banks of DRAM, we use only one in U-Boot */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */
diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h
index 0496661b20..e2e8efe58c 100644
--- a/include/configs/smdkv310.h
+++ b/include/configs/smdkv310.h
@@ -101,8 +101,6 @@
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-#define CONFIG_SYS_HZ 1000
-
/* SMDKV310 has 4 bank of DRAM */
#define CONFIG_NR_DRAM_BANKS 4
#define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */
diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
index 17eb5f2455..988b68058b 100644
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@@ -20,7 +20,6 @@
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* External Crystal, in Hz */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
-#define CONFIG_SYS_HZ 1000
/* CPU */
#define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/snowball.h b/include/configs/snowball.h
index edc426aa0d..00d6fa5e89 100644
--- a/include/configs/snowball.h
+++ b/include/configs/snowball.h
@@ -27,7 +27,6 @@
#define CONFIG_SYS_MEMTEST_START 0x00000000
#define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF
-#define CONFIG_SYS_HZ 1000 /* must be 1000 */
/*-----------------------------------------------------------------------
* Size of environment and malloc() pool
diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h
index 346ca72327..dc74ad0dac 100644
--- a/include/configs/socfpga_cyclone5.h
+++ b/include/configs/socfpga_cyclone5.h
@@ -196,7 +196,6 @@
/* reload value when timer count to zero */
#define TIMER_LOAD_VAL 0xFFFFFFFF
/* Timer info */
-#define CONFIG_SYS_HZ 1000
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_TIMER_CLOCK_KHZ 2400
#else
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 1ff1112952..b6fbe23706 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -353,7 +353,6 @@
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buf Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
/*
* For booting Linux, the board info and command line data
diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h
index 92ec8f3d73..127de000f0 100644
--- a/include/configs/spc1920.h
+++ b/include/configs/spc1920.h
@@ -109,8 +109,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x00100000
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_SYS_BAUDRATE_TABLE { 2400, 4800, 9600, 19200 }
/*
diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
index c11c2b4d05..23f7ad77b6 100644
--- a/include/configs/spear-common.h
+++ b/include/configs/spear-common.h
@@ -47,7 +47,6 @@
#define CONFIG_I2C_CHIPADDRESS 0x50
/* Timer, HZ specific defines */
-#define CONFIG_SYS_HZ 1000
/* Flash configuration */
#if defined(CONFIG_FLASH_PNOR)
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index 90fc5996df..07668de4d9 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -401,8 +401,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#if defined(CONFIG_CMD_KGDB)
# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/stamp9g20.h b/include/configs/stamp9g20.h
index a9973315c2..7d6f62b326 100644
--- a/include/configs/stamp9g20.h
+++ b/include/configs/stamp9g20.h
@@ -35,7 +35,6 @@
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432MHz crystal */
-#define CONFIG_SYS_HZ 1000 /* 1ms resolution */
/* misc settings */
#define CONFIG_CMDLINE_TAG /* pass commandline to Kernel */
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index 100dae742e..9b3f0cc69f 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -331,7 +331,6 @@
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
/*
* For booting Linux, the board info and command line data
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index e82a4b1c6f..805814f4fb 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -366,7 +366,6 @@
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
/*
* For booting Linux, the board info and command line data
diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h
index ead67453b9..4e3b7277f4 100644
--- a/include/configs/stxxtc.h
+++ b/include/configs/stxxtc.h
@@ -132,8 +132,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h
index f98bdc855d..b4aa948565 100644
--- a/include/configs/svm_sc8xx.h
+++ b/include/configs/svm_sc8xx.h
@@ -158,8 +158,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h
index 3090b7eb4e..3f54f1423e 100644
--- a/include/configs/t4qds.h
+++ b/include/configs/t4qds.h
@@ -292,7 +292,6 @@
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks*/
/*
* For booting Linux, the board info and command line data
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 60dd8ff11a..683bc54a2c 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -169,7 +169,6 @@
*/
#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
/*
* Physical Memory Map
diff --git a/include/configs/tb0229.h b/include/configs/tb0229.h
index 132e299167..2901ed1eeb 100644
--- a/include/configs/tb0229.h
+++ b/include/configs/tb0229.h
@@ -109,8 +109,6 @@
#define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_TCLOCK_RATE/4)
-#define CONFIG_SYS_HZ 1000
-
#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_SYS_LOAD_ADDR 0x80400000 /* default load address */
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index ba6c6bb9f5..fc49acb28f 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -109,8 +109,6 @@
#define CONFIG_SYS_MEMTEST_START (NV_PA_SDRC_CS0 + 0x600000)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
-#define CONFIG_SYS_HZ 1000
-
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
index 2fc2c10676..ba16b1c14b 100644
--- a/include/configs/ti814x_evm.h
+++ b/include/configs/ti814x_evm.h
@@ -122,7 +122,6 @@
+ PHYS_DRAM_1_SIZE - (8 << 12))
#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default */
-#define CONFIG_SYS_HZ 1000 /* 1ms clock */
#define CONFIG_OMAP_GPIO
#define CONFIG_MMC
@@ -149,7 +148,6 @@
*/
#define CONFIG_SYS_TIMERBASE 0x4802E000
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
index e90490c750..b8c0d54ab3 100644
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@@ -60,7 +60,6 @@
#undef CONFIG_SYS_CLKS_IN_HZ
#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */
-#define CONFIG_SYS_HZ 1000 /* 1ms clock */
#define CONFIG_CMD_ASKEN
#define CONFIG_CMD_ECHO
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index e89e8744df..de83f7afc4 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -56,7 +56,6 @@
/* Timer information. */
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000 /* 1ms clock */
/* I2C IP block */
#define CONFIG_I2C
diff --git a/include/configs/titanium.h b/include/configs/titanium.h
index 0769f07e5d..0bb6731a26 100644
--- a/include/configs/titanium.h
+++ b/include/configs/titanium.h
@@ -194,7 +194,6 @@
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h
index 27efa69abc..48fcb24c4f 100644
--- a/include/configs/tnetv107x_evm.h
+++ b/include/configs/tnetv107x_evm.h
@@ -30,7 +30,6 @@
#define CONFIG_SYS_TIMERBASE TNETV107X_TIMER0_BASE
#define CONFIG_SYS_HZ_CLOCK clk_get_rate(TNETV107X_LPSC_TIMER0)
-#define CONFIG_SYS_HZ 1000
#define CONFIG_PLL_SYS_EXT_FREQ 25000000
#define CONFIG_PLL_TDM_EXT_FREQ 19200000
diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h
index f841ba828b..32f6b00bbf 100644
--- a/include/configs/tny_a9260.h
+++ b/include/configs/tny_a9260.h
@@ -40,7 +40,6 @@
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
diff --git a/include/configs/top9000.h b/include/configs/top9000.h
index a6d692872c..578ba56708 100644
--- a/include/configs/top9000.h
+++ b/include/configs/top9000.h
@@ -51,7 +51,6 @@
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */
-#define CONFIG_SYS_HZ 1000
/* Misc CPU related */
#define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/trats.h b/include/configs/trats.h
index f5bb6aa7f4..6ed3313265 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -228,8 +228,6 @@
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000)
-#define CONFIG_SYS_HZ 1000
-
/* TRATS has 4 banks of DRAM */
#define CONFIG_NR_DRAM_BANKS 4
#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index b102739a0e..d0cfd8e884 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -227,7 +227,6 @@
*/
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h
index 1b26c93221..0615117773 100644
--- a/include/configs/trizepsiv.h
+++ b/include/configs/trizepsiv.h
@@ -149,7 +149,6 @@
#define CONFIG_SYS_LOAD_ADDR 0xa1000000 /* default load address */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */
#ifdef CONFIG_MMC
diff --git a/include/configs/tt01.h b/include/configs/tt01.h
index 5942bdf21d..0937653fc2 100644
--- a/include/configs/tt01.h
+++ b/include/configs/tt01.h
@@ -239,8 +239,6 @@
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ 1000
-
#define CONFIG_CMDLINE_EDITING
/* MMC boot support */
diff --git a/include/configs/tx25.h b/include/configs/tx25.h
index b11f54e653..edd1f48f36 100644
--- a/include/configs/tx25.h
+++ b/include/configs/tx25.h
@@ -15,7 +15,6 @@
*/
#define CONFIG_MX25
#define CONFIG_MX25_CLK32 32000 /* OSC32K frequency */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 kB for U-Boot */
diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h
index 0c97ab1894..45d33a6896 100644
--- a/include/configs/u8500_href.h
+++ b/include/configs/u8500_href.h
@@ -16,7 +16,6 @@
#define CONFIG_SYS_MEMTEST_START 0x00000000
#define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF
-#define CONFIG_SYS_HZ 1000 /* must be 1000 */
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT
diff --git a/include/configs/uc100.h b/include/configs/uc100.h
index d9e6f931e4..cad897f70b 100644
--- a/include/configs/uc100.h
+++ b/include/configs/uc100.h
@@ -160,8 +160,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
/*
diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index 56a6773cbd..8e6e246460 100644
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -208,7 +208,6 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
*------------------------------------------------------------------*/
#define CONFIG_SYS_CLK_FREQ 33000000
-#define CONFIG_SYS_HZ 1000
/*#define CONFIG_SYS_ETH_DEV_FN 0x7800 */
/*#define CONFIG_SYS_ETH_IOBASE 0x00104000 */
diff --git a/include/configs/v37.h b/include/configs/v37.h
index cf50d337bb..0d01fe207e 100644
--- a/include/configs/v37.h
+++ b/include/configs/v37.h
@@ -124,8 +124,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index f51925647b..0c544350eb 100644
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -258,8 +258,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#if defined(CONFIG_CMD_KGDB)
# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/vct.h b/include/configs/vct.h
index 85a6c11137..99831169a3 100644
--- a/include/configs/vct.h
+++ b/include/configs/vct.h
@@ -28,7 +28,6 @@
#define CONFIG_MIPS32 /* MIPS 4Kc CPU core */
#define CPU_CLOCK_RATE 324000000 /* Clock for the MIPS core */
#define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_CLOCK_RATE / 2)
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SKIP_LOWLEVEL_INIT /* SDRAM is initialized by the bootstrap code */
diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h
index d6b636f481..5cf4ae5be8 100644
--- a/include/configs/ve8313.h
+++ b/include/configs/ve8313.h
@@ -350,7 +350,6 @@
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot arg Buffer size */
-#define CONFIG_SYS_HZ 1000 /* 1ms ticks */
/*
* For booting Linux, the board info and command line data
diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h
index 5598961aa7..23e2007745 100644
--- a/include/configs/vexpress_common.h
+++ b/include/configs/vexpress_common.h
@@ -117,7 +117,6 @@
#define CONFIG_SYS_MEMTEST_START V2M_BASE
#define CONFIG_SYS_MEMTEST_END 0x20000000
-#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index 0a2d6f249f..8d0a00dcd9 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -182,7 +182,6 @@
#define CONFIG_SYS_MEMTEST_END 0x87C00000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
/*
* Stack sizes
diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h
index b4eb101b8e..0457cdfcf0 100644
--- a/include/configs/virtlab2.h
+++ b/include/configs/virtlab2.h
@@ -138,8 +138,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/vision2.h b/include/configs/vision2.h
index 4744d7cb68..6891bf8b15 100644
--- a/include/configs/vision2.h
+++ b/include/configs/vision2.h
@@ -157,7 +157,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_HUSH_PARSER
diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h
index e171ae4c40..4c73134645 100644
--- a/include/configs/vl_ma2sc.h
+++ b/include/configs/vl_ma2sc.h
@@ -198,7 +198,6 @@
/* clocks */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock */
#define MHZ180
diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h
index 0b0c1e6052..734d13f005 100644
--- a/include/configs/vme8349.h
+++ b/include/configs/vme8349.h
@@ -396,7 +396,6 @@
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS 16 /* max num of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buf Size */
-#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */
/*
* For booting Linux, the board info and command line data
diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h
index e97a6bc4b1..c3ac612a8c 100644
--- a/include/configs/vpac270.h
+++ b/include/configs/vpac270.h
@@ -149,7 +149,6 @@
/*
* Clock Configuration
*/
-#define CONFIG_SYS_HZ 1000 /* Timer @ 3250000 Hz */
#define CONFIG_SYS_CPUSPEED 0x190 /* 312MHz */
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index fa27fb6b6b..e9c7e64bef 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -205,7 +205,6 @@
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h
index 8770e9c691..695bc230c0 100644
--- a/include/configs/woodburn_common.h
+++ b/include/configs/woodburn_common.h
@@ -151,9 +151,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
-
-
/*
* Stack sizes
*
diff --git a/include/configs/x600.h b/include/configs/x600.h
index 89cd501644..39540e3806 100644
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -20,7 +20,6 @@
#include <asm/arch/hardware.h>
/* Timer, HZ specific defines */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_HZ_CLOCK 8300000
#define CONFIG_SYS_TEXT_BASE 0x00800040
diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h
index 5f34fc7694..431ed96e29 100644
--- a/include/configs/xaeniax.h
+++ b/include/configs/xaeniax.h
@@ -116,7 +116,6 @@
#define CONFIG_SYS_LOAD_ADDR 0xa1000000 /* default load address */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 400/200/100 MHz */
/*
diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h
index f4f42c510d..0ccd73a868 100644
--- a/include/configs/xilinx-ppc.h
+++ b/include/configs/xilinx-ppc.h
@@ -64,7 +64,6 @@
/* default load address */
#define CONFIG_SYS_EXTBDINFO 1
/* Extended board_into (bd_t) */
-#define CONFIG_SYS_HZ 1000
/* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING /* add command line history */
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
diff --git a/include/configs/xpedite1000.h b/include/configs/xpedite1000.h
index af142186fa..eb193f8673 100644
--- a/include/configs/xpedite1000.h
+++ b/include/configs/xpedite1000.h
@@ -213,7 +213,6 @@ extern void out32(unsigned int, unsigned long);
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* Command-line editing */
#define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */
#define CONFIG_PANIC_HANG /* do not reset board on panic */
diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h
index 14b513f5c2..4738c23350 100644
--- a/include/configs/xpedite517x.h
+++ b/include/configs/xpedite517x.h
@@ -560,7 +560,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* Command-line editing */
#define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */
#define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */
diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h
index 150e731e7c..33428803eb 100644
--- a/include/configs/xpedite520x.h
+++ b/include/configs/xpedite520x.h
@@ -341,7 +341,6 @@
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
#define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */
diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
index d256a6036d..9da845d9a2 100644
--- a/include/configs/xpedite537x.h
+++ b/include/configs/xpedite537x.h
@@ -415,7 +415,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
#define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */
diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h
index bf54ef6253..4137cc9208 100644
--- a/include/configs/xpedite550x.h
+++ b/include/configs/xpedite550x.h
@@ -400,7 +400,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
#define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */
diff --git a/include/configs/zeus.h b/include/configs/zeus.h
index 9cfd9bb14d..9d58738ce8 100644
--- a/include/configs/zeus.h
+++ b/include/configs/zeus.h
@@ -137,8 +137,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h
index 765b849e25..2e7f14586a 100644
--- a/include/configs/zmx25.h
+++ b/include/configs/zmx25.h
@@ -12,7 +12,6 @@
#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_MX25
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_TEXT_BASE 0xA0000000
#define CONFIG_MACH_TYPE MACH_TYPE_ZMX25
diff --git a/include/configs/zynq.h b/include/configs/zynq.h
index b9f381f645..4c6e6e8f6a 100644
--- a/include/configs/zynq.h
+++ b/include/configs/zynq.h
@@ -12,7 +12,6 @@
/* CPU clock */
#define CONFIG_CPU_FREQ_HZ 800000000
-#define CONFIG_SYS_HZ 1000
/* Ram */
#define CONFIG_NR_DRAM_BANKS 1