summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/include/asm/arch-mx6/mx6sl_pins.h5
-rw-r--r--board/freescale/mx6slevk/mx6slevk.c49
-rw-r--r--board/freescale/mx6sxsabresd/mx6sxsabresd.c50
-rw-r--r--drivers/dfu/dfu.c29
-rw-r--r--drivers/usb/host/ehci-hcd.c1
-rw-r--r--drivers/usb/host/ehci-mx6.c27
-rw-r--r--include/configs/mx6slevk.h14
-rw-r--r--include/configs/mx6sxsabresd.h14
-rw-r--r--include/usb/ehci-fsl.h2
-rwxr-xr-xtest/ums/ums_gadget_test.sh10
10 files changed, 194 insertions, 7 deletions
diff --git a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
index d9db58c9a3..9ded3d851c 100644
--- a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
@@ -53,5 +53,10 @@ enum {
MX6_PAD_FEC_REF_CLK__FEC_REF_OUT = IOMUX_PAD(0x424, 0x134, 0x10, 0x000, 0, 0),
MX6_PAD_FEC_RX_ER__GPIO_4_19 = IOMUX_PAD(0x0428, 0x0138, 5, 0x0000, 0, 0),
MX6_PAD_FEC_TX_CLK__GPIO_4_21 = IOMUX_PAD(0x0434, 0x0144, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_PWRCOM__ANATOP_USBOTG1_ID = IOMUX_PAD(0x03D0, 0x00E0, 4, 0x05DC, 0, 0),
+
+ MX6_PAD_KEY_COL4__USB_USBOTG1_PWR = IOMUX_PAD(0x0484, 0x017C, 6, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL5__USB_USBOTG2_PWR = IOMUX_PAD(0x0488, 0x0180, 6, 0x0000, 0, 0),
};
#endif /* __ASM_ARCH_MX6_MX6SL_PINS_H__ */
diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
index cac6d73a7f..3834eec60e 100644
--- a/board/freescale/mx6slevk/mx6slevk.c
+++ b/board/freescale/mx6slevk/mx6slevk.c
@@ -20,6 +20,8 @@
#include <fsl_esdhc.h>
#include <mmc.h>
#include <netdev.h>
+#include <usb.h>
+#include <usb/ehci-fsl.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -238,6 +240,48 @@ static int setup_fec(void)
}
#endif
+#ifdef CONFIG_USB_EHCI_MX6
+#define USB_OTHERREGS_OFFSET 0x800
+#define UCTRL_PWR_POL (1 << 9)
+
+static iomux_v3_cfg_t const usb_otg_pads[] = {
+ /* OTG1 */
+ MX6_PAD_KEY_COL4__USB_USBOTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_EPDC_PWRCOM__ANATOP_USBOTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* OTG2 */
+ MX6_PAD_KEY_COL5__USB_USBOTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)
+};
+
+static void setup_usb(void)
+{
+ imx_iomux_v3_setup_multiple_pads(usb_otg_pads,
+ ARRAY_SIZE(usb_otg_pads));
+}
+
+int board_usb_phy_mode(int port)
+{
+ if (port == 1)
+ return USB_INIT_HOST;
+ else
+ return usb_phy_mode(port);
+}
+
+int board_ehci_hcd_init(int port)
+{
+ u32 *usbnc_usb_ctrl;
+
+ if (port > 1)
+ return -EINVAL;
+
+ usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
+ port * 4);
+
+ /* Set Power polarity */
+ setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
+
+ return 0;
+}
+#endif
int board_early_init_f(void)
{
@@ -256,6 +300,11 @@ int board_init(void)
#ifdef CONFIG_FEC_MXC
setup_fec();
#endif
+
+#ifdef CONFIG_USB_EHCI_MX6
+ setup_usb();
+#endif
+
return 0;
}
diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
index 8b959b9fc6..fd8bc72827 100644
--- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
+++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
@@ -26,6 +26,8 @@
#include <power/pmic.h>
#include <power/pfuze100_pmic.h>
#include "../common/pfuze.h"
+#include <usb.h>
+#include <usb/ehci-fsl.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -212,6 +214,49 @@ int power_init_board(void)
return 0;
}
+#ifdef CONFIG_USB_EHCI_MX6
+#define USB_OTHERREGS_OFFSET 0x800
+#define UCTRL_PWR_POL (1 << 9)
+
+static iomux_v3_cfg_t const usb_otg_pads[] = {
+ /* OGT1 */
+ MX6_PAD_GPIO1_IO09__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* OTG2 */
+ MX6_PAD_GPIO1_IO12__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)
+};
+
+static void setup_usb(void)
+{
+ imx_iomux_v3_setup_multiple_pads(usb_otg_pads,
+ ARRAY_SIZE(usb_otg_pads));
+}
+
+int board_usb_phy_mode(int port)
+{
+ if (port == 1)
+ return USB_INIT_HOST;
+ else
+ return usb_phy_mode(port);
+}
+
+int board_ehci_hcd_init(int port)
+{
+ u32 *usbnc_usb_ctrl;
+
+ if (port > 1)
+ return -EINVAL;
+
+ usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
+ port * 4);
+
+ /* Set Power polarity */
+ setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
+
+ return 0;
+}
+#endif
+
int board_phy_config(struct phy_device *phydev)
{
/*
@@ -242,6 +287,10 @@ int board_early_init_f(void)
/* Active high for ncp692 */
gpio_direction_output(IMX_GPIO_NR(4, 16) , 1);
+#ifdef CONFIG_USB_EHCI_MX6
+ setup_usb();
+#endif
+
return 0;
}
@@ -322,7 +371,6 @@ int board_mmc_init(bd_t *bis)
return 0;
}
-
int board_init(void)
{
/* Address of boot parameters */
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
index c0aba6e197..14cb366b01 100644
--- a/drivers/dfu/dfu.c
+++ b/drivers/dfu/dfu.c
@@ -544,10 +544,35 @@ struct dfu_entity *dfu_get_entity(int alt)
int dfu_get_alt(char *name)
{
struct dfu_entity *dfu;
+ char *str;
list_for_each_entry(dfu, &dfu_list, list) {
- if (!strncmp(dfu->name, name, strlen(dfu->name)))
- return dfu->alt;
+ if (dfu->name[0] != '/') {
+ if (!strncmp(dfu->name, name, strlen(dfu->name)))
+ return dfu->alt;
+ } else {
+ /*
+ * One must also consider absolute path
+ * (/boot/bin/uImage) available at dfu->name when
+ * compared "plain" file name (uImage)
+ *
+ * It is the case for e.g. thor gadget where lthor SW
+ * sends only the file name, so only the very last part
+ * of path must be checked for equality
+ */
+
+ str = strstr(dfu->name, name);
+ if (!str)
+ continue;
+
+ /*
+ * Check if matching substring is the last element of
+ * dfu->name (uImage)
+ */
+ if (strlen(dfu->name) ==
+ ((str - dfu->name) + strlen(name)))
+ return dfu->alt;
+ }
}
return -ENODEV;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 5520805af3..bc7606646b 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -971,7 +971,6 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
qh_list->qh_link = cpu_to_hc32((uint32_t)qh_list | QH_LINK_TYPE_QH);
qh_list->qh_endpt1 = cpu_to_hc32(QH_ENDPT1_H(1) |
QH_ENDPT1_EPS(USB_SPEED_HIGH));
- qh_list->qh_curtd = cpu_to_hc32(QT_NEXT_TERMINATE);
qh_list->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
qh_list->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
qh_list->qh_overlay.qt_token =
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index 9ec5a0a539..951dd3b25f 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -160,7 +160,7 @@ static int usb_phy_enable(int index, struct usb_ehci *ehci)
val |= (USBPHY_CTRL_ENUTMILEVEL2 | USBPHY_CTRL_ENUTMILEVEL3);
__raw_writel(val, phy_ctrl);
- return val & USBPHY_CTRL_OTG_ID;
+ return 0;
}
/* Base address for this IP block is 0x02184800 */
@@ -193,6 +193,28 @@ static void usb_oc_config(int index)
__raw_writel(val, ctrl);
}
+int usb_phy_mode(int port)
+{
+ void __iomem *phy_reg;
+ void __iomem *phy_ctrl;
+ u32 val;
+
+ phy_reg = (void __iomem *)phy_bases[port];
+ phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL);
+
+ val = __raw_readl(phy_ctrl);
+
+ if (val & USBPHY_CTRL_OTG_ID)
+ return USB_INIT_DEVICE;
+ else
+ return USB_INIT_HOST;
+}
+
+int __weak board_usb_phy_mode(int port)
+{
+ return usb_phy_mode(port);
+}
+
int __weak board_ehci_hcd_init(int port)
{
return 0;
@@ -221,7 +243,8 @@ int ehci_hcd_init(int index, enum usb_init_type init,
usb_power_config(index);
usb_oc_config(index);
usb_internal_phy_clock_gate(index, 1);
- type = usb_phy_enable(index, ehci) ? USB_INIT_DEVICE : USB_INIT_HOST;
+ usb_phy_enable(index, ehci);
+ type = board_usb_phy_mode(index);
*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
*hcor = (struct ehci_hcor *)((uint32_t)*hccr +
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index 271548c875..e3e7f7686b 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -209,6 +209,20 @@
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
#endif
+/* USB Configs */
+#define CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#endif
+
#define CONFIG_SYS_FSL_USDHC_NUM 3
#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC2*/
diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index 5e0edabf37..61a7a7a07e 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -198,6 +198,20 @@
#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS
+
+#define CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#endif
+
#define CONFIG_CMD_PCI
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI
diff --git a/include/usb/ehci-fsl.h b/include/usb/ehci-fsl.h
index 897018bf84..e9349b5c16 100644
--- a/include/usb/ehci-fsl.h
+++ b/include/usb/ehci-fsl.h
@@ -280,7 +280,9 @@ struct usb_ehci {
#define MXC_EHCI_IPPUE_DOWN (1 << 10)
#define MXC_EHCI_IPPUE_UP (1 << 11)
+int usb_phy_mode(int port);
/* Board-specific initialization */
int board_ehci_hcd_init(int port);
+int board_usb_phy_mode(int port);
#endif /* _EHCI_FSL_H */
diff --git a/test/ums/ums_gadget_test.sh b/test/ums/ums_gadget_test.sh
index 56d4616376..9da486b266 100755
--- a/test/ums/ums_gadget_test.sh
+++ b/test/ums/ums_gadget_test.sh
@@ -11,6 +11,7 @@ clear
COLOUR_RED="\33[31m"
COLOUR_GREEN="\33[32m"
+COLOUR_ORANGE="\33[33m"
COLOUR_DEFAULT="\33[0m"
DIR=./
@@ -59,8 +60,15 @@ ums_test_file () {
fi
cp ./$1 $MNT_DIR
- umount $MNT_DIR
+ while true; do
+ umount $MNT_DIR > /dev/null 2>&1
+ if [ $? -eq 0 ]; then
+ break
+ fi
+ printf "$COLOUR_ORANGE\tSleeping to wait for umount...$COLOUR_DEFAULT\n"
+ sleep 1
+ done
echo -n "TX: "
calculate_md5sum $1