summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/isee/igep00x0/igep00x0.c18
-rw-r--r--board/isee/igep00x0/igep00x0.h8
-rw-r--r--include/configs/omap3_igep00x0.h18
3 files changed, 19 insertions, 25 deletions
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
index 47522f8013..693fce741a 100644
--- a/board/isee/igep00x0/igep00x0.c
+++ b/board/isee/igep00x0/igep00x0.c
@@ -5,6 +5,7 @@
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <status_led.h>
#include <dm.h>
#include <ns16550.h>
#include <twl4030.h>
@@ -53,21 +54,12 @@ int board_init(void)
/* boot param addr */
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
- return 0;
-}
-
-#if defined(CONFIG_SHOW_BOOT_PROGRESS) && !defined(CONFIG_SPL_BUILD)
-void show_boot_progress(int val)
-{
- if (val < 0) {
- /* something went wrong */
- return;
- }
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
+ status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
+#endif
- if (!gpio_request(IGEP00X0_GPIO_LED, ""))
- gpio_direction_output(IGEP00X0_GPIO_LED, 1);
+ return 0;
}
-#endif
#ifdef CONFIG_SPL_BUILD
/*
diff --git a/board/isee/igep00x0/igep00x0.h b/board/isee/igep00x0/igep00x0.h
index 181f81f2a1..3c7ff9b148 100644
--- a/board/isee/igep00x0/igep00x0.h
+++ b/board/isee/igep00x0/igep00x0.h
@@ -7,14 +7,6 @@
#ifndef _IGEP00X0_H_
#define _IGEP00X0_H_
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
-#define IGEP00X0_GPIO_LED 27
-#endif
-
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
-#define IGEP00X0_GPIO_LED 16
-#endif
-
const omap3_sysinfo sysinfo = {
DDR_STACKED,
#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index b2b3750c1e..6295ec505f 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -29,11 +29,21 @@
#define CONFIG_REVISION_TAG 1
-/* define to enable boot progress via leds */
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
- (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
-#define CONFIG_SHOW_BOOT_PROGRESS
+/* Status LED */
+#define CONFIG_STATUS_LED
+#define CONFIG_BOARD_SPECIFIC_LED
+#define CONFIG_GPIO_LED
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
+#define RED_LED_GPIO 27
+#endif
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
+#define RED_LED_GPIO 16
#endif
+#define RED_LED_DEV 0
+#define STATUS_LED_BIT RED_LED_GPIO
+#define STATUS_LED_STATE STATUS_LED_ON
+#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
+#define STATUS_LED_BOOT RED_LED_DEV
/* GPIO banks */
#define CONFIG_OMAP3_GPIO_3 /* GPIO64 .. 95 is in GPIO bank 3 */