1 files changed, 123 insertions, 0 deletions
diff --git a/cpu/mips/au1x00_serial.c b/cpu/mips/au1x00_serial.c
new file mode 100644
index 0000000000..99e24897fd
--- /dev/null
+++ b/cpu/mips/au1x00_serial.c
@@ -0,0 +1,123 @@
+/*
+ * AU1X00 UART support
+ *
+ * Hardcoded to UART 0 for now
+ * Speed and options also hardcoded to 115200 8N1
+ *
+ *  Copyright (c) 2003	Thomas.Lange@corelatus.se
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+#ifdef CONFIG_AU1X00
+
+#include <common.h>
+#include <asm/au1x00.h>
+
+/******************************************************************************
+*
+* serial_init - initialize a channel
+*
+* This routine initializes the number of data bits, parity
+* and set the selected baud rate. Interrupts are disabled.
+* Set the modem control signals if the option is selected.
+*
+* RETURNS: N/A
+*/
+
+int serial_init (void)
+{
+	volatile u32 *uart_fifoctl = (volatile u32*)(UART0_ADDR+UART_FCR);
+	volatile u32 *uart_enable = (volatile u32*)(UART0_ADDR+UART_ENABLE);
+
+	/* Enable clocks first */
+	*uart_enable = UART_EN_CE;
+
+	/* Then release reset */
+	/* Must release reset before setting other regs */
+	*uart_enable = UART_EN_CE|UART_EN_E;
+
+	/* Activate fifos, reset tx and rx */
+	/* Set tx trigger level to 12 */
+	*uart_fifoctl = UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|
+		UART_FCR_CLEAR_XMIT|UART_FCR_T_TRIGGER_12;
+
+	serial_setbrg();
+
+	return 0;
+}
+
+
+void serial_setbrg (void)
+{
+	volatile u32 *uart_clk = (volatile u32*)(UART0_ADDR+UART_CLK);
+	volatile u32 *uart_lcr = (volatile u32*)(UART0_ADDR+UART_LCR);
+
+	/* Set baudrate to 115200 */
+	*uart_clk = 0x36;
+
+	/* Set parity, stop bits and word length to 8N1 */
+	*uart_lcr = UART_LCR_WLEN8;
+}
+
+void serial_putc (const char c)
+{
+	volatile u32 *uart_lsr = (volatile u32*)(UART0_ADDR+UART_LSR);
+	volatile u32 *uart_tx = (volatile u32*)(UART0_ADDR+UART_TX);
+
+	if (c == '\n') serial_putc ('\r');
+
+	/* Wait for fifo to shift out some bytes */
+	while((*uart_lsr&UART_LSR_THRE)==0);
+
+	*uart_tx = (u32)c;
+}
+
+void serial_puts (const char *s)
+{
+	while (*s)
+	{
+		serial_putc (*s++);
+	}
+}
+
+int serial_getc (void)
+{
+	volatile u32 *uart_rx = (volatile u32*)(UART0_ADDR+UART_RX);
+	char c;
+
+	while (!serial_tstc());
+
+	c = (*uart_rx&0xFF);
+	return c;
+}
+
+int serial_tstc (void)
+{
+	volatile u32 *uart_lsr = (volatile u32*)(UART0_ADDR+UART_LSR);
+
+	if(*uart_lsr&UART_LSR_DR){
+		/* Data in rfifo */
+		return(1);
+	}
+	return 0;
+}
+#endif /* CONFIG_SERIAL_AU1X00 */