diff options
Diffstat (limited to 'cpu/mpc8220/dramSetup.c')
| -rw-r--r-- | cpu/mpc8220/dramSetup.c | 20 |
1 files changed, 12 insertions, 8 deletions
diff --git a/cpu/mpc8220/dramSetup.c b/cpu/mpc8220/dramSetup.c index 033b71966c..90a7183106 100644 --- a/cpu/mpc8220/dramSetup.c +++ b/cpu/mpc8220/dramSetup.c @@ -32,9 +32,9 @@ characteristics to initialize the dram on MPC8220 #include "i2cCore.h" #include "dramSetup.h" -#define SPD_SIZE 0x40 -#define DRAM_SPD 0xA2 /* on Board SPD eeprom */ -#define TOTAL_BANK 2 +#define SPD_SIZE CFG_SDRAM_SPD_SIZE +#define DRAM_SPD (CFG_SDRAM_SPD_I2C_ADDR)<<1 /* on Board SPD eeprom */ +#define TOTAL_BANK CFG_SDRAM_TOTAL_BANKS int spd_status (volatile i2c8220_t * pi2c, u8 sta_bit, u8 truefalse) { @@ -144,7 +144,7 @@ int readSpdData (u8 * spdData) break; } - pi2cReg->adr = 0x90; /* I2C device address */ + pi2cReg->adr = CFG_I2C_SLAVE<<1; pi2cReg->cr = I2C_CTL_EN; /* Set Enable */ @@ -569,7 +569,7 @@ u32 dramSetup (void) cfg_value |= CFG1_SWT2RWP ((type == TYPE_DDR) ? 7 : 2); /* Set the Read CAS latency. We're going to use a CL of - * 2 for DDR and SDR. + * 2.5 for DDR and 2 SDR. */ cfg_value |= CFG1_RLATENCY ((type == TYPE_DDR) ? 7 : 2); @@ -685,10 +685,14 @@ u32 dramSetup (void) } - /* Set up mode value for CAS latency == 2 */ + /* Set up mode value for CAS latency */ +#if (CFG_SDRAM_CAS_LATENCY==5) /* CL=2.5 */ + mode_value = (MODE_MODE | MODE_BURSTLEN (MODE_BURSTLEN_8) | + MODE_BT_SEQUENTIAL | MODE_CL (MODE_CL_2p5) | MODE_CMD); +#else mode_value = (MODE_MODE | MODE_BURSTLEN (MODE_BURSTLEN_8) | MODE_BT_SEQUENTIAL | MODE_CL (MODE_CL_2) | MODE_CMD); - +#endif asm volatile ("sync"); /* Write Extended Mode - enable DLL */ @@ -698,7 +702,7 @@ u32 dramSetup (void) memctl->mode = (temp >> 16); /* mode */ asm volatile ("sync"); - /* Write Mode - reset DLL, set CAS latency == 2 */ + /* Write Mode - reset DLL, set CAS latency */ temp = mode_value | MODE_OPMODE (MODE_OPMODE_RESETDLL); memctl->mode = (temp >> 16); /* mode */ asm volatile ("sync"); |